/* sonoff_template.h - template settings for Sonoff-Tasmota Copyright (C) 2019 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _SONOFF_TEMPLATE_H_ #define _SONOFF_TEMPLATE_H_ // User selectable GPIO functionality // ATTENTION: Only add at the end of this list just before GPIO_SENSOR_END // Then add the same name(s) in a nice location in array kGpioNiceList enum UserSelectablePins { GPIO_NONE, // Not used GPIO_DHT11, // DHT11 GPIO_DHT22, // DHT21, DHT22, AM2301, AM2302, AM2321 GPIO_SI7021, // iTead SI7021 GPIO_DSB, // Single wire DS18B20 or DS18S20 GPIO_I2C_SCL, // I2C SCL GPIO_I2C_SDA, // I2C SDA GPIO_WS2812, // WS2812 Led string GPIO_IRSEND, // IR remote GPIO_SWT1, // User connected external switches GPIO_SWT2, GPIO_SWT3, GPIO_SWT4, GPIO_SWT5, GPIO_SWT6, GPIO_SWT7, GPIO_SWT8, GPIO_KEY1, // Button usually connected to GPIO0 GPIO_KEY2, GPIO_KEY3, GPIO_KEY4, GPIO_REL1, // Relays GPIO_REL2, GPIO_REL3, GPIO_REL4, GPIO_REL5, GPIO_REL6, GPIO_REL7, GPIO_REL8, GPIO_REL1_INV, GPIO_REL2_INV, GPIO_REL3_INV, GPIO_REL4_INV, GPIO_REL5_INV, GPIO_REL6_INV, GPIO_REL7_INV, GPIO_REL8_INV, GPIO_PWM1, // RGB Red or C Cold White GPIO_PWM2, // RGB Green or CW Warm White GPIO_PWM3, // RGB Blue GPIO_PWM4, // RGBW (Cold) White GPIO_PWM5, // RGBCW Warm White GPIO_CNTR1, GPIO_CNTR2, GPIO_CNTR3, GPIO_CNTR4, GPIO_PWM1_INV, // RGB Red or C Cold White GPIO_PWM2_INV, // RGB Green or CW Warm White GPIO_PWM3_INV, // RGB Blue GPIO_PWM4_INV, // RGBW (Cold) White GPIO_PWM5_INV, // RGBCW Warm White GPIO_IRRECV, // IR receiver GPIO_LED1, // Leds GPIO_LED2, GPIO_LED3, GPIO_LED4, GPIO_LED1_INV, GPIO_LED2_INV, GPIO_LED3_INV, GPIO_LED4_INV, GPIO_MHZ_TXD, // MH-Z19 Serial interface GPIO_MHZ_RXD, // MH-Z19 Serial interface GPIO_PZEM0XX_TX, // PZEM0XX Serial interface GPIO_PZEM004_RX, // PZEM004T Serial interface GPIO_SAIR_TX, // SenseAir Serial interface GPIO_SAIR_RX, // SenseAir Serial interface GPIO_SPI_CS, // SPI Chip Select GPIO_SPI_DC, // SPI Data Direction GPIO_BACKLIGHT, // Display backlight control GPIO_PMS5003, // Plantower PMS5003 Serial interface GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface GPIO_SBR_TX, // Serial Bridge Serial interface GPIO_SBR_RX, // Serial Bridge Serial interface GPIO_SR04_TRIG, // SR04 Trigger pin GPIO_SR04_ECHO, // SR04 Echo pin GPIO_SDM120_TX, // SDM120 Serial interface GPIO_SDM120_RX, // SDM120 Serial interface GPIO_SDM630_TX, // SDM630 Serial interface GPIO_SDM630_RX, // SDM630 Serial interface GPIO_TM16CLK, // TM1638 Clock GPIO_TM16DIO, // TM1638 Data I/O GPIO_TM16STB, // TM1638 Strobe GPIO_SWT1_NP, // User connected external switches GPIO_SWT2_NP, GPIO_SWT3_NP, GPIO_SWT4_NP, GPIO_SWT5_NP, GPIO_SWT6_NP, GPIO_SWT7_NP, GPIO_SWT8_NP, GPIO_KEY1_NP, // Button usually connected to GPIO0 GPIO_KEY2_NP, GPIO_KEY3_NP, GPIO_KEY4_NP, GPIO_CNTR1_NP, GPIO_CNTR2_NP, GPIO_CNTR3_NP, GPIO_CNTR4_NP, GPIO_PZEM016_RX, // PZEM-014,016 Serial Modbus interface GPIO_PZEM017_RX, // PZEM-003,017 Serial Modbus interface GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player GPIO_SDS0X1_TX, // Nova Fitness SDS011 Serial interface GPIO_HX711_SCK, // HX711 Load Cell clock GPIO_HX711_DAT, // HX711 Load Cell data GPIO_TX20_TXD_BLACK, // TX20 Transmission Pin GPIO_RFSEND, // RF transmitter GPIO_RFRECV, // RF receiver GPIO_TUYA_TX, // Tuya Serial interface GPIO_TUYA_RX, // Tuya Serial interface GPIO_MGC3130_XFER, // MGC3130 Transfer GPIO_MGC3130_RESET, // MGC3130 Reset GPIO_SSPI_MISO, // Software SPI Master Input Slave Output GPIO_SSPI_MOSI, // Software SPI Master Output Slave Input GPIO_SSPI_SCLK, // Software SPI Serial Clock GPIO_SSPI_CS, // Software SPI Chip Select GPIO_SSPI_DC, // Software SPI Data or Command GPIO_RF_SENSOR, // Rf receiver with sensor decoding GPIO_AZ_TXD, // AZ-Instrument 7798 Serial interface GPIO_AZ_RXD, // AZ-Instrument 7798 Serial interface GPIO_MAX31855CS, // MAX31855 Serial interface GPIO_MAX31855CLK, // MAX31855 Serial interface GPIO_MAX31855DO, // MAX31855 Serial interface GPIO_KEY1_INV, // Inverted buttons GPIO_KEY2_INV, GPIO_KEY3_INV, GPIO_KEY4_INV, GPIO_KEY1_INV_NP, // Inverted buttons without pull-up GPIO_KEY2_INV_NP, GPIO_KEY3_INV_NP, GPIO_KEY4_INV_NP, GPIO_NRG_SEL, // HLW8012/HLJ-01 Sel output (1 = Voltage) GPIO_NRG_SEL_INV, // HLW8012/HLJ-01 Sel output (0 = Voltage) GPIO_NRG_CF1, // HLW8012/HLJ-01 CF1 voltage / current GPIO_HLW_CF, // HLW8012 CF power GPIO_HJL_CF, // HJL-01/BL0937 CF power GPIO_MCP39F5_TX, // MCP39F501 Serial interface (Shelly2) GPIO_MCP39F5_RX, // MCP39F501 Serial interface (Shelly2) GPIO_MCP39F5_RST, // MCP39F501 Reset (Shelly2) GPIO_PN532_TXD, // PN532 NFC Serial Tx GPIO_PN532_RXD, // PN532 NFC Serial Rx GPIO_SM16716_CLK, // SM16716 CLOCK GPIO_SM16716_DAT, // SM16716 DATA GPIO_SM16716_SEL, // SM16716 SELECT GPIO_DI, // my92x1 PWM input GPIO_DCKI, // my92x1 CLK input GPIO_CSE7766_TX, // CSE7766 Serial interface (S31 and Pow R2) GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2) GPIO_ARIRFRCV, // AriLux RF Receive input GPIO_TXD, // Serial interface GPIO_RXD, // Serial interface GPIO_ROT1A, // Rotary switch1 A Pin GPIO_ROT1B, // Rotary switch1 B Pin GPIO_ROT2A, // Rotary switch2 A Pin GPIO_ROT2B, // Rotary switch2 B Pin GPIO_HRE_CLOCK, // Clock/Power line for HR-E Water Meter GPIO_HRE_DATA, // Data line for HR-E Water Meter GPIO_ADE7953_IRQ, // ADE7953 IRQ GPIO_LEDLNK, // Link led GPIO_LEDLNK_INV, // Inverted link led GPIO_ARIRFSEL, // Arilux RF Receive input selected GPIO_BUZZER, // Buzzer GPIO_BUZZER_INV, // Inverted buzzer GPIO_OLED_RESET, // OLED Display Reset GPIO_SOLAXX1_TX, // Solax Inverter tx pin GPIO_SOLAXX1_RX, // Solax Inverter rx pin GPIO_ZIGBEE_TX, // Zigbee Serial interface GPIO_ZIGBEE_RX, // Zigbee Serial interface GPIO_RDM6300_RX, // RDM6300 RX GPIO_IBEACON_TX, // HM17 IBEACON TX GPIO_IBEACON_RX, // HM17 IBEACON RX GPIO_A4988_DIR, // A4988 direction pin GPIO_A4988_STP, // A4988 step pin GPIO_A4988_ENA, // A4988 enabled pin GPIO_A4988_MS1, // A4988 microstep pin1 GPIO_A4988_MS2, // A4988 microstep pin2 GPIO_A4988_MS3, // A4988 microstep pin3 GPIO_DDS2382_TX, // DDS2382 Serial interface GPIO_DDS2382_RX, // DDS2382 Serial interface GPIO_DDSU666_TX, // DDSU666 Serial interface GPIO_DDSU666_RX, // DDSU666 Serial interface GPIO_SENSOR_END }; // Programmer selectable GPIO functionality enum ProgramSelectablePins { GPIO_FIX_START = 251, GPIO_SPI_MISO, // SPI MISO library fixed pin GPIO12 GPIO_SPI_MOSI, // SPI MOSI library fixed pin GPIO13 GPIO_SPI_CLK, // SPI Clk library fixed pin GPIO14 GPIO_USER, // User configurable needs to be 255 GPIO_MAX }; // Text in webpage Module Parameters and commands GPIOS and GPIO const char kSensorNames[] PROGMEM = D_SENSOR_NONE "|" D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|" D_SENSOR_DS18X20 "|" D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|" D_SENSOR_WS2812 "|" D_SENSOR_IRSEND "|" D_SENSOR_SWITCH "1|" D_SENSOR_SWITCH "2|" D_SENSOR_SWITCH "3|" D_SENSOR_SWITCH "4|" D_SENSOR_SWITCH "5|" D_SENSOR_SWITCH "6|" D_SENSOR_SWITCH "7|" D_SENSOR_SWITCH "8|" D_SENSOR_BUTTON "1|" D_SENSOR_BUTTON "2|" D_SENSOR_BUTTON "3|" D_SENSOR_BUTTON "4|" D_SENSOR_RELAY "1|" D_SENSOR_RELAY "2|" D_SENSOR_RELAY "3|" D_SENSOR_RELAY "4|" D_SENSOR_RELAY "5|" D_SENSOR_RELAY "6|" D_SENSOR_RELAY "7|" D_SENSOR_RELAY "8|" D_SENSOR_RELAY "1i|" D_SENSOR_RELAY "2i|" D_SENSOR_RELAY "3i|" D_SENSOR_RELAY "4i|" D_SENSOR_RELAY "5i|" D_SENSOR_RELAY "6i|" D_SENSOR_RELAY "7i|" D_SENSOR_RELAY "8i|" D_SENSOR_PWM "1|" D_SENSOR_PWM "2|" D_SENSOR_PWM "3|" D_SENSOR_PWM "4|" D_SENSOR_PWM "5|" D_SENSOR_COUNTER "1|" D_SENSOR_COUNTER "2|" D_SENSOR_COUNTER "3|" D_SENSOR_COUNTER "4|" D_SENSOR_PWM "1i|" D_SENSOR_PWM "2i|" D_SENSOR_PWM "3i|" D_SENSOR_PWM "4i|" D_SENSOR_PWM "5i|" D_SENSOR_IRRECV "|" D_SENSOR_LED "1|" D_SENSOR_LED "2|" D_SENSOR_LED "3|" D_SENSOR_LED "4|" D_SENSOR_LED "1i|" D_SENSOR_LED "2i|" D_SENSOR_LED "3i|" D_SENSOR_LED "4i|" D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|" D_SENSOR_PZEM0XX_TX "|" D_SENSOR_PZEM004_RX "|" D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|" D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|" D_SENSOR_BACKLIGHT "|" D_SENSOR_PMS5003 "|" D_SENSOR_SDS0X1_RX "|" D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|" D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|" D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|" D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX "|" D_SENSOR_TM1638_CLK "|" D_SENSOR_TM1638_DIO "|" D_SENSOR_TM1638_STB "|" D_SENSOR_SWITCH "1n|" D_SENSOR_SWITCH "2n|" D_SENSOR_SWITCH "3n|" D_SENSOR_SWITCH "4n|" D_SENSOR_SWITCH "5n|" D_SENSOR_SWITCH "6n|" D_SENSOR_SWITCH "7n|" D_SENSOR_SWITCH "8n|" D_SENSOR_BUTTON "1n|" D_SENSOR_BUTTON "2n|" D_SENSOR_BUTTON "3n|" D_SENSOR_BUTTON "4n|" D_SENSOR_COUNTER "1n|" D_SENSOR_COUNTER "2n|" D_SENSOR_COUNTER "3n|" D_SENSOR_COUNTER "4n|" D_SENSOR_PZEM016_RX "|" D_SENSOR_PZEM017_RX "|" D_SENSOR_DFR562 "|" D_SENSOR_SDS0X1_TX "|" D_SENSOR_HX711_SCK "|" D_SENSOR_HX711_DAT "|" D_SENSOR_TX20_TX "|" D_SENSOR_RFSEND "|" D_SENSOR_RFRECV "|" D_SENSOR_TUYA_TX "|" D_SENSOR_TUYA_RX "|" D_SENSOR_MGC3130_XFER "|" D_SENSOR_MGC3130_RESET "|" D_SENSOR_SSPI_MISO "|" D_SENSOR_SSPI_MOSI "|" D_SENSOR_SSPI_SCLK "|" D_SENSOR_SSPI_CS "|" D_SENSOR_SSPI_DC "|" D_SENSOR_RF_SENSOR "|" D_SENSOR_AZ_TX "|" D_SENSOR_AZ_RX "|" D_SENSOR_MAX31855_CS "|" D_SENSOR_MAX31855_CLK "|" D_SENSOR_MAX31855_DO "|" D_SENSOR_BUTTON "1i|" D_SENSOR_BUTTON "2i|" D_SENSOR_BUTTON "3i|" D_SENSOR_BUTTON "4i|" D_SENSOR_BUTTON "1in|" D_SENSOR_BUTTON "2in|" D_SENSOR_BUTTON "3in|" D_SENSOR_BUTTON "4in|" D_SENSOR_NRG_SEL "|" D_SENSOR_NRG_SEL "i|" D_SENSOR_NRG_CF1 "|" D_SENSOR_HLW_CF "|" D_SENSOR_HJL_CF "|" D_SENSOR_MCP39F5_TX "|" D_SENSOR_MCP39F5_RX "|" D_SENSOR_MCP39F5_RST "|" D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX "|" D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_POWER "|" D_SENSOR_MY92X1_DI "|" D_SENSOR_MY92X1_DCKI "|" D_SENSOR_CSE7766_TX "|" D_SENSOR_CSE7766_RX "|" D_SENSOR_ARIRFRCV "|" D_SENSOR_TXD "|" D_SENSOR_RXD "|" D_SENSOR_ROTARY "1a|" D_SENSOR_ROTARY "1b|" D_SENSOR_ROTARY "2a|" D_SENSOR_ROTARY "2b|" D_SENSOR_HRE_CLOCK "|" D_SENSOR_HRE_DATA "|" D_SENSOR_ADE7953_IRQ "|" D_SENSOR_LED_LINK "|" D_SENSOR_LED_LINK "i|" D_SENSOR_ARIRFSEL "|" D_SENSOR_BUZZER "|" D_SENSOR_BUZZER "i|" D_SENSOR_OLED_RESET "|" D_SENSOR_SOLAXX1_TX "|" D_SENSOR_SOLAXX1_RX "|" D_SENSOR_ZIGBEE_TXD "|" D_SENSOR_ZIGBEE_RXD "|" D_SENSOR_RDM6300_RX "|" D_SENSOR_IBEACON_TX "|" D_SENSOR_IBEACON_RX "|" D_SENSOR_A4988_DIR "|" D_SENSOR_A4988_STP "|" D_SENSOR_A4988_ENA "|" D_SENSOR_A4988_MS1 "|" D_SENSOR_A4988_MS2 "|" D_SENSOR_A4988_MS3 "|" D_SENSOR_DDS2382_TX "|" D_SENSOR_DDS2382_RX "|" D_SENSOR_DDSU666_TX "|" D_SENSOR_DDSU666_RX "|" ; // User selectable ADC0 functionality enum UserSelectableAdc0 { ADC0_NONE, // Not used ADC0_INPUT, // Analog input ADC0_TEMP, // Thermistor ADC0_LIGHT, // Light sensor ADC0_BUTTON, // Button ADC0_BUTTON_INV, // ADC0_SWITCH, // Switch // ADC0_SWITCH_INV, ADC0_END }; // Programmer selectable ADC0 functionality enum ProgramSelectableAdc0 { ADC0_FIX_START = 14, ADC0_USER, // User configurable needs to be 15 ADC0_MAX }; // Text in webpage Module Parameters and commands ADC const char kAdc0Names[] PROGMEM = D_SENSOR_NONE "|" D_ANALOG_INPUT "|" D_TEMPERATURE "|" D_LIGHT "|" D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "i|" // D_SENSOR_SWITCH "|" D_SENSOR_SWITCH "i|" ; /********************************************************************************************/ // Supported hardware modules enum SupportedModules { SONOFF_BASIC, SONOFF_RF, SONOFF_SV, SONOFF_TH, SONOFF_DUAL, SONOFF_POW, SONOFF_4CH, SONOFF_S2X, SLAMPHER, SONOFF_TOUCH, SONOFF_LED, CH1, CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, WION, WEMOS, SONOFF_DEV, H801, SONOFF_SC, SONOFF_BN, SONOFF_4CHPRO, HUAFAN_SS, SONOFF_BRIDGE, SONOFF_B1, AILIGHT, SONOFF_T11, SONOFF_T12, SONOFF_T13, SUPLA1, WITTY, YUNSHAN, MAGICHOME, LUANIHVIO, KMC_70011, ARILUX_LC01, ARILUX_LC11, SONOFF_DUAL_R2, ARILUX_LC06, SONOFF_S31, ZENGGE_ZF_WF017, SONOFF_POW_R2, SONOFF_IFAN02, BLITZWOLF_BWSHP, SHELLY1, SHELLY2, PHILIPS, NEO_COOLCAM, ESP_SWITCH, OBI, TECKIN, APLIC_WDP303075, TUYA_DIMMER, GOSUND, ARMTRONIX_DIMMERS, SK03_TUYA, PS_16_DZ, TECKIN_US, MANZOKU_EU_4, OBI2, YTF_IR_BRIDGE, DIGOO, KA10, ZX2820, MI_DESK_LAMP, SP10, WAGA, SYF05, SONOFF_L1, SONOFF_IFAN03, MAXMODULE}; #define USER_MODULE 255 /********************************************************************************************/ #define MAX_GPIO_PIN 17 // Number of supported GPIO #define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11) const char PINS_WEMOS[] PROGMEM = "D3TXD4RXD2D1flashcFLFLolD6D7D5D8D0A0"; typedef struct MYIO { uint8_t io[MAX_GPIO_PIN]; } myio; typedef struct MYCFGIO { uint8_t io[MAX_GPIO_PIN - MIN_FLASH_PINS]; } mycfgio; #define GPIO_FLAG_USED 0 // Currently two flags used #define GPIO_FLAG_SPARE04 16 #define GPIO_FLAG_SPARE05 32 #define GPIO_FLAG_SPARE06 64 #define GPIO_FLAG_SPARE07 128 typedef union { uint8_t data; struct { uint8_t adc0 : 4; // Allow ADC0 when define USE_ADC_VCC is disabled uint8_t spare04 : 1; uint8_t spare05 : 1; uint8_t spare06 : 1; uint8_t spare07 : 1; }; } gpio_flag; typedef struct MYTMPLT { char name[15]; mycfgio gp; gpio_flag flag; } mytmplt; const uint8_t kGpioNiceList[] PROGMEM = { GPIO_NONE, // Not used GPIO_KEY1, // Buttons GPIO_KEY1_NP, GPIO_KEY1_INV, GPIO_KEY1_INV_NP, GPIO_KEY2, GPIO_KEY2_NP, GPIO_KEY2_INV, GPIO_KEY2_INV_NP, GPIO_KEY3, GPIO_KEY3_NP, GPIO_KEY3_INV, GPIO_KEY3_INV_NP, GPIO_KEY4, GPIO_KEY4_NP, GPIO_KEY4_INV, GPIO_KEY4_INV_NP, GPIO_SWT1, // User connected external switches GPIO_SWT1_NP, GPIO_SWT2, GPIO_SWT2_NP, GPIO_SWT3, GPIO_SWT3_NP, GPIO_SWT4, GPIO_SWT4_NP, GPIO_SWT5, GPIO_SWT5_NP, GPIO_SWT6, GPIO_SWT6_NP, GPIO_SWT7, GPIO_SWT7_NP, GPIO_SWT8, GPIO_SWT8_NP, GPIO_REL1, // Relays GPIO_REL1_INV, GPIO_REL2, GPIO_REL2_INV, GPIO_REL3, GPIO_REL3_INV, GPIO_REL4, GPIO_REL4_INV, GPIO_REL5, GPIO_REL5_INV, GPIO_REL6, GPIO_REL6_INV, GPIO_REL7, GPIO_REL7_INV, GPIO_REL8, GPIO_REL8_INV, GPIO_LED1, // Leds GPIO_LED1_INV, GPIO_LED2, GPIO_LED2_INV, GPIO_LED3, GPIO_LED3_INV, GPIO_LED4, GPIO_LED4_INV, GPIO_LEDLNK, // Link led GPIO_LEDLNK_INV, // Inverted