/* user_config_override.h - user configuration overrides my_user_config.h for Tasmota Copyright (C) 2019 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _USER_CONFIG_OVERRIDE_H_ #define _USER_CONFIG_OVERRIDE_H_ // force the compiler to show a warning to confirm that this file is included #warning **** user_config_override.h: Using Settings from this File **** /*****************************************************************************************************\ * USAGE: * To modify the stock configuration without changing the my_user_config.h file: * (1) copy this file to "user_config_override.h" (It will be ignored by Git) * (2) define your own settings below * (3) for platformio: * define USE_CONFIG_OVERRIDE as a build flags. * ie1 : export PLATFORMIO_BUILD_FLAGS='-DUSE_CONFIG_OVERRIDE' * for Arduino IDE: * enable define USE_CONFIG_OVERRIDE in my_user_config.h ****************************************************************************************************** * ATTENTION: * - Changes to SECTION1 PARAMETER defines will only override flash settings if you change define CFG_HOLDER. * - Expect compiler warnings when no ifdef/undef/endif sequence is used. * - You still need to update my_user_config.h for major define USE_MQTT_TLS. * - All parameters can be persistent changed online using commands via MQTT, WebConsole or Serial. \*****************************************************************************************************/ /* Examples : // -- Master parameter control -------------------- #undef CFG_HOLDER #define CFG_HOLDER 4617 // [Reset 1] Change this value to load SECTION1 configuration parameters to flash // -- Setup your own Wifi settings --------------- #undef STA_SSID1 #define STA_SSID1 "YourSSID" // [Ssid1] Wifi SSID #undef STA_PASS1 #define STA_PASS1 "YourWifiPassword" // [Password1] Wifi password // -- Setup your own MQTT settings --------------- #undef MQTT_HOST #define MQTT_HOST "your-mqtt-server.com" // [MqttHost] #undef MQTT_PORT #define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT) #undef MQTT_USER #define MQTT_USER "YourMqttUser" // [MqttUser] Optional user #undef MQTT_PASS #define MQTT_PASS "YourMqttPass" // [MqttPassword] Optional password // You might even pass some parameters from the command line ---------------------------- // Ie: export PLATFORMIO_BUILD_FLAGS='-DUSE_CONFIG_OVERRIDE -DMY_IP="192.168.1.99" -DMY_GW="192.168.1.1" -DMY_DNS="192.168.1.1"' #ifdef MY_IP #undef WIFI_IP_ADDRESS #define WIFI_IP_ADDRESS MY_IP // Set to 0.0.0.0 for using DHCP or enter a static IP address #endif #ifdef MY_GW #undef WIFI_GATEWAY #define WIFI_GATEWAY MY_GW // if not using DHCP set Gateway IP address #endif #ifdef MY_DNS #undef WIFI_DNS #define WIFI_DNS MY_DNS // If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY) #endif */ #endif // _USER_CONFIG_OVERRIDE_H_