now possible to make prod image (assembly tests at first boot) with make image-prod

FunKey/board/funkey/rootfs-overlay/usr/local/sbin/assembly_tests

@@ -1,10 +1,8 @@
 #!/bin/sh
 
 ## Check if tests must be run
-RUN_FILE=/mnt/.assembly_tests
 RUN_ENV_VAR=$(fw_printenv -n assembly_tests 2>/dev/null)
-if [ ! -f ${RUN_FILE} -a "x${RUN_ENV_VAR}" != "x1" ]; then
-    #echo "${RUN_FILE} not present, not performing assembly tests."
+if [ "x${RUN_ENV_VAR}" != "x1" ]; then
     exit 0
 fi
 
@@ -360,7 +358,7 @@ ro
 ## Exit processes
 if ! $test_failed; then
 	## Remove run file => no assembly tests on next run
-	rm -f ${RUN_FILE}
+	fw_setenv assembly_tests 0
 	sync
 	exit 0
 else

FunKey/board/funkey/rootfs-overlay/usr/local/sbin/first_boot

@@ -129,9 +129,10 @@ format_backing_store_partition () {
 }
 
 copy_files_to_store_partition () {
-    # Add file to force assembly tests 
+    # Add file to force assembly tests
+    
+    
     mount /mnt/ || die 18 "Cannot mount /mnt"
-    #touch /mnt/.assembly_tests || die 19 "Cannot create assembly tests run file"
     unzip -q -o /usr/local/share/mnt_freware_games.zip -d /mnt/
     umount /mnt/ || die 20 "Cannot unmount /mnt"
     return 0

FunKey/board/funkey/rootfs-overlay/usr/local/sbin/sched_shutdown

@@ -9,7 +9,7 @@ nb_secs_to_wait=$1
 
 # Wait $nb_secs_to_wait seconds to catch signal USR2
 # If the signal is caught, then it means a process canceled this shutdown
-sleep ${nbl_secs_to_wait}
+sleep ${nb_secs_to_wait}
 
 # Too late to cancel: init shutdown
 shutdown_funkey

FunKey/board/funkey/rootfs-overlay/usr/local/sbin/signal_usr1_to_emulators

@@ -2,8 +2,8 @@
 # This should replaced by storing the correct PID before 
 # launching an emulator and signaling only this one.
 
-
-if [[ -f /mnt/.assembly_tests ]]; then
+RUN_ENV_VAR=$(fw_printenv -n assembly_tests 2>/dev/null)
+if [ "x${RUN_ENV_VAR}" == "x1" ]; then
 	# First this one
 	killall -s USR1 assembly_tests > /dev/null 2>&1
 

Makefile

@@ -81,6 +81,14 @@ image: fun
 	@./Recovery/output/host/bin/genimage --loglevel 0 --inputpath .
 	@rm -rf root tmp
 
+
+image-prod: fun
+	@$(call MESSAGE,"Creating disk image")
+	@rm -rf root tmp
+	@mkdir -p root tmp
+	@./Recovery/output/host/bin/genimage --loglevel 0 --config "genimage-prod.cfg" --inputpath .
+	@rm -rf root tmp
+
 update: fun
 	@$(call MESSAGE,"Creating update file")
 	@rm -rf tmp

Recovery/board/funkey/post-build.sh

@@ -22,5 +22,11 @@ mv ${TARGET_DIR}/etc/init.d/S50dropbear ${TARGET_DIR}/etc/init.d/S42dropbear
 rm -rf ${TARGET_DIR}/etc/dropbear
 ln -s /tmp ${TARGET_DIR}/etc/dropbear
 
-# Generate U-Boot environment
+# Generate U-Boot environment for app
 ${HOST_DIR}/bin/mkenvimage -p 0x0 -s 0x20000 -o ${BINARIES_DIR}/u-boot-env.img ${TARGET_DIR}/etc/u-boot.env
+
+# Generate U-Boot environment for production
+cp ${TARGET_DIR}/etc/u-boot.env ${TARGET_DIR}/etc/u-boot-prod.env
+echo "assembly_tests=1" >> ${TARGET_DIR}/etc/u-boot-prod.env
+${HOST_DIR}/bin/mkenvimage -p 0x0 -s 0x20000 -o ${BINARIES_DIR}/u-boot-env-prod.img ${TARGET_DIR}/etc/u-boot-prod.env
+rm ${TARGET_DIR}/etc/u-boot-prod.env

Recovery/board/funkey/rootfs-overlay/etc/funkey_gpio_mapping.conf

@@ -53,7 +53,7 @@
 7+13, SHELL_COMMAND, quick_action_volume_down, Fn+A, Volume--
 7+11, SHELL_COMMAND, quick_action_bright_up, Fn+B, Brightness++
 7+14, SHELL_COMMAND, quick_action_bright_down, Fn+X, Brightness--
-10, SHELL_COMMAND, sched_shutdown 1 & signal_usr1_to_emulators, N_OE, Quick save and Poweroff because of N_OE
+10, SHELL_COMMAND, shutdown_funkey, N_OE, Poweroff because of N_OE
 7+15+2, SHELL_COMMAND, display_notif_system_stats, Fn+L1+L2, display system cpu and ram usage
 
 #7+12, KEYBOARD, KEY_G, KEY_G, Brightness++

Recovery/board/funkey/rootfs-overlay/usr/local/sbin/menu

@@ -62,9 +62,9 @@ menu_display () {
 
 	    # Factory tests enable/disable
 	    if [ -e /mnt/.assembly_tests ]; then
-		message=" FACTORY TESTS DISABLE"
+			message=" FACTORY TESTS DISABLE"
 	    else
-		message=" FACTORY TESTS ENABLE"
+			message=" FACTORY TESTS ENABLE"
 	    fi
 	    ;;
 
@@ -223,21 +223,15 @@ menu_run () {
 	6)
 
 	    # Factory tests enable/disable
-	    mount | grep -q /dev/mmcblk0p4
-	    if [ $? -eq 0 ]; then
-		if [ -e /mnt/.assembly_tests ]; then
-		    rm -f /mnt/.assembly_tests
+	    RUN_ENV_VAR=$(fw_printenv -n assembly_tests 2>/dev/null)
+		if [ "x${RUN_ENV_VAR}" == "x1" ]; then
 		    fw_setenv assembly_tests 0
 		    message=" FACTORY TESTS ENABLE"
 		else
-		    #touch /mnt/.assembly_tests
 		    fw_setenv assembly_tests 1
 		    message=" FACTORY TESTS DISABLE"
 		fi
 		notif "${message}"
-	    else
-		notif "${message}...^CANNOT TEST IF MOUNTED!"
-	    fi
 	    ;;
 
 	7)