link led GPIO_PWM1, // RGB Red or C Cold White GPIO_PWM1_INV, GPIO_PWM2, // RGB Green or CW Warm White GPIO_PWM2_INV, GPIO_PWM3, // RGB Blue GPIO_PWM3_INV, GPIO_PWM4, // RGBW (Cold) White GPIO_PWM4_INV, GPIO_PWM5, // RGBCW Warm White GPIO_PWM5_INV, #ifdef USE_COUNTER GPIO_CNTR1, // Counters GPIO_CNTR1_NP, GPIO_CNTR2, GPIO_CNTR2_NP, GPIO_CNTR3, GPIO_CNTR3_NP, GPIO_CNTR4, GPIO_CNTR4_NP, #endif #ifdef USE_BUZZER GPIO_BUZZER, // Buzzer GPIO_BUZZER_INV, // Inverted buzzer #endif GPIO_TXD, // Serial interface GPIO_RXD, // Serial interface #ifdef USE_I2C GPIO_I2C_SCL, // I2C SCL GPIO_I2C_SDA, // I2C SDA #endif #ifdef USE_SPI GPIO_SPI_CS, // SPI Chip Select GPIO_SPI_DC, // SPI Data Direction GPIO_SSPI_MISO, // Software SPI Master Input Slave Output GPIO_SSPI_MOSI, // Software SPI Master Output Slave Input GPIO_SSPI_SCLK, // Software SPI Serial Clock GPIO_SSPI_CS, // Software SPI Chip Select GPIO_SSPI_DC, // Software SPI Data or Command #endif #ifdef USE_DISPLAY GPIO_BACKLIGHT, // Display backlight control GPIO_OLED_RESET, // OLED Display Reset #endif #ifdef USE_DHT GPIO_DHT11, // DHT11 GPIO_DHT22, // DHT21, DHT22, AM2301, AM2302, AM2321 GPIO_SI7021, // iTead SI7021 #endif #if defined(USE_DS18B20) || defined(USE_DS18x20) GPIO_DSB, // Single wire DS18B20 or DS18S20 #endif // Light #ifdef USE_LIGHT #ifdef USE_WS2812 GPIO_WS2812, // WS2812 Led string #endif #ifdef USE_ARILUX_RF GPIO_ARIRFRCV, // AriLux RF Receive input GPIO_ARIRFSEL, // Arilux RF Receive input selected #endif GPIO_DI, // my92x1 PWM input GPIO_DCKI, // my92x1 CLK input #ifdef USE_SM16716 GPIO_SM16716_CLK, // SM16716 CLOCK GPIO_SM16716_DAT, // SM16716 DATA GPIO_SM16716_SEL, // SM16716 SELECT #endif // USE_SM16716 #ifdef USE_TUYA_MCU GPIO_TUYA_TX, // Tuya Serial interface GPIO_TUYA_RX, // Tuya Serial interface #endif #endif // USE_LIGHT #if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL) GPIO_IRSEND, // IR remote #if defined(USE_IR_RECEIVE) || defined(USE_IR_REMOTE_FULL) GPIO_IRRECV, // IR receiver #endif #endif #ifdef USE_RC_SWITCH GPIO_RFSEND, // RF transmitter GPIO_RFRECV, // RF receiver #endif #ifdef USE_RF_SENSOR GPIO_RF_SENSOR, // Rf receiver with sensor decoding #endif #ifdef USE_SR04 GPIO_SR04_TRIG, // SR04 Trigger pin GPIO_SR04_ECHO, // SR04 Echo pin #endif #ifdef USE_TM1638 GPIO_TM16CLK, // TM1638 Clock GPIO_TM16DIO, // TM1638 Data I/O GPIO_TM16STB, // TM1638 Strobe #endif #ifdef USE_HX711 GPIO_HX711_SCK, // HX711 Load Cell clock GPIO_HX711_DAT, // HX711 Load Cell data #endif // Energy sensors #ifdef USE_ENERGY_SENSOR #ifdef USE_HLW8012 GPIO_NRG_SEL, // HLW8012/HLJ-01 Sel output (1 = Voltage) GPIO_NRG_SEL_INV, // HLW8012/HLJ-01 Sel output (0 = Voltage) GPIO_NRG_CF1, // HLW8012/HLJ-01 CF1 voltage / current GPIO_HLW_CF, // HLW8012 CF power GPIO_HJL_CF, // HJL-01/BL0937 CF power #endif #if defined(USE_I2C) && defined(USE_ADE7953) GPIO_ADE7953_IRQ, // ADE7953 IRQ #endif GPIO_CSE7766_TX, // CSE7766 Serial interface (S31 and Pow R2) GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2) #ifdef USE_MCP39F501 GPIO_MCP39F5_TX, // MCP39F501 Serial interface (Shelly2) GPIO_MCP39F5_RX, // MCP39F501 Serial interface (Shelly2) GPIO_MCP39F5_RST, // MCP39F501 Reset (Shelly2) #endif #if defined(USE_PZEM004T) || defined(USE_PZEM_AC) || defined(USE_PZEM_DC) GPIO_PZEM0XX_TX, // PZEM0XX Serial interface #endif #ifdef USE_PZEM004T GPIO_PZEM004_RX, // PZEM004T Serial interface #endif #ifdef USE_PZEM_AC GPIO_PZEM016_RX, // PZEM-014,016 Serial Modbus interface #endif #ifdef USE_PZEM_DC GPIO_PZEM017_RX, // PZEM-003,017 Serial Modbus interface #endif #ifdef USE_SDM120_2 GPIO_SDM120_TX, // SDM120 Serial interface GPIO_SDM120_RX, // SDM120 Serial interface #endif #ifdef USE_SDM630_2 GPIO_SDM630_TX, // SDM630 Serial interface GPIO_SDM630_RX, // SDM630 Serial interface #endif #ifdef USE_DDS2382 GPIO_DDS2382_TX, // DDS2382 Serial interface GPIO_DDS2382_RX, // DDS2382 Serial interface #endif #endif // USE_ENERGY_SENSOR #ifndef USE_SDM120_2 #ifdef USE_SDM120 GPIO_SDM120_TX, // SDM120 Serial interface GPIO_SDM120_RX, // SDM120 Serial interface #endif #endif // USE_SDM120_2 #ifndef USE_SDM630_2 #ifdef USE_SDM630 GPIO_SDM630_TX, // SDM630 Serial interface GPIO_SDM630_RX, // SDM630 Serial interface #endif #endif // USE_SDM630_2 #ifdef USE_SOLAX_X1 GPIO_SOLAXX1_TX, // Solax Inverter tx pin GPIO_SOLAXX1_RX, // Solax Inverter rx pin #endif #ifdef USE_DDSU666 GPIO_DDSU666_TX, // DDSU666 Serial interface GPIO_DDSU666_RX, // DDSU666 Serial interface #endif // USE_DDSU666 #ifdef USE_SERIAL_BRIDGE GPIO_SBR_TX, // Serial Bridge Serial interface GPIO_SBR_RX, // Serial Bridge Serial interface #endif #ifdef USE_ZIGBEE GPIO_ZIGBEE_TX, // Zigbee Serial interface GPIO_ZIGBEE_RX, // Zigbee Serial interface #endif #ifdef USE_MHZ19 GPIO_MHZ_TXD, // MH-Z19 Serial interface GPIO_MHZ_RXD, // MH-Z19 Serial interface #endif #ifdef USE_SENSEAIR GPIO_SAIR_TX, // SenseAir Serial interface GPIO_SAIR_RX, // SenseAir Serial interface #endif #ifdef USE_NOVA_SDS GPIO_SDS0X1_TX, // Nova Fitness SDS011 Serial interface GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface #endif #ifdef USE_PMS5003 GPIO_PMS5003, // Plantower PMS5003 Serial interface #endif #ifdef USE_TX20_WIND_SENSOR GPIO_TX20_TXD_BLACK, // TX20 Transmission Pin #endif #ifdef USE_MP3_PLAYER GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player Serial interface #endif #ifdef USE_AZ7798 GPIO_AZ_TXD, // AZ-Instrument 7798 CO2 datalogger Serial interface GPIO_AZ_RXD, // AZ-Instrument 7798 CO2 datalogger Serial interface #endif #ifdef USE_PN532_HSU GPIO_PN532_TXD, // PN532 HSU Tx GPIO_PN532_RXD, // PN532 HSU Rx #endif #ifdef USE_RDM6300 GPIO_RDM6300_RX, #endif #ifdef USE_IBEACON GPIO_IBEACON_RX, GPIO_IBEACON_TX, #endif #ifdef USE_MGC3130 GPIO_MGC3130_XFER, GPIO_MGC3130_RESET, #endif #ifdef USE_MAX31855 GPIO_MAX31855CS, // MAX31855 Serial interface GPIO_MAX31855CLK, // MAX31855 Serial interface GPIO_MAX31855DO, // MAX31855 Serial interface #endif #ifdef ROTARY_V1 GPIO_ROT1A, // Rotary switch1 A Pin GPIO_ROT1B, // Rotary switch1 B Pin GPIO_ROT2A, // Rotary switch2 A Pin GPIO_ROT2B, // Rotary switch2 B Pin #endif #ifdef USE_HRE GPIO_HRE_CLOCK, GPIO_HRE_DATA, #endif #ifdef USE_A4988_Stepper GPIO_A4988_DIR, // A4988 direction pin GPIO_A4988_STP, // A4988 step pin // folowing are not mandatory GPIO_A4988_ENA, // A4988 enabled pin GPIO_A4988_MS1, // A4988 microstep pin1 GPIO_A4988_MS2, // A4988 microstep pin2 GPIO_A4988_MS3, // A4988 microstep pin3 #endif }; const uint8_t kModuleNiceList[] PROGMEM = { SONOFF_BASIC, // Sonoff Relay Devices SONOFF_RF, SONOFF_TH, SONOFF_DUAL, SONOFF_DUAL_R2, SONOFF_POW, SONOFF_POW_R2, SONOFF_4CH, SONOFF_4CHPRO, SONOFF_S31, // Sonoff Socket Relay Devices with Energy Monitoring SONOFF_S2X, // Sonoff Socket Relay Devices SONOFF_TOUCH, // Sonoff Switch Devices SONOFF_T11, SONOFF_T12, SONOFF_T13, SONOFF_LED, // Sonoff Light Devices SONOFF_BN, #ifdef USE_PS_16_DZ SONOFF_L1, #endif SONOFF_B1, // Sonoff Light Bulbs SLAMPHER, SONOFF_SC, // Sonoff Environmemtal Sensor #ifdef USE_SONOFF_IFAN SONOFF_IFAN02, // Sonoff Fan SONOFF_IFAN03, #endif