Commit Graph

225 Commits

Author SHA1 Message Date
arendst d66ef2347e v5.11.1f - Revert chunks (#1706)
5.11.1f
 * Revert chunked webserver pages as it fails on many browsers
due to chunks being too small (#1706)
 * Reduce initial console weblog
from 20 to 13 lines due to memory constraints
2018-01-26 15:21:57 +01:00
arendst 2cac51619c v5.11.1e Fixes new commands
5.11.1e
 * Replaced command Ina219Mode with command Sensor13
 * Add
command Sensor15 2 to start MHZ19(B) Zero Point Calibration
 * Add
chunked webserver pages for large pages saving memory
 * Fix Non-English
JSON temperature unit attachement
 * Fix Sonoff Pow Energy Today and
Energy Total reading after restart (#1648)
 * Rewrite function pointers
to save code space and memory (#1683)
 * Add option define
HOME_ASSISTANT_DISCOVERY_ENABLE in user_config.h (#1685)
 * Fix SOnoff
Pow Energy Period roll-over (#1688)
2018-01-24 17:31:20 +01:00
arendst c14234394a v5.11.1d - Add command State and fixes
5.11.1d
 * Add locale Decimal Separator to Web sensor page
 * Add
command State to retrieve device state information (same data as
teleperiod state and status 11 in slightly different JSON format)
 *
Extent state information with Light parameters
 * Fix IRSend parameter
translation (#1636)
 * Add optional login to Webserver AP mode (#1587,
#1635)
 * Fix BME680 teleperiod resistance measuring (#1647)
2018-01-20 12:12:39 +01:00
arendst 1538d30c96 v5.11.1c - Fixes and experimental Hass Discovery
5.11.1c
 * Make command color parameter input less strict to ease Hass
support
 * Add ColorTemperature to light status message
 * Change
PubSubClient.h define MQTT_MAX_PACKET_SIZE from 512 to 1000 for Hass
support
 * Make define MESSZ dependent on PubSubClient.h define
MQTT_MAX_PACKET_SIZE
 * Fix logging line length around 400 characters
 *
Change module name Wemos D1 mini into Generic (#1220)
 * Revert HTML
change from width=100% to style=width:100% supporting HTML5 (#1358)
 *
Add experimental (still Hass python exceptions) Home Assistant Discovery
for switch and light to be enabled by command SetOption19 1 (#1534)
 *
Updated French Translation (#1561)
 * Fix DS18B20 temperature JSON
decimal dot (#1561)
 * Add Spanish language file (#1589)
 * Update
Italian Language file (#1594)
 * Consolidate WIFI_MANAGER_SEC into
WIFI_CONFIG_SEC (#1616)
 * Fix Energy JSON message (#1621)
2018-01-18 16:19:28 +01:00
arendst 4fba6f2758 v5.11.1b - Several fixes and French languga
5.11.1b
 * Add command PowerOnState option 5 which inverts PulseTime and
allows for delayed always on after power on
 * Changed
OSWATCH_RESET_TIME (Blocked loop) from 30 to 120 seconds to allow slow
networks (#1556)
 * Add French language file (#1561)
 * Fix truncated
command names and wrong response for DomoticzSwitchIdx (#1571)
 * Add
HTTP Allow Cross Origin removed from ESP8266/Arduino 2.4.0 (#1572)
 *
Fix %-sign issue as printf escape character in Humidity and Sonoff SC
(#1579)
2018-01-13 15:53:02 +01:00
arendst f4f4039599 v5.11.1a
Align with master
2018-01-08 11:44:18 +01:00
arendst c1083c6e1c v5.11.0a
Align with master
2018-01-07 14:56:23 +01:00
arendst b583bc48f4 v5.10.0j - MQTT/JSON language consolidation complete
5.10.0j
 * Allow conditional code based on core version
 * Removed all
MQTT, JSON and Command language defines from locale files (#1473)
2018-01-06 17:34:42 +01:00
arendst 349230de72 v5.10.0i - Fixes and rearrangements
5.10.0i
 * Add device function pointers
 * Moved Command and JSON
English language defines to one file (i18n.h)
 * Update it-IT.h language
file (#1449)
 * Fix Wemo and Hue emulation by adding M-Search response
delay (#1486)
2018-01-05 12:26:19 +01:00
arendst b1585e8113 5.10.0h - Fix Wemo Emulation (#1486)
5.10.0h
 * Fix Wemo Emulation for Gen 2 devices (#1486)
2018-01-02 16:08:27 +01:00
arendst 24a6960749 v5.10.0g - Alexa 2nd Gen support
