From 30a0e66589b7dd37949e51f02f7f328a2a3e9b8a Mon Sep 17 00:00:00 2001 From: gui Date: Tue, 14 Jul 2020 17:06:50 +0800 Subject: [PATCH] Optimizations for zh_TW translations --- tasmota/language/zh_TW.h | 450 +++++++++++++++++++-------------------- 1 file changed, 225 insertions(+), 225 deletions(-) diff --git a/tasmota/language/zh_TW.h b/tasmota/language/zh_TW.h index 4762b9c16..b6ab27b3e 100644 --- a/tasmota/language/zh_TW.h +++ b/tasmota/language/zh_TW.h @@ -53,69 +53,69 @@ // Common #define D_ADMIN "Admin" #define D_AIR_QUALITY "空氣品質" -#define D_AP "AP" // Access Point +#define D_AP "存取點" // Access Point #define D_AS "名稱:" #define D_AUTO "自動" -#define D_BATT "Batt" // Short for Battery +#define D_BATT "電池" // Short for Battery #define D_BLINK "閃爍" #define D_BLINKOFF "閃爍關" -#define D_BOOT_COUNT "啟動次數" +#define D_BOOT_COUNT "啟動計數" #define D_BRIGHTLIGHT "亮度" #define D_BSSID "BSSId" #define D_BUTTON "按鈕" -#define D_BY "by" // Written by me +#define D_BY "由" // Written by me #define D_BYTES "大小:" #define D_CELSIUS "攝氏" #define D_CHANNEL "Channel" #define D_CO2 "二氧化碳" #define D_CODE "代碼" // Button code -#define D_COLDLIGHT "冷" +#define D_COLDLIGHT "冷光" #define D_COMMAND "命令:" -#define D_CONNECTED "已連接" +#define D_CONNECTED "已連線" #define D_CORS_DOMAIN "CORS Domain" #define D_COUNT "數量:" #define D_COUNTER "Counter" #define D_CT_POWER "CT Power" #define D_CURRENT "電流" // As in Voltage and Current #define D_DATA "數據:" -#define D_DARKLIGHT "Dark" -#define D_DEBUG "除錯" +#define D_DARKLIGHT "暗光" +#define D_DEBUG "偵錯" #define D_DEWPOINT "Dew point" -#define D_DISABLED "停用" -#define D_DISTANCE "Distance" +#define D_DISABLED "已停用" +#define D_DISTANCE "距離" #define D_DNS_SERVER "DNS伺服器" #define D_DONE "完成" #define D_DST_TIME "DST" #define D_ECO2 "eCO₂" -#define D_EMULATION "設備模擬" -#define D_ENABLED "啟用" -#define D_ERASE "刪除" +#define D_EMULATION "模擬" +#define D_ENABLED "已啟用" +#define D_ERASE "抹除" #define D_ERROR "錯誤" #define D_FAHRENHEIT "華氏" -#define D_FAILED "失敗" +#define D_FAILED "失敗了" #define D_FALLBACK "Fallback" #define D_FALLBACK_TOPIC "Fallback Topic" #define D_FALSE "False" -#define D_FILE "文件:" +#define D_FILE "檔案:" #define D_FLOW_RATE "Flow rate" -#define D_FREE_MEMORY "可用記憶體" +#define D_FREE_MEMORY "可用的記憶體" #define D_PSR_MAX_MEMORY "PS-RAM Memory" #define D_PSR_FREE_MEMORY "PS-RAM free Memory" -#define D_FREQUENCY "Frequency" +#define D_FREQUENCY "頻率" #define D_GAS "氣體" -#define D_GATEWAY "網關" -#define D_GROUP "組:" +#define D_GATEWAY "閘道器" +#define D_GROUP "群組:" #define D_HOST "主機" -#define D_HOSTNAME "主機名" +#define D_HOSTNAME "主機名稱" #define D_HUMIDITY "濕度" #define D_ILLUMINANCE "照度" -#define D_IMMEDIATE "immediate" // Button immediate +#define D_IMMEDIATE "立即" // Button immediate #define D_INDEX "索引:" -#define D_INFO "信息" -#define D_INFRARED "Infrared" -#define D_INITIALIZED "初始化完成" -#define D_IP_ADDRESS "IP地址" -#define D_LIGHT "燈" +#define D_INFO "資訊" +#define D_INFRARED "紅外線" +#define D_INITIALIZED "已初始化" +#define D_IP_ADDRESS "IP位址" +#define D_LIGHT "燈光" #define D_LWT "LWT" #define D_LQI "LQI" // Zigbee Link Quality Index #define D_MODULE "模組" @@ -124,240 +124,240 @@ #define D_MULTI_PRESS "多次按鍵" #define D_NOISE "雜訊" #define D_NONE "無" -#define D_OFF "關" +#define D_OFF "關閉" #define D_OFFLINE "離線" #define D_OK "好" -#define D_ON "開" -#define D_ONLINE "在線" +#define D_ON "開啟" +#define D_ONLINE "線上" #define D_PASSWORD "密碼" -#define D_PORT "端口" +#define D_PORT "通訊埠" #define D_POWER_FACTOR "功率因數" -#define D_POWERUSAGE "功率" +#define D_POWERUSAGE "用電量" #define D_POWERUSAGE_ACTIVE "Active Power" #define D_POWERUSAGE_APPARENT "Apparent Power" #define D_POWERUSAGE_REACTIVE "Reactive Power" #define D_PRESSURE "氣壓" #define D_PRESSUREATSEALEVEL "海平面氣壓" -#define D_PROGRAM_FLASH_SIZE "韌體 Flash 大小" -#define D_PROGRAM_SIZE "韌體大小" +#define D_PROGRAM_FLASH_SIZE "程式記憶體大小" +#define D_PROGRAM_SIZE "程式大小" #define D_PROJECT "項目:" #define D_RAIN "Rain" #define D_RANGE "Range" #define D_RECEIVED "已接收" -#define D_RESTART "重啟" -#define D_RESTARTING "正在重啟" -#define D_RESTART_REASON "重啟原因" -#define D_RESTORE "恢覆" +#define D_RESTART "重新啟動" +#define D_RESTARTING "正在重新啟動" +#define D_RESTART_REASON "重新啟動的原因" +#define D_RESTORE "讀取設定" #define D_RETAINED "已保留" -#define D_RULE "Rule" -#define D_SAVE "存檔" -#define D_SENSOR "感測器" -#define D_SSID "名稱" -#define D_START "開始" -#define D_STD_TIME "STD" +#define D_RULE "規則" +#define D_SAVE "儲存" +#define D_SENSOR "感應器" +#define D_SSID "SSID" +#define D_START "啟動" +#define D_STD_TIME "標準時間" #define D_STOP "停止" -#define D_SUBNET_MASK "子網遮罩" +#define D_SUBNET_MASK "子網域遮罩" #define D_SUBSCRIBE_TO "訂閱" -#define D_UNSUBSCRIBE_FROM "退訂" -#define D_SUCCESSFUL "成功" -#define D_SUNRISE "Sunrise" -#define D_SUNSET "Sunset" +#define D_UNSUBSCRIBE_FROM "退出訂閱自" +#define D_SUCCESSFUL "已成功" +#define D_SUNRISE "日出" +#define D_SUNSET "日落" #define D_TEMPERATURE "溫度" #define D_TO "to" #define D_TOGGLE "切換" #define D_TOPIC "主題" -#define D_TOTAL_USAGE "Total Usage" +#define D_TOTAL_USAGE "總使用量" #define D_TRANSMIT "發送" #define D_TRUE "True" #define D_TVOC "TVOC" #define D_UPGRADE "升級" #define D_UPLOAD "上傳" -#define D_UPTIME "運行時間" -#define D_USER "用戶名" -#define D_UTC_TIME "UTC" -#define D_UV_INDEX "UV Index" -#define D_UV_INDEX_1 "Low" -#define D_UV_INDEX_2 "Mid" -#define D_UV_INDEX_3 "High" -#define D_UV_INDEX_4 "Danger" +#define D_UPTIME "啟動時間" +#define D_USER "使用者名稱" +#define D_UTC_TIME "世界協調時間(UTC)" +#define D_UV_INDEX "紫外線指數" +#define D_UV_INDEX_1 "低" +#define D_UV_INDEX_2 "中" +#define D_UV_INDEX_3 "高" +#define D_UV_INDEX_4 "危險" #define D_UV_INDEX_5 "BurnL1/2" #define D_UV_INDEX_6 "BurnL3" -#define D_UV_INDEX_7 "OoR" +#define D_UV_INDEX_7 "超出範圍" #define D_UV_LEVEL "紫外線等級" -#define D_UV_POWER "UV Power" +#define D_UV_POWER "紫外線能量" #define D_VERSION "版本" #define D_VOLTAGE "電壓" -#define D_WEIGHT "Weight" -#define D_WARMLIGHT "暖" -#define D_WEB_SERVER "Web Server" +#define D_WEIGHT "重量" +#define D_WARMLIGHT "暖光" +#define D_WEB_SERVER "網頁伺服器" // tasmota.ino -#define D_WARNING_MINIMAL_VERSION "警告：精簡產品不支持配置寫入保存" -#define D_LEVEL_10 "level 1-0" -#define D_LEVEL_01 "level 0-1" -#define D_SERIAL_LOGGING_DISABLED "串口日誌已禁用" -#define D_SYSLOG_LOGGING_REENABLED "Syslog 日誌已開啟" +#define D_WARNING_MINIMAL_VERSION "警告，這個版本並不支援將設定永久的儲存!" +#define D_LEVEL_10 "等級 1-0" +#define D_LEVEL_01 "等其 0-1" +#define D_SERIAL_LOGGING_DISABLED "已停用序列埠日誌" +#define D_SYSLOG_LOGGING_REENABLED "系統日誌已經重新啟用" -#define D_SET_BAUDRATE_TO "設置波特率為:" +#define D_SET_BAUDRATE_TO "將鮑率設定為:" #define D_RECEIVED_TOPIC "接收到的主題:" -#define D_DATA_SIZE "數據大小:" -#define D_ANALOG_INPUT "Analog" +#define D_DATA_SIZE "資料大小:" +#define D_ANALOG_INPUT "類比" // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blocked Loop" #define D_WPS_FAILED_WITH_STATUS "WPSconfig FAILED with status" #define D_ACTIVE_FOR_3_MINUTES "active for 3 minutes" -#define D_FAILED_TO_START "未能啟動" +#define D_FAILED_TO_START "無法啟動" #define D_PATCH_ISSUE_2186 "Patch issue 2186" -#define D_CONNECTING_TO_AP "連接到 AP" -#define D_IN_MODE "模式:" -#define D_CONNECT_FAILED_NO_IP_ADDRESS "連接失敗，因為沒有獲取到IP地址" -#define D_CONNECT_FAILED_AP_NOT_REACHED "連接失敗，無法連接AP" -#define D_CONNECT_FAILED_WRONG_PASSWORD "連接失敗" -#define D_CONNECT_FAILED_AP_TIMEOUT "連接失敗，AP超時" -#define D_ATTEMPTING_CONNECTION "嘗試連接..." -#define D_CHECKING_CONNECTION "檢查連接..." -#define D_QUERY_DONE "查詢完成。 發現MQTT服務" -#define D_MQTT_SERVICE_FOUND "發現MQTT服務:" -#define D_FOUND_AT "found at" -#define D_SYSLOG_HOST_NOT_FOUND "Syslog主機未找到" +#define D_CONNECTING_TO_AP "正在連線至存取點" +#define D_IN_MODE "in模式:" +#define D_CONNECT_FAILED_NO_IP_ADDRESS "連線失敗:未收到IP位置" +#define D_CONNECT_FAILED_AP_NOT_REACHED "連線失敗:無法連線至存取點" +#define D_CONNECT_FAILED_WRONG_PASSWORD "連線失敗" +#define D_CONNECT_FAILED_AP_TIMEOUT "連線失敗:存取點超時" +#define D_ATTEMPTING_CONNECTION "正在試圖連線中..." +#define D_CHECKING_CONNECTION "正在檢查連線中..." +#define D_QUERY_DONE "已完成查詢，找到MQTT服務了" +#define D_MQTT_SERVICE_FOUND "MQTT服務位於:" +#define D_FOUND_AT "位於" +#define D_SYSLOG_HOST_NOT_FOUND "找不到系統日誌主機" // settings.ino -#define D_SAVED_TO_FLASH_AT "保存到 flash:" -#define D_LOADED_FROM_FLASH_AT "從 flash 載入" -#define D_USE_DEFAULTS "使用默認設置" -#define D_ERASED_SECTOR "擦除刪除" +#define D_SAVED_TO_FLASH_AT "儲存至快閃記憶體，位於:" +#define D_LOADED_FROM_FLASH_AT "已從快閃記憶體中讀取，位於:" +#define D_USE_DEFAULTS "使用預設值" +#define D_ERASED_SECTOR "抹除磁區" // xdrv_02_webserver.ino -#define D_NOSCRIPT "To use Tasmota, please enable JavaScript" -#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "固件版本過低
