/* xdrv_23_zigbee.ino - zigbee support for Tasmota Copyright (C) 2021 Theo Arends and Stephan Hadinger This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifdef USE_ZIGBEE #define XDRV_23 23 #include "UnishoxStrings.h" const char kZbCommands[] PROGMEM = D_PRFX_ZB "|" // prefix // SetOption synonyms D_SO_ZIGBEE_NAMEKEY "|" D_SO_ZIGBEE_DEVICETOPIC "|" D_SO_ZIGBEE_NOPREFIX "|" D_SO_ZIGBEE_ENDPOINTSUFFIX "|" D_SO_ZIGBEE_NOAUTOBIND "|" D_SO_ZIGBEE_NAMETOPIC "|" D_SO_ZIGBEE_ENDPOINTTOPIC "|" D_SO_ZIGBEE_NOAUTOQUERY "|" D_SO_ZIGBEE_ZBRECEIVEDTOPIC "|" D_SO_ZIGBEE_OMITDEVICE "|" #ifdef USE_ZIGBEE_ZNP D_CMND_ZIGBEEZNPSEND "|" D_CMND_ZIGBEEZNPRECEIVE "|" #endif // USE_ZIGBEE_ZNP #ifdef USE_ZIGBEE_EZSP D_CMND_ZIGBEE_EZSP_SEND "|" D_CMND_ZIGBEE_EZSP_RECEIVE "|" D_CMND_ZIGBEE_EZSP_LISTEN "|" #endif // USE_ZIGBEE_EZSP D_CMND_ZIGBEE_PERMITJOIN "|" D_CMND_ZIGBEE_STATUS "|" D_CMND_ZIGBEE_RESET "|" D_CMND_ZIGBEE_SEND "|" D_CMND_ZIGBEE_PROBE "|" D_CMND_ZIGBEE_INFO "|" D_CMND_ZIGBEE_FORGET "|" D_CMND_ZIGBEE_SAVE "|" D_CMND_ZIGBEE_NAME "|" D_CMND_ZIGBEE_BIND "|" D_CMND_ZIGBEE_UNBIND "|" D_CMND_ZIGBEE_PING "|" D_CMND_ZIGBEE_MODELID "|" D_CMND_ZIGBEE_LIGHT "|" D_CMND_ZIGBEE_OCCUPANCY "|" D_CMND_ZIGBEE_RESTORE "|" D_CMND_ZIGBEE_BIND_STATE "|" D_CMND_ZIGBEE_MAP "|" D_CMND_ZIGBEE_LEAVE "|" D_CMND_ZIGBEE_CONFIG "|" D_CMND_ZIGBEE_DATA "|" D_CMND_ZIGBEE_SCAN ; SO_SYNONYMS(kZbSynonyms, 83, 89, 100, 101, 110, 112, 120, 116, 118, 119, ); void (* const ZigbeeCommand[])(void) PROGMEM = { #ifdef USE_ZIGBEE_ZNP &CmndZbZNPSend, &CmndZbZNPReceive, #endif // USE_ZIGBEE_ZNP #ifdef USE_ZIGBEE_EZSP &CmndZbEZSPSend, &CmndZbEZSPReceive, &CmndZbEZSPListen, #endif // USE_ZIGBEE_EZSP &CmndZbPermitJoin, &CmndZbStatus, &CmndZbReset, &CmndZbSend, &CmndZbProbe, &CmndZbInfo, &CmndZbForget, &CmndZbSave, &CmndZbName, &CmndZbBind, &CmndZbUnbind, &CmndZbPing, &CmndZbModelId, &CmndZbLight, &CmndZbOccupancy, &CmndZbRestore, &CmndZbBindState, &CmndZbMap, CmndZbLeave, &CmndZbConfig, &CmndZbData, &CmndZbScan, }; /********************************************************************************************/ // Initialize internal structures void ZigbeeInit(void) { // #pragma GCC diagnostic push // #pragma GCC diagnostic ignored "-Winvalid-offsetof" // Serial.printf(">>> offset %d %d %d\n", Z_offset(Z_Data_Light, dimmer), Z_offset(Z_Data_Light, x), Z_offset(Z_Data_Thermo, temperature)); // #pragma GCC diagnostic pop // Check if settings in Flash are set if (PinUsed(GPIO_ZIGBEE_RX) && PinUsed(GPIO_ZIGBEE_TX)) { if (0 == Settings.zb_channel) { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE D_ZIGBEE_RANDOMIZING_ZBCONFIG)); uint64_t mac64 = 0; // stuff mac address into 64 bits WiFi.macAddress((uint8_t*) &mac64); uint32_t esp_id = ESP_getChipId(); #ifdef ESP8266 uint32_t flash_id = ESP.getFlashChipId(); #endif // ESP8266 #ifdef ESP32 uint32_t flash_id = 0; #endif // ESP32 uint16_t pan_id = (mac64 & 0x3FFF); if (0x0000 == pan_id) { pan_id = 0x0001; } // avoid extreme values if (0x3FFF == pan_id) { pan_id = 0x3FFE; } // avoid extreme values Settings.zb_pan_id = pan_id; Settings.zb_ext_panid = 0xCCCCCCCC00000000L | (mac64 & 0x00000000FFFFFFFFL); Settings.zb_precfgkey_l = (mac64 << 32) | (esp_id << 16) | flash_id; Settings.zb_precfgkey_h = (mac64 << 32) | (esp_id << 16) | flash_id; Settings.zb_channel = USE_ZIGBEE_CHANNEL; Settings.zb_txradio_dbm = USE_ZIGBEE_TXRADIO_DBM; } if (Settings.zb_txradio_dbm < 0) { Settings.zb_txradio_dbm = -Settings.zb_txradio_dbm; #ifdef USE_ZIGBEE_EZSP EZ_reset_config = true; // force reconfigure of EZSP #endif SettingsSave(2); } #ifdef USE_ZIGBEE_EZSP // Check the I2C EEprom Wire.beginTransmission(USE_ZIGBEE_ZBBRIDGE_EEPROM); uint8_t error = Wire.endTransmission(); if (0 == error) { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS " 0x%02X"), USE_ZIGBEE_ZBBRIDGE_EEPROM); zigbee.eeprom_present = true; } #endif } // update commands with the current settings #ifdef USE_ZIGBEE_ZNP ZNP_UpdateConfig(Settings.zb_channel, Settings.zb_pan_id, Settings.zb_ext_panid, Settings.zb_precfgkey_l, Settings.zb_precfgkey_h); #endif #ifdef USE_ZIGBEE_EZSP EZ_UpdateConfig(Settings.zb_channel, Settings.zb_pan_id, Settings.zb_ext_panid, Settings.zb_precfgkey_l, Settings.zb_precfgkey_h, Settings.zb_txradio_dbm); #endif ZigbeeInitSerial(); } /*********************************************************************************************\ * Commands \*********************************************************************************************/ #ifdef USE_ZIGBEE_ZNP // Do a factory reset of the CC2530 const unsigned char ZIGBEE_FACTORY_RESET[] PROGMEM = { Z_SREQ | Z_SAPI, SAPI_WRITE_CONFIGURATION, CONF_STARTUP_OPTION, 0x01 /* len */, 0x01 /* STARTOPT_CLEAR_CONFIG */}; //"2605030101"; // Z_SREQ | Z_SAPI, SAPI_WRITE_CONFIGURATION, CONF_STARTUP_OPTION, 0x01 len, 0x01 STARTOPT_CLEAR_CONFIG #endif // USE_ZIGBEE_ZNP void CmndZbReset(void) { if (ZigbeeSerial) { switch (XdrvMailbox.payload) { case 1: #ifdef USE_ZIGBEE_ZNP ZigbeeZNPSend(ZIGBEE_FACTORY_RESET, sizeof(ZIGBEE_FACTORY_RESET)); #endif // USE_ZIGBEE_ZNP eraseZigbeeDevices(); // no break - this is intended case 2: // fall through Settings.zb_txradio_dbm = - abs(Settings.zb_txradio_dbm); TasmotaGlobal.restart_flag = 2; #ifdef USE_ZIGBEE_ZNP ResponseCmndChar_P(PSTR(D_JSON_ZIGBEE_CC2530 " " D_JSON_RESET_AND_RESTARTING)); #endif // USE_ZIGBEE_ZNP #ifdef USE_ZIGBEE_EZSP ResponseCmndChar_P(PSTR(D_JSON_ZIGBEE_EZSP " " D_JSON_RESET_AND_RESTARTING)); #endif // USE_ZIGBEE_EZSP break; default: ResponseCmndChar_P(PSTR(D_ZIGBEE_RESET_1_OR_2)); } } } /********************************************************************************************/ // // High-level function // Send a command specified as an HEX string for the workload. // The target endpoint is computed if zero, i.e. sent to the first known endpoint of the device. // // Inputs: // - shortaddr: 16-bits short address, or 0x0000 if group address // - groupaddr: 16-bits group address, or 0x0000 if unicast using shortaddr // - endpoint: 8-bits target endpoint (source is always 0x01), if 0x00, it will be guessed from ZbStatus information (basically the first endpoint of the device) // - clusterSpecific: boolean, is the message general cluster or cluster specific, used to create the FC byte of ZCL // - clusterIf: 16-bits cluster number // - param: pointer to HEX string for payload, should not be nullptr // Returns: None // void zigbeeZCLSendCmd(class ZCLMessage &zcl) { if ((0 == zcl.endpoint) && (zcl.validShortaddr())) { // endpoint is not specified, let's