5.10.0g
 * Add 2nd Gen Alexa support to Wemo emulation discovery (#1357,
#1450)
2017-12-30 12:47:19 +01:00
arendst 5639b6d966 v5.10.0f
5.10.0f
 * Differentiate between JSON text defines and other text
defines to allow for English JSON while using different locale (#1449)

* Fix display of build date and time in non-english locale (#1465)
2017-12-29 14:35:05 +01:00
arendst 20619ac41b v5.10.0e
5.10.0e
 * Add Italian language file (#1449)
 * Fix Wemo Emulation once
again closest to issue (#1357)
2017-12-28 13:43:51 +01:00
arendst 122b2a610c v5.10.0d
5.10.0d
 * Renamed commands Color2,3,4 to Color3,4,5
 * Add command
Color2 to set color while keeping same dimmer value
 * Add led signal to
Carbon Dioxide (CO2) sensors (see user_config.h)
 * Fix Wemo Emulation
again (#1357)
 * Updated German translation (#1438)
2017-12-27 14:10:55 +01:00
arendst 67d8fa0d64 v5.10.0c
5.10.0c
 * Consolidate device serial (MH-Z19, SenseAir and Pzem004T)
into TasmotaSerial library
 * Consolidate PWM device recognition
 * Fix
Wemo Emulation (#1357)
 * Add support for Arilux LC06 (#1414)
2017-12-25 17:41:12 +01:00
arendst f9ce916e0b v5.10.0b - Add PZEM004T support
5.10.0b
 * Change Sonoff Pow Energy MQTT data JSON message and
consolidate Status 8 into Status 10
 * Add optional support for PZEM004T
energy sensor to enable with define USE_PZEM004T in user_config.h (#614)
2017-12-16 15:51:45 +01:00
arendst 7117179c1d v5.10.0a Add sensor SHT3X
5.10.0a
 * Add (experimental) support for sensor SHT3x
2017-12-01 15:59:53 +01:00
arendst 0f531e24e5 v5.9.1j - Add Dual R2, Rewrite DS18x20 and fixes
5.9.1j
 * Revert changes to xsns_05_ds18x20.ino and rename to
xsns_05_ds18x20_legacy.ino still needing library OneWire and providing
legacy JSON message:
 *
"DS18x20":{"DS1":{"Type":"DS18B20","Address":"284CC48E04000079","Temperature":19.5},"DS2":{"Type":"DS18B20","Address":"283AC28304000052","Temperature":19.6}}

* Add new xdrv_05_ds18x20.ino free from library OneWire and add the
following features:
 *  Add support for DS1822
 *  Add forced setting of
12-bit resolution for selected device types (#1222)
 *  Add read
temperature retry counter (#1215)
 *  Fix lost sensors by performing
sensor probe at restart only thereby removing dynamic sensor probe
(#1215)
 *  Fix sensor address sorting using ascending sort on sensor
type followed by sensor address
 *  Rewrite JSON resulting in shorter
message allowing more sensors in default firmware image:
 *
"DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}

* Add additional define in user_config.h to select either single sensor
(defines disabled), new multi sensor (USE_DS18X20) or legacy multi
sensor (USE_DS18X20_LEGACY)
 * Add support for Sonoff Dual R2 (#1249)
 *
Fix ADS1115 detection (#1258)
2017-11-27 17:46:51 +01:00
arendst 512566c727 v5.9.1i - Rewrite DS18x20 sensor code
5.9.1i
 * Fix Arilux LC11 restart exception 0 after OTA upgrade
 *
Disabled CRC lookup-table in OneWire.h (#define ONEWIRE_CRC8_TABLE 0) to
save some code space
 * Rewrite xsns_05_ds18x20.ino adding support for
DS1822, correct address calculation and force setting 12-bit resolution
(#1222)
 * DS18x20 sensor reconfiguration now only probed at restart
removing dynamic connection and intermittent sensor loss (#1215)
2017-11-24 17:26:20 +01:00
arendst 869aa4d6fb v5.9.1h - Add switchmode 7
5.9.1h
 * Patch library I2Cdevlib-Core for esp8266-core 2.4.0-rc2
 * Add
option PUSHBUTTON_TOGGLE (SwitchMode 7) to allow toggling on any switch
change (#1221)
 * Fix DHT sensor timeout recognition by distinguish
"signal already there" from "timeout" (#1233)
2017-11-22 15:34:07 +01:00
arendst 8366ee116a v5.9.1g - Add Pow Energy set and Clock tuning
5.9.1g
 * Fix typo ALIRFRCV into ARIRFRCV
 * Add nicer clock support for
larger hand widths
 * Add better clock support for different pixel
counts (#1226)
