/* support_features.ino - feature support for Tasmota Copyright (C) 2021 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /*********************************************************************************************\ * Feature list * * Note: When extending/updating feature[] also extend/update a_features in decode-status.py \*********************************************************************************************/ constexpr uint32_t feature[] = { #if defined(USE_ENERGY_SENSOR) && defined(USE_ENERGY_MARGIN_DETECTION) 0x00000001 | // xdrv_03_energy.ino #endif #ifdef USE_LIGHT 0x00000002 | // tasmota.ino, xdrv_04_light.ino #endif #ifdef USE_I2C 0x00000004 | // tasmota.ino #endif #ifdef USE_SPI 0x00000008 | // tasmota.ino #endif #ifdef USE_DISCOVERY 0x00000010 | // tasmota.ino #endif #ifdef USE_ARDUINO_OTA 0x00000020 | // tasmota.ino #endif #ifdef USE_MQTT_TLS 0x00000040 | // xdrv_02_mqtt.ino #endif #ifdef USE_WEBSERVER 0x00000080 | // xdrv_01_webserver.ino #endif #if defined(USE_WEBSERVER) && defined(WEBSERVER_ADVERTISE) 0x00000100 | // xdrv_01_webserver.ino #endif #if defined(USE_WEBSERVER) && defined(USE_EMULATION_HUE) 0x00000200 | // xdrv_20_hue.ino #endif //#if (MQTT_LIBRARY_TYPE == MQTT_PUBSUBCLIENT) 0x00000400 | // xdrv_02_mqtt.ino //#endif //#if (MQTT_LIBRARY_TYPE == MQTT_TASMOTAMQTT) // 0x00000800 | // xdrv_02_mqtt.ino //#endif #ifdef USE_MODBUS_BRIDGE 0x00001000 | // xdrv_63_modbus_bridge.ino #endif #if defined(USE_DISCOVERY) && defined(MQTT_HOST_DISCOVERY) 0x00002000 | // xdrv_02_mqtt.ino #endif #if defined(USE_LIGHT) && defined(USE_ARILUX_RF) 0x00004000 | // xdrv_04_light.ino #endif #if defined(USE_LIGHT) && defined(USE_WS2812) 0x00008000 | // xdrv_04_light.ino #endif #if defined(USE_LIGHT) && defined(USE_WS2812) && defined(USE_WS2812_DMA) 0x00010000 | // xdrv_04_light.ino #endif #if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL) 0x00020000 | // xdrv_05_irremote.ino #endif #ifdef USE_IR_HVAC 0x00040000 | // xdrv_05_irremote.ino #endif #if defined(USE_IR_REMOTE) && defined(USE_IR_RECEIVE) 0x00080000 | // xdrv_05_irremote.ino #endif #ifdef USE_DOMOTICZ 0x00100000 | // xdrv_07_domoticz.ino #endif #ifdef USE_DISPLAY 0x00200000 | // xdrv_13_display.ino #endif #ifdef USE_HOME_ASSISTANT 0x00400000 | // xdrv_12_home_assistant.ino #endif #ifdef USE_SERIAL_BRIDGE 0x00800000 | // xdrv_08_serial_bridge.ino #endif #ifdef USE_TIMERS 0x01000000 | // xdrv_09_timers.ino #endif #if defined(USE_TIMERS) && defined(USE_SUNRISE) 0x02000000 | // xdrv_09_timers.ino #endif #if defined(USE_TIMERS) && defined(USE_TIMERS_WEB) 0x04000000 | // xdrv_09_timers.ino #endif #ifdef USE_RULES 0x08000000 | // xdrv_10_rules.ino #endif #ifdef USE_KNX 0x10000000 | // xdrv_11_knx.ino #endif #ifdef USE_WPS 0x20000000 | // support.ino - removed with version 6.6.0.21 #endif #ifdef USE_SMARTCONFIG 0x40000000 | // support.ino - removed with version 6.6.0.21 #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_ENERGY_POWER_LIMIT) 0x80000000 | // xdrv_03_energy.ino #endif 0, #ifdef USE_CONFIG_OVERRIDE 0x00000001 | // user_config(_override).h #endif #ifdef FIRMWARE_MINIMAL 0x00000002 | // user_config(_override).h #endif #ifdef FIRMWARE_SENSORS 0x00000004 | // user_config(_override).h #endif #ifdef FIRMWARE_CLASSIC 0x00000008 | // user_config(_override).h #endif #ifdef FIRMWARE_KNX_NO_EMULATION 0x00000010 | // user_config(_override).h #endif #if defined(USE_DISPLAY) && defined(USE_DISPLAY_MODES1TO5) 0x00000020 | // xdrv_13_display.ino #endif #if defined(USE_DISPLAY) && defined(USE_DISPLAY_GRAPH) 0x00000040 | // xdrv_13_display.ino #endif #if defined(USE_I2C) && defined(USE_DISPLAY) && defined(USE_DISPLAY_LCD) 0x00000080 | // xdsp_01_lcd.ino #endif // REMOVED // #if defined(USE_I2C) && defined(USE_DISPLAY) && defined(USE_DISPLAY_SSD1306) // 0x00000100 | // xdsp_02_ssd1306.ino // #endif #if defined(USE_I2C) && defined(USE_DISPLAY) && defined(USE_DISPLAY_MATRIX) 0x00000200 | // xdsp_03_matrix.ino #endif // REMOVED // #if defined(USE_SPI) && defined(USE_DISPLAY) && defined(USE_DISPLAY_ILI9341) // 0x00000400 | // xdsp_04_ili9341.ino // #endif #if defined(USE_SPI) && defined(USE_DISPLAY) && defined(USE_DISPLAY_EPAPER_29) 0x00000800 | // xdsp_05_epaper.ino #endif // REMOVED // #if defined(USE_I2C) && defined(USE_DISPLAY) && defined(USE_DISPLAY_SH1106) // 0x00001000 | // xdsp_07_sh1106.ino // #endif #ifdef USE_MP3_PLAYER 0x00002000 | // xdrv_14_mp3.ino #endif #if defined(USE_I2C) && (defined(USE_PCA9685) || defined(USE_PCA9685_V2)) 0x00004000 | // xdrv_15_pca9685.ino or xdrv_15_pca9685_v2.ino #endif #if defined(USE_LIGHT) && defined(USE_TUYA_MCU) 0x00008000 | // xdrv_16_tuyadimmer.ino #endif #ifdef USE_RC_SWITCH 0x00010000 | // xdrv_17_rcswitch.ino #endif #if defined(USE_LIGHT) && defined(USE_ARMTRONIX_DIMMERS) 0x00020000 | // xdrv_18_armtronixdimmer.ino #endif #if defined(USE_LIGHT) && defined(USE_SM16716) 0x00040000 | // xdrv_04_light.ino #endif #ifdef USE_SCRIPT 0x00080000 | // xdrv_10_scripter.ino #endif #if defined(USE_WEBSERVER) && defined(USE_EMULATION_WEMO) 0x00100000 | // xdrv_21_wemo.ino #endif #ifdef USE_SONOFF_IFAN 0x00200000 | // xdrv_22_sonoff_ifan.ino #endif #ifdef USE_ZIGBEE 0x00400000 | // xdrv_23_zigbee.ino #endif #ifdef NO_EXTRA_4K_HEAP 0x00800000 | // sonoff_post.h #endif #ifdef VTABLES_IN_IRAM 0x01000000 | // platformio.ini #endif #ifdef VTABLES_IN_DRAM 0x02000000 | // platformio.ini #endif #ifdef VTABLES_IN_FLASH 0x04000000 | // platformio.ini #endif #ifdef PIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH 0x08000000 | // platformio.ini #endif #ifdef PIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY 0x10000000 | // platformio.ini #endif #ifdef PIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH 0x20000000 | // platformio.ini #endif #ifdef DEBUG_THEO 0x40000000 | // xdrv_99_debug.ino #endif #ifdef USE_DEBUG_DRIVER 0x80000000 | // xdrv_99_debug.ino #endif 0, #ifdef USE_COUNTER 0x00000001 | // xsns_01_counter.ino #endif #if defined(USE_ADC_VCC) || defined(USE_ADC) 0x00000002 | // xsns_02_analog.ino #endif #ifdef USE_ENERGY_SENSOR 0x00000004 | // xdrv_03_energy.