diff --git a/CHANGELOG.md b/CHANGELOG.md
index 032b3e023..48cd42700 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -3,7 +3,21 @@ All notable changes to this project will be documented in this file.
 
 ## [Unreleased] - Development
 
-## [9.2.0.7]
+## [9.3.0.1]
+### Changed
+- Remove the need to start filenames with a slash (/) in Ufs commands
+- Removed command ``VirtualCT`` as synonym for ``SetOption106`` (#11049)
+
+### Fixed
+- Ili1942 driver (#11046)
+- ESP32 Mi32 driver (#11048)
+
+## [Released]
+
+## [9.3.0] 20210219
+- Release Kenneth
+
+## [9.2.0.7] 20210219
 ### Added
 - Support for Device Groups Device Map (#10898)
 - Support for Eastron SDM72D-M three phase 100A Modbus energy meter (#10862)
@@ -132,8 +146,6 @@ All notable changes to this project will be documented in this file.
 - Compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2
 - Prometheus memory leak (#10221)
 
-## [Released]
-
 ## [9.2.0] 20201216
 - Release Julie
 
diff --git a/FIRMWARE.md b/FIRMWARE.md
index da20d75f9..e7c03c036 100644
--- a/FIRMWARE.md
+++ b/FIRMWARE.md
@@ -18,7 +18,7 @@ See [CHANGELOG.md](https://github.com/arendst/Tasmota/blob/development/tasmota/C
 
 ## Development
 
-[![Dev Version](https://img.shields.io/badge/development%20version-v9.2.x.x-blue.svg)](https://github.com/arendst/Tasmota)
+[![Dev Version](https://img.shields.io/badge/development%20version-v9.3.x.x-blue.svg)](https://github.com/arendst/Tasmota)
 [![Download Dev](https://img.shields.io/badge/download-development-yellow.svg)](http://ota.tasmota.com/tasmota/)
 [![Tasmota CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+CI%22)
 [![Tasmota ESP32 CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20ESP32%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+ESP32+CI%22)
diff --git a/README.md b/README.md
index 4b41da5cf..232c92565 100644
--- a/README.md
+++ b/README.md
@@ -21,7 +21,7 @@ In addition to the [release webpage](https://github.com/arendst/Tasmota/releases
 
 ## Development
 
-[![Dev Version](https://img.shields.io/badge/development%20version-v9.2.x.x-blue.svg)](https://github.com/arendst/Tasmota)
+[![Dev Version](https://img.shields.io/badge/development%20version-v9.3.x.x-blue.svg)](https://github.com/arendst/Tasmota)
 [![Download Dev](https://img.shields.io/badge/download-development-yellow.svg)](http://ota.tasmota.com/tasmota/)
 [![Tasmota CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+CI%22)
 [![Tasmota ESP32 CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20ESP32%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+ESP32+CI%22)
diff --git a/RELEASENOTES.md b/RELEASENOTES.md
index 082ca49e7..8df5b85cc 100644
--- a/RELEASENOTES.md
+++ b/RELEASENOTES.md
@@ -78,94 +78,11 @@ The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota
 
 [Complete list](BUILDS.md) of available feature and sensors.
 
