diff --git a/lib/lib_rf/RadioLib/src/ArduinoHal.cpp b/lib/lib_rf/RadioLib/src/ArduinoHal.cpp
index 9c5fd571a..3f7c0c9de 100644
--- a/lib/lib_rf/RadioLib/src/ArduinoHal.cpp
+++ b/lib/lib_rf/RadioLib/src/ArduinoHal.cpp
@@ -189,7 +189,8 @@ void inline ArduinoHal::noTone(uint32_t pin) {
 
 void inline ArduinoHal::yield() {
   #if !defined(RADIOLIB_YIELD_UNSUPPORTED)
-  ::yield();
+//  ::yield();
+  ::delay(0);
   #endif
 }
 
diff --git a/lib/lib_rf/RadioLib/src/Module.cpp b/lib/lib_rf/RadioLib/src/Module.cpp
index 18b675f43..c46e26e9c 100644
--- a/lib/lib_rf/RadioLib/src/Module.cpp
+++ b/lib/lib_rf/RadioLib/src/Module.cpp
@@ -289,8 +289,7 @@ int16_t Module::SPItransferStream(uint8_t* cmd, uint8_t cmdLen, bool write, uint
   } else {
     uint32_t start = this->hal->millis();
     while(this->hal->digitalRead(this->gpioPin)) {
-//      this->hal->yield();
-      this->hal->delay(0);
+      this->hal->yield();
       if(this->hal->millis() - start >= timeout) {
         RADIOLIB_DEBUG_BASIC_PRINTLN("GPIO pre-transfer timeout, is it connected?");
         #if !RADIOLIB_STATIC_ONLY
@@ -317,8 +316,7 @@ int16_t Module::SPItransferStream(uint8_t* cmd, uint8_t cmdLen, bool write, uint
       this->hal->delayMicroseconds(1);
       uint32_t start = this->hal->millis();
       while(this->hal->digitalRead(this->gpioPin)) {
-//        this->hal->yield();
-        this->hal->delay(0);
+        this->hal->yield();
         if(this->hal->millis() - start >= timeout) {
           RADIOLIB_DEBUG_BASIC_PRINTLN("GPIO post-transfer timeout, is it connected?");
           #if !RADIOLIB_STATIC_ONLY
@@ -391,13 +389,11 @@ void Module::waitForMicroseconds(uint32_t start, uint32_t len) {
   }
   this->TimerFlag = false;
   while(!this->TimerFlag) {
-//    this->hal->yield();
-    this->hal->delay(0);
+    this->hal->yield();
   }
   #else
    while(this->hal->micros() - start < len) {
-//    this->hal->yield();
-    this->hal->delay(0);
+    this->hal->yield();
   }
   #endif
 }
diff --git a/lib/lib_rf/RadioLib/src/modules/SX126x/SX126x.cpp b/lib/lib_rf/RadioLib/src/modules/SX126x/SX126x.cpp
index 2e6b99b10..161a52453 100644
--- a/lib/lib_rf/RadioLib/src/modules/SX126x/SX126x.cpp
+++ b/lib/lib_rf/RadioLib/src/modules/SX126x/SX126x.cpp
@@ -256,8 +256,7 @@ int16_t SX126x::transmit(uint8_t* data, size_t len, uint8_t addr) {
   // wait for packet transmission or timeout
   uint32_t start = this->mod->hal->micros();
   while(!this->mod->hal->digitalRead(this->mod->getIrq())) {
-//    this->mod->hal->yield();
-    this->mod->hal->delay(0);
+    this->mod->hal->yield();
     if(this->mod->hal->micros() - start > timeout) {
       finishTransmit();
       return(RADIOLIB_ERR_TX_TIMEOUT);
@@ -308,8 +307,7 @@ int16_t SX126x::receive(uint8_t* data, size_t len) {
   bool softTimeout = false;
   uint32_t start = this->mod->hal->micros();
   while(!this->mod->hal->digitalRead(this->mod->getIrq())) {
-//    this->mod->hal->yield();
-    this->mod->hal->delay(0);
+    this->mod->hal->yield();
     // safety check, the timeout should be done by the radio
     if(this->mod->hal->micros() - start > timeout) {
       softTimeout = true;
@@ -442,8 +440,7 @@ int16_t SX126x::scanChannel(uint8_t symbolNum, uint8_t detPeak, uint8_t detMin)
 
   // wait for channel activity detected or timeout
   while(!this->mod->hal->digitalRead(this->mod->getIrq())) {
-//    this->mod->hal->yield();
-    this->mod->hal->delay(0);
+    this->mod->hal->yield();
   }
 
   // check CAD result
@@ -571,8 +568,7 @@ int16_t SX126x::startTransmit(uint8_t* data, size_t len, uint8_t addr) {
 
   // wait for BUSY to go low (= PA ramp up done)
   while(this->mod->hal->digitalRead(this->mod->getGpio())) {
-//    this->mod->hal->yield();
-    this->mod->hal->delay(0);
+    this->mod->hal->yield();
   }
 
   return(state);
@@ -2119,8 +2115,7 @@ int16_t SX126x::config(uint8_t modem) {
   // wait for calibration completion
   this->mod->hal->delay(5);
   while(this->mod->hal->digitalRead(this->mod->getGpio())) {
-//    this->mod->hal->yield();
-    this->mod->hal->delay(0);
+    this->mod->hal->yield();
   }
 
   // check calibration result
diff --git a/lib/lib_rf/RadioLibTasmotaAlert.md b/lib/lib_rf/RadioLibTasmotaAlert.md
index b820680a0..3ffb450e7 100644
--- a/lib/lib_rf/RadioLibTasmotaAlert.md
+++ b/lib/lib_rf/RadioLibTasmotaAlert.md
@@ -4,8 +4,13 @@ Action to take in case of new release of RadioLib
 
 20240327
 
-1 - Remove folder `RadioLib\examples\NonArduino` (Fixes Github vulnerability alerts)
-2 - Change in file `RadioLib\src\modules\SX126x\SX126x.cpp` all occurences of ``this->mod->hal->yield();`` into ``this->mod->hal->delay(0);`` (Fixes ESP8266 Panic core_esp8266_main.cpp:133 __yield)
-3 - Change in file `RadioLib\src\Module.cpp` all occurences of ``this->hal->yield();`` into ``this->hal->delay(0);`` (Fixes ESP8266 Panic core_esp8266_main.cpp:133 __yield)
-
-
+1 - Remove folder `\lib\lib_rfRadioLib\examples\NonArduino` (Fixes Github vulnerability alerts)
+2 - Change in file `\lib\lib_rf\RadioLib\src\ArduinoHal.cpp` below function (Fixes ESP8266 Panic core_esp8266_main.cpp:133 __yield)
+```
+void inline ArduinoHal::yield() {
+  #if !defined(RADIOLIB_YIELD_UNSUPPORTED)
+//  ::yield();
+  ::delay(0);
+  #endif
+}
+```