/*
  xdrv_11_knx.ino - KNX IP Protocol support for Sonoff-Tasmota

  Copyright (C) 2018  Adrian Scillato  (https://github.com/ascillato)

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifdef USE_KNX
/*********************************************************************************************\
 * KNX support
 *
 * Using libraries:
 *   ESP KNX IP library (https://github.com/envy/esp-knx-ip)

Constants in sonoff.h
-----------------------

#define MAX_KNX_GA             10            Max number of KNX Group Addresses to read that can be set
#define MAX_KNX_CB             10            Max number of KNX Group Addresses to write that can be set
                                             If you change MAX_KNX_CB you also have to change on the esp-knx-ip.h file the following:
                                                       #define MAX_CALLBACK_ASSIGNMENTS  10
                                                       #define MAX_CALLBACKS             10
                                             Both to MAX_KNX_CB

Variables in settings.h
-----------------------

bool          Settings.flag.knx_enabled             Enable/Disable KNX Protocol
uint16_t      Settings.knx_physsical_addr           Physical KNX address of this device
byte          Settings.knx_GA_registered            Number of group address to read
byte          Settings.knx_CB_registered            Number of group address to write
uint16_t      Settings.knx_GA_addr[MAX_KNX_GA]      Group address to read
uint16_t      Settings.knx_CB_addr[MAX_KNX_CB]      Group address to write
byte          Settings.knx_GA_param[MAX_KNX_GA]     Type of Input (relay changed, button pressed, sensor read)
byte          Settings.knx_CB_param[MAX_KNX_CB]     Type of Output (set relay, toggle relay, reply sensor value)

\*********************************************************************************************/

#include <esp-knx-ip.h>

//void KNX_CB_Action(message_t const &msg, void *arg);  // Define function (action callback) to be called by the KNX_IP Library
                                                      // when an action is requested by another KNX Device

address_t KNX_physs_addr;  // Physical KNX address of this device
address_t KNX_addr;        // KNX Address converter variable

#define KNX_Empty 255
#define KNX_TEMPERATURE 17
#define KNX_HUMIDITY 18
#define KNX_MAX_device_param 18

float last_temp;
float last_hum;

typedef struct __device_parameters
{
  byte type;           // PARAMETER_ID. Used as type of GA = relay, button, sensor, etc, (INPUTS)
                       // used when an action on device triggers a MSG to send on KNX
                       // Needed because this is the value that the ESP_KNX_IP library will pass as parameter
                       // to identify the action to perform when a MSG is received

  bool show;           // HARDWARE related. to identify if the parameter exists on the device.

  bool last_state;     // LAST_STATE of relays

  callback_id_t CB_id; // ACTION_ID. To store the ID value of Registered_CB to the library.
                       // The ESP_KNX_IP requires to register the callbacks, and then, to assign an address to the registered callback
                       // So CB_id is needed to store the ID of the callback to then, assign multiple addresses to the same ID (callback)
                       // It is used as type of CB = set relay, toggle relay, reply sensor, etc, (OUTPUTS)
                       // used when a MSG receive  KNX triggers an action on the device
                       // - Multiples address to the same callback (i.e. Set Relay 1 Status) are used on scenes for example
} device_parameters_t;

// device parameters (information that can be sent)
device_parameters_t device_param[] = {
  {  1, false, false, KNX_Empty }, // device_param[ 0] = Relay 1
  {  2, false, false, KNX_Empty }, // device_param[ 1] = Relay 2
  {  3, false, false, KNX_Empty }, // device_param[ 2] = Relay 3
  {  4, false, false, KNX_Empty }, // device_param[ 3] = Relay 4
  {  5, false, false, KNX_Empty }, // device_param[ 4] = Relay 5
  {  6, false, false, KNX_Empty }, // device_param[ 5] = Relay 6
  {  7, false, false, KNX_Empty }, // device_param[ 6] = Relay 7
  {  8, false, false, KNX_Empty }, // device_param[ 7] = Relay 8
  {  9, false, false, KNX_Empty }, // device_param[ 8] = Button 1
  { 10, false, false, KNX_Empty }, // device_param[ 9] = Button 2
  { 11, false, false, KNX_Empty }, // device_param[10] = Button 3
  { 12, false, false, KNX_Empty }, // device_param[11] = Button 4
  { 13, false, false, KNX_Empty }, // device_param[12] = Button 5
  { 14, false, false, KNX_Empty }, // device_param[13] = Button 6
  { 15, false, false, KNX_Empty }, // device_param[14] = Button 7
  { 16, false, false, KNX_Empty }, // device_param[15] = Button 8
  { KNX_TEMPERATURE, false, false, KNX_Empty }, // device_param[16] = Temperature
  { KNX_HUMIDITY   , false, false, KNX_Empty }, // device_param[17] = humidity
  { KNX_Empty, false, false, KNX_Empty}
};

