Tasmota/sonoff/xdrv_07_domoticz.ino

518 lines
19 KiB
Arduino
Raw Normal View History

2017-01-28 13:41:01 +00:00
/*
xdrv_07_domoticz.ino - domoticz support for Sonoff-Tasmota
2017-01-28 13:41:01 +00:00
Copyright (C) 2018 Theo Arends
2017-01-28 13:41:01 +00:00
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
2017-01-28 13:41:01 +00:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
2017-01-28 13:41:01 +00:00
*/
#ifdef USE_DOMOTICZ
#define XDRV_07 7
const char DOMOTICZ_MESSAGE[] PROGMEM = "{\"idx\":%d,\"nvalue\":%d,\"svalue\":\"%s\",\"Battery\":%d,\"RSSI\":%d}";
enum DomoticzCommands { CMND_IDX, CMND_KEYIDX, CMND_SWITCHIDX, CMND_SENSORIDX, CMND_UPDATETIMER };
const char kDomoticzCommands[] PROGMEM = D_CMND_IDX "|" D_CMND_KEYIDX "|" D_CMND_SWITCHIDX "|" D_CMND_SENSORIDX "|" D_CMND_UPDATETIMER ;
//enum DomoticzSensors {DZ_TEMP, DZ_TEMP_HUM, DZ_TEMP_HUM_BARO, DZ_POWER_ENERGY, DZ_ILLUMINANCE, DZ_COUNT, DZ_VOLTAGE, DZ_CURRENT, DZ_AIRQUALITY, DZ_MAX_SENSORS};
#if MAX_DOMOTICZ_SNS_IDX < DZ_MAX_SENSORS
#error "Domoticz: Too many sensors or change settings.h layout"
#endif
const char kDomoticzSensors[] PROGMEM =
D_DOMOTICZ_TEMP "|" D_DOMOTICZ_TEMP_HUM "|" D_DOMOTICZ_TEMP_HUM_BARO "|" D_DOMOTICZ_POWER_ENERGY "|" D_DOMOTICZ_ILLUMINANCE "|" D_DOMOTICZ_COUNT "|" D_DOMOTICZ_VOLTAGE "|" D_DOMOTICZ_CURRENT "|" D_DOMOTICZ_AIRQUALITY ;
2017-01-28 13:41:01 +00:00
const char S_JSON_DOMOTICZ_COMMAND_INDEX_NVALUE[] PROGMEM = "{\"" D_CMND_DOMOTICZ "%s%d\":%d}";
const char S_JSON_DOMOTICZ_COMMAND_INDEX_LVALUE[] PROGMEM = "{\"" D_CMND_DOMOTICZ "%s%d\":%lu}";
char domoticz_in_topic[] = DOMOTICZ_IN_TOPIC;
char domoticz_out_topic[] = DOMOTICZ_OUT_TOPIC;
boolean domoticz_subscribe = false;
2017-01-28 13:41:01 +00:00
int domoticz_update_timer = 0;
byte domoticz_update_flag = 1;
2018-11-14 13:32:09 +00:00
int DomoticzBatteryQuality(void)
{
// Battery 0%: ESP 2.6V (minimum operating voltage is 2.5)
// Battery 100%: ESP 3.6V (maximum operating voltage is 3.6)
// Battery 101% to 200%: ESP over 3.6V (means over maximum operating voltage)
int quality = 0; // Voltage range from 2,6V > 0% to 3,6V > 100%
uint16_t voltage = ESP.getVcc();
if (voltage <= 2600) {
quality = 0;
} else if (voltage >= 4600) {
quality = 200;
} else {
quality = (voltage - 2600) / 10;
}
return quality;
}
2018-11-14 13:32:09 +00:00
int DomoticzRssiQuality(void)
{
// RSSI range: 0% to 10% (12 means disable RSSI in Domoticz)
return WifiGetRssiAsQuality(WiFi.RSSI()) / 10;
}
void MqttPublishDomoticzPowerState(byte device)
2017-01-28 13:41:01 +00:00
{
char sdimmer[8];
if ((device < 1) || (device > devices_present)) {
device = 1;
}
if (Settings.flag.mqtt_enabled && Settings.domoticz_relay_idx[device -1]) {
snprintf_P(sdimmer, sizeof(sdimmer), PSTR("%d"), Settings.light_dimmer);
snprintf_P(mqtt_data, sizeof(mqtt_data), DOMOTICZ_MESSAGE,
Settings.domoticz_relay_idx[device -1], (power & (1 << (device -1))) ? 1 : 0, (light_type) ? sdimmer : "", DomoticzBatteryQuality(), DomoticzRssiQuality());
MqttPublish(domoticz_in_topic);
2017-01-28 13:41:01 +00:00
}
}
void DomoticzUpdatePowerState(byte device)
2017-01-28 13:41:01 +00:00
{
if (domoticz_update_flag) {
MqttPublishDomoticzPowerState(device);
}
