Mirror of EspoTek/Labrador@github.com - Drivers and firmware for the Labrador board
Go to file
Chris Esposito 768a8353d7
Update PCB readme to give credit to Ele4nor
2018-11-25 11:10:21 +11:00
AVR_Code FIrmware version 0006: Fixes issue with logic analyzer channels being 2.6us out of sync 2018-11-06 09:14:13 +11:00
Desktop_Interface std::abs() => abs in espoSpinbox 2018-11-07 20:22:02 +11:00
Librador_API Android code fixed and Librador in place. 2018-05-19 15:23:22 +10:00
PCB Update PCB readme to give credit to Ele4nor 2018-11-25 11:10:21 +11:00
build_scripts OSX info.plist 2018-10-30 07:33:40 +11:00
.appveyor.yml yml env 2018-11-22 20:27:49 +11:00
.gitignore Librador no longer links against Qt5. Octave is happy about that. 2018-05-01 14:59:43 +10:00
.travis.yml changed location of Labrador.dmg in yaml 2018-11-07 21:42:04 +11:00
README.md Update README.md 2018-07-19 19:55:50 +10:00
pinout.svg Added demo skeleton for librador 2018-03-28 14:23:34 +11:00

README.md

What is it?

The EspoTek Labrador is an open-source board that converts your PC, Raspberry Pi or Android Smartphone and into a full-featured electronics lab bench, complete with oscilloscope, signal generator and more.

More information available at: http://espotek.com/labrador

This repo hosts all of the software and hardware that makes Labrador possible.

Documentation and Software

To download binary (executable) versions of the software, go to:

https://github.com/espotek/labrador/releases

For the documentation, please visit:

https://github.com/espotek/labrador/wiki

Licence

All software files are licenced under GNU GPL v3. https://www.gnu.org/licenses/gpl.html

All hardware files (schematics, PCB) are licenced under Creative Commons 4.0 (CC BY-NC-SA). https://creativecommons.org/licenses/by-nc-sa/4.0/

Building from Source

I use Qt Creator to build the software interface. https://www.qt.io/download-open-source/ Open Desktop_Interface/Labrador.pro, then Clean All -> Run qmake -> Build All. If you're on Linux (including Raspberry Pi), then you can also build the software from source by cloning the repo, cd'ing to the Desktop_Interface directory then running:

qmake
make
sudo make install

Then, to launch, just type "labrador" into the terminal.

To build the AVR software, I use Atmel Studio 7. Just load up the .atsln and push F7. You can use avr-gcc if you don't want to install a full IDE.

The PCB files can be edited in KiCAD 4.0.

Known bugs.

Most of the main bugs have now been fixed, including all synchronisation issues. Please open an issue if you're aware of any in particular.

Collaboration

If you want to make any suggestions, or better yet, submit some code, please do so here at GitHub.

Suggestions and feature requests belong on the "Issues" page.

For code submissions, look into Pull Requests. Or you can open an issue. I'm not picky. :)

If you just want to say hello and remind me that people are actually using my product, please email admin@espotek.com

Thanks to all.

~Chris