diff --git a/I2CDEVICES.md b/I2CDEVICES.md
index 8e7ffea64..53167f88f 100644
--- a/I2CDEVICES.md
+++ b/I2CDEVICES.md
@@ -32,7 +32,7 @@ Index | Define              | Driver   | Device   | Address(es) | Bus2 | Descrip
   13  | USE_ADS1115         | xsns_12  | ADS1115  | 0x48 - 0x4B | Yes  | 4-channel 16-bit A/D converter
   14  | USE_INA219          | xsns_13  | INA219   | 0x40 - 0x41, 0x44 - 0x45 |      | Low voltage current sensor
   15  | USE_SHT3X           | xsns_14  | SHT3X    | 0x44 - 0x45 | Yes  | Temperature and Humidity sensor
-  15  | USE_SHT3X           | xsns_14  | SHT4X    | 0x44 - 0x45 | Yes  | Temperature and Humidity sensor
+  15  | USE_SHT3X           | xsns_14  | SHT4X    | 0x44 - 0x46 | Yes  | Temperature and Humidity sensor
   15  | USE_SHT3X           | xsns_14  | SHTCX    | 0x70        | Yes  | Temperature and Humidity sensor
   16  | USE_TSL2561         | xsns_16  | TSL2561  | 0x29, 0x39, 0x49 |      | Light intensity sensor
   17  | USE_MGS             | xsns_19  | Grove    | 0x04        |      | Multichannel gas sensor
diff --git a/tasmota/tasmota_xsns_sensor/xsns_14_sht3x.ino b/tasmota/tasmota_xsns_sensor/xsns_14_sht3x.ino
index daf1b5a1f..d2e4b72a4 100644
--- a/tasmota/tasmota_xsns_sensor/xsns_14_sht3x.ino
+++ b/tasmota/tasmota_xsns_sensor/xsns_14_sht3x.ino
@@ -1,7 +1,7 @@
 /*
   xsns_14_sht3x.ino - SHT3X, SHT4X and SHTCX temperature and humidity sensor support for Tasmota
 
-  Copyright (C) 2022  Theo Arends, Stefan Tibus
+  Copyright (C) 2024  Theo Arends, Stefan Tibus, Jan-David Förster
 
   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
@@ -25,19 +25,19 @@
  * This driver supports the following sensors:
  * - SHT3x series: SHT30, SHT31, SHT35 (addresses: A: 0x44, B: 0x45)
  * - SHTC series:  SHTC1, SHTC3 (address: 0x70)
- * - SHT4x series: SHT40, SHT41, SHT45 (addresses: A: 0x44, B: 0x45)
+ * - SHT4x series: SHT40, SHT41, SHT45 (addresses: A: 0x44, B: 0x45, C: 0x46)
 \*********************************************************************************************/
 
 #define XSNS_14             14
 #define XI2C_15             15         // See I2CDEVICES.md
 
 #define SHT3X_TYPES         3          // SHT3X, SHTCX and SHT4X
-#define SHT3X_ADDRESSES     3          // 0x44, 0x45 and 0x70
+#define SHT3X_ADDRESSES     4          // 0x44, 0x45, 0x46 and 0x70
 
 enum SHT3X_Types { SHT3X_TYPE_SHT3X, SHT3X_TYPE_SHTCX, SHT3X_TYPE_SHT4X };
 const char kSht3xTypes[] PROGMEM = "SHT3X|SHTC3|SHT4X";
 
-uint8_t sht3x_addresses[] = { 0x44, 0x45, 0x70 };
+uint8_t sht3x_addresses[] = { 0x44, 0x45, 0x46, 0x70 };
 
 uint8_t sht3x_count = 0;
 struct SHT3XSTRUCT {
@@ -121,9 +121,9 @@ void Sht3xDetect(void) {
 
   for (uint32_t bus = 0; bus < 2; bus++) {
     for (uint32_t k = 0; k < SHT3X_TYPES; k++) {
-      sht3x_sensors[sht3x_count].type = k;
       for (uint32_t i = 0; i < SHT3X_ADDRESSES; i++) {
         if (!I2cSetDevice(sht3x_addresses[i], bus)) { continue; }
+        sht3x_sensors[sht3x_count].type = k;
         sht3x_sensors[sht3x_count].address = sht3x_addresses[i];
         sht3x_sensors[sht3x_count].bus = bus;
         if (Sht3xRead(sht3x_count, t, h)) {
@@ -144,15 +144,25 @@ void Sht3xShow(bool json) {
   float h;
   char types[11];
 
-  for (uint32_t i = 0; i < sht3x_count; i++) {
-    if (Sht3xRead(i, t, h)) {
+  for (uint32_t idx = 0; idx < sht3x_count; idx++) {
+    if (Sht3xRead(idx, t, h)) {
       t = ConvertTemp(t);
       h = ConvertHumidity(h);
-      strlcpy(types, sht3x_sensors[i].types, sizeof(types));
+      strlcpy(types, sht3x_sensors[idx].types, sizeof(types));
       if (sht3x_count > 1) {
-        snprintf_P(types, sizeof(types), PSTR("%s%c%02X"), sht3x_sensors[i].types, IndexSeparator(), sht3x_sensors[i].address);  // "SHT3X-0xXX"
+        snprintf_P(types, sizeof(types), PSTR("%s%c%02X"), types, IndexSeparator(), sht3x_sensors[idx].address);  // "SHT3X-0xXX"  
+#ifdef ESP32
+        if (TasmotaGlobal.i2c_enabled_2) {
+          for (uint32_t i = 1; i < sht3x_count; i++) {
+            if (sht3x_sensors[0].bus != sht3x_sensors[i].bus) {
+              snprintf_P(types, sizeof(types), PSTR("%s%c%d"), types, IndexSeparator(), sht3x_sensors[idx].bus + 1); // "SHT3X-0xXX-X"  
+              break;
+            }
+          }
+        }
+#endif
       }
-      TempHumDewShow(json, ((0 == TasmotaGlobal.tele_period) && (0 == i)), types, t, h);
+      TempHumDewShow(json, ((0 == TasmotaGlobal.tele_period) && (0 == idx)), types, t, h);
     }
   }
 }