// device parameters (information that can be sent)
const char * device_param_ga[] = {
  D_SENSOR_RELAY  " 1",   // Relay 1
  D_SENSOR_RELAY  " 2",   // Relay 2
  D_SENSOR_RELAY  " 3",   // Relay 3
  D_SENSOR_RELAY  " 4",   // Relay 4
  D_SENSOR_RELAY  " 5",   // Relay 5
  D_SENSOR_RELAY  " 6",   // Relay 6
  D_SENSOR_RELAY  " 7",   // Relay 7
  D_SENSOR_RELAY  " 8",   // Relay 8
  D_SENSOR_BUTTON " 1",   // Button 1
  D_SENSOR_BUTTON " 2",   // Button 2
  D_SENSOR_BUTTON " 3",   // Button 3
  D_SENSOR_BUTTON " 4",   // Button 4
  D_SENSOR_BUTTON " 5",   // Button 5
  D_SENSOR_BUTTON " 6",   // Button 6
  D_SENSOR_BUTTON " 7",   // Button 7
  D_SENSOR_BUTTON " 8",   // Button 8
  D_TEMPERATURE       ,   // Temperature
  D_HUMIDITY          ,   // Humidity
  nullptr
};

// device actions (posible actions to be performed on the device)
const char *device_param_cb[] = {
  D_SENSOR_RELAY " 1", // Set Relay 1 (1-On or 0-OFF)
  D_SENSOR_RELAY " 2",
  D_SENSOR_RELAY " 3",
  D_SENSOR_RELAY " 4",
  D_SENSOR_RELAY " 5",
  D_SENSOR_RELAY " 6",
  D_SENSOR_RELAY " 7",
  D_SENSOR_RELAY " 8",
  D_SENSOR_RELAY " 1 " D_BUTTON_TOGGLE, // Relay 1 Toggle (1 or 0 will toggle)
  D_SENSOR_RELAY " 2 " D_BUTTON_TOGGLE,
  D_SENSOR_RELAY " 3 " D_BUTTON_TOGGLE,
  D_SENSOR_RELAY " 4 " D_BUTTON_TOGGLE,
  D_SENSOR_RELAY " 5 " D_BUTTON_TOGGLE,
  D_SENSOR_RELAY " 6 " D_BUTTON_TOGGLE,
  D_SENSOR_RELAY " 7 " D_BUTTON_TOGGLE,
  D_SENSOR_RELAY " 8 " D_BUTTON_TOGGLE,
  D_REPLY " " D_TEMPERATURE, // Reply Temperature
  D_REPLY " " D_HUMIDITY,    // Reply Humidity
  nullptr
};


byte KNX_GA_Search( byte param, byte start = 0 )
{
  for (byte i = start; i < Settings.knx_GA_registered; ++i)
  {
    if ( Settings.knx_GA_param[i] == param )
    {
      if ( Settings.knx_GA_addr[i] != 0 ) // Relay has group address set? GA=0/0/0 can not be used as KNX address, so it is used here as a: not set value
      {
         if ( i >= start ) { return i; }
      }
    }
  }
  return KNX_Empty;
}


byte KNX_CB_Search( byte param, byte start = 0 )
{
  for (byte i = start; i < Settings.knx_CB_registered; ++i)
  {
    if ( Settings.knx_CB_param[i] == param )
    {
      if ( Settings.knx_CB_addr[i] != 0 )
      {
         if ( i >= start ) { return i; }
      }
    }
  }
  return KNX_Empty;
}


void KNX_ADD_GA( byte GAop, byte GA_FNUM, byte GA_AREA, byte GA_FDEF )
{
  // Check if all GA were assigned. If yes-> return
  if ( Settings.knx_GA_registered >= MAX_KNX_GA ) { return; }
  if ( GA_FNUM == 0 && GA_AREA == 0 && GA_FDEF == 0 ) { return; }

  // Assign a GA to that address
  Settings.knx_GA_param[Settings.knx_GA_registered] = GAop;
  KNX_addr.ga.area = GA_FNUM;
  KNX_addr.ga.line = GA_AREA;
  KNX_addr.ga.member = GA_FDEF;
  Settings.knx_GA_addr[Settings.knx_GA_registered] = KNX_addr.value;

  Settings.knx_GA_registered++;