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_PZEM004T) 0x00000008 | // xnrg_03_pzem004t.ino #endif #ifdef USE_DS18B20 0x00000010 | // xsns_05_ds18b20.ino - no more support since 6.6.0.18 #endif #ifdef USE_DS18x20_LEGACY 0x00000020 | // xsns_05_ds18x20_legacy.ino - no more support since 6.6.0.14 #endif #ifdef USE_DS18x20 0x00000040 | // xsns_05_ds18x20.ino #endif #ifdef USE_DHT 0x00000080 | // xsns_06_dht.ino #endif #if defined(USE_I2C) && defined(USE_SHT) 0x00000100 | // xsns_07_sht1x.ino #endif #if defined(USE_I2C) && defined(USE_HTU) 0x00000200 | // xsns_08_htu21.ino #endif #if defined(USE_I2C) && defined(USE_BMP) 0x00000400 | // xsns_09_bmp.ino #endif #if defined(USE_I2C) && defined(USE_BMP) && defined(USE_BME68X) 0x00000800 | // xsns_09_bmp.ino - BME68x #endif #if defined(USE_I2C) && defined(USE_BH1750) 0x00001000 | // xsns_10_bh1750.ino #endif #if defined(USE_I2C) && defined(USE_VEML6070) 0x00002000 | // xsns_11_veml6070.ino #endif #if defined(USE_I2C) && defined(USE_ADS1115_I2CDEV) 0x00004000 | // xsns_12_ads1115_i2cdev.ino #endif #if defined(USE_I2C) && defined(USE_ADS1115) 0x00008000 | // xsns_12_ads1115.ino #endif #if defined(USE_I2C) && defined(USE_INA219) 0x00010000 | // xsns_13_ina219.ino #endif #if defined(USE_I2C) && defined(USE_SHT3X) 0x00020000 | // xsns_14_sht3x.ino #endif #ifdef USE_MHZ19 0x00040000 | // xsns_15_mhz19.ino #endif #if defined(USE_I2C) && defined(USE_TSL2561) 0x00080000 | // xsns_16_tsl2561.ino #endif #ifdef USE_SENSEAIR 0x00100000 | // xsns_17_senseair.ino #endif #ifdef USE_PMS5003 0x00200000 | // xsns_18_pms5003.ino #endif #if defined(USE_I2C) && defined(USE_MGS) 0x00400000 | // xsns_19_mgs.ino #endif #ifdef USE_NOVA_SDS 0x00800000 | // xsns_20_novasds.ino #endif #if defined(USE_I2C) && defined(USE_SGP30) 0x01000000 | // xsns_21_sgp30.ino #endif #ifdef USE_SR04 0x02000000 | // xsns_22_sr04.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_SDM120) 0x04000000 | // xnrg_08_sdm120.ino #endif #if defined(USE_I2C) && defined(USE_SI1145) 0x08000000 | // xsns_24_si1145.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_SDM630) 0x10000000 | // xnrg_10_sdm630.ino #endif #if defined(USE_I2C) && defined(USE_LM75AD) 0x20000000 | // xsns_26_lm75ad.ino #endif #if defined(USE_I2C) && defined(USE_APDS9960) 0x40000000 | // xsns_27_apds9960.ino #endif #ifdef USE_TM1638 0x80000000 | // xdrv_66_tm1638.ino #endif 0, #if defined(USE_I2C) && defined(USE_MCP230xx) 0x00000001 | // xsns_29_mcp230xx.ino #endif #if defined(USE_I2C) && defined(USE_MPR121) 0x00000002 | // xsns_30_mpr121.ino #endif #if defined(USE_I2C) && (defined(USE_CCS811) || defined(USE_CCS811_V2)) 0x00000004 | // xsns_31_ccs811.ino or xsns_31_ccs811_v2.ino #endif #if defined(USE_I2C) && defined(USE_MPU6050) 0x00000008 | // xsns_32_mpu6050.ino #endif #if defined(USE_I2C) && defined(USE_MCP230xx) && defined(USE_MCP230xx_OUTPUT) 0x00000010 | // xsns_29_mcp230xx.ino #endif #if defined(USE_I2C) && defined(USE_MCP230xx) && defined(USE_MCP230xx_DISPLAYOUTPUT) 0x00000020 | // xsns_29_mcp230xx.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_HLW8012) 0x00000040 | // xnrg_01_hlw8012.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_CSE7766) 0x00000080 | // xnrg_02_cse7766.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_MCP39F501) 0x00000100 | // xnrg_04_mcp39f501.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_PZEM_AC) 0x00000200 | // xnrg_05_pzem_ac.ino #endif #if defined(USE_I2C) && defined(USE_DS3231) 0x00000400 | // xsns_33_ds3231.ino #endif #ifdef USE_HX711 0x00000800 | // xsns_34_hx711.