 * Remove command EnergyReset 1..3
 * Add commands
EnergyReset1 0..42500, EnergyReset2 0..42500 and EnergyReset3
0..42500000
 *  to (Re)set Energy Today, Yesterday or Total respectively
in Wh (#406, #685, #1202)
 * Add SettingsSaveAll routine to command
SaveData to be used before controlled power down (#1202)
2017-11-21 16:06:51 +01:00
arendst 299bed1c05 v5.9.1f - Update libraries and a fix
5.9.1f
 * Upgrade library ArduinoJson to 5.11.2
 * Upgrade library
IRRemoteEsp8266 to 2.2.1 + 2 commits but tweaked some protocols to keep
code usage small
 * Upgrade library NeoPixelBus to 2.2.9
 * Upgrade
library OneWire to 2.3.3 + 6 commits
 * Formalize library PubSubClient
to 2.6 + 9 commits and additional delay
 * Add optional ADS1115 driver
as alternative for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2
 *
Fix wrong response name for command HlwISet (#1214)
2017-11-19 18:02:03 +01:00
arendst 9c74a4a041 v5.9.1e - Fixes and Additions
5.9.1e
 * Add + (plus) and - (minus) to command color to select 1 out of
12 preset colors
 * Add + (plus) and - (minus) to command ct to control
ColdWarm led ColorTemperature (+34/-34)
 * Tune Arilux RF code
 * Fix
possible iram1_0_seg compile error by shrinking ICACHE_RAM_ATTR code
 *
Update core_esp8266_wiring_digital.c to latest (staged) level
 *
Workaround Sonoff Bridge Learn Mode hang caused by unrecognised RF code
(#1181)
 * Fix blank console log window by using XML character encoding
(#1187)
2017-11-17 17:52:31 +01:00
arendst db4a3a4a1e v5.9.1d - Add Arilux LC11 support
5.9.1d
 * Add support for Arilux LC11 (CLearing RF home code when
selecting no Arilux module)
 * Add fixed color options 1..12 to command
Color
 * Add + (plus) and - (minus) to commands Dimmer (+10/-10), Speed
and Scheme
2017-11-15 23:07:45 +01:00
arendst 39d30328e4 v5.9.1c - Add support for WS2812 RGBW
5.9.1c
 * Add support for WS2812 RGBW ledstrips to be enabled in
user_config.h with define USE_WS2812_CTYPE (#1156)
2017-11-11 16:02:18 +01:00
arendst 83a9c0693a v5.9.1b - Add INA219 support
5.9.1b
 * Remove spaces in JSON messages
 * Add support for INA219
Voltage and Current sensor to be enabled in user_config.h
2017-11-11 12:33:30 +01:00
arendst 7098d058b1 v5.9.1a - Fix PWM Watchdog Timeout
5.9.1a
 * Fix PWM watchdog timeout if Dimmer is set to 100 or Color set
to 0xFF (#1146)
2017-11-08 11:57:16 +01:00
arendst 19533cc995 v5.9.0b - Fixes and add ADS1115 A/D converter
5.9.0b
 * Add support for ADS1115 to be enabled in user_config.h and
needs libraries i2cdevlib-Core and i2cdevlib-ADS1115 (#338, #660)
 * Fix
Exception 26 and empty console screen after usage of command
WakeupDuration (#1133)
 * Fix some changed iTead web links in README.md
(#1137)
2017-11-07 15:57:24 +01:00
arendst 68cdc6130c v5.9.0a - Add Sensor Service and Fix config download
5.9.0a
* Add external sensor function pointer interface to enable easy sensor
addition
* Fix Backup Configuration file download failure by defining proper file
size (#1115)
2017-11-03 18:07:25 +01:00
arendst ebe642c995 v5.8.0q Fixes and Shrinking code
5.8.0q
 * Shrink code by 4k using command lookup tables
 * Add retry
counter to DHT11/21/22 sensors (#1082)
 * Add commands RfSync, RfLow,
RfHigh, RfHost and RfCode to allow sending custom RF codes (#1001)
2017-10-29 18:18:46 +01:00
arendst ae12b958cd v5.8.0p - Prep for release
5.8.0p
 * Fix initial PwmFrequency and PwmRange
 * Add support for
Arilux AL-LC01 RGB Led controller (#370)
 * Add light turn Off Fade
(#925)
 * Change IrSend Panasonic command to IrSend
{"Protocol":"Panasonic", "Bits":16388, "Data":<Panasonic data>}
 *
where 16388 is 0x4004 hexadecimal (#1014)
2017-10-26 16:33:33 +02:00
arendst cf350dc584 v5.8.0o - Add VEML6070 and more light schemes
5.8.0o
 * Remove max string length of 14 for Domoticz sensor
descriptions
 * Add light scheme options (Color cycle Up, Down, Random)
