From 26cc711cc8681fc1e54ce24f6239546f89b4fc25 Mon Sep 17 00:00:00 2001 From: bovirus <1262554+bovirus@users.noreply.github.com> Date: Mon, 12 Apr 2021 07:32:34 +0200 Subject: [PATCH] Update Italian language --- tasmota/language/it_IT.h | 216 +++++++++++++++++++-------------------- 1 file changed, 108 insertions(+), 108 deletions(-) diff --git a/tasmota/language/it_IT.h b/tasmota/language/it_IT.h index f15d873a7..c73ad3d5c 100644 --- a/tasmota/language/it_IT.h +++ b/tasmota/language/it_IT.h @@ -28,7 +28,7 @@ * Use online command StateText to translate ON, OFF, HOLD and TOGGLE. * Use online command Prefix to translate cmnd, stat and tele. * - * Updated until v9.3.1.2 - Last update 10.04.2021 + * Updated until v9.3.1.2 - Last update 11.04.2021 \*********************************************************************/ #define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English) @@ -648,9 +648,9 @@ #define D_SENSOR_TM1638_CLK "TM1638 - CLK" #define D_SENSOR_TM1638_DIO "TM1638 - DIO" #define D_SENSOR_TM1638_STB "TM1638 - STB" -#define D_SENSOR_MAX7219_DIN "MAX7219 - DIN" +#define D_SENSOR_MAX7219_DIN "MAX7219 - DIN" #define D_SENSOR_MAX7219_CS "MAX7219 - CS" -#define D_SENSOR_MAX7219_CLK "MAX7219 - CLK" +#define D_SENSOR_MAX7219_CLK "MAX7219 - CLK" #define D_SENSOR_HX711_SCK "HX711 - SCK" #define D_SENSOR_HX711_DAT "HX711 - DAT" #define D_SENSOR_FTC532 "FTC532" @@ -806,57 +806,57 @@ #define D_SENSOR_NEOPOOL_TX "NeoPool - TX" #define D_SENSOR_NEOPOOL_RX "NeoPool - RX" #define D_SENSOR_VL53L0X_XSHUT "VL53L0X XSHUT" -#define D_SENSOR_TFMINIPLUS_TX "TFmini+ - TX" -#define D_SENSOR_TFMINIPLUS_RX "TFmini+ - RX" +#define D_SENSOR_TFMINIPLUS_TX "TFmini+ - TX" +#define D_SENSOR_TFMINIPLUS_RX "TFmini+ - RX" #define D_SENSOR_ZEROCROSS "Impulsi ZC" #define D_SENSOR_HALLEFFECT "Effetto hall" #define D_SENSOR_EPD_DATA "EPD - Dati" // Units -#define D_UNIT_AMPERE "A" -#define D_UNIT_CELSIUS "C" -#define D_UNIT_CENTIMETER "cm" -#define D_UNIT_DEGREE "°" -#define D_UNIT_FAHRENHEIT "F" -#define D_UNIT_HERTZ "Hz" -#define D_UNIT_HOUR "o" -#define D_UNIT_GALLONS "gal" -#define D_UNIT_GALLONS_PER_MIN "g/m" -#define D_UNIT_INCREMENTS "inc" -#define D_UNIT_KELVIN "K" -#define D_UNIT_KILOMETER "km" -#define D_UNIT_KILOGRAM "kg" -#define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h" -#define D_UNIT_KILOOHM "kΩ" -#define D_UNIT_KILOWATTHOUR "kWh" -#define D_UNIT_LITERS "L" -#define D_UNIT_LITERS_PER_MIN "L/m" -#define D_UNIT_LUX "lx" +#define D_UNIT_AMPERE "A" +#define D_UNIT_CELSIUS "C" +#define D_UNIT_CENTIMETER "cm" +#define D_UNIT_DEGREE "°" +#define D_UNIT_FAHRENHEIT "F" +#define D_UNIT_HERTZ "Hz" +#define D_UNIT_HOUR "o" +#define D_UNIT_GALLONS "gal" +#define D_UNIT_GALLONS_PER_MIN "g/m" +#define D_UNIT_INCREMENTS "inc" +#define D_UNIT_KELVIN "K" +#define D_UNIT_KILOMETER "km" +#define D_UNIT_KILOGRAM "kg" +#define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h" +#define D_UNIT_KILOOHM "kΩ" +#define D_UNIT_KILOWATTHOUR "kWh" +#define D_UNIT_LITERS "L" +#define D_UNIT_LITERS_PER_MIN "L/m" +#define D_UNIT_LUX "lx" #define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg/m³" -#define D_UNIT_MICROMETER "µm" -#define D_UNIT_MICROSECOND "µs" -#define D_UNIT_MICROSIEMENS_PER_CM "µS/cm" -#define