try to find it from shortAddr, unless it's a group address zcl.endpoint = zigbee_devices.findFirstEndpoint(zcl.shortaddr); if (0x00 == zcl.endpoint) { zcl.endpoint = 0x01; } // if we don't know the endpoint, try 0x01 //AddLog_P(LOG_LEVEL_DEBUG, PSTR("ZbSend: guessing endpoint 0x%02X"), endpoint); } // AddLog_P(LOG_LEVEL_DEBUG, PSTR("ZbSend: shortaddr 0x%04X, groupaddr 0x%04X, cluster 0x%04X, endpoint 0x%02X, cmd 0x%02X, data %_B"), // zcl.shortaddr, zcl.groupaddr, zcl.cluster, zcl.endpoint, zcl.cmd, &zcl.buf); if ((0 == zcl.endpoint) && (zcl.validShortaddr())) { // endpoint null is ok for group address AddLog_P(LOG_LEVEL_INFO, PSTR("ZbSend: unspecified endpoint")); return; } // everything is good, we can send the command if (!zcl.transacSet) { zcl.transac = zigbee_devices.getNextSeqNumber(zcl.shortaddr); zcl.transacSet = true; } AddLog_P(LOG_LEVEL_DEBUG, PSTR("ZigbeeZCLSend device: 0x%04X, group: 0x%04X, endpoint:%d, cluster:0x%04X, cmd:0x%02X, send:\"%_B\""), zcl.shortaddr, zcl.groupaddr, zcl.endpoint, zcl.cluster, zcl.cmd, &zcl.buf); ZigbeeZCLSend_Raw(zcl); // now set the timer, if any, to read back the state later if (zcl.clusterSpecific) { if (!Settings.flag5.zb_disable_autoquery) { // read back attribute value unless it is disabled sendHueUpdate(zcl.shortaddr, zcl.groupaddr, zcl.cluster, zcl.endpoint); } } } // Special encoding for multiplier: // multiplier == 0: ignore // multiplier == 1: ignore // multiplier > 0: divide by the multiplier // multiplier < 0: multiply by the -multiplier (positive) void ZbApplyMultiplier(double &val_d, int8_t multiplier) { if ((0 != multiplier) && (1 != multiplier)) { if (multiplier > 0) { // inverse of decoding val_d = val_d / multiplier; } else { val_d = val_d * (-multiplier); } } } // // Write Tuya-Moes attribute // bool ZbTuyaWrite(SBuffer & buf, const Z_attribute & attr) { double val_d = attr.getFloat(); const char * val_str = attr.getStr(); if (attr.key_is_str) { return false; } // couldn't find attr if so skip if (attr.isNum() && (1 != attr.attr_multiplier)) { ZbApplyMultiplier(val_d, attr.attr_multiplier); } uint32_t u32 = val_d; int32_t i32 = val_d; uint8_t tuyatype = (attr.key.id.attr_id >> 8); uint8_t dpid = (attr.key.id.attr_id & 0xFF); buf.add8(tuyatype); buf.add8(dpid); // the next attribute is length 16 bits in big endian // high byte is always 0x00 buf.add8(0); switch (tuyatype) { case 0x00: // raw { SBuffer buf_raw = SBuffer::SBufferFromHex(val_str, strlen(val_str)); if (buf_raw.len() > 255) { return false; } buf.add8(buf_raw.len()); buf.addBuffer(buf_raw); } break; case 0x01: // Boolean = uint8 case 0x04: // enum uint8 buf.add8(1); buf.add8(u32); break; case 0x02: // int32 buf.add8(4); buf.add32BigEndian(i32); break; case 0x03: // String { uint32_t s_len = strlen(val_str); if (s_len > 255) { return false; } buf.add8(s_len); buf.addBuffer(val_str, s_len); } break; case 0x05: // bitmap 1/2/4 so we use 4 bytes buf.add8(4); buf.add32BigEndian(u32); break; default: return false; } return true; } // // Send Attribute Write, apply mutlipliers before // bool ZbAppendWriteBuf(SBuffer & buf, const Z_attribute & attr, bool prepend_status_ok) { double val_d = attr.getFloat(); const char * val_str = attr.getStr(); if (attr.key_is_str) { return false; } // couldn't find attr if so skip if (attr.isNum() && (1 != attr.attr_multiplier)) { ZbApplyMultiplier(val_d, attr.attr_multiplier); } // push the value in the buffer buf.add16(attr.key.id.attr_id); // prepend with attribute identifier if (prepend_status_ok) { buf.add8(Z_SUCCESS); // status OK = 0x00 } buf.add8(attr.attr_type); // prepend with attribute type int32_t res = encodeSingleAttribute(buf, val_d, val_str, attr.attr_type); if (res < 0) { // remove the attribute type we just added // buf.setLen(buf.len() - (operation == ZCL_READ_ATTRIBUTES_RESPONSE ? 4 : 3)); AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE " %04X/%04X '0x%02X'"), attr.key.id.cluster, attr.key.id.attr_id, attr.attr_type); return false; } return true; } // // Parse "Report", "Write", "Response" or "Config" attribute // Operation is one of: ZCL_REPORT_ATTRIBUTES (0x0A), ZCL_WRITE_ATTRIBUTES (0x02) or ZCL_READ_ATTRIBUTES_RESPONSE (0x01) // void ZbSendReportWrite(class JsonParserToken val_pubwrite, class ZCLMessage & zcl) { zcl.buf.reserve(200); // buffer to store the binary output of attibutes SBuffer & buf = zcl.buf; // synonym if (nullptr == XdrvMailbox.command) { XdrvMailbox.command = (char*) ""; // prevent a crash when calling ReponseCmndChar and there was no previous command } bool tuya_protocol = zigbee_devices.isTuyaProtocol(zcl.shortaddr, zcl.endpoint); // iterate on keys for (auto key : val_pubwrite.getObject()) { JsonParserToken value = key.getValue(); Z_attribute attr; attr.setKeyName(key.getStr()); if (Z_parseAttributeKey(attr, tuya_protocol ? 0xEF00 : 0xFFFF)) { // favor tuya protocol if needed // Buffer ready, do some sanity checks // all attributes must use the same cluster if (0xFFFF == zcl.cluster) { zcl.cluster = attr.key.id.cluster; // set the cluster for this packet } else if (zcl.cluster != attr.key.id.cluster) { ResponseCmndChar_P(PSTR(D_ZIGBEE_TOO_MANY_CLUSTERS)); return; } } else { if (attr.key_is_str) { Response_P(PSTR("{\"%s\":\"%s'%s'\"}"), XdrvMailbox.command, PSTR(D_ZIGBEE_UNKNOWN_ATTRIBUTE " "), key); return; } if (Zunk == attr.attr_type) { Response_P(PSTR("{\"%s\":\"%s'%s'\"}"), XdrvMailbox.command, PSTR(D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE " "), key); return; } } // copy value from input to attribute, in numerical or string format if (value.isStr()) { attr.setStr(value.getStr()); } else if (value.isNum()) { attr.setFloat(value.getFloat()); } double val_d = 0; // I try to avoid `double` but this type capture both float and (u)int32_t without prevision loss const char* val_str = ""; // variant as string //////////////////////////////////////////////////////////////////////////////// // Split encoding depending on message if (zcl.cmd != ZCL_CONFIGURE_REPORTING) { if ((zcl.cluster == 0XEF00) && (zcl.cmd == ZCL_WRITE_ATTRIBUTES)) { // special case of Tuya / Moes / Lidl attributes if (buf.len() == 0) { // add the prefix to data buf.add8(0); // status buf.add8(zigbee_devices.getNextSeqNumber(zcl.shortaddr)); } zcl.clusterSpecific = true; zcl.cmd = 0x00; if (!ZbTuyaWrite(buf, attr)) { return; // error } } else if (!ZbAppendWriteBuf(buf, attr, zcl.cmd == ZCL_READ_ATTRIBUTES_RESPONSE)) { // general case return; // error } } else { // //////////////////////////////////////////////////////////////////////////////// // ZCL_CONFIGURE_REPORTING if (!value.isObject()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_JSON_REQUIRED)); return; } JsonParserObject attr_config = value.getObject(); bool attr_direction = false; uint32_t dir = attr_config.getUInt(PSTR("DirectionReceived"), 0); if (dir) { attr_direction = true; } // read MinInterval and MaxInterval, default to 0xFFFF if not specified uint16_t attr_min_interval = attr_config.getUInt(PSTR("MinInterval"), 0xFFFF); uint16_t attr_max_interval = attr_config.getUInt(PSTR("MaxInterval"), 0xFFFF); // read ReportableChange JsonParserToken val_attr_rc = attr_config[PSTR("ReportableChange")]; if (val_attr_rc) { val_d = val_attr_rc.getFloat(); val_str = val_attr_rc.getStr(); ZbApplyMultiplier(val_d, attr.attr_multiplier); } // read TimeoutPeriod uint16_t attr_timeout = attr_config.getUInt(PSTR("TimeoutPeriod"), 0x0000); bool attr_discrete = Z_isDiscreteDataType(attr.attr_type); // all fields are gathered, output the butes into the buffer, ZCL 2.5.7.1 // common bytes buf.add8(attr_direction ? 0x01 : 0x00); buf.add16(attr.key.id.attr_id); if (attr_direction) { buf.add16(attr_timeout); } else { buf.add8(attr.attr_type); buf.add16(attr_min_interval); buf.add16(attr_max_interval); if (!attr_discrete) { int32_t res = encodeSingleAttribute(buf, val_d, val_str, attr.attr_type); if (res < 0) { Response_P(PSTR("{\"%s\":\"%s'%s' 0x%02X\"}"), XdrvMailbox.command, PSTR(D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE " "), key, attr.attr_type); return; } } } } } // did we have any attribute? if (0 == buf.len()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NO_ATTRIBUTE)); return; } // all good, send the packet zigbeeZCLSendCmd(zcl); ResponseCmndDone(); } // Parse the "Send" attribute and send the command void ZbSendSend(class JsonParserToken val_cmd, ZCLMessage & zcl) { zcl.clusterSpecific = true; static const char delim[] = ", "; // delimiters for parameters // probe the type of the argument // If JSON object, it's high level commands // If String, it's a low level command if (val_cmd.isObject()) { // we have a high-level command JsonParserObject cmd_obj = val_cmd.getObject(); int32_t cmd_size = cmd_obj.size(); if (cmd_size > 1) { Response_P(PSTR(D_ZIGBEE_TOO_MANY_COMMANDS), cmd_size); return; } else if (1 == cmd_size) { // We have exactly 1 command, parse it JsonParserKey key = cmd_obj.getFirstElement(); JsonParserToken value = key.getValue(); uint32_t x = 0, y = 0, z = 0; uint16_t cmd_var; uint16_t local_cluster_id; const char * tasmota_cmd = zigbeeFindCommand(key.getStr(), &local_cluster_id, &cmd_var); if (tasmota_cmd == nullptr) { // did we find the command? Response_P(PSTR(D_ZIGBEE_UNRECOGNIZED_COMMAND), key.getStr()); return; } // check cluster if (0xFFFF == zcl.cluster) { zcl.cluster = local_cluster_id; } else if (zcl.cluster != local_cluster_id) { ResponseCmndChar_P(PSTR(D_ZIGBEE_TOO_MANY_CLUSTERS)); return; } // parse the JSON value, depending on its type fill in x,y,z if (value.isNum()) { x = value.getUInt(); // automatic conversion to 0/1 // if (value.is()) { // // x = value.as() ? 1 : 0; // } else if // } else if (value.is()) { // x = value.as(); } else { // if non-bool or non-int, trying char* const char *s_const = value.getStr(nullptr); // const char *s_const = value.as(); if (s_const != nullptr) { char s[strlen(s_const)+1]; strcpy(s, s_const); if ((nullptr != s) && (0x00 != *s)) { // ignore any null or empty string, could represent 'null' json value char *sval = strtok(s, delim); if (sval) { x = ZigbeeAliasOrNumber(sval); sval = strtok(nullptr, delim); if (sval) { y = ZigbeeAliasOrNumber(sval); sval = strtok(nullptr, delim); if (sval) { z = ZigbeeAliasOrNumber(sval); } } } } } } //AddLog_P(LOG_LEVEL_DEBUG, PSTR("ZbSend: command_template = %s"), cmd_str.c_str()); if (0xFF == cmd_var) { // if command number is a variable, replace it with x zcl.cmd = x; x = y; // and shift other variables y = z; } else { zcl.cmd = cmd_var; // or simply copy the cmd number } zigbeeCmdAddParams(zcl.buf, tasmota_cmd, x, y, z); // fill in parameters } else { // we have zero command, pass through until last error for missing command return; } zigbeeZCLSendCmd(zcl); } else if (val_cmd.isStr()) { // low-level command // Now parse the string to extract cluster, command, and payload // Parse 'cmd' in the form "AAAA_BB/CCCCCCCC" or "AAAA!BB/CCCCCCCC" // where AAAA is the cluster number, BB the command number, CCCC... the payload // First delimiter is '_' for a global command, or '!' for a cluster specific command const char * data = val_cmd.getStr(); uint16_t local_cluster_id = parseHex(&data, 4); // check cluster if (0xFFFF == zcl.cluster) { zcl.cluster = local_cluster_id; } else if (zcl.cluster != local_cluster_id) { ResponseCmndChar_P(PSTR(D_ZIGBEE_TOO_MANY_CLUSTERS)); return; } // delimiter if (('_' == *data) || ('!' == *data)) { if ('_' == *data) { zcl.clusterSpecific = false; } data++; } else { ResponseCmndChar_P(PSTR(D_ZIGBEE_WRONG_DELIMITER)); return; } // parse cmd number zcl.cmd = parseHex(&data, 2); // move to end of payload // delimiter is optional if ('/' == *data) { data++; } // skip delimiter zcl.buf.replace(SBuffer::SBufferFromHex(data, strlen(data))); zigbeeZCLSendCmd(zcl); } else { // we have an unsupported command type return; } ResponseCmndDone(); } // Parse the "Send" attribute and send the command void ZbSendRead(JsonParserToken val_attr, ZCLMessage & zcl) { // ZbSend {"Device":"0xF289","Cluster":0,"Endpoint":3,"Read":5} // ZbSend {"Device":"0xF289","Cluster":"0x0000","Endpoint":"0x0003","Read":"0x0005"} // ZbSend {"Device":"0xF289","Cluster":0,"Endpoint":3,"Read":[5,6,7,4]} // ZbSend {"Device":"0xF289","Endpoint":3,"Read":{"ModelId":true}} // ZbSend {"Device":"0xF289","Read":{"ModelId":true}} // ZbSend {"Device":"0xF289","ReadConig":{"Power":true}} // ZbSend {"Device":"0xF289","Cluster":6,"Endpoint":3,"ReadConfig":0} // params size_t attrs_len = 0; uint8_t* attrs = nullptr; // empty string is valid size_t attr_item_len = 2; // how many bytes per attribute, standard for "Read" size_t attr_item_offset = 0; // how many bytes do we offset to store attribute if (ZCL_READ_REPORTING_CONFIGURATION == zcl.cmd) { attr_item_len = 3; attr_item_offset = 1; } if (val_attr.isArray()) { // value is an array [] JsonParserArray attr_arr = val_attr.getArray(); attrs_len = attr_arr.size() * attr_item_len; attrs = (uint8_t*) calloc(attrs_len, 1); uint32_t i = 0; for (auto value : attr_arr) { uint16_t val = value.getUInt(); i += attr_item_offset; attrs[i++] = val & 0xFF; attrs[i++] = val >> 8; i += attr_item_len - 2 - attr_item_offset; // normally 0 } } else if (val_attr.isObject()) { // value is an object {} JsonParserObject attr_obj = val_attr.getObject(); attrs_len = attr_obj.size() * attr_item_len; attrs = (uint8_t*) calloc(attrs_len, 1); uint32_t actual_attr_len = 0; // iterate on keys for (auto key : attr_obj) { JsonParserToken value = key.getValue(); bool found = false; // scan attributes to find by name, and retrieve type for (uint32_t i = 0; i < nitems(Z_PostProcess); i++) { const Z_AttributeConverter *converter = &Z_PostProcess[i]; uint16_t local_attr_id = pgm_read_word(&converter->attribute); uint16_t local_cluster_id = CxToCluster(pgm_read_byte(&converter->cluster_short)); // uint8_t local_type_id = pgm_read_byte(&converter->type); if ((pgm_read_word(&converter->name_offset)) && (0 == strcasecmp_P(key.getStr(), Z_strings + pgm_read_word(&converter->name_offset)))) { // match name // check if there is a conflict with cluster // TODO if (!(value.getBool()) && attr_item_offset) { // If value is false (non-default) then set direction to 1 (for ReadConfig) attrs[actual_attr_len] = 0x01; } actual_attr_len += attr_item_offset; attrs[actual_attr_len++] = local_attr_id & 0xFF; attrs[actual_attr_len++] = local_attr_id >> 8; actual_attr_len += attr_item_len - 2 - attr_item_offset; // normally 0 found = true; // check cluster if (!zcl.validCluster()) { zcl.cluster = local_cluster_id; } else if (zcl.cluster != local_cluster_id) { ResponseCmndChar_P(PSTR(D_ZIGBEE_TOO_MANY_CLUSTERS)); if (attrs) { free(attrs); } return; } break; // found, exit loop } } if (!found) { AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE D_ZIGBEE_UNKNWON_ATTRIBUTE), key.getStr()); } } attrs_len = actual_attr_len; } else { // value is a literal if (zcl.validCluster()) { uint16_t val = val_attr.getUInt(); attrs_len = attr_item_len; attrs = (uint8_t*) calloc(attrs_len, 1); attrs[0 + attr_item_offset] = val & 0xFF; // little endian attrs[1 + attr_item_offset] = val >> 8; } } if (attrs_len > 0) { // all good, send the packet zcl.buf.reserve(attrs_len); zcl.buf.setLen(0); // clear any previous buffer zcl.buf.addBuffer(attrs, attrs_len); zigbeeZCLSendCmd(zcl); ResponseCmndDone(); } else { ResponseCmndChar_P(PSTR(D_ZIGBEE_MISSING_PARAM)); } if (attrs) { free(attrs); } } // // Command `ZbSend` // // Examples: // ZbSend {"Device":"0x0000","Endpoint":1,"Write":{"0006/0000":0}} // ZbSend {"Device":"0x0000","Endpoint":1,"Write":{"Power":0}} // ZbSend {"Device":"0x0000","Endpoint":1,"Write":{"AqaraRotate":0}} // ZbSend {"Device":"0x0000","Endpoint":1,"Write":{"AqaraRotate":12.5}} // ZbSend {"Device":"0x0000","Endpoint":1,"Write":{"006/0000%39":12.5}} // ZbSend {"Device":"0x0000","Endpoint":1,"Write":{"AnalogInApplicationType":1000000}} // ZbSend {"Device":"0x0000","Endpoint":1,"Write":{"TimeZone":-1000000}} // ZbSend {"Device":"0x0000","Endpoint":1,"Write":{"Manufacturer":"Tasmota","ModelId":"Tasmota Z2T Router"}} void CmndZbSend(void) { // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Power":1} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Power":"3"} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Power":"0xFF"} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Power":null} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Power":false} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Power":true} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Power":"true"} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"ShutterClose":null} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Power":1} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Color":"1,2"} } // ZbSend { "device":"0x1234", "endpoint":"0x03", "send":{"Color":"0x1122,0xFFEE"} } if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } JsonParser parser(XdrvMailbox.data); JsonParserObject root = parser.getRootObject(); if (!root) { ResponseCmndChar_P(PSTR(D_JSON_INVALID_JSON)); return; } // params ZCLMessage zcl; // prepare the ZCL structure // parse "Device" and "Group" JsonParserToken val_device = root[PSTR(D_CMND_ZIGBEE_DEVICE)]; if (val_device) { zcl.shortaddr = zigbee_devices.parseDeviceFromName(val_device.getStr()).shortaddr; if (!zcl.validShortaddr()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_INVALID_PARAM)); return; } } if (!zcl.validShortaddr()) { // if not found, check if we have a group JsonParserToken val_group = root[PSTR(D_CMND_ZIGBEE_GROUP)]; if (val_group) { zcl.groupaddr = val_group.getUInt(); } else { // no device nor group ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } } // from here, either device has a device shortaddr, or if BAD_SHORTADDR then use group address // Note: groupaddr == 0 is valid // read other parameters zcl.cluster = root.getUInt(PSTR(D_CMND_ZIGBEE_CLUSTER), zcl.cluster); zcl.endpoint = root.getUInt(PSTR(D_CMND_ZIGBEE_ENDPOINT), zcl.endpoint); zcl.manuf = root.getUInt(PSTR(D_CMND_ZIGBEE_MANUF), zcl.manuf); // infer endpoint if (!zcl.validShortaddr()) { zcl.endpoint = 0xFF; // endpoint not used for group addresses, so use a dummy broadcast endpoint } else if (!zcl.validEndpoint()) { // if it was not already specified, try to guess it zcl.endpoint = zigbee_devices.findFirstEndpoint(zcl.shortaddr); AddLog_P(LOG_LEVEL_DEBUG, PSTR("ZIG: guessing endpoint %d"), zcl.endpoint); } if (!zcl.validEndpoint()) { // after this, if it is still zero, then it's an error ResponseCmndChar_P(PSTR("Missing endpoint")); return; } // from here endpoint is valid and non-zero // cluster may be already specified or 0xFFFF JsonParserToken val_cmd = root[PSTR(D_CMND_ZIGBEE_SEND)]; JsonParserToken val_read = root[PSTR(D_CMND_ZIGBEE_READ)]; JsonParserToken val_write = root[PSTR(D_CMND_ZIGBEE_WRITE)]; JsonParserToken val_publish = root[PSTR(D_CMND_ZIGBEE_REPORT)]; JsonParserToken val_response = root[PSTR(D_CMND_ZIGBEE_RESPONSE)]; JsonParserToken val_read_config = root[PSTR(D_CMND_ZIGBEE_READ_CONFIG)]; JsonParserToken val_config = root[PSTR(D_CMND_ZIGBEE_CONFIG)]; uint32_t multi_cmd = ((bool)val_cmd) + ((bool)val_read) + ((bool)val_write) + ((bool)val_publish) + ((bool)val_response) + ((bool)val_read_config) + ((bool)val_config); if (multi_cmd > 1) { ResponseCmndChar_P(PSTR("Can only have one of: 'Send', 'Read', 'Write', 'Report', 'Reponse', 'ReadConfig' or 'Config'")); return; } // from here we have one and only one command zcl.clusterSpecific = false; /* not cluster specific */ zcl.needResponse = false; /* no response */ zcl.direct = false; /* discover route */ if (val_cmd) { // "Send":{...commands...