and moving WS2812 schemes up by 3
 * Add support for VEML6070 I2C Ultra
Violet level sensor (#1053)
2017-10-25 14:27:30 +02:00
arendst 1296432da2 v5.8.0n - Add language, device and clock commands
5.8.0n
 * Fix minimum TelePeriod of 10 seconds set by web page
 * Shrink
information web page by 1k code space
 * Removed Arduino IDE version too
low warning as it interferes with platformio.ini platform =
espressif8266_stage
 * Add commands Color2, Color3, Color4, Width2,
Width3, Width4 and SetOption16 to set Ws2812 Clock parameters (#1019)
 *
Add Polish language file (#1044, #1047)
 * Add support for KMC 70011
Power Monitoring Smart Plug (#1045)
 * Corrected German language file
(#1054)
2017-10-23 12:18:15 +02:00
arendst fc89330056 v5.8.0m - Rewrite and Additions
5.8.0m
 * Rewrite code (partly) using Google C++ Style Guide
(https://google.github.io/styleguide/cppguide.html)
 * Allow empty
MqttHost name by using option 0
 * Allow Mqtt server mDNS lookup only
when MqttHost name is empty (#1026)
 * Change Ws2812 clock with more
flexible version (#1019)
 * Add German language file (#1022)
 * Support
connecting to MQTT brokers without userid and/or password (#1023)
 * Add
commands PwmRange 1,255..1023 and PwmFrequency 1,100..4000 (#1025)
2017-10-18 18:22:34 +02:00
arendst 66d9ff14ac v5.8.0l - Update module config webpage
5.8.0l
* Update HTML/CSS to enable nicer form field entry
* Fix inverted relay status after restart or power on as regression from
5.8.0d (#909)
* Add send protocol Panasonic to IRsend (#1014)
* Fix relay power control when light power control is also configured as
regression from 5.8.0 (#1016)
2017-10-14 11:26:49 +02:00
arendst 804bd8fb53 v5.8.0k - Add support for 8 relays
5.8.0k
 * Add support for up to 8 relays (#995)
 * Fix Blocked Loop when
erasing large flash using command reset 2 (#1002)
2017-10-12 11:29:40 +02:00
arendst ca431184e6 v5.8.0j - Fixes and Prep for more relays
5.8.0j
 * Set default altitude to 0 to be used with pressure sensors
 *
Document flash settings area for future use
 * Prepare for 32-bit power
control (#995)
 * Introduce sonoff.h master header
 * Fix TLS MQTT SSL
fingerprint test (#808, #970)
 * Fix pressure calculation for some BMP
versions regression introduced with version 5.8.0i (#974)
 * Fix
Domoticz Dimmer set to same level not powering on (#945)
2017-10-10 15:40:02 +02:00
arendst ff52288efe v5.8.0i - Some fixes and Add Sealevel Pressure
5.8.0i
 * Add Domoticz counter sensor to IrReceive representing Received
IR Protocol and Data
 * Fix Southern Hemisphere TIME_STD/TIME_DST
(#968)
 * Add Sea level pressure calculation (#974)
 * Fix virtual relay
status message used with Color/Dimmer control (#989)
 * Fix command
IRSend and IRHvac case sensitive parameter regression introduced with
version 5.8.0 (#993)
2017-10-08 16:51:05 +02:00
arendst 3bc7dd4e83 v5.8.0h - Add IR Receive
5.8.0h
 * Rename command IRRemote to IRSend (#956)
 * Add IR Receiver
support. Disable in user_config.h (#956)
 * Change default PWM
assignment for Witty Cloud to support optional Color/Dimmer control
(#976)
 *   GPIO12 (Green) from GPIO_PWM4 to GPIO_PWM2
 *   GPIO13
(Blue)  from GPIO_PWM5 to GPIO_PWM3
 *   GPIO15 (Red)   from GPIO_PWM3
to GPIO_PWM1
2017-10-06 17:28:00 +02:00
arendst 9e845f3c1e v5.8.0g - Fix some PWM issues
5.8.0g
 * Fix inverted PWM index (#960)
 * Fix some PWM related issues
(#967)
2017-10-05 13:28:31 +02:00
arendst c82fe7f46e v5.8.0f - Add inverted PWM support
5.8.0f
 * Set all saved power settings to Off when SetOption0
(SaveState) = 0 (#955)
 * Allow PWM initialization after restart (#955)

* Add support for inverted PWM (#960)
2017-10-04 17:29:49 +02:00
arendst 12af1af01b v5.8.0e - SnfBrdge RF code as Domoticz Counter
5.8.0e
 * Add Domoticz counter sensor to Sonoff Bridge representing
Received RF code (#943)