-## Changelog v9.2.0.7
-### Added
-- Command ``CTRange`` to specify the visible CT range the bulb is capable of [#10311](https://github.com/arendst/Tasmota/issues/10311)
-- Command ``L1MusicSync <0|Off>|<1|On>|<2|Toggle>, 1..10, 1..100>`` to control Sonoff L1 Music Sync mode sensitivity and speed [#10722](https://github.com/arendst/Tasmota/issues/10722)
-- Command ``RuleTimer0`` to access all RuleTimers at once [#10352](https://github.com/arendst/Tasmota/issues/10352)
-- Command ``Speed2`` to control a once off fade [#10741](https://github.com/arendst/Tasmota/issues/10741)
-- Command ``VirtualCT`` to simulate or fine tune CT bulbs with 3,4,5 channels [#10311](https://github.com/arendst/Tasmota/issues/10311)
-- Command ``SetOption40 0..250`` to disable button functionality if activated for over 0.1 second re-introduced
-- Command ``SetOption43 1..255`` to control Rotary step [#10407](https://github.com/arendst/Tasmota/issues/10407)
-- Command ``SetOption118 1`` to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default [#10353](https://github.com/arendst/Tasmota/issues/10353)
-- Command ``SetOption119 1`` to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic [#10355](https://github.com/arendst/Tasmota/issues/10355)
-- Zigbee command ``SetOption120 1`` or ``ZbEndpointTopic 1`` to add the zigbee endpoint as suffix in topic when using ``SetOption89 1``
-- Zigbee command ``ZbScan`` to do an energy scan on each radio channel
-- Commands ``ChannelRemap``, ``MultiPWM``, ``AlexaCTRange``, ``PowerOnFade``, ``PWMCT``, ``WhiteBlend`` and ``VirtualCT`` as synonyms for ``SetOption37, 68, 82, 91, 92, 105`` and ``106``
-- Commands ``ZbNameKey``, ``ZbDeviceTopic``, ``ZbNoPrefix``, ``ZbEndpointSuffix``, ``ZbNoAutoBind`` and ``ZbNameTopic`` as synonyms for ``SetOption83, 89, 100, 101, 110`` and ``112``
-- Commands ``ZbNoAutoBind``, ``ZbReceivedTopic`` and ``ZbOmitDevice`` as synonyms for ``SetOption116, 118`` and ``119``
-- Commands ``BuzzerActive`` and ``BuzzerPwm`` as synonyms for ``SetOption67`` and ``111``
-- Filesystem commands ``Ufs``, ``UfsType``, ``UfsSize``, ``UfsFree``, ``UfsDelete``, ``UfsRename`` and ``UfsRun``
-- Support for filesystem ``autoexec.bat`` to execute sequential commands like backlog
-- Milliseconds to console output [#10152](https://github.com/arendst/Tasmota/issues/10152)
-- Gpio ``Option_a1`` enabling PWM2 high impedance if powered off as used by Wyze bulbs [#10196](https://github.com/arendst/Tasmota/issues/10196)
-- Rotary No Pullup GPIO selection ``Rotary A/B_n`` [#10407](https://github.com/arendst/Tasmota/issues/10407)
-- BSSID and Signal Strength Indicator to GUI wifi scan result [#10253](https://github.com/arendst/Tasmota/issues/10253)
-- Support for P9813 RGB Led MOSFET controller [#10104](https://github.com/arendst/Tasmota/issues/10104)
-- Support for GPIO option selection
-- Support for FTC532 8-button touch controller by Peter Franck [#10222](https://github.com/arendst/Tasmota/issues/10222)
-- Support for BS814A-2 8-button touch buttons by Peter Franck [#10447](https://github.com/arendst/Tasmota/issues/10447)
-- Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck [#10481](https://github.com/arendst/Tasmota/issues/10481)
-- Support for TOF10120 time of flight sensor by Cyril Pawelko [#10190](https://github.com/arendst/Tasmota/issues/10190)
-- Support for Afrikaans language translations by Christiaan Heerze
-- Support for Frysk language translations by Christiaan Heerze
-- Support for IR inverted leds using ``#define IR_SEND_INVERTED true`` [#10301](https://github.com/arendst/Tasmota/issues/10301)
-- Support for disabling 38kHz IR modulation using ``#define IR_SEND_USE_MODULATION false`` [#10301](https://github.com/arendst/Tasmota/issues/10301)
-- Support for SPI display driver for ST7789 TFT by Gerhard Mutz [#9037](https://github.com/arendst/Tasmota/issues/9037)
-- Support for TM1637 seven segment display by Ajith Vasudevan [#10889](https://github.com/arendst/Tasmota/issues/10889)