domoticz_update_flag = 1;
2017-01-28 13:41:01 +00:00
}
2018-11-14 13:32:09 +00:00
void DomoticzMqttUpdate(void)
2017-01-28 13:41:01 +00:00
{
if (domoticz_subscribe && (Settings.domoticz_update_timer || domoticz_update_timer)) {
2017-01-28 13:41:01 +00:00
domoticz_update_timer--;
if (domoticz_update_timer <= 0) {
domoticz_update_timer = Settings.domoticz_update_timer;
for (byte i = 1; i <= devices_present; i++) {
MqttPublishDomoticzPowerState(i);
}
2017-01-28 13:41:01 +00:00
}
}
}
2018-11-14 13:32:09 +00:00
void DomoticzMqttSubscribe(void)
2017-01-28 13:41:01 +00:00
{
uint8_t maxdev = (devices_present > MAX_DOMOTICZ_IDX) ? MAX_DOMOTICZ_IDX : devices_present;
for (byte i = 0; i < maxdev; i++) {
if (Settings.domoticz_relay_idx[i]) {
domoticz_subscribe = true;
}
}
if (domoticz_subscribe) {
2017-01-28 13:41:01 +00:00
char stopic[TOPSZ];
snprintf_P(stopic, sizeof(stopic), PSTR("%s/#"), domoticz_out_topic); // domoticz topic
MqttSubscribe(stopic);
2017-01-28 13:41:01 +00:00
}
}
/*
* ArduinoJSON Domoticz Switch entry used to calculate jsonBuf: JSON_OBJECT_SIZE(11) + 129 = 313
{
"Battery" : 255,
"RSSI" : 12,
"dtype" : "Light/Switch",
"id" : "000140E7",
"idx" : 159,
"name" : "Sonoff1",
"nvalue" : 1,
"stype" : "Switch",
"svalue1" : "0",
"switchType" : "Dimmer",
"unit" : 1
}
* Fail on this one
{
"LastUpdate" : "2018-10-02 20:39:45",
"Name" : "Sfeerverlichting",
"Status" : "Off",
"Timers" : "true",
"Type" : "Group",
"idx" : "2"
}
*/
2018-11-14 13:32:09 +00:00
boolean DomoticzMqttData(void)
2017-01-28 13:41:01 +00:00
{
char stemp1[10];
2017-01-28 13:41:01 +00:00
unsigned long idx = 0;
int16_t nvalue = -1;
int16_t found = 0;
2017-01-28 13:41:01 +00:00
domoticz_update_flag = 1;
if (!strncmp(XdrvMailbox.topic, domoticz_out_topic, strlen(domoticz_out_topic))) {
if (XdrvMailbox.data_len < 20) {
return 1;
}
StaticJsonBuffer<400> jsonBuf;
JsonObject& domoticz = jsonBuf.parseObject(XdrvMailbox.data);
if (!domoticz.success()) {
return 1;
}
// if (strcmp_P(domoticz["dtype"],PSTR("Light/Switch"))) {
// return 1;
// }
idx = domoticz["idx"];
if (domoticz.containsKey("nvalue")) {
nvalue = domoticz["nvalue"];
}
2017-01-28 13:41:01 +00:00
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DOMOTICZ "idx %d, nvalue %d"), idx, nvalue);
AddLog(LOG_LEVEL_DEBUG_MORE);
2017-01-28 13:41:01 +00:00
if ((idx > 0) && (nvalue >= 0) && (nvalue <= 15)) {
uint8_t maxdev = (devices_present > MAX_DOMOTICZ_IDX) ? MAX_DOMOTICZ_IDX : devices_present;
for (byte i = 0; i < maxdev; i++) {
if (idx == Settings.domoticz_relay_idx[i]) {
bool iscolordimmer = strcmp_P(domoticz["dtype"],PSTR("Color Switch")) == 0;
2017-01-28 13:41:01 +00:00
snprintf_P(stemp1, sizeof(stemp1), PSTR("%d"), i +1);
if (iscolordimmer && 10 == nvalue) { // Color_SetColor
JsonObject& color = domoticz["Color"];
uint16_t level = nvalue = domoticz["svalue1"];
uint16_t r = color["r"]; r = r * level / 100;
uint16_t g = color["g"]; g = g * level / 100;
uint16_t b = color["b"]; b = b * level / 100;
uint16_t cw = color["cw"]; cw = cw * level / 100;
uint16_t ww = color["ww"]; ww = ww * level / 100;
snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_COLOR));
snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%02x%02x%02x%02x%02x"), r, g, b, cw, ww);
