diff --git a/README.md b/README.md index eca2ca7c2..7bb7723e6 100644 --- a/README.md +++ b/README.md @@ -1,7 +1,7 @@ ## Sonoff-Tasmota Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE. -Current version is **5.7.1** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information. +Current version is **5.7.1a** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/development/sonoff/_releasenotes.ino) for change information. ### ATTENTION All versions diff --git a/sonoff/_releasenotes.ino b/sonoff/_releasenotes.ino index 48ce58c55..623b3b09e 100644 --- a/sonoff/_releasenotes.ino +++ b/sonoff/_releasenotes.ino @@ -1,4 +1,11 @@ -/* 5.7.1 20170909 +/* 5.7.1a + * Fix Domoticz loop when Emulation is selected + * Add GPIO14 to Sonoff Dual (#797, #839) + * Add support for Witty Cloud (#794) + * Add support for Yunshan Wifi Relay (#802) + * Add GPIO16 input pulldown (#827) + * + * 5.7.1 20170909 * Remove leading spaces from MQTT data * Fix webconsole special character entry * Allow # as prefix for color value diff --git a/sonoff/sonoff.ino b/sonoff/sonoff.ino index 939655c85..082327308 100644 --- a/sonoff/sonoff.ino +++ b/sonoff/sonoff.ino @@ -25,7 +25,7 @@ - Select IDE Tools - Flash Size: "1M (no SPIFFS)" ====================================================*/ -#define VERSION 0x05070100 // 5.7.1 +#define VERSION 0x05070101 // 5.7.1a enum log_t {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL}; enum week_t {Last, First, Second, Third, Fourth}; @@ -2677,13 +2677,13 @@ void GPIO_init() Maxdevice++; } // if (pin[GPIO_KEY1 +i] < 99) { -// pinMode(pin[GPIO_KEY1 +i], INPUT_PULLUP); +// pinMode(pin[GPIO_KEY1 +i], (16 == pin[GPIO_KEY1 +i]) ? INPUT_PULLDOWN_16 : INPUT_PULLUP); // } } } for (byte i = 0; i < 4; i++) { if (pin[GPIO_KEY1 +i] < 99) { - pinMode(pin[GPIO_KEY1 +i], INPUT_PULLUP); + pinMode(pin[GPIO_KEY1 +i], (16 == pin[GPIO_KEY1 +i]) ? INPUT_PULLDOWN_16 : INPUT_PULLUP); } if (pin[GPIO_LED1 +i] < 99) { pinMode(pin[GPIO_LED1 +i], OUTPUT); @@ -2691,7 +2691,7 @@ void GPIO_init() } if (pin[GPIO_SWT1 +i] < 99) { swt_flg = 1; - pinMode(pin[GPIO_SWT1 +i], INPUT_PULLUP); + pinMode(pin[GPIO_SWT1 +i], (16 == pin[GPIO_SWT1 +i]) ? INPUT_PULLDOWN_16 :INPUT_PULLUP); lastwallswitch[i] = digitalRead(pin[GPIO_SWT1 +i]); // set global now so doesn't change the saved power state on first switch check } } diff --git a/sonoff/sonoff_template.h b/sonoff/sonoff_template.h index abb3a33f7..8b092b20d 100644 --- a/sonoff/sonoff_template.h +++ b/sonoff/sonoff_template.h @@ -157,6 +157,8 @@ enum module_t { SONOFF_T12, SONOFF_T13, SUPLA1, + WITTY, + YUNSHAN, MAXMODULE }; /********************************************************************************************/ @@ -199,11 +201,13 @@ const uint8_t nicelist[MAXMODULE] PROGMEM = { ELECTRODRAGON, EXS_RELAY, SUPLA1, + YUNSHAN, WION, H801, HUAFAN_SS, AILIGHT, - WEMOS + WEMOS, + WITTY }; // Default module settings @@ -278,7 +282,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, 0, 0, 0, 0, 0, // Flash