/* settings.ino - user settings for Tasmota Copyright (C) 2019 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef DOMOTICZ_UPDATE_TIMER #define DOMOTICZ_UPDATE_TIMER 0 // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) (Optional) #endif #ifndef EMULATION #define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE) #endif #ifndef MTX_ADDRESS1 // Add Display Support for up to eigth Matrices #define MTX_ADDRESS1 0 #endif #ifndef MTX_ADDRESS2 #define MTX_ADDRESS2 0 #endif #ifndef MTX_ADDRESS3 #define MTX_ADDRESS3 0 #endif #ifndef MTX_ADDRESS4 #define MTX_ADDRESS4 0 #endif #ifndef MTX_ADDRESS5 #define MTX_ADDRESS5 0 #endif #ifndef MTX_ADDRESS6 #define MTX_ADDRESS6 0 #endif #ifndef MTX_ADDRESS7 #define MTX_ADDRESS7 0 #endif #ifndef MTX_ADDRESS8 #define MTX_ADDRESS8 0 #endif #ifndef HOME_ASSISTANT_DISCOVERY_ENABLE #define HOME_ASSISTANT_DISCOVERY_ENABLE 0 #endif #ifndef LATITUDE #define LATITUDE 48.858360 // [Latitude] Your location to be used with sunrise and sunset #endif #ifndef LONGITUDE #define LONGITUDE 2.294442 // [Longitude] Your location to be used with sunrise and sunset #endif #ifndef WORKING_PERIOD #define WORKING_PERIOD 5 // Working period of the SDS Sensor, Takes a reading every X Minutes #endif #ifndef COLOR_TEXT #define COLOR_TEXT "#000" // Global text color - Black #endif #ifndef COLOR_BACKGROUND #define COLOR_BACKGROUND "#fff" // Global background color - White #endif #ifndef COLOR_FORM #define COLOR_FORM "#f2f2f2" // Form background color - Greyish #endif #ifndef COLOR_INPUT_TEXT #define COLOR_INPUT_TEXT "#000" // Input text color - Black #endif #ifndef COLOR_INPUT #define COLOR_INPUT "#fff" // Input background color - White #endif #ifndef COLOR_CONSOLE_TEXT #define COLOR_CONSOLE_TEXT "#000" // Console text color - Black #endif #ifndef COLOR_CONSOLE #define COLOR_CONSOLE "#fff" // Console background color - White #endif #ifndef COLOR_TEXT_WARNING #define COLOR_TEXT_WARNING "#f00" // Warning text color - Red #endif #ifndef COLOR_TEXT_SUCCESS #define COLOR_TEXT_SUCCESS "#008000" // Success text color - Green #endif #ifndef COLOR_BUTTON_TEXT #define COLOR_BUTTON_TEXT "#fff" // Button text color - White #endif #ifndef COLOR_BUTTON #define COLOR_BUTTON "#1fa3ec" // Button color - Blueish #endif #ifndef COLOR_BUTTON_HOVER #define COLOR_BUTTON_HOVER "#0e70a4" // Button color when hovered over - Darker blueish #endif #ifndef COLOR_BUTTON_RESET #define COLOR_BUTTON_RESET "#d43535" // Restart/Reset/Delete button color - Redish #endif #ifndef COLOR_BUTTON_RESET_HOVER #define COLOR_BUTTON_RESET_HOVER "#931f1f" // Restart/Reset/Delete button color when hovered over - Darker redish #endif #ifndef COLOR_BUTTON_SAVE #define COLOR_BUTTON_SAVE "#47c266" // Save button color - Greenish #endif #ifndef COLOR_BUTTON_SAVE_HOVER #define COLOR_BUTTON_SAVE_HOVER "#5aaf6f" // Save button color when hovered over - Darker greenish #endif #ifndef COLOR_TIMER_TAB_TEXT #define COLOR_TIMER_TAB_TEXT "#fff" // Config timer tab text color - White #endif #ifndef COLOR_TIMER_TAB_BACKGROUND #define COLOR_TIMER_TAB_BACKGROUND "#999" // Config timer tab background color - Light grey #endif #ifndef COLOR_TITLE_TEXT #define COLOR_TITLE_TEXT COLOR_TEXT // Title text color defaults to global text color either dark or light #endif #ifndef IR_RCV_MIN_UNKNOWN_SIZE #define IR_RCV_MIN_UNKNOWN_SIZE 6 // Set the smallest sized "UNKNOWN" message packets we actually care about (default 6, max 255) #endif #ifndef ENERGY_OVERTEMP #define ENERGY_OVERTEMP 90 // Overtemp in Celsius #endif #ifndef DEFAULT_DIMMER_MAX #define DEFAULT_DIMMER_MAX 100 #endif #ifndef DEFAULT_DIMMER_MIN #define DEFAULT_DIMMER_MIN 0 #endif #ifndef DEFAULT_LIGHT_DIMMER #define DEFAULT_LIGHT_DIMMER 10 #endif #ifndef DEFAULT_LIGHT_COMPONENT #define DEFAULT_LIGHT_COMPONENT 255 #endif #ifndef CORS_ENABLED_ALL #define CORS_ENABLED_ALL "*" #endif enum WebColors { COL_TEXT, COL_BACKGROUND, COL_FORM, COL_INPUT_TEXT, COL_INPUT, COL_CONSOLE_TEXT, COL_CONSOLE, COL_TEXT_WARNING, COL_TEXT_SUCCESS, COL_BUTTON_TEXT, COL_BUTTON, COL_BUTTON_HOVER, COL_BUTTON_RESET, COL_BUTTON_RESET_HOVER, COL_BUTTON_SAVE, COL_BUTTON_SAVE_HOVER, COL_TIMER_TAB_TEXT, COL_TIMER_TAB_BACKGROUND, COL_TITLE, COL_LAST }; const char kWebColors[] PROGMEM = COLOR_TEXT "|" COLOR_BACKGROUND "|" COLOR_FORM "|" COLOR_INPUT_TEXT "|" COLOR_INPUT "|" COLOR_CONSOLE_TEXT "|" COLOR_CONSOLE "|" COLOR_TEXT_WARNING "|" COLOR_TEXT_SUCCESS "|" COLOR_BUTTON_TEXT "|" COLOR_BUTTON "|" COLOR_BUTTON_HOVER "|" COLOR_BUTTON_RESET "|" COLOR_BUTTON_RESET_HOVER "|" COLOR_BUTTON_SAVE "|" COLOR_BUTTON_SAVE_HOVER "|" COLOR_TIMER_TAB_TEXT "|" COLOR_TIMER_TAB_BACKGROUND "|" COLOR_TITLE_TEXT; enum TasmotaSerialConfig { TS_SERIAL_5N1, TS_SERIAL_6N1, TS_SERIAL_7N1, TS_SERIAL_8N1, TS_SERIAL_5N2, TS_SERIAL_6N2, TS_SERIAL_7N2, TS_SERIAL_8N2, TS_SERIAL_5E1, TS_SERIAL_6E1, TS_SERIAL_7E1, TS_SERIAL_8E1, TS_SERIAL_5E2, TS_SERIAL_6E2, TS_SERIAL_7E2, TS_SERIAL_8E2, TS_SERIAL_5O1, TS_SERIAL_6O1, TS_SERIAL_7O1, TS_SERIAL_8O1, TS_SERIAL_5O2, TS_SERIAL_6O2, TS_SERIAL_7O2, TS_SERIAL_8O2 }; const uint8_t kTasmotaSerialConfig[] PROGMEM = { SERIAL_5N1, SERIAL_6N1, SERIAL_7N1, SERIAL_8N1, SERIAL_5N2, SERIAL_6N2, SERIAL_7N2, SERIAL_8N2, SERIAL_5E1, SERIAL_6E1, SERIAL_7E1, SERIAL_8E1, SERIAL_5E2, SERIAL_6E2, SERIAL_7E2, SERIAL_8E2, SERIAL_5O1, SERIAL_6O1, SERIAL_7O1, SERIAL_8O1, SERIAL_5O2, SERIAL_6O2, SERIAL_7O2, SERIAL_8O2 }; /*********************************************************************************************\ * RTC memory \*********************************************************************************************/ const uint16_t RTC_MEM_VALID = 0xA55A; uint32_t rtc_settings_crc = 0; uint32_t GetRtcSettingsCrc(void) { uint32_t crc = 0; uint8_t *bytes = (uint8_t*)&RtcSettings; for (uint32_t i = 0; i < sizeof(RTCMEM); i++) { crc += bytes[i]*(i+1); } return crc; } void RtcSettingsSave(void) { if (GetRtcSettingsCrc() != rtc_settings_crc) { RtcSettings.valid = RTC_MEM_VALID; ESP.rtcUserMemoryWrite(100, (uint32_t*)&RtcSettings, sizeof(RTCMEM)); rtc_settings_crc = GetRtcSettingsCrc(); } } void RtcSettingsLoad(void) { ESP.rtcUserMemoryRead(100, (uint32_t*)&RtcSettings, sizeof(RTCMEM)); // 0x290 if (RtcSettings.valid != RTC_MEM_VALID) { memset(&RtcSettings, 0, sizeof(RTCMEM)); RtcSettings.valid = RTC_MEM_VALID; RtcSettings.energy_kWhtoday = Settings.energy_kWhtoday; RtcSettings.energy_kWhtotal = Settings.energy_kWhtotal; RtcSettings.energy_usage = Settings.energy_usage; for (uint32_t i = 0; i < MAX_COUNTERS; i++) { RtcSettings.pulse_counter[i] = Settings.pulse_counter[i]; } RtcSettings.power = Settings.power; RtcSettingsSave(); } rtc_settings_crc = GetRtcSettingsCrc(); } bool RtcSettingsValid(void) { return (RTC_MEM_VALID == RtcSettings.valid); } /********************************************************************************************/ uint32_t rtc_reboot_crc = 0; uint32_t GetRtcRebootCrc(void) { uint32_t crc = 0; uint8_t *bytes = (uint8_t*)&RtcReboot; for (uint32_t i = 0; i < sizeof(RTCRBT); i++) { crc += bytes[i]*(i+1); } return crc; } void RtcRebootSave(void) { if (GetRtcRebootCrc() != rtc_reboot_crc) { RtcReboot.valid = RTC_MEM_VALID; ESP.rtcUserMemoryWrite(100 - sizeof(RTCRBT), (uint32_t*)&RtcReboot, sizeof(RTCRBT)); rtc_reboot_crc = GetRtcRebootCrc(); } } void RtcRebootReset(void) { RtcReboot.fast_reboot_count = 0; RtcRebootSave(); } void RtcRebootLoad(void) { ESP.rtcUserMemoryRead(100 - sizeof(RTCRBT), (uint32_t*)&RtcReboot, sizeof(RTCRBT)); // 0x280 if (RtcReboot.valid != RTC_MEM_VALID) { memset(&RtcReboot, 0, sizeof(RTCRBT)); RtcReboot.valid = RTC_MEM_VALID; // RtcReboot.fast_reboot_count = 0; // Explicit by memset RtcRebootSave(); } rtc_reboot_crc = GetRtcRebootCrc(); } bool RtcRebootValid(void) { return (RTC_MEM_VALID == RtcReboot.valid); } /*********************************************************************************************\ * Config - Flash \*********************************************************************************************/ extern "C" { #include "spi_flash.h" } #include "eboot_command.h" #if defined(ARDUINO_ESP8266_RELEASE_2_3_0) || defined(ARDUINO_ESP8266_RELEASE_2_4_0) || defined(ARDUINO_ESP8266_RELEASE_2_4_1) || defined(ARDUINO_ESP8266_RELEASE_2_4_2) || defined(ARDUINO_ESP8266_RELEASE_2_5_0) || defined(ARDUINO_ESP8266_RELEASE_2_5_1) || defined(ARDUINO_ESP8266_RELEASE_2_5_2) extern "C" uint32_t _SPIFFS_end; // From libraries/EEPROM/EEPROM.cpp EEPROMClass const uint32_t SPIFFS_END = ((uint32_t)&_SPIFFS_end - 0x40200000) / SPI_FLASH_SEC_SIZE; #else // Core > 2.5.2 and STAGE #if AUTOFLASHSIZE #include "flash_hal.h" // From libraries/EEPROM/EEPROM.cpp EEPROMClass const uint32_t SPIFFS_END = (FS_end - 0x40200000) / SPI_FLASH_SEC_SIZE; #else extern "C" uint32_t _FS_end; // From libraries/EEPROM/EEPROM.cpp EEPROMClass const uint32_t SPIFFS_END = ((uint32_t)&_FS_end - 0x40200000) / SPI_FLASH_SEC_SIZE; #endif // AUTOFLASHSIZE #endif // All cores < pre-2.6.0 // Version 4.2 config = eeprom area const uint32_t SETTINGS_LOCATION = SPIFFS_END; // No need for SPIFFS as it uses EEPROM area // Version 5.2 allow for more flash space const uint8_t CFG_ROTATES = 8; // Number of flash sectors used (handles uploads) uint32_t settings_location = SETTINGS_LOCATION; uint32_t settings_crc32 = 0; uint8_t *settings_buffer = nullptr; /********************************************************************************************/ /* * Based on cores/esp8266/Updater.cpp */ void SetFlashModeDout(void) { uint8_t *_buffer; uint32_t address; eboot_command ebcmd; eboot_command_read(&ebcmd); address = ebcmd.args[0]; _buffer = new uint8_t[FLASH_SECTOR_SIZE]; if (ESP.flashRead(address, (uint32_t*)_buffer, FLASH_SECTOR_SIZE)) { if (_buffer[2] != 3) { // DOUT _buffer[2] = 3; if (ESP.flashEraseSector(address / FLASH_SECTOR_SIZE)) { ESP.flashWrite(address, (uint32_t*)_buffer, FLASH_SECTOR_SIZE); } } } delete[] _buffer; } void SettingsBufferFree(void) { if (settings_buffer != nullptr) { free(settings_buffer); settings_buffer = nullptr; } } bool SettingsBufferAlloc(void) { SettingsBufferFree(); if (!(settings_buffer = (uint8_t *)malloc(sizeof(Settings)))) { AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_UPLOAD_ERR_2)); // Not enough (memory) space return false; } return true; } uint16_t GetCfgCrc16(uint8_t *bytes, uint32_t size) { uint16_t crc = 0; for (uint32_t i = 0; i < size; i++) { if ((i < 14) || (i > 15)) { crc += bytes[i]*(i+1); } // Skip crc } return crc; } uint16_t GetSettingsCrc(void) { // Fix miscalculation if previous Settings was 3584 and current Settings is 4096 between 0x06060007 and 0x0606000A uint32_t size = ((Settings.version < 0x06060007) || (Settings.version > 0x0606000A)) ? 