diff --git a/lib/lib_display/Arduino_ST7789-gemu-1.0/Arduino_ST7789.cpp b/lib/lib_display/Arduino_ST7789-gemu-1.0/Arduino_ST7789.cpp
index f45b33095..74837242b 100644
--- a/lib/lib_display/Arduino_ST7789-gemu-1.0/Arduino_ST7789.cpp
+++ b/lib/lib_display/Arduino_ST7789-gemu-1.0/Arduino_ST7789.cpp
@@ -27,7 +27,7 @@ uint16_t Arduino_ST7789::GetColorFromIndex(uint8_t index) {
 }
 
 static const uint8_t PROGMEM
-  cmd_240x240[] = {                 		// Initialization commands for 7789 screens
+  init_cmd[] = {                 		    // Initialization commands for 7789 screens
     10,                       				// 9 commands in list:
     ST7789_SWRESET,   ST_CMD_DELAY,  		// 1: Software reset, no args, w/delay
       150,                     				// 150 ms delay
@@ -38,14 +38,6 @@ static const uint8_t PROGMEM
       10,                     				// 10 ms delay
     ST7789_MADCTL , 1,  					// 4: Memory access ctrl (directions), 1 arg:
       0x00,                   				// Row addr/col addr, bottom to top refresh
-    ST7789_CASET  , 4,  					// 5: Column addr set, 4 args, no delay:
-      0x00, ST7789_240x240_XSTART,          // XSTART = 0
-	  (ST7789_TFTWIDTH+ST7789_240x240_XSTART) >> 8,
-	  (ST7789_TFTWIDTH+ST7789_240x240_XSTART) & 0xFF,   // XEND = 240
-    ST7789_RASET  , 4,  					// 6: Row addr set, 4 args, no delay:
-      0x00, ST7789_240x240_YSTART,          // YSTART = 0
-      (ST7789_TFTHEIGHT+ST7789_240x240_YSTART) >> 8,
-	  (ST7789_TFTHEIGHT+ST7789_240x240_YSTART) & 0xFF,	// YEND = 240
     ST7789_INVON ,   ST_CMD_DELAY,  		// 7: Inversion ON
       10,
     ST7789_NORON  ,   ST_CMD_DELAY,  		// 8: Normal display on, no args, w/delay
@@ -75,7 +67,7 @@ inline uint16_t swapcolor(uint16_t x) {
 
 // Constructor when using software SPI.  All output pins are configurable.
 Arduino_ST7789::Arduino_ST7789(int8_t dc, int8_t rst, int8_t sid, int8_t sclk, int8_t cs, int8_t bp)
-  : Renderer(ST7789_TFTWIDTH, ST7789_TFTHEIGHT)
+  : Renderer(_width, _height)
 {
   _cs   = cs;
   _dc   = dc;
@@ -91,7 +83,7 @@ Arduino_ST7789::Arduino_ST7789(int8_t dc, int8_t rst, int8_t sid, int8_t sclk, i
 // Constructor when using hardware SPI.  Faster, but must use SPI pins
 // specific to each board type (e.g. 11,13 for Uno, 51,52 for Mega, etc.)
 Arduino_ST7789::Arduino_ST7789(int8_t dc, int8_t rst, int8_t cs, int8_t bp)
-  : Renderer(ST7789_TFTWIDTH, ST7789_TFTHEIGHT) {
+  : Renderer(_width, _height) {
   _cs   = cs;
   _dc   = dc;
   _rst  = rst;
@@ -335,29 +327,59 @@ void Arduino_ST7789::setRotation(uint8_t m) {
    case 0:
      writedata(ST7789_MADCTL_MX | ST7789_MADCTL_MY | ST7789_MADCTL_RGB);
 
-     _xstart = _colstart;
-    // _ystart = _rowstart;
-     _ystart = 80;
+     _xstart = 0;
+     _ystart = 0;
+     if (_width==240 && _height==240) {
+       _xstart = ST7789_240x240_XSTART_R0;
+       _ystart = ST7789_240x240_YSTART_R0;
+     }
+     if (_width==135 && _height==240) {
+       _xstart = ST7789_135x240_XSTART_R0;
+       _ystart = ST7789_135x240_YSTART_R0;
+     }
      break;
    case 1:
      writedata(ST7789_MADCTL_MY | ST7789_MADCTL_MV | ST7789_MADCTL_RGB);
 
-     _ystart = _colstart;
-    // _xstart = _rowstart;
-     _xstart = 80;
+     _ystart = 0;
+     _xstart = 0;
+     if (_width==240 && _height==240) {
+       _xstart = ST7789_240x240_XSTART_R1;
+       _ystart = ST7789_240x240_YSTART_R1;
+     }
+     if (_width==240 && _height==135) {
+       _xstart = ST7789_135x240_XSTART_R1;
+       _ystart = ST7789_135x240_YSTART_R1;
+     }
      break;
   case 2:
      writedata(ST7789_MADCTL_RGB);
 