D_UNIT_MILLIAMPERE "mA" -#define D_UNIT_MILLILITERS "ml" -#define D_UNIT_MILLIMETER "mm" -#define D_UNIT_MILLIMETER_MERCURY "mmHg" -#define D_UNIT_MILLISECOND "ms" -#define D_UNIT_MILLIVOLT "mV" -#define D_UNIT_MINUTE "Min" -#define D_UNIT_PARTS_PER_BILLION "ppb" -#define D_UNIT_PARTS_PER_DECILITER "ppd" -#define D_UNIT_PARTS_PER_MILLION "ppm" -#define D_UNIT_MILIGRAMS_PER_LITER "mg/L" -#define D_UNIT_PERCENT "%%" -#define D_UNIT_PRESSURE "hPa" -#define D_UNIT_SECOND "sec" -#define D_UNIT_SECTORS "settori" -#define D_UNIT_VA "VA" -#define D_UNIT_VAR "VAr" -#define D_UNIT_VOLT "V" -#define D_UNIT_WATT "W" -#define D_UNIT_WATTHOUR "Wh" -#define D_UNIT_WATT_METER_QUADRAT "W/m²" +#define D_UNIT_MICROMETER "µm" +#define D_UNIT_MICROSECOND "µs" +#define D_UNIT_MICROSIEMENS_PER_CM "µS/cm" +#define D_UNIT_MILLIAMPERE "mA" +#define D_UNIT_MILLILITERS "ml" +#define D_UNIT_MILLIMETER "mm" +#define D_UNIT_MILLIMETER_MERCURY "mmHg" +#define D_UNIT_MILLISECOND "ms" +#define D_UNIT_MILLIVOLT "mV" +#define D_UNIT_MINUTE "Min" +#define D_UNIT_PARTS_PER_BILLION "ppb" +#define D_UNIT_PARTS_PER_DECILITER "ppd" +#define D_UNIT_PARTS_PER_MILLION "ppm" +#define D_UNIT_MILIGRAMS_PER_LITER "mg/L" +#define D_UNIT_PERCENT "%%" +#define D_UNIT_PRESSURE "hPa" +#define D_UNIT_SECOND "sec" +#define D_UNIT_SECTORS "settori" +#define D_UNIT_VA "VA" +#define D_UNIT_VAR "VAr" +#define D_UNIT_VOLT "V" +#define D_UNIT_WATT "W" +#define D_UNIT_WATTHOUR "Wh" +#define D_UNIT_WATT_METER_QUADRAT "W/m²" #define D_NEW_ADDRESS "Imposta indirizzo a" #define D_OUT_OF_RANGE "Fuori intervallo" @@ -916,38 +916,38 @@ #define D_MANAGE_FILE_SYSTEM "Gestione File system" #define D_FS_SIZE "Dimensione" #define D_FS_FREE "Liberi" -#define D_NEW_FILE "newfile.txt" -#define D_CREATE_NEW_FILE "Create and edit new file" -#define D_EDIT_FILE "Edit File" +#define D_NEW_FILE "nuovofile.txt" +#define D_CREATE_NEW_FILE "Crea e modifica nuovo file" +#define D_EDIT_FILE "Modifica file" //xsns_67_as3935.ino -#define D_AS3935_GAIN "guadagno:" -#define D_AS3935_ENERGY "energia:" -#define D_AS3935_DISTANCE "distanza:" +#define D_AS3935_GAIN "guadagno:" +#define D_AS3935_ENERGY "energia:" +#define D_AS3935_DISTANCE "distanza:" #define D_AS3935_DISTURBER "disturbatore:" -#define D_AS3935_VRMS "µVrms:" -#define D_AS3935_APRX "appross.:" -#define D_AS3935_AWAY "lontano" -#define D_AS3935_LIGHT "illuminazione" -#define D_AS3935_OUT "illuminazione fuori intervallo" -#define D_AS3935_NOT "distanza non determinata" -#define D_AS3935_ABOVE "illuminazione ambientale" -#define D_AS3935_NOISE "rilevato rumore" -#define D_AS3935_DISTDET "rilevato disturbatore" -#define D_AS3935_INTNOEV "Interrupt senza evento!" -#define D_AS3935_FLICKER "Flicker PIN IRQ!" -#define D_AS3935_POWEROFF "Spegnimento" -#define D_AS3935_NOMESS "in ascolto..." -#define D_AS3935_ON "ON" -#define D_AS3935_OFF "OFF" -#define D_AS3935_INDOORS "Interno" -#define D_AS3935_OUTDOORS "Esterno" -#define D_AS3935_CAL_FAIL "calibrazione fallita" -#define D_AS3935_CAL_OK "calibrazione impostata a:" +#define D_AS3935_VRMS "µVrms:" +#define D_AS3935_APRX "appross.:" +#define D_AS3935_AWAY "lontano" +#define D_AS3935_LIGHT "illuminazione" +#define D_AS3935_OUT "illuminazione fuori intervallo" +#define