found = 1;
} else if ((!iscolordimmer && 2 == nvalue) || // gswitch_sSetLevel
(iscolordimmer && 15 == nvalue)) { // Color_SetBrightnessLevel
if (domoticz.containsKey("svalue1")) {
nvalue = domoticz["svalue1"];
} else {
return 1;
}
if (light_type && (Settings.light_dimmer == nvalue) && ((power >> i) &1)) {
return 1;
}
snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_DIMMER));
snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), nvalue);
2017-01-28 13:41:01 +00:00
found = 1;
} else if (1 == nvalue || 0 == nvalue) {
if (((power >> i) &1) == (power_t)nvalue) {
return 1;
}
snprintf_P(XdrvMailbox.topic, XdrvMailbox.index, PSTR("/" D_CMND_POWER "%s"), (devices_present > 1) ? stemp1 : "");
snprintf_P(XdrvMailbox.data, XdrvMailbox.data_len, PSTR("%d"), nvalue);
2017-01-28 13:41:01 +00:00
found = 1;
}
break;
}
}
}
if (!found) {
return 1;
}
2017-01-28 13:41:01 +00:00
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DOMOTICZ D_RECEIVED_TOPIC " %s, " D_DATA " %s"), XdrvMailbox.topic, XdrvMailbox.data);
AddLog(LOG_LEVEL_DEBUG_MORE);
2017-01-28 13:41:01 +00:00
domoticz_update_flag = 0;
}
return 0;
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
2018-11-14 13:32:09 +00:00
boolean DomoticzCommand(void)
2017-01-28 13:41:01 +00:00
{
char command [CMDSZ];
boolean serviced = true;
uint8_t dmtcz_len = strlen(D_CMND_DOMOTICZ); // Prep for string length change
if (!strncasecmp_P(XdrvMailbox.topic, PSTR(D_CMND_DOMOTICZ), dmtcz_len)) { // Prefix
int command_code = GetCommandCode(command, sizeof(command), XdrvMailbox.topic +dmtcz_len, kDomoticzCommands);
if (-1 == command_code) {
serviced = false; // Unknown command
}
else if ((CMND_IDX == command_code) && (XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) {
if (XdrvMailbox.payload >= 0) {
Settings.domoticz_relay_idx[XdrvMailbox.index -1] = XdrvMailbox.payload;
restart_flag = 2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_DOMOTICZ_COMMAND_INDEX_LVALUE, command, XdrvMailbox.index, Settings.domoticz_relay_idx[XdrvMailbox.index -1]);
2017-01-28 13:41:01 +00:00
}
else if ((CMND_KEYIDX == command_code) && (XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) {
if (XdrvMailbox.payload >= 0) {
Settings.domoticz_key_idx[XdrvMailbox.index -1] = XdrvMailbox.payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_DOMOTICZ_COMMAND_INDEX_LVALUE, command, XdrvMailbox.index, Settings.domoticz_key_idx[XdrvMailbox.index -1]);
2017-01-28 13:41:01 +00:00
}
else if ((CMND_SWITCHIDX == command_code) && (XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_DOMOTICZ_IDX)) {
if (XdrvMailbox.payload >= 0) {
Settings.domoticz_switch_idx[XdrvMailbox.index -1] = XdrvMailbox.payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_DOMOTICZ_COMMAND_INDEX_NVALUE, command, XdrvMailbox.index, Settings.domoticz_switch_idx[XdrvMailbox.index -1]);
2017-01-28 13:41:01 +00:00
}
else if ((CMND_SENSORIDX == command_code) && (XdrvMailbox.index > 0) && (XdrvMailbox.index <= DZ_MAX_SENSORS)) {
if (XdrvMailbox.payload >= 0) {
Settings.domoticz_sensor_idx[XdrvMailbox.index -1] = XdrvMailbox.payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_DOMOTICZ_COMMAND_INDEX_NVALUE, command, XdrvMailbox.index, Settings.domoticz_sensor_idx[XdrvMailbox.index -1]);
