From 9b026fb96c2fafff0793a110eea22c9a377953be Mon Sep 17 00:00:00 2001 From: Jason2866 <24528715+Jason2866@users.noreply.github.com> Date: Thu, 11 Feb 2021 16:53:37 +0100 Subject: [PATCH] Update tasmota_template.h --- tasmota/tasmota_template.h | 53 -------------------------------------- 1 file changed, 53 deletions(-) diff --git a/tasmota/tasmota_template.h b/tasmota/tasmota_template.h index c7325188a..98567ca42 100644 --- a/tasmota/tasmota_template.h +++ b/tasmota/tasmota_template.h @@ -2354,7 +2354,6 @@ enum SupportedModules { WT32_ETH01, TTGO_WATCH, M5STACK_CORE2, - BLUETOOTH, MAXMODULE }; // Default module settings @@ -2378,9 +2377,6 @@ const uint8_t kModuleNiceList[] PROGMEM = { #ifdef USE_M5STACK_CORE2 M5STACK_CORE2, #endif // USE_M5STACK_CORE2 -#ifdef USE_BLUETOOTH - BLUETOOTH, -#endif // USE_BLUETOOTH }; const char kModuleNames[] PROGMEM = @@ -2403,9 +2399,6 @@ const char kModuleNames[] PROGMEM = #ifdef USE_M5STACK_CORE2 "M5Stack Core2|" #endif // USE_M5STACK_CORE2 -#ifdef USE_BLUETOOTH - "ESP32-BLE|" -#endif // USE_BLUETOOTH ; const mytmplt kModules[] PROGMEM = { @@ -2550,52 +2543,6 @@ const mytmplt kModules[] PROGMEM = { // }, #endif // USE_ESP32_SOLO -#ifdef USE_BLUETOOTH - { // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32) - AGPIO(GPIO_USER), // 0 (I)O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK - AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 - AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0 - AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2 - AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER - AGPIO(GPIO_USER), // 5 IO GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK - // 6 IO GPIO6, Flash CLK - // 7 IO GPIO7, Flash D0 - // 8 IO GPIO8, Flash D1 - AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD - AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD - // 11 IO GPIO11, Flash CMD - AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.) - AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER - AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 - AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.) - AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT - AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180 - AGPIO(GPIO_USER), // 18 IO GPIO18, VSPICLK, HS1_DATA7 - AGPIO(GPIO_USER), // 19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0 - 0, // 20 - AGPIO(GPIO_USER), // 21 IO GPIO21, VSPIHD, EMAC_TX_EN - AGPIO(GPIO_USER), // 22 IO LED GPIO22, VSPIWP, U0RTS, EMAC_TXD1 - AGPIO(GPIO_USER), // 23 IO GPIO23, VSPID, HS1_STROBE - 0, // 24 - AGPIO(GPIO_USER), // 25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 - AGPIO(GPIO_USER), // 26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 - AGPIO(GPIO_USER), // 27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV - 0, // 28 - 0, // 29 - 0, // 30 - 0, // 31 - AGPIO(GPIO_USER), // 32 IO GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9 - AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8 - AGPIO(GPIO_USER), // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4 - AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5 - AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0 - 0, // 37 NO PULLUP - 0, // 38 NO PULLUP - AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3 - 0 // Flag - }, -#endif // USE_BLUETOOTH - #ifdef USE_WT32_ETH01 { // WT32_ETH01 - (ESP32) 0, // 0 (I)O GPIO0, Ethernet EMAC_REF_CLK