From 45ffd2cdc3a5aa9011943c3c8c9777e51083d9b7 Mon Sep 17 00:00:00 2001 From: Theo Arends <11044339+arendst@users.noreply.github.com> Date: Fri, 31 Aug 2018 16:39:58 +0200 Subject: [PATCH] Prep release --- sonoff/_changelog.ino | 163 +++++++++++++++--------------------------- 1 file changed, 58 insertions(+), 105 deletions(-) diff --git a/sonoff/_changelog.ino b/sonoff/_changelog.ino index 6fc8a9fb5..b95a6ce0e 100644 --- a/sonoff/_changelog.ino +++ b/sonoff/_changelog.ino @@ -1,114 +1,67 @@ -/* 6.1.1.14 20180830 - * Add boot loop detection and perform some solutions - * Add features to and provide more stable display drivers - * - * 6.1.1.13 20180828 - * Fix 6.1.1.12 regression of Mem and Var default handling (#3618) - * Optimizations - * Change define USE_ALL_SENSORS to USE_SENSORS as it doesn't contain all sensors due to duplicate I2C addresses - * - * 6.1.1.12 20180827 - * Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have user control over debounce timing. Default is 50mS (#3594) - * Add rule variables %sunrise%, %sunset%, %uptime% and %time% (#3608) - * Fix handling use of default names when using names starting with shortcut character (#3392, #3600) - * Fix Sonoff Bridge data reception when using Portisch EFM8 firmware and in data buffer length (#3605) - * Add optional MQTT_TELE_RETAIN to Energy Margins message (#3612, 3614) - * Add Individual HSBColorX commands (#3430, #3615) - * Add RuleX debug options 8,9,10 (StopOnError) to control RuleX execution status after an exception restart (#3607) - * - * 6.1.1.11 20180826 - * Change scheduler phase 1/3 - Fixed when sleep is enabled: Uptime, Delay, PulseTime and TelePeriod (#3581) - * Change scheduler phase 2/3 - Fixed when sleep is enabled: Blinktime (#3581) - * Change scheduler phase 3/3 - Some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250 - * - * 6.1.1.10 20180827 +/* 6.2.0 20180901 + * Allow user override of define MAX_RULE_VARS and MAX_RULE_TIMERS (#3561) * Disable wifi sleep for both Esp8266/Arduino core 2.4.1 and 2.4.2 to solve device freeze caused by Espressif SDK bug (#3554) - * Rewrite GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP - * Add command Publish2 for publishing retained MQTT messages (#3593) - * - * 6.1.1.9 20180825 - * Allow user override of define MAX_RULE_TIMERS (#3561) - * Allow user override of define MAX_RULE_VARS - * Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525) - * Fix OtaMagic when file path contains a dash (-) (#3563) - * Fix EnergyReset3 (#2723) - * Change command sleep from restart after change to not restart after change (#3554) - * Add all ruletimer values to command RuleTimer result message (#3571) - * Add RGB support for Domoticz (#3547) - * - * 6.1.1.8 20180825 - * Fix MQTT reconnection detection when using TasmotaMqtt library (#3558) - * Add build time setting of ButtonTopic and SwitchTopic (#3414) - * Add display features and dynamic buffering - * - * 6.1.1.7 20180818 - * Add initial display support for Lcd, Oled, Matrix, Tft and e-paper - Need more docs - * Fix SDM120 reporting wrong negative values to Domoticz (#3521) - * Fix iFan02 power on state (#3412, #3530) - * Add display define USE_DISPLAY_MODES1TO5 to select display modes 1 to 5 - * Add command DisplayRotate 0..3 to select persistent display rotation - * - * 6.1.1.6 20180813 - * Add modulo option to rules like rule1 on Time#Minute|5 do backlog power on;delay 200;power off endon (#3466) - * - * 6.1.1.5 20180812 - * Fix some Pow R2 and S31 checksum errors using optimized re-sync - * - * 6.1.1.4 20180812 - * Change version representation from 1.1.1a to 1.1.1.1 for better change reference - * - * 6.1.1c 20180720 - * Add iFan02 Fanspeed + and Fanspeed - command options (#3415) - * Fix some Pow R2 and S31 checksum errors (#3425) - * Change CounterType 1 from milliseconds to microseconds (#3437) - * Add output support on MCP23008/MCP23017 (#3436) - * Fix LM75AD I2C sensor detection (#3408) - * Add message when JavaScript is not enabled in webbrowser (#3388) - * Fix sonoff-minimal from using default settings - * Add option + to command Rule to concatenate new rule with existing rules (#3365) - * Add initial support for sensor MPU6050 (#3352) - * Add command SerialSend4 to send binary serial data (#3345) - * Add rule triggers Wifi#Connected and Wifi#Disconnected (#3359) - * Fix unsecure main webpage update - * Add Turkish language file (#3332) - * Fix command TimeDst/TimeStd invalid JSON (#3322) - * Fix possible WDT due to long MQTT publish handling (#3313) - * Fix CCS811 temperature and humidity compensation - * Add support for CCS811 sensor (#3309) - * Add command Timers 0/1 to globally disable or enable armed timers (#3270) - * - * 6.1.1b 20180715 - * Add support for MPR121 controller in input mode for touch buttons (#3142) - * Add support for MCP230xx for general purpose input expansion and command Sensor29 (#3188) - * Fix command Scale buffer overflow (#3236) - * Fix rules once regression from v6.1.0 (#3198, #3226) - * Add default Wifi Configuration tool as define WIFI_CONFIG_NO_SSID in user_config.h if no SSID is configured (#3224) - * Add user selection of Wifi Smartconfig as define USE_SMARTCONFIG in user_config.h - * Add user selection of WPS as define USE_WPS in user_config.h in preparation for core v2.4.2 (#3221) - * Change default Wifi config option from WPS to Wifi Manager if WPS is disabled - * or Wifi Smartconfig if webserver is disabled - * or Wifi Serial input if Smartconfig is