diff --git a/Raspberry-Pi.md b/Raspberry-Pi.md index 7172b9b..42ec17c 100644 --- a/Raspberry-Pi.md +++ b/Raspberry-Pi.md @@ -55,46 +55,29 @@ Once you're done and everything went successfully, you will be greeted by Raspbe Go to [AdGuard Home page](https://github.com/AdguardTeam/AdGuardHome#installation) and download binaries for Raspberry Pi. -At the time of writing this guide, the latest version is v0.92-hotfix1. +At the time of writing this guide, the latest version is v0.93. Let's download AdGuard Home and unpack it: ```bash cd $HOME -wget https://github.com/AdguardTeam/AdGuardHome/releases/download/v0.92-hotfix1/AdGuardHome_v0.92-hotfix1_linux_arm.tar.gz -tar xvf AdGuardHome_v0.92-hotfix1_linux_arm.tar.gz +wget https://github.com/AdguardTeam/AdGuardHome/releases/download/v0.93/AdGuardHome_v0.93_linux_arm.tar.gz +tar xvf AdGuardHome_v0.93_linux_arm.tar.gz ``` It will unpack into a new directory called `AdGuardHome`. -Now let's make it launch on Raspberry Pi's boot: +All you have to do is simply type this command to the Terminal: + ```bash -sudo nano /etc/systemd/system/adguard-home.service +sudo ./AdGuardHome -s install ``` -Fill the file contents with this: -```ini -[Unit] -Description=AdGuard Home -After=syslog.target -After=network.target +Here are the other commands you might need to control the service. -[Service] -Type=simple -User=root -Group=root -WorkingDirectory=/home/pi/AdGuardHome -ExecStart=/home/pi/AdGuardHome/AdGuardHome --host 192.168.10.20 -Restart=always - -[Install] -WantedBy=multi-user.target -``` -**NOTE**: Don't forget to replace `192.168.10.20` with IP of your Pi. - -After you're done with that, let's enable and start AdGuard Home: -```bash -sudo systemctl enable adguard-home -sudo systemctl start adguard-home -``` +* `AdGuardHome -s uninstall` - uninstalls the AdGuard Home service. +* `AdGuardHome -s start` - starts the service. +* `AdGuardHome -s stop` - stops the service. +* `AdGuardHome -s restart` - restarts the service. +* `AdGuardHome -s status` - shows the current service status. ## Visit the web interface Once it's up and running, you can access your AdGuard Home web interface on port 3000 by typing this in your browser — `http://192.168.10.20:3000/` diff --git a/VPS.md b/VPS.md index 99125f9..2cf9074 100644 --- a/VPS.md +++ b/VPS.md @@ -1,4 +1,6 @@ -To run AdGuard Home on a VPS, you need a server with Debian 8 or 9, x64 or x32. +To run AdGuard Home on a VPS, you need a server with Debian 8 or 9, x64 or x32. + +>Among possible solutions are [Vultr](https://www.vultr.com/), [1&1](https://www.1and1.co.uk/dynamic-cloud-server#configure-server), [Cloudways](https://www.cloudways.com/), [HostGator](https://hostgator.com/), [Digital Ocean](https://www.digitalocean.com/), [Bytemark](https://www.bytemark.co.uk/cloud-hosting/) and many more. AdGuard is not affiliated with any of these or other VPS services. ## Initial installation @@ -9,12 +11,12 @@ apt-get install sudo nano bind9-host Go to [AdGuard Home page](https://github.com/AdguardTeam/AdGuardHome#installation) and download binaries for your architecture (64-bit Linux in this example). -As of the time of writing, the latest version is v0.92-hotfix1. +As of the time of writing, the latest version is v0.93. To download AdGuard Home and unpack it execute following commands: ```bash -wget https://github.com/AdguardTeam/AdGuardHome/releases/download/v0.92-hotfix1/AdGuardHome_v0.92-hotfix1_linux_amd64.tar.gz -tar xvf AdGuardHome_v0.92-hotfix1_linux_amd64.tar.gz +wget https://github.com/AdguardTeam/AdGuardHome/releases/download/v0.93/AdGuardHome_v0.93_linux_amd64.tar.gz +tar xvf AdGuardHome_v0.93_linux_amd64.tar.gz ``` You can find out the directory where you've unpacked it to by running these commands: @@ -23,37 +25,15 @@ cd AdGuardHome pwd ``` -In this example it is `/root/AdGuardHome`, now let's make it run on VPS boot: -```bash -sudo nano /etc/systemd/system/adguard-home.service -``` +Run `sudo ./AdGuardHome -s install` to install AdGuard Home as a system service. -A file will be opened, fill the file contents with this text: -```ini -[Unit] -Description=AdGuard Home -After=syslog.target -After=network.target +Here are the other commands you might need to control the service. -[Service] -Type=simple -User=root -Group=root -WorkingDirectory=/root/AdGuardHome -ExecStart=/root/AdGuardHome/AdGuardHome --host 0.0.0.0 -Restart=always - -[Install] -WantedBy=multi-user.target -``` - -Note that I've used `/root/AdGuardHome` in that file, replace both instances with your own values there. Write to the file and close it. - -After you're done with that, let's enable and start AdGuard Home: -```bash -sudo systemctl enable adguard-home -sudo systemctl start adguard-home -``` +* `AdGuardHome -s uninstall` - uninstalls the AdGuard Home service. +* `AdGuardHome -s start` - starts the service. +* `AdGuardHome -s stop` - stops the service. +* `AdGuardHome -s restart` - restarts the service. +* `AdGuardHome -s status` - shows the current service status. You can verify that it's working properly by running this command: ```bash @@ -77,33 +57,4 @@ Replace 1.2.3.4 with the IP address of your VPS. ## Configure your devices to use your AdGuard Home -Now, once you've established that AdGuard Home works on your VPS, you can use it on your machine by changing system DNS settings to use your VPS's public IP address. - -## (optional) Password-protect web interface - -You have an option to password-protect your AdGuard Home's web interface so only you can access it. - -To do so, stop it first: -```bash -sudo systemctl stop adguard-home -``` - -Then edit `/root/AdGuardHome/AdGuardHome.yaml` (substitute this path with your own as appropriate): -```bash -sudo nano /root/AdGuardHome/AdGuardHome.yaml -``` - -Find lines containing `auth_name: ""` and `auth_pass: ""` and replace them with username and password: -```ini -auth_name: "your-secret-name" -auth_pass: "your-secret-password" -``` - -Substitute name and password with your own, of course. - -After you're done editing, save the file and start your AdGuard Home again: -```bash -sudo systemctl start adguard-home -``` - -After that, visiting web interface in a browser will require entering username and password. \ No newline at end of file +Now, once you've established that AdGuard Home works on your VPS, you can use it on your machine by changing system DNS settings to use your VPS's public IP address. \ No newline at end of file