From 701d33f645d70e46bb583e147aea120782d5e084 Mon Sep 17 00:00:00 2001 From: Theo Arends <11044339+arendst@users.noreply.github.com> Date: Wed, 23 Aug 2023 13:02:13 +0200 Subject: [PATCH] Phase 2 support C2/C6 --- lib/lib_display/UDisplay/uDisplay.h | 2 +- .../rfid-1.4.7/src/MFRC522Extended.cpp | 4 +- .../Adafruit_TSL2591.cpp | 4 +- .../Joba_Tsl2561-2.0.10/src/Tsl2561.cpp | 8 +- lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.h | 4 +- .../src/SensirionI2CCommunication.cpp | 20 +- .../src/SensirionI2CTxFrame.cpp | 6 +- .../Sensirion_Core/src/SensirionRxFrame.cpp | 12 +- .../src/SensirionShdlcCommunication.cpp | 18 +- .../src/SensirionShdlcTxFrame.cpp | 4 +- .../src/esp8266toEsp32.cpp | 16 +- .../src/esp8266toEsp32.h | 5 + .../HttpClientLight/src/TasUpdater.cpp | 4 + .../berry_mapping/src/be_class_wrapper.c | 2 +- .../ESP32-HomeKit/src/port/bignum.h | 2 +- .../ESP32-HomeKit/src/port/bignum_ESP32.c | 5 +- .../ESP32-HomeKit/src/port/bignum_ESP32_C3.c | 4 +- .../ESP32-HomeKit/src/port/bignum_ESP32_C3.h | 4 +- .../ESP32-HomeKit/src/port/bignum_impl.h | 4 +- .../ESP32-HomeKit/src/port/esp_bignum.c | 4 +- lib/libesp32_div/NimBLE-Arduino/library.json | 2 +- .../NimBLE-Arduino/src/NimBLEDevice.cpp | 2 +- .../NimBLE-Arduino/src/nimconfig.h | 2 +- .../.github/workflows/build.yml | 65 + lib/libesp32_div/esp-nimble-cpp/.gitignore | 1 + lib/libesp32_div/esp-nimble-cpp/CHANGELOG.md | 280 ++ .../esp-nimble-cpp/CMakeLists.txt | 64 + .../esp-nimble-cpp/CMakeLists.txt_idf3 | 56 + lib/libesp32_div/esp-nimble-cpp/Kconfig | 72 + lib/libesp32_div/esp-nimble-cpp/LICENSE | 203 ++ lib/libesp32_div/esp-nimble-cpp/README.md | 70 + lib/libesp32_div/esp-nimble-cpp/component.mk | 2 + .../docs/Bluetooth 5 features.md | 28 + lib/libesp32_div/esp-nimble-cpp/docs/Doxyfile | 2778 +++++++++++++++++ .../docs/Improvements_and_updates.md | 149 + .../esp-nimble-cpp/docs/Migration_guide.md | 432 +++ .../esp-nimble-cpp/docs/New_user_guide.md | 339 ++ .../esp-nimble-cpp/docs/Usage_tips.md | 41 + lib/libesp32_div/esp-nimble-cpp/docs/index.md | 58 + .../Advanced/NimBLE_Client/CMakeLists.txt | 7 + .../examples/Advanced/NimBLE_Client/Makefile | 3 + .../NimBLE_Client/main/CMakeLists.txt | 4 + .../Advanced/NimBLE_Client/main/component.mk | 4 + .../Advanced/NimBLE_Client/main/main.cpp | 370 +++ .../Advanced/NimBLE_Client/sdkconfig.defaults | 12 + .../Advanced/NimBLE_Server/CMakeLists.txt | 7 + .../examples/Advanced/NimBLE_Server/Makefile | 3 + .../NimBLE_Server/main/CMakeLists.txt | 4 + .../Advanced/NimBLE_Server/main/component.mk | 4 + .../Advanced/NimBLE_Server/main/main.cpp | 242 ++ .../Advanced/NimBLE_Server/sdkconfig.defaults | 12 + .../NimBLE_extended_client/CMakeLists.txt | 7 + .../NimBLE_extended_client/Makefile | 3 + .../main/CMakeLists.txt | 4 + .../NimBLE_extended_client/main/component.mk | 4 + .../NimBLE_extended_client/main/main.cpp | 163 + .../NimBLE_extended_client/sdkconfig.defaults | 13 + .../NimBLE_extended_server/CMakeLists.txt | 7 + .../NimBLE_extended_server/Makefile | 3 + .../main/CMakeLists.txt | 4 + .../NimBLE_extended_server/main/component.mk | 4 + .../NimBLE_extended_server/main/main.cpp | 139 + .../NimBLE_extended_server/sdkconfig.defaults | 13 + .../NimBLE_multi_advertiser/CMakeLists.txt | 7 + .../NimBLE_multi_advertiser/Makefile | 3 + .../main/CMakeLists.txt | 4 + .../NimBLE_multi_advertiser/main/component.mk | 4 + .../NimBLE_multi_advertiser/main/main.cpp | 170 + .../sdkconfig.defaults | 13 + .../NimBLE_active_passive_scan.ino | 48 + .../examples/basic/BLE_client/CMakeLists.txt | 7 + .../examples/basic/BLE_client/Makefile | 3 + .../basic/BLE_client/main/CMakeLists.txt | 4 + .../basic/BLE_client/main/component.mk | 4 + .../examples/basic/BLE_client/main/main.cpp | 203 ++ .../basic/BLE_client/sdkconfig.defaults | 12 + .../examples/basic/BLE_notify/CMakeLists.txt | 7 + .../examples/basic/BLE_notify/Makefile | 3 + .../basic/BLE_notify/main/CMakeLists.txt | 4 + .../basic/BLE_notify/main/component.mk | 4 + .../examples/basic/BLE_notify/main/main.cpp | 155 + .../basic/BLE_notify/sdkconfig.defaults | 12 + .../examples/basic/BLE_scan/CMakeLists.txt | 7 + .../examples/basic/BLE_scan/Makefile | 3 + .../basic/BLE_scan/main/CMakeLists.txt | 4 + .../examples/basic/BLE_scan/main/component.mk | 4 + .../examples/basic/BLE_scan/main/main.cpp | 52 + .../basic/BLE_scan/sdkconfig.defaults | 12 + .../examples/basic/BLE_server/CMakeLists.txt | 7 + .../examples/basic/BLE_server/Makefile | 3 + .../basic/BLE_server/main/CMakeLists.txt | 4 + .../basic/BLE_server/main/component.mk | 4 + .../examples/basic/BLE_server/main/main.cpp | 57 + .../basic/BLE_server/sdkconfig.defaults | 12 + .../examples/basic/BLE_uart/CMakeLists.txt | 7 + .../examples/basic/BLE_uart/Makefile | 3 + .../basic/BLE_uart/main/CMakeLists.txt | 4 + .../examples/basic/BLE_uart/main/component.mk | 4 + .../examples/basic/BLE_uart/main/main.cpp | 167 + .../basic/BLE_uart/sdkconfig.defaults | 12 + lib/libesp32_div/esp-nimble-cpp/library.json | 8 + .../esp-nimble-cpp/library.properties | 10 + .../esp-nimble-cpp/src/HIDKeyboardTypes.h | 402 +++ .../esp-nimble-cpp/src/HIDTypes.h | 91 + .../esp-nimble-cpp/src/NimBLE2904.cpp | 86 + .../esp-nimble-cpp/src/NimBLE2904.h | 83 + .../esp-nimble-cpp/src/NimBLEAddress.cpp | 197 ++ .../esp-nimble-cpp/src/NimBLEAddress.h | 62 + .../src/NimBLEAdvertisedDevice.cpp | 894 ++++++ .../src/NimBLEAdvertisedDevice.h | 181 ++ .../esp-nimble-cpp/src/NimBLEAdvertising.cpp | 1072 +++++++ .../esp-nimble-cpp/src/NimBLEAdvertising.h | 144 + .../esp-nimble-cpp/src/NimBLEAttValue.h | 447 +++ .../esp-nimble-cpp/src/NimBLEBeacon.cpp | 157 + .../esp-nimble-cpp/src/NimBLEBeacon.h | 51 + .../src/NimBLECharacteristic.cpp | 658 ++++ .../esp-nimble-cpp/src/NimBLECharacteristic.h | 213 ++ .../esp-nimble-cpp/src/NimBLEClient.cpp | 1277 ++++++++ .../esp-nimble-cpp/src/NimBLEClient.h | 167 + .../esp-nimble-cpp/src/NimBLEConnInfo.h | 58 + .../esp-nimble-cpp/src/NimBLEDescriptor.cpp | 307 ++ .../esp-nimble-cpp/src/NimBLEDescriptor.h | 120 + .../esp-nimble-cpp/src/NimBLEDevice.cpp | 1211 +++++++ .../esp-nimble-cpp/src/NimBLEDevice.h | 241 ++ .../esp-nimble-cpp/src/NimBLEEddystoneTLM.cpp | 227 ++ .../esp-nimble-cpp/src/NimBLEEddystoneTLM.h | 61 + .../esp-nimble-cpp/src/NimBLEEddystoneURL.cpp | 204 ++ .../esp-nimble-cpp/src/NimBLEEddystoneURL.h | 52 + .../src/NimBLEExtAdvertising.cpp | 870 ++++++ .../esp-nimble-cpp/src/NimBLEExtAdvertising.h | 152 + .../esp-nimble-cpp/src/NimBLEHIDDevice.cpp | 248 ++ .../esp-nimble-cpp/src/NimBLEHIDDevice.h | 86 + .../esp-nimble-cpp/src/NimBLELog.h | 80 + .../src/NimBLERemoteCharacteristic.cpp | 806 +++++ .../src/NimBLERemoteCharacteristic.h | 180 ++ .../src/NimBLERemoteDescriptor.cpp | 335 ++ .../src/NimBLERemoteDescriptor.h | 104 + .../src/NimBLERemoteService.cpp | 413 +++ .../esp-nimble-cpp/src/NimBLERemoteService.h | 85 + .../esp-nimble-cpp/src/NimBLEScan.cpp | 574 ++++ .../esp-nimble-cpp/src/NimBLEScan.h | 128 + .../esp-nimble-cpp/src/NimBLEServer.cpp | 868 +++++ .../esp-nimble-cpp/src/NimBLEServer.h | 176 ++ .../esp-nimble-cpp/src/NimBLEService.cpp | 437 +++ .../esp-nimble-cpp/src/NimBLEService.h | 87 + .../esp-nimble-cpp/src/NimBLEUUID.cpp | 360 +++ .../esp-nimble-cpp/src/NimBLEUUID.h | 64 + .../esp-nimble-cpp/src/NimBLEUtils.cpp | 518 +++ .../esp-nimble-cpp/src/NimBLEUtils.h | 51 + .../esp-nimble-cpp/src/nimconfig.h | 140 + .../esp-nimble-cpp/src/nimconfig_rename.h | 61 + .../lvgl/src/core/lv_obj_style.h | 2 +- tasmota/tasmota_support/support_esp.ino | 11 +- 153 files changed, 22293 insertions(+), 69 deletions(-) create mode 100644 lib/libesp32_div/esp-nimble-cpp/.github/workflows/build.yml create mode 100644 lib/libesp32_div/esp-nimble-cpp/.gitignore create mode 100644 lib/libesp32_div/esp-nimble-cpp/CHANGELOG.md create mode 100644 lib/libesp32_div/esp-nimble-cpp/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/CMakeLists.txt_idf3 create mode 100644 lib/libesp32_div/esp-nimble-cpp/Kconfig create mode 100644 lib/libesp32_div/esp-nimble-cpp/LICENSE create mode 100644 lib/libesp32_div/esp-nimble-cpp/README.md create mode 100644 lib/libesp32_div/esp-nimble-cpp/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/docs/Bluetooth 5 features.md create mode 100644 lib/libesp32_div/esp-nimble-cpp/docs/Doxyfile create mode 100644 lib/libesp32_div/esp-nimble-cpp/docs/Improvements_and_updates.md create mode 100644 lib/libesp32_div/esp-nimble-cpp/docs/Migration_guide.md create mode 100644 lib/libesp32_div/esp-nimble-cpp/docs/New_user_guide.md create mode 100644 lib/libesp32_div/esp-nimble-cpp/docs/Usage_tips.md create mode 100644 lib/libesp32_div/esp-nimble-cpp/docs/index.md create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Client/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Client/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Client/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Client/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Client/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Client/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Server/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Server/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Server/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Server/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Server/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Advanced/NimBLE_Server/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_client/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_client/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_client/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_client/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_client/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_client/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_server/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_server/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_server/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_server/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_server/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_extended_server/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_multi_advertiser/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_multi_advertiser/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_multi_advertiser/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_multi_advertiser/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_multi_advertiser/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/Bluetooth_5/NimBLE_multi_advertiser/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/NimBLE_active_passive_scan/NimBLE_active_passive_scan.ino create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_client/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_client/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_client/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_client/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_client/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_client/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_notify/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_notify/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_notify/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_notify/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_notify/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_notify/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_scan/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_scan/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_scan/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_scan/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_scan/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_scan/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_server/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_server/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_server/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_server/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_server/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_server/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_uart/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_uart/Makefile create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_uart/main/CMakeLists.txt create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_uart/main/component.mk create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_uart/main/main.