SONOFF_BRIDGE, // Sonoff Bridge SONOFF_SV, // Sonoff Development Devices SONOFF_DEV, CH1, // Relay Devices CH4, MOTOR, ELECTRODRAGON, EXS_RELAY, SUPLA1, LUANIHVIO, YUNSHAN, WION, SHELLY1, SHELLY2, BLITZWOLF_BWSHP, // Socket Relay Devices with Energy Monitoring TECKIN, TECKIN_US, APLIC_WDP303075, GOSUND, ZX2820, SK03_TUYA, DIGOO, KA10, SP10, WAGA, NEO_COOLCAM, // Socket Relay Devices OBI, OBI2, MANZOKU_EU_4, ESP_SWITCH, // Switch Devices #ifdef USE_TUYA_MCU TUYA_DIMMER, // Dimmer Devices #endif #ifdef USE_ARMTRONIX_DIMMERS ARMTRONIX_DIMMERS, #endif #ifdef USE_PS_16_DZ PS_16_DZ, #endif H801, // Light Devices MAGICHOME, ARILUX_LC01, ARILUX_LC06, ARILUX_LC11, ZENGGE_ZF_WF017, HUAFAN_SS, #ifdef ROTARY_V1 MI_DESK_LAMP, #endif KMC_70011, AILIGHT, // Light Bulbs PHILIPS, SYF05, YTF_IR_BRIDGE, WITTY, // Development Devices WEMOS }; // Default module settings const mytmplt kModules[MAXMODULE] PROGMEM = { { "Sonoff Basic", // SONOFF_BASIC - Sonoff Basic (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Only available on newer Sonoff Basic R2 V1 GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor 0, // GPIO05 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status GPIO_USER, // GPIO14 Optional sensor 0, // GPIO15 0, // GPIO16 0 // ADC0 Analog input }, { "Sonoff RF", // SONOFF_RF - Sonoff RF (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional sensor GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status GPIO_USER, // GPIO14 Optional sensor 0, 0, 0 }, { "Sonoff SV", // SONOFF_SV - Sonoff SV (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor GPIO_USER, // GPIO05 Optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status GPIO_USER, // GPIO14 Optional sensor 0, 0, ADC0_USER // ADC0 Analog input }, { "Sonoff TH", // SONOFF_TH - Sonoff TH10/16 (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status GPIO_USER, // GPIO14 Optional sensor 0, 0, 0 }, { "Sonoff Dual", // SONOFF_DUAL - Sonoff Dual (ESP8266) 0, GPIO_TXD, // GPIO01 Relay control 0, GPIO_RXD, // GPIO03 Relay control GPIO_USER, // GPIO04 Optional sensor 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status GPIO_USER, // GPIO14 Optional sensor 0, 0, 0 }, { "Sonoff Pow", // SONOFF_POW - Sonoff Pow (ESP8266 - HLW8012) GPIO_KEY1, // GPIO00 Button 0, 0, 0, 0, GPIO_NRG_SEL, // GPIO05 HLW8012 Sel output (1 = Voltage) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_NRG_CF1, // GPIO13 HLW8012 CF1 voltage / current GPIO_HLW_CF, // GPIO14 HLW8012 CF power GPIO_LED1, // GPIO15 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0 }, { "Sonoff 4CH", // SONOFF_4CH - Sonoff 4CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional sensor GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On) GPIO_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPIO_KEY2, // GPIO09 Button 2 GPIO_KEY3, // GPIO10 Button 3 // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On) - Link and Power status GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) GPIO_KEY4, // GPIO14 Button 4 GPIO_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On) 0, 0 }, { "Sonoff S2X", // SONOFF_S2X - Sonoff S20, S22 and S26 Smart Socket (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional sensor GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) - Link and Power status GPIO_LED1_INV, // GPIO13 Green/Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Slampher", // SLAMPHER - Slampher (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Sonoff Touch", // SONOFF_TOUCH - Sonoff Touch (ESP8285) GPIO_KEY1, // GPIO00 Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 0, // GPIO10 // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) - Link and Power status GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) 0, 0, 0, 0 }, { "Sonoff LED", // SONOFF_LED - Sonoff LED (ESP8266) GPIO_KEY1, // GPIO00 Button 0, 0, 0, GPIO_USER, // GPIO04 Optional sensor (PWM3 Green) GPIO_USER, // GPIO05 Optional sensor (PWM2 Red) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM1, // GPIO12 Cold light (PWM0 Cold) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status GPIO_PWM2, // GPIO14 Warm light (PWM1 Warm) GPIO_USER, // GPIO15 Optional sensor (PWM4 Blue) 0, 0 }, { "1 Channel", // CH1 - 1 Channel Inching/Latching Relay using (PSA-B01 - ESP8266 and PSF-B01 - ESP8285) GPIO_KEY1, // GPIO00 Button 0, 0, 0, 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "4 Channel", // CH4 - 4 Channel Inching/Latching Relays (ESP8266) 0, GPIO_TXD, // GPIO01 Relay control 0, GPIO_RXD, // GPIO03 Relay control 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Motor C/AC", // MOTOR - Motor Clockwise / Anti clockwise (PSA-B01 - ESP8266) GPIO_KEY1, // GPIO00 Button 0, 0, 0, 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "ElectroDragon", // ELECTRODRAGON - ElectroDragon IoT Relay Board (ESP8266) GPIO_KEY2, // GPIO00 Button 2 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_KEY1, // GPIO02 Button 1 GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor GPIO_USER, // GPIO05 Optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL2, // GPIO12 Red Led and Relay 2 (0 = Off, 1 = On) GPIO_REL1, // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On) GPIO_USER, // GPIO14 Optional sensor GPIO_USER, // GPIO15 Optional sensor GPIO_LED1, // GPIO16 Green/Blue Led (1 = On, 0 = Off) - Link and Power status ADC0_USER // ADC0 A0 Analog input }, { "EXS Relay(s)", // EXS_RELAY - ES-Store Latching relay(s) (ESP8266) // https://ex-store.de/ESP8266-WiFi-Relay-V31 // V3.1 Module Pin 1 VCC 3V3, Module Pin 6 GND // https://ex-store.de/2-Kanal-WiFi-WLan-Relay-V5-Blackline-fuer-Unterputzmontage GPIO_USER, // GPIO00 V3.1 Module Pin 8 - V5.0 Module Pin 4 GPIO_USER, // GPIO01 UART0_TXD V3.1 Module Pin 2 - V5.0 Module Pin 3 GPIO_USER, // GPIO02 V3.1 Module Pin 7 GPIO_USER, // GPIO03 UART0_RXD V3.1 Module Pin 3 GPIO_USER, // GPIO04 V3.1 Module Pin 10 - V5.0 Module Pin 2 GPIO_USER, // GPIO05 V3.1 Module Pin 9 - V5.0 Module Pin 1 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Relay1 ( 1 = Off) GPIO_REL2, // GPIO13 Relay1 ( 1 = On) GPIO_USER, // GPIO14 V3.1 Module Pin 5 - V5.0 GPIO_REL3_INV Relay2 ( 1 = Off) GPIO_LED1, // GPIO15 V5.0 LED1 - Link and Power status GPIO_USER, // GPIO16 V3.1 Module Pin 4 - V5.0 GPIO_REL4_INV Relay2 ( 1 = On) 0 }, { "WiOn", // WION - Indoor Tap (ESP8266) // https://www.amazon.com/gp/product/B00ZYLUBJU/ref=s9_acsd_al_bw_c_x_3_w GPIO_USER, // GPIO00 Optional sensor (pm clock) 0, GPIO_LED1, // GPIO02 Green Led (1 = On, 0 = Off) - Link and Power status 0, 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_USER, // GPIO12 Optional sensor (pm data) GPIO_KEY1, // GPIO13 Button 0, GPIO_REL1, // GPIO15 Relay (0 = Off, 1 = On) 0, 0 }, { "Generic", // WEMOS - Any ESP8266/ESP8285 device like WeMos and NodeMCU hardware (ESP8266) GPIO_USER, // GPIO00 D3 Wemos Button Shield GPIO_USER, // GPIO01 TX Serial RXD GPIO_USER, // GPIO02 D4 Wemos DHT Shield GPIO_USER, // GPIO03 RX Serial TXD and Optional sensor GPIO_USER, // GPIO04 D2 Wemos I2C SDA GPIO_USER, // GPIO05 D1 Wemos I2C SCL / Wemos