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_PZEM_DC) 0x00001000 | // xnrg_06_pzem_dc.ino #endif #if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR) || defined(USE_WS2300_WIND_SENSOR) 0x00002000 | // xsns_35_tx20.ino #endif #if defined(USE_I2C) && defined(USE_MGC3130) 0x00004000 | // xsns_36_mgc3130.ino #endif #ifdef USE_RF_SENSOR 0x00008000 | // xsns_37_rfsensor.ino #endif #if defined(USE_RF_SENSOR) && defined(USE_THEO_V2) 0x00010000 | // xsns_37_rfsensor.ino #endif #if defined(USE_RF_SENSOR) && defined(USE_ALECTO_V2) 0x00020000 | // xsns_37_rfsensor.ino #endif #ifdef USE_AZ7798 0x00040000 | // xsns_38_az7798.ino #endif #ifdef USE_MAX31855 0x00080000 | // xsns_39_max31855.ino #endif #ifdef USE_PN532_HSU 0x00100000 | // xsns_40_pn532.ino #endif #if defined(USE_I2C) && defined(USE_MAX44009) 0x00200000 | // xsns_41_max44009.ino #endif #if defined(USE_I2C) && defined(USE_SCD30) 0x00400000 | // xsns_42_scd30.ino #endif #ifdef USE_HRE 0x00800000 | // xsns_43_hre.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_ADE7953) 0x01000000 | // xnrg_07_ade7953.ino #endif #if defined(USE_I2C) && defined(USE_SPS30) 0x02000000 | // xsns_44_sps30.ino #endif #if defined(USE_I2C) && defined(USE_VL53L0X) 0x04000000 | // xsns_45_vl53l0x.ino #endif #if defined(USE_I2C) && defined(USE_MLX90614) 0x08000000 | // xsns_46_MLX90614.ino #endif #ifdef USE_MAX31865 0x10000000 | // xsns_47-max31865.ino #endif #if defined(USE_I2C) && defined(USE_CHIRP) 0x20000000 | // xsns_48_chirp.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_SOLAX_X1) 0x40000000 | // xnrg_12_solaxX1.ino #endif #if defined(USE_I2C) && defined(USE_PAJ7620) 0x80000000 | // xsns_50_paj7620.ino #endif 0, #ifdef USE_BUZZER 0x00000001 | // xdrv_24_buzzer.ino #endif #ifdef USE_RDM6300 0x00000002 | // xsns_51_rdm6300.ino #endif #ifdef USE_IBEACON 0x00000004 | // xsns_52_ibeacon.ino #endif #ifdef USE_SML_M 0x00000008 | // xsns_53_sml.ino #endif #if defined(USE_I2C) && defined(USE_INA226) 0x00000010 | // xsns_54_ina226.ino #endif #ifdef USE_A4988_STEPPER 0x00000020 | // xdrv_25_A4988.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_DDS2382) 0x00000040 | // xnrg_09_dds2382.ino #endif #if defined(USE_LIGHT) && defined(USE_SM2135) 0x00000080 | // xdrv_026_sm2135.ino #endif #ifdef USE_SHUTTER 0x00000100 | // xdrv_027_shutter.ino #endif #if defined(USE_I2C) && defined(USE_PCF8574) 0x00000200 | // xdrv_028_pcf8574.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_DDSU666) 0x00000400 | // xnrg_11_ddsu666.ino #endif #ifdef USE_DEEPSLEEP 0x00000800 | // xdrv_029_deepsleep.ino #endif #ifdef USE_SONOFF_SC 0x00001000 | // xsns_04_snfsc.ino #endif #ifdef USE_SONOFF_RF 0x00002000 | // xdrv_06_snfbridge.ino #endif #if defined(USE_LIGHT) && defined(USE_SONOFF_L1) 0x00004000 | // xlgt_05_sonoff_l1.ino #endif #if defined(USE_LIGHT) && defined(USE_EXS_DIMMER) 0x00008000 | // xdrv_30_exs_dimmer.ino #endif #ifdef USE_TASMOTA_CLIENT 0x00010000 | // xdrv_31_tasmota_client.ino #endif #if defined(USE_I2C) && defined(USE_HIH6) 0x00020000 | // xsns_55_hih_series.ino #endif #ifdef USE_HPMA 0x00040000 | // xsns_56_hpma.ino #endif #if defined(USE_I2C) && defined(USE_TSL2591) 0x00080000 | // xsns_57_tsl2591.ino #endif #if defined(USE_I2C) && defined(USE_DHT12) 0x00100000 | // xsns_58_dht12.ino #endif #if defined(USE_I2C) && defined(USE_DS1624) 0x00200000 | // xsns_59_ds1624.ino #endif #ifdef USE_GPS 0x00400000 | // xsns_60_GPS.ino #endif #if defined(USE_I2C) && defined(USE_HOTPLUG) 0x00800000 | // xdrv_32_hotplug.ino #endif #ifdef USE_NRF24 0x01000000 | // xsns_33_nrf24l01.ino #endif #ifdef USE_MIBLE 0x02000000 | // xsns_61_MI_BLE.ino #endif #ifdef USE_HM10 0x04000000 | // xsns_62_MI_HM10.