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/examples/basic/BLE_uart/sdkconfig.defaults create mode 100644 lib/libesp32_div/esp-nimble-cpp/library.json create mode 100644 lib/libesp32_div/esp-nimble-cpp/library.properties create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/HIDKeyboardTypes.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/HIDTypes.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLE2904.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLE2904.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEAddress.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEAddress.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEAdvertisedDevice.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEAdvertisedDevice.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEAdvertising.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEAdvertising.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEAttValue.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEBeacon.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEBeacon.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLECharacteristic.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLECharacteristic.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEClient.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEClient.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEConnInfo.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEDescriptor.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEDescriptor.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEDevice.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEDevice.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEEddystoneTLM.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEEddystoneTLM.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEEddystoneURL.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEEddystoneURL.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEExtAdvertising.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEExtAdvertising.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEHIDDevice.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEHIDDevice.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLELog.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLERemoteCharacteristic.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLERemoteCharacteristic.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLERemoteDescriptor.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLERemoteDescriptor.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLERemoteService.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLERemoteService.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEScan.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEScan.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEServer.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEServer.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEService.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEService.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEUUID.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEUUID.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEUtils.cpp create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/NimBLEUtils.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/nimconfig.h create mode 100644 lib/libesp32_div/esp-nimble-cpp/src/nimconfig_rename.h diff --git a/lib/lib_display/UDisplay/uDisplay.h b/lib/lib_display/UDisplay/uDisplay.h index 2f11044f1..7ea6e57e6 100755 --- a/lib/lib_display/UDisplay/uDisplay.h +++ b/lib/lib_display/UDisplay/uDisplay.h @@ -89,7 +89,7 @@ enum uColorType { uCOLOR_BW, uCOLOR_COLOR }; #undef GPIO_CLR #undef GPIO_SET_SLOW #undef GPIO_CLR_SLOW -#if CONFIG_IDF_TARGET_ESP32C3 +#if CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 #define GPIO_CLR(A) GPIO.out_w1tc.val = (1 << A) #define GPIO_SET(A) GPIO.out_w1ts.val = (1 << A) #else // plain ESP32 diff --git a/lib/lib_div/rfid-1.4.7/src/MFRC522Extended.cpp b/lib/lib_div/rfid-1.4.7/src/MFRC522Extended.cpp index da603ab77..fcf030f9b 100644 --- a/lib/lib_div/rfid-1.4.7/src/MFRC522Extended.cpp +++ b/lib/lib_div/rfid-1.4.7/src/MFRC522Extended.cpp @@ -821,7 +821,7 @@ MFRC522::StatusCode MFRC522Extended::TCL_Transceive(TagInfo *tag, byte *sendData // Swap block number on success tag->blockNumber = !tag->blockNumber; - if (backData && (backLen > 0)) { + if (backData && (backLen != 0)) { if (*backLen < in.inf.size) return STATUS_NO_ROOM; @@ -844,7 +844,7 @@ MFRC522::StatusCode MFRC522Extended::TCL_Transceive(TagInfo *tag, byte *sendData if (result != STATUS_OK) return result; - if (backData && (backLen > 0)) { + if (backData && (backLen != 0)) { if ((*backLen + ackDataSize) > totalBackLen) return STATUS_NO_ROOM; diff --git a/lib/lib_i2c/Adafruit_TSL2591_Library/Adafruit_TSL2591.cpp b/lib/lib_i2c/Adafruit_TSL2591_Library/Adafruit_TSL2591.cpp index 1cd9a9de3..57a0a67a9 100644 --- a/lib/lib_i2c/Adafruit_TSL2591_Library/Adafruit_TSL2591.cpp +++ b/lib/lib_i2c/Adafruit_TSL2591_Library/Adafruit_TSL2591.cpp @@ -214,7 +214,7 @@ void Adafruit_TSL2591::setGain(tsl2591Gain_t gain) enable(); _gain = gain; - write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CONTROL, _integration | _gain); + write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CONTROL, static_cast(_integration) | static_cast(_gain)); disable(); } @@ -245,7 +245,7 @@ void Adafruit_TSL2591::setTiming(tsl2591IntegrationTime_t integration) enable(); _integration = integration; - write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CONTROL, _integration | _gain); + write8(TSL2591_COMMAND_BIT | TSL2591_REGISTER_CONTROL, static_cast(_integration) | static_cast(_gain)); disable(); } diff --git a/lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.cpp b/lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.cpp index f0e324eb8..a44a9cd32 100644 --- a/lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.cpp +++ b/lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.cpp @@ -47,7 +47,7 @@ bool Tsl2561::begin() { bool Tsl2561::readByte( register_t reg, uint8_t &val ) { _wire.beginTransmission(_addr); - _wire.write(reg | CONTROL_CMD); + _wire.write(reg | static_cast(CONTROL_CMD)); if( (_status = static_cast(_wire.endTransmission(false))) == ERR_OK ) { if( _wire.requestFrom(_addr, 1) == 1 ) { val = static_cast(_wire.read()); @@ -61,7 +61,7 @@ bool Tsl2561::readByte( register_t reg, uint8_t &val ) { bool Tsl2561::readWord( register_t reg, uint16_t &val ) { _wire.beginTransmission(_addr); - _wire.write(reg | CONTROL_CMD); + _wire.write(reg | static_cast(CONTROL_CMD)); if( (_status = static_cast(_wire.endTransmission(false))) == ERR_OK ) { if( _wire.requestFrom(_addr, 2) == 2 ) { val = static_cast(_wire.read()) & 0xff; @@ -76,7 +76,7 @@ bool Tsl2561::readWord( register_t reg, uint16_t &val ) { bool Tsl2561::writeByte( register_t reg, uint8_t val ) { _wire.beginTransmission(_addr); - _wire.write(reg | CONTROL_CMD); + _wire.write(reg | static_cast(CONTROL_CMD)); _wire.write(val); return (_status = static_cast(_wire.endTransmission())) == ERR_OK; } @@ -118,7 +118,7 @@ bool Tsl2561::off() { } bool Tsl2561::setSensitivity( bool gain, exposure_t exposure ) { - return writeByte(REG_TIMING, (gain ? GAIN_ON : GAIN_OFF) | exposure); + return writeByte(REG_TIMING, (gain ? GAIN_ON : GAIN_OFF) | static_cast(exposure)); } bool Tsl2561::getSensitivity( bool &gain, exposure_t &exposure ) diff --git a/lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.h b/lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.h index 147db2a77..84f86ee27 100644 --- a/lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.h +++ b/lib/lib_i2c/Joba_Tsl2561-2.0.10/src/Tsl2561.h @@ -42,7 +42,7 @@ public: ADDR_VDD = 0b1001001 } address_t; - typedef enum { + typedef enum : uint8_t { REG_CONTROL, // Control of basic functions REG_TIMING, // Integration time/gain control REG_THRESHLOWLOW, // Low byte of low interrupt threshold @@ -61,7 +61,7 @@ public: REG_DATA1HIGH // High byte of ADC channel 1 } register_t; - enum { + enum : uint8_t{ CONTROL_CMD = 0b10000000, CONTROL_CLEAR = 0b01000000, CONTROL_WORD = 0b00100000, // SPI only? diff --git a/lib/lib_i2c/Sensirion_Core/src/SensirionI2CCommunication.cpp b/lib/lib_i2c/Sensirion_Core/src/SensirionI2CCommunication.cpp index 2d8b7acab..b95502c47 100644 --- a/lib/lib_i2c/Sensirion_Core/src/SensirionI2CCommunication.cpp +++ b/lib/lib_i2c/Sensirion_Core/src/SensirionI2CCommunication.cpp @@ -52,7 +52,7 @@ uint16_t SensirionI2CCommunication::sendFrame(uint8_t address, size_t writtenBytes = i2cBus.write(frame._buffer, frame._index); uint8_t i2c_error = i2cBus.endTransmission(); if (writtenBytes != frame._index) { - return WriteError | I2cOtherError; + return static_cast(WriteError) | static_cast(I2cOtherError); } // translate Arduino errors, see // https://www.arduino.cc/en/Reference/WireEndTransmission @@ -60,13 +60,13 @@ uint16_t SensirionI2CCommunication::sendFrame(uint8_t address, case 0: return NoError; case 1: - return WriteError | InternalBufferSizeError; + return static_cast(WriteError) | static_cast(InternalBufferSizeError); case 2: - return WriteError | I2cAddressNack; + return static_cast(WriteError) | static_cast(I2cAddressNack); case 3: - return WriteError | I2cDataNack; + return static_cast(WriteError) | static_cast(I2cDataNack); default: - return WriteError | I2cOtherError; + return static_cast(WriteError) | static_cast(I2cOtherError); } } @@ -89,19 +89,19 @@ uint16_t SensirionI2CCommunication::receiveFrame(uint8_t address, #endif if (numBytes % 3) { - return ReadError | WrongNumberBytesError; + return static_cast(ReadError) | static_cast(WrongNumberBytesError); } if ((numBytes / 3) * 2 > frame._bufferSize) { - return ReadError | BufferSizeError; + return static_cast(ReadError) | static_cast(BufferSizeError); } if (numBytes > sizeBuffer) { - return ReadError | InternalBufferSizeError; + return static_cast(ReadError) | static_cast(InternalBufferSizeError); } readAmount = i2cBus.requestFrom(address, static_cast(numBytes), static_cast(true)); if (numBytes != readAmount) { - return ReadError | NotEnoughDataError; + return static_cast(ReadError) | static_cast(NotEnoughDataError); } do { frame._buffer[i++] = i2cBus.read(); @@ -110,7 +110,7 @@ uint16_t SensirionI2CCommunication::receiveFrame(uint8_t address, uint8_t expectedCRC = generateCRC(&frame._buffer[i - 2], 2, poly); if (actualCRC != expectedCRC) { clearRxBuffer(i2cBus); - return ReadError | CRCError; + return static_cast(ReadError) | static_cast(CRCError); } readAmount -= 3; } while (readAmount > 0); diff --git a/lib/lib_i2c/Sensirion_Core/src/SensirionI2CTxFrame.cpp b/lib/lib_i2c/Sensirion_Core/src/SensirionI2CTxFrame.cpp index 67999f86c..301fafaf5 100644 --- a/lib/lib_i2c/Sensirion_Core/src/SensirionI2CTxFrame.cpp +++ b/lib/lib_i2c/Sensirion_Core/src/SensirionI2CTxFrame.cpp @@ -68,7 +68,7 @@ SensirionI2CTxFrame SensirionI2CTxFrame::createWithUInt16Command( uint16_t SensirionI2CTxFrame::addCommand(uint16_t command) { if (_bufferSize < 2) { - return TxFrameError | BufferSizeError; + return static_cast(TxFrameError) | static_cast(BufferSizeError); } _buffer[0] = static_cast((command & 0xFF00) >> 8); _buffer[1] = static_cast((command & 0x00FF) >> 0); @@ -130,12 +130,12 @@ uint16_t SensirionI2CTxFrame::addBytes(const uint8_t data[], uint16_t SensirionI2CTxFrame::_addByte(uint8_t data) { if (_bufferSize <= _index) { - return TxFrameError | BufferSizeError; + return static_cast(TxFrameError) | static_cast(BufferSizeError); } _buffer[_index++] = data; if ((_index - _numCommandBytes) % 3 == 2) { if (_bufferSize <= _index) { - return TxFrameError | BufferSizeError; + return static_cast(TxFrameError) | static_cast(BufferSizeError); } uint8_t crc = generateCRC(&_buffer[_index - 2], 2, _polynomial_type); _buffer[_index++] = crc; diff --git a/lib/lib_i2c/Sensirion_Core/src/SensirionRxFrame.cpp b/lib/lib_i2c/Sensirion_Core/src/SensirionRxFrame.cpp index c653c250d..e89a0b86b 100644 --- a/lib/lib_i2c/Sensirion_Core/src/SensirionRxFrame.cpp +++ b/lib/lib_i2c/Sensirion_Core/src/SensirionRxFrame.cpp @@ -42,7 +42,7 @@ SensirionRxFrame::SensirionRxFrame(uint8_t buffer[], size_t bufferSize) uint16_t SensirionRxFrame::getUInt32(uint32_t& data) { if (_numBytes < 4) { - return RxFrameError | NoDataError; + return static_cast(RxFrameError) | static_cast(NoDataError); } data = static_cast(_buffer[_index++]) << 24; data |= static_cast(_buffer[_index++]) << 16; @@ -61,7 +61,7 @@ uint16_t SensirionRxFrame::getInt32(int32_t& data) { uint16_t SensirionRxFrame::getUInt16(uint16_t& data) { if (_numBytes < 2) { - return RxFrameError | NoDataError; + return static_cast(RxFrameError) | static_cast(NoDataError); } data = static_cast(_buffer[_index++]) << 8; data |= static_cast(_buffer[_index++]); @@ -78,7 +78,7 @@ uint16_t SensirionRxFrame::getInt16(int16_t& data) { uint16_t SensirionRxFrame::getUInt8(uint8_t& data) { if (_numBytes < 1) { - return RxFrameError | NoDataError; + return static_cast(RxFrameError) | static_cast(NoDataError); } data = _buffer[_index++]; _numBytes -= 1; @@ -87,7 +87,7 @@ uint16_t SensirionRxFrame::getUInt8(uint8_t& data) { uint16_t SensirionRxFrame::getInt8(int8_t& data) { if (_numBytes < 1) { - return RxFrameError | NoDataError; + return static_cast(RxFrameError) | static_cast(NoDataError); } data = static_cast(_buffer[_index++]); _numBytes -= 1; @@ -96,7 +96,7 @@ uint16_t SensirionRxFrame::getInt8(int8_t& data) { uint16_t SensirionRxFrame::getBool(bool& data) { if (_numBytes < 1) { - return RxFrameError | NoDataError; + return static_cast(RxFrameError) | static_cast(NoDataError); } data = static_cast(_buffer[_index++]); _numBytes -= 1; @@ -115,7 +115,7 @@ uint16_t SensirionRxFrame::getFloat(float& data) { uint16_t SensirionRxFrame::getBytes(uint8_t data[], size_t maxBytes) { if (_numBytes < 1) { - return RxFrameError | NoDataError; + return static_cast(RxFrameError) | static_cast(NoDataError); } size_t readAmount = maxBytes; if (_numBytes < maxBytes) { diff --git a/lib/lib_i2c/Sensirion_Core/src/SensirionShdlcCommunication.cpp b/lib/lib_i2c/Sensirion_Core/src/SensirionShdlcCommunication.cpp index 300546ee8..ce9155e50 100644 --- a/lib/lib_i2c/Sensirion_Core/src/SensirionShdlcCommunication.cpp +++ b/lib/lib_i2c/Sensirion_Core/src/SensirionShdlcCommunication.cpp @@ -42,7 +42,7 @@ static uint16_t readByte(uint8_t& data, Stream& serial, unsigned long startTime, unsigned long timeoutMicros) { do { if (micros() - startTime > timeoutMicros) { - return ReadError | TimeoutError; + return static_cast(ReadError) | static_cast(TimeoutError); } } while (!serial.available()); data = serial.read(); @@ -70,7 +70,7 @@ uint16_t SensirionShdlcCommunication::sendFrame(SensirionShdlcTxFrame& frame, Stream& serial) { size_t writtenBytes = serial.write(&frame._buffer[0], frame._index); if (writtenBytes != frame._index) { - return WriteError | SerialWriteError; + return static_cast(WriteError) | static_cast(SerialWriteError); } return NoError; } @@ -83,7 +83,7 @@ uint16_t SensirionShdlcCommunication::receiveFrame( uint8_t current = 0; if (frame._numBytes) { - return ReadError | NonemptyFrameError; + return static_cast(ReadError) | static_cast(NonemptyFrameError); } // Wait for start byte and ignore all other bytes in case a partial frame @@ -121,7 +121,7 @@ uint16_t SensirionShdlcCommunication::receiveFrame( frame._address + frame._command + frame._state + dataLength; if (dataLength > frame._bufferSize) { - return RxFrameError | BufferSizeError; + return static_cast(RxFrameError) | static_cast(BufferSizeError); } size_t i = 0; @@ -142,7 +142,7 @@ uint16_t SensirionShdlcCommunication::receiveFrame( return error; } if (expectedChecksum != actualChecksum) { - return ReadError | ChecksumError; + return static_cast(ReadError) | static_cast(ChecksumError); } uint8_t stop; @@ -151,10 +151,10 @@ uint16_t SensirionShdlcCommunication::receiveFrame( return error; } if (stop != 0x7e) { - return ReadError | StopByteError; + return static_cast(ReadError) | static_cast(StopByteError); } if (frame._state & 0x7F) { - return ExecutionError | frame._state; + return static_cast(ExecutionError) | frame._state; } frame._dataLength = dataLength; frame._numBytes = dataLength; @@ -175,10 +175,10 @@ uint16_t SensirionShdlcCommunication::sendAndReceiveFrame( return error; } if (rxFrame.getCommand() != txFrame.getCommand()) { - return RxFrameError | RxCommandError; + return static_cast(RxFrameError) | static_cast(RxCommandError); } if (rxFrame.getAddress() != txFrame.getAddress()) { - return RxFrameError | RxAddressError; + return static_cast(RxFrameError) | static_cast(RxAddressError); } return NoError; } diff --git a/lib/lib_i2c/Sensirion_Core/src/SensirionShdlcTxFrame.cpp b/lib/lib_i2c/Sensirion_Core/src/SensirionShdlcTxFrame.cpp index fc8c4c994..9efc5d824 100644 --- a/lib/lib_i2c/Sensirion_Core/src/SensirionShdlcTxFrame.cpp +++ b/lib/lib_i2c/Sensirion_Core/src/SensirionShdlcTxFrame.cpp @@ -53,7 +53,7 @@ uint16_t SensirionShdlcTxFrame::finish(void) { return error; } if (_index + 1 > _bufferSize) { - return TxFrameError | BufferSizeError; + return static_cast(TxFrameError) | BufferSizeError; } _buffer[_index++] = 0x7e; _isFinished = true; @@ -84,7 +84,7 @@ uint16_t SensirionShdlcTxFrame::addInt16(int16_t data) { uint16_t SensirionShdlcTxFrame::addUInt8(uint8_t data) { if (_index + 2 > _bufferSize) { - return TxFrameError | BufferSizeError; + return static_cast(TxFrameError) | BufferSizeError; } switch (data) { case 0x11: diff --git a/lib/libesp32/ESP32-to-ESP8266-compat/src/esp8266toEsp32.cpp b/lib/libesp32/ESP32-to-ESP8266-compat/src/esp8266toEsp32.cpp index c886a666d..d31aaed2b 100644 --- a/lib/libesp32/ESP32-to-ESP8266-compat/src/esp8266toEsp32.cpp +++ b/lib/libesp32/ESP32-to-ESP8266-compat/src/esp8266toEsp32.cpp @@ -48,16 +48,14 @@ enum LoggingLevels {LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_D // replicated from `tasmota.h` -#if defined(CONFIG_IDF_TARGET_ESP32) - const uint8_t MAX_PWMS = 16; // ESP32: 16 ledc PWM channels in total - TODO for now -#elif defined(CONFIG_IDF_TARGET_ESP32S2) - const uint8_t MAX_PWMS = 8; // ESP32S2: 8 ledc PWM channels in total -#elif defined(CONFIG_IDF_TARGET_ESP32S3) - const uint8_t MAX_PWMS = 8; // ESP32S2: 8 ledc PWM channels in total -#elif defined(CONFIG_IDF_TARGET_ESP32C3) - const uint8_t MAX_PWMS = 6; // ESP32C3: 6 ledc PWM channels in total +#if CONFIG_IDF_TARGET_ESP32 +const uint8_t MAX_PWMS = 16; // ESP32: 16 ledc PWM channels in total - TODO for now +#elif CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3 +const uint8_t MAX_PWMS = 8; // ESP32S2/S3: 8 ledc PWM channels in total +#elif CONFIG_IDF_TARGET_ESP32C2 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 +const uint8_t MAX_PWMS = 6; // ESP32C2/C3/C6: 6 ledc PWM channels in total #else - const uint8_t MAX_PWMS = 5; // Unknown - revert to 5 PWM max +const uint8_t MAX_PWMS = 5; // Unknown - revert to 5 PWM max #endif // current configuration of timers: frequency and resolution diff --git a/lib/libesp32/ESP32-to-ESP8266-compat/src/esp8266toEsp32.h b/lib/libesp32/ESP32-to-ESP8266-compat/src/esp8266toEsp32.h index 07bc9c2d5..8cae8d499 100644 --- a/lib/libesp32/ESP32-to-ESP8266-compat/src/esp8266toEsp32.h +++ b/lib/libesp32/ESP32-to-ESP8266-compat/src/esp8266toEsp32.h @@ -126,7 +126,12 @@ uint32_t analogGetTimerFrequency(uint8_t timer); #define ESPhttpUpdate httpUpdate +#if ESP_IDF_VERSION_MAJOR >= 5 +#include "rom/ets_sys.h" +#else #define os_delay_us ets_delay_us +#endif + // Serial minimal type to hold the config typedef int SerConfu8; //typedef int SerialConfig; // Will be replaced enum in esp32_hal-uart.h (#7926) diff --git a/lib/libesp32/HttpClientLight/src/TasUpdater.cpp b/lib/libesp32/HttpClientLight/src/TasUpdater.cpp index e359ff96f..d69463515 100644 --- a/lib/libesp32/HttpClientLight/src/TasUpdater.cpp +++ b/lib/libesp32/HttpClientLight/src/TasUpdater.cpp @@ -1,6 +1,10 @@ #include "TasUpdate.h" #include "Arduino.h" +#if ESP_IDF_VERSION_MAJOR >= 5 +#include "spi_flash_mmap.h" +#else #include "esp_spi_flash.h" +#endif #include "esp_ota_ops.h" #include "esp_image_format.h" diff --git a/lib/libesp32/berry_mapping/src/be_class_wrapper.c b/lib/libesp32/berry_mapping/src/be_class_wrapper.c index 71c29eff9..94cbb9f51 100644 --- a/lib/libesp32/berry_mapping/src/be_class_wrapper.c +++ b/lib/libesp32/berry_mapping/src/be_class_wrapper.c @@ -360,7 +360,7 @@ int be_check_arg_type(bvm *vm, int arg_start, int argc, const char * arg_type, i } } // berry_log_C(">> be_call_c_func arg %i, type %s", i, arg_type_check ? type_short_name : ""); - p[p_idx] = be_convert_single_elt(vm, i + arg_start, arg_type_check ? type_short_name : NULL, &buf_len); + p[p_idx] = be_convert_single_elt(vm, i + arg_start, arg_type_check ? type_short_name : NULL, (int*)&buf_len); // berry_log_C("< ret[%i]=%i", p_idx, p[p_idx]); p_idx++; diff --git a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum.h b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum.h index 158c22cb1..51394c66f 100644 --- a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum.h +++ b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum.h @@ -15,6 +15,6 @@ #if CONFIG_IDF_TARGET_ESP32 #include "bignum_ESP32.h" -#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3 +#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32S3 #include "bignum_ESP32_C3.h" #endif diff --git a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32.c b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32.c index d21b44a80..9e7158fe6 100644 --- a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32.c +++ b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32.c @@ -38,7 +38,10 @@ #include #if CONFIG_IDF_TARGET_ESP32C3 #include "esp32c3/dport_access.h" -#endif +#endif +#if CONFIG_IDF_TARGET_ESP32C6 +#include "esp32c6/dport_access.h" +#endif #if CONFIG_IDF_TARGET_ESP32S3 #include "esp32s3/dport_access.h" #endif diff --git a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32_C3.c b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32_C3.c index 1c579005f..5cd600d69 100644 --- a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32_C3.c +++ b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32_C3.c @@ -21,7 +21,7 @@ * */ -#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3 +#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32S3 #if __has_include("esp_idf_version.h") #include "esp_idf_version.h" #endif @@ -105,4 +105,4 @@ static inline void wait_op_complete(void) REG_WRITE(RSA_CLEAR_INTERRUPT_REG, 1); } -#endif //CONFIG_IDF_TARGET_ESP32C3 +#endif // CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32S3 diff --git a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32_C3.h b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32_C3.h index e664dd779..dd87e0463 100644 --- a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32_C3.h +++ b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_ESP32_C3.h @@ -11,7 +11,7 @@ // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. // See the License for the specific language governing permissions and // limitations under the License. -#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3 +#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32S3 #pragma once #include_next "mbedtls/bignum.h" @@ -84,4 +84,4 @@ void esp_mpi_mul_mpi_hw_op(const mbedtls_mpi *X, const mbedtls_mpi *Y, size_t nu //#endif // CONFIG_MBEDTLS_HARDWARE_MPI -#endif //CONFIG_IDF_TARGET_ESP32C3 +#endif // CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6|| CONFIG_IDF_TARGET_ESP32S3 diff --git a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_impl.h b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_impl.h index 1b1fa8e56..bf98c0074 100644 --- a/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_impl.h +++ b/lib/libesp32_div/ESP32-HomeKit/src/port/bignum_impl.h @@ -89,7 +89,7 @@ void esp_mpi_exp_mpi_mod_hw_op(const mbedtls_mpi *X, const mbedtls_mpi *Y, const #endif //CONFIG_IDF_TARGET_ESP32 #endif //ESP_MPI_USE_MONT_EXP -#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32S3 +#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32S3 void esp_mpi_exp_mpi_mod_hw_op(const mbedtls_mpi *X, const mbedtls_mpi *Y, const mbedtls_mpi *M, const mbedtls_mpi *Rinv, mbedtls_mpi_uint Mprime, size_t num_words); extern int esp_mpi_exp_mod( mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, const mbedtls_mpi *M, mbedtls_mpi *_Rinv ); extern size_t esp_mpi_hardware_words(size_t words); @@ -97,6 +97,6 @@ extern void esp_mpi_enable_hardware_hw_op( void ); extern void esp_mpi_disable_hardware_hw_op( void ); extern void esp_mpi_read_result_hw_op(mbedtls_mpi *Z, size_t z_words); extern void esp_mpi_mult_mpi_failover_mod_mult_hw_op(const mbedtls_mpi *X, const mbedtls_mpi *Y, size_t num_words); -#endif //CONFIG_IDF_TARGET_ESP32C3 +#endif // CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 || CONFIG_IDF_TARGET_ESP32S3 #endif diff --git a/lib/libesp32_div/ESP32-HomeKit/src/port/esp_bignum.c b/lib/libesp32_div/ESP32-HomeKit/src/port/esp_bignum.c index 5b8e124ce..0dbc34314 100644 --- a/lib/libesp32_div/ESP32-HomeKit/src/port/esp_bignum.c +++ b/lib/libesp32_div/ESP32-HomeKit/src/port/esp_bignum.c @@ -79,7 +79,7 @@ static inline size_t bits_to_words(size_t bits) /* Return the number of words actually used to represent an mpi number. */ -#if defined(MBEDTLS_MPI_EXP_MOD_ALT) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S3) +#if defined(MBEDTLS_MPI_EXP_MOD_ALT) || defined(CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32C6) || defined(CONFIG_IDF_TARGET_ESP32S3) static size_t mpi_words(const mbedtls_mpi *mpi) { for (size_t i = mpi->n; i > 0; i--) { @@ -369,7 +369,7 @@ cleanup: #endif /* MBEDTLS_MPI_EXP_MOD_ALT */ -#if CONFIG_IDF_TARGET_ESP32C3 +#if CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 int esp_mpi_exp_mod( mbedtls_mpi *Z, const mbedtls_mpi *X, const mbedtls_mpi *Y, const mbedtls_mpi *M, mbedtls_mpi *_Rinv ) { int ret = 0; diff --git a/lib/libesp32_div/NimBLE-Arduino/library.json b/lib/libesp32_div/NimBLE-Arduino/library.json index 348f77d3d..1f55748d6 100644 --- a/lib/libesp32_div/NimBLE-Arduino/library.json +++ b/lib/libesp32_div/NimBLE-Arduino/library.json @@ -2,7 +2,7 @@ "name": "NimBLE-Arduino", "keywords": "esp32, bluetooth", "description": "Bluetooth low energy (BLE) library for arduino-esp32 based on NimBLE", - "version": "1.4.0", + "version": "1.4.1", "frameworks": "arduino", "platforms": "espressif32" } diff --git a/lib/libesp32_div/NimBLE-Arduino/src/NimBLEDevice.cpp b/lib/libesp32_div/NimBLE-Arduino/src/NimBLEDevice.cpp index 43ba21909..d2553b0e8 100644 --- a/lib/libesp32_div/NimBLE-Arduino/src/NimBLEDevice.cpp +++ b/lib/libesp32_div/NimBLE-Arduino/src/NimBLEDevice.cpp @@ -867,7 +867,7 @@ void NimBLEDevice::init(const std::string &deviceName) { esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT); esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT(); -#if defined (CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32S3) +#if defined (CONFIG_IDF_TARGET_ESP32C3) || defined(CONFIG_IDF_TARGET_ESP32C6) || defined(CONFIG_IDF_TARGET_ESP32S3) bt_cfg.bluetooth_mode = ESP_BT_MODE_BLE; #else bt_cfg.mode = ESP_BT_MODE_BLE; diff --git a/lib/libesp32_div/NimBLE-Arduino/src/nimconfig.h b/lib/libesp32_div/NimBLE-Arduino/src/nimconfig.h index 8214e1d9b..945ce042c 100644 --- a/lib/libesp32_div/NimBLE-Arduino/src/nimconfig.h +++ b/lib/libesp32_div/NimBLE-Arduino/src/nimconfig.h @@ -284,7 +284,7 @@ #define CONFIG_BTDM_SCAN_DUPL_TYPE_DATA_DEVICE 2 #endif -#if !defined(CONFIG_IDF_TARGET_ESP32) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32S3) +#if !defined(CONFIG_IDF_TARGET_ESP32) && !defined(CONFIG_IDF_TARGET_ESP32C3) && !defined(CONFIG_IDF_TARGET_ESP32C6) && !defined(CONFIG_IDF_TARGET_ESP32S3) #define CONFIG_IDF_TARGET_ESP32 1 #endif diff --git a/lib/libesp32_div/esp-nimble-cpp/.github/workflows/build.yml b/lib/libesp32_div/esp-nimble-cpp/.github/workflows/build.yml new file mode 100644 index 000000000..f256daaff --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/.github/workflows/build.yml @@ -0,0 +1,65 @@ +name: Build + +on: + workflow_dispatch: # Start a workflow + pull_request: + push: + +jobs: + build-esp-idf-component: + name: Build with ESP-IDF ${{ matrix.idf_ver }} for ${{ matrix.idf_target }} + runs-on: ubuntu-latest + strategy: + matrix: + # The version names here correspond to the versions of espressif/idf Docker image. + # See https://hub.docker.com/r/espressif/idf/tags and + # https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-docker-image.html + # for details. + idf_ver: ["release-v4.4", "release-v5.1"] + idf_target: ["esp32", "esp32s3", "esp32c2", "esp32c3", "esp32c6"] + example: + - Advanced/NimBLE_Client + - Advanced/NimBLE_Server + - basic/BLE_client + - basic/BLE_notify + - basic/BLE_scan + - basic/BLE_server + - basic/BLE_uart + - Bluetooth_5/NimBLE_extended_client + - Bluetooth_5/NimBLE_extended_server + - Bluetooth_5/NimBLE_multi_advertiser + exclude: + - idf_target: "esp32" + example: Bluetooth_5/NimBLE_extended_client + - idf_target: "esp32" + example: Bluetooth_5/NimBLE_extended_server + - idf_target: "esp32" + example: Bluetooth_5/NimBLE_multi_advertiser + - idf_ver: release-v4.4 + idf_target: "esp32c2" + - idf_ver: release-v4.4 + idf_target: "esp32c6" + + container: espressif/idf:${{ matrix.idf_ver }} + steps: + - name: Checkout + uses: actions/checkout@v3 + with: + path: components/esp-nimble-cpp + - name: Build examples + env: + IDF_TARGET: ${{ matrix.idf_target }} + shell: bash + run: | + . ${IDF_PATH}/export.sh + cp -r components/esp-nimble-cpp/examples/* . + idf.py -C ${{ matrix.example }} -DEXTRA_COMPONENT_DIRS=$PWD/components build + + build_docs: + runs-on: ubuntu-latest + steps: + - uses: actions/checkout@v3 + - name: Doxygen Action + uses: mattnotmitt/doxygen-action@v1.9.5 + with: + working-directory: 'docs/' diff --git a/lib/libesp32_div/esp-nimble-cpp/.gitignore b/lib/libesp32_div/esp-nimble-cpp/.gitignore new file mode 100644 index 000000000..343d1f417 --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/.gitignore @@ -0,0 +1 @@ +docs/doxydocs \ No newline at end of file diff --git a/lib/libesp32_div/esp-nimble-cpp/CHANGELOG.md b/lib/libesp32_div/esp-nimble-cpp/CHANGELOG.md new file mode 100644 index 000000000..f8b6e42cb --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/CHANGELOG.md @@ -0,0 +1,280 @@ +# Changelog + +All notable changes to this project will be documented in this file. +## [Unreleased] + +### Changed +- NimBLESecurity class removed. + +### Added +- `NimBLEDevice::setDeviceName` to change the device name after initialization. +- `NimBLEHIDDevice::batteryLevel` returns the HID device battery level characteristic. + +## [1.4.0] - 2022-07-31 + +### Fixed +- Fixed missing data from long notification values. +- Fixed NimbleCharacteristicCallbacks::onRead not being called when a non-long read command is received. +- Prevent a potential crash when retrieving characteristics from a service if the result was successful but no characteristics found. +- logs/typos. + +### Changed +- AD flags are no longer set in the advertisements of non-connectable beacons, freeing up 3 bytes of advertisement room. +- Save resources when retrieving descriptors if the characteristic handle is the same as the end handle (no descriptors). +- Subscribing to characteristic notifications/indications will now always use write with response, as per BLE specifications. +- `NimBLEClient::discoverAttributes` now returns a bool value to indicate success/failure. +- Scan result callbacks are no longer called when the scan response data is updated in order to reduce duplicates. + +### Added +- Preliminary support for non-esp devices, NRF51 and NRF52 devices supported with [n-able arduino core](https://github.com/h2zero/n-able-Arduino) +- Alias added for `NimBLEServerCallbacks::onMTUChange` to `onMtuChanged` in order to support porting code from original library. +- `NimBLEAttValue` Class added to reduce and control RAM footprint of characteristic/descriptor values and support conversions from Arduino Strings and many other data types. +- Bluetooth 5 extended advertising support for capable devices. CODED Phy, 2M Phy, extended advertising data, and multi-advertising are supported, periodic advertising will be implemented in the future. + +## [1.3.3] - 2022-02-15 + +### Changed +- If attribute retrieval fails with a "not found" try again with the 16 bit version if a 128 bit base uuid is used. + +### Fixed +- Memory leak when deleting client instance. +- IDf version check for data length extension. +- Memory leak when server services changed. +- Compiler warnings for non-esp32 devices. + +## [1.3.2] - 2022-01-15 + +### Fixed +- Initialize advertising complete callback in NimBLEAdvertising constructor. +- Clear client disconnect timer in constructor before initializing. +- Fix missing data when reading large values. +- Fix missing data in notifications