Commit Graph

88 Commits

Author SHA1 Message Date
Theo Arends 53235a3382 Redesign Energy Total calculation
* Redesign Energy Total calculation
* Increase SDM120 modbus interval time to 200mS (#6282)
2019-09-06 18:02:31 +02:00
Theo Arends a1e9c2d2ac Fix SDM120 modbus dump and Domoticz Energy Consumed or Produced
Fix SDM120 modbus dump exception and Domoticz Energy Consumed or Produced (#6282)
2019-09-05 18:02:36 +02:00
Theo Arends af1edb0cdb Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
* Add time to more events (#6337)
 * Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
2019-09-04 18:06:34 +02:00
Theo Arends f88e87cfde Refactor and document power control
Refactor and document power control
2019-09-04 12:20:04 +02:00
Theo Arends 636e842545 Restore initial energy total default behaviour regression from yesterday
Restore initial energy total default behaviour regression from yesterday
2019-09-04 10:10:25 +02:00
Theo Arends 41f76c5128 Add restore power state when limit is restored
Add restore power state when limit is restored (#6340)
2019-09-03 22:27:54 +02:00
Theo Arends 1478f1624a Add restore power state when limiit restored
Add restore power state when limiit restored (#6340)
2019-09-03 22:22:36 +02:00
Theo Arends 8e4dd169f3 Init Energy Total on energy monitoring devices with Energy Total Register
Init Energy Total on energy monitoring devices with Energy Total Register (#6282)
2019-09-03 21:56:17 +02:00
Theo Arends b3562e030e Init Energy Total on energy monitoring devices with Energy Total Register
Init Energy Total on energy monitoring devices with Energy Total Register (#6282)
2019-09-03 21:53:20 +02:00
Theo Arends d44104135e Fix turning on/off all power when limit is reached
Fix turning on/off all power when limit is reached (#6340)
2019-09-03 21:15:36 +02:00
Theo Arends 04debb5305 Fix USE_SDM120_2 issues
Fix USE_SDM120_2 issues (#6282)
2019-09-02 16:41:18 +02:00
Theo Arends f4b5e565ef Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report
Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report (#6282)
2019-09-01 17:51:25 +02:00
Theo Arends b52da68a68 Fix energy smart calculation at day roll-over
Fix energy smart calculation at day roll-over
2019-08-28 10:52:24 +02:00
Theo Arends f31b903fab Bump version to 6.6.0.8
* Add Tuya Energy monitoring by Shantur Rathore
 * Add phase 1 Domoticz P1 Smart Meter support using energy sensors handled by xdrv_03_energy.ino based on an idea by pablozg
 *   Add commands Tariff1 0..23 (start Off-Peak hour), Tariff2 0..23 (start Standard hour) and Tariff3 0/1 (Saturday and Sunday Off-Peak)
2019-08-27 17:01:12 +02:00
Theo Arends 0e4d4a889a Refactor Energy code saving space
Refactor Energy code saving space
2019-08-16 14:41:02 +02:00
Theo Arends 2d0143623d Refactor commands by processing optional prefix
Refactor commands by processing optional prefix
2019-08-11 18:12:18 +02:00
Theo Arends 27efc08d2c Add define DEBUG_TASMOTA_CORE
Add define DEBUG_TASMOTA_CORE
2019-08-08 16:24:11 +02:00
Theo Arends 714f938c05 Refactor energy commands
* Refactor energy commands
 * Add define USE_ENERGY_MARGIN_DETECTION to disable Energy Margin and Power Limit detection
 * Add define USE_ENERGY_POWER_LIMIT to disable Energy Power Limit detection while Energy Margin detection is active
2019-08-01 15:46:12 +02:00
Theo Arends 64521b42b6 Add Epoch and UptimeSec to JSON messages
Add Epoch and UptimeSec to JSON messages (#6068)
2019-07-11 14:09:42 +02:00
Theo Arends 0243e2be7e Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90 (#6036)
2019-07-08 14:16:33 +02:00
Theo Arends 4e95417db4 Add reset of Energy values when connection to sensor is lost for over 4 seconds
Add reset of Energy values when connection to sensor is lost for over 4 seconds (#5874, #5881)
2019-05-30 12:45:02 +02:00
Theo Arends 4d070bfb15 Change default PowerDelta from 80% to 0% on new installations
Change default PowerDelta from 80% to 0% on new installations (#5858, #5028, #4813, #4130, #4145, #3795, #3778, #3660, #3648)
2019-05-24 15:04:48 +02:00
Theo Arends a623d1e90b Add temp test
Add temp test
2019-05-22 12:31:23 +02:00
Theo Arends e472d3232a Add device OverTemp (>73 Celsius) detection to selected Energy Monitoring devices