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_LE01MR) 0x08000000 | // xnrg_13_fif_le01mr.ino #endif #if defined(USE_I2C) && (defined(USE_AHT1x) || defined(USE_AHT2x)) 0x10000000 | // xsns_63_aht1x.ino #endif #if defined(USE_I2C) && defined(USE_WEMOS_MOTOR_V1) 0x20000000 | // xdrv_34_wemos_motor_v1.ino #endif #ifdef USE_DEVICE_GROUPS 0x40000000 | // support_device_groups.ino #endif #ifdef USE_PWM_DIMMER 0x80000000 | // xdrv_35_pwm_dimmer #endif 0, #ifdef USE_KEELOQ 0x00000001 | // xdrv_36_keeloq.ino #endif #ifdef USE_HRXL 0x00000002 | // xsns_64_hrxl.ino #endif #ifdef USE_SONOFF_D1 0x00000004 | // xdrv_37_sonoff_d1.ino #endif #if defined(USE_I2C) && defined(USE_HDC1080) 0x00000008 | // xsns_65_hdc1080.ino #endif #if defined(USE_I2C) && defined(USE_IAQ) 0x00000010 | // xsns_66_iAQ.ino #endif #if defined(USE_DISPLAY) && defined(USE_DISPLAY_SEVENSEG) 0x00000020 | // xdsp_11_sevenseg.ino #endif #if defined(USE_I2C) && defined(USE_AS3935) 0x00000040 | // xsns_67_as3935.ino #endif #ifdef USE_PING 0x00000080 | // xdrv_38_ping.ino #endif #ifdef USE_WINDMETER 0x00000100 | // xsns_68_windmeter.ino #endif #ifdef USE_OPENTHERM 0x00000200 | // xsns_69_opentherm.ino #endif #ifdef USE_THERMOSTAT 0x00000400 | // xdrv_39_heating.ino #endif #if defined(USE_I2C) && defined(USE_VEML6075) 0x00000800 | // xsns_70_veml6075.ino #endif #if defined(USE_I2C) && defined(USE_VEML7700) 0x00001000 | // xsns_71_veml7700.ino #endif #if defined(USE_I2C) && defined(USE_MCP9808) 0x00002000 | // xsns_72_mcp9808.ino #endif #if defined(USE_ENERGY_SENSOR) && (defined(USE_BL0940) || defined(USE_BL09XX)) 0x00004000 | // xnrg_14_bl09xx.ino #endif #ifdef USE_TELEGRAM 0x00008000 | // xdrv_40_telegram.ino #endif #if defined(USE_I2C) && defined(USE_HP303B) 0x00010000 | // xsns_73_hp303b.ino #endif #ifdef USE_TCP_BRIDGE 0x00020000 | // xdrv_41_tcp_bridge.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_TELEINFO) 0x00040000 | // xnrg_15_teleinfo.ino #endif #ifdef USE_LMT01 0x00080000 | // xsns_74_lmt01.ino #endif #ifdef USE_PROMETHEUS 0x00100000 | // xsns_75_prometheus.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_IEM3000) 0x00200000 | // xnrg_16_iem3000.ino #endif #ifdef USE_DYP 0x00400000 | // xsns_76_dyp.ino #endif #ifdef USE_I2S_AUDIO 0x00800000 | // xdrv_42_i2s_audio.ino #endif #ifdef USE_MLX90640 0x01000000 | // xdrv_43_mlx90640.ino #endif #if defined(USE_I2C) && defined(USE_VL53L1X) 0x02000000 | // xsns_77_vl53l1x.ino #endif #ifdef USE_MIEL_HVAC 0x04000000 | // xdrv_44_miel_hvac.