when using a large MTU size and more than 270 bytes of data are sent. +- Workaround fix added for cases when the task notification value is not cleared, causing various functions that should block not to block. + +### Added +- `NimBLEClient::getLastError` : Gets the error code of the last function call that produces a return code from the stack. +- `NimBLECharacteristic::notify` : Overload method to send notifications/indications with custom values. +- Added conditional checks for ESP32 specific functions/values to support use of the library on non-esp32 devices. +- Added an alias to use the callback name from the original library `onMtuChanged`. +- `NimBLEClient::setDataLen` and `NimBLEServer::setDataLen`: Data length extension support (IDF version >= 4.3.2 only) +- Config option to set logging level for esp-nimble-cpp + +### Changed +- Critical section calls now use the NimBLE API instead of FreeRTOS directly. This removes the need for a `portMUX_TYPE` variable in the class definitions. +- Removed unnecessary variables in `NimBLEService` and changed the constructor no no longer accept `numHandles` and `inst_id` parameters. + +## [1.3.1] - 2021-08-04 + +### Fixed +- Corrected a compiler/linker error when an application or a library uses bluetooth classic due to the redefinition of `btInUse`. + +## [1.3.0] - 2021-08-02 + +### Added +- `NimBLECharacteristic::removeDescriptor`: Dynamically remove a descriptor from a characterisic. Takes effect after all connections are closed and sends a service changed indication. +- `NimBLEService::removeCharacteristic`: Dynamically remove a characteristic from a service. Takes effect after all connections are closed and sends a service changed indication +- `NimBLEServerCallbacks::onMTUChange`: This is callback is called when the MTU is updated after connection with a client. +- ESP32C3 support + +- Whitelist API: + - `NimBLEDevice::whiteListAdd`: Add a device to the whitelist. + - `NimBLEDevice::whiteListRemove`: Remove a device from the whitelist. + - `NimBLEDevice::onWhiteList`: Check if the device is on the whitelist. + - `NimBLEDevice::getWhiteListCount`: Gets the size of the whitelist + - `NimBLEDevice::getWhiteListAddress`: Get the address of a device on the whitelist by index value. + +- Bond management API: + - `NimBLEDevice::getNumBonds`: Gets the number of bonds stored. + - `NimBLEDevice::isBonded`: Checks if the device is bonded. + - `NimBLEDevice::deleteAllBonds`: Deletes all bonds. + - `NimBLEDevice::getBondedAddress`: Gets the address of a bonded device by the index value. + +- `NimBLECharacteristic::getCallbacks` to retrieve the current callback handler. +- Connection Information class: `NimBLEConnInfo`. +- `NimBLEScan::clearDuplicateCache`: This can be used to reset the cache of advertised devices so they will be immediately discovered again. + +### Changed +- FreeRTOS files have been removed as they are not used by the library. +- Services, characteristics and descriptors can now be created statically and added after. +- Excess logging and some asserts removed. +- Use ESP_LOGx macros to enable using local log level filtering. + +### Fixed +- `NimBLECharacteristicCallbacks::onSubscribe` Is now called after the connection is added to the vector. +- Corrected bonding failure when reinitializing the BLE stack. +- Writing to a characterisic with a std::string value now correctly writes values with null characters. +- Retrieving remote descriptors now uses the characterisic end handle correctly. +- Missing data in long writes to remote descriptors. +- Hanging on task notification when sending an indication from the characteristic callback. +- BLE controller memory could be released when using Arduino as a component. +- Complile errors with NimBLE release 1.3.0. + +## [1.2.0] - 2021-02-08 + +### Added +- `NimBLECharacteristic::getDescriptorByHandle`: Return the BLE Descriptor for the given handle. + +- `NimBLEDescriptor::getStringValue`: Get the value of this descriptor as a string. + +- `NimBLEServer::getServiceByHandle`: Get a service by its handle. + +- `NimBLEService::getCharacteristicByHandle`: Get a pointer to the characteristic object with the specified handle. + +- `NimBLEService::getCharacteristics`: Get the vector containing pointers to each characteristic associated with this service. +Overloads to get a vector containing pointers to all the characteristics in a service with the UUID. (supports multiple same UUID's in a service) + - `NimBLEService::getCharacteristics(const char *uuid)` + - `NimBLEService::getCharacteristics(const NimBLEUUID &uuid)` + +- `NimBLEAdvertisementData` New methods: + - `NimBLEAdvertisementData::addTxPower`: Adds transmission power to the advertisement. + - `NimBLEAdvertisementData::setPreferredParams`: Adds connection parameters to the advertisement. + - `NimBLEAdvertisementData::setURI`: Adds URI data to the advertisement. + +- `NimBLEAdvertising` New methods: + - `NimBLEAdvertising::setName`: Set the name advertised. + - `NimBLEAdvertising::setManufacturerData`: Adds manufacturer data to the advertisement. + - `NimBLEAdvertising::setURI`: Adds URI data to the advertisement. + - `NimBLEAdvertising::setServiceData`: Adds service data to the advertisement. + - `NimBLEAdvertising::addTxPower`: Adds transmission power to the advertisement. + - `NimBLEAdvertising::reset`: Stops the current advertising and resets the advertising data to the default values. + +- `NimBLEDevice::setScanFilterMode`: Set the controller duplicate filter mode for filtering scanned devices. + +- `NimBLEDevice::setScanDuplicateCacheSize`: Sets the number of advertisements filtered before the cache is reset. + +- `NimBLEScan::setMaxResults`: This allows for setting a maximum number of advertised devices stored in the results vector. + +- `NimBLEAdvertisedDevice` New data retrieval methods added: + - `haveAdvInterval/getAdvInterval`: checks if the interval is advertised / gets the advertisement interval value. + + - `haveConnParams/getMinInterval/getMaxInterval`: checks if the parameters are advertised / get min value / get max value. + + - `haveURI/getURI`: checks if a URI is advertised / gets the URI data. + + - `haveTargetAddress/getTargetAddressCount/getTargetAddress(index)`: checks if a target address is present / gets a count of the addresses targeted / gets the address of the target at index. + +### Changed +- `nimconfig.h` (Arduino) is now easier to use. + +- `NimBLEServer::getServiceByUUID` Now takes an extra parameter of instanceID to support multiple services with the same UUID. + +- `NimBLEService::getCharacteristic` Now takes an extra parameter of instanceID to support multiple characteristics with the same UUID. + +- `NimBLEAdvertising` Transmission power is no longer advertised by default and can be added to the advertisement by calling `NimBLEAdvertising::addTxPower` + +- `NimBLEAdvertising` Custom scan response data can now be used without custom advertisment. + +- `NimBLEScan` Now uses the controller duplicate filter. + +- `NimBLEAdvertisedDevice` Has been refactored to store the complete advertisement payload and no longer parses the data from each advertisement. +Instead the data will be parsed on-demand when the user application asks for specific data. + +### Fixed +- `NimBLEHIDDevice` Characteristics now use encryption, this resolves an issue with communicating with devices requiring encryption for HID devices. + + +## [1.1.0] - 2021-01-20 + +### Added +- `NimBLEDevice::setOwnAddrType` added to enable the use of random and random-resolvable addresses, by asukiaaa + +- New examples for securing and authenticating client/server connections, by mblasee. + +- `NimBLEAdvertising::SetMinPreferred` and `NimBLEAdvertising::SetMinPreferred` re-added. + +- Conditional checks added for command line config options in `nimconfig.h` to support custom configuration in platformio. + +- `NimBLEClient::setValue` Now takes an extra bool parameter `response` to enable the use of write with response (default = false). + +- `NimBLEClient::getCharacteristic(uint16_t handle)` Enabling the use of the characteristic handle to be used to find +the NimBLERemoteCharacteristic object. + +- `NimBLEHIDDevice` class added by wakwak-koba. + +- `NimBLEServerCallbacks::onDisconnect` overloaded callback added to provide a ble_gap_conn_desc parameter for the application +to obtain information about the disconnected client. + +- Conditional checks in `nimconfig.h` for command line defined macros to support platformio config settings. + +### Changed +- `NimBLEAdvertising::start` now returns a bool value to indicate success/failure. + +- Some asserts were removed in `NimBLEAdvertising::start` and replaced with better return code handling and logging. + +- If a host reset event occurs, scanning and advertising will now only be restarted if their previous duration was indefinite. + +- `NimBLERemoteCharacteristic::subscribe` and `NimBLERemoteCharacteristic::registerForNotify` will now set the callback +regardless of the existance of the CCCD and return true unless the descriptor write operation failed. + +- Advertising tx power level is now sent in the advertisement packet instead of scan response. + +- `NimBLEScan` When the scan ends the scan stopped flag is now set before calling the scan complete callback (if used) +this allows the starting of a new scan from the callback function. + +### Fixed +- Sometimes `NimBLEClient::connect` would hang on the task block if no event arrived to unblock. +A time limit has been added to timeout appropriately. + +- When getting descriptors for a characterisic the end handle of the service was used as a proxy for the characteristic end +handle. This would be rejected by some devices and has been changed to use the next characteristic handle as the end when possible. + +- An exception could occur when deleting a client instance if a notification arrived while the attribute vectors were being +deleted. A flag has been added to prevent this. + +- An exception could occur after a host reset event when the host re-synced if the tasks that were stopped during the event did +not finish processing. A yield has been added after re-syncing to allow tasks to finish before proceeding. + +- Occasionally the controller would fail to send a disconnected event causing the client to indicate it is connected +and would be unable to reconnect. A timer has been added to reset the host/controller if it expires. + +- Occasionally the call to start scanning would get stuck in a loop on BLE_HS_EBUSY, this loop has been removed. + +- 16bit and 32bit UUID's in some cases were not discovered or compared correctly if the device +advertised them as 16/32bit but resolved them to 128bits. Both are now checked. + +- `FreeRTOS` compile errors resolved in latest Ardruino core and IDF v3.3. + +- Multiple instances of `time()` called inside critical sections caused sporadic crashes, these have been moved out of critical regions. + +- Advertisement type now correctly set when using non-connectable (advertiser only) mode. + +- Advertising payload length correction, now accounts for appearance. + +- (Arduino) Ensure controller mode is set to BLE Only. + + +## [1.0.2] - 2020-09-13 + +### Changed + +- `NimBLEAdvertising::start` Now takes 2 optional parameters, the first is the duration to advertise for (in seconds), the