 * Add support for Luani HVIO board
(https://luani.de/projekte/esp8266-hvio/) (#953)
2017-10-02 16:45:03 +02:00
arendst 48faeaa2ce v5.8.0d - Add Color/Dimmer control to PWM
5.8.0d
 * Remove previous GPIO configuration when another module is
selected
 * Fix inverted relay power on state (#909)
 * Change default
PWM assignments for H801 RGB(CW) led controller to support optional
Color/Dimmer control
 *   GPIO04 (W2)    from GPIO_PWM2 to GPIO_USER to
be user configurable for GPIO_PWM5 (second White - Warm if W1 is Cold)

*   GPIO12 (Blue)  GPIO_PWM3 no change
 *   GPIO13 (Green) from
GPIO_PWM4 to GPIO_PWM2
 *   GPIO14 (W1)    from GPIO_PWM1 to GPIO_USER
to be user configurable for GPIO_PWM4 (first White - Cold or Warm)
 *
GPIO15 (Red)   from GPIO_PWM5 to GPIO_PWM1
 * Change default PWM
assignments for MagicHome RGB(W) led controller to support optional
Color/Dimmer control
 *   GPIO05 (Green) from GPIO_PWM4 to GPIO_PWM2
 *
GPIO12 (Blue)  from GPIO_PWM5 to GPIO_PWM3
 *   GPIO13 (White) GPIO_USER
to be user configurable for GPIO_PWM4 (White - Cold or Warm)
 *   GPIO14
(Red)   from GPIO_PWM3 to GPIO_PWM1
 * Add command SetOption15 0
(default) for command PWM control or SetOption15 1 for commands
Color/Dimmer control to PWM RGB(CW) leds (#941)
2017-10-01 14:32:36 +02:00
arendst 107b746083 v5.8.0c
5.8.0c
 * Add warning to webpage when USE_MINIMAL is selected (#929)
 *
Fix compile error when DOMOTICZ_UPDATE_TIMER is not defined (#930)
 *
Fix alignment of web page items in some browsers (#935)
 * Add smoother
movement of hour hand in WS2812 led clock (#936)
 * Add support for
Magic Home RGBW Led controller (#940)
2017-09-30 13:32:53 +02:00
arendst e974dcb7b7 v5.8.0b - Add Domoticz Voltage and Current
5.8.0b
 * Fix command FullTopic entry when using serial or console
interface
 * Fix possible UDP syslog blocking
 * Add debug information
to MQTT subscribe
 * Add Domoticz sensors for Voltage and Current (#903)
2017-09-26 15:10:58 +02:00
Theo Arends 33e116ccb9 v5.8.0a - Fix GPIOx JSON response
5.8.0a
 * Add translations to I2Cscan
 * Add translation to BH1750 unit
lx
 * Set default WS2812 pixel count to WS2812_LEDS
 * Fix command GPIOx
JSON response (#897)
2017-09-23 11:12:16 +02:00
arendst 9bad9e18c6 v5.7.1j - Fix On/Off for different language
5.7.1j
 * Remove the need for NeoPixelBus library for Hue support
 *
Reintroduce xdrv_ws2812 for flexible future library changes
 * Fix basic
On, Off, Toggle, Blink and BlinkOff commands when other language is
selected (#874)
2017-09-18 18:06:46 +02:00
arendst 87e89cda56 v5.7.1i - Add blink to WS2812 and Sonoff Leds
5.7.1i
* Add blink to WS2812 and Sonoff Led (#643)
2017-09-16 18:19:15 +02:00
arendst e232f22da2 v5.7.1h
5.7.1h
 * Consolidate WS2812 (xdrv_ws2812) into Sonoff Led
(xdrv_snfled)
 * Invert WS2812 fade speed to align with Sonoff led
(Speed 1 = fast, Speed 8 = slow)
 * Remove upper case MQTT receive
buffer
2017-09-16 17:34:03 +02:00
arendst e015b574e6 v5.7.1g - Add wificonfig option 5 (WIFI_WAIT)
5.7.1g
 * Add option WIFI_WAIT (5) to command WifiConfig to allow
connection retry to same AP without restart or update flash (#772, #869)
2017-09-16 14:19:47 +02:00
arendst cb0410a5dc v5.7.1f - Add dimmer parameter to Wakeup
5.7.1f
 * Reduce code and string length for output of commands Modules
and GPIOs
 * Add optional dimmer parameter to command Wakeup for
AiLight, Sonoff B1, Led and BN-SZ01 (#867)
2017-09-14 15:35:38 +02:00
arendst 2d5fc29976 v5.7.1e - Add Sonoff SC debugging
5.7.1e
 * Add Sonoff SC debug information
 * Change syslog service
2017-09-14 14:20:27 +02:00
arendst c16fd3d99e v5.7.1d
5.7.1d
 * Fix watchdog timeout caused by lack of stack space by now
using global buffers (#853)
 * Removed webserver syslog disable as now
no longer needed
 * Increased default MQTT message size from 368 to 405