2017-01-28 13:41:01 +00:00
}
else if (CMND_UPDATETIMER == command_code) {
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload < 3601)) {
Settings.domoticz_update_timer = XdrvMailbox.payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_DOMOTICZ "%s\":%d}"), command, Settings.domoticz_update_timer);
2017-01-28 13:41:01 +00:00
}
else serviced = false; // Unknown command
}
else serviced = false; // Unknown command
return serviced;
}
boolean DomoticzSendKey(byte key, byte device, byte state, byte svalflg)
2017-01-28 13:41:01 +00:00
{
boolean result = 0;
if (device <= MAX_DOMOTICZ_IDX) {
if ((Settings.domoticz_key_idx[device -1] || Settings.domoticz_switch_idx[device -1]) && (svalflg)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"command\":\"switchlight\",\"idx\":%d,\"switchcmd\":\"%s\"}"),
(key) ? Settings.domoticz_switch_idx[device -1] : Settings.domoticz_key_idx[device -1], (state) ? (2 == state) ? "Toggle" : "On" : "Off");
MqttPublish(domoticz_in_topic);
result = 1;
}
2017-01-28 13:41:01 +00:00
}
return result;
2017-01-28 13:41:01 +00:00
}
/*********************************************************************************************\
* Sensors
*
* Source : https://www.domoticz.com/wiki/Domoticz_API/JSON_URL%27s
* https://www.domoticz.com/wiki/MQTT
*
* Percentage, Barometric, Air Quality:
* {\"idx\":%d,\"nvalue\":%s}, Idx, Value
*
* Humidity:
* {\"idx\":%d,\"nvalue\":%s,\"svalue\":\"%s\"}, Idx, Humidity, HumidityStatus
*
* All other:
* {\"idx\":%d,\"nvalue\":0,\"svalue\":\"%s\"}, Idx, Value(s)
*
2017-01-28 13:41:01 +00:00
\*********************************************************************************************/
uint8_t DomoticzHumidityState(char *hum)
2017-01-28 13:41:01 +00:00
{
uint8_t h = atoi(hum);
return (!h) ? 0 : (h < 40) ? 2 : (h > 70) ? 3 : 1;
}
void DomoticzSensor(byte idx, char *data)
2017-01-28 13:41:01 +00:00
{
if (Settings.domoticz_sensor_idx[idx]) {
char dmess[90];
memcpy(dmess, mqtt_data, sizeof(dmess));
if (DZ_AIRQUALITY == idx) {
snprintf_P(mqtt_data, sizeof(dmess), PSTR("{\"idx\":%d,\"nvalue\":%s,\"Battery\":%d,\"RSSI\":%d}"),
Settings.domoticz_sensor_idx[idx], data, DomoticzBatteryQuality(), DomoticzRssiQuality());
} else {
snprintf_P(mqtt_data, sizeof(dmess), DOMOTICZ_MESSAGE,
Settings.domoticz_sensor_idx[idx], 0, data, DomoticzBatteryQuality(), DomoticzRssiQuality());
}
MqttPublish(domoticz_in_topic);
memcpy(mqtt_data, dmess, sizeof(dmess));
2017-01-28 13:41:01 +00:00
}
}
void DomoticzSensor(byte idx, uint32_t value)
{
char data[16];
snprintf_P(data, sizeof(data), PSTR("%d"), value);
DomoticzSensor(idx, data);
}
2017-01-28 13:41:01 +00:00
void DomoticzTempHumSensor(char *temp, char *hum)
2017-01-28 13:41:01 +00:00
{
char data[16];
snprintf_P(data, sizeof(data), PSTR("%s;%s;%d"), temp, hum, DomoticzHumidityState(hum));
DomoticzSensor(DZ_TEMP_HUM, data);
2017-01-28 13:41:01 +00:00
}
void DomoticzTempHumPressureSensor(char *temp, char *hum, char *baro)
2017-01-28 13:41:01 +00:00
{
char data[32];
snprintf_P(data, sizeof(data), PSTR("%s;%s;%d;%s;5"), temp, hum, DomoticzHumidityState(hum), baro);
DomoticzSensor(DZ_TEMP_HUM_BARO, data);
