diff --git a/sonoff/_releasenotes.ino b/sonoff/_releasenotes.ino index 63560c599..959c83d8d 100644 --- a/sonoff/_releasenotes.ino +++ b/sonoff/_releasenotes.ino @@ -1,4 +1,5 @@ /* 5.12.0e + * Add Domoticz dust (custom) sensors to PMS5003 and NovaFitness SDS drivers as PM1, PM2.5 and PM10 * Add a second TLS fingerprint to allow switching keys in TLS mode (#2033, #2102) * Add display of remaining pulse time to command PulseTime (#2085) * Add additional time offset to Wifi Retry based on device mac address (#2089) diff --git a/sonoff/language/cs-CZ.h b/sonoff/language/cs-CZ.h index c799d9a37..5f60ae8c1 100644 --- a/sonoff/language/cs-CZ.h +++ b/sonoff/language/cs-CZ.h @@ -1,5 +1,5 @@ /* - cz-CZ.h - localization for Czech with diacritics - Czech for Sonoff-Tasmota + cs-CZ.h - localization for Czech with diacritics - Czech for Sonoff-Tasmota Copyright (C) 2018 Theo Arends (translated by vs) @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Velikost dat" #define D_ANALOG_INPUT "Analogový vstup" -#define D_FINGERPRINT "Verifikuj otisk TLS..." -#define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do" -#define D_RETRY_IN "Zopakuji za" -#define D_VERIFIED "Ověřeno otisk " -#define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS" -#define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Zablokování smyčky" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Zapni úroveň 2 zápisu Weblog, pokud je očekávána odpověď" #define D_NEED_USER_AND_PASSWORD "Vyžadován uživatel=&heslo=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Verifikuj otisk TLS..." +#define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do" +#define D_RETRY_IN "Zopakuji za" +#define D_VERIFIED "Ověřeno otisk " +#define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS" +#define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast je vypnutý" #define D_MULTICAST_REJOINED "Multicast opět připojený" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Vlhk,Tlak" #define D_DOMOTICZ_POWER_ENERGY "Příkon,Energie" #define D_DOMOTICZ_ILLUMINANCE "Osvětlení" - #define D_DOMOTICZ_COUNT "Počítadlo" - #define D_DOMOTICZ_VOLTAGE "Napětí" - #define D_DOMOTICZ_CURRENT "Proud" + #define D_DOMOTICZ_COUNT "Počítadlo/PM1" + #define D_DOMOTICZ_VOLTAGE "Napětí/PM2,5" + #define D_DOMOTICZ_CURRENT "Proud/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_UPDATE_TIMER "Aktualizace stopek" diff --git a/sonoff/language/de-DE.h b/sonoff/language/de-DE.h index 14c525a75..4ba502af3 100644 --- a/sonoff/language/de-DE.h +++ b/sonoff/language/de-DE.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Datengröße" #define D_ANALOG_INPUT "Analog" -#define D_FINGERPRINT "TLS-Fingerabdruck wird verifiziert..." -#define D_TLS_CONNECT_FAILED_TO "TLS-Verbindung fehlgeschlagen an" -#define D_RETRY_IN "Wiederversuch in" -#define D_VERIFIED "verifiziert mit Fingerabdruck" -#define D_INSECURE "unsichere Verbindung aufgrund ungültigen Fingerabdrucks" -#define D_CONNECT_FAILED_TO "Verbindung fehlgeschlagen aufgrund von" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Aktivere Web Log Level 2 falls Reaktion erwartet" #define D_NEED_USER_AND_PASSWORD "Benutzer benötigt=&password=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "TLS-Fingerabdruck wird verifiziert..." +#define D_TLS_CONNECT_FAILED_TO "TLS-Verbindung fehlgeschlagen an" +#define D_RETRY_IN "Wiederversuch in" +#define D_VERIFIED "verifiziert mit Fingerabdruck" +#define D_INSECURE "unsichere Verbindung aufgrund ungültigen Fingerabdrucks" +#define D_CONNECT_FAILED_TO "Verbindung fehlgeschlagen aufgrund von" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast deaktiviert" #define D_MULTICAST_REJOINED "Multicast (wieder-)verbunden" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Power,Energy" #define D_DOMOTICZ_ILLUMINANCE "Illuminance" - #define D_DOMOTICZ_COUNT "Count" - #define D_DOMOTICZ_VOLTAGE "Voltage" - #define D_DOMOTICZ_CURRENT "Current" + #define D_DOMOTICZ_COUNT "Count/PM1" + #define D_DOMOTICZ_VOLTAGE "Voltage/PM2.5" + #define D_DOMOTICZ_CURRENT "Current/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_UPDATE_TIMER "Update timer" diff --git a/sonoff/language/en-GB.h b/sonoff/language/en-GB.h index 80c8518df..99faed325 100644 --- a/sonoff/language/en-GB.h +++ b/sonoff/language/en-GB.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Data Size" #define D_ANALOG_INPUT "Analog" -#define D_FINGERPRINT "Verify TLS fingerprint..." -#define D_TLS_CONNECT_FAILED_TO "TLS Connect failed to" -#define D_RETRY_IN "Retry in" -#define D_VERIFIED "Verified using Fingerprint" -#define D_INSECURE "Insecure connection due to invalid Fingerprint" -#define D_CONNECT_FAILED_TO "Connect failed to" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Enable weblog 2 if response expected" #define D_NEED_USER_AND_PASSWORD "Need user=&password=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Verify TLS fingerprint..." +#define D_TLS_CONNECT_FAILED_TO "TLS Connect failed to" +#define D_RETRY_IN "Retry in" +#define D_VERIFIED "Verified using Fingerprint" +#define D_INSECURE "Insecure connection due to invalid Fingerprint" +#define D_CONNECT_FAILED_TO "Connect failed to" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast disabled" #define D_MULTICAST_REJOINED "Multicast (re)joined" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Power,Energy" #define D_DOMOTICZ_ILLUMINANCE "Illuminance" - #define D_DOMOTICZ_COUNT "Count" - #define D_DOMOTICZ_VOLTAGE "Voltage" - #define D_DOMOTICZ_CURRENT "Current" + #define D_DOMOTICZ_COUNT "Count/PM1" + #define D_DOMOTICZ_VOLTAGE "Voltage/PM2.5" + #define D_DOMOTICZ_CURRENT "Current/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_UPDATE_TIMER "Update timer" diff --git a/sonoff/language/es-AR.h b/sonoff/language/es-AR.h index fee5c40ea..531f78d26 100644 --- a/sonoff/language/es-AR.h +++ b/sonoff/language/es-AR.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Tamaño de Datos" #define D_ANALOG_INPUT "Entrada Analógica" -#define D_FINGERPRINT "Verificar TLS fingerprint..." -#define D_TLS_CONNECT_FAILED_TO "Falló Conección TLS a" -#define D_RETRY_IN "Reintentando" -#define D_VERIFIED "Verificado Fingerprint" -#define D_INSECURE "Conección insegura por Fingerprint no válido" -#define D_CONNECT_FAILED_TO "Falló Conección a" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Ciclo Bloqueado" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Habilitar weblog 2 si desea respuesta" #define D_NEED_USER_AND_PASSWORD "Se necesita user=&password=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Verificar TLS fingerprint..." +#define D_TLS_CONNECT_FAILED_TO "Falló Conección TLS a" +#define D_RETRY_IN "Reintentando" +#define D_VERIFIED "Verificado Fingerprint" +#define D_INSECURE "Conección insegura por Fingerprint no válido" +#define D_CONNECT_FAILED_TO "Falló Conección a" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast deshabilitado" #define D_MULTICAST_REJOINED "Multicast (re)conectado" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Potencia,Energía" #define D_DOMOTICZ_ILLUMINANCE "Luminancia" - #define D_DOMOTICZ_COUNT "Contador" - #define D_DOMOTICZ_VOLTAGE "Voltaje" - #define D_DOMOTICZ_CURRENT "Corriente" + #define D_DOMOTICZ_COUNT "Contador/PM1" + #define D_DOMOTICZ_VOLTAGE "Voltaje/PM2,5" + #define D_DOMOTICZ_CURRENT "Corriente/PM10" #define D_DOMOTICZ_AIRQUALITY "Calidad del Aire" #define D_DOMOTICZ_UPDATE_TIMER "Intervalo de refresco" diff --git a/sonoff/language/fr-FR.h b/sonoff/language/fr-FR.h index 8ec6cd1f7..4690bab6e 100644 --- a/sonoff/language/fr-FR.h +++ b/sonoff/language/fr-FR.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Taille données" #define D_ANALOG_INPUT "Analogique" -#define D_FINGERPRINT "Verification empreinte TLS ..." -#define D_TLS_CONNECT_FAILED_TO "Echec de connexion TLS à" -#define D_RETRY_IN "Nouvelle tentative dans" -#define D_VERIFIED "Verifié empreinte " -#define D_INSECURE "Connexion non sécurisée car empreinte non vérifée" -#define D_CONNECT_FAILED_TO "Echec de connexion à" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Boucle bloquée" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Activer weblog 2 si response attendue" #define D_NEED_USER_AND_PASSWORD "Nécessite utilisateur=&password=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Verification empreinte TLS ..." +#define D_TLS_CONNECT_FAILED_TO "Echec de connexion TLS à" +#define D_RETRY_IN "Nouvelle tentative dans" +#define D_VERIFIED "Verifié empreinte " +#define D_INSECURE "Connexion non sécurisée car empreinte non vérifée" +#define D_CONNECT_FAILED_TO "Echec de connexion à" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast désactivé" #define D_MULTICAST_REJOINED "Multicast (re)joint" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Power,Energy" #define D_DOMOTICZ_ILLUMINANCE "Illuminance" - #define D_DOMOTICZ_COUNT "Count" - #define D_DOMOTICZ_VOLTAGE "Voltage" - #define D_DOMOTICZ_CURRENT "Current" + #define D_DOMOTICZ_COUNT "Count/PM1" + #define D_DOMOTICZ_VOLTAGE "Voltage/PM2,5" + #define D_DOMOTICZ_CURRENT "Current/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_UPDATE_TIMER "Update timer" diff --git a/sonoff/language/hu-HU.h b/sonoff/language/hu-HU.h index c07024f11..3d1714c38 100644 --- a/sonoff/language/hu-HU.h +++ b/sonoff/language/hu-HU.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Adat Méret" #define D_ANALOG_INPUT "Analóg" -#define D_FINGERPRINT "TLS fingerprint hitelesítése..." -#define D_TLS_CONNECT_FAILED_TO "TLS Csatlakozás sikertelen a" -#define D_RETRY_IN "Újrapróbálás" -#define D_VERIFIED "Hitelesítve Fingerprint" -#define D_INSECURE "Nem biztonságos kapcsolat érvénytelen Fingerprint miatt" -#define D_CONNECT_FAILED_TO "Sikertelen csatlakozás a" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Engedélyezz 2-es weblogolást több információért" #define D_NEED_USER_AND_PASSWORD "Kell felhasználó=&jelszó=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "TLS fingerprint hitelesítése..." +#define D_TLS_CONNECT_FAILED_TO "TLS Csatlakozás sikertelen a" +#define D_RETRY_IN "Újrapróbálás" +#define D_VERIFIED "Hitelesítve Fingerprint" +#define D_INSECURE "Nem biztonságos kapcsolat érvénytelen Fingerprint miatt" +#define D_CONNECT_FAILED_TO "Sikertelen csatlakozás a" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast kikapcsolva" #define