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_WE517) 0x08000000 | // xnrg_17_ornowe517.ino #endif #if defined(USE_I2C) && defined(USE_EZOPH) 0x10000000 | // xsns_78_ezoph.ino #endif // #if defined(ESP32) && defined(USE_TTGO_WATCH) // 0x20000000 | // xdrv_83_esp32watch.ino // #endif #if defined(ESP32) && defined(USE_ETHERNET) 0x40000000 | // xdrv_82_ethernet.ino #endif #if defined(ESP32) && defined(USE_WEBCAM) 0x80000000 | // xdrv_81_webcam.ino #endif 0, #if defined(USE_I2C) && defined(USE_EZOORP) 0x00000001 | // xsns_78_ezoorp.ino #endif #if defined(USE_I2C) && defined(USE_EZORTD) 0x00000002 | // xsns_78_ezortd.ino #endif #if defined(USE_I2C) && defined(USE_EZOHUM) 0x00000004 | // xsns_78_ezohum.ino #endif #if defined(USE_I2C) && defined(USE_EZOEC) 0x00000008 | // xsns_78_ezoec.ino #endif #if defined(USE_I2C) && defined(USE_EZOCO2) 0x00000010 | // xsns_78_ezoco2.ino #endif #if defined(USE_I2C) && defined(USE_EZOO2) 0x00000020 | // xsns_78_ezoo2.ino #endif #if defined(USE_I2C) && defined(USE_EZOPRS) 0x00000040 | // xsns_78_ezoprs.ino #endif #if defined(USE_I2C) && defined(USE_EZOFLO) 0x00000080 | // xsns_78_ezoflo.ino #endif #if defined(USE_I2C) && defined(USE_EZODO) 0x00000100 | // xsns_78_ezodo.ino #endif #if defined(USE_I2C) && defined(USE_EZORGB) 0x00000200 | // xsns_78_ezorgb.ino #endif #if defined(USE_I2C) && defined(USE_EZOPMP) 0x00000400 | // xsns_78_ezopmp.ino #endif #ifdef USE_AS608 0x00000800 | // xsns_79_as608.ino #endif #if defined(USE_SHELLY_DIMMER) 0x00001000 | // xdrv_45_shelly_dimmer.ino #endif #ifdef USE_RC522 0x00002000 | // xsns_80_mfrc522.ino #endif #ifdef USE_FTC532 0x00004000 | // xdrv_47_ftc532.ino #endif #if defined(USE_SPI) && defined(USE_DISPLAY) && defined(USE_DISPLAY_EPAPER_42) 0x00008000 | // xdsp_06_epaper_42.ino #endif // #if defined(USE_SPI) && defined(USE_DISPLAY) && defined(USE_DISPLAY_ILI9488) // 0x00010000 | // xdsp_08_ILI9488.ino // #endif // #if defined(USE_SPI) && defined(USE_DISPLAY) && defined(USE_DISPLAY_SSD1351) // 0x00020000 | // xdsp_09_SSD1351.ino // #endif #if defined(USE_SPI) && defined(USE_DISPLAY) && defined(USE_DISPLAY_RA8876) 0x00040000 | // xdsp_10_RA8876.ino #endif // #if defined(USE_SPI) && defined(USE_DISPLAY) && defined(USE_DISPLAY_ST7789) // 0x00080000 | // xdsp_12_ST7789.ino // #endif // REMOVED // #if defined(USE_SPI) && defined(USE_DISPLAY) && defined(USE_DISPLAY_SSD1331) // 0x00100000 | // xdsp_14_SSD1331.ino // #endif #ifdef USE_UFILESYS 0x00200000 | // xdrv_50_filesystem.ino #endif #ifdef USE_TIMEPROP 0x00400000 | // xdrv_48_timeprop.ino #endif #ifdef USE_PID 0x00800000 | // xdrv_49_pid.ino #endif #ifdef USE_BS814A2 0x01000000 | // xdrv_51_bs814a2.ino #endif #if defined(USE_I2C) && defined(USE_SEESAW_SOIL) 0x02000000 | // xsns_81_seesaw_soil.ino #endif #ifdef USE_WIEGAND 0x04000000 | // xsns_82_wiegand.ino #endif #ifdef USE_NEOPOOL 0x08000000 | // xsns_83_neopool.ino #endif #if defined(USE_I2C) && defined(USE_TOF10120) 0x10000000 | // xsns_84_tof10120 #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_SDM72) 0x20000000 | // xnrg_18_sdm72.ino #endif #if defined(USE_DISPLAY) && defined(USE_DISPLAY_TM1637) 0x40000000 | #endif #ifdef USE_PROJECTOR_CTRL 0x80000000 | // xdrv_53_projector_ctrl.ino #endif 0, #if defined(USE_I2C) && defined(USE_MPU_ACCEL) 0x00000001 | // xsns_85_mpu6886.ino #endif #ifdef USE_TFMINIPLUS 0x00000002 | // xsns_86_tfminiplus.