  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_ADD " GA #%d: %s " D_TO " %d/%d/%d"),
   Settings.knx_GA_registered,
   device_param_ga[GAop-1],
   GA_FNUM, GA_AREA, GA_FDEF );
  AddLog(LOG_LEVEL_DEBUG);
}


void KNX_DEL_GA( byte GAnum )
{

  byte dest_offset = 0;
  byte src_offset = 0;
  byte len = 0;

  // Delete GA
  Settings.knx_GA_param[GAnum-1] = 0;

  if (GAnum == 1)
  {
    // start of array, so delete first entry
    src_offset = 1;
    // Settings.knx_GA_registered will be 1 in case of only one entry
    // Settings.knx_GA_registered will be 2 in case of two entries, etc..
    // so only copy anything, if there is it at least more then one element
    len = (Settings.knx_GA_registered - 1);
  }
  else if (GAnum == Settings.knx_GA_registered)
  {
    // last element, don't do anything, simply decrement counter
  }
  else
  {
    // somewhere in the middle
    // need to calc offsets

    // skip all prev elements
    dest_offset = GAnum -1 ; // GAnum -1 is equal to how many element are in front of it
    src_offset = dest_offset + 1; // start after the current element
    len = (Settings.knx_GA_registered - GAnum);
  }

  if (len > 0)
  {
    memmove(Settings.knx_GA_param + dest_offset, Settings.knx_GA_param + src_offset, len * sizeof(byte));
    memmove(Settings.knx_GA_addr + dest_offset, Settings.knx_GA_addr + src_offset, len * sizeof(uint16_t));
  }

  Settings.knx_GA_registered--;

  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_DELETE " GA #%d"),
    GAnum );
  AddLog(LOG_LEVEL_DEBUG);
}


void KNX_ADD_CB( byte CBop, byte CB_FNUM, byte CB_AREA, byte CB_FDEF )
{
  // Check if all callbacks were assigned. If yes-> return
  if ( Settings.knx_CB_registered >= MAX_KNX_CB ) { return; }
  if ( CB_FNUM == 0 && CB_AREA == 0 && CB_FDEF == 0 ) { return; }

  // Check if a CB for CBop was registered on the ESP-KNX-IP Library
  if ( device_param[CBop-1].CB_id == KNX_Empty )
  {
    // if no, register the CB for CBop
    device_param[CBop-1].CB_id = knx.callback_register("", KNX_CB_Action, &device_param[CBop-1]);
      // KNX IP Library requires a parameter
      // to identify which action was requested on the KNX network
      // to be performed on this device (set relay, etc.)
      // Is going to be used device_param[j].type that stores the type number (1: relay 1, etc)
  }
  // Assign a callback to CB address
  Settings.knx_CB_param[Settings.knx_CB_registered] = CBop;
  KNX_addr.ga.area = CB_FNUM;
  KNX_addr.ga.line = CB_AREA;
  KNX_addr.ga.member = CB_FDEF;
  Settings.knx_CB_addr[Settings.knx_CB_registered] = KNX_addr.value;

  knx.callback_assign( device_param[CBop-1].CB_id, KNX_addr );

  Settings.knx_CB_registered++;

  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_ADD " CB #%d: %d/%d/%d " D_TO " %s"),
   Settings.knx_CB_registered,
   CB_FNUM, CB_AREA, CB_FDEF,
   device_param_cb[CBop-1] );
  AddLog(LOG_LEVEL_DEBUG);
}


void KNX_DEL_CB( byte CBnum )
{
  byte oldparam = Settings.knx_CB_param[CBnum-1];
  byte dest_offset = 0;
  byte src_offset = 0;
  byte len = 0;

  // Delete assigment
  knx.callback_unassign(CBnum-1);
  Settings.knx_CB_param[CBnum-1] = 0;

  if (CBnum == 1)
  {
    // start of array, so delete first entry
    src_offset = 1;
    // Settings.knx_CB_registered will be 1 in case of only one entry
    // Settings.knx_CB_registered will be 2 in case of two entries, etc..
    // so only copy anything, if there is it at least more then one element
    len = (Settings.knx_CB_registered - 1);
  }
  else if (CBnum == Settings.knx_CB_registered)
  {
    // last element, don't do anything, simply decrement counter
  }
  else
  {
    // somewhere in the middle
    // need to calc offsets

    // skip all prev elements
    dest_offset = CBnum -1 ; // GAnum -1 is equal to how many element are in front of it
    src_offset = dest_offset + 1; // start after the current element
    len = (Settings.knx_CB_registered - CBnum);
  }

  if (len > 0)
  {
    memmove(Settings.knx_CB_param + dest_offset, Settings.knx_CB_param + src_offset, len * sizeof(byte));
    memmove(Settings.knx_CB_addr + dest_offset, Settings.knx_CB_addr + src_offset, len * sizeof(uint16_t));
  }