D_MULTICAST_REJOINED "Multicast (újra)csatlakozás" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Hőm,Párat,Légny" #define D_DOMOTICZ_POWER_ENERGY "Teljesítmény,Energia" #define D_DOMOTICZ_ILLUMINANCE "Fényerő" - #define D_DOMOTICZ_COUNT "Szám" - #define D_DOMOTICZ_VOLTAGE "Feszültség" - #define D_DOMOTICZ_CURRENT "Áram" + #define D_DOMOTICZ_COUNT "Szám/PM1" + #define D_DOMOTICZ_VOLTAGE "Feszültség/PM2.5" + #define D_DOMOTICZ_CURRENT "Áram/PM10" #define D_DOMOTICZ_AIRQUALITY "Légminőség" #define D_DOMOTICZ_UPDATE_TIMER "Update időzítő" diff --git a/sonoff/language/it-IT.h b/sonoff/language/it-IT.h index 07499c821..67752fd81 100644 --- a/sonoff/language/it-IT.h +++ b/sonoff/language/it-IT.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Dimensione Dati" #define D_ANALOG_INPUT "Ingresso Analogico" -#define D_FINGERPRINT "Verifica TLS fingerprint..." -#define D_TLS_CONNECT_FAILED_TO "Connessione TLS fallita a" -#define D_RETRY_IN "Nuovo tentativo in" -#define D_VERIFIED "Verificato Fingerprint" -#define D_INSECURE "Connessione insicura a causa di Fingerprint non valido" -#define D_CONNECT_FAILED_TO "Connessione Fallita a" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Ciclo Bloccato" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Abilitare weblog 2 se e' attesa una risposta" #define D_NEED_USER_AND_PASSWORD "Richiesto user=&password=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Verifica TLS fingerprint..." +#define D_TLS_CONNECT_FAILED_TO "Connessione TLS fallita a" +#define D_RETRY_IN "Nuovo tentativo in" +#define D_VERIFIED "Verificato Fingerprint" +#define D_INSECURE "Connessione insicura a causa di Fingerprint non valido" +#define D_CONNECT_FAILED_TO "Connessione Fallita a" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast disabilitato" #define D_MULTICAST_REJOINED "Multicast (ri)associato" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Power,Energy" #define D_DOMOTICZ_ILLUMINANCE "Illuminance" - #define D_DOMOTICZ_COUNT "Count" - #define D_DOMOTICZ_VOLTAGE "Voltage" - #define D_DOMOTICZ_CURRENT "Current" + #define D_DOMOTICZ_COUNT "Count/PM1" + #define D_DOMOTICZ_VOLTAGE "Voltage/PM2.5" + #define D_DOMOTICZ_CURRENT "Current/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_UPDATE_TIMER "Intervallo di aggiornamento" diff --git a/sonoff/language/nl-NL.h b/sonoff/language/nl-NL.h index 918f9bddd..3a02ded56 100644 --- a/sonoff/language/nl-NL.h +++ b/sonoff/language/nl-NL.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Data lengte" #define D_ANALOG_INPUT "Analoog" -#define D_FINGERPRINT "Controleer TLS vingerafdruk..." -#define D_TLS_CONNECT_FAILED_TO "TLS Verbinding mislukt naar" -#define D_RETRY_IN "Opnieuw proberen over" -#define D_VERIFIED "Gecontroleerd met vingerafdruk" -#define D_INSECURE "Door ongeldige vingerafdruk een onveilige verbinding" -#define D_CONNECT_FAILED_TO "Verbinding mislukt naar" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Schakel weblog 2 in indien antwoord verwacht" #define D_NEED_USER_AND_PASSWORD "Benodig user=&password=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Controleer TLS vingerafdruk..." +#define D_TLS_CONNECT_FAILED_TO "TLS Verbinding mislukt naar" +#define D_RETRY_IN "Opnieuw proberen over" +#define D_VERIFIED "Gecontroleerd met vingerafdruk" +#define D_INSECURE "Door ongeldige vingerafdruk een onveilige verbinding" +#define D_CONNECT_FAILED_TO "Verbinding mislukt