disabled - * Remove WPS and SmartConfig from sonoff-minimal saving 56k code space - * - * 6.1.1a 20180714 - * Fix TM1638 compile error (#3212) - * Add TM1638 switch support (#2226) - * Fix invalid response using more than 4 switches and domoticz - * Update sensor drivers to provide instant results - * Add read sensor retry to DS18B20, DS18x20, DHT, SHT1X and HTU21 - * Change SHT1x driver to provide better instant results - * Fix DHT driver mixing values for different sensors (#1797) + * Change DS18B20 driver to provide better instant results + * Change some sensor drivers to provide instant results + * Change define USE_ALL_SENSORS to USE_SENSORS as it doesn't contain all sensors due to duplicate I2C addresses + * Change some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250 + * Change default Wifi config option from WPS to Wifi Manager if WPS is disabled or Wifi Smartconfig if webserver is disabled or Wifi Serial input if Smartconfig is disabled + * Change SHT1x driver to provide better instant results and fix I2C interference * Change DHT driver to provide better instant results and add decimals to DHT11 (#3164) * Change DS18x20 driver to provide better instant results (#3169) - * Change DS18B20 driver to provide better instant results + * Change CounterType 1 from milliseconds to microseconds (#3437) + * Change scheduler for better sleep support using Uptime, Delay, PulseTime and TelePeriod, Blinktime (#3581) + * Remove unused functionality from Sonoff-minimal to save space + * Remove WPS and SmartConfig from sonoff-minimal saving 56k code space * Remove TSL2561 debug message and update library (#2415) - * Change SHT1x sensor initialization from pre-teleperiod to once during restart to fix I2C interference + * Remove forced restart when sleep command is executed (#3554) + * Fix invalid response using more than 4 switches and domoticz + * Fix sonoff-minimal not using default settings + * Fix unsecure main webpage update + * Fix DHT driver mixing values for different sensors (#1797) + * Fix EnergyReset3 regression not clearing total energy (#2723) + * Fix rules once regression from v6.1.0 (#3198, #3226) + * Fix command Scale buffer overflow (#3236) + * Fix possible WDT due to long MQTT publish handling (#3313) + * Fix command TimeDst/TimeStd invalid JSON (#3322) + * Fix handling of default names when using names starting with shortcut character ",0,1 or 2 (#3392, #3600, #3618) + * Fix LM75AD I2C sensor detection (#3408) + * Fix iFan02 power on state (#3412, #3530) + * Fix some Pow R2 and S31 checksum errors using optimized re-sync (#3425) + * Fix SDM120 reporting wrong negative values to Domoticz (#3521) + * Fix MQTT reconnection detection when using TasmotaMqtt library (#3558) + * Fix OtaMagic when file path contains a dash (-) (#3563) + * Fix Sonoff Bridge data reception when using Portisch EFM8 firmware using in data buffer length (#3605) + * Add read sensor retry to DS18B20, DS18x20, DHT, SHT1X and HTU21 + * Add user selection of Wifi Smartconfig as define USE_SMARTCONFIG in user_config.h + * Add boot loop detection and perform some solutions * Add wifi and mqtt status led blinkyblinky to be disabled by SetOption31 1. Does not work when LedPower is On (deliberate) (#871, #2230, #3114, #3155) - * Add experimental (untested) TM1638 switch support (#2226) + * Add support for TM1638 switch (#2226) + * Add GPIO options ButtonXn, SwitchXn and CounterXn to select INPUT mode instead of INPUT_PULLUP (#2525) * Add support for APDS9960 proximity sensor (#3051) - * Add heap and stack debug information - * Add debug facilities using optional xdrv_99_debug.ino to enable in user_config.h - * Remove not needed functionality from Sonoff-minimal to save space + * Add support for MPR121 controller in input mode for touch buttons (#3142) + * Add support for MCP230xx for general purpose input expansion and command Sensor29 (#3188) + * Add default Wifi Configuration tool as define WIFI_CONFIG_NO_SSID in user_config.h if no SSID is configured (#3224) + * Add command Timers 0/1 to globally disable or enable armed timers (#3270) + * Add support for CCS811 sensor (#3309) + * Add Turkish language file (#3332) + * Add command SerialSend4 to send binary serial data (#3345) + * Add initial support for sensor MPU6050 (#3352) + * Add rule triggers Wifi#Connected and Wifi#Disconnected (#3359) + * Add option + to command Rule to concatenate new rule with existing rules (#3365) + * Add message when JavaScript is not enabled in webbrowser (#3388) + * Add build time setting of ButtonTopic and SwitchTopic (#3414) + * Add iFan02 Fanspeed + and Fanspeed - command options (#3415) + * Add Individual HSBColorX commands (#3430, #3615) + * Add output support on MCP23008/MCP23017 (#3436) + * Add modulo option to rules like rule1 on Time#Minute|5 do backlog power on;delay 200;power off endon (#3466) + * Add RGB support for Domoticz (#3547) + * Add all ruletimer values to command RuleTimer result message (#3571) + * Add command Publish2 for publishing retained MQTT messages (#3593) + * Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have user control over debounce timing. Default is 50mS (#3594) + * Add RuleX debug options 8,9,10 (StopOnError) to control RuleX execution status after an exception restart (#3607) + * Add rule variables %sunrise%, %sunset%, %uptime% and %time% (#3608) + * Add optional MQTT_TELE_RETAIN to Energy Margins message (#3612, 3614) * * 6.1.1 20180714 * Revert wifi changes (#3177)