  Settings.knx_CB_registered--;

  // Check if there is no other assigment to that callback. If there is not. delete that callback register
  if ( KNX_CB_Search( oldparam ) == KNX_Empty ) {
    knx.callback_deregister( device_param[oldparam-1].CB_id );
    device_param[oldparam-1].CB_id =  KNX_Empty;
  }

  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_DELETE " CB #%d"), CBnum );
  AddLog(LOG_LEVEL_DEBUG);
}


bool KNX_CONFIG_NOT_MATCH()
{
  for (int i = 0; i < KNX_MAX_device_param; ++i)
  {
    if ( !device_param[i].show ) { // device has this parameter ?
      // if not, search for all registered group address to this parameter for deletion
      if ( KNX_GA_Search(i+1) != KNX_Empty ) { return true; }
      if ( (i < 8) || (i > 15) ) // check relays and sensors (i from 8 to 16 are toggle relays parameters)
      {
        if ( KNX_CB_Search(i+1) != KNX_Empty ) { return true; }
        if ( KNX_CB_Search(i+8) != KNX_Empty ) { return true; }
      }
    }
  }
  return false;
}


void KNXStart()
{
  knx.start(nullptr);
  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_START));
  AddLog(LOG_LEVEL_DEBUG);
}


void KNX_INIT()
{
  // Check for incompatible config
  if (Settings.knx_GA_registered > MAX_KNX_GA) { Settings.knx_GA_registered = MAX_KNX_GA; }
  if (Settings.knx_CB_registered > MAX_KNX_CB) { Settings.knx_CB_registered = MAX_KNX_CB; }

  // Set Physical KNX Address of the device
  KNX_physs_addr.value = Settings.knx_physsical_addr;
  knx.physical_address_set( KNX_physs_addr );

  // Read Configuration
  //   Check which relays, buttons and sensors where configured for this device
  //   and activate options according to the hardware
  for (int i = GPIO_REL1; i < GPIO_REL8 + 1; ++i)
  {
    if (GetUsedInModule(i, my_module.gp.io)) { device_param[i - GPIO_REL1].show = true; }
  }
  for (int i = GPIO_REL1_INV; i < GPIO_REL8_INV + 1; ++i)
  {
    if (GetUsedInModule(i, my_module.gp.io)) { device_param[i - GPIO_REL1_INV].show = true; }
  }
  for (int i = GPIO_SWT1; i < GPIO_SWT4 + 1; ++i)
  {
    if (GetUsedInModule(i, my_module.gp.io)) { device_param[i - GPIO_SWT1 + 8].show = true; }
  }
  for (int i = GPIO_KEY1; i < GPIO_KEY4 + 1; ++i)
  {
    if (GetUsedInModule(i, my_module.gp.io)) { device_param[i - GPIO_KEY1 + 8].show = true; }
  }
  if (GetUsedInModule(GPIO_DHT11, my_module.gp.io)) { device_param[KNX_TEMPERATURE-1].show = true; }
  if (GetUsedInModule(GPIO_DHT22, my_module.gp.io)) { device_param[KNX_TEMPERATURE-1].show = true; }
  if (GetUsedInModule(GPIO_SI7021, my_module.gp.io)) { device_param[KNX_TEMPERATURE-1].show = true; }
  if (GetUsedInModule(GPIO_DHT11, my_module.gp.io)) { device_param[KNX_HUMIDITY-1].show = true; }
  if (GetUsedInModule(GPIO_DHT22, my_module.gp.io)) { device_param[KNX_HUMIDITY-1].show = true; }
  if (GetUsedInModule(GPIO_SI7021, my_module.gp.io)) { device_param[KNX_HUMIDITY-1].show = true; }

  // Delete from KNX settings all configuration is not anymore related to this device
  if (KNX_CONFIG_NOT_MATCH()) {
    Settings.knx_GA_registered = 0;
    Settings.knx_CB_registered = 0;
    snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_DELETE " " D_KNX_PARAMETERS ));
    AddLog(LOG_LEVEL_DEBUG);
  }