-     _xstart = _colstart;
-     _ystart = _rowstart;
+     _xstart = 0;
+     _ystart = 0;
+     if (_width==240 && _height==240) {
+       _xstart = ST7789_240x240_XSTART_R2;
+       _ystart = ST7789_240x240_YSTART_R2;
+     }
+     if (_width==135 && _height==240) {
+       _xstart = ST7789_135x240_XSTART_R2;
+       _ystart = ST7789_135x240_YSTART_R2;
+     }
      break;
 
    case 3:
      writedata(ST7789_MADCTL_MX | ST7789_MADCTL_MV | ST7789_MADCTL_RGB);
 
-     _ystart = _colstart;
-     _xstart = _rowstart;
+     _xstart = 0;
+     _ystart = 0;
+     if (_width==240 && _height==240) {
+       _xstart = ST7789_240x240_XSTART_R3;
+       _ystart = ST7789_240x240_YSTART_R3;
+     }
+     if (_width==240 && _height==135) {
+       _xstart = ST7789_135x240_XSTART_R3;
+       _ystart = ST7789_135x240_YSTART_R3;
+     }
      break;
   }
 }
@@ -533,12 +555,10 @@ inline void Arduino_ST7789::DC_LOW(void) {
 void Arduino_ST7789::init(uint16_t width, uint16_t height) {
   commonInit(NULL);
 
-  _colstart = ST7789_240x240_XSTART;
-  _rowstart = ST7789_240x240_YSTART;
   _height = height;
   _width = width;
 
-  displayInit(cmd_240x240);
+  displayInit(init_cmd);
 
   setRotation(2);
 
diff --git a/lib/lib_display/Arduino_ST7789-gemu-1.0/Arduino_ST7789.h b/lib/lib_display/Arduino_ST7789-gemu-1.0/Arduino_ST7789.h
index 2d97346e7..3dfaa03a8 100644
--- a/lib/lib_display/Arduino_ST7789-gemu-1.0/Arduino_ST7789.h
+++ b/lib/lib_display/Arduino_ST7789-gemu-1.0/Arduino_ST7789.h
@@ -39,11 +39,23 @@
 
 //#define SPI_HAS_TRANSACTION // already defined in SPI.h
 
-#define ST7789_TFTWIDTH 	240
-#define ST7789_TFTHEIGHT 	240
+#define ST7789_240x240_XSTART_R0 0
+#define ST7789_240x240_YSTART_R0 80
+#define ST7789_240x240_XSTART_R1 80
+#define ST7789_240x240_YSTART_R1 0
+#define ST7789_240x240_XSTART_R2 0
+#define ST7789_240x240_YSTART_R2 0
+#define ST7789_240x240_XSTART_R3 0
+#define ST7789_240x240_YSTART_R3 0
 
-#define ST7789_240x240_XSTART 0
-#define ST7789_240x240_YSTART 0
+#define ST7789_135x240_XSTART_R0 53
+#define ST7789_135x240_YSTART_R0 40
+#define ST7789_135x240_XSTART_R1 40
+#define ST7789_135x240_YSTART_R1 52
+#define ST7789_135x240_XSTART_R2 52
+#define ST7789_135x240_YSTART_R2 40
+#define ST7789_135x240_XSTART_R3 40
+#define ST7789_135x240_YSTART_R3 53
 
 #define ST_CMD_DELAY   0x80    // special signifier for command lists
 
diff --git a/tasmota/xdsp_12_ST7789.ino b/tasmota/xdsp_12_ST7789.ino
index 3c85f168a..1c9ec1aff 100644
--- a/tasmota/xdsp_12_ST7789.ino
+++ b/tasmota/xdsp_12_ST7789.ino
@@ -64,11 +64,11 @@ void ST7789_InitDriver()
 
   if (XDSP_12 == Settings.display_model) {
 
-    if (Settings.display_width != ST7789_TFTWIDTH) {
-      Settings.display_width = ST7789_TFTWIDTH;
+    if (!Settings.display_width) {
+      Settings.display_width = 240;
     }
-    if (Settings.display_height != ST7789_TFTHEIGHT) {
-      Settings.display_height = ST7789_TFTHEIGHT;
+    if (!Settings.display_height) {
+      Settings.display_height = 240;
     }
 
     // disable screen buffer
@@ -130,9 +130,15 @@ void ST7789_InitDriver()
 
 #ifdef SHOW_SPLASH
     // Welcome text
-    renderer->setTextFont(2);
     renderer->setTextColor(ST7789_WHITE,ST7789_BLACK);
-    renderer->DrawStringAt(30, 100, "ST7789 TFT!", ST7789_WHITE,0);
+    int fontSize = 2;
+    renderer->setTextFont(2);
+    if (Settings.display_width<240) {
+        fontSize = 1;
+    }
+    renderer->setTextFont(fontSize);
+    int fontHeight = 12 * fontSize;
+    renderer->DrawStringAt(30, (Settings.display_height-fontHeight)/2, "ST7789 TFT!", ST7789_WHITE,0);
     delay(1000);
 #endif