/*
xdrv_15_pca9685.ino - Support for I2C PCA9685 12bit 16 pin hardware PWM driver on Tasmota
Copyright (C) 2019 Andre Thomas and Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#ifdef USE_I2C
#ifdef USE_PCA9685
/*********************************************************************************************\
* PCA9685 - 16-channel 12-bit pwm driver
*
* I2C Address: 0x40 .. 0x47
\*********************************************************************************************/
#define XDRV_15 15
#define XI2C_01 1 // See I2CDEVICES.md
#define PCA9685_REG_MODE1 0x00
#define PCA9685_REG_LED0_ON_L 0x06
#define PCA9685_REG_PRE_SCALE 0xFE
#ifndef USE_PCA9685_ADDR
#define USE_PCA9685_ADDR 0x40
#endif
#ifndef USE_PCA9685_FREQ
#define USE_PCA9685_FREQ 50
#endif
bool pca9685_detected = false;
uint16_t pca9685_freq = USE_PCA9685_FREQ;
uint16_t pca9685_pin_pwm_value[16];
void PCA9685_Detect(void)
{
if (I2cActive(USE_PCA9685_ADDR)) { return; }
uint8_t buffer;
if (I2cValidRead8(&buffer, USE_PCA9685_ADDR, PCA9685_REG_MODE1)) {
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_MODE1, 0x20);
if (I2cValidRead8(&buffer, USE_PCA9685_ADDR, PCA9685_REG_MODE1)) {
if (0x20 == buffer) {
pca9685_detected = true;
I2cSetActiveFound(USE_PCA9685_ADDR, "PCA9685");
PCA9685_Reset(); // Reset the controller
}
}
}
}
void PCA9685_Reset(void)
{
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_MODE1, 0x80);
PCA9685_SetPWMfreq(USE_PCA9685_FREQ);
for (uint32_t pin=0;pin<16;pin++) {
PCA9685_SetPWM(pin,0,false);
pca9685_pin_pwm_value[pin] = 0;
}
Response_P(PSTR("{\"PCA9685\":{\"RESET\":\"OK\"}}"));
}
void PCA9685_SetPWMfreq(double freq) {
/*
7.3.5 from datasheet
prescale value = round(25000000/(4096*freq))-1;
*/
if (freq > 23 && freq < 1527) {
pca9685_freq=freq;
} else {
pca9685_freq=50;
}
uint8_t pre_scale_osc = round(25000000/(4096*pca9685_freq))-1;
if (1526 == pca9685_freq) pre_scale_osc=0xFF; // force setting for 24hz because rounding causes 1526 to be 254
uint8_t current_mode1 = I2cRead8(USE_PCA9685_ADDR, PCA9685_REG_MODE1); // read current value of MODE1 register
uint8_t sleep_mode1 = (current_mode1&0x7F) | 0x10; // Determine register value to put PCA to sleep
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_MODE1, sleep_mode1); // Let's sleep a little
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_PRE_SCALE, pre_scale_osc); // Set the pre-scaler
I2cWrite8(USE_PCA9685_ADDR, PCA9685_REG_MODE1, current_mode1 | 0xA0); // Reset MODE1 register to original state and enable auto increment
}
void PCA9685_SetPWM_Reg(uint8_t pin, uint16_t on, uint16_t off) {
uint8_t led_reg = PCA9685_REG_LED0_ON_L + 4 * pin;
uint32_t led_data = 0;
I2cWrite8(USE_PCA9685_ADDR, led_reg, on);
I2cWrite8(USE_PCA9685_ADDR, led_reg+1, (on >> 8));
I2cWrite8(USE_PCA9685_ADDR, led_reg+2, off);
I2cWrite8(USE_PCA9685_ADDR, led_reg+3, (off >> 8));
}
void PCA9685_SetPWM(uint8_t pin, uint16_t pwm, bool inverted) {
if (4096 == pwm) {
PCA9685_SetPWM_Reg(pin, 4096, 0); // Special use additional bit causes channel to turn on completely without PWM
} else {
PCA9685_SetPWM_Reg(pin, 0, pwm);
}
pca9685_pin_pwm_value[pin] = pwm;
}
bool PCA9685_Command(void)
{
bool serviced = true;
bool validpin = false;
uint8_t paramcount = 0;
if (XdrvMailbox.data_len > 0) {
paramcount=1;
} else {
serviced = false;
return serviced;
}
char sub_string[XdrvMailbox.data_len];
for (uint32_t ca=0;ca 1) {
uint16_t new_freq = atoi(subStr(sub_string, XdrvMailbox.data, ",", 2));
if ((new_freq >= 24) && (new_freq <= 1526)) {
PCA9685_SetPWMfreq(new_freq);
Response_P(PSTR("{\"PCA9685\":{\"PWMF\":%i, \"Result\":\"OK\"}}"),new_freq);
return serviced;
}
} else { // No parameter was given for setfreq, so we return current setting
Response_P(PSTR("{\"PCA9685\":{\"PWMF\":%i}}"),pca9685_freq);
return serviced;
}
}
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 1),"PWM")) {
if (paramcount > 1) {
uint8_t pin = atoi(subStr(sub_string, XdrvMailbox.data, ",", 2));
if (paramcount > 2) {
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 3), "ON")) {
PCA9685_SetPWM(pin, 4096, false);
Response_P(PSTR("{\"PCA9685\":{\"PIN\":%i,\"PWM\":%i}}"),pin,4096);
serviced = true;
return serviced;
}
if (!strcmp(subStr(sub_string, XdrvMailbox.data, ",", 3), "OFF")) {
PCA9685_SetPWM(pin, 0, false);
Response_P(PSTR("{\"PCA9685\":{\"PIN\":%i,\"PWM\":%i}}"),pin,0);
serviced = true;
return serviced;
}
uint16_t pwm = atoi(subStr(sub_string, XdrvMailbox.data, ",", 3));
if ((pin >= 0 && pin <= 15) && (pwm >= 0 && pwm <= 4096)) {
PCA9685_SetPWM(pin, pwm, false);
Response_P(PSTR("{\"PCA9685\":{\"PIN\":%i,\"PWM\":%i}}"),pin,pwm);
serviced = true;
return serviced;
}
}
}
}
return serviced;
}
void PCA9685_OutputTelemetry(bool telemetry)
{
ResponseTime_P(PSTR(",\"PCA9685\":{\"PWM_FREQ\":%i,"),pca9685_freq);
for (uint32_t pin=0;pin<16;pin++) {
ResponseAppend_P(PSTR("\"PWM%i\":%i,"),pin,pca9685_pin_pwm_value[pin]);
}
ResponseAppend_P(PSTR("\"END\":1}}"));
if (telemetry) {
MqttPublishTeleSensor();
}
}
bool Xdrv15(uint8_t function)
{
if (!I2cEnabled(XI2C_01)) { return false; }
bool result = false;
if (FUNC_INIT == function) {
PCA9685_Detect();
}
else if (pca9685_detected) {
switch (function) {
case FUNC_EVERY_SECOND:
if (tele_period == 0) {
PCA9685_OutputTelemetry(true);
}
break;
case FUNC_COMMAND_DRIVER:
if (XDRV_15 == XdrvMailbox.index) {
result = PCA9685_Command();
}
break;
}
}
return result;
}
#endif // USE_PCA9685
#endif // USE_IC2