# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release-6.7.1/) 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. Support of Core versions before 2.7.1 has been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface only. Support for **WPS** and **SmartConfig** has been removed. ## Initial installation Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://arendst.github.io/Tasmota-firmware/). ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**. - **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota-AF.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash. - **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. - **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota/release-9.5.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32 based The following binary downloads have been compiled with ESP32/Arduino library core version **1.0.7.3**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota32_8M.bin** = The Tasmota version with most drivers including additional sensors and KNX for 8M+ flash. - **tasmota32_16M.bin** = The Tasmota version with most drivers including additional sensors and KNX for 16M+ flash. - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. - **tasmota32-AF.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash. - **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash. - **tasmota32-odroidgo.bin** = The Odroid-Go version is specifically tailored to Odroid_go hardware for 8M+ flash. - **tasmota32-core2.bin** = The Core2 version is specifically tailored to M5Stack Core2 hardware for 8M+ flash. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - http://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota32/release-9.5.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin`` ## Additional information [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v9.5.0.8 ### Added - Release of [Tasmota WebInstaller](https://arendst.github.io/Tasmota-firmware/) - Command ``SetOption2 1`` to enable display of global temperature/humidity/pressure info to JSON sensor message - Command ``SetOption127 1`` to force Wi-Fi in no-sleep mode even if ``Sleep 0`` is not enabled - Command ``SetOption128 0|1`` web referer check disabling HTTP API commands if set to 0. Default set to 1 for backward compatibility [#12828](https://github.com/arendst/Tasmota/issues/12828) - Command ``SetSensor1..127 0|1`` to globally disable individual sensor driver - Command ``Subscribe2 ...`` to subscribe to a MQTT topic without appended "/#" [#12858](https://github.com/arendst/Tasmota/issues/12858) - Command ``WebGetConfig `` if ``#define USE_WEBGETCONFIG`` is enabled to restore/init configuration from external webserver [#13034](https://github.com/arendst/Tasmota/issues/13034) - Command ``WebQuery GET|POST|PUT|PATCH [] `` to extent HTTP requests [#13209](https://github.com/arendst/Tasmota/issues/13209) - Optional IP filter to command ``TCPStart`` [#12806](https://github.com/arendst/Tasmota/issues/12806) - Neopool commands ``NPPHRes``, ``NPCLRes`` and ``NPIonRes`` [#12813](https://github.com/arendst/Tasmota/issues/12813) - Support for second DNS server - Support for influxdb using ``#define USE_INFLUXDB`` and several ``Ifx`` commands - Support for AM2320 Temperature and Humidity Sensor by Lars Wessels [#12485](https://github.com/arendst/Tasmota/issues/12485) - Support for Technoline WS2300-15 Anemometer [#12573](https://github.com/arendst/Tasmota/issues/12573) - Support for Telaire T6700 Series CO2 sensor by Alexander Savchenko [#12618](https://github.com/arendst/Tasmota/issues/12618) - Support for CAN bus and Freedom Won Battery Management System by Marius Bezuidenhout [#12651](https://github.com/arendst/Tasmota/issues/12651) - Support for IEM3155 Wattmeter [#12940](https://github.com/arendst/Tasmota/issues/12940) - Support for Hydreon RG-15 Solid State Rain sensor [#12974](https://github.com/arendst/Tasmota/issues/12974) - Support for IKEA VINDRIKTNING particle concentration sensor [#12976](https://github.com/arendst/Tasmota/issues/12976) - Support for Sensirion SCD40/SCD41 CO2 sensor [#13139](https://github.com/arendst/Tasmota/issues/13139) - Support for BL0939 energy monitor as used in ESP32 based Sonoff Dual R3 V2 Pow [#13195](https://github.com/arendst/Tasmota/issues/13195) - Initial support for Tasmota Mesh (TasMesh) providing node/broker communication using ESP-NOW [#11939](https://github.com/arendst/Tasmota/issues/11939) - Initial support for Wi-Fi extender [#12784](https://github.com/arendst/Tasmota/issues/12784) - Rule event support as JSON payload [#12496](https://github.com/arendst/Tasmota/issues/12496) - MQTT minimum password length restriction in GUI [#12553](https://github.com/arendst/Tasmota/issues/12553) - ESP32 Berry partition manager [#12465](https://github.com/arendst/Tasmota/issues/12465) - ESP32 Berry class ``webclient`` for HTTP/HTTPS requests - ESP32 Berry support for I2S audio mp3 playback - ESP32 Berry support for vararg - ESP32 Berry support for Curve 25519 EC crypto - ESP32 Berry support for ESP32/ESP32S2 DAC gpio - ESP32 Berry support for Serial - ESP32 support for (Yeelight) Mi Desk Pro using binary tasmota32solo1.bin - ESP32-S2 support for GPIOs - ESP32 add GPIO 6/7/8/11 to template and remove GPIO 28-31 (remapping so backwards