Relay Shield (0 = Off, 1 = On) / Wemos WS2812B RGB led Shield // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPIO_USER, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) GPIO_USER, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_USER, // GPIO12 D6 GPIO_USER, // GPIO13 D7 GPIO_USER, // GPIO14 D5 GPIO_USER, // GPIO15 D8 GPIO_USER, // GPIO16 D0 Wemos Wake ADC0_USER // ADC0 A0 Analog input }, { "Sonoff Dev", // SONOFF_DEV - Sonoff Dev (ESP8266) GPIO_KEY1, // GPIO00 E-FW Button GPIO_USER, // GPIO01 TX Serial RXD and Optional sensor 0, // GPIO02 GPIO_USER, // GPIO03 RX Serial TXD and Optional sensor GPIO_USER, // GPIO04 Optional sensor GPIO_USER, // GPIO05 Optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_USER, // GPIO12 GPIO_USER, // GPIO13 BLUE LED GPIO_USER, // GPIO14 Optional sensor 0, // GPIO15 0, // GPIO16 ADC0_USER // ADC0 A0 Analog input }, { "H801", // H801 - Lixada H801 Wifi (ESP8266) GPIO_USER, // GPIO00 E-FW Button GPIO_LED1, // GPIO01 Green LED - Link and Power status GPIO_USER, // GPIO02 TX and Optional sensor - Pin next to TX on the PCB GPIO_USER, // GPIO03 RX and Optional sensor - Pin next to GND on the PCB GPIO_PWM5, // GPIO04 W2 - PWM5 GPIO_LED2_INV, // GPIO05 Red LED // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM3, // GPIO12 Blue GPIO_PWM2, // GPIO13 Green GPIO_PWM4, // GPIO14 W1 - PWM4 GPIO_PWM1, // GPIO15 Red 0, 0 }, { "Sonoff SC", // SONOFF_SC - onoff SC (ESP8266) GPIO_KEY1, // GPIO00 Button GPIO_TXD, // GPIO01 RXD to ATMEGA328P GPIO_USER, // GPIO02 Optional sensor GPIO_RXD, // GPIO03 TXD to ATMEGA328P 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Sonoff BN-SZ", // SONOFF_BN - Sonoff BN-SZ01 Ceiling led (ESP8285) 0, 0, 0, 0, 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 0, // GPIO10 // GPIO11 (SD_CMD Flash) GPIO_PWM1, // GPIO12 Light GPIO_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Sonoff 4CH Pro", // SONOFF_4CHPRO - Sonoff 4CH Pro (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional sensor GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On) GPIO_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPIO_KEY2, // GPIO09 Button 2 GPIO_KEY3, // GPIO10 Button 3 // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status GPIO_KEY4, // GPIO14 Button 4 GPIO_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On) 0, 0 }, { "Huafan SS", // HUAFAN_SS - Hua Fan Smart Socket (ESP8266) - like Sonoff Pow GPIO_LEDLNK_INV, // GPIO00 Blue Led (0 = On, 1 = Off) - Link status 0, 0, GPIO_LED1_INV, // GPIO03 Red Led (0 = On, 1 = Off) - Power status GPIO_KEY1, // GPIO04 Button GPIO_REL1_INV, // GPIO05 Relay (0 = On, 1 = Off) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_CF1, // GPIO12 HLW8012 CF1 voltage / current GPIO_NRG_SEL, // GPIO13 HLW8012 Sel output (1 = Voltage) GPIO_HLW_CF, // GPIO14 HLW8012 CF power 0, 0, 0 }, { "Sonoff Bridge", // SONOFF_BRIDGE - Sonoff RF Bridge 433 (ESP8285) GPIO_KEY1, // GPIO00 Button GPIO_TXD, // GPIO01 RF bridge control GPIO_USER, // GPIO02 Optional sensor GPIO_RXD, // GPIO03 RF bridge control GPIO_USER, // GPIO04 Optional sensor GPIO_USER, // GPIO05 Optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 0, // GPIO10 // GPIO11 (SD_CMD Flash) GPIO_USER, // GPIO12 Optional sensor GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status GPIO_USER, // GPIO14 Optional sensor 0, 0, 0 }, { "Sonoff B1", // SONOFF_B1 - Sonoff B1 (ESP8285 - my9231) GPIO_KEY1, // GPIO00 Pad GPIO_USER, // GPIO01 Serial RXD and Optional sensor pad GPIO_USER, // GPIO02 Optional sensor SDA pad GPIO_USER, // GPIO03 Serial TXD and Optional sensor pad 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 0, // GPIO10 // GPIO11 (SD_CMD Flash) GPIO_DI, // GPIO12 my9231 DI 0, GPIO_DCKI, // GPIO14 my9231 DCKI 0, 0, 0 }, { "AiLight", // AILIGHT - Ai-Thinker RGBW led (ESP8266 - my9291) GPIO_KEY1, // GPIO00 Pad GPIO_USER, // GPIO01 Serial RXD and Optional sensor pad GPIO_USER, // GPIO02 Optional sensor SDA pad GPIO_USER, // GPIO03 Serial TXD and Optional sensor pad 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, GPIO_DI, // GPIO13 my9291 DI 0, GPIO_DCKI, // GPIO15 my9291 DCKI 0, 0 }, { "Sonoff T1 1CH", // SONOFF_T11 - Sonoff T1 1CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional Sensor (J3 Pin 5) GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 0, // GPIO10 // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Sonoff T1 2CH", // SONOFF_T12 - Sonoff T1 2CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional Sensor (J3 Pin 5) GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, GPIO_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPIO_KEY2, // GPIO09 Button 2 0, // GPIO10 // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Sonoff T1 3CH", // SONOFF_T13 - Sonoff T1 3CH (ESP8285) GPIO_KEY1, // GPIO00 Button 1 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional Sensor (J3 Pin 5) GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_REL3, // GPIO04 Blue Led and Relay 3 (0 = Off, 1 = On) GPIO_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPIO_KEY2, // GPIO09 Button 2 GPIO_KEY3, // GPIO10 Button 3 // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Supla Espablo", // SUPLA1 - Supla Espablo (ESP8266) // http://www.wykop.pl/ramka/3325399/diy-supla-do-puszki-instalacyjnej-podtynkowej-supla-org/ 0, // GPIO00 Flash jumper GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_DSB, // GPIO02 DS18B20 sensor GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_KEY1, // GPIO04 Button 1 GPIO_REL1, // GPIO05 Relay 1 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_USER, // GPIO12 Optional sensor GPIO_REL2, // GPIO13 Relay 2 (0 = Off, 1 = On) GPIO_USER, // GPIO14 Optional sensor 0, GPIO_LED1, // GPIO16 Led (1 = On, 0 = Off) - Link and Power status ADC0_USER // ADC0 A0 Analog input }, { "Witty Cloud", // WITTY - Witty Cloud Dev Board (ESP8266) // https://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32643464555.html GPIO_USER, // GPIO00 D3 flash push button on interface board GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_LED1_INV, // GPIO02 D4 Blue Led (0 = On, 1 = Off) on ESP-12F - Link and Power status GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_KEY1, // GPIO04 D2 push button on ESP-12F board GPIO_USER, // GPIO05 D1 optional sensor // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM2, // GPIO12 D6 RGB LED Green GPIO_PWM3, // GPIO13 D7 RGB LED Blue GPIO_USER, // GPIO14 D5 optional sensor GPIO_PWM1, // GPIO15 D8 RGB LED Red GPIO_USER, // GPIO16 D0 optional sensor ADC0_USER // ADC0 A0 Light sensor / Requires USE_ADC_VCC in user_config.h to be disabled }, { "Yunshan Relay", // YUNSHAN - Yunshan Wifi Relay (ESP8266) // https://www.ebay.com/p/Esp8266-220v-10a-Network-Relay-WiFi-Module/1369583381 // Schematics and Info https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/ 0, // GPIO00 Flash jumper - Module Pin 8 GPIO_USER, // GPIO01 Serial RXD and Optional sensor - Module Pin 2 GPIO_LED1_INV, // GPIO02 Blue Led (0 = On, 1 = Off) on ESP-12F - Module Pin 7 - Link and Power status