2017-01-28 13:41:01 +00:00
}
void DomoticzSensorPowerEnergy(int power, char *energy)
2017-01-28 13:41:01 +00:00
{
char data[16];
snprintf_P(data, sizeof(data), PSTR("%d;%s"), power, energy);
DomoticzSensor(DZ_POWER_ENERGY, data);
2017-01-28 13:41:01 +00:00
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
#ifdef USE_WEBSERVER
#define WEB_HANDLE_DOMOTICZ "dm"
const char S_CONFIGURE_DOMOTICZ[] PROGMEM = D_CONFIGURE_DOMOTICZ;
const char HTTP_BTN_MENU_DOMOTICZ[] PROGMEM =
"<br/><form action='" WEB_HANDLE_DOMOTICZ "' method='get'><button>" D_CONFIGURE_DOMOTICZ "</button></form>";
const char HTTP_FORM_DOMOTICZ[] PROGMEM =
"<fieldset><legend><b>&nbsp;" D_DOMOTICZ_PARAMETERS "&nbsp;</b></legend><form method='post' action='" WEB_HANDLE_DOMOTICZ "'>"
"<br/><table>";
const char HTTP_FORM_DOMOTICZ_RELAY[] PROGMEM =
"<tr><td style='width:260px'><b>" D_DOMOTICZ_IDX " {1</b></td><td style='width:70px'><input id='r{1' name='r{1' placeholder='0' value='{2'></td></tr>"
"<tr><td style='width:260px'><b>" D_DOMOTICZ_KEY_IDX " {1</b></td><td style='width:70px'><input id='k{1' name='k{1' placeholder='0' value='{3'></td></tr>";
const char HTTP_FORM_DOMOTICZ_SWITCH[] PROGMEM =
"<tr><td style='width:260px'><b>" D_DOMOTICZ_SWITCH_IDX " {1</b></td><td style='width:70px'><input id='s{1' name='s{1' placeholder='0' value='{4'></td></tr>";
const char HTTP_FORM_DOMOTICZ_SENSOR[] PROGMEM =
"<tr><td style='width:260px'><b>" D_DOMOTICZ_SENSOR_IDX " {1</b> {2</td><td style='width:70px'><input id='l{1' name='l{1' placeholder='0' value='{5'></td></tr>";
const char HTTP_FORM_DOMOTICZ_TIMER[] PROGMEM =
"<tr><td style='width:260px'><b>" D_DOMOTICZ_UPDATE_TIMER "</b> (" STR(DOMOTICZ_UPDATE_TIMER) ")</td><td style='width:70px'><input id='ut' name='ut' placeholder='" STR(DOMOTICZ_UPDATE_TIMER) "' value='{6'</td></tr>";
2018-11-14 13:32:09 +00:00
void HandleDomoticzConfiguration(void)
2017-01-28 13:41:01 +00:00
{
if (HttpUser()) { return; }
if (!WebAuthenticate()) { return WebServer->requestAuthentication(); }
AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_DOMOTICZ);
2017-01-28 13:41:01 +00:00
if (WebServer->hasArg("save")) {
DomoticzSaveSettings();
WebRestart(1);
return;
}
char stemp[32];
2017-01-28 13:41:01 +00:00
String page = FPSTR(HTTP_HEAD);
page.replace(F("{v}"), FPSTR(S_CONFIGURE_DOMOTICZ));
page += FPSTR(HTTP_HEAD_STYLE);
2017-01-28 13:41:01 +00:00
page += FPSTR(HTTP_FORM_DOMOTICZ);
for (int i = 0; i < MAX_DOMOTICZ_IDX; i++) {
if (i < devices_present) {
page += FPSTR(HTTP_FORM_DOMOTICZ_RELAY);
page.replace("{2", String((int)Settings.domoticz_relay_idx[i]));
page.replace("{3", String((int)Settings.domoticz_key_idx[i]));
}
if (pin[GPIO_SWT1 +i] < 99) {
page += FPSTR(HTTP_FORM_DOMOTICZ_SWITCH);
page.replace("{4", String((int)Settings.domoticz_switch_idx[i]));
}
2017-01-28 13:41:01 +00:00
page.replace("{1", String(i +1));
}
for (int i = 0; i < DZ_MAX_SENSORS; i++) {
page += FPSTR(HTTP_FORM_DOMOTICZ_SENSOR);
2017-01-28 13:41:01 +00:00
page.replace("{1", String(i +1));
page.replace("{2", GetTextIndexed(stemp, sizeof(stemp), i, kDomoticzSensors));
page.replace("{5", String((int)Settings.domoticz_sensor_idx[i]));
2017-01-28 13:41:01 +00:00
}
