From 21656fdd81bc177a02f81eb58fe8e9945f6aecd0 Mon Sep 17 00:00:00 2001
From: gemu2015 <gmutz2010@googlemail.com>
Date: Mon, 18 May 2020 10:19:13 +0200
Subject: [PATCH 1/4] ra8876 esp32

---
 lib/Xlatb_RA8876-gemu-1.0/RA8876.cpp | 52 ++++++++++++++++++++++++----
 lib/Xlatb_RA8876-gemu-1.0/RA8876.h   |  1 +
 tasmota/xdsp_10_RA8876.ino           | 17 +++++++--
 3 files changed, 61 insertions(+), 9 deletions(-)

diff --git a/lib/Xlatb_RA8876-gemu-1.0/RA8876.cpp b/lib/Xlatb_RA8876-gemu-1.0/RA8876.cpp
index 850b2bb8a..1d9a893e4 100644
--- a/lib/Xlatb_RA8876-gemu-1.0/RA8876.cpp
+++ b/lib/Xlatb_RA8876-gemu-1.0/RA8876.cpp
@@ -66,13 +66,14 @@ RA8876::RA8876(int8_t cs,int8_t mosi,int8_t miso,int8_t sclk,int8_t bp) : Render
 //#define RA8876_CS_LOW digitalWrite(m_csPin, LOW)
 //#define RA8876_CS_HIGH digitalWrite(m_csPin, HIGH)
 
-#ifdef ESP8266
+#ifndef ESP32
 #define RA8876_CS_LOW GPOC=(1<<m_csPin);
 #define RA8876_CS_HIGH GPOS=(1<<m_csPin);
 #else
-#define RA8876_CS_LOW digitalWrite(1<<m_csPin,0);
-#define RA8876_CS_HIGH digitalWrite(1<<m_csPin,1);
+#define RA8876_CS_LOW digitalWrite(m_csPin,0);
+#define RA8876_CS_HIGH digitalWrite(m_csPin,1);
 #endif
+
 /*
 extern void ICACHE_RAM_ATTR RA8876_digitalWrite(uint8_t pin, uint8_t val) {
   //stopWaveform(pin);
@@ -173,10 +174,8 @@ void RA8876::DisplayOnff(int8_t on) {
   uint8_t dpcr;
   SPI.beginTransaction(m_spiSettings);
   dpcr = readReg(RA8876_REG_DPCR);
-
   if (on) {
     dpcr |= 0x40;  // Display on
-    dim(dimmer);
   } else {
     dpcr &= 0x40^0xff;  // Display off
     // backlight off
@@ -185,12 +184,14 @@ void RA8876::DisplayOnff(int8_t on) {
   }
   writeReg(RA8876_REG_DPCR, dpcr);
   SPI.endTransaction();
+  if (on) {
+    dim(dimmer);
+  }
 }
 
 // 0-15
 void RA8876::dim(uint8_t contrast) {
   SPI.beginTransaction(m_spiSettings);
-
   dimmer=contrast;
   // pwm0 duty
   uint32_t duty=(contrast*1024)/15;
@@ -671,10 +672,18 @@ bool RA8876::begin(void) {
     return false;
   }
 
+#ifndef ESP32
   SPI.begin();
+#else
+  SPI.begin(_sclk,_miso,_mosi , -1);
+#endif
 
   m_spiSettings = SPISettings(RA8876_SPI_SPEED, MSBFIRST, SPI_MODE3);
 
+#ifdef RA8876_DEBUG
+  Serial.printf("RA8876 init\n");
+#endif
+
   softReset();
 
   if (!initPLL()) {
@@ -682,24 +691,44 @@ bool RA8876::begin(void) {
     return false;
   }
 
+#ifdef RA8876_DEBUG
+  Serial.printf("RA8876 init pll OK\n");
+#endif
+
   if (!initMemory(m_sdramInfo)) {
     //Serial.println("initMemory failed");
     return false;
   }
 
+#ifdef RA8876_DEBUG
+  Serial.printf("RA8876 init sdram OK\n");
+#endif
+
   if (!initDisplay()) {
     //Serial.println("initDisplay failed");
     return false;
   }
 