請升級" -#define D_WEBSERVER_ACTIVE_ON "Web服務器:" -#define D_WITH_IP_ADDRESS "IP地址:" -#define D_WEBSERVER_STOPPED "Web 服務器已停止" -#define D_FILE_NOT_FOUND "文件未找到" -#define D_REDIRECTED "重定向到認證頁面" +#define D_NOSCRIPT "為了使用 Tasmota，請啟用 JavaScript" +#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL韌體
請升級" +#define D_WEBSERVER_ACTIVE_ON "網頁伺服器已經啟動，位於:" +#define D_WITH_IP_ADDRESS "IP位址:" +#define D_WEBSERVER_STOPPED "網頁伺服器已經停止" +#define D_FILE_NOT_FOUND "照不到檔案" +#define D_REDIRECTED "已重新定向至閘道認證頁面" #define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager set AccessPoint and keep Station" -#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager 設置接入點" -#define D_TRYING_TO_CONNECT "嘗試將設備連接到網絡" +#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager 已設定存取點" +#define D_TRYING_TO_CONNECT "正在將裝置連線至網路" -#define D_RESTART_IN "重啟需要" -#define D_SECONDS "秒" -#define D_DEVICE_WILL_RESTART "設備將在幾分鐘內重啟" -#define D_BUTTON_TOGGLE "狀態切換" -#define D_CONFIGURATION "設置" -#define D_INFORMATION "信息" -#define D_FIRMWARE_UPGRADE "固件升級" +#define D_RESTART_IN "重新啟動倒數 " +#define D_SECONDS " 秒" +#define D_DEVICE_WILL_RESTART "裝置將會在幾秒內重新啟動" +#define D_BUTTON_TOGGLE "切換" +#define D_CONFIGURATION "設定" +#define D_INFORMATION "資訊" +#define D_FIRMWARE_UPGRADE "韌體升級" #define D_CONSOLE "控制台" -#define D_CONFIRM_RESTART "確認重啟" +#define D_CONFIRM_RESTART "確認重新啟動" -#define D_CONFIGURE_MODULE "模塊設置" -#define D_CONFIGURE_WIFI "WiFi設置" -#define D_CONFIGURE_MQTT "MQTT設置" -#define D_CONFIGURE_DOMOTICZ "Domoticz設置" -#define D_CONFIGURE_LOGGING "日志設置" -#define D_CONFIGURE_OTHER "其他設置" -#define D_CONFIRM_RESET_CONFIGURATION "確認重置配置" -#define D_RESET_CONFIGURATION "重置配置" -#define D_BACKUP_CONFIGURATION "備份配置" -#define D_RESTORE_CONFIGURATION "還原配置" -#define D_MAIN_MENU "主菜單" +#define D_CONFIGURE_MODULE "模組設定" +#define D_CONFIGURE_WIFI "WiF設定i" +#define D_CONFIGURE_MQTT "MQTT設定" +#define D_CONFIGURE_DOMOTICZ "Domoticz設定" +#define D_CONFIGURE_LOGGING "日誌設定" +#define D_CONFIGURE_OTHER "其他設定" +#define D_CONFIRM_RESET_CONFIGURATION "確定重設設定" +#define D_RESET_CONFIGURATION "重設設定" +#define D_BACKUP_CONFIGURATION "備份設定" +#define D_RESTORE_CONFIGURATION "回復設定" +#define D_MAIN_MENU "主選單" -#define D_MODULE_PARAMETERS "模塊設置" -#define D_MODULE_TYPE "模塊類型" -#define D_PULLUP_ENABLE "No Button/Switch pull-up" -#define D_ADC "ADC" +#define