naar" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast uitgeschakeld" #define D_MULTICAST_REJOINED "Multicast verbonden" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Power,Energy" #define D_DOMOTICZ_ILLUMINANCE "Illuminance" - #define D_DOMOTICZ_COUNT "Count" - #define D_DOMOTICZ_VOLTAGE "Spanning" - #define D_DOMOTICZ_CURRENT "Stroom" + #define D_DOMOTICZ_COUNT "Count/PM1" + #define D_DOMOTICZ_VOLTAGE "Spanning/PM2,5" + #define D_DOMOTICZ_CURRENT "Stroom/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_UPDATE_TIMER "Bijwerk timer" diff --git a/sonoff/language/pl-PL.h b/sonoff/language/pl-PL.h index 4542d826d..6acc8a7f6 100644 --- a/sonoff/language/pl-PL.h +++ b/sonoff/language/pl-PL.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Wielkość danych" #define D_ANALOG_INPUT "Wej_analogowe" -#define D_FINGERPRINT "Weryfikuj odcisk TLS..." -#define D_TLS_CONNECT_FAILED_TO "Nieudane połączenie TLS do" -#define D_RETRY_IN "Spróbuj ponownie" -#define D_VERIFIED "Zweryfikowano odcisku" -#define D_INSECURE "Nieprawidłowe połączenie z powodu błędnego odcisku TLS" -#define D_CONNECT_FAILED_TO "Nie udało się nawiązać połączenia" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Pętla zablokowana" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Włącz poziom 2 zapisu Weblog, jeśli oczekiwana jest odpowiedź" #define D_NEED_USER_AND_PASSWORD "Wymagany użytkownik=&hasło=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Weryfikuj odcisk TLS..." +#define D_TLS_CONNECT_FAILED_TO "Nieudane połączenie TLS do" +#define D_RETRY_IN "Spróbuj ponownie" +#define D_VERIFIED "Zweryfikowano odcisku" +#define D_INSECURE "Nieprawidłowe połączenie z powodu błędnego odcisku TLS" +#define D_CONNECT_FAILED_TO "Nie udało się nawiązać połączenia" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast jest wyłączony" #define D_MULTICAST_REJOINED "Multicast (re)dołączony" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Wilg,Cis" #define D_DOMOTICZ_POWER_ENERGY "Moc,Energia" #define D_DOMOTICZ_ILLUMINANCE "Oświetl." - #define D_DOMOTICZ_COUNT "Licznik" - #define D_DOMOTICZ_VOLTAGE "Napięcie" - #define D_DOMOTICZ_CURRENT "Prąd" + #define D_DOMOTICZ_COUNT "Licznik/PM1" + #define D_DOMOTICZ_VOLTAGE "Napięcie/PM2,5" + #define D_DOMOTICZ_CURRENT "Prąd/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_UPDATE_TIMER "Zaktualizuj czasomierz" diff --git a/sonoff/language/pt-PT.h b/sonoff/language/pt-PT.h index db42667f5..180d316d7 100644 --- a/sonoff/language/pt-PT.h +++ b/sonoff/language/pt-PT.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Tamanho de dados" #define D_ANALOG_INPUT "Entrada Analógica" -#define D_FINGERPRINT "Verifique a impressão digital TLS..." -#define D_TLS_CONNECT_FAILED_TO "TLS não conseguiu ligar" -#define D_RETRY_IN "Tentativa em" -#define D_VERIFIED "Verificado impressão digital " -#define D_INSECURE "Ligação insegura devido à impressão digital inválida" -#define D_CONNECT_FAILED_TO "A ligação falhou ao" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Loop Bloqueado" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Habilitar weblog 2 se resposta esperada" #define D_NEED_USER_AND_PASSWORD "Necessário user=&password=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Verifique a impressão digital TLS..." +#define D_TLS_CONNECT_FAILED_TO "TLS não conseguiu ligar" +#define D_RETRY_IN "Tentativa em" +#define D_VERIFIED "Verificado impressão digital " +#define D_INSECURE "Ligação insegura devido