  // Register Group Addresses to listen to
  //     Search on the settings if there is a group address set for receive KNX messages for the type: device_param[j].type
  //     If there is, register the group address on the KNX_IP Library to Receive data for Executing Callbacks
  byte j;
  for (byte i = 0; i < Settings.knx_CB_registered; ++i)
  {
    j = Settings.knx_CB_param[i];
    if ( j > 0 )
    {
      device_param[j-1].CB_id = knx.callback_register("", KNX_CB_Action, &device_param[j-1]); // KNX IP Library requires a parameter
                                                                                              // to identify which action was requested on the KNX network
                                                                                              // to be performed on this device (set relay, etc.)
                                                                                              // Is going to be used device_param[j].type that stores the type number (1: relay 1, etc)
      KNX_addr.value = Settings.knx_CB_addr[i];
      knx.callback_assign( device_param[j-1].CB_id, KNX_addr );
    }
  }
}


void KNX_CB_Action(message_t const &msg, void *arg)
{
  device_parameters_t *chan = (device_parameters_t *)arg;

  if (!(Settings.flag.knx_enabled)) { return; }

  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_RECEIVED_FROM " %d.%d.%d " D_COMMAND " %s: %d " D_TO " %s"),
   msg.received_on.ga.area, msg.received_on.ga.line, msg.received_on.ga.member,
   (msg.ct == KNX_CT_WRITE) ? D_KNX_COMMAND_WRITE : (msg.ct == KNX_CT_READ) ? D_KNX_COMMAND_READ : D_KNX_COMMAND_OTHER,
   msg.data[0],
   device_param_cb[(chan->type)-1]);
  AddLog(LOG_LEVEL_INFO);

  switch (msg.ct)
  {
    case KNX_CT_WRITE:
      if (chan->type < 9) // Set Relays
      {
        ExecuteCommandPower(chan->type, msg.data[0]);
      }
      else if (chan->type < 17) // Toggle Relays
      {
        ExecuteCommandPower((chan->type) -8, 2);
      }
      break;
    case KNX_CT_READ:
      if (chan->type < 9) // reply Relays status
      {
        knx.answer_1bit(msg.received_on, chan->last_state);
      }
      else if (chan->type = KNX_TEMPERATURE) // Reply Temperature
      {
        knx.answer_2byte_float(msg.received_on, last_temp);
      }
      else if (chan->type = KNX_HUMIDITY) // Reply Humidity
      {
        knx.answer_2byte_float(msg.received_on, last_hum);
      }
      break;
  }
}


void KnxUpdatePowerState(byte device, power_t state)
{
  if (!(Settings.flag.knx_enabled)) { return; }

  device_param[device -1].last_state = bitRead(state, device -1); // power state (on/off)

  // Search all the registered GA that has that output (variable: device) as parameter
  byte i = KNX_GA_Search(device);
  while ( i != KNX_Empty ) {
    KNX_addr.value = Settings.knx_GA_addr[i];
    knx.write_1bit(KNX_addr, device_param[device -1].last_state);

    snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "%s = %d " D_SENT_TO " %d.%d.%d"),
     device_param_ga[device -1], device_param[device -1].last_state,
     KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member);
    AddLog(LOG_LEVEL_INFO);

    i = KNX_GA_Search(device, i + 1);
  }
}


void KnxSendButtonPower(byte key, byte device, byte state)
{
// key 0 = button_topic
// key 1 = switch_topic
// state 0 = off
// state 1 = on
// state 2 = toggle
// state 3 = hold
// state 9 = clear retain flag
  if (!(Settings.flag.knx_enabled)) { return; }
//  if (key)
//  {

// Search all the registered GA that has that output (variable: device) as parameter
  byte i = KNX_GA_Search(device + 8);
  while ( i != KNX_Empty ) {
    KNX_addr.value = Settings.knx_GA_addr[i];
    knx.write_1bit(KNX_addr, !(state == 0));

    snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "%s = %d " D_SENT_TO " %d.%d.%d"),
     device_param_ga[device + 8], !(state == 0),
     KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member);
    AddLog(LOG_LEVEL_INFO);

    i = KNX_GA_Search(device + 8, i + 1);
  }
//  }
}


void KnxSensor(byte sensor_type, float value)
{
  if (sensor_type == KNX_TEMPERATURE)
  {
    last_temp = value;
  } else if (sensor_type == KNX_HUMIDITY)
  {
    last_hum = value;
  }

  if (!(Settings.flag.knx_enabled)) { return; }

  byte i = KNX_GA_Search(sensor_type);
  while ( i != KNX_Empty ) {
    KNX_addr.value = Settings.knx_GA_addr[i];
    knx.write_2byte_float(KNX_addr, value);

    snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "%s " D_SENT_TO " %d.%d.%d "),
     device_param_ga[sensor_type],
     KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member);
    AddLog(LOG_LEVEL_INFO);

    i = KNX_GA_Search(sensor_type, i+1);
  }
}


/*********************************************************************************************\
 * Presentation
\*********************************************************************************************/