D_AS3935_NOT "distanza non determinata" +#define D_AS3935_ABOVE "illuminazione ambientale" +#define D_AS3935_NOISE "rilevato rumore" +#define D_AS3935_DISTDET "rilevato disturbatore" +#define D_AS3935_INTNOEV "Interrupt senza evento!" +#define D_AS3935_FLICKER "Flicker PIN IRQ!" +#define D_AS3935_POWEROFF "Spegnimento" +#define D_AS3935_NOMESS "in ascolto..." +#define D_AS3935_ON "ON" +#define D_AS3935_OFF "OFF" +#define D_AS3935_INDOORS "Interno" +#define D_AS3935_OUTDOORS "Esterno" +#define D_AS3935_CAL_FAIL "calibrazione fallita" +#define D_AS3935_CAL_OK "calibrazione impostata a:" //xsns_68_opentherm.ino -#define D_SENSOR_BOILER_OT_RX "OpenTherm - RX" -#define D_SENSOR_BOILER_OT_TX "OpenTherm - TX" +#define D_SENSOR_BOILER_OT_RX "OpenTherm - RX" +#define D_SENSOR_BOILER_OT_TX "OpenTherm - TX" // xnrg_15_teleinfo Denky (Teleinfo) #define D_CONTRACT "Contratto" @@ -959,41 +959,41 @@ #define D_MAX_CURRENT "Corrente max" // xsns_79_as608.ino -#define D_FP_ENROLL_PLACEFINGER "Appoggia impronta" -#define D_FP_ENROLL_REMOVEFINGER "Rimuovi impronta" -#define D_FP_ENROLL_PLACESAMEFINGER "Appoggia di nuovo stessa impronta" -#define D_FP_ENROLL_RETRY "Errore quindi riprova" -#define D_FP_ENROLL_RESTART "Riavvia" -#define D_FP_ENROLL_ERROR "Errore" -#define D_FP_ENROLL_RESET "Ripristina" -#define D_FP_ENROLL_ACTIVE "Attivo" -#define D_FP_ENROLL_INACTIVE "Non attivo" +#define D_FP_ENROLL_PLACEFINGER "Appoggia impronta" +#define D_FP_ENROLL_REMOVEFINGER "Rimuovi impronta" +#define D_FP_ENROLL_PLACESAMEFINGER "Appoggia di nuovo stessa impronta" +#define D_FP_ENROLL_RETRY "Errore quindi riprova" +#define D_FP_ENROLL_RESTART "Riavvia" +#define D_FP_ENROLL_ERROR "Errore" +#define D_FP_ENROLL_RESET "Ripristina" +#define D_FP_ENROLL_ACTIVE "Attivo" +#define D_FP_ENROLL_INACTIVE "Non attivo" // Indexed by Adafruit_Fingerprint.h defines -#define D_FP_PACKETRECIEVEERR "Errore comunicazione" // 0x01 Error when receiving data package -#define D_FP_NOFINGER "" // 0x02 No finger on the sensor -#define D_FP_IMAGEFAIL "Errore immagine" // 0x03 Failed to enroll the finger -#define D_FP_IMAGEMESS "Immmagine troppo danneggiata" // 0x06 Failed to generate character file due to overly disorderly fingerprint image -#define D_FP_FEATUREFAIL "Impronta troppo piccola" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image -#define D_FP_NOMATCH "Nessuna corrispondenza" // 0x08 Finger doesn't match -#define D_FP_NOTFOUND "Corrispondenza non trovata" // 0x09 Failed to find matching finger -#define D_FP_ENROLLMISMATCH "L'impronta non corrisponde" // 0x0A Failed to combine the character files -#define D_FP_BADLOCATION "Locazione errata" // 0x0B Addressed PageID is beyond the finger library -#define D_FP_DBRANGEFAIL "Errore intervallo DB" // 0x0C Error when reading template from library or invalid template -#define D_FP_UPLOADFEATUREFAIL "Errore funzione upload" // 0x0D Error when uploading template -#define D_FP_PACKETRESPONSEFAIL "Errore risposta pacchetto" // 0x0E Module failed to receive the following data packages -#define D_FP_UPLOADFAIL "Errore upload" // 0x0F Error when uploading image -#define D_FP_DELETEFAIL "Errore eliminazione" // 0x10 Failed to delete the template -#define D_FP_DBCLEARFAIL "Errore azzeramento