From 9b6dc1f0f19bcb308fa5273aa54dd8f1b84c6c58 Mon Sep 17 00:00:00 2001 From: md5sum-as Date: Thu, 19 Dec 2024 18:41:42 +0300 Subject: [PATCH] my_user_config add info for HLK-LD2410 HLK-LD2410S and remove trailing spaces (#22670) * my_user_config add info for HLK-LD2410 HLK-LD2410S * Update tasmota/my_user_config.h Co-authored-by: Erik Kunze --------- Co-authored-by: a.spirenkov@vk.team Co-authored-by: Erik Kunze --- tasmota/my_user_config.h | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/tasmota/my_user_config.h b/tasmota/my_user_config.h index 776e7ea64..c68dbed29 100644 --- a/tasmota/my_user_config.h +++ b/tasmota/my_user_config.h @@ -566,7 +566,7 @@ // #define MAGICSWITCH_MASKING_WINDOW_LEN 5 // Overridable masking window (in number of 50ms loops) // -- Optional light modules ---------------------- -#define USE_LIGHT // Add support for light control +#define USE_LIGHT // Add support for light control #define USE_MY92X1 // Add support for MY92X1 RGBCW led controller as used in Sonoff B1, Ailight and Lohas #define USE_SM16716 // Add support for SM16716 RGB LED controller (+0k7 code) #define USE_SM2135 // Add support for SM2135 RGBCW led control as used in Action LSC (+0k6 code) @@ -742,8 +742,8 @@ // // Both settings together allow to limit searching for INA3221 to only a subset of addresses // #define INA3221_CALC_CHARGE_AH // calculate charge in Ah // #define INA3221_CALC_ENERGY_WH // calculate energy in Wh -// #define INA3221_SUPPLY_SIDE 0x7777 // the driver adds the measured Shunt Voltage to the Bus Voltage - // for the cannel with a negativ shunt (shunt <0) thus showing the values of the supply side (IN+) +// #define INA3221_SUPPLY_SIDE 0x7777 // the driver adds the measured Shunt Voltage to the Bus Voltage + // for the cannel with a negativ shunt (shunt <0) thus showing the values of the supply side (IN+) // additionaly the bits set (bit 0,1,2) enable the scanning of the voltage in the according channel // #define USE_PMSA003I // [I2cDriver78] Enable PMSA003I Air Quality Sensor (I2C address 0x12) (+1k8 code) // #define USE_GDK101 // [I2cDriver79] Enable GDK101 sensor (I2C addresses 0x18 - 0x1B) (+1k2 code) @@ -894,7 +894,8 @@ //#define USE_VINDRIKTNING // Add support for IKEA VINDRIKTNING particle concentration sensor (+0k6 code) // #define VINDRIKTNING_SHOW_PM1 // Display undocumented/supposed PM1.0 values // #define VINDRIKTNING_SHOW_PM10 // Display undocumented/supposed PM10 values -//#define USE_LD2410 // Add support for HLK-LD2410 24GHz smart wave motion sensor (+2k8 code) +//#define USE_LD2410 // Add support for HLK-LD2410 24GHz smart wave motion sensor (+3k7 code, 88 RAM) +//#define USE_LD2410S // Add support for HLK-LD2410S Ultra Low-power 24GHz smart wave motion sensor (+4k7 code, 144 RAM) //#define USE_LOX_O2 // Add support for LuminOx LOX O2 Sensor (+0k8 code) //#define USE_GM861 // Add support for GM861 1D and 2D Bar Code Reader (+1k3 code) // #define GM861_DECODE_AIM // Decode AIM-id (+0k3 code)