+#ifdef RA8876_DEBUG
+  Serial.printf("RA8876 init display OK\n");
+#endif
+
   // Set default font
   selectInternalFont(RA8876_FONT_SIZE_16);
   setTextScale(1);
 
+#ifdef RA8876_DEBUG
+  Serial.printf("RA8876 set scale OK\n");
+#endif
+
   setRotation(0);
 
   clearScreen(0);
 
+#ifdef RA8876_DEBUG
+  Serial.printf("RA8876 init complete\n");
+#endif
+
   return true;
 }
 
@@ -899,7 +928,8 @@ void RA8876::setAddrWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1) {
 
   writeCmd(RA8876_REG_MRWDP); //04h();
 
-  if (flag) SPI.endTransaction();
+  //if (flag) SPI.endTransaction();
+  SPI.endTransaction();
 }
 
 void RA8876::pushColors(uint16_t *data, uint8_t len, boolean first) {
@@ -980,7 +1010,9 @@ void RA8876::waitWriteFifo(void) {
       // timeout, soft reset
       softReset();
       SPI.beginTransaction(m_spiSettings);
+#ifdef RA8876_DEBUG
       Serial.printf("iter timeout fifo\n");
+#endif
       return;
     }
   }
@@ -1001,7 +1033,9 @@ void RA8876::wait_ready(void) {
       // timeout, soft reset
       softReset();
       SPI.beginTransaction(m_spiSettings);
+#ifdef RA8876_DEBUG
       Serial.printf("iter timeout cmd\n");
+#endif
       return;
     }
   }
@@ -1188,11 +1222,13 @@ void RA8876::setTextMode(void) {
   uint8_t icr = readReg(RA8876_REG_ICR);
   writeReg(RA8876_REG_ICR, icr | 0x04);
 
+  SPI.endTransaction();
   if (textcolor==textbgcolor) {
     setDrawMode_reg(1);
   } else {
     setDrawMode_reg(0);
   }
+  SPI.beginTransaction(m_spiSettings);
 
 }
 
@@ -1368,7 +1404,9 @@ size_t RA8876::xwrite(const uint8_t *buffer, size_t size) {
       ;  // Ignored
     else if (c == '\n')
     {
+      SPI.endTransaction();
       setCursor(0, getCursorY() + getTextSizeY());
+      SPI.beginTransaction(m_spiSettings);
       writeCmd(RA8876_REG_MRWDP);  // Reset current register for writing to memory
     }
     else if ((m_fontFlags & RA8876_FONT_FLAG_XLAT_FULLWIDTH) && ((c >= 0x21) || (c <= 0x7F)))
diff --git a/lib/Xlatb_RA8876-gemu-1.0/RA8876.h b/lib/Xlatb_RA8876-gemu-1.0/RA8876.h
index b27698027..5bf8b404f 100644
--- a/lib/Xlatb_RA8876-gemu-1.0/RA8876.h
+++ b/lib/Xlatb_RA8876-gemu-1.0/RA8876.h
@@ -23,6 +23,7 @@
 #include <SPI.h>
 #include <renderer.h>
 
+#undef SPRINT
 #define SPRINT(A) {char str[32];sprintf(str,"val: %d ",A);Serial.println((char*)str);}
 
 
diff --git a/tasmota/xdsp_10_RA8876.ino b/tasmota/xdsp_10_RA8876.ino
index 9c86ff2d7..6a44708cb 100644
--- a/tasmota/xdsp_10_RA8876.ino
+++ b/tasmota/xdsp_10_RA8876.ino
@@ -71,11 +71,24 @@ void RA8876_InitDriver()
     fg_color = RA8876_WHITE;
     bg_color = RA8876_BLACK;
 