à impressão digital inválida" +#define D_CONNECT_FAILED_TO "A ligação falhou ao" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast desabilitado" #define D_MULTICAST_REJOINED "Multicast (re)ingressou" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Potência,Energia" #define D_DOMOTICZ_ILLUMINANCE "Luminâcia" - #define D_DOMOTICZ_COUNT "Contagem" - #define D_DOMOTICZ_VOLTAGE "Voltagem" - #define D_DOMOTICZ_CURRENT "Corrente" + #define D_DOMOTICZ_COUNT "Contagem/PM1" + #define D_DOMOTICZ_VOLTAGE "Voltagem/PM2.5" + #define D_DOMOTICZ_CURRENT "Corrente/PM10" #define D_DOMOTICZ_AIRQUALITY "Qualidade do Ar" #define D_DOMOTICZ_UPDATE_TIMER "Tempo de atualização" diff --git a/sonoff/language/ru-RU.h b/sonoff/language/ru-RU.h index 1b60f0e4a..d2626ae5f 100644 --- a/sonoff/language/ru-RU.h +++ b/sonoff/language/ru-RU.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "Размер данных" #define D_ANALOG_INPUT "Аналоговый вход" -#define D_FINGERPRINT "Проверка TLS Fingerprint..." -#define D_TLS_CONNECT_FAILED_TO "Сбой подключения TLS к" -#define D_RETRY_IN "Повторить" -#define D_VERIFIED "Проверено Fingerprint" -#define D_INSECURE "Небезопасное соединение, недействительный Fingerprint" -#define D_CONNECT_FAILED_TO "Ошибка подключения к" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Блокирующий цикл" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "Включить Веб лог уровня 2 если ожидается ответ" #define D_NEED_USER_AND_PASSWORD "Ожидается user=&password=" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "Проверка TLS Fingerprint..." +#define D_TLS_CONNECT_FAILED_TO "Сбой подключения TLS к" +#define D_RETRY_IN "Повторить" +#define D_VERIFIED "Проверено Fingerprint" +#define D_INSECURE "Небезопасное соединение, недействительный Fingerprint" +#define D_CONNECT_FAILED_TO "Ошибка подключения к" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "Multicast отключен" #define D_MULTICAST_REJOINED "Multicast (ре)соединился" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro" #define D_DOMOTICZ_POWER_ENERGY "Power,Energy" #define D_DOMOTICZ_ILLUMINANCE "Illuminance" - #define D_DOMOTICZ_COUNT "Count" - #define D_DOMOTICZ_VOLTAGE "Voltage" - #define D_DOMOTICZ_CURRENT "Current" + #define D_DOMOTICZ_COUNT "Count/PM1" + #define D_DOMOTICZ_VOLTAGE "Voltage/PM2,5" + #define D_DOMOTICZ_CURRENT "Current/PM10" #define D_DOMOTICZ_AIRQUALITY "AirQuality" #define D_DOMOTICZ_UPDATE_TIMER "Update timer" @@ -384,7 +385,6 @@ #define D_PARTICALS_BEYOND "Particals" // sonoff_template.h -// Max string length is 8 characters including suffixes #define D_SENSOR_NONE "-нет-" #define D_SENSOR_DHT11 "DHT11" #define D_SENSOR_AM2301 "AM2301" diff --git a/sonoff/language/zh-CN.h b/sonoff/language/zh-CN.h index d52e648f9..eb0351508 100644 --- a/sonoff/language/zh-CN.h +++ b/sonoff/language/zh-CN.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "数据大小:" #define D_ANALOG_INPUT "Analog" -#define D_FINGERPRINT "验证 TLS 指纹..." -#define D_TLS_CONNECT_FAILED_TO "TLS 连接失败" -#define D_RETRY_IN "重试倒计时:" -#define D_VERIFIED "验证成功" -#define D_INSECURE "指纹无效导致连接不安全" -#define D_CONNECT_FAILED_TO "连接失败:" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "如果预期响应,则启用Weblog 2" #define D_NEED_USER_AND_PASSWORD "需要 user=<用户名>&password=<密码>" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "验证 TLS 指纹..." +#define D_TLS_CONNECT_FAILED_TO "TLS 连接失败" +#define D_RETRY_IN "重试倒计时:" +#define D_VERIFIED "验证成功" +#define D_INSECURE "指纹无效导致连接不安全" +#define D_CONNECT_FAILED_TO "连接失败:" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "组播已禁用" #define D_MULTICAST_REJOINED "组播已(重新)加入" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "温度,湿度,气压" #define D_DOMOTICZ_POWER_ENERGY "功率,电量" #define D_DOMOTICZ_ILLUMINANCE "照度" - #define D_DOMOTICZ_COUNT "数值" - #define D_DOMOTICZ_VOLTAGE "电压" - #define D_DOMOTICZ_CURRENT "电流" + #define D_DOMOTICZ_COUNT "数值/PM1" + #define D_DOMOTICZ_VOLTAGE "电压/PM2.5" + #define D_DOMOTICZ_CURRENT "电流/PM10" #define D_DOMOTICZ_AIRQUALITY "空气质量" #define D_DOMOTICZ_UPDATE_TIMER "更新计时器" diff --git a/sonoff/language/zh-TW.h b/sonoff/language/zh-TW.h index e011dfe3c..cab33a14b 100644 --- a/sonoff/language/zh-TW.h +++ b/sonoff/language/zh-TW.h @@ -165,13 +165,6 @@ #define D_DATA_SIZE "數據大小:" #define D_ANALOG_INPUT "Analog" -#define D_FINGERPRINT "驗證 TLS 指紋..." -#define D_TLS_CONNECT_FAILED_TO "TLS 連接失敗" -#define D_RETRY_IN "重試倒計時:" -#define D_VERIFIED "驗證成功" -#define D_INSECURE "指紋無效導致連接不安全" -#define D_CONNECT_FAILED_TO "連接失敗:" - // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" @@ -320,6 +313,14 @@ #define D_ENABLE_WEBLOG_FOR_RESPONSE "如果預期響應,則啟用Weblog 2" #define D_NEED_USER_AND_PASSWORD "需要 user=<用戶名>&password=<密碼>" +// xdrv_00_mqtt.ino +#define D_FINGERPRINT "驗證 TLS 指紋..." +#define D_TLS_CONNECT_FAILED_TO "TLS 連接失敗" +#define D_RETRY_IN "重試倒計時:" +#define D_VERIFIED "驗證成功" +#define D_INSECURE "指紋無效導致連接不安全" +#define D_CONNECT_FAILED_TO "連接失敗:" + // xdrv_wemohue.ino #define D_MULTICAST_DISABLED "組播已禁用" #define D_MULTICAST_REJOINED "組播已(重新)加入" @@ -351,9 +352,9 @@ #define D_DOMOTICZ_TEMP_HUM_BARO "溫度,濕度,氣壓" #define D_DOMOTICZ_POWER_ENERGY "功率,電量" #define D_DOMOTICZ_ILLUMINANCE "照度" - #define D_DOMOTICZ_COUNT "數值" - #define D_DOMOTICZ_VOLTAGE "電壓" - #define D_DOMOTICZ_CURRENT "電流" + #define D_DOMOTICZ_COUNT "數值/PM1" + #define D_DOMOTICZ_VOLTAGE "電壓/PM2.5" + #define D_DOMOTICZ_CURRENT "電流/PM10" #define D_DOMOTICZ_AIRQUALITY "空氣品質" #define D_DOMOTICZ_UPDATE_TIMER "更新計時器" diff --git a/sonoff/xsns_18_pms5003.ino b/sonoff/xsns_18_pms5003.ino index 217b63674..18b26263e 100644 --- a/sonoff/xsns_18_pms5003.ino +++ b/sonoff/xsns_18_pms5003.ino @@ -130,6 +130,11 @@ void PmsShow(boolean json) pms_data.pm10_standard, pms_data.pm25_standard, pms_data.pm100_standard, pms_data.pm10_env, pms_data.pm25_env, pms_data.pm100_env, pms_data.particles_03um, pms_data.particles_05um, pms_data.particles_10um, pms_data.particles_25um, pms_data.particles_50um, pms_data.particles_100um); +#ifdef USE_DOMOTICZ + DomoticzSensor(DZ_COUNT, pms_data.pm10_env); // PM1 + DomoticzSensor(DZ_VOLTAGE, pms_data.pm25_env); // PM2.5 + DomoticzSensor(DZ_CURRENT, pms_data.pm100_env); // PM10 +#endif // USE_DOMOTICZ #ifdef USE_WEBSERVER } else { snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_PMS5003_SNS, mqtt_data, diff --git a/sonoff/xsns_20_novasds.ino b/sonoff/xsns_20_novasds.ino index 56d896c5e..8f6b591da 100644 --- a/sonoff/xsns_20_novasds.ino +++ b/sonoff/xsns_20_novasds.ino @@ -107,6 +107,10 @@ void NovaSdsShow(boolean json) dtostrfd(pm2_5f, 1, pm2_5); if (json) { snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"SDS0X1\":{\"PM2.5\":%s,\"PM10\":%s}"), mqtt_data, pm2_5, pm10); +#ifdef USE_DOMOTICZ + DomoticzSensor(DZ_VOLTAGE, pm2_5); // PM2.5 + DomoticzSensor(DZ_CURRENT, pm10); // PM10 +#endif // USE_DOMOTICZ #ifdef USE_WEBSERVER } else { snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SDS0X1_SNS, mqtt_data, pm2_5, pm10);