D_MODULE_PARAMETERS "模組參數" +#define D_MODULE_TYPE "模組類型" +#define D_PULLUP_ENABLE "無按鈕/上拉式開關(Switch pull-up)" +#define D_ADC "類比轉換數位(ADC)" #define D_GPIO "GPIO" -#define D_SERIAL_IN "串口輸入(RX)" -#define D_SERIAL_OUT "串口輸出(TX)" +#define D_SERIAL_IN "序列埠輸入(RX)" +#define D_SERIAL_OUT "序列埠輸出(TX)" -#define D_WIFI_PARAMETERS "Wifi設置" +#define D_WIFI_PARAMETERS "Wifi設定" #define D_SCAN_FOR_WIFI_NETWORKS "掃描無線網絡" #define D_SCAN_DONE "掃描完畢" -#define D_NO_NETWORKS_FOUND "未找到任何網絡" -#define D_REFRESH_TO_SCAN_AGAIN "刷新並重試" -#define D_DUPLICATE_ACCESSPOINT "重覆AP" -#define D_SKIPPING_LOW_QUALITY "忽略弱信號網絡" +#define D_NO_NETWORKS_FOUND "找不到任何網絡" +#define D_REFRESH_TO_SCAN_AGAIN "重新整理以重新掃描" +#define D_DUPLICATE_ACCESSPOINT "重覆的存取點" +#define D_SKIPPING_LOW_QUALITY "正在忽略訊號品質不佳的訊號" #define D_RSSI "RSSI" #define D_WEP "WEP" #define D_WPA_PSK "WPA PSK" #define D_WPA2_PSK "WPA2 PSK" -#define D_AP1_SSID "AP1 名稱" +#define D_AP1_SSID "AP1 SSID" #define D_AP1_PASSWORD "AP1 密碼" -#define D_AP2_SSID "AP2 名稱" +#define D_AP2_SSID "AP2 SSID" #define D_AP2_PASSWORD "AP2 密碼" -#define D_MQTT_PARAMETERS "MQTT設置" +#define D_MQTT_PARAMETERS "MQTT設定" #define D_CLIENT "客戶端" #define D_FULL_TOPIC "完整主題" -#define D_LOGGING_PARAMETERS "日志設置" -#define D_SERIAL_LOG_LEVEL "串口日志級別" -#define D_MQTT_LOG_LEVEL "Mqtt log level" -#define D_WEB_LOG_LEVEL "Web 日志級別" -#define D_SYS_LOG_LEVEL "Syslog 日志級別" -#define D_MORE_DEBUG "全部調試" -#define D_SYSLOG_HOST "Syslog 主機地址" -#define D_SYSLOG_PORT "Syslog 端口" -#define D_TELEMETRY_PERIOD "上報周期" +#define D_LOGGING_PARAMETERS "日誌參數" +#define D_SERIAL_LOG_LEVEL "序列埠日誌等級" +#define D_MQTT_LOG_LEVEL "Mqtt 日誌等級" +#define D_WEB_LOG_LEVEL "Web 日誌等級" +#define D_SYS_LOG_LEVEL "Syslog 日誌等級" +#define D_MORE_DEBUG "More debug" +#define D_SYSLOG_HOST "Syslog 主機位址" +#define D_SYSLOG_PORT "Syslog 通訊埠" +#define D_TELEMETRY_PERIOD "Telemetry period" -#define D_OTHER_PARAMETERS "其他設置" -#define D_TEMPLATE "Template" -#define D_ACTIVATE "Activate" -#define D_DEVICE_NAME "Device Name" -#define D_WEB_ADMIN_PASSWORD "WEB管理密碼" -#define D_MQTT_ENABLE "啟用MQTT" -#define D_FRIENDLY_NAME "昵稱" +#define D_OTHER_PARAMETERS "其他參數" +#define D_TEMPLATE "模板" +#define D_ACTIVATE "啟動" +#define D_DEVICE_NAME "裝置名稱" +#define D_WEB_ADMIN_PASSWORD "網頁上的管理員密碼" +#define D_MQTT_ENABLE "MQTT的啟用" +#define D_FRIENDLY_NAME "暱稱" #define D_BELKIN_WEMO "貝爾金 WeMo" -#define D_HUE_BRIDGE "飛利浦 Hue 網橋" -#define D_SINGLE_DEVICE "單設備" -#define D_MULTI_DEVICE "多設備" +#define D_HUE_BRIDGE "Hue 橋接器" +#define D_SINGLE_DEVICE "單個裝置" +#define D_MULTI_DEVICE "多重裝置" -#define D_CONFIGURE_TEMPLATE "Configure Template" -#define D_TEMPLATE_PARAMETERS "Template parameters" +#define D_CONFIGURE_TEMPLATE "模板設定" +#define