+#ifdef ESP32
+#define HW_SPI_MOSI 23
+#define HW_SPI_MISO 19
+#define HW_SPI_CLK 18
+#else
+#undef HW_SPI_MOSI
+#define HW_SPI_MOSI 13
+#undef HW_SPI_MISO
+#define HW_SPI_MISO 12
+#undef HW_SPI_CLK
+#define HW_SPI_CLK 14
+#endif
+
     // init renderer, must use hardware spi
-    if (PinUsed(GPIO_SSPI_CS) && (Pin(GPIO_SSPI_MOSI)==13) && (Pin(GPIO_SSPI_MISO)==12) && (Pin(GPIO_SSPI_SCLK)==14)) {
+    if (PinUsed(GPIO_SSPI_CS) && (Pin(GPIO_SSPI_MOSI)==HW_SPI_MOSI) && (Pin(GPIO_SSPI_MISO)==HW_SPI_MISO) && (Pin(GPIO_SSPI_SCLK)==HW_SPI_CLK)) {
       ra8876  = new RA8876(Pin(GPIO_SSPI_CS),Pin(GPIO_SSPI_MOSI),Pin(GPIO_SSPI_MISO),Pin(GPIO_SSPI_SCLK),Pin(GPIO_BACKLIGHT));
     } else {
-      if (PinUsed(GPIO_SPI_CS) && (Pin(GPIO_SPI_MOSI)==13) && (Pin(GPIO_SPI_MISO)==12) && (Pin(GPIO_SPI_CLK)==14)) {
+      if (PinUsed(GPIO_SPI_CS) && (Pin(GPIO_SPI_MOSI)==HW_SPI_MOSI) && (Pin(GPIO_SPI_MISO)==HW_SPI_MISO) && (Pin(GPIO_SPI_CLK)==HW_SPI_CLK)) {
         ra8876  = new RA8876(Pin(GPIO_SPI_CS),Pin(GPIO_SPI_MOSI),Pin(GPIO_SPI_MISO),Pin(GPIO_SPI_CLK),Pin(GPIO_BACKLIGHT));
       } else {
         return;

From 88627a5a41a99e2ec53ec66942b93e27e01f6277 Mon Sep 17 00:00:00 2001
From: gemu2015 <gmutz2010@googlemail.com>
Date: Mon, 18 May 2020 10:25:18 +0200
Subject: [PATCH 2/4] support for jpeg pictures on color lcds

---
 tasmota/support_jpeg.ino    | 157 ++++++++++++++++++++++++++++++++++++
 tasmota/xdrv_13_display.ino | 122 +++++++++++++++++++++-------
 2 files changed, 249 insertions(+), 30 deletions(-)
 create mode 100644 tasmota/support_jpeg.ino