bytes while keeping DMQTT_MAX_PACKET_SIZE = 512 (because we can)
 * Fix
MQTT Offline or Remove MQTT retained topic code
 * Allow command
SwitchTopic in group mode (#861)
 * Allow command SwitchMode if no
switches are defined (#861)
2017-09-13 14:19:34 +02:00
arendst 616b16d08d v5.7.1c - Extent port range
5.7.1c
 * Allow LogPort and MqttPort up to 65535 and add LogPort tot
Status 3 (#859)
2017-09-12 10:19:16 +02:00
arendst 105c5d7129 v5.7.1b - Add timeout to some sensors
5.7.1b
 * Add timeout to DHT and DS18B20 sensors (#852)
2017-09-10 17:20:03 +02:00
arendst 0151188652 v5.7.1a
5.7.1a
 * Fix Domoticz loop when Emulation is selected
 * Add GPIO14 to
Sonoff Dual (#797, #839)
 * Add support for Witty Cloud (#794)
 * Add
support for Yunshan Wifi Relay (#802)
 * Add GPIO16 input pulldown
(#827)
2017-09-10 15:51:44 +02:00
arendst 8585465967 v5.7.1
5.7.1 20170909
 * Remove leading spaces from MQTT data
 * Fix webconsole
special character entry
 * Allow # as prefix for color value
 * Fix
Alexa detection and Hue App Update Request (#698, #854)
2017-09-09 18:46:29 +02:00
arendst 53b0dad348 v5.7.0b - Add optional # to color value
5.7.0b
 * Add snfled UNDOCA
 * Allow # as prefix for color value for
ws2812 too
2017-09-08 17:14:39 +02:00
arendst 4f6acfa7d9 v5.7.0a - Add optional # to color
5.7.0a
 * Remove leading spaces from MQTT data
 * Fix webconsole special
character entry
 * Allow # as prefix for color value
2017-09-08 12:57:08 +02:00
Theo Arends 2bac7fa037 Add license information 2017-09-08 11:21:54 +02:00
Theo Arends 785239a1b8 Update README.md 2017-09-08 11:13:34 +02:00
Theo Arends b2c84a2758 Update README.md 2017-09-08 11:09:54 +02:00
Theo Arends fa83abf916 Add license info 2017-09-08 11:07:04 +02:00
Theo Arends f7bc1b6eee Update README.md 2017-09-07 19:03:43 +02:00
arendst 92ff7f0adc v5.7.0
5.7.0 20170907
* Shrink module configuration webpage
* Fix settings order during startup to allow for displaying debug
messages
* Fix some string length issues
* Add more string length tests by using strncpy
* Add Ai-Thinker RGBW led (AiLight)
* Add Power check and add PulseTime to power check at startup (#526)
* Add Supla Espablo support (#755)
* Add more precision to Sonoff Pow period and power results using
command WattRes 0|1 (#759)
* Add basic internationalization and localization (#763)
* Add more Sonoff Pow range checking (#772)
* Fix invalid JSON (#786, #822)
* Add duplicate check to received RF signal within 2 seconds for Sonoff
Bridge (#810)
2017-09-07 18:53:59 +02:00
arendst ee914714ab v5.6.1l - Tried to fix excepetion 3
5.6.1l
* Fix some string length issues
* Add more string length tests by using strncpy
* Tried to fix Exception 3 as I can't reproduce (#830)
2017-09-06 17:37:41 +02:00
arendst 95d54230fc v5.6.1k - Fix preprocessor language selection
5.6.1k
* Fix preprocessor language selection
2017-09-02 17:16:18 +02:00
arendst 1facc146cc Fix Linux compile error
5.6.1j
* Fix compile error on Linux due to language folder name
* Add basic internationalization and localization (#763)
* Fix invalid JSON (#822)
2017-09-02 15:06:57 +02:00
arendst 0fbbc23b2c Add I18n and fix invalid JSON
5.6.1i
* Add basic internationalization and localization (#763)
* Fix invalid JSON (#822)
2017-09-02 14:37:02 +02:00
arendst 740a0c6283 Add PulseTime to power check at startup
5.6.1h
* Add PulseTime to power check at startup (#526)
2017-08-30 11:08:18 +02:00
arendst 300bb8818f Fix Sonoff Bridge duplicates and check power at startup
5.6.1g
* Add power check at startup (#526)
* Add duplicate check to received RF signal within 2 seconds for Sonoff
Bridge (#810)
2017-08-29 16:35:45 +02:00
Theo Arends 9c3b1852b1 Revert HLW power changes
5.6.1f
* Fix JSON error (#786)
* Revert changes from 5.6.1e but extent HLW power timer to 10 seconds
(#796)
2017-08-27 10:00:11 +02:00
arendst 65681a7054 Remove HLW Power Timer (#759) 2017-08-24 15:09:39 +02:00