connection 0, GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - 0, 0, 0, 0 + GPIO_USER, // GPIO14 Optional sensor + 0, 0, 0 }, { "Sonoff Pow", // Sonoff Pow (ESP8266) GPIO_KEY1, // GPIO00 Button @@ -619,6 +624,32 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, GPIO_LED1, // GPIO16 Led (1 = On, 0 = Off) GPIO_ADC0 // ADC0 A0 Analog input + }, + { "Witty Cloud", // Witty Cloud Dev Board (ESP8266) - https://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32643464555.html + GPIO_USER, // GPIO00 D3 flash push button on interface board + GPIO_USER, // GPIO01 Serial RXD and Optional sensor + GPIO_LED1_INV, // GPIO02 D4 Blue Led (0 = On, 1 = Off) on ESP-12F + GPIO_USER, // GPIO03 Serial TXD and Optional sensor + GPIO_KEY1, // GPIO04 D2 push button on ESP-12F board + GPIO_USER, // GPIO05 D1 optional sensor + 0, 0, 0, 0, 0, 0, // Flash connection + GPIO_PWM4, // GPIO12 D6 RGB LED Green + GPIO_PWM5, // GPIO13 D7 RGB LED Blue + GPIO_USER, // GPIO14 D5 optional sensor + GPIO_PWM3, // GPIO15 D8 RGB LED Red + GPIO_USER, // GPIO16 D0 optional sensor + GPIO_ADC0 // ADC0 A0 Light sensor / Requires USE_ADC_VCC in user_config.h to be disabled + }, + { "Yunshan Relay", // Yunshan Wifi Relay (ESP8266) - https://www.ebay.com/p/Esp8266-220v-10a-Network-Relay-WiFi-Module/1369583381 + // Schematics and Info https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/ + 0, // GPIO00 Flash jumper - Module Pin 8 + GPIO_USER, // GPIO01 Serial RXD and Optional sensor - Module Pin 2 + GPIO_LED1_INV, // GPIO02 Blue Led (0 = On, 1 = Off) on ESP-12F - Module Pin 7 + GPIO_USER, // GPIO03 Serial TXD and Optional sensor - Module Pin 3 + GPIO_REL1, // GPIO04 Red Led and Relay (0 = Off, 1 = On) - Module Pin 10 + GPIO_KEY1, // GPIO05 Blue Led and OptoCoupler input - Module Pin 9 + 0, 0, 0, 0, 0, 0, // Flash connection + 0, 0, 0, 0, 0 } }; diff --git a/sonoff/xdrv_snfled.ino b/sonoff/xdrv_snfled.ino index 90e5e1a77..cf4f25b46 100644 --- a/sonoff/xdrv_snfled.ino +++ b/sonoff/xdrv_snfled.ino @@ -269,7 +269,8 @@ void sl_prepPower(char *svalue, uint16_t ssvalue) do_cmnd_power(1, 6); // No publishPowerState } #ifdef USE_DOMOTICZ - mqtt_publishDomoticzPowerState(1); +// mqtt_publishDomoticzPowerState(1); + domoticz_updatePowerState(1); #endif // USE_DOMOTICZ if (sfl_flg > 1) { snprintf_P(svalue, ssvalue, PSTR("{\"" D_RSLT_POWER "\":\"%s\", \"" D_CMND_DIMMER "\":%d, \"" D_CMND_COLOR "\":\"%s\"}"), diff --git a/sonoff/xdrv_ws2812.ino b/sonoff/xdrv_ws2812.ino index 39d181186..d524d1015 100644 --- a/sonoff/xdrv_ws2812.ino +++ b/sonoff/xdrv_ws2812.ino @@ -546,7 +546,8 @@ boolean ws2812_command(char *type, uint16_t index, char *dataBuf, uint16_t data_ bitSet(power, ws_bit); #ifdef USE_DOMOTICZ // mqtt_publishDomoticzPowerState(index); - mqtt_publishDomoticzPowerState(ws_bit +1); +// mqtt_publishDomoticzPowerState(ws_bit +1); + domoticz_updatePowerState(ws_bit +1); #endif // USE_DOMOTICZ } snprintf_P(svalue, ssvalue, PSTR("{\"" D_CMND_DIMMER "\":%d}"), sysCfg.ws_dimmer);