diff --git a/tasmota/support_jpeg.ino b/tasmota/support_jpeg.ino
new file mode 100644
index 000000000..7e811cd76
--- /dev/null
+++ b/tasmota/support_jpeg.ino
@@ -0,0 +1,157 @@
+/*
+  jpeg_utils.c - Version header file for Tasmota
+
+  Copyright (C) 2020  Theo Arends
+
+  This program is free software: you can redistribute it and/or modify
+  it under the terms of the GNU General Public License as published by
+  the Free Software Foundation, either version 3 of the License, or
+  (at your option) any later version.
+
+  This program is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+  GNU General Public License for more details.
+
+  You should have received a copy of the GNU General Public License
+  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
+#ifdef ESP32
+#ifdef JPEG_PICTS
+
+#include "img_converters.h"
+#include "esp_jpg_decode.h"
+
+void rgb888_to_565(uint8_t *in, uint16_t *out, uint32_t len) {
+uint8_t red, grn, blu;
+uint16_t b , g, r;
+
+  for (uint32_t cnt=0; cnt<len; cnt++) {
+    red = *in++;
+    grn = *in++;
+    blu = *in++;
+    b = (blu >> 3) & 0x1f;
+    g = ((grn >> 2) & 0x3f) << 5;
+    r = ((red >> 3) & 0x1f) << 11;
+    *out++ = (r | g | b);
+  }
+}
+
+typedef struct {
+        uint16_t width;
+        uint16_t height;
+        uint16_t data_offset;
+        const uint8_t *input;
+        uint8_t *output;
+} rgb_jpg_decoder;
+
+//input buffer
+static uint32_t _jpg_read(void * arg, size_t index, uint8_t *buf, size_t len)
+{
+    rgb_jpg_decoder * jpeg = (rgb_jpg_decoder *)arg;
+    if(buf) {
+        memcpy(buf, jpeg->input + index, len);
+    }
+    return len;
+}
+
+//output buffer and image width
+static bool _rgb_write(void * arg, uint16_t x, uint16_t y, uint16_t w, uint16_t h, uint8_t *data)
+{
+    rgb_jpg_decoder * jpeg = (rgb_jpg_decoder *)arg;
+    if(!data){
+        if(x == 0 && y == 0){
+            //write start
+            jpeg->width = w;
+            jpeg->height = h;
+            //if output is null, this is BMP
+            if(!jpeg->output){
+                jpeg->output = (uint8_t *)malloc((w*h*3)+jpeg->data_offset);
+                if(!jpeg->output){
+                    return false;
+                }
+            }
+        } else {
+            //write end
+        }
+        return true;
+    }
+
+    size_t jw = jpeg->width*3;
+    size_t t = y * jw;
+    size_t b = t + (h * jw);
+    size_t l = x * 3;
+    uint8_t *out = jpeg->output+jpeg->data_offset;
+    uint8_t *o = out;
+    size_t iy, ix;
+
+    w = w * 3;
+
+    for(iy=t; iy<b; iy+=jw) {
+        o = out+iy+l;
+        for(ix=0; ix<w; ix+= 3) {
+            o[ix] = data[ix+2];
+            o[ix+1] = data[ix+1];
+            o[ix+2] = data[ix];
+        }
+        data+=w;
+    }
+    return true;
+}
+
+
+esp_err_t esp_jpg_decode(size_t len, jpg_scale_t scale, jpg_reader_cb reader, jpg_writer_cb writer, void * arg);
+
+
+bool jpg2rgb888(const uint8_t *src, size_t src_len, uint8_t * out, jpg_scale_t scale)
+{
+    rgb_jpg_decoder jpeg;
+    jpeg.width = 0;
+    jpeg.height = 0;
+    jpeg.input = src;
+    jpeg.output = out;
+    jpeg.data_offset = 0;
+
+    if(esp_jpg_decode(src_len, scale, _jpg_read, _rgb_write, (void*)&jpeg) != ESP_OK){
+        return false;
+    }
+    return true;
+}
+
+// https://web.archive.org/web/20131016210645/http://www.64lines.com/jpeg-width-height
+//Gets the JPEG size from the array of data passed to the function, file reference: http://www.obrador.com/essentialjpeg/headerinfo.htm
+char get_jpeg_size(unsigned char* data, unsigned int data_size, unsigned short *width, unsigned short *height) {
+   //Check for valid JPEG image
+   int i=0;   // Keeps track of the position within the file
+   if(data[i] == 0xFF && data[i+1] == 0xD8 && data[i+2] == 0xFF && data[i+3] == 0xE0) {
+      i += 4;
+      // Check for valid JPEG header (null terminated JFIF)
+      if(data[i+2] == 'J' && data[i+3] == 'F' && data[i+4] == 'I' && data[i+5] == 'F' && data[i+6] == 0x00) {
+         //Retrieve the block length of the first block since the first block will not contain the size of file
+         unsigned short block_length = data[i] * 256 + data[i+1];
+         while(i<data_size) {
+            i+=block_length;               //Increase the file index to get to the next block
+            if(i >= data_size) return false;   //Check to protect against segmentation faults
+            if(data[i] != 0xFF) return false;   //Check that we are truly at the start of another block
+            if(data[i+1] == 0xC0) {            //0xFFC0 is the "Start of frame" marker which contains the file size
+               //The structure of the 0xFFC0 block is quite simple [0xFFC0][ushort length][uchar precision][ushort x][ushort y]
+               *height = data[i+5]*256 + data[i+6];
+               *width = data[i+7]*256 + data[i+8];
+               return true;
+            }
+            else
+            {
+               i+=2;                              //Skip the block marker
+               block_length = data[i] * 256 + data[i+1];   //Go to the next block
+            }
+         }
+         return false;                     //If this point is reached then no size was found
+      }else{ return false; }                  //Not a valid JFIF string
+
+   }else{ return false; }                     //Not a valid SOI header
+}
+
+#endif // JPEG_PICTS
+#endif //ESP32
diff --git a/tasmota/xdrv_13_display.ino b/tasmota/xdrv_13_display.ino
index e490d0bd1..2d0ef4f0f 100644
--- a/tasmota/xdrv_13_display.ino
+++ b/tasmota/xdrv_13_display.ino
@@ -1500,47 +1500,109 @@ void CmndDisplayRows(void)
 /*********************************************************************************************\
  * optional drivers
 \*********************************************************************************************/
+#ifdef ESP32
+#ifdef JPEG_PICTS
+#include "img_converters.h"
+#include "esp_jpg_decode.h"
+bool jpg2rgb888(const uint8_t *src, size_t src_len, uint8_t * out, jpg_scale_t scale);
+char get_jpeg_size(unsigned char* data, unsigned int data_size, unsigned short *width, unsigned short *height);
+void rgb888_to_565(uint8_t *in, uint16_t *out, uint32_t len);
+#endif
+#endif
+
 