} // we accept either a string or a JSON object ZbSendSend(val_cmd, zcl); } else if (val_read) { // "Read":{...attributes...}, "Read":attribute or "Read":[...attributes...] // we accept eitehr a number, a string, an array of numbers/strings, or a JSON object zcl.cmd = ZCL_READ_ATTRIBUTES; ZbSendRead(val_read, zcl); } else if (val_write) { // only KSON object if (!val_write.isObject()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_MISSING_PARAM)); return; } // "Write":{...attributes...} zcl.cmd = ZCL_WRITE_ATTRIBUTES; ZbSendReportWrite(val_write, zcl); } else if (val_publish) { // "Publish":{...attributes...} // only KSON object if (!val_publish.isObject()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_MISSING_PARAM)); return; } zcl.cmd = ZCL_REPORT_ATTRIBUTES; ZbSendReportWrite(val_publish, zcl); } else if (val_response) { // "Report":{...attributes...} // only KSON object if (!val_response.isObject()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_MISSING_PARAM)); return; } zcl.cmd = ZCL_READ_ATTRIBUTES_RESPONSE; ZbSendReportWrite(val_response, zcl); } else if (val_read_config) { // "ReadConfg":{...attributes...}, "ReadConfg":attribute or "ReadConfg":[...attributes...] // we accept eitehr a number, a string, an array of numbers/strings, or a JSON object zcl.cmd = ZCL_READ_REPORTING_CONFIGURATION; ZbSendRead(val_read_config, zcl); } else if (val_config) { // "Config":{...attributes...} // only JSON object if (!val_config.isObject()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_MISSING_PARAM)); return; } zcl.cmd = ZCL_CONFIGURE_REPORTING; ZbSendReportWrite(val_config, zcl); } else { Response_P(PSTR("Missing zigbee 'Send', 'Write', 'Report' or 'Response'")); return; } } // // Command `ZbBind` // void ZbBindUnbind(bool unbind) { // false = bind, true = unbind // ZbBind {"Device":"", "Endpoint":, "Cluster":, "ToDevice":"", "ToEndpoint":, "ToGroup": } // ZbUnbind {"Device":"", "Endpoint":, "Cluster":, "ToDevice":"", "ToEndpoint":, "ToGroup": } // local endpoint is always 1, IEEE addresses are calculated if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } JsonParser parser(XdrvMailbox.data); JsonParserObject root = parser.getRootObject(); if (!root) { ResponseCmndChar_P(PSTR(D_JSON_INVALID_JSON)); return; } // params uint16_t dstDevice = BAD_SHORTADDR; // BAD_SHORTADDR is broadcast, so considered invalid uint64_t dstLongAddr = 0; uint8_t endpoint = 0x00; // 0x00 is invalid for the src endpoint uint8_t toendpoint = 0x01; // default dest endpoint to 0x01 uint16_t toGroup = 0x0000; // group address uint16_t cluster = 0; // cluster 0 is default // Information about source device: "Device", "Endpoint", "Cluster" // - the source endpoint must have a known IEEE address const Z_Device & src_device = zigbee_devices.parseDeviceFromName(root.getStr(PSTR(D_CMND_ZIGBEE_DEVICE), nullptr)); if (!src_device.valid()) { ResponseCmndChar_P(PSTR("Unknown source device")); return; } // check if IEEE address is known uint64_t srcLongAddr = src_device.longaddr; if (0 == srcLongAddr) { ResponseCmndChar_P(PSTR("Unknown source IEEE address")); return; } // look for source endpoint endpoint = root.getUInt(PSTR(D_CMND_ZIGBEE_ENDPOINT), endpoint); if (0 == endpoint) { endpoint = zigbee_devices.findFirstEndpoint(src_device.shortaddr); } // look for source cluster JsonParserToken val_cluster = root[PSTR(D_CMND_ZIGBEE_CLUSTER)]; if (val_cluster) { cluster = val_cluster.getUInt(cluster); // first convert as number if (0 == cluster) { zigbeeFindAttributeByName(val_cluster.getStr(), &cluster, nullptr, nullptr); } } // Or Group Address - we don't need a dstEndpoint in this case JsonParserToken to_group = root[PSTR("ToGroup")]; if (to_group) { toGroup = to_group.getUInt(toGroup); } // Either Device address // In this case the following parameters are mandatory // - "ToDevice" and the device must have a known IEEE address // - "ToEndpoint" JsonParserToken dst_device = root[PSTR("ToDevice")]; // If no target is specified, we default to coordinator 0x0000 if ((!to_group) && (!dst_device)) { dstDevice = 0x0000; dstLongAddr = localIEEEAddr; toendpoint = 1; } if (dst_device) { const Z_Device & dstDevice = zigbee_devices.parseDeviceFromName(dst_device.getStr(nullptr)); if (!dstDevice.valid()) { ResponseCmndChar_P(PSTR("Unknown dest device")); return; } dstLongAddr = dstDevice.longaddr; } if (!to_group) { if (0 == dstLongAddr) { ResponseCmndChar_P(PSTR("Unknown dest IEEE address")); return; } toendpoint = root.getUInt(PSTR("ToEndpoint"), toendpoint); } // make sure we don't have conflicting parameters if (to_group && dst_device) { ResponseCmndChar_P(PSTR("Cannot have both \"ToDevice\" and \"ToGroup\"")); return; } #ifdef USE_ZIGBEE_ZNP SBuffer buf(34); buf.add8(Z_SREQ | Z_ZDO); if (unbind) { buf.add8(ZDO_UNBIND_REQ); } else { buf.add8(ZDO_BIND_REQ); } buf.add16(src_device.shortaddr); buf.add64(srcLongAddr); buf.add8(endpoint); buf.add16(cluster); if (!to_group) { buf.add8(Z_Addr_IEEEAddress); // DstAddrMode - 0x03 = ADDRESS_64_BIT buf.add64(dstLongAddr); buf.add8(toendpoint); } else { buf.add8(Z_Addr_Group); // DstAddrMode - 0x01 = GROUP_ADDRESS buf.add16(toGroup); } ZigbeeZNPSend(buf.getBuffer(), buf.len()); #endif // USE_ZIGBEE_ZNP #ifdef USE_ZIGBEE_EZSP SBuffer buf(24); // ZDO message payload (see Zigbee spec 2.4.3.2.2) buf.add64(srcLongAddr); buf.add8(endpoint); buf.add16(cluster); if (!to_group) { buf.add8(Z_Addr_IEEEAddress); // DstAddrMode - 0x03 = ADDRESS_64_BIT buf.add64(dstLongAddr); buf.add8(toendpoint); } else { buf.add8(Z_Addr_Group); // DstAddrMode - 0x01 = GROUP_ADDRESS buf.add16(toGroup); } EZ_SendZDO(src_device.shortaddr, unbind ? ZDO_UNBIND_REQ : ZDO_BIND_REQ, buf.buf(), buf.len()); #endif // USE_ZIGBEE_EZSP ResponseCmndDone(); } // // Command ZbBind // void CmndZbBind(void) { ZbBindUnbind(false); } // // Command ZbBind // void CmndZbUnbind(void) { ZbBindUnbind(true); } // // ZbLeave - ask for a device to leave the network // void CmndZbLeave(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } uint16_t shortaddr = zigbee_devices.parseDeviceFromName(XdrvMailbox.data).shortaddr; if (BAD_SHORTADDR == shortaddr) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } #ifdef USE_ZIGBEE_ZNP SBuffer buf(14); buf.add8(Z_SREQ | Z_ZDO); // 25 buf.add8(ZDO_MGMT_LEAVE_REQ); // 34 buf.add16(shortaddr); // shortaddr buf.add64(0); // remove self buf.add8(0x00); // don't rejoin and don't remove children ZigbeeZNPSend(buf.getBuffer(), buf.len()); #endif // USE_ZIGBEE_ZNP #ifdef USE_ZIGBEE_EZSP // ZDO message payload (see Zigbee spec 2.4.3.3.4) SBuffer buf(10); buf.add64(0); // remove self buf.add8(0x00); // don't rejoin and don't remove children EZ_SendZDO(shortaddr, ZDO_MGMT_LEAVE_REQ, buf.getBuffer(), buf.len()); #endif // USE_ZIGBEE_EZSP ResponseCmndDone(); } void CmndZbBindState_or_Map(bool map) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } uint16_t parsed_shortaddr;; uint16_t shortaddr = zigbee_devices.parseDeviceFromName(XdrvMailbox.data, &parsed_shortaddr).shortaddr; if (BAD_SHORTADDR == shortaddr) { if ((map) && (parsed_shortaddr != shortaddr)) { shortaddr = parsed_shortaddr; // allow a non-existent address when ZbMap } else { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } } uint8_t index = XdrvMailbox.index - 1; // change default 1 to 0 uint16_t zdo_cmd; #ifdef USE_ZIGBEE_ZNP zdo_cmd = map ? ZDO_MGMT_LQI_REQ : ZDO_MGMT_BIND_REQ; #endif // USE_ZIGBEE_ZNP #ifdef USE_ZIGBEE_EZSP zdo_cmd = map ? ZDO_Mgmt_Lqi_req : ZDO_Mgmt_Bind_req; #endif // USE_ZIGBEE_EZSP Z_Send_State_or_Map(shortaddr, index, zdo_cmd); ResponseCmndDone(); } // // Command `ZbBindState` // `ZbBindState` as index if it does not fit. If default, `1` starts at the beginning // void CmndZbBindState(void) { CmndZbBindState_or_Map(false); } void ZigbeeMapAllDevices(void) { // we can't abort a mapping in progress if (zigbee.mapping_in_progress) { return; } // defer sending ZbMap to each device zigbee_mapper.reset(); // clear all data in Zigbee mapper const static uint32_t DELAY_ZBMAP = 2000; // wait for 1s between commands uint32_t wait_ms = DELAY_ZBMAP; zigbee.mapping_in_progress = true; // mark mapping in progress zigbee_devices.setTimer(0x0000, 0, 0 /*wait_ms*/, 0, 0, Z_CAT_ALWAYS, 0 /* value = index */, &Z_Map); for (const auto & device : zigbee_devices.getDevices()) { zigbee_devices.setTimer(device.shortaddr, 0, wait_ms, 0, 0, Z_CAT_ALWAYS, 0 /* value = index */, &Z_Map); wait_ms += DELAY_ZBMAP; } wait_ms += DELAY_ZBMAP*2; zigbee_devices.setTimer(BAD_SHORTADDR, 0, wait_ms, 0, 0, Z_CAT_ALWAYS, 0 /* value = index */, &Z_Map); zigbee.mapping_end_time = wait_ms + millis(); } // // Command `ZbMap` // `ZbMap` as index if it does not fit. If default, `1` starts at the beginning // void CmndZbMap(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } RemoveSpace(XdrvMailbox.data); if (strlen(XdrvMailbox.data) == 0) { ZigbeeMapAllDevices(); ResponseCmndDone(); } else { CmndZbBindState_or_Map(true); } } // Probe a specific device to get its endpoints and supported clusters void CmndZbProbe(void) { CmndZbProbeOrPing(true); } // // Common code for `ZbProbe` and `ZbPing` // void CmndZbProbeOrPing(boolean probe) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } uint16_t shortaddr = zigbee_devices.parseDeviceFromName(XdrvMailbox.data).shortaddr; if (BAD_SHORTADDR == shortaddr) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } // set a timer for Reachable - 2s default value zigbee_devices.setTimer(shortaddr, 0, Z_CAT_REACHABILITY_TIMEOUT, 0, 0, Z_CAT_REACHABILITY, 0 /* value */, &Z_Unreachable); // everything is good, we can send the command Z_SendIEEEAddrReq(shortaddr); if (probe) { Z_SendActiveEpReq(shortaddr); } ResponseCmndDone(); } // Ping a device, actually a simplified version of ZbProbe void CmndZbPing(void) { CmndZbProbeOrPing(false); } // // Command `ZbName` // Specify, read or erase a Friendly Name // void CmndZbName(void) { // Syntax is: // ZbName , - assign a friendly name // ZbName - display the current friendly name // ZbName , - remove friendly name // // Where can be: short_addr, long_addr, device_index, friendly_name if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } // check if parameters contain a comma ',' char *p; strtok_r(XdrvMailbox.data, ",", &p); // parse first part, Z_Device & device = zigbee_devices.parseDeviceFromName(XdrvMailbox.data); // it's the only case where we create a new device if (!device.valid()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } if (p == nullptr) { const char * friendlyName = device.friendlyName; Response_P(PSTR("{\"0x%04X\":{\"" D_JSON_ZIGBEE_NAME "\":\"%s\"}}"), device.shortaddr, friendlyName ? friendlyName : ""); } else { if (strlen(p) > 32) { p[32] = 0x00; } // truncate to 32 chars max device.setFriendlyName(p); Response_P(PSTR("{\"0x%04X\":{\"" D_JSON_ZIGBEE_NAME "\":\"%s\"}}"), device.shortaddr, p); } } // // Command `ZbName` // Specify, read or erase a ModelId, only for debug purposes // void CmndZbModelId(void) { // Syntax is: // ZbName , - assign a friendly name // ZbName - display the current friendly name // ZbName , - remove friendly name // // Where can be: short_addr, long_addr, device_index, friendly_name if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } // check if parameters contain a comma ',' char *p; strtok_r(XdrvMailbox.data, ",", &p); // parse first part, Z_Device & device = zigbee_devices.parseDeviceFromName(XdrvMailbox.data); // in case of short_addr, it must be already registered if (!device.valid()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } if (p != nullptr) { device.setModelId(p); } const char * modelId = device.modelId; Response_P(PSTR("{\"0x%04X\":{\"" D_JSON_ZIGBEE_MODELID "\":\"%s\"}}"), device.shortaddr, modelId ? modelId : ""); } // // Command `ZbLight` // Specify, read or erase a Light type for Hue/Alexa integration void CmndZbLight(void) { // Syntax is: // ZbLight , - assign a bulb type 0-5 // ZbLight - display the current bulb type and status // // Where can be: short_addr, long_addr, device_index, friendly_name if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } // check if parameters contain a comma ',' char *p; strtok_r(XdrvMailbox.data, ", ", &p); // parse first part, Z_Device & device = zigbee_devices.parseDeviceFromName(XdrvMailbox.data); // in case of short_addr, it must be already registered if (!device.valid()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } if (p) { int8_t bulbtype = strtol(p, nullptr, 10); if (bulbtype > 5) { bulbtype = 5; } if (bulbtype < -1) { bulbtype = -1; } device.setLightChannels(bulbtype); } Z_attribute_list attr_list; device.jsonLightState(attr_list); device.jsonPublishAttrList(PSTR(D_PRFX_ZB D_CMND_ZIGBEE_LIGHT), attr_list); // publish as ZbReceived ResponseCmndDone(); } // // Command `ZbOccupancy` // Specify, read or erase the Occupancy detector configuration void CmndZbOccupancy(void) { // Syntax is: // ZbOccupancy , - set the occupancy time-out // ZbOccupancy - display the configuration // // List of occupancy time-outs: // 0xF = default (90 s) // 0x0 = no time-out // 0x1 = 15 s // 0x2 = 30 s // 0x3 = 45 s // 0x4 = 60 s // 0x5 = 75 s // 0x6 = 90 s -- default // 0x7 = 105 s // 0x8 = 120 s // Where can be: short_addr, long_addr, device_index, friendly_name if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } // check if parameters contain a comma ',' char *p; strtok_r(XdrvMailbox.data, ", ", &p); // parse first part, Z_Device & device = zigbee_devices.parseDeviceFromName(XdrvMailbox.data); // in case of short_addr, it must be already registered if (!device.valid()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } int8_t occupancy_time = -1; if (p) { Z_Data_PIR & pir = (Z_Data_PIR&) device.data.getByType(Z_Data_Type::Z_PIR); occupancy_time = strtol(p, nullptr, 10); pir.setTimeoutSeconds(occupancy_time); zigbee_devices.dirty(); } else { const Z_Data_PIR & pir_found = (const Z_Data_PIR&) device.data.find(Z_Data_Type::Z_PIR); if (&pir_found != nullptr) { occupancy_time = pir_found.getTimeoutSeconds(); } } Response_P(PSTR("{\"" D_PRFX_ZB D_CMND_ZIGBEE_OCCUPANCY "\":%d}"), occupancy_time); MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, PSTR(D_PRFX_ZB D_CMND_ZIGBEE_LIGHT)); ResponseCmndDone(); } // // Command `ZbForget` // Remove an old Zigbee device from the list of known devices, use ZigbeeStatus to know all registered devices // void CmndZbForget(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } Z_Device & device = zigbee_devices.parseDeviceFromName(XdrvMailbox.data); // in case of short_addr, it must be already registered if (!device.valid()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } // everything is good, we can send the command if (zigbee_devices.removeDevice(device.shortaddr)) { ResponseCmndDone(); } else { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); } } // // Command `ZbInfo` // Display all information known about a device, this equivalent to `2bStatus3` with a simpler JSON output // void CmndZbInfo_inner(const Z_Device & device) { Z_attribute_list attr_list; device.jsonDumpSingleDevice(attr_list, 3, false); // don't add Device/Name device.jsonPublishAttrList(PSTR(D_JSON_ZIGBEE_INFO), attr_list); // publish as ZbReceived } void CmndZbInfo(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } RemoveSpace(XdrvMailbox.data); if (strlen(XdrvMailbox.data) == 0) { // if empty, dump for all values for (const auto & device : zigbee_devices.getDevices()) { CmndZbInfo_inner(device); } } else { // try JSON Z_Device & device = zigbee_devices.parseDeviceFromName(XdrvMailbox.data); // in case of short_addr, it must be already registered if (!device.valid()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } // everything is good, we can send the command Z_attribute_list attr_list; device.jsonDumpSingleDevice(attr_list, 3, false); // don't add Device/Name device.jsonPublishAttrList(PSTR(D_JSON_ZIGBEE_INFO), attr_list); // publish as ZbReceived } ResponseCmndDone(); } // // Command `ZbSave` // Save Zigbee information to flash // void CmndZbSave(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } switch (XdrvMailbox.payload) { case 2: // save only data hibernateAllData(); break; case -1: // dump configuration loadZigbeeDevices(true); // dump only break; case -2: hydrateDevicesDataFromEEPROM(); break; #ifdef Z_EEPROM_DEBUG case -10: { // reinit EEPROM ZFS::erase(); } break; #endif default: saveZigbeeDevices(); break; } ResponseCmndDone(); } // // Command `ZbScan` // Run an energy scan // void CmndZbScan(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } for (uint32_t i = 0; i < USE_ZIGBEE_CHANNEL_COUNT; i++) { zigbee.energy[i] = -0x80; } #ifdef USE_ZIGBEE_ZNP ResponseCmndChar_P(PSTR("Unsupported command on ZNP")); return; #endif // USE_ZIGBEE_ZNP #ifdef USE_ZIGBEE_EZSP SBuffer buf(8); buf.add16(EZSP_startScan); buf.add8(0x00); // EZSP_ENERGY_SCAN buf.add32(0x07FFF800); // standard channels 11-26 buf.add8(0x04); // duration 2 ^ 4 ZigbeeEZSPSendCmd(buf.getBuffer(), buf.len()); #endif // USE_ZIGBEE_EZSP ResponseCmndDone(); } // Restore a device configuration previously exported via `ZbStatus2`` // Format: // Either the entire `ZbStatus3` export, or an array or just the device configuration. // If array, if can contain multiple devices // ZbRestore {"ZbStatus3":[{"Device":"0x5ADF","Name":"Petite_Lampe","IEEEAddr":"0x90FD9FFFFE03B051","ModelId":"TRADFRI bulb E27 WS opal 980lm","Manufacturer":"IKEA of Sweden","Endpoints":["0x01","0xF2"]}]} // ZbRestore [{"Device":"0x5ADF","Name":"Petite_Lampe","IEEEAddr":"0x90FD9FFFFE03B051","ModelId":"TRADFRI bulb E27 WS opal 980lm","Manufacturer":"IKEA of Sweden","Endpoints":["0x01","0xF2"]}] // ZbRestore {"Device":"0x5ADF","Name":"Petite_Lampe","IEEEAddr":"0x90FD9FFFFE03B051","ModelId":"TRADFRI bulb E27 WS opal 980lm","Manufacturer":"IKEA of Sweden","Endpoints":["0x01","0xF2"]} void CmndZbRestore(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } RemoveSpace(XdrvMailbox.data); if (strlen(XdrvMailbox.data) == 0) { // if empty, log values for all devices restoreDumpAllDevices(); } else if (XdrvMailbox.data[0] == '{') { // try JSON JsonParser parser(XdrvMailbox.data); JsonParserToken root = parser.getRoot(); if (!parser || !(root.isObject() || root.isArray())) { ResponseCmndChar_P(PSTR(D_JSON_INVALID_JSON)); return; } // Check is root contains `ZbStatus` key, if so change the root JsonParserToken zbstatus = root.getObject().findStartsWith(PSTR("ZbStatus")); if (zbstatus) { root = zbstatus; } // check if the root is an array if (root.isArray()) { JsonParserArray arr = JsonParserArray(root); for (const auto elt : arr) { // call restore on each item if (elt.isObject()) { int32_t res = zigbee_devices.deviceRestore(JsonParserObject(elt)); if (res < 0) { ResponseCmndChar_P(PSTR("Restore failed")); return; } } } } else if (root.isObject()) { int32_t res = zigbee_devices.deviceRestore(JsonParserObject(root)); if (res < 0) { ResponseCmndChar_P(PSTR("Restore failed")); return; } // call restore on a single object } else { ResponseCmndChar_P(PSTR(D_ZIGBEE_MISSING_PARAM)); return; } } else { // try hex SBuffer buf = SBuffer::SBufferFromHex(XdrvMailbox.data, strlen(XdrvMailbox.data)); // do a sanity check, the first byte must equal the length of the buffer if (buf.get8(0) == buf.len()) { // good, we can hydrate hydrateSingleDevice(buf); } else { ResponseCmndChar_P(PSTR("Restore failed")); return; } } ResponseCmndDone(); } // // Command `ZbPermitJoin` // Allow or Deny pairing of new Zigbee devices // void