arendst 0de07df099 Fix possible Pow Exception 0 2017-08-24 11:09:52 +02:00
Theo Arends 0c59eb5585 Add more precision to Sonoff Pow period and power results using command WattRes 0|1 (#759) 2017-08-20 11:40:50 +02:00
arendst 3f365b6228 Add Supla Espablo support (#755) 2017-08-19 18:08:06 +02:00
arendst dbab55758a Shrink module configuration webpage 2017-08-19 16:29:51 +02:00
arendst d96191888d v5.6.1
5.6.1 20170818
* Change module list order in webpage
* Fix Sonoff T1 1CH and 2CH configuration (#751)
*
* 5.6.0 20170818
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Sonoff T1 support (#582)
* Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
* Add command SetOption14 0|1 to enable interlock mode (#719, #721)
* Fix Mitsubishi HVAC IR power controll (#740)
2017-08-18 18:04:49 +02:00
arendst fa0b7d7784 v5.6.0
5.6.0 20170818
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Sonoff T1 support (#582)
* Add AnalogInput0 if configured as Analog Input to webpage (#697, #746)
* Add command SetOption14 0|1 to enable interlock mode (#719, #721)
* Fix Mitsubishi HVAC IR power controll (#740)
2017-08-18 14:52:57 +02:00
arendst 06d0c62dfa Add global interlock
Use command SetOption14 1 to enable interlock mode
2017-08-18 12:55:08 +02:00
arendst e0f759a318 Invert Sonoff T1 led state 2017-08-18 10:40:21 +02:00
arendst 963476e688 v5.5.2i
5.5.2i
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support (saves 1k code
space)
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Fix Mitsubishi HVAC IR power controll (#740)
* Add Sonoff T1 support (#582)
2017-08-16 22:56:32 +02:00
arendst e9f4ca930a v5.5.2h - Add Sonoff B1 support
5.5.2h
* Fix Sonoff Pow intermittent exception 0
* Change Sonoff Pow sending Domoticz telemetry data only
* Add Sonoff B1 RGBCW led support with command Color RRGGBBCCWW (#676)
* Add command CT 152..500 to Sonoff Led and Sonoff B1 to control Color
Temperature
* Add Cold-Warm slider to web page for Sonoff Led and Sonoff B1
* Add CT parameter to Hue
* Add Ai-Thinker RGBW led (AiLight) (experimental)
* Add NeoPixelBus library to Sonoff Led for Hue support (saves 1k code
space)
* Add user configurable GPIO4 and GPIO5 to module Sonoff Bridge
* Fix Mitsubishi HVAC IR power controll (#740)
2017-08-16 17:45:23 +02:00
arendst c0b1ceba8b v5.5.2
5.5.2 20170808
* Extent max number of WS2812 pixels from 256 to 512 (#667)
* Add OTA handling if server responds with no update available (#695)
* Removed undocumented command FlashMode (#696)
* Fix compile time error message due to increased message buffer size
(#703)
2017-08-08 16:31:43 +02:00
Theo Arends d28aaf0625 Revert "v5.5.1a" 2017-08-08 16:11:24 +02:00
Theo Arends 05073b7ab7 Revert "Ota remove flash mode" 2017-08-08 16:08:08 +02:00
Theo Arends c88080b2bd v5.5.1b
5.5.1b
 * Extent max number of WS2812 pixels from 256 to 512 (#667)
 * Add OTA handling if server responds with no update available (#695)
 * Removed undocumented command FlashMode (#696)
 * Fix compile time error message due to increased message buffer size (#703)
2017-08-08 14:45:19 +02:00
Theo Arends 24520bfcfa v5.5.1a
5.5.1a
* Extent max number of WS2812 pixels from 256 to 512 (#667)
2017-08-05 20:11:20 +02:00
arendst 934d6e3f15 v5.5.1
5.5.1 20170805
* Fix Sonoff Rf Bridge issues
* Add Sonoff RF Bridge MQTT messages on received and learned RF signal
* Add command VoltRes 0|1 to select voltage resolution to 0.1 V (#654)
* Add averaging to Analog input (#686)
* Add Energy tele data on Sonoff Pow Threshold change (#688)
* Fix inconsistent property names in Messages (#690)
2017-08-05 15:11:50 +02:00
arendst 0a9ec10b0a v5.5.0
5.5.0 20170730
* Reduce code space by removing the following commands as they are
replaced by SetOption alternatives:
*   SaveState = SetOption0
*   ButtonRestrict = SetOption1
*   Units = SetOption2
