/*
xsns_80_mfrc522.ino - Support for MFRC522 (SPI) NFC Tag Reader on Tasmota
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#ifdef USE_SPI
#ifdef USE_RC522
/*********************************************************************************************\
* MFRC522 - 13.56 MHz RFID reader
*
* Connections:
* MFRC522 ESP8266 Tasmota
* ------- -------------- ----------
* SDA GPIO0..5,15,16 RC522 CS
* SCK GPIO14 SPI CLK
* MOSI GPIO13 SPI MOSI
* MISO GPIO12 SPI MISO
* IRQ not used
* Gnd Gnd
* Rst GPIO0..5,15,16 RC522 Rst
* 3V3 3V3
\*********************************************************************************************/
#define XSNS_80 80
//#define USE_RC522_DATA_FUNCTION // Add support for reading data block content (+0k4 code)
//#define USE_RC522_TYPE_INFORMATION // Add support for showing card type (+0k4 code)
#include
MFRC522 *Mfrc522;
struct RC522 {
char uids[21]; // Number of bytes in the UID. 4, 7 or 10
bool present = false;
uint8_t scantimer = 16;
} Rc522;
void RC522ScanForTag(void) {
// Reset the loop if no new card present on the sensor/reader. This saves the entire process when idle. And if present, select one.
if (!Mfrc522->PICC_IsNewCardPresent() || !Mfrc522->PICC_ReadCardSerial()) { return; }
ToHex_P((unsigned char*)Mfrc522->uid.uidByte, Mfrc522->uid.size, Rc522.uids, sizeof(Rc522.uids));
ResponseTime_P(PSTR(",\"RC522\":{\"UID\":\"%s\""), Rc522.uids);
MFRC522::PICC_Type picc_type = Mfrc522->PICC_GetType(Mfrc522->uid.sak);
#ifdef USE_RC522_DATA_FUNCTION
if ( picc_type == MFRC522::PICC_TYPE_MIFARE_MINI
|| picc_type == MFRC522::PICC_TYPE_MIFARE_1K
|| picc_type == MFRC522::PICC_TYPE_MIFARE_4K) {
MFRC522::MIFARE_Key key;
for (uint32_t i = 0; i < 6; i++) {
key.keyByte[i] = 0xFF;
}
MFRC522::StatusCode status = Mfrc522->PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, 1, &key, &(Mfrc522->uid));
if (status == MFRC522::STATUS_OK) {
uint8_t buffer[18]; // The buffer must be at least 18 bytes because a CRC_A is also returned
uint8_t size = sizeof(buffer);
status = (MFRC522::StatusCode) Mfrc522->MIFARE_Read(1, buffer, &size);
if (status == MFRC522::STATUS_OK) {
char card_datas[34];
for (uint32_t i = 0; i < size -2; i++) {
if ((isalpha(buffer[i])) || ((isdigit(buffer[i])))) {
card_datas[i] = char(buffer[i]);
} else {
card_datas[i] = '\0';
}
}
ResponseAppend_P(PSTR(",\"" D_JSON_DATA "\":\"%s\""), card_datas);
}
}
}
#endif // USE_RC522_DATA_FUNCTION
#ifdef USE_RC522_TYPE_INFORMATION
ResponseAppend_P(PSTR(",\"" D_JSON_TYPE "\":\"%s\""), Mfrc522->PICC_GetTypeName(picc_type));
#endif // USE_RC522_TYPE_INFORMATION
ResponseJsonEndEnd();
MqttPublishTeleSensor();
Mfrc522->PICC_HaltA(); // Halt PICC
Mfrc522->PCD_StopCrypto1(); // Stop encryption on PCD
Rc522.scantimer = 7; // Ignore tags found for two seconds
}
void RC522Init(void) {
if (PinUsed(GPIO_RC522_CS) && PinUsed(GPIO_RC522_RST) && TasmotaGlobal.spi_enabled) {
Mfrc522 = new MFRC522(Pin(GPIO_RC522_CS), Pin(GPIO_RC522_RST));
SPI.begin();
Mfrc522->PCD_Init();
// if (Mfrc522->PCD_PerformSelfTest()) { // Saves 0k5 code
uint8_t v = Mfrc522->PCD_ReadRegister(Mfrc522->VersionReg);
char ver[8] = { 0 };
switch (v) {
case 0x92: strcpy_P(ver, PSTR("v2.0")); break;
case 0x91: strcpy_P(ver, PSTR("v1.0")); break;
case 0x88: strcpy_P(ver, PSTR("clone")); break;
case 0x00: case 0xFF: strcpy_P(ver, PSTR("fail")); break;
}
uint8_t empty_uid[4] = { 0 };
ToHex_P((unsigned char*)empty_uid, sizeof(empty_uid), Rc522.uids, sizeof(Rc522.uids));
AddLog(LOG_LEVEL_INFO, PSTR("MFR: RC522 Rfid Reader detected %s"), ver);
Rc522.present = true;
// }
// Mfrc522->PCD_Init(); // Re-init as SelfTest blows init
}
}
#ifdef USE_WEBSERVER
void RC522Show(void) {
WSContentSend_PD(PSTR("{s}RC522 UID{m}%s{e}"), Rc522.uids);
}
#endif // USE_WEBSERVER
/*********************************************************************************************\
* Supported commands for Sensor80:
*
* Sensor80 1 - Show antenna gain
* Sensor80 1 - Set antenna gain 0..7 (default 4)
\*********************************************************************************************/
bool RC522Command(void) {
bool serviced = true;
char argument[XdrvMailbox.data_len];
for (uint32_t ca = 0; ca < XdrvMailbox.data_len; ca++) {
if ((' ' == XdrvMailbox.data[ca]) || ('=' == XdrvMailbox.data[ca])) { XdrvMailbox.data[ca] = ','; }
}
switch (XdrvMailbox.payload) {
case 1: // Antenna gain
uint8_t gain;
if (strchr(XdrvMailbox.data, ',') != nullptr) {
gain = strtol(ArgV(argument, 2), nullptr, 10) & 0x7;
Mfrc522->PCD_SetAntennaGain(gain << 4);
}
gain = Mfrc522->PCD_GetAntennaGain() >> 4; // 0..7
Response_P(PSTR("{\"Sensor80\":{\"Gain\":%d}}"), gain);
break;
}
return serviced;
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xsns80(uint8_t function) {
bool result = false;
if (FUNC_INIT == function) {
RC522Init();
}
else if (Rc522.present) {
switch (function) {
case FUNC_EVERY_250_MSECOND:
if (Rc522.scantimer) {
Rc522.scantimer--;
} else {
RC522ScanForTag();
}
break;
case FUNC_COMMAND_SENSOR:
if (XSNS_80 == XdrvMailbox.index) {
result = RC522Command();
}
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
RC522Show();
break;
#endif // USE_WEBSERVER
}
}
return result;
}
#endif // USE_RC522
#endif // USE_SPI