GPIO_USER, // GPIO03 Serial TXD and Optional sensor - Module Pin 3 GPIO_REL1, // GPIO04 Red Led and Relay (0 = Off, 1 = On) - Module Pin 10 GPIO_KEY1, // GPIO05 Blue Led and OptoCoupler input - Module Pin 9 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, 0, 0, 0, 0, 0 }, { "MagicHome", // MAGICHOME - Magic Home (aka Flux-light) (ESP8266) and Arilux LC10 (ESP8285) // https://www.aliexpress.com/item/Magic-Home-Mini-RGB-RGBW-Wifi-Controller-For-Led-Strip-Panel-light-Timing-Function-16million-colors/32686853650.html 0, GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_LED1_INV, // GPIO02 Blue onboard LED - Link and Power status GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_ARIRFRCV, // GPIO04 IR or RF receiver (optional) (Arilux LC10) GPIO_PWM2, // GPIO05 RGB LED Green // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM3, // GPIO12 RGB LED Blue GPIO_USER, // GPIO13 RGBW LED White (optional - set to PWM4 for Cold White or Warm White as used on Arilux LC10) GPIO_PWM1, // GPIO14 RGB LED Red GPIO_ARIRFSEL, // GPIO15 RF receiver control (Arilux LC10) 0, 0 }, { "Luani HVIO", // LUANIHVIO - ESP8266_HVIO // https://luani.de/projekte/esp8266-hvio/ 0, // GPIO00 Flash jumper GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Optional sensor / I2C SDA pad GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_REL1, // GPIO04 Relay 1 (0 = Off, 1 = On) GPIO_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_SWT1, // GPIO12 External input 1 (0 = On, 1 = Off) GPIO_SWT2, // GPIO13 External input 2 (0 = On, 1 = Off) GPIO_USER, // GPIO14 Optional sensor / I2C SCL pad GPIO_LED1, // GPIO15 Led (1 = On, 0 = Off) - Link and Power status 0, ADC0_USER // ADC0 A0 Analog input }, { "KMC 70011", // KMC_70011 - KMC 70011 // https://www.amazon.com/KMC-Timing-Monitoring-Network-125V-240V/dp/B06XRX2GTQ GPIO_KEY1, // GPIO00 Button 0, 0, 0, GPIO_HLW_CF, // GPIO04 HLW8012 CF power GPIO_NRG_CF1, // GPIO05 HLW8012 CF1 voltage / current // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL, // GPIO12 HLW8012 SEL (1 = Voltage) GPIO_LED1_INV, // GPIO13 Green Led - Link and Power status GPIO_REL1, // GPIO14 Relay 0, 0, 0 }, { "Arilux LC01", // ARILUX_LC01 - Arilux AL-LC01 (ESP8285) // https://www.banggood.com/nl/ARILUX-AL-LC01-Super-Mini-LED-WIFI-Smart-RGB-Controller-For-RGB-LED-Strip-Light-DC-9-12V-p-1058603.html // (PwmFrequency 1111Hz) GPIO_KEY1, // GPIO00 Optional Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_ARIRFSEL, // GPIO02 RF receiver control GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_ARIRFRCV, // GPIO04 IR or RF receiver (optional) GPIO_PWM1, // GPIO05 RGB LED Red // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM2, // GPIO12 RGB LED Green GPIO_PWM3, // GPIO13 RGB LED Blue GPIO_USER, // GPIO14 RGBW LED White (optional - set to PWM4 for Cold White or Warm White) 0, 0, 0 }, { "Arilux LC11", // ARILUX_LC11 - Arilux AL-LC11 (ESP8266) // https://www.banggood.com/nl/ARILUX-AL-LC11-Super-Mini-LED-WIFI-APP-Controller-RF-Remote-Control-For-RGBWW-LED-Strip-DC9-28V-p-1085112.html // (PwmFrequency 540Hz) GPIO_KEY1, // GPIO00 Optional Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_ARIRFSEL, // GPIO02 RF receiver control GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_PWM2, // GPIO04 RGB LED Green GPIO_PWM1, // GPIO05 RGB LED Red // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM5, // GPIO12 RGBCW LED Warm GPIO_PWM4, // GPIO13 RGBW LED Cold GPIO_PWM3, // GPIO14 RGB LED Blue GPIO_ARIRFRCV, // GPIO15 RF receiver input 0, 0 }, { "Sonoff Dual R2", // SONOFF_DUAL_R2 - Sonoff Dual R2 (ESP8285) GPIO_USER, // GPIO00 Button 0 on header (0 = On, 1 = Off) GPIO_USER, // GPIO01 Serial RXD and Optional sensor 0, GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, GPIO_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPIO_USER, // GPIO09 Button 1 on header (0 = On, 1 = Off) GPIO_KEY1, // GPIO10 Button on casing // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Relay 1 (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Arilux LC06", // ARILUX_LC06 - Arilux AL-LC06 (ESP8285) // https://www.banggood.com/ARILUX-AL-LC06-LED-WIFI-Smartphone-Controller-Romote-5-Channels-DC12-24V-For-RGBWW-Strip-light-p-1061476.html GPIO_KEY1, // GPIO00 Optional Button GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_USER, // GPIO02 Empty pad GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_USER, // GPIO04 W2 - PWM5 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM2, // GPIO12 RGB LED Green GPIO_PWM3, // GPIO13 RGB LED Blue GPIO_PWM1, // GPIO14 RGB LED Red GPIO_USER, // GPIO15 RGBW LED White 0, 0 }, { "Sonoff S31", // SONOFF_S31 - Sonoff S31 (ESP8266 - CSE7766) GPIO_KEY1, // GPIO00 Button GPIO_CSE7766_TX, // GPIO01 Serial RXD 4800 baud 8E1 CSE7766 energy sensor 0, GPIO_CSE7766_RX, // GPIO03 Serial TXD 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Zengge WF017", // ZENGGE_ZF_WF017 - Zenggee ZJ-WF017-A (ESP12S)) // https://www.ebay.com/p/Smartphone-Android-IOS-WiFi-Music-Controller-for-RGB-5050-3528-LED-Strip-Light/534446632?_trksid=p2047675.l2644 GPIO_KEY1, // GPIO00 Optional Button 0, GPIO_USER, // GPIO02 Empty pad 0, GPIO_USER, // GPIO04 W2 - PWM5 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM2, // GPIO12 RGB LED Green GPIO_PWM1, // GPIO13 RGB LED Red GPIO_PWM3, // GPIO14 RGB LED Blue 0, 0, 0 }, { "Sonoff Pow R2", // SONOFF_POW_R2 - Sonoff Pow R2 (ESP8285 - CSE7766) GPIO_KEY1, // GPIO00 Button GPIO_CSE7766_TX, // GPIO01 Serial RXD 4800 baud 8E1 CSE7766 energy sensor 0, GPIO_CSE7766_RX, // GPIO03 Serial TXD 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link and Power status 0, 0, 0, 0 }, { "Sonoff iFan02", // SONOFF_IFAN02 - Sonoff iFan02 (ESP8285) GPIO_KEY1, // GPIO00 WIFI_KEY0 Virtual button 1 as feedback from RC GPIO_USER, // GPIO01 ESP_TXD Serial RXD and Optional sensor 0, // GPIO02 ESP_LOG GPIO_USER, // GPIO03 ESP_RXD Serial TXD and Optional sensor GPIO_REL3, // GPIO04 WIFI_O2 Relay 3 (0 = Off, 1 = On) controlling the fan GPIO_REL2, // GPIO05 WIFI_O1 Relay 2 (0 = Off, 1 = On) controlling the fan // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPIO_KEY2, // GPIO09 WIFI_KEY1 Virtual button 2 as feedback from RC GPIO_KEY3, // GPIO10 WIFI_KEY2 Virtual button 3 as feedback from RC // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 WIFI_O0 Relay 1 (0 = Off, 1 = On) controlling the light GPIO_LED1_INV, // GPIO13 WIFI_CHK Blue Led on PCA (0 = On, 1 = Off) - Link and Power status GPIO_KEY4, // GPIO14 WIFI_KEY3 Virtual button 4 as feedback from RC GPIO_REL4, // GPIO15 WIFI_O3 Relay 4 (0 = Off, 1 = On) controlling the fan 0, 0 }, { "BlitzWolf SHP", // BLITZWOLF_BWSHP - BlitzWolf BW-SHP2 and BW-SHP6 (ESP8285 - BL0937 or HJL-01 Energy Monitoring) // https://www.banggood.com/BlitzWolf-BW-SHP2-Smart-WIFI-Socket-EU-Plug-220V-16A-Work-with-Amazon-Alexa-Google-Assistant-p-1292899.html // https://www.amazon.de/Steckdose-Homecube-intelligente-Verbrauchsanzeige-funktioniert/dp/B076Q2LKHG/ref=sr_1_fkmr0_1 // https://www.amazon.de/Intelligente-Stromverbrauch-Fernsteurung-Schaltbare-Energieklasse/dp/B076WZQS4S/ref=sr_1_1 // https://www.aliexpress.com/store/product/BlitzWolf-BW-SHP6-EU-Plug-Metering-Version-WIFI-Smart-Socket-220V-240V-10A-Work-with-Amazon/1965360_32945504669.html GPIO_LED1_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_LEDLNK_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status GPIO_USER, // GPIO03 Serial TXD and Optional sensor 0, GPIO_HJL_CF, // GPIO05 BL0937 or HJL-01 CF power // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPIO_KEY1, // GPIO13 Button GPIO_NRG_CF1, // GPIO14 BL0937 or HJL-01 CF1 current / voltage GPIO_REL1, // GPIO15 Relay (0 = Off, 1 = On) 0, 0 }, { "Shelly 1", // SHELLY1 - Shelly1 Open Source (ESP8266 - 2MB) - https://shelly.cloud/shelly1-open-source/ 0, // GPIO00 - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC 0, // GPIO01 Serial RXD - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC 0, 0, // GPIO03 Serial TXD - Can be changed to GPIO_USER, only if Shelly is powered with 12V DC GPIO_REL1, // GPIO04 Relay (0 = Off, 1 = On) GPIO_SWT1_NP, // GPIO05 SW pin // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, 0, 0, 0, 0, 0 }, { "Shelly 2", // SHELLY2 - Shelly2 (ESP8266 - 2MB) - https://shelly.cloud/shelly2/ 0, GPIO_MCP39F5_TX, // GPIO01 MCP39F501 Serial input 0, GPIO_MCP39F5_RX, // GPIO03 MCP39F501 Serial output GPIO_REL1, // GPIO04 GPIO_REL2, // GPIO05 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_SWT1, // GPIO12 0, GPIO_SWT2, // GPIO14 GPIO_MCP39F5_RST, // GPIO15 MCP39F501 Reset 0, 0 }, { "Xiaomi Philips", // PHILIPS - Xiaomi Philips bulb (ESP8266) 0, 0, 0, 0, 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_PWM2, // GPIO12 cold/warm light 0, 0, GPIO_PWM1, // GPIO15 light intensity 0, 0 }, { "Neo Coolcam", // NEO_COOLCAM - Neo Coolcam (ESP8266) // https://www.banggood.com/NEO-COOLCAM-WiFi-Mini-Smart-Plug-APP-Remote-Control-Timing-Smart-Socket-EU-Plug-p-1288562.html?cur_warehouse=CN 0, 0, 0, 0, GPIO_LED1_INV, // GPIO04 Red Led (0 = On, 1 = Off) - Link and Power status 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On) GPIO_KEY1, // GPIO13 Button 0, 0, 0, 0 }, { "ESP Switch", // ESP_SWITCH - Michael Haustein 4 channel wall switch (ESP07 = ESP8266) // Use rules for further actions like - rule on power1#state do publish cmnd/other_device/power %value% endon GPIO_KEY2, // GPIO00 Button 2 GPIO_USER, // GPIO01 Serial RXD and Optional sensor GPIO_REL3_INV, // GPIO02 Yellow Led 3 (0 = On, 1 = Off) GPIO_USER, // GPIO03 Serial TXD and Optional sensor GPIO_KEY1, // GPIO04 Button 1 GPIO_REL2_INV, // GPIO05 Red Led 2 (0 = On, 1 = Off) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL4_INV, // GPIO12 Blue Led 4 (0 = On, 1 = Off) GPIO_KEY4, // GPIO13 Button 4 GPIO_KEY3, // GPIO14 Button 3 GPIO_LED1, // GPIO15 Optional sensor GPIO_REL1_INV, // GPIO16 Green Led 1 (0 = On, 1 = Off) 0 }, { "OBI Socket", // OBI - OBI socket (ESP8266) - https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706 GPIO_USER, // GPIO00 GPIO_USER, // GPIO01 Serial RXD 0, GPIO_USER, // GPIO03 Serial TXD GPIO_LED1, // GPIO04 Blue LED - Link and Power status GPIO_REL1, // GPIO05 (Relay OFF, but used as Relay Switch) // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_LED3, // GPIO12 (Relay ON, but set to LOW, so we can switch with GPIO05) GPIO_USER, // GPIO13 GPIO_KEY1, // GPIO14 Button 0, GPIO_USER, // GPIO16 ADC0_USER // ADC0 A0 Analog input }, { "Teckin", // TECKIN - https://www.amazon.de/gp/product/B07D5V139R 0, GPIO_KEY1, // GPIO01 Serial TXD and Button 0, GPIO_LED1_INV, // GPIO03 Serial RXD and Red Led (0 = On, 1 = Off) - Power status GPIO_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power GPIO_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPIO_LEDLNK_INV, // GPIO13 Blue Led (0 = On, 1 = Off) - Link status GPIO_REL1, // GPIO14 Relay (0 = Off, 1 = On) 0, 0, 0 }, { "AplicWDP303075", // APLIC_WDP303075 - Aplic WDP 303075 (ESP8285 - HLW8012 Energy Monitoring) // https://www.amazon.de/dp/B07CNWVNJ2 0, 0, 0, GPIO_KEY1, // GPIO03 Button GPIO_HLW_CF, // GPIO04 HLW8012 CF power GPIO_NRG_CF1, // GPIO05 HLW8012 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 HLW8012 CF Sel output (0 = Voltage) GPIO_LED1_INV, // GPIO13 LED (0 = On, 1 = Off) - Link and Power status GPIO_REL1, // GPIO14 Relay SRU 5VDC SDA (0 = Off, 1 = On ) 0, 0, 0 }, { "Tuya MCU", // TUYA_DIMMER - Tuya MCU device (ESP8266 w/ separate MCU) // https://www.amazon.com/gp/product/B07CTNSZZ8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 GPIO_USER, // Virtual Button (controlled by MCU) GPIO_USER, // GPIO01 MCU serial control GPIO_USER, GPIO_USER, // GPIO03 MCU serial control GPIO_USER, GPIO_USER, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_USER, GPIO_USER, GPIO_USER, // GPIO14 Green Led GPIO_USER, GPIO_USER, 0 }, { "Gosund SP1 v23", // GOSUND - https://www.amazon.de/gp/product/B0777BWS1P 0, GPIO_LEDLNK_INV, // GPIO01 Serial RXD and LED1 (blue) inv - Link status 0, GPIO_KEY1, // GPIO03 Serial TXD and Button GPIO_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power GPIO_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPIO_LED1_INV, // GPIO13 LED2 (red) inv - Power status GPIO_REL1, // GPIO14 Relay (0 = Off, 1 = On) 0, 0, 0 }, { "ARMTR Dimmer", // ARMTRONIX_DIMMERS - ARMTRONIX Dimmer, one or two channel (ESP8266 w/ separate MCU dimmer) // https://www.tindie.com/products/Armtronix/wifi-ac-dimmer-two-triac-board/ // https://www.tindie.com/products/Armtronix/wifi-ac-dimmer-esp8266-one-triac-board-alexaecho/ GPIO_USER, GPIO_TXD, // GPIO01 MCU serial control GPIO_USER, GPIO_RXD, // GPIO03 MCU serial control GPIO_USER, GPIO_USER, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_USER, GPIO_USER, GPIO_USER, GPIO_USER, GPIO_USER, 0 }, { "SK03 Outdoor", // SK03_TUYA - Outdoor smart plug with power monitoring HLW8012 chip - https://www.amazon.com/gp/product/B07CG7MBPV GPIO_KEY1, // GPIO00 Button 0, 0, 0, GPIO_HLW_CF, // GPIO04 HLW8012 CF power GPIO_NRG_CF1, // GPIO05 HLW8012 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 HLW8012 CF Sel output (0 = Voltage) GPIO_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off) - Power status GPIO_LEDLNK_INV, // GPIO14 Blue Led (0 = On, 1 = Off) - Link status GPIO_REL1, // GPIO15 Relay (0 = Off, 1 = On) 0, 0 }, { "PS-16-DZ", // PS_16_DZ - PS-16-DZ Dimmer (ESP8266 w/ separate Nuvoton MCU dimmer) // https://www.aliexpress.com/item/SM-Smart-WIFI-Wall-Dimmer-Light-Switch-US-Ewelink-APP-Remote-Control-Wi-Fi-Wirele-Work/32871151902.html GPIO_USER, GPIO_TXD, // GPIO01 MCU serial control GPIO_USER, GPIO_RXD, // GPIO03 MCU serial control GPIO_USER, GPIO_USER, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_USER, GPIO_LED1, // GPIO13 WiFi LED - Link and Power status GPIO_USER, GPIO_USER, GPIO_USER, 0 }, { "Teckin US", // TECKIN_US - Teckin SP20 US with Energy Monitoring // https://www.amazon.com/Outlet-Compatible-Monitoring-Function-Required/dp/B079Q5W22B // https://www.amazon.com/Outlet-ZOOZEE-Monitoring-Function-Compatible/dp/B07J2LR5KN GPIO_LED1_INV, // GPIO00 Red Led (1 = On, 0 = Off) - Power status 0, GPIO_LEDLNK_INV, // GPIO02 