second is a +callback that is invoked when advertsing ends and takes a pointer to a `NimBLEAdvertising` object (similar to the `NimBLEScan::start` API). + +- (Arduino) Maximum BLE connections can now be altered by only changing the value of `CONFIG_BT_NIMBLE_MAX_CONNECTIONS` in `nimconfig.h`. +Any changes to the controller max connection settings in `sdkconfig.h` will now have no effect when using this library. + +- (Arduino) Revert the previous change to fix the advertising start delay. Instead a replacement fix that routes all BLE controller commands from +a task running on core 0 (same as the controller) has been implemented. This improves response times and reliability for all BLE functions. + + +## [1.0.1] - 2020-09-02 + +### Added + +- Empty `NimBLEAddress` constructor: `NimBLEAddress()` produces an address of 00:00:00:00:00:00 type 0. +- Documentation of the difference of NimBLEAddress::getNative vs the original bluedroid library. + +### Changed + +- notify_callback typedef is now defined as std::function to enable the use of std::bind to call a class member function. + +### Fixed + +- Fix advertising start delay when first called. + + +## [1.0.0] - 2020-08-22 + +First stable release. + +All the original library functionality is complete and many extras added with full documentation. diff --git a/lib/libesp32_div/esp-nimble-cpp/CMakeLists.txt b/lib/libesp32_div/esp-nimble-cpp/CMakeLists.txt new file mode 100644 index 000000000..90c22bd19 --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/CMakeLists.txt @@ -0,0 +1,64 @@ +# The following lines of boilerplate have to be in your project's +# CMakeLists in this exact order for cmake to work correctly +cmake_minimum_required(VERSION 3.5) + +idf_build_get_property(__hack_component_targets __COMPONENT_TARGETS) + +if("esp-nimble-component" IN_LIST BUILD_COMPONENTS OR "__esp-nimble-component" IN_LIST __hack_component_targets) + list(APPEND ESP_NIMBLE_PRIV_REQUIRES + esp-nimble-component + ) +elseif("nimble" IN_LIST BUILD_COMPONENTS OR "__nimble" IN_LIST __hack_component_targets) + list(APPEND ESP_NIMBLE_PRIV_REQUIRES + nimble + ) +endif() + +if("arduino" IN_LIST BUILD_COMPONENTS OR __hack_component_targets MATCHES "__idf_arduino") + list(APPEND ESP_NIMBLE_PRIV_REQUIRES + arduino + ) +elseif("framework-arduinoespressif32" IN_LIST BUILD_COMPONENTS OR __hack_component_targets MATCHES "___idf_framework-arduinoespressif32") + list(APPEND ESP_NIMBLE_PRIV_REQUIRES + framework-arduinoespressif32 + ) +endif() + +idf_component_register( + REQUIRED_IDF_TARGETS + "esp32" + "esp32s3" + "esp32c2" + "esp32c3" + "esp32c6" + INCLUDE_DIRS + "src" + SRCS + "src/NimBLE2904.cpp" + "src/NimBLEAddress.cpp" + "src/NimBLEAdvertisedDevice.cpp" + "src/NimBLEAdvertising.cpp" + "src/NimBLEBeacon.cpp" + "src/NimBLECharacteristic.cpp" + "src/NimBLEClient.cpp" + "src/NimBLEDescriptor.cpp" + "src/NimBLEDevice.cpp" + "src/NimBLEEddystoneTLM.cpp" + "src/NimBLEEddystoneURL.cpp" + "src/NimBLEExtAdvertising.cpp" + "src/NimBLEHIDDevice.cpp" + "src/NimBLERemoteCharacteristic.cpp" + "src/NimBLERemoteDescriptor.cpp" + "src/NimBLERemoteService.cpp" + "src/NimBLEScan.cpp" + "src/NimBLEServer.cpp" + "src/NimBLEService.cpp" + "src/NimBLEUtils.cpp" + "src/NimBLEUUID.cpp" + REQUIRES + bt + nvs_flash + PRIV_REQUIRES + ${ESP_NIMBLE_PRIV_REQUIRES} +) + diff --git a/lib/libesp32_div/esp-nimble-cpp/CMakeLists.txt_idf3 b/lib/libesp32_div/esp-nimble-cpp/CMakeLists.txt_idf3 new file mode 100644 index 000000000..c548f9021 --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/CMakeLists.txt_idf3 @@ -0,0 +1,56 @@ +# The following lines of boilerplate have to be in your project's +# CMakeLists in this exact order for cmake to work correctly +cmake_minimum_required(VERSION 3.5) + +set(SUPPORTED_TARGETS esp32) + +set(COMPONENT_SRCS + "src/NimBLE2904.cpp" + "src/NimBLEAddress.cpp" + "src/NimBLEAdvertisedDevice.cpp" + "src/NimBLEAdvertising.cpp" + "src/NimBLEBeacon.cpp" + "src/NimBLECharacteristic.cpp" + "src/NimBLEClient.cpp" + "src/NimBLEDescriptor.cpp" + "src/NimBLEDevice.cpp" + "src/NimBLEEddystoneTLM.cpp" + "src/NimBLEEddystoneURL.cpp" + "src/NimBLEHIDDevice.cpp" + "src/NimBLERemoteCharacteristic.cpp" + "src/NimBLERemoteDescriptor.cpp" + "src/NimBLERemoteService.cpp" + "src/NimBLEScan.cpp" + "src/NimBLESecurity.cpp" + "src/NimBLEServer.cpp" + "src/NimBLEService.cpp" + "src/NimBLEUtils.cpp" + "src/NimBLEUUID.cpp" +) + +set(COMPONENT_ADD_INCLUDEDIRS + src +) + +set(COMPONENT_PRIV_REQUIRES + nvs_flash + bt +) + +if(COMPONENTS MATCHES "esp-nimble-component") + list(APPEND COMPONENT_PRIV_REQUIRES + esp-nimble-component + ) +elseif(COMPONENTS MATCHES "nimble") + list(APPEND COMPONENT_PRIV_REQUIRES + nimble + ) +endif() + +if(COMPONENTS MATCHES "arduino") + list(APPEND COMPONENT_PRIV_REQUIRES + arduino + ) +endif() + +register_component() diff --git a/lib/libesp32_div/esp-nimble-cpp/Kconfig b/lib/libesp32_div/esp-nimble-cpp/Kconfig new file mode 100644 index 000000000..730f8cd96 --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/Kconfig @@ -0,0 +1,72 @@ +menu "ESP-NimBLE-CPP configuration" + +choice NIMBLE_CPP_LOG_LEVEL + prompt "NimBLE CPP log verbosity" + default NIMBLE_CPP_LOG_LEVEL_NONE + help + Select NimBLE CPP log verbosity level. + + config NIMBLE_CPP_LOG_LEVEL_NONE + bool "No logs" + config NIMBLE_CPP_LOG_LEVEL_ERROR + bool "Error logs" + config NIMBLE_CPP_LOG_LEVEL_WARNING + bool "Warning logs" + config NIMBLE_CPP_LOG_LEVEL_INFO + bool "Info logs" + config NIMBLE_CPP_LOG_LEVEL_DEBUG + bool "Debug logs" +endchoice #NIMBLE_CPP_LOG_LEVEL + +config NIMBLE_CPP_LOG_LEVEL + int + default 0 if NIMBLE_CPP_LOG_LEVEL_NONE + default 1 if NIMBLE_CPP_LOG_LEVEL_ERROR + default 2 if NIMBLE_CPP_LOG_LEVEL_WARNING + default 3 if NIMBLE_CPP_LOG_LEVEL_INFO + default 4 if NIMBLE_CPP_LOG_LEVEL_DEBUG + +config NIMBLE_CPP_ENABLE_RETURN_CODE_TEXT + bool "Show NimBLE return codes as text in debug log." + default "n" + help + Enabling this option will display return code values as text + messages in the debug log. This will use approximately 8kB + of flash memory. + +config NIMBLE_CPP_ENABLE_GAP_EVENT_CODE_TEXT + bool "Show NimBLE gap events as text in debug log." + default "n" + help + Enabling this option will display gap event codes as text + messages in the debug log. This will use approximately 1kB + of flash memory. + +config NIMBLE_CPP_ENABLE_ADVERTISEMENT_TYPE_TEXT + bool "Show advertisment types as text in debug log." + default "n" + help + Enabling this option will display advertisment types recieved + while scanning as text messages in the debug log. + This will use approximately 250 bytes of flash memory. + +config NIMBLE_CPP_ATT_VALUE_TIMESTAMP_ENABLED + bool "Enable timestamps to be stored with attribute values." + default "n" + help + Enabling this option will store the timestamp when an attribute value is updated. + This allows for checking the last update time using getTimeStamp() + or getValue(time_t*). If disabled, the timestamp returned from these functions will be 0. + Disabling timestamps will reduce the memory used for each value. + +config NIMBLE_CPP_ATT_VALUE_INIT_LENGTH + int "Initial attribute value size (bytes) for empty values." + range 1 512 + default 20 + help + Sets the default allocation size (bytes) for each attribute if not specified + when the constructor is called. This is also the size used when a remote + characteristic or descriptor is constructed before a value is read/notifed. + Increasing this will reduce reallocations but increase memory footprint. + +endmenu diff --git a/lib/libesp32_div/esp-nimble-cpp/LICENSE b/lib/libesp32_div/esp-nimble-cpp/LICENSE new file mode 100644 index 000000000..ff162769f --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/LICENSE @@ -0,0 +1,203 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "{}" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright {2020} {Ryan Powell} + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + This product partly derives from esp32-snippets; Copyright 2017 Neil Kolban. \ No newline at end of file diff --git a/lib/libesp32_div/esp-nimble-cpp/README.md b/lib/libesp32_div/esp-nimble-cpp/README.md new file mode 100644 index 000000000..7f37effad --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/README.md @@ -0,0 +1,70 @@ +[Latest release ![Release Version](https://img.shields.io/github/release/h2zero/esp-nimble-cpp.svg?style=plastic) +![Release Date](https://img.shields.io/github/release-date/h2zero/esp-nimble-cpp.svg?style=plastic)](https://github.com/h2zero/esp-nimble-cpp/releases/latest/) + +Need help? Have questions or suggestions? Join the [![Gitter](https://badges.gitter.im/NimBLE-Arduino/community.svg)](https://gitter.im/NimBLE-Arduino/community?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge) +
+ +# esp-nimble-cpp + +NimBLE CPP library for use with ESP32 that attempts to maintain compatibility with the [nkolban cpp_uitls BLE API](https://github.com/nkolban/esp32-snippets/tree/master/cpp_utils). + +**An Arduino version of this library, including NimBLE, can be [found here.](https://github.com/h2zero/NimBLE-Arduino)** + +This library **significantly** reduces resource usage and improves performance for ESP32 BLE applications as compared +with the bluedroid based library. The goal is to maintain, as much as reasonable, compatibility with the original +library but refactored to use the NimBLE stack. In addition, this library will be more actively developed and maintained +to provide improved capabilites and stability over the original. + +**Testing shows a nearly 50% reduction in flash use and approx. 100kB less ram consumed vs the original!** +*Your results may vary* +
+ +# What is NimBLE? +NimBLE is a completely open source Bluetooth Low Energy stack produced by [Apache](https://github.com/apache/mynewt-nimble). +It is more suited to resource constrained devices than bluedroid and has now been ported to the ESP32 by Espressif. +
+ +# Installation + +### ESP-IDF v4.0+ +Download as .zip and extract or clone into the components folder in your esp-idf project. + +Run menuconfig, go to `Component config->Bluetooth` enable Bluetooth and in `Bluetooth host` NimBLE. +Configure settings in `NimBLE Options`. +`#include "NimBLEDevice.h"` in main.cpp. +Call `NimBLEDevice::init("");` in `app_main`. +
+ +### ESP-IDF v3.2 & v3.3 +The NimBLE component does not come with these versions of IDF (now included in 3.3.2 and above). +A backport that works in these versions has been created and is [available here](https://github.com/h2zero/esp-nimble-component). +Download or clone that repo into your project/components folder and run menuconfig. +Configure settings in `main menu -> NimBLE Options`. + +`#include "NimBLEDevice.h"` in main.cpp. +Call `NimBLEDevice::init("");` in `app_main`. +
+ +# Using +This library is intended to be compatible with the original ESP32 BLE functions and types with minor changes. + +If you have not used the original Bluedroid library please refer to the [New user guide](docs/New_user_guide.md). + +If you are familiar with the original library, see: [The migration guide](docs/Migration_guide.md) for details about breaking changes and migration. + +Also see [Improvements_and_updates](docs/Improvements_and_updates.md) for information about non-breaking changes. + +[Full API documentation and class list can be found here.](https://h2zero.github.io/esp-nimble-cpp/) +