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_CSE7761) 0x00000004 | // xnrg_19_cse7761.ino #endif #ifdef USE_BERRY 0x00000008 | // xdrv_52_9_berry.ino #endif #if defined(USE_I2C) && defined(USE_BM8563) 0x00000010 | // xdrv_56_BM8563_RTC.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_ENERGY_DUMMY) 0x00000020 | // xnrg_30_dummy.ino #endif #if defined(USE_I2C) && defined(USE_AM2320) 0x00000040 | // xsns_88_am2320.ino #endif #if defined(USE_I2C) && defined(USE_T67XX) 0x00000080 | // xsns_89_t67xx.ino #endif #if defined(USE_SPI) && defined(USE_MCP2515) 0x00000100 | // xsns_87_mcp2515.ino #endif #ifdef USE_TASMESH 0x00000200 | // xdrv_57_9_tasmesh.ino #endif #ifdef USE_WIFI_RANGE_EXTENDER 0x00000400 | // xdrv_58_range_extender.ino #endif #ifdef USE_INFLUXDB 0x00000800 | // xdrv_59_influxdb.ino #endif #ifdef USE_HRG15 0x00001000 | // xsns_90_hrg15.ino #endif #ifdef USE_VINDRIKTNING 0x00002000 | // xsns_91_vindriktning.ino #endif #if defined(USE_I2C) && defined(USE_SCD40) 0x00004000 | // xsns_92_scd40.ino #endif #if defined(USE_I2C) && defined(USE_HM330X) 0x00008000 | // xsns_93_hm330x.ino #endif #if defined(USE_I2C) && defined(USE_HDC2010) 0x00010000 | // xsns_94_hdc2010.ino #endif #if defined(USE_LIGHT) && defined(USE_LSC_MCSL) 0x00020000 | // xlgt_07_lsc_mcsl.ino #endif #ifdef USE_SONOFF_SPM 0x00040000 | // xdrv_86_esp32_sonoff_spm.ino #endif #ifdef USE_SHIFT595 0x00080000 | // xdrv_60_shift595.ino #endif #ifdef USE_SDM230 0x00100000 | // xnrg_21_sdm230.ino #endif #ifdef USE_CM110x 0x00200000 | // xsns_95_cm110x.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_BL6523) 0x00400000 | // xnrg_22_bl6523.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_I2C) && defined(USE_ADE7880) 0x00800000 | // xnrg_23_ade7880.ino #endif #if defined(USE_I2C) && defined(USE_PCF85363) 0x01000000 | // xdrv_56_rtc_chips.ino #endif #if defined(USE_I2C) && defined(USE_DS3502) 0x02000000 | // xdrv_61_ds3502.ino #endif #ifdef USE_IMPROV 0x04000000 | // xdrv_62_improv.ino #endif #ifdef USE_FLOWRATEMETER 0x08000000 | // xsns_96_flowratemeter.ino #endif #if defined(USE_LIGHT) && defined(USE_BP5758D) 0x10000000 | // xlgt_08_bp5758d.ino #endif #if defined(USE_I2C) && defined(USE_HYT) 0x20000000 | // xsns_97_hyt.ino #endif #if defined(USE_LIGHT) && defined(USE_SM2335) 0x40000000 | // xlgt_09_sm2335.ino #endif #ifdef USE_DISPLAY_TM1621_SONOFF 0x80000000 | // xdrv_87_esp32_sonoff_tm1621.ino #endif 0, #if defined(USE_I2C) && defined(USE_SGP40) 0x00000001 | // xsns_98_sgp40.ino #endif #if defined(USE_I2C) && defined(USE_LUXV30B) 0x00000002 | // xsns_99_luxv30b.ino #endif #if defined(USE_SPI) && defined(USE_CANSNIFFER) 0x00000004 | // xsns_87_can_sniffer.ino #endif #if defined(USE_I2C) && defined(USE_QMC5883L) 0x00000008 | // xsns_33_qmc5882l.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_MODBUS_ENERGY) 0x00000010 | // xnrg_29_modbus.ino #endif #if defined(USE_SPI) && defined(USE_SHELLY_PRO) 0x00000020 | // xdrv_88_esp32_shelly_pro.ino #endif #ifdef USE_DALI 0x00000040 | // xdrv_89_esp32_dali.ino #endif #if defined(USE_LIGHT) && defined(USE_BP1658CJ) 0x00000080 | // xlgt_10_bp1658cj.ino #endif #ifdef USE_DINGTIAN_RELAY 0x00000100 | // xdrv_90_dingtian_relay.ino #endif #if defined(USE_I2C) && defined(USE_HMC5883L) 0x00000200 | // xsns_101_hmc5883l.ino #endif #ifdef USE_LD2410 0x00000400 | // xsns_102_ld2410.ino #endif #ifdef USE_ME007 0x00000800 | // xsns_23_me007.ino #endif #if defined(USE_I2C) && defined(USE_DISPLAY) && defined(USE_DISPLAY_TM1650) 0x00001000 | // xdsp_20_tm1650.ino #endif #if defined(USE_I2C) && defined(USE_PCA9632) 0x00002000 | // xdrv_64_pca9632.ino #endif #ifdef USE_TUYAMCUBR 0x00004000 | // xdrv_65_tuyamcubr.ino #endif #if defined(USE_I2C) && defined(USE_SEN5X) 0x00008000 | // xsns_103_sen5x.ino #endif #if defined(USE_ENERGY_SENSOR) && defined(USE_BIOPDU) 0x00010000 | // xnrg_24_biopdu.ino #endif #if (defined(USE_I2C) || defined(USE_SPI)) && defined(USE_MCP23XXX_DRV) 0x00020000 | // xdrv_67_mcp23xxx.ino #endif #if defined(USE_I2C) && defined(USE_PMSA003I) 0x00040000 | // xsns_104_pmsa003i.ino #endif #ifdef USE_LOX_O2 0x00080000 | // xsns_105_lox_o2.ino #endif #if defined(USE_I2C) && defined(USE_GDK101) 0x00100000 | // xsns_106_gdk101.ino #endif #ifdef USE_GM861 0x00200000 | // xsns_107_gm861.ino #endif #if defined(USE_I2C) && defined(USE_TC74) 0x00400000 | // xsns_108_tc74.ino #endif #if defined(USE_I2C) && defined(USE_PCA9557) 0x00800000 | // xdrv_69_pca9557.ino #endif #if defined(USE_I2C) && defined(USE_SGP4X) 0x01000000 | // xdrv_109_sgp4x.ino #endif #if defined(USE_I2C) && defined(USE_MAX17043) 0x02000000 | // xsns_110_max17043 #endif #if defined(USE_I2C) && defined(USE_ENS16x) 0x04000000 | // xsns_111_ens16x.ino #endif #if defined(USE_I2C) && defined(USE_ENS210) 0x08000000 | // xsns_112_ens210.ino #endif #ifdef USE_HC8 0x10000000 | // xsns_113_hc8.ino #endif #ifdef USE_HDMI_CEC 0x20000000 | // xdrv_70_1_hdmi_cec.ino #endif #ifdef USE_BLE_ESP32 0x40000000 | // xdrv_79_esp32_ble.ino #endif #ifdef USE_MATTER_DEVICE 0x80000000 | // xdrv_52_9_berry.ino #endif 0, #ifdef USE_MAGIC_SWITCH 0x00000001 | // xdrv_71_magic_switch.ino #endif #ifdef USE_PIPSOLAR 0x00000002 | // xdrv_72_pipsolar.ino #endif #ifdef USE_GPIO_VIEWER 0x00000004 | // xdrv_121_gpioviewer.ino #endif #if defined(USE_I2C) && defined(USE_AMSX915) 0x00000008 | // xsns_114_amsx915.ino #endif #if defined(USE_SPI) && defined(USE_SPI_LORA) 0x00000010 | // xdrv_73_9_lora.ino #endif #if defined(USE_I2C) && defined(USE_SPL06_007) 0x00000020 | // xsns_25_spl006-7_sensor.ino #endif #if defined(USE_I2C) && defined(USE_QMP6988) 0x00000040 | // xsns_28_qmp6988.ino #endif #ifdef USE_WOOLIIS 0x00000080 | // xsns_115_wooliis.ino #endif // 0x00000100 | // // 0x00000200 | // // 0x00000400 | // // 0x00000800 | // // 0x00001000 | // // 0x00002000 | // // 0x00004000 | // // 0x00008000 | // // 0x00010000 | // // 0x00020000 | // // 0x00040000 | // // 0x00080000 | // // 0x00100000 | // // 0x00200000 | // // 0x00400000 | // // 0x00800000 | // // 0x01000000 | // // 0x02000000 | // // 0x04000000 | // // 0x08000000 | // // 0x10000000 | // // 0x20000000 | // // 0x40000000 | // // 0x80000000 | // 0 }; /*********************************************************************************************/ void ResponseAppendFeatures(void) { ResponseAppend_P(PSTR(",\"" D_JSON_FEATURES "\":[\"%04X\""), LANGUAGE_LCID); // Locale ID for (uint32_t i = 0; i < (sizeof(feature) / sizeof(uint32_t)); i++) { ResponseAppend_P(PSTR(",\"%08X\""), feature[i]); // Tasmota feature list } ResponseAppend_P(PSTR("]")); }