# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. **Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz) 8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.8** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. This release will be supported from ESP32/Arduino library Core version **v3.1.0.241206**. Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.0.241206 have been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface. ## Initial installation Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/). ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.8**. - **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota-4M.bin** = The Tasmota version with most drivers and filesystem for 4M+ flash. - **tasmota-AD.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash. - **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. - **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware - http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota/release-14.4.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based The following binary downloads have been compiled with ESP32/Arduino library core version **v3.1.0.241206**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. - **tasmota32s2.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial and 4M+ flash. - **tasmota32s2cdc.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S2 with serial over embedded USB CDC only and 4M+ flash. - **tasmota32s3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-S3 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32c2.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with serial and 4M+ flash. - **tasmota32c3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C2 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32c6.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C6 with USB HWCDC and fallback to serial and 4M+ flash. - **tasmota32-AD.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. - **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash. - **tasmota32-nspanel.bin** = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support. - **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash. - **tasmota32-zbbridgepro.bin** - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/firmware/release-firmware - https://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from - https://ota.tasmota.com/tasmota32/release-14.4.0 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin`` ## Additional information [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v14.4.0 Rudolph ### Added - Command `WebColor20` to control color of Button when Off - Command `SetOption161 1` to disable display of state text [#22515](https://github.com/arendst/Tasmota/issues/22515) - Command `SetOption162 1` to disable adding export energy to energy today [#22578](https://github.com/arendst/Tasmota/issues/22578) - DALI support for short addresses (gear) and groups - DALI command `DaliGear` to set max found gear to speed up scan response - DALI command `DaliGroup` to add gear to groups - DALI command `DaliTarget` to set light control broadcast, group number or gear number - DALI command `DaliGroupSliders 0..16` to show GUI group sliders with feedback disabling `DaliLight` - DALI inverted signal configuration using GPIO DALI RX_i/TX_i - Support for I2C over Serial [#22444](https://github.com/arendst/Tasmota/issues/22444) - Support KNX for scripts [#22429](https://github.com/arendst/Tasmota/issues/22429) - Support deep sleep (standby) for VL53L0X [#22441](https://github.com/arendst/Tasmota/issues/22441) - Support for Shelly DALI Dimmer Gen3 - Support for HLK-LD2410S 24GHz smart wave motion sensor [#22253](https://github.com/arendst/Tasmota/issues/22253) - Support for US AQI and EPA AQI in PMS5003x sensors [#22294](https://github.com/arendst/Tasmota/issues/22294) - Support for MS5837 pressure and temperature sensor [#22376](https://github.com/arendst/Tasmota/issues/22376) - Support for TM1640 based IoTTimer by Stefan Oskamp [#21376](https://github.com/arendst/Tasmota/issues/21376) - Support for Sonoff POWCT Energy Export Active [#22596](https://github.com/arendst/Tasmota/issues/22596) - HLK-LD2410 Engineering mode [#21880](https://github.com/arendst/Tasmota/issues/21880) - Mitsubishi Electric HVAC Operation time for MiElHVAC [#22334](https://github.com/arendst/Tasmota/issues/22334) - Mitsubishi Electric HVAC Outdoor Temperature for MiElHVAC [#22345](https://github.com/arendst/Tasmota/issues/22345) - Mitsubishi Electric HVAC Compressor Frequency for MiElHVAC [#22347](https://github.com/arendst/Tasmota/issues/22347) - Mitsubishi Electric HVAC Auto Clear Remote Temp for MiElHVAC [#22370](https://github.com/arendst/Tasmota/issues/22370) - SolaxX1 Meter mode [#22330](https://github.com/arendst/Tasmota/issues/22330) - Show Active Power Total with any multi-phase energy monitoring [#22579](https://github.com/arendst/Tasmota/issues/22579) - ESP32 support for WPA2/3 Enterprise conditional in core v3.1.0.241206 [#22600](https://github.com/arendst/Tasmota/issues/22600) - ESP32 ULP lp_core to Berry ULP module (#22567)[#22567](https://github.com/arendst/Tasmota/issues/22567) - ESP32 new BLE filters by name and minimum RSSI [#22530](https://github.com/arendst/Tasmota/issues/22530) - ESP32 Hybrid compile take custom boards settings in account [#22542](https://github.com/arendst/Tasmota/issues/22542) - ESP32 MI32 legacy add config operations [#22458](https://github.com/arendst/Tasmota/issues/22458) - BLE track devices with RPA [#22300](https://github.com/arendst/Tasmota/issues/22300) - Berry add I2C read16/write16 supporting Little Endian [#22448](https://github.com/arendst/Tasmota/issues/22448) - Berry drivers for PCA9535 (generic and in SenseCAP D1) [#22451](https://github.com/arendst/Tasmota/issues/22451) - HASPmota `haspmota.get_pages()` to get the sorted list of pages [#22358](https://github.com/arendst/Tasmota/issues/22358) ### Breaking Changed - ESP32 ArtNet switches from GRB to RGB encoding [#22556](https://github.com/arendst/Tasmota/issues/22556) ### Changed - ESP32 Platform from 2024.09.30 to 2024.12.30, Framework (Arduino Core) from v3.1.0.240926 to v3.1.0.241206 and IDF to 5.3.2 [#22600](https://github.com/arendst/Tasmota/issues/22600) - ESP32 LVGL library from v9.2.0 to v9.2.2 [#22385](https://github.com/arendst/Tasmota/issues/22385) - ESP32 replaced NeoPixelBus with TasmotaLED [#22556](https://github.com/arendst/Tasmota/issues/22556) - Redesign GUI adding feedback to buttons, shutters and lights - Add GUI submenu headers and refresh configuration button text (#22592) - Use command `WebButton1` to change GUI shutter 1 name - RG-15 sensor name from RG-15 to RG15 [#22612](https://github.com/arendst/Tasmota/issues/22612) - Unit (k)VAr(h) to (k)var(h) [#22435](https://github.com/arendst/Tasmota/issues/22435) - AHT1X/AHT2X/AHT3X ready for virtual I2C [#22427](https://github.com/arendst/Tasmota/issues/22427) - SGP4X ready for virtual I2C [#22427](https://github.com/arendst/Tasmota/issues/22427) - SCD40 reduce logging levels [#22443](https://github.com/arendst/Tasmota/issues/22443) - SCD40 ready for virtual I2C [#22443](https://github.com/arendst/Tasmota/issues/22443) - Refactored `i2c_enabled` as array [#22387](https://github.com/arendst/Tasmota/issues/22387) - DALI renamed commands `DaliCommission` to `DaliScan` and `DaliWeb` to `DaliLight` - DALI set Tasmota light control as default - Shutter optimized behavior to publish shutter data with sensor request [#22353](https://github.com/arendst/Tasmota/issues/22353) - Prevent active BLE operations with unencrypted MI-format beacons [#22453](https://github.com/arendst/Tasmota/issues/22453) - ESP32 max number of supported switches/buttons/relays from 28 to 32 - ESP32 max number of interlocks from 14 to 16 - HASPmota support for page delete and object updates [#22311](https://github.com/arendst/Tasmota/issues/22311) ### Fixed - FUNC_COMMAND linked list command buffer corruption by shutter driver - Shift595 output offsets and restart relay toggles - Use HTML escape on File System Edit File load [#22492](https://github.com/arendst/Tasmota/issues/22492) - Prevent crashing when `display.ini` is missing end `#` [#22471](https://github.com/arendst/Tasmota/issues/22471) - KNX Scenes index change regression from v14.2.0.4 [#22405](https://github.com/arendst/Tasmota/issues/22405) - Magic switch applying masking window to any power change [#22535](https://github.com/arendst/Tasmota/issues/22535) - Shutter wrong power ON state [#22548](https://github.com/arendst/Tasmota/issues/22548) - Alexa Hue with multiple devices [#22383](https://github.com/arendst/Tasmota/issues/22383) - Mitsubishi Electric HVAC Standby Stage for MiElHVAC [#22430](https://github.com/arendst/Tasmota/issues/22430) - EQ3 TRV firmware version 1.46 fails if the default true is used in subscribe on the notify characteristic [#22328](https://github.com/arendst/Tasmota/issues/22328) - Ethernet on -DFRAMEWORK_ARDUINO_ITEAD framework regression from v14.3.0 [#22367](https://github.com/arendst/Tasmota/issues/22367) - ESP8266 Device Group exception due to lack of stack space (#22271)[#22271](https://github.com/arendst/Tasmota/issues/22271) - ESP32 Upgrade by file upload response based on file size [#22500](https://github.com/arendst/Tasmota/issues/22500) - ESP32 Arduino Core IPv6 zones used by Matter [#22378](https://github.com/arendst/Tasmota/issues/22378) - ESP32, ESP32-S2 and ESP32-S3 re-enable touch buttons [#22446](https://github.com/arendst/Tasmota/issues/22446) - ESP32-S3 UART output mode for Tx [#22426](https://github.com/arendst/Tasmota/issues/22426) - Matter provisioning with matter.js controller [#22470](https://github.com/arendst/Tasmota/issues/22470) ### Removed