-- Support for time proportioned (``#define USE_TIMEPROP``) and optional PID (``#define USE_PID``) relay control [#10412](https://github.com/arendst/Tasmota/issues/10412)
-- Support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther [#3647](https://github.com/arendst/Tasmota/issues/3647)
-- Support for SM2135 current selection using GPIO ``SM2135 DAT`` index [#10634](https://github.com/arendst/Tasmota/issues/10634)
-- Support for Sugar Valley NeoPool Controller by Norbert Richter [#10637](https://github.com/arendst/Tasmota/issues/10637)
-- Support for Device Groups Device Map [#10898](https://github.com/arendst/Tasmota/issues/10898)
-- Support for Eastron SDM72D-M three phase 100A Modbus energy meter [#10862](https://github.com/arendst/Tasmota/issues/10862)
-- Support for ESP32 ``Module 3`` Odroid Go 16MB binary tasmota32-odroidgo.bin [#8630](https://github.com/arendst/Tasmota/issues/8630)
-- Support for ESP32 ``Module 5`` Wireless Tag Eth01 [#9496](https://github.com/arendst/Tasmota/issues/9496)
-- Support for ESP32 ``Module 7`` M5stack core2 16MB binary tasmota32-core2.bin [#10635](https://github.com/arendst/Tasmota/issues/10635)
-- Support for Berry language on ESP32
-- Support rotary encoder on Shelly Dimmer [#10407](https://github.com/arendst/Tasmota/issues/10407#issuecomment-756240920)
-- Support character `#` to be replaced by `space`-character in command ``Publish`` topic [#10258](https://github.com/arendst/Tasmota/issues/10258)
-- Support trailing silence in buzzer tune [#10694](https://github.com/arendst/Tasmota/issues/10694)
-- Rule trigger string comparisons for EndsWith ``$>``, StartsWith ``$<`` and Contains ``$|`` [#10538](https://github.com/arendst/Tasmota/issues/10538)
-- SPI display driver SSD1331 Color oled by Jeroen Vermeulen [#10376](https://github.com/arendst/Tasmota/issues/10376)
-- Compile time option ``USE_MQTT_TLS_DROP_OLD_FINGERPRINT`` to drop old (less secure) TLS fingerprint
-- ESP8266 Fallback to ``*.bin.gz`` binary when OTA upload of ``*.bin`` binary fails
-
-### Breaking Changed
-- ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files
-- Replaced MFRC522 13.56MHz rfid card reader GPIO selection from ``SPI CS`` by ``RC522 CS``
-- Replaced NRF24L01 GPIO selection from ``SPI CS`` by ``NRF24 CS`` and ``SPI DC`` by ``NRF24 DC``
-- Replaced ILI9341 GPIO selection from ``SPI CS`` by ``ILI9341 CS`` and ``SPI DC`` by ``ILI9341 DC``
-- Replaced ST7789 GPIO selection from ``SPI CS`` by ``ST7789 CS`` and ``SPI DC`` by ``ST7789 DC``
-- Replaced ILI9488 GPIO selection from ``SPI CS`` by ``ILI9488_CS``
-- Replaced EPaper29 GPIO selection from ``SPI CS`` by ``EPaper29 CS``
-- Replaced EPaper42 GPIO selection from ``SPI CS`` by ``EPaper42 CS``
-- Replaced SSD1351 GPIO selection from ``SPI CS`` by ``SSD1351 CS``
-- Replaced RA8876 GPIO selection from ``SPI CS`` by ``RA8876 CS``
-
+## Changelog v9.3.0.1
 ### Changed
-- Remove support for direct migration from versions before v8.1.0 (Doris)
-- IRremoteESP8266 library from v2.7.14 to v2.7.15
-- NeoPixelBus library from v2.6.0 to v2.6.1.4
-- ILI9341 library from Adafruit_ILI9341-1.2.0-Tasmota-1.0 to ILI9341-gemu-1.0
-- Command ``Sleep 0`` removes any sleep from wifi modem except when ESP32 BLE is active
-- Logging from heap to stack freeing 700 bytes RAM
-- Disabled ``USE_LIGHT`` light support for ZBBridge saving 17.6kB [#10374](https://github.com/arendst/Tasmota/issues/10374)
-- Force initial default state ``SetOption57 1`` to scan wifi network every 44 minutes for strongest signal [#10395](https://github.com/arendst/Tasmota/issues/10395)
-- PubSubClient MQTT_SOCKET_TIMEOUT from 15 to 4 seconds
-- Domoticz fixed 2 decimals resolution by user selectable ``TempRes``, ``HumRes`` and ``PressRes`` resolutions
-- Increase number of button GPIOs from 4 to 8
-- ESP32 Increase number of switch GPIOs from 8 to 28
-- ESP32 increase number of relay GPIOs from 8 to 28
-- ESP32 Increase number of interlock groups from 4 to 14
+- Remove the need to start filenames with a slash (/) in Ufs commands
+- Removed command ``VirtualCT`` as synonym for ``SetOption106`` [#11049](https://github.com/arendst/Tasmota/issues/11049)
 