 #if defined(USE_SCRIPT_FATFS) && defined(USE_SCRIPT)
+#define XBUFF_LEN 128
 void Draw_RGB_Bitmap(char *file,uint16_t xp, uint16_t yp) {
   if (!renderer) return;
-
-  //if (!strstr(file,".RGB")) return;
   File fp;
-  fp=SD.open(file,FILE_READ);
-  if (!fp) return;
-  uint16_t xsize;
-  fp.read((uint8_t*)&xsize,2);
-  uint16_t ysize;
-  fp.read((uint8_t*)&ysize,2);
+  char *ending = strrchr(file,'.');
+  if (!ending) return;
+  ending++;
+  char estr[8];
+  memset(estr,0,sizeof(estr));
+  for (uint32_t cnt=0; cnt<strlen(ending); cnt++) {
+    estr[cnt]=tolower(ending[cnt]);
+  }
 
+  if (!strcmp(estr,"rgb")) {
+    // special rgb format
+    fp=SD.open(file,FILE_READ);
+    if (!fp) return;
+    uint16_t xsize;
+    fp.read((uint8_t*)&xsize,2);
+    uint16_t ysize;
+    fp.read((uint8_t*)&ysize,2);
 #if 1
-#define XBUFF 128
-  uint16_t xdiv=xsize/XBUFF;
-  renderer->setAddrWindow(xp,yp,xp+xsize,yp+ysize);
-  for(int16_t j=0; j<ysize; j++) {
-    for(int16_t i=0; i<xsize; i+=XBUFF) {
-      uint16_t rgb[XBUFF];
-      uint16_t len=fp.read((uint8_t*)rgb,XBUFF*2);
-      if (len>=2) renderer->pushColors(rgb,len/2,true);
+    uint16_t xdiv=xsize/XBUFF_LEN;
+    renderer->setAddrWindow(xp,yp,xp+xsize,yp+ysize);
+    for(int16_t j=0; j<ysize; j++) {
+      for(int16_t i=0; i<xsize; i+=XBUFF_LEN) {
+        uint16_t rgb[XBUFF_LEN];
+        uint16_t len=fp.read((uint8_t*)rgb,XBUFF_LEN*2);
+        if (len>=2) renderer->pushColors(rgb,len/2,true);
+      }
+      OsWatchLoop();
     }
-    OsWatchLoop();
-  }
-  renderer->setAddrWindow(0,0,0,0);
+    renderer->setAddrWindow(0,0,0,0);
 #else
-  for(int16_t j=0; j<ysize; j++) {
-    for(int16_t i=0; i<xsize; i++ ) {
-      uint16_t rgb;
-      uint8_t res=fp.read((uint8_t*)&rgb,2);
-      if (!res) break;
-      renderer->writePixel(xp+i,yp,rgb);
+    for(int16_t j=0; j<ysize; j++) {
+      for(int16_t i=0; i<xsize; i++ ) {
+        uint16_t rgb;
+        uint8_t res=fp.read((uint8_t*)&rgb,2);
+        if (!res) break;
+        renderer->writePixel(xp+i,yp,rgb);
+      }
+      delay(0);
+      OsWatchLoop();
+      yp++;
     }
-    delay(0);
-    OsWatchLoop();
-    yp++;
-  }
 #endif
-  fp.close();
+    fp.close();
+  } else if (!strcmp(estr,"jpg")) {
+    // jpeg files on ESP32 with more memory
+#ifdef ESP32
+#ifdef JPEG_PICTS
+    if (psramFound()) {
+      fp=SD.open(file,FILE_READ);
+      if (!fp) return;
+      uint32_t size = fp.size();
+      uint8_t *mem = (uint8_t *)heap_caps_malloc(size+4, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
+      if (mem) {
+        uint8_t res=fp.read(mem, size);
+        if (res) {
+          uint16_t xsize;
+          uint16_t ysize;
+          if (mem[0]==0xff && mem[1]==0xd8) {
+            get_jpeg_size(mem, size, &xsize, &ysize);
+            Serial.printf(" x,y %d - %d\n",xsize, ysize );
+            if (xsize && ysize) {
+              uint8_t *out_buf = (uint8_t *)heap_caps_malloc((xsize*ysize*3)+4, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
+              if (out_buf) {
+                uint8_t *ob=out_buf;
+                jpg2rgb888(mem, size, out_buf, (jpg_scale_t)JPG_SCALE_NONE);
+                uint16_t pixels=xsize*ysize/XBUFF_LEN;
+                renderer->setAddrWindow(xp,yp,xp+xsize,yp+ysize);
+                for(int32_t j=0; j<pixels; j++) {
+                  uint16_t rbuff[XBUFF_LEN*2];
+                  rgb888_to_565(ob, rbuff, XBUFF_LEN);
+                  ob+=XBUFF_LEN*3;
+                  renderer->pushColors(rbuff,XBUFF_LEN,true);
+                  OsWatchLoop();
+                }
+                renderer->setAddrWindow(0,0,0,0);
+                free(out_buf);
+              }
+            }
+          }
+        }
+        free(mem);
+      }
+      fp.close();
+    }
+#endif // JPEG_PICTS
+#endif // ESP32
+  }
 }
 #endif
 