D_TEMPLATE_PARAMETERS "模板參數" #define D_TEMPLATE_NAME "Name" #define D_BASE_TYPE "Based on" #define D_TEMPLATE_FLAGS "Options" -#define D_SAVE_CONFIGURATION "保存設置" -#define D_CONFIGURATION_SAVED "設置已保存" -#define D_CONFIGURATION_RESET "設置已重置" +#define D_SAVE_CONFIGURATION "儲存設定" +#define D_CONFIGURATION_SAVED "設定已儲存" +#define D_CONFIGURATION_RESET "設定已重設" -#define D_PROGRAM_VERSION "固件版本" -#define D_BUILD_DATE_AND_TIME "編譯時間" -#define D_CORE_AND_SDK_VERSION "內核版本" -#define D_FLASH_WRITE_COUNT "刷機次數" -#define D_MAC_ADDRESS "MAC地址" +#define D_PROGRAM_VERSION "軟體版本" +#define D_BUILD_DATE_AND_TIME "編譯日期與時間" +#define D_CORE_AND_SDK_VERSION "核心與SDK版本" +#define D_FLASH_WRITE_COUNT "快閃記憶體寫入計數" +#define D_MAC_ADDRESS "MAC位址" #define D_MQTT_HOST "MQTT主機" -#define D_MQTT_PORT "MQTT端口" +#define D_MQTT_PORT "MQTT通訊埠" #define D_MQTT_CLIENT "MQTT客戶端" -#define D_MQTT_USER "MQTT用戶名" +#define D_MQTT_USER "MQTT使用者名稱" #define D_MQTT_TOPIC "MQTT 主題(Topic)" -#define D_MQTT_GROUP_TOPIC "MQTT 主題組(Group Topic)" -#define D_MQTT_FULL_TOPIC "MQTT 完整主題(Full Topic)" -#define D_MDNS_DISCOVERY "mDNS 發現" +#define D_MQTT_GROUP_TOPIC "MQTT 群組主題" +#define D_MQTT_FULL_TOPIC "MQTT 完整主題" +#define D_MDNS_DISCOVERY "mDNS 探索" #define D_MDNS_ADVERTISE "mDNS 廣播" -#define D_ESP_CHIP_ID "ESP芯片ID" -#define D_FLASH_CHIP_ID "Flash芯片ID" -#define D_FLASH_CHIP_SIZE "Flash大小" -#define D_FREE_PROGRAM_SPACE "空閑程序空間" +#define D_ESP_CHIP_ID "ESP晶片ID" +#define D_FLASH_CHIP_ID "快閃記憶體ID" +#define D_FLASH_CHIP_SIZE "快閃記憶體大小" +#define D_FREE_PROGRAM_SPACE "可用的程式空間" -#define D_UPGRADE_BY_WEBSERVER "通過Web升級" -#define D_OTA_URL "OTA地址" +#define D_UPGRADE_BY_WEBSERVER "透過網頁升級" +#define D_OTA_URL "OTA網址" #define D_START_UPGRADE "開始升級" -#define D_UPGRADE_BY_FILE_UPLOAD "通過文件升級" -#define D_UPLOAD_STARTED "開始上傳" -#define D_UPGRADE_STARTED "開始升級" -#define D_UPLOAD_DONE "上傳完成" -#define D_UPLOAD_ERR_1 "沒有選擇文件" -#define D_UPLOAD_ERR_2 "沒有足夠空間" -#define D_UPLOAD_ERR_3 "固件頭不是 0xE9" -#define D_UPLOAD_ERR_4 "固件太大" -#define D_UPLOAD_ERR_5 "上傳緩沖區不匹配" -#define D_UPLOAD_ERR_6 "上傳失敗。 啟用日志記錄 3" +#define D_UPGRADE_BY_FILE_UPLOAD "透過檔案升級" +#define D_UPLOAD_STARTED "已開始上傳" +#define D_UPGRADE_STARTED "已開始升級" +#define D_UPLOAD_DONE "已上傳完成" +#define D_UPLOAD_ERR_1 "沒選擇任何檔案" +#define D_UPLOAD_ERR_2 "可用空間不足" +#define D_UPLOAD_ERR_3 "魔術數字(Magic byte)不是 0xE9" +#define D_UPLOAD_ERR_4 "軟體刷入(Program flash)的大小超出實際記憶體的大小" +#define D_UPLOAD_ERR_5 "Upload buffer miscompare" +#define D_UPLOAD_ERR_6 "上傳失敗。 