3584 : sizeof(SYSCFG); return GetCfgCrc16((uint8_t*)&Settings, size); } uint32_t GetCfgCrc32(uint8_t *bytes, uint32_t size) { // https://create.stephan-brumme.com/crc32/#bitwise uint32_t crc = 0; while (size--) { crc ^= *bytes++; for (uint32_t j = 0; j < 8; j++) { crc = (crc >> 1) ^ (-int(crc & 1) & 0xEDB88320); } } return ~crc; } uint32_t GetSettingsCrc32(void) { return GetCfgCrc32((uint8_t*)&Settings, sizeof(SYSCFG) -4); // Skip crc32 } void SettingsSaveAll(void) { if (Settings.flag.save_state) { Settings.power = power; } else { Settings.power = 0; } XsnsCall(FUNC_SAVE_BEFORE_RESTART); XdrvCall(FUNC_SAVE_BEFORE_RESTART); SettingsSave(0); } /*********************************************************************************************\ * Quick power cycle monitoring \*********************************************************************************************/ void UpdateQuickPowerCycle(bool update) { if (Settings.flag3.fast_power_cycle_disable) { return; } uint32_t pc_register; uint32_t pc_location = SETTINGS_LOCATION - CFG_ROTATES; ESP.flashRead(pc_location * SPI_FLASH_SEC_SIZE, (uint32*)&pc_register, sizeof(pc_register)); if (update && ((pc_register & 0xFFFFFFF0) == 0xFFA55AB0)) { uint32_t counter = ((pc_register & 0xF) << 1) & 0xF; if (0 == counter) { // 4 power cycles in a row SettingsErase(3); // Quickly reset all settings including QuickPowerCycle flag EspRestart(); // And restart } else { pc_register = 0xFFA55AB0 | counter; ESP.flashWrite(pc_location * SPI_FLASH_SEC_SIZE, (uint32*)&pc_register, sizeof(pc_register)); AddLog_P2(LOG_LEVEL_DEBUG, PSTR("QPC: Flag %02X"), counter); } } else if (pc_register != 0xFFA55ABF) { pc_register = 0xFFA55ABF; // Assume flash is default all ones and setting a bit to zero does not need an erase if (ESP.flashEraseSector(pc_location)) { ESP.flashWrite(pc_location * SPI_FLASH_SEC_SIZE, (uint32*)&pc_register, sizeof(pc_register)); } AddLog_P2(LOG_LEVEL_DEBUG, PSTR("QPC: Reset")); } } /*********************************************************************************************\ * Config single char array support \*********************************************************************************************/ enum CharsIndex { SET_OTAURL, SET_MQTTPREFIX1, SET_MQTTPREFIX2, SET_MQTTPREFIX3, // SET_STASSID1, SET_STASSID2, // SET_STAPWD1, SET_STAPWD2, SET_WEBPWD, // SET_HOSTNAME, SET_SYSLOG_HOST, // SET_MQTT_HOST, SET_MQTT_CLIENT, // SET_MQTT_USER, SET_MQTT_PWD, // SET_MQTT_FULLTOPIC, SET_MQTT_TOPIC, // SET_MQTT_BUTTON_TOPIC, SET_MQTT_SWITCH_TOPIC, SET_MQTT_GRP_TOPIC, // SET_STATE_TXT1, SET_STATE_TXT2, SET_STATE_TXT3, SET_STATE_TXT4, // SET_FRIENDLYNAME1, SET_FRIENDLYNAME2, SET_FRIENDLYNAME3, SET_FRIENDLYNAME4, // SET_FRIENDLYNAME5, SET_FRIENDLYNAME6, SET_FRIENDLYNAME7, SET_FRIENDLYNAME8, // Future extension // SET_NTPSERVER1, SET_NTPSERVER2, SET_NTPSERVER3, // SET_MEM1, SET_MEM2, SET_MEM3, SET_MEM4, SET_MEM5, // SET_CORS, // SET_BUTTON1, SET_BUTTON2, SET_BUTTON3, SET_BUTTON4, // Future extension // SET_BUTTON5, SET_BUTTON6, SET_BUTTON7, SET_BUTTON8, // Future extension // SET_BUTTON9, SET_BUTTON10, SET_BUTTON11, SET_BUTTON12, // Future extension // SET_BUTTON13, SET_BUTTON14, SET_BUTTON15, SET_BUTTON16, // Future extension SET_MAX }; const uint32_t settings_loc_num = 1; // First phase only ota_url and mqtt_prefix const uint32_t settings_max_size = 134; char settings_fullstr[settings_max_size] = { 0 }; struct LOCATIONS { char* address; uint32_t size = 0; } Location[settings_loc_num]; void SettingsInitText(void) { for (uint32_t i = 0; i < settings_loc_num; i++) { if (0 == i) { Location[i].address = Settings.ota_url; Location[i].size = sizeof(Settings.ota_url) + (3 * sizeof(Settings.mqtt_prefix[0])); // Location[i].address = Settings.char_chunk1; // Location[i].size = sizeof(Settings.char_chunk1); // 134 } else if (1 == i) { Location[i].address = Settings.sta_ssid[0]; Location[i].size = (2 * sizeof(Settings.sta_ssid[0])) + (2 * sizeof(Settings.sta_pwd[0])) + sizeof(Settings.hostname) + sizeof(Settings.syslog_host); // Location[i].address = Settings.char_chunk2; // Location[i].size = sizeof(Settings.char_chunk2); // 262 } else if (2 == i) { // Need to move Settings.mqtt_port first! Location[i].address = Settings.mqtt_host; Location[i].size = sizeof(Settings.mqtt_host) + 2 + sizeof(Settings.mqtt_client) + sizeof(Settings.mqtt_user) + sizeof(Settings.mqtt_pwd) + sizeof(Settings.mqtt_topic) + sizeof(Settings.button_topic) + sizeof(Settings.mqtt_grptopic); // Location[i].address = Settings.char_chunk3; // Location[i].size = sizeof(Settings.char_chunk3); // 233 } } SettingsCopyText(0); // Load } void SettingsCopyText(uint32_t direction) { char* fullstr = settings_fullstr; uint32_t size = 0; for (uint32_t i = 0; i < settings_loc_num; i++) { size = Location[i].size; if (1 == direction) { memcpy(Location[i].address, fullstr, size); // Save to Settings } else { memcpy(fullstr, Location[i].address, size); // Load from Settings } fullstr += size; } } bool SettingsUpdateText(uint32_t index, char* replace) { if (index >= SET_MAX) { return false; // Setting not supported - internal error } // SettingsCopyText(0); // Load uint32_t start_pos = 0; uint32_t end_pos = 0; char* position = settings_fullstr; for (uint32_t size = 0; size < SET_MAX; size++) { while (*position++ != '\0') { } if (1 == index) { start_pos = position - settings_fullstr; } else if (0 == index) { end_pos = position - settings_fullstr -1; } index--; } uint32_t len_pos = position - settings_fullstr; uint32_t current_len = end_pos - start_pos; uint32_t replace_len = strlen(replace); int diff = replace_len - current_len; // AddLog_P2(LOG_LEVEL_DEBUG, PSTR("TST: start %d, end %d, len %d, current %d, replace %d, diff %d"), // start_pos, end_pos, len_pos, current_len, replace_len, diff); int too_long = (len_pos + diff) - sizeof(settings_fullstr); if (too_long > 0) { // AddLog_P2(LOG_LEVEL_INFO, PSTR("CFG: Text too long by %d char(s)"), too_long); return false; // Replace text too long } if (diff != 0) { // Shift full text string up or down memmove_P(settings_fullstr + start_pos + replace_len, settings_fullstr + end_pos, len_pos - end_pos); } // Replace text memmove_P(settings_fullstr + start_pos, replace, replace_len); // Fill for future use memset(settings_fullstr + len_pos + diff, 0x00, settings_max_size - len_pos - diff); // SettingsCopyText(1); // Save - Hold of for now return true; } char* SettingsGetText(uint32_t index) { if (index >= SET_MAX) { return nullptr; // Setting not supported - internal error } // SettingsCopyText(0); // Load char* position = settings_fullstr; for (;index > 0; index--) { while (*position++ != '\0') { } } return position; } /*********************************************************************************************\ * Config Save - Save parameters to Flash ONLY if any parameter has changed \*********************************************************************************************/ uint32_t GetSettingsAddress(void) { return settings_location * SPI_FLASH_SEC_SIZE; } void SettingsSave(uint8_t rotate) { /* Save configuration in eeprom or one of 7 slots below * * rotate 0 = Save in next flash slot * rotate 1 = Save only in eeprom flash slot until SetOption12 0 or restart * rotate 2 = Save in eeprom flash slot, erase next flash slots and continue depending on stop_flash_rotate * stop_flash_rotate 0 = Allow flash slot rotation (SetOption12 0) * stop_flash_rotate 1 = Allow only eeprom flash slot use (SetOption12 1) */ #ifndef FIRMWARE_MINIMAL if ((GetSettingsCrc32() != settings_crc32) || rotate) { if (1 == rotate) { // Use eeprom flash slot only and disable flash rotate from now on (upgrade) stop_flash_rotate = 1; } if (2 == rotate) { // Use eeprom flash slot and erase next flash slots if stop_flash_rotate is off (default) settings_location = SETTINGS_LOCATION +1; } if (stop_flash_rotate) { settings_location = SETTINGS_LOCATION; } else { settings_location--; if (settings_location <= (SETTINGS_LOCATION - CFG_ROTATES)) { settings_location = SETTINGS_LOCATION; } } Settings.save_flag++; if (UtcTime() > START_VALID_TIME) { Settings.cfg_timestamp = UtcTime(); } else { Settings.cfg_timestamp++; } Settings.cfg_size = sizeof(SYSCFG); Settings.cfg_crc = GetSettingsCrc(); // Keep for backward compatibility in case of fall-back just after upgrade Settings.cfg_crc32 = GetSettingsCrc32(); if (ESP.flashEraseSector(settings_location)) { ESP.flashWrite(settings_location * SPI_FLASH_SEC_SIZE, (uint32*)&Settings, sizeof(SYSCFG)); } if (!stop_flash_rotate && rotate) { for (uint32_t i = 1; i < CFG_ROTATES; i++) { ESP.flashEraseSector(settings_location -i); // Delete previous configurations by resetting to 0xFF delay(1); } } AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_CONFIG D_SAVED_TO_FLASH_AT " %X, " D_COUNT " %d, " D_BYTES " %d"), settings_location, Settings.save_flag, sizeof(SYSCFG)); settings_crc32 = Settings.cfg_crc32; } #endif // FIRMWARE_MINIMAL RtcSettingsSave(); } void SettingsLoad(void) { // Load configuration from eeprom or one of 7 slots below if first valid load does not stop_flash_rotate struct SYSCFGH { uint16_t cfg_holder; // 000 uint16_t cfg_size; // 002 unsigned long save_flag; // 004 } _SettingsH; unsigned long save_flag = 0; settings_location = 0; uint32_t flash_location = SETTINGS_LOCATION +1; uint16_t cfg_holder = 0; for (uint32_t i = 0; i < CFG_ROTATES; i++) { flash_location--; ESP.flashRead(flash_location * SPI_FLASH_SEC_SIZE, (uint32*)&Settings, sizeof(SYSCFG)); bool valid = false; if (Settings.version > 0x06000000) { bool almost_valid = (Settings.cfg_crc32 == GetSettingsCrc32()); if (Settings.version < 0x0606000B) { almost_valid = (Settings.cfg_crc == GetSettingsCrc()); } // Sometimes CRC on pages below FB, overwritten by OTA, is fine but Settings are still invalid. So check cfg_holder too if (almost_valid && (0 == cfg_holder)) { cfg_holder = Settings.cfg_holder; } // At FB always active cfg_holder valid = (cfg_holder == Settings.cfg_holder); } else { ESP.flashRead((flash_location -1) * SPI_FLASH_SEC_SIZE, (uint32*)&_SettingsH, sizeof(SYSCFGH)); valid = (Settings.cfg_holder == _SettingsH.cfg_holder); } if (valid) { if (Settings.save_flag > save_flag) { save_flag = Settings.save_flag; settings_location = flash_location; if (Settings.flag.stop_flash_rotate && (0 == i)) { // Stop only if eeprom area should be used and it is valid break; } } } delay(1); } if (settings_location > 0) { ESP.flashRead(settings_location * SPI_FLASH_SEC_SIZE, (uint32*)&Settings, sizeof(SYSCFG)); AddLog_P2(LOG_LEVEL_NONE, PSTR(D_LOG_CONFIG D_LOADED_FROM_FLASH_AT " %X, " D_COUNT " %lu"), settings_location, Settings.save_flag); } #ifndef FIRMWARE_MINIMAL if (!settings_location || (Settings.cfg_holder != (uint16_t)CFG_HOLDER)) { // Init defaults if cfg_holder differs from user settings in my_user_config.h SettingsDefault(); } settings_crc32 = GetSettingsCrc32(); #endif // FIRMWARE_MINIMAL SettingsInitText(); RtcSettingsLoad(); } void EspErase(uint32_t start_sector, uint32_t end_sector) { bool serial_output = (LOG_LEVEL_DEBUG_MORE <= seriallog_level); for (uint32_t sector = start_sector; sector < end_sector; sector++) { bool result = ESP.flashEraseSector(sector); // Arduino core - erases flash as seen by SDK // bool result = !SPIEraseSector(sector); // SDK - erases flash as seen