 ### Fixed
-- Redesign syslog and mqttlog using log buffer [#10164](https://github.com/arendst/Tasmota/issues/10164)
-- Shutter stop issue [#10170](https://github.com/arendst/Tasmota/issues/10170)
-- Scripter script_sub_command [#10181](https://github.com/arendst/Tasmota/issues/10181)
-- Scripter JSON variable above 32 chars [#10193](https://github.com/arendst/Tasmota/issues/10193)
-- Shelly Dimmer power on state [#10154](https://github.com/arendst/Tasmota/issues/10154) [#10182](https://github.com/arendst/Tasmota/issues/10182)
-- Wemo emulation for single devices [#10165](https://github.com/arendst/Tasmota/issues/10165) [#10194](https://github.com/arendst/Tasmota/issues/10194)
-- ESP32 LoadStoreError when using ``#define USER_TEMPLATE`` [#9506](https://github.com/arendst/Tasmota/issues/9506)
-- Compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2
-- Prometheus memory leak [#10221](https://github.com/arendst/Tasmota/issues/10221)
+- Ili1942 driver [#11046](https://github.com/arendst/Tasmota/issues/11046)
+- ESP32 Mi32 driver [#11048](https://github.com/arendst/Tasmota/issues/11048)
diff --git a/lib/lib_display/ILI9341-gemu-1.0/ILI9341_2.cpp b/lib/lib_display/ILI9341-gemu-1.0/ILI9341_2.cpp
index 808c60362..ebf828790 100644
--- a/lib/lib_display/ILI9341-gemu-1.0/ILI9341_2.cpp
+++ b/lib/lib_display/ILI9341-gemu-1.0/ILI9341_2.cpp
@@ -175,7 +175,7 @@ void ILI9341_2::writecmd(uint8_t d) {
 void ILI9341_2::init(uint16_t width, uint16_t height) {
   //sspi2 = SPISettings(2500000, MSBFIRST, SPI_MODE3);
 