啟用日誌記錄 3" #define D_UPLOAD_ERR_7 "上傳取消" -#define D_UPLOAD_ERR_8 "錯誤的固件" -#define D_UPLOAD_ERR_9 "固件太大" +#define D_UPLOAD_ERR_8 "檔案無效" +#define D_UPLOAD_ERR_9 "檔案太大了" #define D_UPLOAD_ERR_10 "Failed to init RF chip" #define D_UPLOAD_ERR_11 "Failed to erase RF chip" #define D_UPLOAD_ERR_12 "Failed to write to RF chip" @@ -366,49 +366,49 @@ #define D_UPLOAD_ERROR_CODE "上傳錯誤代碼" #define D_ENTER_COMMAND "輸入命令" -#define D_ENABLE_WEBLOG_FOR_RESPONSE "如果預期響應，則啟用Weblog 2" -#define D_NEED_USER_AND_PASSWORD "需要 user=<用戶名>&password=<密碼>" +#define D_ENABLE_WEBLOG_FOR_RESPONSE "如果回應如預期，啟用Weblog 2" +#define D_NEED_USER_AND_PASSWORD "需要 user=<使用者名稱>&password=<密碼>" // xdrv_01_mqtt.ino -#define D_FINGERPRINT "驗證 TLS 指紋..." -#define D_TLS_CONNECT_FAILED_TO "TLS 連接失敗" -#define D_RETRY_IN "重試倒計時:" +#define D_FINGERPRINT "驗證 TLS 指紋碼..." +#define D_TLS_CONNECT_FAILED_TO "TLS 連線失敗，因為" +#define D_RETRY_IN "重新嘗試倒數" #define D_VERIFIED "驗證成功" -#define D_INSECURE "指紋無效導致連接不安全" -#define D_CONNECT_FAILED_TO "連接失敗:" +#define D_INSECURE "由於指紋碼無效，因此連線並未加密" +#define D_CONNECT_FAILED_TO "連線失敗:" // xplg_wemohue.ino -#define D_MULTICAST_DISABLED "組播已禁用" -#define D_MULTICAST_REJOINED "組播已(重新)加入" -#define D_MULTICAST_JOIN_FAILED "組播加入失敗" -#define D_FAILED_TO_SEND_RESPONSE "請求發送失敗" +#define D_MULTICAST_DISABLED "群播已停用" +#define D_MULTICAST_REJOINED "已(重新)加入群播" +#define D_MULTICAST_JOIN_FAILED "加入群播失敗" +#define D_FAILED_TO_SEND_RESPONSE "發送請求失敗" #define D_WEMO "WeMo" -#define D_WEMO_BASIC_EVENT "WeMo 基礎事件" +#define D_WEMO_BASIC_EVENT "WeMo 基本事件" #define D_WEMO_EVENT_SERVICE "WeMo 事件服務" #define D_WEMO_META_SERVICE "WeMo meta 服務" -#define D_WEMO_SETUP "WeMo 設置" -#define D_RESPONSE_SENT "發送請求" +#define D_WEMO_SETUP "WeMo 設定" +#define D_RESPONSE_SENT "請求已發送" #define D_HUE "Hue" -#define D_HUE_BRIDGE_SETUP "Hue 設置" -#define D_HUE_API_NOT_IMPLEMENTED "Hue API 未實現" +#define D_HUE_BRIDGE_SETUP "Hue 設定" +#define D_HUE_API_NOT_IMPLEMENTED "Hue API 尚未實現" #define D_HUE_API "Hue API" #define D_HUE_POST_ARGS "Hue POST 參數" -#define D_3_RESPONSE_PACKETS_SENT "3 請求包發送" +#define D_3_RESPONSE_PACKETS_SENT "3 請求封包已發送" // xdrv_07_domoticz.ino -#define D_DOMOTICZ_PARAMETERS "Domoticz 設置" +#define D_DOMOTICZ_PARAMETERS "Domoticz 設定" #define D_DOMOTICZ_IDX "Idx" #define D_DOMOTICZ_KEY_IDX "Key idx" #define D_DOMOTICZ_SWITCH_IDX "開關 idx" -#define D_DOMOTICZ_SENSOR_IDX "傳感器 idx" +#define D_DOMOTICZ_SENSOR_IDX "感應器 idx" #define D_DOMOTICZ_TEMP "溫度" - #define D_DOMOTICZ_TEMP_HUM "溫度,濕度" - #define D_DOMOTICZ_TEMP_HUM_BARO "溫度,濕度,氣壓" - #define D_DOMOTICZ_POWER_ENERGY "功率,電量" + #define D_DOMOTICZ_TEMP_HUM "溫度、濕度" + #define D_DOMOTICZ_TEMP_HUM_BARO "溫度、濕度、氣壓" + #define D_DOMOTICZ_POWER_ENERGY "功率、電量" #define D_DOMOTICZ_ILLUMINANCE "照度" - #define D_DOMOTICZ_COUNT "數值/PM1" + #define D_DOMOTICZ_COUNT "計數/PM1" #define D_DOMOTICZ_VOLTAGE "電壓/PM2.5" #define D_DOMOTICZ_CURRENT "電流/PM10" #define D_DOMOTICZ_AIRQUALITY "空氣品質" @@ -469,25 +469,25 @@ #define