DB" // 0x11 Failed to clear finger library -#define D_FP_PASSFAIL "Errore password" // 0x13 Find whether the fingerprint passed or failed -#define D_FP_INVALIDIMAGE "Immagine non valida" // 0x15 Failed to generate image because of lac of valid primary image -#define D_FP_FLASHERR "Errore scrittura flash" // 0x18 Error when writing flash -#define D_FP_INVALIDREG "Numero non valido" // 0x1A Invalid register number -#define D_FP_ADDRCODE "Codice indirizzo" // 0x20 Address code -#define D_FP_PASSVERIFY "Password verificata" // 0x21 Verify the fingerprint passed -#define D_FP_UNKNOWNERROR "Errore" // Any other error +#define D_FP_PACKETRECIEVEERR "Errore comunicazione" // 0x01 Error when receiving data package +#define D_FP_NOFINGER "" // 0x02 No finger on the sensor +#define D_FP_IMAGEFAIL "Errore immagine" // 0x03 Failed to enroll the finger +#define D_FP_IMAGEMESS "Immmagine troppo danneggiata" // 0x06 Failed to generate character file due to overly disorderly fingerprint image +#define D_FP_FEATUREFAIL "Impronta troppo piccola" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image +#define D_FP_NOMATCH "Nessuna corrispondenza" // 0x08 Finger doesn't match +#define D_FP_NOTFOUND "Corrispondenza non trovata" // 0x09 Failed to find matching finger +#define D_FP_ENROLLMISMATCH "L'impronta non corrisponde" // 0x0A Failed to combine the character files +#define D_FP_BADLOCATION "Locazione errata" // 0x0B Addressed PageID is beyond the finger library +#define D_FP_DBRANGEFAIL "Errore intervallo DB" // 0x0C Error when reading template from library or invalid template +#define D_FP_UPLOADFEATUREFAIL "Errore funzione upload" // 0x0D Error when uploading template +#define D_FP_PACKETRESPONSEFAIL "Errore risposta pacchetto" // 0x0E Module failed to receive the following data packages +#define D_FP_UPLOADFAIL "Errore upload" // 0x0F Error when uploading image +#define D_FP_DELETEFAIL "Errore eliminazione" // 0x10 Failed to delete the template +#define D_FP_DBCLEARFAIL "Errore azzeramento DB" // 0x11 Failed to clear finger library +#define D_FP_PASSFAIL "Errore password" // 0x13 Find whether the fingerprint passed or failed +#define D_FP_INVALIDIMAGE "Immagine non valida" // 0x15 Failed to generate image because of lac of valid primary image +#define D_FP_FLASHERR "Errore scrittura flash" // 0x18 Error when writing flash +#define D_FP_INVALIDREG "Numero non valido" // 0x1A Invalid register number +#define D_FP_ADDRCODE "Codice indirizzo" // 0x20 Address code +#define D_FP_PASSVERIFY "Password verificata" // 0x21 Verify the fingerprint passed +#define D_FP_UNKNOWNERROR "Errore" // Any other error // xsns_83_neopool.ino -#define D_NEOPOOL_MACH_NONE "NeoPool" // Machine names +#define D_NEOPOOL_MACH_NONE "NeoPool" // Machine names #define D_NEOPOOL_MACH_HIDROLIFE "Hidrolife (giallo)" #define D_NEOPOOL_MACH_AQUASCENIC "Aquascenic (blu)" #define D_NEOPOOL_MACH_OXILIFE "Oxilife (verde)" @@ -1040,7 +1040,7 @@ #define D_NEOPOOL_LOW "Bassa" #define D_NEOPOOL_FLOW1 "FL1" #define D_NEOPOOL_FLOW2 "FL2" -#define D_NEOPOOL_PH_HIGH "troppo alto" // ph Alarms +#define D_NEOPOOL_PH_HIGH "troppo alto" // ph Alarms #define D_NEOPOOL_PH_LOW "troppo basso" #define D_NEOPOOL_PUMP_TIME_EXCEEDED "tempo pompa superato"