From 6ab98e5e169c8844e123f368bbedc95a26b0a7c6 Mon Sep 17 00:00:00 2001
From: Adrian Scillato <35405447+ascillato@users.noreply.github.com>
Date: Mon, 18 May 2020 09:45:17 -0300
Subject: [PATCH 3/4] Update Spanish Translation

---
 tasmota/language/es_ES.h | 52 ++++++++++++++++++++--------------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/tasmota/language/es_ES.h b/tasmota/language/es_ES.h
index 40b98f766..de021791e 100644
--- a/tasmota/language/es_ES.h
+++ b/tasmota/language/es_ES.h
@@ -28,7 +28,7 @@
  * Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
  * Use online command Prefix to translate cmnd, stat and tele.
  *
- * Updated until v8.1.0.1
+ * Updated until v8.3.0.2
 \*********************************************************************/
 
 #define LANGUAGE_MODULE_NAME         // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@@ -79,7 +79,7 @@
 #define D_DATA "Datos"
 #define D_DARKLIGHT "Oscuro"
 #define D_DEBUG "Debug"
-#define D_DEWPOINT "Dew point"
+#define D_DEWPOINT "Punto de Rocío"
 #define D_DISABLED "Deshabilitado"
 #define D_DISTANCE "Distancia"
 #define D_DNS_SERVER "Servidor DNS"
@@ -98,8 +98,8 @@
 #define D_FILE "Archivo"
 #define D_FLOW_RATE "Caudal"
 #define D_FREE_MEMORY "Memoria Libre"
-#define D_PSR_MAX_MEMORY "PS-RAM Memory"
-#define D_PSR_FREE_MEMORY "PS-RAM free Memory"
+#define D_PSR_MAX_MEMORY "Memoria PS-RAM"
+#define D_PSR_FREE_MEMORY "Memoria PS-RAM libre"
 #define D_FREQUENCY "Frecuencia"
 #define D_GAS "Gas"
 #define D_GATEWAY "Gateway"
@@ -140,7 +140,7 @@
 #define D_PROGRAM_SIZE "Tamaño Programa"
 #define D_PROJECT "Proyecto"
 #define D_RAIN "Lluvia"
-#define D_RANGE "Range"
+#define D_RANGE "Rango"
 #define D_RECEIVED "Recibido"
 #define D_RESTART "Reiniciar"
 #define D_RESTARTING "Reiniciando"
@@ -302,7 +302,7 @@
 #define D_OTHER_PARAMETERS "Otros parámetros"
 #define D_TEMPLATE "Plantilla"
 #define D_ACTIVATE "Activar"
-#define D_DEVICE_NAME "Device Name"
+#define D_DEVICE_NAME "Nombre de Dispositivo"
 #define D_WEB_ADMIN_PASSWORD "Clave Administrador Web"
 #define D_MQTT_ENABLE "Habilitar MQTT"
 #define D_FRIENDLY_NAME "Nombre Amigable"
@@ -780,27 +780,27 @@
 #define D_SCRIPT_UPLOAD_FILES  "Cargar Archivos"
 