page += FPSTR(HTTP_FORM_DOMOTICZ_TIMER);
page.replace("{6", String((int)Settings.domoticz_update_timer));
2017-01-28 13:41:01 +00:00
page += F("</table>");
page += FPSTR(HTTP_FORM_END);
page += FPSTR(HTTP_BTN_CONF);
ShowPage(page);
2017-01-28 13:41:01 +00:00
}
2018-11-14 13:32:09 +00:00
void DomoticzSaveSettings(void)
2017-01-28 13:41:01 +00:00
{
char stemp[20];
char ssensor_indices[6 * MAX_DOMOTICZ_SNS_IDX];
char tmp[100];
2017-01-28 13:41:01 +00:00
for (byte i = 0; i < MAX_DOMOTICZ_IDX; i++) {
2017-01-28 13:41:01 +00:00
snprintf_P(stemp, sizeof(stemp), PSTR("r%d"), i +1);
WebGetArg(stemp, tmp, sizeof(tmp));
Settings.domoticz_relay_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp);
2017-01-28 13:41:01 +00:00
snprintf_P(stemp, sizeof(stemp), PSTR("k%d"), i +1);
WebGetArg(stemp, tmp, sizeof(tmp));
Settings.domoticz_key_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp);
2017-01-28 13:41:01 +00:00
snprintf_P(stemp, sizeof(stemp), PSTR("s%d"), i +1);
WebGetArg(stemp, tmp, sizeof(tmp));
Settings.domoticz_switch_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp);
2017-01-28 13:41:01 +00:00
}
ssensor_indices[0] = '\0';
for (byte i = 0; i < DZ_MAX_SENSORS; i++) {
2017-01-28 13:41:01 +00:00
snprintf_P(stemp, sizeof(stemp), PSTR("l%d"), i +1);
WebGetArg(stemp, tmp, sizeof(tmp));
Settings.domoticz_sensor_idx[i] = (!strlen(tmp)) ? 0 : atoi(tmp);
snprintf_P(ssensor_indices, sizeof(ssensor_indices), PSTR("%s%s%d"), ssensor_indices, (strlen(ssensor_indices)) ? "," : "", Settings.domoticz_sensor_idx[i]);
2017-01-28 13:41:01 +00:00
}
WebGetArg("ut", tmp, sizeof(tmp));
Settings.domoticz_update_timer = (!strlen(tmp)) ? DOMOTICZ_UPDATE_TIMER : atoi(tmp);
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_DOMOTICZ D_CMND_IDX " %d,%d,%d,%d, " D_CMND_KEYIDX " %d,%d,%d,%d, " D_CMND_SWITCHIDX " %d,%d,%d,%d, " D_CMND_SENSORIDX " %s, " D_CMND_UPDATETIMER " %d"),
Settings.domoticz_relay_idx[0], Settings.domoticz_relay_idx[1], Settings.domoticz_relay_idx[2], Settings.domoticz_relay_idx[3],
Settings.domoticz_key_idx[0], Settings.domoticz_key_idx[1], Settings.domoticz_key_idx[2], Settings.domoticz_key_idx[3],
Settings.domoticz_switch_idx[0], Settings.domoticz_switch_idx[1], Settings.domoticz_switch_idx[2], Settings.domoticz_switch_idx[3],
ssensor_indices, Settings.domoticz_update_timer);
AddLog(LOG_LEVEL_INFO);
2017-01-28 13:41:01 +00:00
}
#endif // USE_WEBSERVER
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
boolean Xdrv07(byte function)
{
boolean result = false;
if (Settings.flag.mqtt_enabled) {
switch (function) {
#ifdef USE_WEBSERVER
case FUNC_WEB_ADD_BUTTON:
strncat_P(mqtt_data, HTTP_BTN_MENU_DOMOTICZ, sizeof(mqtt_data));
break;
case FUNC_WEB_ADD_HANDLER:
WebServer->on("/" WEB_HANDLE_DOMOTICZ, HandleDomoticzConfiguration);
break;
#endif // USE_WEBSERVER
case FUNC_COMMAND:
result = DomoticzCommand();
break;
case FUNC_MQTT_SUBSCRIBE:
DomoticzMqttSubscribe();
break;
case FUNC_MQTT_INIT:
domoticz_update_timer = 2;
break;
case FUNC_MQTT_DATA:
result = DomoticzMqttData();
break;
case FUNC_EVERY_SECOND:
DomoticzMqttUpdate();
break;
case FUNC_SHOW_SENSOR:
// DomoticzSendSensor();
break;
}
}
return result;
}
2017-01-28 13:41:01 +00:00
#endif // USE_DOMOTICZ