D_DEVICE_OUTPUT "Output" // xsns_05_ds18b20.ino -#define D_SENSOR_BUSY "傳感器正忙" -#define D_SENSOR_CRC_ERROR "傳感器 CRC 校驗錯誤" -#define D_SENSORS_FOUND "發現傳感器" +#define D_SENSOR_BUSY "感應器忙碌中" +#define D_SENSOR_CRC_ERROR "感應器 CRC 校驗錯誤" +#define D_SENSORS_FOUND "找到感應器了" // xsns_06_dht.ino #define D_TIMEOUT_WAITING_FOR "等待超時" -#define D_START_SIGNAL_LOW "開始低電平" -#define D_START_SIGNAL_HIGH "開始高電平" -#define D_PULSE "pulse" +#define D_START_SIGNAL_LOW "開始低電平(signal low)" +#define D_START_SIGNAL_HIGH "開始高電平(signal high)" +#define D_PULSE "脈衝" #define D_CHECKSUM_FAILURE "校驗失敗" // xsns_07_sht1x.ino -#define D_SENSOR_DID_NOT_ACK_COMMAND "傳感器沒有確認命令" -#define D_SHT1X_FOUND "發現 SHT1X 傳感器" +#define D_SENSOR_DID_NOT_ACK_COMMAND "感應器並未確認命令" +#define D_SHT1X_FOUND "發現 SHT1X 感應器了" // xsns_18_pms5003.ino #define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter #define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter -#define D_PARTICALS_BEYOND "顆粒物直徑大於" +#define D_PARTICALS_BEYOND "粒子" // xsns_27_apds9960.ino #define D_GESTURE "Gesture" @@ -705,7 +705,7 @@ #define D_SENSOR_TCP_RXD "TCP Rx" // Units -#define D_UNIT_AMPERE "安" +#define D_UNIT_AMPERE "安培" #define D_UNIT_CELSIUS "C" #define D_UNIT_CENTIMETER "cm" #define D_UNIT_DEGREE "°" @@ -719,13 +719,13 @@ #define D_UNIT_KILOMETER "km" #define D_UNIT_KILOGRAM "kg" #define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h" -#define D_UNIT_KILOOHM "千歐" -#define D_UNIT_KILOWATTHOUR "千瓦時" -#define D_UNIT_LUX "勒克斯" -#define D_UNIT_MICROGRAM_PER_CUBIC_METER "微克/立方米" +#define D_UNIT_KILOOHM "千歐姆" +#define D_UNIT_KILOWATTHOUR "千瓦小時" +#define D_UNIT_LUX "lux" +#define D_UNIT_MICROGRAM_PER_CUBIC_METER "微克/立方公尺" #define D_UNIT_MICROMETER "微米" #define D_UNIT_MICROSECOND "微秒" -#define D_UNIT_MILLIAMPERE "毫安" +#define D_UNIT_MILLIAMPERE "毫安培" #define D_UNIT_MILLIMETER "mm" #define D_UNIT_MILLIMETER_MERCURY "mmHg" #define D_UNIT_MILLISECOND "毫秒" @@ -736,15 +736,15 @@ #define D_UNIT_PERCENT "%%" #define D_UNIT_PRESSURE "百帕" #define D_UNIT_SECOND "秒" -#define D_UNIT_SECTORS "扇區" +#define D_UNIT_SECTORS "磁區" #define D_UNIT_VA "VA" #define D_UNIT_VAR "VAr" -#define D_UNIT_VOLT "伏" -#define D_UNIT_WATT "瓦" -#define D_UNIT_WATTHOUR "瓦時" +#define D_UNIT_VOLT "伏特" +#define D_UNIT_WATT "瓦特" +#define D_UNIT_WATTHOUR "瓦小時" #define D_UNIT_WATT_METER_QUADRAT "W/m²" -//SDM220, SDM120, LE01MR +//SDM220、 SDM120、 LE01MR #define D_PHASE_ANGLE "Phase Angle" #define D_IMPORT_ACTIVE "Import Active" #define D_EXPORT_ACTIVE "Export Active" @@ -819,4 +819,4 @@ #define D_SENSOR_BOILER_OT_RX "OpenTherm RX" #define D_SENSOR_BOILER_OT_TX "OpenTherm TX" -#endif // _LANGUAGE_ZH_TW_H_ +#endif // _LANGUAGE_ZH_TW_H_ \ No newline at end of file