diff --git a/README.md b/README.md index 687147307..651aa0b8d 100644 --- a/README.md +++ b/README.md @@ -1,7 +1,7 @@ ## Sonoff-Tasmota Provide ESP8266 based Sonoff by [iTead Studio](https://www.itead.cc/) and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE. -Current version is **4.0.4** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information. +Current version is **4.0.5** - See [sonoff/_releasenotes.ino](https://github.com/arendst/Sonoff-Tasmota/blob/master/sonoff/_releasenotes.ino) for change information. - This version provides all (Sonoff) modules in one file and starts up with Sonoff Basic. - Once uploaded select module using the configuration webpage or the commands ```Modules``` and ```Module```. diff --git a/api/arduino/sonoff.ino.bin b/api/arduino/sonoff.ino.bin index 7e79b3fb3..f948f2b64 100644 Binary files a/api/arduino/sonoff.ino.bin and b/api/arduino/sonoff.ino.bin differ diff --git a/sonoff/_releasenotes.ino b/sonoff/_releasenotes.ino index ff8d18dca..443877c55 100644 --- a/sonoff/_releasenotes.ino +++ b/sonoff/_releasenotes.ino @@ -1,4 +1,9 @@ -/* 4.0.4 20170312 +/* 4.0.5 20170314 + * Add command Status 11 to show power status with Vcc if define USE_ADC_VCC is enabled (default) + * Add ADC input to Sonoff SV and Wemos D1 mini - Needs recompile with define USE_ADC_VCC disabled (#137) + * Add MQTT host:port to timeout message (#199) + * + * 4.0.4 20170312 * Add pulse timers for up to 4 relays (#106) * Fix Sonoff Led power state when dimmer or color is 0 (#176) * Add command NtpServer to configure up to three NTP servers (#177) diff --git a/sonoff/settings.h b/sonoff/settings.h index c3562851f..0ce5c9dd4 100644 --- a/sonoff/settings.h +++ b/sonoff/settings.h @@ -201,3 +201,8 @@ struct RTCMEM { unsigned long hlw_kWhtoday; } rtcMem; +// See issue https://github.com/esp8266/Arduino/issues/2913 +#ifdef USE_ADC_VCC + ADC_MODE(ADC_VCC); // Set ADC input for Power Supply Voltage usage +#endif + diff --git a/sonoff/sonoff.ino b/sonoff/sonoff.ino index b869e07ef..e0744ac7c 100644 --- a/sonoff/sonoff.ino +++ b/sonoff/sonoff.ino @@ -12,9 +12,9 @@ //#define ALLOW_MIGRATE_TO_V3 #ifdef ALLOW_MIGRATE_TO_V3 - #define VERSION 0x03091B00 // 3.9.27 + #define VERSION 0x03091C00 // 3.9.28 #else - #define VERSION 0x04000400 // 4.0.4 + #define VERSION 0x04000500 // 4.0.5 #endif // ALLOW_MIGRATE_TO_V3 enum log_t {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE, LOG_LEVEL_ALL}; @@ -136,7 +136,7 @@ enum emul_t {EMUL_NONE, EMUL_WEMO, EMUL_HUE, EMUL_MAX}; #endif #define APP_BAUDRATE 115200 // Default serial baudrate -#define MAX_STATUS 10 // Max number of status lines +#define MAX_STATUS 11 // Max number of status lines enum butt_t {PRESSED, NOT_PRESSED}; @@ -584,8 +584,9 @@ void mqtt_reconnect() mqtt_publish(stopic, svalue, true); mqtt_connected(); } else { - snprintf_P(log, sizeof(log), PSTR("MQTT: CONNECT FAILED, rc %d. Retry in %d seconds"), mqttClient.state(), mqttcounter); - addLog(LOG_LEVEL_DEBUG, log); + snprintf_P(log, sizeof(log), PSTR("MQTT: