diff --git a/tasmota/language/zh_CN.h b/tasmota/language/zh_CN.h
index 2a8158b8c..c06627648 100644
--- a/tasmota/language/zh_CN.h
+++ b/tasmota/language/zh_CN.h
@@ -130,7 +130,7 @@
 #define D_MULTI_PRESS "多次按键"
 #define D_NOISE "嘈杂"
 #define D_NONE "无"
-#define D_O2 "Oxygen"
+#define D_O2 "氧"
 #define D_OFF "关"
 #define D_OFFLINE "离线"
 #define D_OK "好"
@@ -140,7 +140,7 @@
 #define D_PASSWORD "密码"
 #define D_PH "pH"
 #define D_MQ "MQ"
-#define D_PARTITION "Partition"      // As in flash and firmware partition
+#define D_PARTITION "分区"      // As in flash and firmware partition
 #define D_PORT "端口"
 #define D_POWER_FACTOR "功率因数"
 #define D_POWERUSAGE "功率"
@@ -177,14 +177,14 @@
 #define D_TO "to"
 #define D_TOGGLE "切换"
 #define D_TOPIC "主题"
-#define D_TOTAL_USAGE "Total Usage"
+#define D_TOTAL_USAGE "总共使用"
 #define D_TRANSMIT "发送"
 #define D_TRUE "True"
 #define D_TVOC "TVOC"
 #define D_UPGRADE "升级"
 #define D_UPLOAD "上传"
 #define D_UPTIME "运行时间"
-#define D_USED "used"
+#define D_USED "已使用"
 #define D_USER "用户名"
 #define D_UTC_TIME "UTC"
 #define D_UV_INDEX "紫外线指数"
@@ -202,9 +202,9 @@
 #define D_VOLUME "Volume"
 #define D_WEIGHT "重量"
 #define D_WARMLIGHT "暖"
-#define D_WEB_SERVER "Web Server"
-#define D_SOC "State of Charge"
-#define D_SOH "State of Health"
+#define D_WEB_SERVER "Web服务器"
+#define D_SOC "充电状态"
+#define D_SOH "充电健康"
 
 // tasmota.ino
 #define D_WARNING_MINIMAL_VERSION "警告：精简固件不支持持久保存设置"
@@ -216,7 +216,7 @@
 #define D_SET_BAUDRATE_TO "设置波特率为:"
 #define D_RECEIVED_TOPIC "接收到的主题:"
 #define D_DATA_SIZE "数据大小:"
-#define D_ANALOG_INPUT "Analog"
+#define D_ANALOG_INPUT "模拟"
 
 // support.ino
 #define D_OSWATCH "osWatch"
@@ -300,18 +300,18 @@
 #define D_WPA_PSK "WPA PSK"
 #define D_WPA2_PSK "WPA2 PSK"
 #define D_AP1_SSID "WiFi 名称"
-#define D_AP1_SSID_HELP "Type or Select your WiFi Network"
+#define D_AP1_SSID_HELP "输入或选择您的WiFi网络"
 #define D_AP2_SSID "WiFi 名称 2"
-#define D_AP2_SSID_HELP "Type your Alternative WiFi Network"
+#define D_AP2_SSID_HELP "输入您的备用WiFi网络"
 #define D_AP_PASSWORD "WiFi 密码"
-#define D_AP_PASSWORD_HELP "Enter your WiFi Password"
-#define D_SELECT_YOUR_WIFI_NETWORK "Select your WiFi Network"
-#define D_SHOW_MORE_WIFI_NETWORKS "Scan for all WiFi Networks"
-#define D_SHOW_MORE_OPTIONS "More Options"
-#define D_CHECK_CREDENTIALS "Please, check your credentials"
-#define D_SUCCESSFUL_WIFI_CONNECTION "Successful WiFi Connection"
-#define D_NOW_YOU_CAN_CLOSE_THIS_WINDOW "Now you can close this window"
-#define D_REDIRECTING_TO_NEW_IP "Redirecting to new device's IP address"
+#define D_AP_PASSWORD_HELP "输入您的WiFi密码"
+#define D_SELECT_YOUR_WIFI_NETWORK "选择你的Wifi网络"
+#define D_SHOW_MORE_WIFI_NETWORKS "扫描所有WiFi网络"
+#define D_SHOW_MORE_OPTIONS "更多选项"
+#define D_CHECK_CREDENTIALS "请检查您的密码"
+#define D_SUCCESSFUL_WIFI_CONNECTION "WiFi连接成功"
+#define D_NOW_YOU_CAN_CLOSE_THIS_WINDOW "您现在可以关闭这个窗口"
+#define D_REDIRECTING_TO_NEW_IP "重定向到新设备的 IP 地址"
 