#ifdef USE_WEBSERVER
const char S_CONFIGURE_KNX[] PROGMEM = D_CONFIGURE_KNX;

const char HTTP_FORM_KNX[] PROGMEM =
  "<fieldset><legend style='text-align:left;'><b>&nbsp;" D_KNX_PARAMETERS "&nbsp;</b></legend><form method='post' action='kn'>"
  "<br/><center>"
  "<b>" D_KNX_PHYSICAL_ADDRESS " </b>"
  "<input style='width:12%;' type='number' name='area' min='0' max='15' value='{kna'> . "
  "<input style='width:12%;' type='number' name='line' min='0' max='15' value='{knl'> . "
  "<input style='width:12%;' type='number' name='member' min='0' max='255' value='{knm'>"
  "<br/><br/>" D_KNX_PHYSICAL_ADDRESS_NOTE "<br/><br/>"
  "<input style='width:10%;' id='b1' name='b1' type='checkbox'";

const char HTTP_FORM_KNX2[] PROGMEM =
  "><b>" D_KNX_ENABLE "</b><br/></center><br/>"

  "<fieldset><center>"
  "<b>" D_KNX_GROUP_ADDRESS_TO_WRITE "</b><hr>"

  "<select name='GAop' style='width:25%;'>";

const char HTTP_FORM_KNX_OPT[] PROGMEM =
  "<option value='{vop}'>{nop}</option>";

const char HTTP_FORM_KNX_GA[] PROGMEM =
  "<input style='width:12%;' type='number' id='GAfnum' name='GAfnum' min='0' max='31' value='0'> / "
  "<input style='width:12%;' type='number' id='GAarea' name='GAarea' min='0' max='7' value='0'> / "
  "<input style='width:12%;' type='number' id='GAfdef' name='GAfdef' min='0' max='255' value='0'> ";

const char HTTP_FORM_KNX_ADD_BTN[] PROGMEM =
  "<button type='submit' onclick='fncbtnadd()' btndis name='btn_add' value='{btnval}' style='width:18%;'>" D_ADD "</button><br/><br/>"
  "<table style='width:80%; font-size: 14px;'><col width='250'><col width='30'>";

const char HTTP_FORM_KNX_ADD_TABLE_ROW[] PROGMEM =
  "<tr><td><b>{optex} -> GAfnum / GAarea / GAfdef </b></td>"
//  "<td><button type='submit' name='btn_del_ga' value='{opval}' style='background-color: #eb1e1e;'> " D_DELETE " </button></td></tr>";
  "<td><button type='submit' name='btn_del_ga' value='{opval}' class='button bred'> " D_DELETE " </button></td></tr>";

const char HTTP_FORM_KNX3[] PROGMEM =
  "</table></center></fieldset><br/>"
  "<fieldset><form method='post' action='kn'><center>"
  "<b>" D_KNX_GROUP_ADDRESS_TO_READ "</b><hr>";

const char HTTP_FORM_KNX4[] PROGMEM =
  "-> <select name='CBop' style='width:25%;'>";

const char HTTP_FORM_KNX_ADD_TABLE_ROW2[] PROGMEM =
  "<tr><td><b>GAfnum / GAarea / GAfdef -> {optex}</b></td>"
//  "<td><button type='submit' name='btn_del_cb' value='{opval}' style='background-color: #eb1e1e;'> " D_DELETE " </button></td></tr>";
  "<td><button type='submit' name='btn_del_cb' value='{opval}' class='button bred'> " D_DELETE " </button></td></tr>";


void HandleKNXConfiguration()
{
  char tmp[100];
  String stmp;

  if (HTTP_USER == webserver_state) {
    HandleRoot();
    return;
  }
  AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_KNX);

  if ( WebServer->hasArg("save") ) {
    KNX_Save_Settings();
    HandleConfiguration();
  }
  else
  {
    if ( WebServer->hasArg("btn_add") ) {
      if ( WebServer->arg("btn_add") == "1" ) {

        stmp = WebServer->arg("GAop"); //option selected
        byte GAop = stmp.toInt();
        stmp = WebServer->arg("GA_FNUM");
        byte GA_FNUM = stmp.toInt();
        stmp = WebServer->arg("GA_AREA");
        byte GA_AREA = stmp.toInt();
        stmp = WebServer->arg("GA_FDEF");
        byte GA_FDEF = stmp.toInt();

        KNX_ADD_GA( GAop, GA_FNUM, GA_AREA, GA_FDEF );

      }
      else
      {

        stmp = WebServer->arg("CBop"); //option selected
        byte CBop = stmp.toInt();
        stmp = WebServer->arg("CB_FNUM");
        byte CB_FNUM = stmp.toInt();
        stmp = WebServer->arg("CB_AREA");
        byte CB_AREA = stmp.toInt();
        stmp = WebServer->arg("CB_FDEF");
        byte CB_FDEF = stmp.toInt();