-  if (_hwspi == 2) {
+  if (_hwspi >= 2) {
     iwidth = ILI9341_TFTWIDTH;
     iheight = ILI9341_TFTHEIGHT;
   } else {
@@ -187,8 +187,13 @@ void ILI9341_2::init(uint16_t width, uint16_t height) {
 
   sspi2 = SPISettings(40000000, MSBFIRST, SPI_MODE0);
 
-  if (_hwspi==2) {
-    spi2=&SPI;
+  if (_hwspi >= 2) {
+    spi2 = &SPI;
+#ifdef ESP32
+    if (_hwspi > 2) {
+      spi2->begin(_sclk, _miso, _mosi, -1);
+    }
+#endif // ESP32
   } else {
 #ifdef ESP32
     if (_spibus == 2) {
@@ -522,7 +527,7 @@ void ili9342_bpwr(uint8_t on);
 
 void ILI9341_2::DisplayOnff(int8_t on) {
 
-  if (_hwspi==2) {
+  if (_hwspi>=2) {
     ili9342_bpwr(on);
   }
 
@@ -572,7 +577,7 @@ void ILI9341_2::dim(uint8_t dim) {
   if (_bp>=0) {
     ledcWrite(ESP32_PWM_CHANNEL,dimmer);
   } else {
-    if (_hwspi==2) {
+    if (_hwspi>=2) {
       ili9342_dimm(dim);
     }
   }
diff --git a/tasmota/i18n.h b/tasmota/i18n.h
index 1c5c9b588..0edd337fa 100644
--- a/tasmota/i18n.h
+++ b/tasmota/i18n.h
@@ -433,7 +433,6 @@
 #define D_SO_POWERONFADE "PowerOnFade"      // SO91
 #define D_SO_PWMCT "PWMCT"                  // SO92
 #define D_SO_WHITEBLEND "WhiteBlend"        // SO105
-#define D_SO_VIRTUALCT "VirtualCT"          // SO106
 #define D_CMND_CHANNEL "Channel"
 #define D_CMND_COLOR "Color"
 #define D_CMND_COLORTEMPERATURE "CT"
diff --git a/tasmota/tasmota_version.h b/tasmota/tasmota_version.h
index ec0ef2dcf..ce1ad81f9 100644
--- a/tasmota/tasmota_version.h
+++ b/tasmota/tasmota_version.h
@@ -20,6 +20,6 @@
 #ifndef _TASMOTA_VERSION_H_
 #define _TASMOTA_VERSION_H_
 
-const uint32_t VERSION = 0x09020007;
+const uint32_t VERSION = 0x09030001;
 
 #endif  // _TASMOTA_VERSION_H_
diff --git a/tasmota/xdrv_04_light.ino b/tasmota/xdrv_04_light.ino
index 0144d826d..f60a6bdbd 100644
--- a/tasmota/xdrv_04_light.ino
+++ b/tasmota/xdrv_04_light.ino
@@ -131,7 +131,7 @@ const uint8_t LIGHT_COLOR_SIZE = 25;   // Char array scolor size
 const char kLightCommands[] PROGMEM = "|"  // No prefix
   // SetOptions synonyms
   D_SO_CHANNELREMAP "|" D_SO_MULTIPWM "|" D_SO_ALEXACTRANGE "|" D_SO_POWERONFADE "|" D_SO_PWMCT "|"
-  D_SO_WHITEBLEND "|" D_SO_VIRTUALCT "|"
+  D_SO_WHITEBLEND "|"
   // Other commands
   D_CMND_COLOR "|" D_CMND_COLORTEMPERATURE "|" D_CMND_DIMMER "|" D_CMND_DIMMER_RANGE "|" D_CMND_DIMMER_STEP "|" D_CMND_LEDTABLE "|" D_CMND_FADE "|"
   D_CMND_RGBWWTABLE "|" D_CMND_SCHEME "|" D_CMND_SPEED "|" D_CMND_WAKEUP "|" D_CMND_WAKEUPDURATION "|"
@@ -150,7 +150,7 @@ const char kLightCommands[] PROGMEM = "|"  // No prefix
 
 SO_SYNONYMS(kLightSynonyms,
   37, 68, 82, 91, 92,
-  105, 106,
+  105,
 );
 
 void (* const LightCommand[])(void) PROGMEM = {
diff --git a/tasmota/xdrv_50_filesystem.ino b/tasmota/xdrv_50_filesystem.ino
index 2ed092618..3a5626cfb 100644
--- a/tasmota/xdrv_50_filesystem.ino
+++ b/tasmota/xdrv_50_filesystem.ino
@@ -426,6 +426,14 @@ bool UfsExecuteCommandFile(const char *fname) {
  * Commands
 \*********************************************************************************************/
 
+const int UFS_FILENAME_SIZE = 48;
+
+char* UfsFilename(char* fname, char* fname_in) {
+  fname_in = Trim(fname_in);  // Remove possible leading spaces
+  snprintf_P(fname, UFS_FILENAME_SIZE, PSTR("%s%s"), ('/' == fname_in[0]) ? "" : "/", fname_in);
+  return fname;
+}
+
 const char kUFSCommands[] PROGMEM = "Ufs|"  // Prefix
   "|Type|Size|Free|Delete|Rename|Run";
 