Blue Led (1 = On, 0 = Off) - Link status 0, GPIO_REL1, // GPIO04 Relay (0 = Off, 1 = On) GPIO_HJL_CF, // GPIO05 BL0937 or HJL-01 CF power // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPIO_KEY1, // GPIO13 Button GPIO_NRG_CF1, // GPIO14 BL0937 or HJL-01 CF1 current / voltage 0, 0, 0 }, { "Manzoku strip", // MANZOKU_EU_4 - "MANZOKU" labeled power strip, EU version // https://www.amazon.de/Steckdosenleiste-AOFO-Mehrfachsteckdose-Überspannungsschutz-Sprachsteuerung/dp/B07GBSD11P/ // https://www.amazon.de/Steckdosenleiste-Geekbes-USB-Anschluss-Kompatibel-gesteuert/dp/B078W23BW9/ 0, // GPIO00 0, // GPIO01 Serial RXD 0, GPIO_KEY1, // GPIO03 Serial TXD + Button GPIO_REL2, // GPIO04 Relay 2 GPIO_REL1, // GPIO05 Relay 1 // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL3, // GPIO12 Relay 3 GPIO_REL4, // GPIO13 Relay 4 GPIO_USER, // GPIO14 0, GPIO_USER, // GPIO16 0 }, { "OBI Socket 2", // OBI2 - OBI socket (ESP8266) - https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko-2-stueck-weiss/p/4077673 0, // GPIO00 0, // GPIO01 Serial RXD 0, 0, // GPIO03 Serial TXD GPIO_REL1, // GPIO04 Relay 1 GPIO_KEY1, // GPIO05 Button // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_LEDLNK_INV, // GPIO12 Green LED - Link status GPIO_LED1, // GPIO13 Red LED - Power status 0, 0, 0, 0 }, { "YTF IR Bridge", // YTF_IR_BRIDGE - https://www.aliexpress.com/item/Tuya-universal-Smart-IR-Hub-remote-control-Voice-Control-AC-TV-Work-With-Alexa-Google-Home/32951202513.html GPIO_USER, // GPIO00 GPIO_USER, // GPIO01 Serial RXD GPIO_USER, // GPIO02 GPIO_USER, // GPIO03 Serial TXD GPIO_LED1_INV, // GPIO04 Blue Led - Link status GPIO_IRRECV, // GPIO05 IR Receiver // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, // GPIO12 GPIO_KEY1, // GPIO13 Button GPIO_IRSEND, // GPIO14 IR Transmitter 0, 0, 0 }, { "Digoo DG-SP202", // DIGOO - Digoo DG-SP202 // https://www.banggood.com/DIGOO-DG-SP202-Dual-EU-Plug-Smart-WIFI-Socket-Individual-Controllable-Energy-Monitor-Remote-Control-Timing-Smart-Home-Outlet-let-p-1375323.html GPIO_KEY1, // GPIO00 Button1 0, // GPIO01 Serial RXD 0, // GPIO02 0, // GPIO03 Serial TXD GPIO_HJL_CF, // GPIO04 BL0937 or HJL-01 CF power GPIO_NRG_CF1, // GPIO05 BL0937 or HJL-01 CF1 current / voltage // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 BL0937 or HJL-01 Sel output (0 = Voltage) GPIO_LED1, // GPIO13 Blue Leds - Link Status GPIO_REL2, // GPIO14 Relay2 (0 = Off, 1 = On) and Red Led GPIO_REL1, // GPIO15 Relay1 (0 = Off, 1 = On) and Red Led GPIO_KEY2_NP, // GPIO16 Button2, externally pulled up 0 }, { "KA10", // KA10 - SMANERGY KA10 (ESP8285 - BL0937 Energy Monitoring) - https://www.amazon.es/dp/B07MBTCH2Y 0, // GPIO00 GPIO_LEDLNK_INV, // GPIO01 Blue LED - Link status 0, // GPIO02 GPIO_KEY1, // GPIO03 Button GPIO_HJL_CF, // GPIO04 BL0937 CF power GPIO_NRG_CF1, // GPIO05 BL0937 CF1 voltage / current // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 BL0937 Sel output (1 = Voltage) GPIO_LED1, // GPIO13 Red LED - Power status GPIO_REL1, // GPIO14 Relay 1 0, 0, 0 }, { "Luminea ZX2820", // ZX2820 GPIO_KEY1, // GPIO00 Button 0, 0, 0, GPIO_HLW_CF, // GPIO04 HLW8012 CF power GPIO_NRG_CF1, // GPIO05 HLW8012 CF1 voltage / current // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 HLW8012 SEL (0 = Voltage) GPIO_LED1_INV, // GPIO13 Green Led - Link and Power status GPIO_REL1, // GPIO14 Relay 0, 0, 0 }, { "Mi Desk Lamp", // MI_DESK_LAMP - Mi LED Desk Lamp - https://www.mi.com/global/smartlamp/ 0, 0, GPIO_KEY1, // GPIO02 Button 0, GPIO_PWM1, // GPIO04 Cold White GPIO_PWM2, // GPIO05 Warm White // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_ROT1A, // GPIO12 Rotary switch A pin GPIO_ROT1B, // GPIO13 Rotary switch B pin 0, 0, 0, 0 }, { "SP10", // SP10 - Tuya SP10 (BL0937 Energy Monitoring) // https://www.aliexpress.com/item/Smart-Mini-WiFi-Plug-Outlet-Switch-Work-With-ForEcho-Alexa-Google-Home-Remote-EU-Smart-Socket/32963670423.html 0, // GPIO00 GPIO_PWM1, // GPIO01 Nightlight 0, // GPIO02 GPIO_KEY1, // GPIO03 Button GPIO_HJL_CF, // GPIO04 BL0937 CF power GPIO_NRG_CF1, // GPIO05 BL0937 CF1 voltage / current // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_NRG_SEL_INV, // GPIO12 BL0937 Sel output (1 = Voltage) GPIO_LED1, // GPIO13 Blue LED - Link status GPIO_REL1, // GPIO14 Relay and red LED 0, 0, 0 }, { "WAGA CHCZ02MB", // WAGA - WAGA life CHCZ02MB (HJL-01 Energy Monitoring) // https://www.ebay.com/itm/332595697006 GPIO_LED1_INV, // GPIO00 Red LED 0, // GPIO01 Serial RXD 0, // GPIO02 GPIO_NRG_SEL_INV, // GPIO03 HJL-01 Sel output (1 = Voltage) 0, // GPIO04 GPIO_HJL_CF, // GPIO05 HJL-01 CF power // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_REL1, // GPIO12 Relay GPIO_KEY1, // GPIO13 Button GPIO_NRG_CF1, // GPIO14 HJL-01 CF1 voltage / current GPIO_LEDLNK_INV, // GPIO15 Blue LED - Link status 0, 0 }, { "SYF05", // SYF05 - Sunyesmart SYF05 (a.k.a. Fcmila) = TYWE3S + SM16726 // Also works with Merkury 904 RGBW Bulbs with 13 set to GPIO_SM16716_SEL // https://www.flipkart.com/fc-mila-bxav-xs-ad-smart-bulb/p/itmf85zgs45fzr7n // https://docs.tuya.com/en/hardware/WiFi-module/wifi-e3s-module.html // http://www.datasheet-pdf.com/PDF/SM16716-Datasheet-Sunmoon-932771 GPIO_USER, // GPIO00 N.C. 0, // GPIO01 Serial RXD GPIO_USER, // GPIO02 N.C. 0, // GPIO03 Serial TXD GPIO_SM16716_CLK, // GPIO04 SM16716 Clock GPIO_PWM1, // GPIO05 White // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) GPIO_USER, // GPIO12 Alt. White on some devices GPIO_USER, // GPIO13 SM16716 Enable on some devices GPIO_SM16716_DAT, // GPIO14 SM16716 Data 0, // GPIO15 wired to GND GPIO_USER, // GPIO16 N.C. ADC0_USER // ADC0 A0 Analog input }, { "Sonoff L1", // SONOFF_L1 - Sonoff L1 RGB LED controller (ESP8266 w/ separate Nuvoton MCU) 0, GPIO_TXD, // GPIO01 MCU serial control 0, GPIO_RXD, // GPIO03 MCU serial control 0, 0, // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) 0, // GPIO09 (SD_DATA2 Flash QIO or ESP8285) 0, // GPIO10 (SD_DATA3 Flash QIO or ESP8285) // GPIO11 (SD_CMD Flash) 0, GPIO_LED1_INV, // GPIO13 WiFi Blue Led - Link and Power status 0, 0, 0, 0 }, { "Sonoff iFan03", // SONOFF_IFAN03 - Sonoff iFan03 (ESP8285) GPIO_KEY1, // GPIO00 WIFI_KEY0 Button 1 GPIO_TXD, // GPIO01 ESP_TXD Serial RXD connection to P0.5 of RF microcontroller 0, // GPIO02 ESP_LOG GPIO_RXD, // GPIO03 ESP_RXD Serial TXD connection to P0.4 of RF microcontroller 0, // GPIO04 DEBUG_RX 0, // GPIO05 DEBUG_TX // GPIO06 (SD_CLK Flash) // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT) // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT) GPIO_REL1_INV, // GPIO09 WIFI_O0 Relay 1 (0 = Off, 1 = On) controlling the light GPIO_BUZZER_INV, // GPIO10 WIFI_O4 Buzzer (0 = Off, 1 = On) // GPIO11 (SD_CMD Flash) GPIO_REL3, // GPIO12 WIFI_O2 Relay 3 (0 = Off, 1 = On) controlling the fan GPIO_LED1_INV, // GPIO13 WIFI_CHK Blue Led on PCA (0 = On, 1 = Off) - Link and Power status GPIO_REL2, // GPIO14 WIFI_O1 Relay 2 (0 = Off, 1 = On) controlling the fan GPIO_REL4, // GPIO15 WIFI_O3 Relay 4 (0 = Off, 1 = On) controlling the fan 0, 0 } }; #endif // _SONOFF_TEMPLATE_H_