        KNX_ADD_CB( CBop, CB_FNUM, CB_AREA, CB_FDEF );

      }
    }
    else if ( WebServer->hasArg("btn_del_ga") )
    {

      stmp = WebServer->arg("btn_del_ga");
      byte GA_NUM = stmp.toInt();

      KNX_DEL_GA(GA_NUM);

    }
    else if ( WebServer->hasArg("btn_del_cb") )
    {

      stmp = WebServer->arg("btn_del_cb");
      byte CB_NUM = stmp.toInt();

      KNX_DEL_CB(CB_NUM);

    }

    String page = FPSTR(HTTP_HEAD);
    page.replace(F("{v}"), FPSTR(S_CONFIGURE_KNX));
    page += FPSTR(HTTP_HEAD_STYLE);
    page.replace(F("340px"), F("530px"));
    page += FPSTR(HTTP_FORM_KNX);
    KNX_physs_addr.value = Settings.knx_physsical_addr;
    page.replace(F("{kna"), String(KNX_physs_addr.pa.area));
    page.replace(F("{knl"), String(KNX_physs_addr.pa.line));
    page.replace(F("{knm"), String(KNX_physs_addr.pa.member));
    if ( Settings.flag.knx_enabled ) { page += F(" checked"); }

    page += FPSTR(HTTP_FORM_KNX2);
    for (byte i = 0; i < KNX_MAX_device_param ; i++)
    {
      if ( device_param[i].show )
      {
        page += FPSTR(HTTP_FORM_KNX_OPT);
        page.replace(F("{vop}"), String(device_param[i].type));
        page.replace(F("{nop}"), String(device_param_ga[i]));
      }
    }
    page += F("</select> -> ");
    page += FPSTR(HTTP_FORM_KNX_GA);
    page.replace(F("GAfnum"), F("GA_FNUM"));
    page.replace(F("GAarea"), F("GA_AREA"));
    page.replace(F("GAfdef"), F("GA_FDEF"));
    page.replace(F("GAfnum"), F("GA_FNUM"));
    page.replace(F("GAarea"), F("GA_AREA"));
    page.replace(F("GAfdef"), F("GA_FDEF"));
    page += FPSTR(HTTP_FORM_KNX_ADD_BTN);
    page.replace(F("{btnval}"), String(1));
    if (Settings.knx_GA_registered < MAX_KNX_GA) {
      page.replace(F("btndis"), F(" "));
    }
    else
    {
      page.replace(F("btndis"), F("disabled"));
    }
    page.replace(F("fncbtnadd"), F("GAwarning"));
    for (byte i = 0; i < Settings.knx_GA_registered ; ++i)
    {
      if ( Settings.knx_GA_param[i] )
      {
        page += FPSTR(HTTP_FORM_KNX_ADD_TABLE_ROW);
        page.replace(F("{opval}"), String(i+1));
        page.replace(F("{optex}"), String(device_param_ga[Settings.knx_GA_param[i]-1]));
        KNX_addr.value = Settings.knx_GA_addr[i];
        page.replace(F("GAfnum"), String(KNX_addr.ga.area));
        page.replace(F("GAarea"), String(KNX_addr.ga.line));
        page.replace(F("GAfdef"), String(KNX_addr.ga.member));
      }
    }
    page += FPSTR(HTTP_FORM_KNX3);
    page += FPSTR(HTTP_FORM_KNX_GA);
    page.replace(F("GAfnum"), F("CB_FNUM"));
    page.replace(F("GAarea"), F("CB_AREA"));
    page.replace(F("GAfdef"), F("CB_FDEF"));
    page.replace(F("GAfnum"), F("CB_FNUM"));
    page.replace(F("GAarea"), F("CB_AREA"));
    page.replace(F("GAfdef"), F("CB_FDEF"));
    page += FPSTR(HTTP_FORM_KNX4);
    for (byte i = 0; i < KNX_MAX_device_param ; i++)
    {
      if ( device_param[i].show )
      {
        page += FPSTR(HTTP_FORM_KNX_OPT);
        page.replace(F("{vop}"), String(device_param[i].type));
        page.replace(F("{nop}"), String(device_param_cb[i]));
      }
    }
    page += F("</select> ");
    page += FPSTR(HTTP_FORM_KNX_ADD_BTN);
    page.replace(F("{btnval}"), String(2));
    if (Settings.knx_CB_registered < MAX_KNX_CB) {
      page.replace(F("btndis"), F(" "));
    }
    else
    {
      page.replace(F("btndis"), F("disabled"));
    }
    page.replace(F("fncbtnadd"), F("CBwarning"));
    for (byte i = 0; i < Settings.knx_CB_registered ; ++i)
    {
      if ( Settings.knx_CB_param[i] )
      {
        page += FPSTR(HTTP_FORM_KNX_ADD_TABLE_ROW2);
        page.replace(F("{opval}"), String(i+1));
        page.replace(F("{optex}"), String(device_param_cb[Settings.knx_CB_param[i]-1]));
        KNX_addr.value = Settings.knx_CB_addr[i];
        page.replace(F("GAfnum"), String(KNX_addr.ga.area));
        page.replace(F("GAarea"), String(KNX_addr.ga.line));
        page.replace(F("GAfdef"), String(KNX_addr.ga.member));
      }
    }
    page += F("</table></center></fieldset>");
    page += F("<br/><button name='save' type='submit'>" D_SAVE "</button></form></fieldset>");
    page += FPSTR(HTTP_BTN_CONF);