* Fix Sonoff Pow R2 / S31 invalid energy increments (#5789)
 * Add device OverTemp (>73 Celsius) detection to any Energy Monitoring device with temperature sensor powering off all outputs
2019-05-14 17:46:40 +02:00
Theo Arends 0b6c62f5f9 Add support for Shelly 1PM Template
Add support for Shelly 1PM Template {"NAME":"Shelly 1PM","GPIO":[56,0,0,0,82,134,0,0,0,0,0,21,0],"FLAG":2,"BASE":18} (#5716)
2019-05-13 18:26:07 +02:00
Theo Arends 5e810f1ff3 Add Shelly 2.5 overtemp functionality
* Add all temperature, humidity and pressure for global access
 * Add Shelly 2.5 overtemp functionality
 * Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592)
2019-04-15 18:12:42 +02:00
Theo Arends eb9617e3f9 Tune some functionality
Tune some functionality
2019-03-30 13:03:45 +01:00
Theo Arends 6922e657d9 Shrink code/flash space
Shrink code/flash space
2019-03-23 17:00:59 +01:00
Theo Arends b7f89c0a8c 6.5.0.1 Change GUI data collection
6.5.0.1 20190319
 * Change Web GUI sensor data collection
2019-03-19 17:31:43 +01:00
Theo Arends 06a9fbd792 Changed logging message handling
Changed logging message handling
2019-03-08 15:15:42 +01:00
Theo Arends f0a7a1f2a1 Fix Energy TotalStartTime
Fix Energy TotalStartTime when commands EnergyReset0 and/or EnergyReset3 used (#5373)
2019-03-01 12:08:41 +01:00
Theo Arends b839d7e80e Add user configuration of MCP39F501
Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
2019-02-04 18:18:47 +01:00
Theo Arends 48faabc1cf Revert "Add user configuration of MCP39F501"
This reverts commit c340e2b8bd.
2019-02-04 18:17:50 +01:00
Theo Arends c340e2b8bd Add user configuration of MCP39F501
Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
2019-02-04 18:17:17 +01:00
Theo Arends 304ac6fe44 6.4.1.12 code changes (byte/boolean)
6.4.1.12 20190128
 * Change code use of boolean to bool and byte to uint8_t
 * Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
Theo Arends 41351001f5 6.4.1.6 Re-introduce Cal commands
6.4.1.6 20190105
 * Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
2019-01-05 15:39:56 +01:00
Theo Arends 447ec6256e 6.4.1.4 Update Copyright (C) 2019
6.4.1.4 20190101
 * Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
Theo Arends c1102a4863 6.4.0.2 Fix possible dtostrf bos
6.4.0.2 20181221
 * Fix possible dtostrf buffer overflows by increasing buffers
2018-12-21 16:17:06 +01:00
Theo Arends 23c16e58a9 Housekeeping
Housekeeping
2018-11-20 15:00:24 +01:00
andrethomas 4a7e7b0dbb Change C functions with () to (void) 2018-11-14 15:32:09 +02:00
Theo Arends 15148f290d 6.3.0.4 Add SetSensorXX
6.3.0.4 20181106
 * Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
Theo Arends e6a8b2d30d Add TotalStartTime to Energy JSON
Add TotalStartTime to Energy JSON message (#3971)
2018-10-30 17:04:19 +01:00
Theo Arends f05a471e48 Fix KNX compile error 2018-09-28 17:02:55 +02:00
Theo Arends 4b7c797fb7 6.2.1.9 Apparent/Reactive Power
6.2.1.9 20180928
 * Add Apparent Power and Reactive Power to Energy Monitoring devices (#251)
2018-09-28 15:48:42 +02:00
Theo Arends 7a767f104c 6.2.1.6 Remove some commands
6.2.1.6 20180922
 * Removed commands PowerCal, VoltageCal and CurrentCal as more functionality is provided by commands PowerSet, VoltageSet and CurrentSet
 * Allow decimals as input to commands PowerSet, VoltageSet and CurrentSet
 * Add support for PCA9685 12bit 16pin hardware PWM driver (#3866)
2018-09-22 15:09:53 +02:00
Theo Arends f7a8b1f923 Shelly2 clean up
Shelly2 clean up
2018-09-21 16:02:56 +02:00
Theo Arends 4065a215f0 Add Shelly2 Energy Monitoring
Add energy monitoring to Shelly2 (#2789)
2018-09-21 15:22:17 +02:00
Theo Arends ff4f8f75c1 Add uncalibrated energy monitor
Add uncalibrated energy monitoring to Shelly2 (#2789)
2018-09-17 20:32:38 +02:00
Theo Arends 7cd9224819 6.2.1.3 - Change drop down list
6.2.1.3 20180907
 * Change web Configure Module GPIO drop down list order for better readability
 * Fix showing Period Power in energy threshold messages
 * Fix ButtonRetain to not use default topic for clearing retain messages (#3737)
2018-09-08 17:18:31 +02:00
Theo Arends f517755303 Prep for frequency display
Prep for energy frequency display and update xnrg_05_pzem2.ino with correct register values
2018-09-07 18:15:47 +02:00