@@ -468,11 +476,13 @@ void UFSDelete(void) {
   // UfsDelete  sdcard or flashfs file if only one of them available
   // UfsDelete2 flashfs file if available
   if (XdrvMailbox.data_len > 0) {
+    char fname[UFS_FILENAME_SIZE];
+    UfsFilename(fname, XdrvMailbox.data);
     bool result = false;
     if (ffs_type && (ffs_type != ufs_type) && (2 == XdrvMailbox.index)) {
-      result = TfsDeleteFile(XdrvMailbox.data);
+      result = TfsDeleteFile(fname);
     } else {
-      result = (ufs_type && ufsp->remove(XdrvMailbox.data));
+      result = (ufs_type && ufsp->remove(fname));
     }
     if (!result) {
       ResponseCmndFailed();
@@ -487,13 +497,17 @@ void UFSRename(void) {
   // UfsRename2 flashfs file if available
   if (XdrvMailbox.data_len > 0) {
     bool result = false;
-    const char *fname1 = strtok(XdrvMailbox.data, ",");
-    const char *fname2 = strtok(nullptr, ",");
+    char *fname1 = strtok(XdrvMailbox.data, ",");
+    char *fname2 = strtok(nullptr, ",");
     if (fname1 && fname2) {
+      char fname_old[UFS_FILENAME_SIZE];
+      UfsFilename(fname_old, fname1);
+      char fname_new[UFS_FILENAME_SIZE];
+      UfsFilename(fname_new, fname2);
       if (ffs_type && (ffs_type != ufs_type) && (2 == XdrvMailbox.index)) {
-        result = TfsRenameFile(fname1, fname2);
+        result = TfsRenameFile(fname_old, fname_new);
       } else {
-        result = (ufs_type && ufsp->rename(fname1, fname2));
+        result = (ufs_type && ufsp->rename(fname_old, fname_new));
       }
     }
     if (!result) {
@@ -506,7 +520,8 @@ void UFSRename(void) {
 
 void UFSRun(void) {
   if (XdrvMailbox.data_len > 0) {
-    if (UfsExecuteCommandFile(XdrvMailbox.data)) {
+    char fname[UFS_FILENAME_SIZE];
+    if (UfsExecuteCommandFile(UfsFilename(fname, XdrvMailbox.data))) {
       ResponseClear();
     } else {
       ResponseCmndFailed();
diff --git a/tasmota/xdsp_04_ili9341.ino b/tasmota/xdsp_04_ili9341.ino
index ca06dc244..2b1a31a73 100644
--- a/tasmota/xdsp_04_ili9341.ino
+++ b/tasmota/xdsp_04_ili9341.ino
@@ -65,7 +65,7 @@ void ILI9341_InitDriver()
 #ifdef USE_DISPLAY_ILI9341
     uint8_t dtype = 1;
 #else
-    uint8_t dtype = 2;
+    uint8_t dtype = 3; // sign ili9342 with variable spi pins
 #endif // USE_DISPLAY_ILI9341
 
     // default colors
diff --git a/tasmota/xsns_62_esp32_mi_ble.ino b/tasmota/xsns_62_esp32_mi_ble.ino
index 44a475942..8b7b760ba 100644
--- a/tasmota/xsns_62_esp32_mi_ble.ino
+++ b/tasmota/xsns_62_esp32_mi_ble.ino
@@ -1941,9 +1941,21 @@ void MI32EverySecond(bool restart){
   MI32TimeoutSensors();
 
   if (MI32.option.MQTTType == 0){
+    // show tas style sensor MQTT
     MI32ShowSomeSensors();
-  } else { 
+  }
+  
+  if (MI32.option.MQTTType == 1 
+#ifdef USE_HOME_ASSISTANT
+    ||
+    Settings.flag.hass_discovery
+#endif
+  ) { 
+    // these two share a counter
+    // discovery only sent if hass_discovery
     MI32DiscoveryOneMISensor();
+    // show independent style sensor MQTT
+    // note - if !MQTTType, then this is IN ADDITION to 'normal'
     MI32ShowOneMISensor();
   }