    page.replace( F("</script>"),
      F("function GAwarning()"
        "{"
          "var GA_FNUM = document.getElementById('GA_FNUM');"
          "var GA_AREA = document.getElementById('GA_AREA');"
          "var GA_FDEF = document.getElementById('GA_FDEF');"
          "if ( GA_FNUM != null && GA_FNUM.value == '0' && GA_AREA.value == '0' && GA_FDEF.value == '0' ) {"
            "alert('" D_KNX_WARNING "');"
          "}"
        "}"
        "function CBwarning()"
        "{"
          "var CB_FNUM = document.getElementById('CB_FNUM');"
          "var CB_AREA = document.getElementById('CB_AREA');"
          "var CB_FDEF = document.getElementById('CB_FDEF');"
          "if ( CB_FNUM != null && CB_FNUM.value == '0' && CB_AREA.value == '0' && CB_FDEF.value == '0' ) {"
            "alert('" D_KNX_WARNING "');"
          "}"
        "}"
      "</script>") );
    ShowPage(page);
  }

}


void KNX_Save_Settings()
{
  String stmp;
  address_t KNX_addr;
  byte i;

  Settings.flag.knx_enabled = WebServer->hasArg("b1");
  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_ENABLED ": %d "),
   Settings.flag.knx_enabled);
  AddLog(LOG_LEVEL_DEBUG);

  stmp = WebServer->arg("area");
  KNX_addr.pa.area = stmp.toInt();
  stmp = WebServer->arg("line");
  KNX_addr.pa.line = stmp.toInt();
  stmp = WebServer->arg("member");
  KNX_addr.pa.member = stmp.toInt();
  Settings.knx_physsical_addr = KNX_addr.value;
  knx.physical_address_set( KNX_addr ); // Set Physical KNX Address of the device
  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX D_KNX_PHYSICAL_ADDRESS ": %d.%d.%d "),
   KNX_addr.pa.area, KNX_addr.pa.line, KNX_addr.pa.member );
  AddLog(LOG_LEVEL_DEBUG);

  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "GA: %d"),
   Settings.knx_GA_registered );
  AddLog(LOG_LEVEL_DEBUG);
  for (i = 0; i < Settings.knx_GA_registered ; ++i)
  {
    KNX_addr.value = Settings.knx_GA_addr[i];
    snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "GA #%d: %s " D_TO " %d/%d/%d"),
     i+1, device_param_ga[Settings.knx_GA_param[i]-1],
     KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member );
    AddLog(LOG_LEVEL_DEBUG);
  }

  snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "CB: %d"),
   Settings.knx_CB_registered );
  AddLog(LOG_LEVEL_DEBUG);
  for (i = 0; i < Settings.knx_CB_registered ; ++i)
  {
    KNX_addr.value = Settings.knx_CB_addr[i];
    snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_KNX "CB #%d: %d/%d/%d " D_TO " %s"),
     i+1,
     KNX_addr.ga.area, KNX_addr.ga.line, KNX_addr.ga.member,
     device_param_cb[Settings.knx_CB_param[i]-1] );
    AddLog(LOG_LEVEL_DEBUG);
  }
}

#endif  // USE_WEBSERVER


/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

#define XDRV_11

boolean Xdrv11(byte function)
{
  boolean result = false;
    switch (function) {
      case FUNC_INIT:
        KNX_INIT();
        break;
      case FUNC_LOOP:
        knx.loop();  // Process knx events
        break;
//      case FUNC_COMMAND:
//        result = KNXCommand();
//        break;
//      case FUNC_SET_POWER:
//        break;
    }
  return result;
}

#endif  // USE_KNX