by SDK // bool result = EsptoolEraseSector(sector); // Esptool - erases flash completely (slow) if (serial_output) { Serial.printf_P(PSTR(D_LOG_APPLICATION D_ERASED_SECTOR " %d %s\n"), sector, (result) ? D_OK : D_ERROR); delay(10); } else { yield(); } OsWatchLoop(); } } void SettingsErase(uint8_t type) { /* For Arduino core and SDK: Erase only works from flash start address to SDK recognized flash end address (flashchip->chip_size = ESP.getFlashChipSize). Addresses above SDK recognized size (up to ESP.getFlashChipRealSize) are not accessable. For Esptool: The only way to erase whole flash is esptool which uses direct SPI writes to flash. The default erase function is EspTool (EsptoolErase) 0 = Erase from program end until end of flash as seen by SDK 1 = Erase 16k SDK parameter area near end of flash as seen by SDK (0x0xFCxxx - 0x0xFFFFF) solving possible wifi errors 2 = Erase Tasmota parameter area (0x0xF3xxx - 0x0xFBFFF) 3 = Erase Tasmota and SDK parameter area (0x0F3xxx - 0x0FFFFF) */ #ifndef FIRMWARE_MINIMAL uint32_t _sectorStart = (ESP.getSketchSize() / SPI_FLASH_SEC_SIZE) + 1; uint32_t _sectorEnd = ESP.getFlashChipRealSize() / SPI_FLASH_SEC_SIZE; // Flash size as reported by hardware if (1 == type) { // source Esp.cpp and core_esp8266_phy.cpp _sectorStart = (ESP.getFlashChipSize() / SPI_FLASH_SEC_SIZE) - 4; // SDK parameter area } else if (2 == type) { _sectorStart = SETTINGS_LOCATION - CFG_ROTATES; // Tasmota parameter area (0x0F3xxx - 0x0FBFFF) _sectorEnd = SETTINGS_LOCATION +1; } else if (3 == type) { _sectorStart = SETTINGS_LOCATION - CFG_ROTATES; // Tasmota and SDK parameter area (0x0F3xxx - 0x0FFFFF) _sectorEnd = ESP.getFlashChipSize() / SPI_FLASH_SEC_SIZE; // Flash size as seen by SDK } AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_ERASE " %d " D_UNIT_SECTORS), _sectorEnd - _sectorStart); // EspErase(_sectorStart, _sectorEnd); // Arduino core and SDK - erases flash as seen by SDK EsptoolErase(_sectorStart, _sectorEnd); // Esptool - erases flash completely #endif // FIRMWARE_MINIMAL } void SettingsSdkErase(void) { WiFi.disconnect(true); // Delete SDK wifi config SettingsErase(1); delay(1000); } /********************************************************************************************/ void SettingsDefault(void) { AddLog_P(LOG_LEVEL_NONE, PSTR(D_LOG_CONFIG D_USE_DEFAULTS)); SettingsDefaultSet1(); SettingsDefaultSet2(); SettingsSave(2); } void SettingsDefaultSet1(void) { memset(&Settings, 0x00, sizeof(SYSCFG)); Settings.cfg_holder = (uint16_t)CFG_HOLDER; Settings.cfg_size = sizeof(SYSCFG); // Settings.save_flag = 0; Settings.version = VERSION; // Settings.bootcount = 0; // Settings.cfg_crc = 0; } void SettingsDefaultSet2(void) { memset((char*)&Settings +16, 0x00, sizeof(SYSCFG) -16); // Settings.flag.value_units = 0; // Settings.flag.stop_flash_rotate = 0; Settings.save_data = SAVE_DATA; Settings.param[P_BACKLOG_DELAY] = MIN_BACKLOG_DELAY; Settings.param[P_BOOT_LOOP_OFFSET] = BOOT_LOOP_OFFSET; // SetOption36 Settings.param[P_RGB_REMAP] = RGB_REMAP_RGBW; Settings.sleep = APP_SLEEP; if (Settings.sleep < 50) { Settings.sleep = 50; // Default to 50 for sleep, for now } // Module // Settings.flag.interlock = 0; Settings.interlock[0] = 0xFF; // Legacy support using all relays in one interlock group Settings.module = MODULE; ModuleDefault(WEMOS); // for (uint32_t i = 0; i < sizeof(Settings.my_gp); i++) { Settings.my_gp.io[i] = GPIO_NONE; } strlcpy(Settings.friendlyname[0], FRIENDLY_NAME, sizeof(Settings.friendlyname[0])); strlcpy(Settings.friendlyname[1], FRIENDLY_NAME"2", sizeof(Settings.friendlyname[1])); strlcpy(Settings.friendlyname[2], FRIENDLY_NAME"3", sizeof(Settings.friendlyname[2])); strlcpy(Settings.friendlyname[3], FRIENDLY_NAME"4", sizeof(Settings.friendlyname[3])); strlcpy(Settings.ota_url, OTA_URL, sizeof(Settings.ota_url)); // Power Settings.flag.save_state = SAVE_STATE; Settings.power = APP_POWER; Settings.poweronstate = APP_POWERON_STATE; Settings.blinktime = APP_BLINKTIME; Settings.blinkcount = APP_BLINKCOUNT; Settings.ledstate = APP_LEDSTATE; Settings.ledmask = APP_LEDMASK; Settings.pulse_timer[0] = APP_PULSETIME; // for (uint32_t i = 1; i < MAX_PULSETIMERS; i++) { Settings.pulse_timer[i] = 0; } // Serial Settings.serial_config = TS_SERIAL_8N1; Settings.baudrate = APP_BAUDRATE / 300; Settings.sbaudrate = SOFT_BAUDRATE / 300; Settings.serial_delimiter = 0xff; Settings.seriallog_level = SERIAL_LOG_LEVEL; // Wifi Settings.wifi_output_power = 170; ParseIp(&Settings.ip_address[0], WIFI_IP_ADDRESS); ParseIp(&Settings.ip_address[1], WIFI_GATEWAY); ParseIp(&Settings.ip_address[2], WIFI_SUBNETMASK); ParseIp(&Settings.ip_address[3], WIFI_DNS); Settings.sta_config = WIFI_CONFIG_TOOL; // Settings.sta_active = 0; strlcpy(Settings.sta_ssid[0], STA_SSID1, sizeof(Settings.sta_ssid[0])); strlcpy(Settings.sta_pwd[0], STA_PASS1, sizeof(Settings.sta_pwd[0])); strlcpy(Settings.sta_ssid[1], STA_SSID2, sizeof(Settings.sta_ssid[1])); strlcpy(Settings.sta_pwd[1], STA_PASS2, sizeof(Settings.sta_pwd[1])); strlcpy(Settings.hostname, WIFI_HOSTNAME, sizeof(Settings.hostname)); // Syslog strlcpy(Settings.syslog_host, SYS_LOG_HOST, sizeof(Settings.syslog_host)); Settings.syslog_port = SYS_LOG_PORT; Settings.syslog_level = SYS_LOG_LEVEL; // Webserver Settings.flag2.emulation = EMULATION; Settings.webserver = WEB_SERVER; Settings.weblog_level = WEB_LOG_LEVEL; strlcpy(Settings.web_password, WEB_PASSWORD, sizeof(Settings.web_password)); Settings.flag3.mdns_enabled = MDNS_ENABLED; strlcpy(Settings.cors_domain, CORS_DOMAIN, sizeof(Settings.cors_domain)); // Button // Settings.flag.button_restrict = 0; // Settings.flag.button_swap = 0; // Settings.flag.button_single = 0; Settings.param[P_HOLD_TIME] = KEY_HOLD_TIME; // Default 4 seconds hold time // Switch for (uint32_t i = 0; i < MAX_SWITCHES; i++) { Settings.switchmode[i] = SWITCH_MODE; } // MQTT Settings.flag.mqtt_enabled = MQTT_USE; // Settings.flag.mqtt_response = 0; Settings.flag.mqtt_power_retain = MQTT_POWER_RETAIN; Settings.flag.mqtt_button_retain = MQTT_BUTTON_RETAIN; Settings.flag.mqtt_switch_retain = MQTT_SWITCH_RETAIN; Settings.flag3.button_switch_force_local = MQTT_BUTTON_SWITCH_FORCE_LOCAL; Settings.flag3.hass_tele_on_power = TELE_ON_POWER; // Settings.flag.mqtt_sensor_retain = 0; // Settings.flag.mqtt_offline = 0; // Settings.flag.mqtt_serial = 0; // Settings.flag.device_index_enable = 0; strlcpy(Settings.mqtt_host, MQTT_HOST, sizeof(Settings.mqtt_host)); Settings.mqtt_port = MQTT_PORT; strlcpy(Settings.mqtt_client, MQTT_CLIENT_ID, sizeof(Settings.mqtt_client)); strlcpy(Settings.mqtt_user, MQTT_USER, sizeof(Settings.mqtt_user)); strlcpy(Settings.mqtt_pwd, MQTT_PASS, sizeof(Settings.mqtt_pwd)); strlcpy(Settings.mqtt_topic, MQTT_TOPIC, sizeof(Settings.mqtt_topic)); strlcpy(Settings.button_topic, MQTT_BUTTON_TOPIC, sizeof(Settings.button_topic)); strlcpy(Settings.switch_topic, MQTT_SWITCH_TOPIC, sizeof(Settings.switch_topic)); strlcpy(Settings.mqtt_grptopic, MQTT_GRPTOPIC, sizeof(Settings.mqtt_grptopic)); strlcpy(Settings.mqtt_fulltopic, MQTT_FULLTOPIC, sizeof(Settings.mqtt_fulltopic)); Settings.mqtt_retry = MQTT_RETRY_SECS; strlcpy(Settings.mqtt_prefix[0], SUB_PREFIX, sizeof(Settings.mqtt_prefix[0])); strlcpy(Settings.mqtt_prefix[1], PUB_PREFIX, sizeof(Settings.mqtt_prefix[1])); strlcpy(Settings.mqtt_prefix[2], PUB_PREFIX2, sizeof(Settings.mqtt_prefix[2])); strlcpy(Settings.state_text[0], MQTT_STATUS_OFF, sizeof(Settings.state_text[0])); strlcpy(Settings.state_text[1], MQTT_STATUS_ON, sizeof(Settings.state_text[1])); strlcpy(Settings.state_text[2], MQTT_CMND_TOGGLE, sizeof(Settings.state_text[2])); strlcpy(Settings.state_text[3], MQTT_CMND_HOLD, sizeof(Settings.state_text[3])); char fingerprint[60]; strlcpy(fingerprint, MQTT_FINGERPRINT1, sizeof(fingerprint)); char *p = fingerprint; for (uint32_t i = 0; i < 20; i++) { Settings.mqtt_fingerprint[0][i] = strtol(p, &p, 16); } strlcpy(fingerprint, MQTT_FINGERPRINT2, sizeof(fingerprint)); p = fingerprint; for (uint32_t i = 0; i < 20; i++) { Settings.mqtt_fingerprint[1][i] = strtol(p, &p, 16); } Settings.tele_period = TELE_PERIOD; Settings.mqttlog_level = MQTT_LOG_LEVEL; // Energy Settings.flag2.current_resolution = 3; // Settings.flag2.voltage_resolution = 0; // Settings.flag2.wattage_resolution = 0; Settings.flag2.energy_resolution = ENERGY_RESOLUTION; Settings.param[P_MAX_POWER_RETRY] = MAX_POWER_RETRY; // Settings.energy_power_delta = 0; Settings.energy_power_calibration = HLW_PREF_PULSE; Settings.energy_voltage_calibration = HLW_UREF_PULSE; Settings.energy_current_calibration = HLW_IREF_PULSE; // Settings.energy_kWhtoday = 0; // Settings.energy_kWhyesterday = 0; // Settings.energy_kWhdoy = 0; // Settings.energy_min_power = 0; // Settings.energy_max_power = 0; // Settings.energy_min_voltage = 0; // Settings.energy_max_voltage = 0; // Settings.energy_min_current = 0; // Settings.energy_max_current = 0; // Settings.energy_max_power_limit = 0; // MaxPowerLimit Settings.energy_max_power_limit_hold = MAX_POWER_HOLD; Settings.energy_max_power_limit_window = MAX_POWER_WINDOW; // Settings.energy_max_power_safe_limit = 0; // MaxSafePowerLimit Settings.energy_max_power_safe_limit_hold = SAFE_POWER_HOLD; Settings.energy_max_power_safe_limit_window = SAFE_POWER_WINDOW; // Settings.energy_max_energy = 0; // MaxEnergy // Settings.energy_max_energy_start = 0; // MaxEnergyStart // Settings.energy_kWhtotal = 0; RtcSettings.energy_kWhtotal = 0; // memset((char*)&Settings.energy_usage, 0x00, sizeof(Settings.energy_usage)); memset((char*)&RtcSettings.energy_usage, 0x00, sizeof(RtcSettings.energy_usage)); Settings.param[P_OVER_TEMP] = ENERGY_OVERTEMP; // IRRemote Settings.param[P_IR_UNKNOW_THRESHOLD] = IR_RCV_MIN_UNKNOWN_SIZE; // RF Bridge // for (uint32_t i = 0; i < 17; i++) { Settings.rf_code[i][0] = 0; } memcpy_P(Settings.rf_code[0], kDefaultRfCode, 9); // Domoticz Settings.domoticz_update_timer = DOMOTICZ_UPDATE_TIMER; // for (uint32_t i = 0; i < MAX_DOMOTICZ_IDX; i++) { // Settings.domoticz_relay_idx[i] = 0; // Settings.domoticz_key_idx[i] = 0; // Settings.domoticz_switch_idx[i] = 0; // } // for (uint32_t i = 0; i < MAX_DOMOTICZ_SNS_IDX; i++) { // Settings.domoticz_sensor_idx[i] = 0; // } // Sensor Settings.flag.temperature_conversion = TEMP_CONVERSION; Settings.flag.pressure_conversion = PRESSURE_CONVERSION; Settings.flag2.pressure_resolution = PRESSURE_RESOLUTION; Settings.flag2.humidity_resolution = HUMIDITY_RESOLUTION; Settings.flag2.temperature_resolution = TEMP_RESOLUTION; // Settings.altitude = 0; // Rules // Settings.rule_enabled = 0; // Settings.rule_once = 0; // for (uint32_t i = 1; i < MAX_RULE_SETS; i++) { Settings.rules[i][0] = '\0'; } Settings.flag2.calc_resolution = CALC_RESOLUTION; // Home Assistant Settings.flag.hass_discovery = HOME_ASSISTANT_DISCOVERY_ENABLE; // Knx // Settings.flag.knx_enabled = 0; // Settings.flag.knx_enable_enhancement = 0; // Light Settings.flag.pwm_control = 1; //Settings.flag.ws_clock_reverse = 0; //Settings.flag.light_signal = 0; //Settings.flag.not_power_linked = 0; //Settings.flag.decimal_text = 0; Settings.pwm_frequency = PWM_FREQ; Settings.pwm_range = PWM_RANGE; for (uint32_t i = 0; i < MAX_PWMS; i++) { Settings.light_color[i] = DEFAULT_LIGHT_COMPONENT; // Settings.pwm_value[i] = 0; } Settings.light_correction = 1; Settings.light_dimmer = DEFAULT_LIGHT_DIMMER; // Settings.light_fade = 0; Settings.light_speed = 1; // Settings.light_scheme = 0; Settings.light_width = 1; // Settings.light_wakeup = 0; Settings.light_pixels = WS2812_LEDS; // Settings.light_rotation = 0; Settings.ws_width[WS_SECOND] = 1; Settings.ws_color[WS_SECOND][WS_RED] = 255; // Settings.ws_color[WS_SECOND][WS_GREEN] = 0; Settings.ws_color[WS_SECOND][WS_BLUE] = 255; Settings.ws_width[WS_MINUTE] = 3; // Settings.ws_color[WS_MINUTE][WS_RED] = 0; Settings.ws_color[WS_MINUTE][WS_GREEN] = 255; // Settings.ws_color[WS_MINUTE][WS_BLUE] = 0; Settings.ws_width[WS_HOUR] = 5; Settings.ws_color[WS_HOUR][WS_RED] = 255; // Settings.ws_color[WS_HOUR][WS_GREEN] = 0; // Settings.ws_color[WS_HOUR][WS_BLUE] = 0; Settings.dimmer_hw_max = DEFAULT_DIMMER_MAX; Settings.dimmer_hw_min = DEFAULT_DIMMER_MIN; // Display // Settings.display_model = 0; Settings.display_mode = 1; Settings.display_refresh = 2; Settings.display_rows = 2; Settings.display_cols[0] = 16; Settings.display_cols[1] = 8; Settings.display_dimmer = 1; Settings.display_size = 1; Settings.display_font = 1; // Settings.display_rotate = 0; Settings.display_address[0] = MTX_ADDRESS1; Settings.display_address[1] = MTX_ADDRESS2; Settings.display_address[2] = MTX_ADDRESS3; Settings.display_address[3] = MTX_ADDRESS4; Settings.display_address[4] = MTX_ADDRESS5; Settings.display_address[5] = MTX_ADDRESS6; Settings.display_address[6] = MTX_ADDRESS7; Settings.display_address[7] = MTX_ADDRESS8; // Time if (((APP_TIMEZONE > -14) && (APP_TIMEZONE < 15)) || (99 == APP_TIMEZONE)) { Settings.timezone = APP_TIMEZONE; Settings.timezone_minutes = 0; } else { Settings.timezone = APP_TIMEZONE / 60; Settings.timezone_minutes = abs(APP_TIMEZONE % 60); } strlcpy(Settings.ntp_server[0], NTP_SERVER1, sizeof(Settings.ntp_server[0])); strlcpy(Settings.ntp_server[1], NTP_SERVER2, sizeof(Settings.ntp_server[1])); strlcpy(Settings.ntp_server[2], NTP_SERVER3, sizeof(Settings.ntp_server[2])); for (uint32_t j = 0; j < 3; j++) { for (uint32_t i = 0; i < strlen(Settings.ntp_server[j]); i++) { if (Settings.ntp_server[j][i] == ',') { Settings.ntp_server[j][i] = '.'; } } } Settings.latitude = (int)((double)LATITUDE * 1000000); Settings.longitude = (int)((double)LONGITUDE * 1000000); SettingsResetStd(); SettingsResetDst(); Settings.button_debounce = KEY_DEBOUNCE_TIME; Settings.switch_debounce = SWITCH_DEBOUNCE_TIME; for (uint32_t j = 0; j < 5; j++) { Settings.rgbwwTable[j] = 255; } Settings.novasds_startingoffset = STARTING_OFFSET; SettingsDefaultWebColor(); memset(&Settings.monitors, 0xFF, 20); // Enable all possible monitors, displays and sensors SettingsEnableAllI2cDrivers(); } /********************************************************************************************/ void SettingsResetStd(void) { Settings.tflag[0].hemis = TIME_STD_HEMISPHERE; Settings.tflag[0].week = TIME_STD_WEEK; Settings.tflag[0].dow = TIME_STD_DAY; Settings.tflag[0].month = TIME_STD_MONTH; Settings.tflag[0].hour = TIME_STD_HOUR; Settings.toffset[0] = TIME_STD_OFFSET; } void SettingsResetDst(void) { Settings.tflag[1].hemis = TIME_DST_HEMISPHERE; Settings.tflag[1].week = TIME_DST_WEEK; Settings.tflag[1].dow = TIME_DST_DAY; Settings.tflag[1].month = TIME_DST_MONTH; Settings.tflag[1].hour = TIME_DST_HOUR; Settings.toffset[1] = TIME_DST_OFFSET; } void SettingsDefaultWebColor(void) { char scolor[10]; for (uint32_t i = 0; i < COL_LAST; i++) { WebHexCode(i, GetTextIndexed(scolor, sizeof(scolor), i, kWebColors)); } } void SettingsEnableAllI2cDrivers(void) { Settings.i2c_drivers[0] = 0xFFFFFFFF; Settings.i2c_drivers[1] = 0xFFFFFFFF; Settings.i2c_drivers[2] = 0xFFFFFFFF; } /********************************************************************************************/ void SettingsDelta(void) { if (Settings.version != VERSION) { // Fix version dependent changes if (Settings.version < 0x06000000) { Settings.cfg_size = sizeof(SYSCFG); Settings.cfg_crc = GetSettingsCrc(); } if (Settings.version < 0x06000002) { for (uint32_t i = 0; i < MAX_SWITCHES; i++) { if (i < 4) { Settings.switchmode[i] = Settings.interlock[i]; } else { Settings.switchmode[i] = SWITCH_MODE; } } for (uint32_t i = 0; i < sizeof(Settings.my_gp); i++) { if (Settings.my_gp.io[i] >= GPIO_SWT5) { // Move up from GPIO_SWT5 to GPIO_KEY1 Settings.my_gp.io[i] += 4; } } } if (Settings.version < 0x06000003) { Settings.flag.mqtt_serial_raw = 0; // Was rules_enabled until 5.14.0b Settings.flag.pressure_conversion = 0; // Was rules_once until 5.14.0b Settings.flag3.data = 0; } if (Settings.version < 0x06010103) { Settings.flag3.timers_enable = 1; } if (Settings.version < 0x0601010C) { Settings.button_debounce = KEY_DEBOUNCE_TIME; Settings.switch_debounce = SWITCH_DEBOUNCE_TIME; } if (Settings.version < 0x0602010A) { for (uint32_t j = 0; j < 5; j++) { Settings.rgbwwTable[j] = 255; } } if (Settings.version < 0x06030002) { Settings.timezone_minutes = 0; } if (Settings.version < 0x06030004) { memset(&Settings.monitors, 0xFF, 20); // Enable all possible monitors, displays and sensors } if (Settings.version < 0x0603000E) { Settings.flag2.calc_resolution = CALC_RESOLUTION; } if (Settings.version < 0x0603000F) { if (Settings.sleep < 50) { Settings.sleep = 50; // Default to 50 for sleep, for now } } if (Settings.version < 0x06040105) { Settings.flag3.mdns_enabled = MDNS_ENABLED; Settings.param[P_MDNS_DELAYED_START] = 0; } if (Settings.version < 0x0604010B) { Settings.interlock[0] = 0xFF; // Legacy support using all relays in one interlock group for (uint32_t i = 1; i < MAX_INTERLOCKS; i++) { Settings.interlock[i] = 0; } } if (Settings.version < 0x0604010D) { Settings.param[P_BOOT_LOOP_OFFSET] = BOOT_LOOP_OFFSET; // SetOption36 } if (Settings.version < 0x06040110) { ModuleDefault(WEMOS); } if (Settings.version < 0x06040113) { Settings.param[P_RGB_REMAP] = RGB_REMAP_RGBW; } if (Settings.version < 0x06050003) { Settings.novasds_startingoffset = STARTING_OFFSET; } if (Settings.version < 0x06050006) { SettingsDefaultWebColor(); } if (Settings.version < 0x06050007) { Settings.ledmask = APP_LEDMASK; } if (Settings.version < 0x0605000A) { Settings.my_adc0 = ADC0_NONE; } if (Settings.version < 0x0605000D) { Settings.param[P_IR_UNKNOW_THRESHOLD] = IR_RCV_MIN_UNKNOWN_SIZE; } if (Settings.version < 0x06060001) { Settings.param[P_OVER_TEMP] = ENERGY_OVERTEMP; } if (Settings.version < 0x06060007) { memset((char*)&Settings +0xE00, 0x00, sizeof(SYSCFG) -0xE00); } if (Settings.version < 0x06060008) { // Move current tuya dimmer range to the new param. if (Settings.flag3.tuya_serial_mqtt_publish) { // ex Settings.flag3.ex_tuya_dimmer_range_255 SetOption Settings.param[P_ex_DIMMER_MAX] = 100; } else { Settings.param[P_ex_DIMMER_MAX] = 255; } } if (Settings.version < 0x06060009) { Settings.baudrate = Settings.ex_baudrate * 4; Settings.sbaudrate = Settings.ex_sbaudrate * 4; } if (Settings.version < 0x0606000A) { uint8_t tuyaindex = 0; if (Settings.param[P_BACKLOG_DELAY] > 0) { // ex SetOption34 Settings.tuya_fnid_map[tuyaindex].fnid = 21; // TUYA_MCU_FUNC_DIMMER - Move Tuya Dimmer Id to Map Settings.tuya_fnid_map[tuyaindex].dpid = Settings.param[P_BACKLOG_DELAY]; tuyaindex++; } else if (Settings.flag3.fast_power_cycle_disable == 1) { // ex SetOption65 Settings.tuya_fnid_map[tuyaindex].fnid = 11; // TUYA_MCU_FUNC_REL1 - Create FnID for Switches Settings.tuya_fnid_map[tuyaindex].dpid = 1; tuyaindex++; } if (Settings.param[P_ex_TUYA_RELAYS] > 0) { for (uint8_t i = 0 ; i < Settings.param[P_ex_TUYA_RELAYS]; i++) { // ex SetOption41 Settings.tuya_fnid_map[tuyaindex].fnid = 12 + i; // TUYA_MCU_FUNC_REL2 - Create FnID for Switches Settings.tuya_fnid_map[tuyaindex].dpid = i + 2; tuyaindex++; } } if (Settings.param[P_ex_TUYA_POWER_ID] > 0) { // ex SetOption46 Settings.tuya_fnid_map[tuyaindex].fnid = 31; // TUYA_MCU_FUNC_POWER - Move Tuya Power Id to Map Settings.tuya_fnid_map[tuyaindex].dpid = Settings.param[P_ex_TUYA_POWER_ID]; tuyaindex++; } if (Settings.param[P_ex_TUYA_VOLTAGE_ID] > 0) { // ex SetOption44 Settings.tuya_fnid_map[tuyaindex].fnid = 33; // TUYA_MCU_FUNC_VOLTAGE - Move Tuya Voltage Id to Map Settings.tuya_fnid_map[tuyaindex].dpid = Settings.param[P_ex_TUYA_VOLTAGE_ID]; tuyaindex++; } if (Settings.param[P_ex_TUYA_CURRENT_ID] > 0) { // ex SetOption45 Settings.tuya_fnid_map[tuyaindex].fnid = 32; // TUYA_MCU_FUNC_CURRENT - Move Tuya Current Id to Map Settings.tuya_fnid_map[tuyaindex].dpid = Settings.param[P_ex_TUYA_CURRENT_ID]; } } if (Settings.version < 0x0606000C) { memset((char*)&Settings +0x1D6, 0x00, 16); } if (Settings.version < 0x0606000F) { Settings.shutter_accuracy = 0; Settings.mqttlog_level = MQTT_LOG_LEVEL; } if (Settings.version < 0x06060011) { Settings.param[P_BACKLOG_DELAY] = MIN_BACKLOG_DELAY; } if (Settings.version < 0x06060012) { Settings.dimmer_hw_min = DEFAULT_DIMMER_MIN; Settings.dimmer_hw_max = DEFAULT_DIMMER_MAX; if (TUYA_DIMMER == Settings.module) { if (Settings.flag3.ex_tuya_dimmer_min_limit) { Settings.dimmer_hw_min = 25; } else { Settings.dimmer_hw_min = 1; } Settings.dimmer_hw_max = Settings.param[P_ex_DIMMER_MAX]; } else if (PS_16_DZ == Settings.module) { Settings.dimmer_hw_min = 10; Settings.dimmer_hw_max = Settings.param[P_ex_DIMMER_MAX]; } } if (Settings.version < 0x06060014) { // Clear unused parameters for future use /* Settings.flag3.tuya_serial_mqtt_publish = 0; // ex Settings.flag3.ex_tuya_dimmer_range_255 Settings.flag3.ex_tuya_dimmer_min_limit = 0; Settings.param[P_ex_TUYA_RELAYS] = 0; Settings.param[P_ex_DIMMER_MAX] = 0; Settings.param[P_ex_TUYA_VOLTAGE_ID] = 0; Settings.param[P_ex_TUYA_CURRENT_ID] = 0; Settings.param[P_ex_TUYA_POWER_ID] = 0; Settings.ex_baudrate = 0; Settings.ex_sbaudrate = 0; */ Settings.flag3.fast_power_cycle_disable = 0; Settings.energy_power_delta = Settings.ex_energy_power_delta; Settings.ex_energy_power_delta = 0; } if (Settings.version < 0x06060015) { if ((EX_WIFI_SMARTCONFIG == Settings.sta_config) || (EX_WIFI_WPSCONFIG == Settings.sta_config)) { Settings.sta_config = WIFI_MANAGER; } } if (Settings.version < 0x07000002) { Settings.web_color2[0][0] = Settings.web_color[0][0]; Settings.web_color2[0][1] = Settings.web_color[0][1]; Settings.web_color2[0][2] = Settings.web_color[0][2]; } if (Settings.version < 0x07000003) { SettingsEnableAllI2cDrivers(); } if (Settings.version < 0x07000004) { Settings.wifi_output_power = 170; } if (Settings.version < 0x07010202) { Settings.serial_config = TS_SERIAL_8N1; } if (Settings.version < 0x07010204) { if (Settings.flag3.ex_cors_enabled == 1) { strlcpy(Settings.cors_domain, CORS_ENABLED_ALL, sizeof(Settings.cors_domain)); } else { Settings.cors_domain[0] = 0; } } Settings.version = VERSION; SettingsSave(1); } }