compatible) - ESP32 crash recorder ``Status 12`` for ESP32/ESP32-S2/ESP32-C3, supporting Esp-idf 3.3/4.4 ### Changed - Move firmware binaries to https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - IRremoteESP8266 library from v2.7.18 to v2.7.20 - NeoPixelBus library from v2.6.3 to v2.6.7 - Message ``Upload buffer miscompare`` into ``Not enough space`` - Command ``DisplayDimmer`` has now range 0..100 instead of 0..15 - Speed up initial GUI console refresh - Enable UFILESYS, GUI_TRASH_FILE and GUI_EDIT_FILE for any device compiled with more than 1M flash size - Supported sensor driver range extended from 96 to 128 - Relax NTP poll if no ntpserver can be resolved by DNS - Shelly EM template needs to use GPIO ``ADE7953_IRQ 2`` - Make Sonoff L1 MusicSync persistent [#12008](https://github.com/arendst/Tasmota/issues/12008) - Simplified configuration for ir-full and removal of tasmota-ircustom [#12428](https://github.com/arendst/Tasmota/issues/12428) - Refactor platformio [#12442](https://github.com/arendst/Tasmota/issues/12442) - Allow buttons to work in AP normal mode [#12518](https://github.com/arendst/Tasmota/issues/12518) - Enable Ping and rule features for any device compiled with more than 1M flash size [#12539](https://github.com/arendst/Tasmota/issues/12539) - Replace spaces by hyphens in final hostname [#12710](https://github.com/arendst/Tasmota/issues/12710) - Default disable CORS for enhanced security and provide user compile option ``#define USE_CORS`` [#12827](https://github.com/arendst/Tasmota/issues/12827) - Prometheus: All metrics are prefixed with ``tasmota_`` [#12842](https://github.com/arendst/Tasmota/issues/12842) Memory metrics have been cleaned up to work consistently between ESP8266 and ESP32 The device name is reported as an info metric - ESP32 core library from v1.0.6 to v1.0.7.4 - ESP32 Ethernet Phy Type information to IDF v3+ - ESP32 internal sensor driver id moved from 87 to 127 - ESP32 disable PSRAM on unsupported hardware - ESP32 remove GPIO initialization to INPUT from not used GPIOs to allow JTAG support - ESP32 M5 Stack Core2 uses UNIVERSAL_DISPLAY with enabled LVGL as default now - ESP32 minimum PWM Frequency lowered to 2Hz [#13123](https://github.com/arendst/Tasmota/issues/13123) - ESP32 shrinked Webcam build, uses now `USE_TASMOTA_DISCOVERY` [#13148](https://github.com/arendst/Tasmota/issues/13148) ### Fixed - Sonoff L1 (lite) smoother color transitions - DDS238-2 wrong reactive power value [#12283](https://github.com/arendst/Tasmota/issues/12283) - NO VALID JSON regression from may 4th [#12440](https://github.com/arendst/Tasmota/issues/12440) - Telegram response decoding stopped working after 20210621 and exception on long result message [#12451](https://github.com/arendst/Tasmota/issues/12451) - Neopool compile error on DEBUG_TASMOTA_SENSOR [#12464](https://github.com/arendst/Tasmota/issues/12464) - Scripter and Display MQTT errors due to MQTT_DATA move to String [#12525](https://github.com/arendst/Tasmota/issues/12525) - Scripter moving average and sml input validation [#12541](https://github.com/arendst/Tasmota/issues/12541) - Zigbee Hue angle encoding [#12545](https://github.com/arendst/Tasmota/issues/12545) - Exception 28 when unable to send MQTT message and a topic name without a slash '/' [#12555](https://github.com/arendst/Tasmota/issues/12555) - Wi-Fi initial setup workaround for 11n only routers [#12566](https://github.com/arendst/Tasmota/issues/12566) - Discovery fails when using ``%hostname%`` in a topic [#12710](https://github.com/arendst/Tasmota/issues/12710) - Neopool communication error [#12813](https://github.com/arendst/Tasmota/issues/12813) - Shelly Dimmer 2 Energy usage [#12815](https://github.com/arendst/Tasmota/issues/12815) - WDT reset on shutters with stepper motors during deceleration [#12849](https://github.com/arendst/Tasmota/issues/12849) - Negative power values for ADE7953 based devices like Shelly EM [#12874](https://github.com/arendst/Tasmota/issues/12874) - Unable to disable MusicSync mode on Sonoff L1 Lite regression from 9.3.0 [#12930](https://github.com/arendst/Tasmota/issues/12930) - Wiegand support for keypad zero key in single key mode using ``SetOption124 1`` [#12960](https://github.com/arendst/Tasmota/issues/12960) - Hass and Tasmota discovery prefix topic notifications [#12972](https://github.com/arendst/Tasmota/issues/12972) - OpenTherm invalid JSON [#13028](https://github.com/arendst/Tasmota/issues/13028) - MQTT TLS related connection timing errors [#13033](https://github.com/arendst/Tasmota/issues/13033) - ESP32 core v2.0.0 setting hostname - ESP32-C3 settings layout for configuration backup and restore - ESP32-Solo OTA upgrade - ESP32 Webcam add boundary marker before sending mjpeg image [#12376](https://github.com/arendst/Tasmota/issues/12376) - ESP32 Berry button handlers and error messages [#12521](https://github.com/arendst/Tasmota/issues/12521) - ESP32 do not use chip temperature sensor as global temperature if external temperature sensor is used [#12630](https://github.com/arendst/Tasmota/issues/12630) - ESP32 buzzer in PWM mode exception [#12717](https://github.com/arendst/Tasmota/issues/12717) - ESP32 crash when PSRAM is absent and ``BOARD_HAS_PSRAM`` set [#13037](https://github.com/arendst/Tasmota/issues/13037)