 #define D_MQTT_PARAMETERS "MQTT 设置"
 #define D_CLIENT "客户端"
@@ -319,7 +319,7 @@
 
 #define D_LOGGING_PARAMETERS "日志设置"
 #define D_SERIAL_LOG_LEVEL "串口日志级别"
-#define D_MQTT_LOG_LEVEL "Mqtt log level"
+#define D_MQTT_LOG_LEVEL "Mqtt 日志级别"
 #define D_WEB_LOG_LEVEL "Web 日志级别"
 #define D_SYS_LOG_LEVEL "Syslog 日志级别"
 #define D_MORE_DEBUG "全部调试"
@@ -330,7 +330,7 @@
 #define D_OTHER_PARAMETERS "其他设置"
 #define D_TEMPLATE "模板"
 #define D_ACTIVATE "启用"
-#define D_DEVICE_NAME "Device Name"
+#define D_DEVICE_NAME "设备名称"
 #define D_WEB_ADMIN_PASSWORD "WEB 管理密码"
 #define D_MQTT_ENABLE "启用 MQTT"
 #define D_MQTT_TLS_ENABLE "MQTT TLS"
@@ -376,15 +376,15 @@
 #define D_OTA_URL "OTA 地址"
 #define D_START_UPGRADE "开始升级"
 #define D_UPGRADE_BY_FILE_UPLOAD "通过文件升级"
-#define D_UPLOAD_FACTORY "Switching to safeboot partition"
+#define D_UPLOAD_FACTORY "切换到安全启动分区"
 #define D_UPLOAD_STARTED "开始上传"
 #define D_UPGRADE_STARTED "开始升级"
 #define D_UPLOAD_DONE "上传完成"
-#define D_UPLOAD_TRANSFER "Upload transfer"
-#define D_TRANSFER_STARTED "Transfer started"
+#define D_UPLOAD_TRANSFER "上传中"
+#define D_TRANSFER_STARTED "传输开始"
 #define D_UPLOAD_ERR_1 "没有选择任何文件"
 #define D_UPLOAD_ERR_2 "没有足够空间"
-#define D_UPLOAD_ERR_3 "Invalid file signature"
+#define D_UPLOAD_ERR_3 "无效的文件签名"
 #define D_UPLOAD_ERR_4 "固件大小超过 flash 容量"
 #define D_UPLOAD_ERR_5 "上传缓冲区不足，请先刷入精简固件再升级"
 #define D_UPLOAD_ERR_6 "上传失败。 启用日志级别 3 调试"
@@ -395,7 +395,7 @@
 #define D_UPLOAD_ERR_11 "擦除 RF 芯片失败"
 #define D_UPLOAD_ERR_12 "写入 RF 芯片失败"
 #define D_UPLOAD_ERR_13 "解码 RF 固件失败"
-#define D_UPLOAD_ERR_14 "Not compatible"
+#define D_UPLOAD_ERR_14 "不兼容"
 #define D_UPLOAD_ERROR_CODE "上传错误代码"
 
 #define D_ENTER_COMMAND "输入命令"
@@ -485,12 +485,12 @@
 
 // xdrv_23_zigbee
 #define D_ZIGBEE_PERMITJOIN_ACTIVE "允许设备连入"
-#define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee Mapping"
+#define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee 映射"
 #define D_ZIGBEE_NOT_STARTED "Zigbee 未启动"
-#define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "Mapping in progress (%d s. remaining)"
-#define D_ZIGBEE_MAPPING_NOT_PRESENT "No mapping"
-#define D_ZIGBEE_MAP_REFRESH "Zigbee Map Refresh"
-#define D_ZIGBEE_MAP   "Zigbee Map"
+#define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "正在处理中 (等待 %d s.)"
+#define D_ZIGBEE_MAPPING_NOT_PRESENT "无映射"
+#define D_ZIGBEE_MAP_REFRESH "Zigbee 映射刷新"
+#define D_ZIGBEE_MAP   "Zigbee 映射"
 #define D_ZIGBEE_PERMITJOIN "Zigbee 允许连入"
 #define D_ZIGBEE_GENERATE_KEY "正在生成 Zigbee 网络随机秘钥"
 #define D_ZIGBEE_UNKNOWN_DEVICE "未知设备"
@@ -941,8 +941,8 @@
 #define D_SENSOR_DETECTED      "detected"
 
 //SDM220, SDM120, SDM72, LE01MR, SDM230
-#define D_EXPORT_POWER    "Export Power"
-#define D_IMPORT_POWER 	  "Import Power"
+#define D_EXPORT_POWER    "输出功率"
+#define D_IMPORT_POWER 	  "输入功率"
 #define D_PHASE_ANGLE     "相位角"
 #define D_IMPORT_ACTIVE   "有功输入"
 #define D_EXPORT_ACTIVE   "有功输出"
@@ -951,7 +951,7 @@
 #define D_TOTAL_REACTIVE  "总无功功率"
 #define D_UNIT_KWARH      "千乏时"
 #define D_UNIT_ANGLE      "度"
-#define D_TOTAL_ACTIVE    "Total Active"
+#define D_TOTAL_ACTIVE    "总功率"
 #define D_RESETTABLE_TOTAL_ACTIVE    "Total Active (RST)"
 
 //SOLAXX1