Connect FAILED to %s:%d, rc %d. Retry in %d seconds"), + sysCfg.mqtt_host, sysCfg.mqtt_port, mqttClient.state(), mqttcounter); //status codes are documented here http://pubsubclient.knolleary.net/api.html#state + addLog(LOG_LEVEL_INFO, log); } } @@ -1473,12 +1474,47 @@ void publish_status(uint8_t payload) snprintf_P(svalue, sizeof(svalue), PSTR("%s}"), svalue); mqtt_publish_topic_P(option, PSTR("STATUS10"), svalue); } + + if ((payload == 0) || (payload == 11)) { + snprintf_P(svalue, sizeof(svalue), PSTR("{\"StatusPWR\":")); + state_mqttPresent(svalue, sizeof(svalue)); + snprintf_P(svalue, sizeof(svalue), PSTR("%s}"), svalue); + mqtt_publish_topic_P(option, PSTR("STATUS11"), svalue); + } + +} + +void state_mqttPresent(char* svalue, uint16_t ssvalue) +{ + char stemp1[8]; + + snprintf_P(svalue, ssvalue, PSTR("%s{\"Time\":\"%s\", \"Uptime\":%d"), svalue, getDateTime().c_str(), uptime); +#ifdef USE_ADC_VCC + dtostrf((double)ESP.getVcc()/1000, 1, 3, stemp1); + snprintf_P(svalue, ssvalue, PSTR("%s, \"Vcc\":%s"), svalue, stemp1); +#endif + for (byte i = 0; i < Maxdevice; i++) { + if (Maxdevice == 1) { // Legacy + snprintf_P(svalue, ssvalue, PSTR("%s, \"%s\":"), svalue, sysCfg.mqtt_subtopic); + } else { + snprintf_P(svalue, ssvalue, PSTR("%s, \"%s%d\":"), svalue, sysCfg.mqtt_subtopic, i +1); + } + snprintf_P(svalue, ssvalue, PSTR("%s\"%s\""), svalue, (power & (0x01 << i)) ? MQTT_STATUS_ON : MQTT_STATUS_OFF); + } + snprintf_P(svalue, ssvalue, PSTR("%s, \"Wifi\":{\"AP\":%d, \"SSID\":\"%s\", \"RSSI\":%d}}"), + svalue, sysCfg.sta_active +1, sysCfg.sta_ssid[sysCfg.sta_active], WIFI_getRSSIasQuality(WiFi.RSSI())); } void sensors_mqttPresent(char* svalue, uint16_t ssvalue, uint8_t* djson) { snprintf_P(svalue, ssvalue, PSTR("%s{\"Time\":\"%s\""), svalue, getDateTime().c_str()); - + +#ifndef USE_ADC_VCC + if (pin[GPIO_ADC0]) { + snprintf_P(svalue, ssvalue, PSTR("%s, \"AnalogInput0\":%d"), svalue, analogRead(A0)); + *djson = 1; + } +#endif if (pin[GPIO_DSB] < 99) { #ifdef USE_DS18B20 dsb_mqttPresent(svalue, ssvalue, djson); @@ -1584,17 +1620,8 @@ void every_second() if (tele_period >= sysCfg.tele_period) { tele_period = 0; - snprintf_P(svalue, sizeof(svalue), PSTR("{\"Time\":\"%s\", \"Uptime\":%d"), getDateTime().c_str(), uptime); - for (byte i = 0; i < Maxdevice; i++) { - if (Maxdevice == 1) { // Legacy - snprintf_P(svalue, sizeof(svalue), PSTR("%s, \"%s\":"), svalue, sysCfg.mqtt_subtopic); - } else { - snprintf_P(svalue, sizeof(svalue), PSTR("%s, \"%s%d\":"), svalue, sysCfg.mqtt_subtopic, i +1); - } - snprintf_P(svalue, sizeof(svalue), PSTR("%s\"%s\""), svalue, (power & (0x01 << i)) ? MQTT_STATUS_ON : MQTT_STATUS_OFF); - } - snprintf_P(svalue, sizeof(svalue), PSTR("%s, \"Wifi\":{\"AP\":%d, \"SSID\":\"%s\", \"RSSI\":%d}}"), - svalue, sysCfg.sta_active +1, sysCfg.sta_ssid[sysCfg.sta_active], WIFI_getRSSIasQuality(WiFi.RSSI())); + svalue[0] = '\0'; + state_mqttPresent(svalue, sizeof(svalue)); mqtt_publish_topic_P(1, PSTR("STATE"), svalue); uint8_t