diff --git a/tasmota/my_user_config.h b/tasmota/my_user_config.h
index 776e7ea64..c68dbed29 100644
--- a/tasmota/my_user_config.h
+++ b/tasmota/my_user_config.h
@@ -566,7 +566,7 @@
 //  #define MAGICSWITCH_MASKING_WINDOW_LEN  5      // Overridable masking window (in number of 50ms loops)
 
 // -- Optional light modules ----------------------
-#define USE_LIGHT                                // Add support for light control  
+#define USE_LIGHT                                // Add support for light control
 #define USE_MY92X1                               // Add support for MY92X1 RGBCW led controller as used in Sonoff B1, Ailight and Lohas
 #define USE_SM16716                              // Add support for SM16716 RGB LED controller (+0k7 code)
 #define USE_SM2135                               // Add support for SM2135 RGBCW led control as used in Action LSC (+0k6 code)
@@ -742,8 +742,8 @@
 //                                                 // Both settings together allow to limit searching for INA3221 to only a subset of addresses
 //    #define  INA3221_CALC_CHARGE_AH              // calculate charge in Ah
 //    #define  INA3221_CALC_ENERGY_WH              // calculate energy in Wh
-//    #define  INA3221_SUPPLY_SIDE      0x7777     // the driver adds the measured Shunt Voltage to the Bus Voltage 
-                                                   // for the cannel with a negativ shunt (shunt <0) thus showing the values of the supply side (IN+) 
+//    #define  INA3221_SUPPLY_SIDE      0x7777     // the driver adds the measured Shunt Voltage to the Bus Voltage
+                                                   // for the cannel with a negativ shunt (shunt <0) thus showing the values of the supply side (IN+)
                                                    // additionaly the bits set (bit 0,1,2) enable the scanning of the voltage in the according channel
 //  #define USE_PMSA003I                           // [I2cDriver78] Enable PMSA003I Air Quality Sensor (I2C address 0x12) (+1k8 code)
 //  #define USE_GDK101                             // [I2cDriver79] Enable GDK101 sensor (I2C addresses 0x18 - 0x1B) (+1k2 code)
@@ -894,7 +894,8 @@
 //#define USE_VINDRIKTNING                         // Add support for IKEA VINDRIKTNING particle concentration sensor (+0k6 code)
 //  #define VINDRIKTNING_SHOW_PM1                  // Display undocumented/supposed PM1.0 values
 //  #define VINDRIKTNING_SHOW_PM10                 // Display undocumented/supposed PM10 values
-//#define USE_LD2410                               // Add support for HLK-LD2410 24GHz smart wave motion sensor (+2k8 code)
+//#define USE_LD2410                               // Add support for HLK-LD2410 24GHz smart wave motion sensor (+3k7 code, 88 RAM)
+//#define USE_LD2410S                              // Add support for HLK-LD2410S Ultra Low-power 24GHz smart wave motion sensor (+4k7 code, 144 RAM)
 //#define USE_LOX_O2                               // Add support for LuminOx LOX O2 Sensor (+0k8 code)
 //#define USE_GM861                                // Add support for GM861 1D and 2D Bar Code Reader (+1k3 code)
 //  #define GM861_DECODE_AIM                       // Decode AIM-id (+0k3 code)