+ +## Using with Arduino as an IDF component and CMake +When using this library along with Arduino and compiling with *CMake* you must add `add_compile_definitions(ARDUINO_ARCH_ESP32=1)` +in your project/CMakeLists.txt after the line `include($ENV{IDF_PATH}/tools/cmake/project.cmake)` to prevent Arduino from releasing BLE memory. +
+ +# Acknowledgments +* [nkolban](https://github.com/nkolban) and [chegewara](https://github.com/chegewara) for the [original esp32 BLE library](https://github.com/nkolban/esp32-snippets/tree/master/cpp_utils) this project was derived from. +* [beegee-tokyo](https://github.com/beegee-tokyo) for contributing your time to test/debug and contributing the beacon examples. +* [Jeroen88](https://github.com/Jeroen88) for the amazing help debugging and improving the client code. +
+ diff --git a/lib/libesp32_div/esp-nimble-cpp/component.mk b/lib/libesp32_div/esp-nimble-cpp/component.mk new file mode 100644 index 000000000..563436815 --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/component.mk @@ -0,0 +1,2 @@ +COMPONENT_ADD_INCLUDEDIRS := src +COMPONENT_SRCDIRS := src \ No newline at end of file diff --git a/lib/libesp32_div/esp-nimble-cpp/docs/Bluetooth 5 features.md b/lib/libesp32_div/esp-nimble-cpp/docs/Bluetooth 5 features.md new file mode 100644 index 000000000..3737b0d7e --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/docs/Bluetooth 5 features.md @@ -0,0 +1,28 @@ +# Bluetooth 5.x features + +## About extended advertising +Extended advertising allows for much more capability and flexibility. + +* Allows for 251 bytes of advertisement data and up to 1650 bytes when chained (configuration dependant) vs 31. + +* New PHY's (physical layers) that allow for faster data rate (2M PHY) or long range/slower data rates (CODED PHY) as well as the original 1M PHY. + +* New periodic advertising, allowing the scanning device to sync with the advertisements of a beacon. This allows for the scanning device to sleep or perform other tasks before the next expected advertisement is sent, preserving cpu cycles and power (To be implemented). +
+ +## Enabling extended advertising +Extended advertising is supported when enabled with the config option `CONFIG_BT_NIMBLE_EXT_ADV` set to a value of 1. This is done in menuconfig under `Component config > Bluetooth > NimBLE options > Enable extended advertising`, or set in `nimconfig.h` for Arduino, or in `build_flags` in PlatformIO. + +When enabled the following will occur: +* `NimBLEScan::start` method will scan on both the 1M PHY and the coded PHY standards automatically. + +* `NimBLEClient::connect` will use the primary PHY the device is listening on, unless specified (see below). + +* `NimBLEClient::setConnectPhy` becomes available to specify the PHY's to connect with (default is all). + +* `NimBLEAdvertising` is no longer available for use and is replaced by `NimBLEExtAdvertising`. `NimBLEDevice::getAdvertising` will now return an instance of `NimBLEExtAdvertising`. + +* `NimBLEAdvertisementData` is no longer available for use and is replaced by `NimBLEExtAdvertisement`. This new class is where everything about the advertisement is configured, including the advertisement intervals and advertisement ended callback. + + + diff --git a/lib/libesp32_div/esp-nimble-cpp/docs/Doxyfile b/lib/libesp32_div/esp-nimble-cpp/docs/Doxyfile new file mode 100644 index 000000000..c67e49f5a --- /dev/null +++ b/lib/libesp32_div/esp-nimble-cpp/docs/Doxyfile @@ -0,0 +1,2778 @@ +# Doxyfile 1.9.5 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). +# +# Note: +# +# Use doxygen to compare the used configuration file with the template +# configuration file: +# doxygen -x [configFile] +# Use doxygen to compare the used configuration file with the template +# configuration file without replacing the environment variables or CMake type +# replacement variables: +# doxygen -x_noenv [configFile] + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = esp-nimble-cpp + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = 1.4.1 + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = doxydocs + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096 +# sub-directories (in 2 levels) under the output directory of each output format +# and will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to +# control the number of sub-directories. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# Controls the number of sub-directories that will be created when +# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every +# level increment doubles the number of directories, resulting in 4096 +# directories at level 8 which is the default and also the maximum value. The +# sub-directories are organized in 2 levels, the first level always has a fixed +# numer of 16 directories. +# Minimum value: 0, maximum value: 8, default value: 8. +# This tag requires that the tag CREATE_SUBDIRS is set to YES. + +CREATE_SUBDIRS_LEVEL = 8 + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian, +# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English +# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek, +# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with +# English messages), Korean, Korean-en (Korean with English messages), Latvian, +# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, +# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, +# Swedish, Turkish, Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# By default Python docstrings are displayed as preformatted text and doxygen's +# special commands cannot be used. By setting PYTHON_DOCSTRING to NO the +# doxygen's special commands can be used and the contents of the docstring +# documentation blocks is shown as doxygen documentation. +# The default value is: YES. + +PYTHON_DOCSTRING = YES + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:^^" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". Note that you cannot put \n's in the value part of an alias +# to insert newlines (in the resulting output). You can put ^^ in the value part +# of an alias to insert a newline as if a physical newline was in the original +# file. When you need a literal { or } or , in the value part of an alias you +# have to escape them by means of a backslash (\), this can lead to conflicts +# with the commands \{ and \} for these it is advised to use the version @{ and +# @} or use a double escape (\\{ and \\}) + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, JavaScript, +# Csharp (C#), C, C++, Lex, D, PHP, md (Markdown), Objective-C, Python, Slice, +# VHDL, Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files). For instance to make doxygen treat .inc files +# as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. When specifying no_extension you should add +# * to the FILE_PATTERNS. +# +# Note see also the list of default file extension mappings. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See https://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = YES + +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use +# during processing. When set to 0 doxygen will based this on the number of +# cores available in the system. You can set it explicitly to a value larger +# than 0 to get more control over the balance between CPU load and processing +# speed. At this moment only the input processing can be done using multiple +# threads. Since this is still an experimental feature the default is set to 1, +# which effectively disables parallel processing. Please report any issues you +# encounter. Generating dot graphs in parallel is controlled by the +# DOT_NUM_THREADS setting. +# Minimum value: 0, maximum value: 32, default value: 1. + +NUM_PROC_THREADS = 1 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If this flag is set to YES, the name of an unnamed parameter in a declaration +# will be determined by the corresponding definition. By default unnamed +# parameters remain unnamed in the output. +# The default value is: YES. + +RESOLVE_UNNAMED_PARAMS = YES + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = YES + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = YES + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# declarations. If set to NO, these declarations will be included in the +# documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = YES + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = YES + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# With the correct setting of option CASE_SENSE_NAMES doxygen will better be +# able to match the capabilities of the underlying filesystem. In case the +# filesystem is case sensitive (i.e. it supports files in the same directory +# whose names only differ in casing), the option must be set to YES to properly +# deal with such files in case they appear in the input. For filesystems that +# are not case sensitive the option should be set to NO to properly deal with +# output files written for symbols that only differ in casing, such as for two +# classes, one named CLASS and the other named Class, and to also support +# references to files without having to specify the exact matching casing. On +# Windows (including Cygwin) and MacOS, users should typically set this option +# to NO, whereas on Linux or other Unix flavors it should typically be set to +# YES. +# Possible values are: SYSTEM, NO and YES. +# The default value is: SYSTEM. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_HEADERFILE tag is set to YES then the documentation for a class +# will show which file needs to be included to use the class. +# The default value is: YES. + +SHOW_HEADERFILE = YES + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = NO + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if ... \endif and \cond +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = NO + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. See also section "Changing the +# layout of pages" for information. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as documenting some parameters in +# a documented function twice, or documenting parameters that don't exist or +# using markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete +# function parameter documentation. If set to NO, doxygen will accept that some +# parameters have no documentation without warning. +# The default value is: YES. + +WARN_IF_INCOMPLETE_DOC = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong parameter +# documentation, but not about the absence of documentation. If EXTRACT_ALL is +# set to YES then this flag will automatically be disabled. See also +# WARN_IF_INCOMPLETE_DOC +# The default value is: NO. + +WARN_NO_PARAMDOC = NO + +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS +# then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but +# at the end of the doxygen process doxygen will return with a non-zero status. +# Possible values are: NO, YES and FAIL_ON_WARNINGS. +# The default value is: NO. + +WARN_AS_ERROR = YES + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# See also: WARN_LINE_FORMAT +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# In the $text part of the WARN_FORMAT command it is possible that a reference +# to a more specific place is given. To make it easier to jump to this place +# (outside of doxygen) the user can define a custom "cut" / "paste" string. +# Example: +# WARN_LINE_FORMAT = "'vi $file +$line'" +# See also: WARN_FORMAT +# The default value is: at line $line of file $file. + +WARN_LINE_FORMAT = "at line $line of file $file" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). In case the file specified cannot be opened for writing the +# warning and error messages are written to standard error. When as file - is +# specified the warning and error messages are written to standard output +# (stdout). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING +# Note: If this tag is empty the current directory is searched. + +INPUT = ../CHANGELOG.md \ + . \ + ../src + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: +# https://www.gnu.org/software/libiconv/) for the list of possible encodings. +# See also: INPUT_FILE_ENCODING +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify +# character encoding on a per file pattern basis. Doxygen will compare the file +# name with each pattern and apply the encoding instead of the default +# INPUT_ENCODING) if there is a match. The character encodings are a list of the +# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding +# "INPUT_ENCODING" for further information on supported encodings. + +INPUT_FILE_ENCODING = + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# Note the list of default checked file patterns might differ from the list of +# default file extension mappings. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, +# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C +# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd, +# *.vhdl, *.ucf, *.qsf and *.ice. + +FILE_PATTERNS = *.c \ + *.cc \ + *.cxx \ + *.cpp \ + *.c++ \ + *.java \ + *.ii \ + *.ixx \ + *.ipp \ + *.i++ \ + *.inl \ + *.idl \ + *.ddl \ + *.odl \ + *.h \ + *.hh \ + *.hxx \ + *.hpp \ + *.h++ \ + *.cs \ + *.d \ + *.php \ + *.php4 \ + *.php5 \ + *.phtml \ + *.inc \ + *.m \ + *.markdown \ + *.md \ + *.mm \ + *.dox \ + *.doc \ + *.txt \ + *.py \ + *.pyw \ + *.f90 \ + *.f95 \ + *.f03 \ + *.f08 \ + *.f18 \ + *.f \ + *.for \ + *.vhd \ + *.vhdl \ + *.ucf \ + *.qsf \ + *.ice + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = ../src/nimconfig_rename.h + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# ANamespace::AClass, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# +# +# where is the value of the INPUT_FILTER tag, and is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. +# +# Note that doxygen will use the data processed and written to standard output +# for further processing, therefore nothing else, like debug statements or used +# commands (so in case of a Windows batch file always use @echo OFF), should be +# written to standard output. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = index.md + +# The Fortran standard specifies that for fixed formatted Fortran code all +# characters from position 72 are to be considered as comment. A common +# extension is to allow longer lines before the automatic comment starts. The +# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can +# be processed before the automatic comment starts. +# Minimum value: 7, maximum value: 10000, default value: 72. + +FORTRAN_COMMENT_AFTER = 72 + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# entity all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = YES + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see https://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = YES + +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: +# http://clang.llvm.org/) for more accurate parsing at the cost of reduced +# performance. This can be particularly helpful with template rich C++ code for +# which doxygen's built-in parser lacks the necessary type information. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If the CLANG_ASSISTED_PARSING tag is set to YES and the CLANG_ADD_INC_PATHS +# tag is set to YES then doxygen will add the directory of each input to the +# include path. +# The default value is: YES. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_ADD_INC_PATHS = YES + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the directory containing a file called compile_commands.json. This +# file is the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the +# options used when the source files were built. This is equivalent to +# specifying the -p option to a clang tool, such as clang-check. These options +# will then be passed to the parser. Any options specified with CLANG_OPTIONS +# will be added as well. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output +# should be rendered with a dark or light theme. Default setting AUTO_LIGHT +# enables light output unless the user preference is dark output. Other options +# are DARK to always use dark mode, LIGHT to always use light mode, AUTO_DARK to +# default to dark mode unless the user prefers light mode, and TOGGLE to let the +# user toggle between dark and light mode via a button. +# Possible values are: LIGHT Always generate light output., DARK Always generate +# dark output., AUTO_LIGHT Automatically set the mode according to the user +# preference, use light mode if no preference is set (the default)., AUTO_DARK +# Automatically set the mode according to the user preference, use dark mode if +# no preference is set. and TOGGLE Allow to user to switch between light and +# dark mode via a button.. +# The default value is: AUTO_LIGHT. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE = AUTO_LIGHT + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a color-wheel, see +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use gray-scales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via JavaScript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have JavaScript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = NO + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: +# https://developer.apple.com/xcode/), introduced with OSX 10.5 (Leopard). To +# create a documentation set, doxygen will generate a Makefile in the HTML +# output directory. Running make will produce the docset in that directory and +# running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag determines the URL of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDURL = + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# on Windows. In the beginning of 2021 Microsoft took the original page, with +# a.o. the download links, offline the HTML help workshop was already many years +# in maintenance mode). You can download the HTML help workshop from the web +# archives at Installation executable (see: +# http://web.archive.org/web/20160201063255/http://download.microsoft.com/downlo +# ad/0/A/9/0A939EF6-E31C-430F-A3DF-DFAE7960D564/htmlhelp.exe). +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the main .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual-folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom-filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location (absolute path +# including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to +# run qhelpgenerator on the generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = NO + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine tune the look of the index (see "Fine-tuning the output"). As an +# example, the default style sheet generated by doxygen has an example that +# shows how to put an image at the root of the tree instead of the PROJECT_NAME. +# Since the tree basically has the same information as the tab index, you could +# consider setting DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# When both GENERATE_TREEVIEW and DISABLE_INDEX are set to YES, then the +# FULL_SIDEBAR option determines if the side bar is limited to only the treeview +# area (value NO) or if it should extend to the full height of the window (value +# YES). Setting this to YES gives a layout similar to +# https://docs.readthedocs.io with more room for contents, but less room for the +# project logo, title, and description. If either GENERATE_TREEVIEW or +# DISABLE_INDEX is set to NO, this option has no effect. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FULL_SIDEBAR = NO + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 4 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email +# addresses. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +OBFUSCATE_EMAILS = YES + +# If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg +# tool (see https://github.com/dawbarton/pdf2svg) or inkscape (see +# https://inkscape.org) to generate formulas as SVG images instead of PNGs for +# the HTML output. These images will generally look nicer at scaled resolutions. +# Possible values are: png (the default) and svg (looks nicer but requires the +# pdf2svg or inkscape tool). +# The default value is: png. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FORMULA_FORMAT = png + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands +# to create new LaTeX commands to be used in formulas as building blocks. See +# the section "Including formulas" for details. + +FORMULA_MACROFILE = + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# https://www.mathjax.org) which uses client side JavaScript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# With MATHJAX_VERSION it is possible to specify the MathJax version to be used. +# Note that the different versions of MathJax have different requirements with +# regards to the different settings, so it is possible that also other MathJax +# settings have to be changed when switching between the different MathJax +# versions. +# Possible values are: MathJax_2 and MathJax_3. +# The default value is: MathJax_2. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_VERSION = MathJax_2 + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. For more details about the output format see MathJax +# version 2 (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) and MathJax version 3 +# (see: +# http://docs.mathjax.org/en/latest/web/components/output.html). +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility. This is the name for Mathjax version 2, for MathJax version 3 +# this will be translated into chtml), NativeMML (i.e. MathML. Only supported +# for NathJax 2. For MathJax version 3 chtml will be used instead.), chtml (This +# is the name for Mathjax version 3, for MathJax version 2 this will be +# translated into HTML-CSS) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from https://www.mathjax.org before deployment. The default value is: +# - in case of MathJax version 2: https://cdn.jsdelivr.net/npm/mathjax@2 +# - in case of MathJax version 3: https://cdn.jsdelivr.net/npm/mathjax@3 +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = https://cdn.jsdelivr.net/npm/mathjax@2 + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# for MathJax version 2 (see https://docs.mathjax.org/en/v2.7-latest/tex.html +# #tex-and-latex-extensions): +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# For example for MathJax version 3 (see +# http://docs.mathjax.org/en/latest/input/tex/extensions/index.html): +# MATHJAX_EXTENSIONS = ams +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: +# http://docs.mathjax.org/en/v2.7-latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use + S +# (what the is depends on the OS and browser, but it is typically +# , /