 //xsns_67_as3935.ino
-#define D_AS3935_GAIN "gain:"
-#define D_AS3935_ENERGY "energy:"
-#define D_AS3935_DISTANCE "distance:"
-#define D_AS3935_DISTURBER "disturber:"
+#define D_AS3935_GAIN "Ganancia:"
+#define D_AS3935_ENERGY "Energía:"
+#define D_AS3935_DISTANCE "Distancia:"
+#define D_AS3935_DISTURBER "Perturbancia:"
 #define D_AS3935_VRMS "µVrms:"
-#define D_AS3935_APRX "aprx.:"
-#define D_AS3935_AWAY "away"
-#define D_AS3935_LIGHT "lightning"
-#define D_AS3935_OUT "lightning out of range"
-#define D_AS3935_NOT "distance not determined"
-#define D_AS3935_ABOVE "lightning overhead"
-#define D_AS3935_NOISE "noise detected"
-#define D_AS3935_DISTDET "disturber detected"
-#define D_AS3935_INTNOEV "Interrupt with no Event!"
-#define D_AS3935_NOMESS "listening..."
-#define D_AS3935_ON "On"
-#define D_AS3935_OFF "Off"
-#define D_AS3935_INDOORS "Indoors"
-#define D_AS3935_OUTDOORS "Outdoors"
-#define D_AS3935_CAL_FAIL "calibration failed"
-#define D_AS3935_CAL_OK "calibration set to:"
+#define D_AS3935_APRX "aprox.:"
+#define D_AS3935_AWAY "lejos"
+#define D_AS3935_LIGHT "Relámpagos"
+#define D_AS3935_OUT "Relámpagos fuera de rango"
+#define D_AS3935_NOT "Distancia no determinada"
+#define D_AS3935_ABOVE "Relámpagos cercanos"
+#define D_AS3935_NOISE "Ruido detectado"
+#define D_AS3935_DISTDET "Perturbancia detectada"
+#define D_AS3935_INTNOEV "Interrupción sin evento!"
+#define D_AS3935_NOMESS "Escuchando..."
+#define D_AS3935_ON "Encendido"
+#define D_AS3935_OFF "Apagado"
+#define D_AS3935_INDOORS "Dentro de casa"
+#define D_AS3935_OUTDOORS "Al aire libre"
+#define D_AS3935_CAL_FAIL "Falló calibración"
+#define D_AS3935_CAL_OK "Calibración a:"
 
 //xsns_68_opentherm.ino
 #define D_SENSOR_BOILER_OT_RX   "OpenTherm RX"

From 769f69d049bad50c92bb755503ac2cc0d5d34915 Mon Sep 17 00:00:00 2001
From: gemu2015 <gmutz2010@googlemail.com>
Date: Mon, 18 May 2020 15:02:27 +0200
Subject: [PATCH 4/4] remove debug print

---
 tasmota/xdrv_13_display.ino | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tasmota/xdrv_13_display.ino b/tasmota/xdrv_13_display.ino
index 2d0ef4f0f..d2466d051 100644
--- a/tasmota/xdrv_13_display.ino
+++ b/tasmota/xdrv_13_display.ino
@@ -1575,7 +1575,7 @@ void Draw_RGB_Bitmap(char *file,uint16_t xp, uint16_t yp) {
           uint16_t ysize;
           if (mem[0]==0xff && mem[1]==0xd8) {
             get_jpeg_size(mem, size, &xsize, &ysize);
-            Serial.printf(" x,y %d - %d\n",xsize, ysize );
+            //Serial.printf(" x,y %d - %d\n",xsize, ysize );
             if (xsize && ysize) {
               uint8_t *out_buf = (uint8_t *)heap_caps_malloc((xsize*ysize*3)+4, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
               if (out_buf) {