djson = 0; diff --git a/sonoff/sonoff_template.h b/sonoff/sonoff_template.h index 8064f47b2..6047d5563 100644 --- a/sonoff/sonoff_template.h +++ b/sonoff/sonoff_template.h @@ -88,6 +88,7 @@ enum fpins_t { GPIO_HLW_SEL, // HLW8012 Sel output (Sonoff Pow) GPIO_HLW_CF1, // HLW8012 CF1 voltage / current (Sonoff Pow) GPIO_HLW_CF, // HLW8012 CF power (Sonoff Pow) + GPIO_ADC0, // ADC GPIO_USER, // User configurable GPIO_MAX }; @@ -117,7 +118,7 @@ enum module_t { /********************************************************************************************/ -#define MAX_GPIO_PIN 17 // Number of supported GPIO +#define MAX_GPIO_PIN 18 // Number of supported GPIO typedef struct MYIO { uint8_t io[MAX_GPIO_PIN]; @@ -147,7 +148,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor 0, // GPIO15 - 0 // GPIO16 + 0, // GPIO16 + 0 // ADC or Vcc }, { "Sonoff RF", // Sonoff RF (ESP8266) GPIO_KEY1, // GPIO00 Button @@ -160,7 +162,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor - 0, 0 + 0, 0, + 0 // ADC or Vcc }, { "Sonoff SV", // Sonoff SV (ESP8266) GPIO_KEY1, // GPIO00 Button @@ -173,7 +176,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor - 0, 0 + 0, 0, + GPIO_ADC0 // ADC or Vcc }, { "Sonoff TH", // Sonoff TH10/16 (ESP8266) GPIO_KEY1, // GPIO00 Button @@ -186,7 +190,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor - 0, 0 + 0, 0, + 0 // ADC or Vcc }, { "Sonoff Dual", // Sonoff Dual (ESP8266) 0, @@ -198,7 +203,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, 0, 0, 0, 0, 0, // Flash connection 0, GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - 0, 0, 0 + 0, 0, 0, + 0 // ADC or Vcc }, { "Sonoff Pow", // Sonoff Pow (ESP8266) GPIO_KEY1, // GPIO00 Button @@ -209,7 +215,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_HLW_CF1, // GPIO13 HLW8012 CF1 voltage / current GPIO_HLW_CF, // GPIO14 HLW8012 CF power GPIO_LED1, // GPIO15 Green Led (0 = On, 1 = Off) - 0 + 0, + 0 // ADC or Vcc }, { "Sonoff 4CH", // Sonoff 4CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 @@ -226,7 +233,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) GPIO_KEY4, // GPIO14 Button 4 GPIO_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On) - 0 + 0, + 0 // ADC or Vcc }, { "S20 Socket", // S20 Smart Socket (ESP8266) GPIO_KEY1, // GPIO00 Button @@ -234,7 +242,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - 0, 0, 0 + 0, 0, 0, + 0 // ADC or Vcc }, { "Slampher", // Slampher (ESP8266) GPIO_KEY1, // GPIO00 Button @@ -242,7 +251,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - 0, 0, 0 + 0, 0, 0, + 0 // ADC or Vcc }, { "Sonoff Touch", // Sonoff Touch (ESP8285) GPIO_KEY1, // GPIO00 Button @@ -251,7 +261,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, 0, 0, GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - 0, 0, 0 + 0, 0, 0, + 0 // ADC or Vcc }, { "Sonoff LED", // Sonoff LED (ESP8266) GPIO_KEY1, // GPIO00 Button @@ -263,7 +274,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) GPIO_PWM1, // GPIO14 Warm light GPIO_USER, // GPIO15 Optional sensor (PWM4 Blue) - 0 + 0, + 0 // ADC or Vcc }, { "1 Channel", // 1 Channel Inching/Latching Relay using (PSA-B01 - ESP8266) GPIO_KEY1, // GPIO00 Button @@ -271,7 +283,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - 0, 0, 0 + 0, 0, 0, + 0 // ADC or Vcc }, { "4 Channel", // 4 Channel Inching/Latching Relays 0, @@ -282,7 +295,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, 0, 0, 0, 0, 0, // Flash connection 0, GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - 0, 0, 0 + 0, 0, 0, + 0 // ADC or Vcc }, { "Motor C/AC", // Motor Clockwise / Anti clockwise (PSA-B01 - ESP8266) GPIO_KEY1, // GPIO00 Button @@ -290,7 +304,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { 0, 0, 0, 0, 0, 0, // Flash connection GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - 0, 0, 0 + 0, 0, 0, + 0 // ADC or Vcc }, { "ElectroDragon", // ElectroDragon IoT Relay Board (ESP8266) GPIO_KEY2, // GPIO00 Button 2 @@ -304,7 +319,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_REL1, // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On) GPIO_USER, // GPIO14 Optional sensor GPIO_USER, // GPIO15 Optional sensor - GPIO_LED1 // GPIO16 Green/Blue Led (1 = On, 0 = Off) + GPIO_LED1, // GPIO16 Green/Blue Led (1 = On, 0 = Off) + 0 // ADC or Vcc }, { "EXS Relay", // Latching relay https://ex-store.de/ESP8266-WiFi-Relay-V31 (ESP8266) // Module Pin 1 VCC 3V3, Module Pin 6 GND @@ -319,7 +335,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_REL2, // GPIO13 Relay1 ( 1 = On) GPIO_USER, // GPIO14 Module Pin 5 0, - GPIO_USER // GPIO16 Module Pin 4 + GPIO_USER, // GPIO16 Module Pin 4 + 0 // ADC or Vcc }, { "WiOn", // Indoor Tap https://www.amazon.com/gp/product/B00ZYLUBJU/ref=s9_acsd_al_bw_c_x_3_w (ESP8266) GPIO_USER, // GPIO00 Optional sensor (pm clock) @@ -331,7 +348,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_KEY1, // GPIO13 Button 0, GPIO_REL1, // GPIO15 Relay (0 = Off, 1 = On) - 0 + 0, + 0 // ADC or Vcc }, { "WeMos D1 mini", // WeMos and NodeMCU hardware (ESP8266) GPIO_USER, // GPIO00 D3 Wemos Button Shield @@ -345,7 +363,8 @@ const mytmplt modules[MAXMODULE] PROGMEM = { GPIO_USER, // GPIO13 D7 GPIO_USER, // GPIO14 D5 GPIO_USER, // GPIO15 D8 - GPIO_USER // GPIO16 D0 Wemos Wake + GPIO_USER, // GPIO16 D0 Wemos Wake + GPIO_ADC0 // ADC or Vcc } }; diff --git a/sonoff/user_config.h b/sonoff/user_config.h index efc05b61d..1a5bc5de7 100644 --- a/sonoff/user_config.h +++ b/sonoff/user_config.h @@ -126,6 +126,8 @@ #define ENERGY_RESOLUTION 3 // Maximum number of decimals (0 - 5) showing energy usage in kWh // -- Sensor code selection ----------------------- +#define USE_ADC_VCC // Display Vcc in Power status. Disable for ADC input use on selected devices + //#define USE_DS18x20 // Optional using OneWire library for multiple DS18B20 and/or DS18S20 (+2k code) #define USE_I2C // I2C using library wire (+10k code, 0.2k mem) - Disable by //