*   MQTT = SetOption3
*   MQTTResponse = SetOption4
*   TempUnit = SetOption8
* Smoothing WS2812 animation poll, invert fade speed and max allowed
wakeup time down to 3000 seconds
* Fix initial button press detection
* Add support for Sonoff RF Bridge 433 using command RfKey
* Fix regression from 5.0.7 by increasing message buffer size from 360
to 368 to accomodate 4 x DS18x20 sensors (#637)
* Add GroupTopic to Topic test when using ButtonTopic/SwitchTopic to
send either ON/OFF or TOGGLE (#642)
* Adjust HLW calibration limits to accomodate HuaFan device and add
commands HlwPSet, HlwUSet and HlwISet (#654)
2017-07-30 17:55:37 +02:00
arendst 22ef93a2c4 v5.4.0
5.4.0 20170725
* Fix command reset regression introduced in 5.2.0
* Increase polling from 0.1 second to 0.05 second
* Add multipress to all buttons
* Fix button 1 double press behaviour on multi relay devices
* Add support for Hua Fan Smart Socket (#479)
* Add support for Sonoff 4ch Pro (#565)
* Add command SetOption13 1 to allow immediate action on single button
press
*   (disables multipress, hold and unrestricted commands) (#587)
2017-07-25 18:05:47 +02:00
arendst 7e6b3a2bb1 v5.3.0
5.3.0 20170715
* Major Hue rewrite which might introduce Alexa problems. If so,
initiate an issue
* Add support for Sonoff Led and BN-SZ01 Ceiling Led brightness control
to Hue
* Fix Sonoff Led Power, Dimmer and Color MQTT response (#176)
* Add commands Delay and Backlog to allow multiple commands at once
separated by ";" (#593)
* Use default flashmode DOUT to solve restart hangs on esp8285 chips
(#453, #598)
* Change Web console column width from 99 to 300 (#599)
2017-07-15 15:07:30 +02:00
Theo Arends 3a4210e0e2 Update planned support 2017-07-03 18:06:55 +02:00
Theo Arends dd44bdb471 Updated planned support 2017-07-03 18:01:57 +02:00
arendst 39a65e230b v5.2.4
5.2.4 20170703
* Removed flash mode update after selecting different module solving
esp8285 related problems
* Add device type flag to sonoff_template.ino
* Change Sonoff Led Wakeup and add support for Sonoff BN-SZ01 Led
2017-07-03 11:45:15 +02:00
arendst ee883bdcb8 v5.2.3
5.2.3 20170630
* Change Sonoff Led color conversion code
* Fix SetOption12 handling
* Simplify auto configuration upgrade
* Add option Upgrade <version_number> to only upgrade to any higher
version (Old PR #213)
* Change FallbackTopic to cmnd/<MQTTClient>/<command> <parameter>
bypassing FullTopic and Prefix (#538)
2017-06-30 17:54:19 +02:00
arendst 2195ddd496 v5.2.2
5.2.2 20170625
* Add configuration SaveAddress to Status 1 and Information Page
* Change Sonoff Led Color conversion from AtoH to strtol
* Fix possible wrong uploads due to configuration overwrites (#542)
* Fix payload negative numbers (#547)
2017-06-25 23:01:41 +02:00
arendst 92958f4bdd v5.2.1
5.2.1 20170622
* Fix Restore Configuration in case of lower version
* Revert auto configuration upgrade allowing easy upgrade which was
removed in version 5.2.0
* Fix config auto upgrade from versions below version 4.1.1 (#530)
2017-06-22 22:00:09 +02:00
arendst b88ec7f5a9 v5.2.0
5.2.0 20170619
* Add command SetOption12 1 to disable newly released configuration
flash rotate to reduce flash wear
* Fix command CounterDebounce by removing test for active GPIO (#524)
* Add command SetOption33 1..250 to allow user configure POW
Max_Power_Retry count (#525)
2017-06-19 22:54:49 +02:00
arendst d763fd52eb v5.1.7
5.1.7 20170616
* Prep removal of SetOptions alternatives
* Restore webpage upgrade error messages removed in 5.1.5
* Add hold button functionality to buttons 2 to 4
* Add command SetOption32 1..100 to set Key Hold Time from 0.1 seconds
to 10 seconds (#200)
* Allow slashes in Topic, GroupTopic, ButtonTopic and SwitchTopic (#507)
* Changed webpage form actions from post to get and use relative path
url (#434, #522)
2017-06-16 14:33:49 +02:00