CmndZbPermitJoin(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } uint32_t payload = XdrvMailbox.payload; uint8_t duration = 60; // default 60s if (payload <= 0) { duration = 0; } if (99 == payload) { if (zigbee.zb3) { ResponseCmndChar_P(PSTR("Unlimited time not supported")); return; } duration = 0xFF; // unlimited time } // ZNP Version #ifdef USE_ZIGBEE_ZNP SBuffer buf(34); buf.add8(Z_SREQ | Z_ZDO); // 25 buf.add8(ZDO_MGMT_PERMIT_JOIN_REQ); // 36 buf.add8(0x0F); // AddrMode buf.add16(0xFFFC); // DstAddr buf.add8(duration); buf.add8(0x00); // TCSignificance ZigbeeZNPSend(buf.getBuffer(), buf.len()); #endif // USE_ZIGBEE_ZNP // EZSP VERSION #ifdef USE_ZIGBEE_EZSP SBuffer buf(3); buf.add16(EZSP_permitJoining); buf.add8(duration); ZigbeeEZSPSendCmd(buf.getBuffer(), buf.len()); // send ZDO_Mgmt_Permit_Joining_req to all routers buf.setLen(0); buf.add8(duration); buf.add8(0x01); // TC_Significance - This field shall always have a value of 1, indicating a request to change the Trust Center policy. If a frame is received with a value of 0, it shall be treated as having a value of 1. EZ_SendZDO(0xFFFC, ZDO_Mgmt_Permit_Joining_req, buf.buf(), buf.len()); #endif // USE_ZIGBEE_EZSP // Set Timer after the end of the period, and reset a non-expired previous timer if (zigbee.zb3) { if (duration > 0) { // Log pairing mode enabled Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{\"Status\":21,\"Message\":\"Pairing mode enabled\"}}")); MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE)); zigbee.permit_end_time = millis() + duration * 1000; } else { zigbee.permit_end_time = millis(); } if (0 == zigbee.permit_end_time) { zigbee.permit_end_time = 1; } // avoid very rare case where timer collides with timestamp equals to zero } ResponseCmndDone(); } #ifdef USE_ZIGBEE_EZSP // // `ZbListen`: add a multicast group to listen to // Overcomes a current limitation that EZSP only shows messages from multicast groups it listens too // // Ex: `ZbListen 99`, `ZbListen2 100` void CmndZbEZSPListen(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } int32_t index = XdrvMailbox.index; // 0 is reserved for group 0 (auto-config) int32_t group = XdrvMailbox.payload; if (group <= 0) { group = 0; } else if (group > 0xFFFF) { group = 0xFFFF; } SBuffer buf(8); buf.add16(EZSP_setMulticastTableEntry); buf.add8(index); buf.add16(group); // group buf.add8(0x01); // endpoint buf.add8(0x00); // network index ZigbeeEZSPSendCmd(buf.getBuffer(), buf.len()); ResponseCmndDone(); } void ZigbeeGlowPermitJoinLight(void) { static const uint16_t cycle_time = 1000; // cycle up and down in 1000 ms static const uint16_t half_cycle_time = cycle_time / 2; // cycle up and down in 1000 ms uint16_t led_power = 0; // turn led off if (zigbee.permit_end_time) { uint32_t millis_to_go = millis() - zigbee.permit_end_time; uint32_t sub_second = millis_to_go % cycle_time; if (sub_second <= half_cycle_time) { led_power = changeUIntScale(sub_second, 0, half_cycle_time, 0, 1023); } else { led_power = changeUIntScale(sub_second, half_cycle_time, cycle_time, 1023, 0); } led_power = ledGamma10_10(led_power); } // change the led state int led_pin = Pin(GPIO_LEDLNK); if (led_pin >= 0) { analogWrite(led_pin, TasmotaGlobal.ledlnk_inverted ? 1023 - led_power : led_power); } } #endif // USE_ZIGBEE_EZSP // check if the permitjoin timer has expired void ZigbeePermitJoinUpdate(void) { if (zigbee.zb3 && zigbee.permit_end_time) { // permit join is ongoing if (TimeReached(zigbee.permit_end_time)) { zigbee.permit_end_time = 0; // disable timer Z_PermitJoinDisable(); } #ifdef USE_ZIGBEE_EZSP ZigbeeGlowPermitJoinLight(); // update glowing light accordingly #endif // USE_ZIGBEE_EZSP } } // // Command `ZbStatus` // void CmndZbStatus(void) { if (ZigbeeSerial) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } String dump; if (0 == XdrvMailbox.index) { dump = zigbee_devices.dumpCoordinator(); } else { Z_Device & device = zigbee_devices.parseDeviceFromName(XdrvMailbox.data); if (XdrvMailbox.data_len > 0) { if (!device.valid()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } dump = zigbee_devices.dumpDevice(XdrvMailbox.index, device); } else { if (XdrvMailbox.index >= 2) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } dump = zigbee_devices.dumpDevice(XdrvMailbox.index, *(Z_Device*)nullptr); } } Response_P(PSTR("{\"%s%d\":%s}"), XdrvMailbox.command, XdrvMailbox.index, dump.c_str()); } } // // Command `ZbData` // void CmndZbData(void) { if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } RemoveSpace(XdrvMailbox.data); if (strlen(XdrvMailbox.data) == 0) { // if empty, log values for all devices for (const auto & device : zigbee_devices.getDevices()) { hibernateDeviceData(device, true); // simple log, no mqtt } } else { // check if parameters contain a comma ',' char *p; strtok_r(XdrvMailbox.data, ",", &p); // parse first part, Z_Device & device = zigbee_devices.parseDeviceFromName(XdrvMailbox.data); // in case of short_addr, it must be already registered if (!device.valid()) { ResponseCmndChar_P(PSTR(D_ZIGBEE_UNKNOWN_DEVICE)); return; } if (p) { // set ZbData const SBuffer buf = SBuffer::SBufferFromHex(p, strlen(p)); hydrateDeviceData(device, buf, 0, buf.len()); } else { // non-JSON, export current data // ZbData 0x1234 // ZbData Device_Name hibernateDeviceData(device, true); // mqtt } } ResponseCmndDone(); } // // Command `ZbConfig` // void CmndZbConfig(void) { // ZbConfig // ZbConfig {"Channel":11,"PanID":"0x1A63","ExtPanID":"0xCCCCCCCCCCCCCCCC","KeyL":"0x0F0D0B0907050301L","KeyH":"0x0D0C0A0806040200L"} uint8_t zb_channel = Settings.zb_channel; uint16_t zb_pan_id = Settings.zb_pan_id; uint64_t zb_ext_panid = Settings.zb_ext_panid; uint64_t zb_precfgkey_l = Settings.zb_precfgkey_l; uint64_t zb_precfgkey_h = Settings.zb_precfgkey_h; int8_t zb_txradio_dbm = Settings.zb_txradio_dbm; // if (zigbee.init_phase) { ResponseCmndChar_P(PSTR(D_ZIGBEE_NOT_STARTED)); return; } RemoveSpace(XdrvMailbox.data); if (strlen(XdrvMailbox.data) > 0) { JsonParser parser(XdrvMailbox.data); JsonParserObject root = parser.getRootObject(); if (!root) { ResponseCmndChar_P(PSTR(D_JSON_INVALID_JSON)); return; } // Channel zb_channel = root.getUInt(PSTR("Channel"), zb_channel); zb_pan_id = root.getUInt(PSTR("PanID"), zb_pan_id); zb_ext_panid = root.getULong(PSTR("ExtPanID"), zb_ext_panid); zb_precfgkey_l = root.getULong(PSTR("KeyL"), zb_precfgkey_l); zb_precfgkey_h = root.getULong(PSTR("KeyH"), zb_precfgkey_h); zb_txradio_dbm = root.getInt(PSTR("TxRadio"), zb_txradio_dbm); if (zb_channel < 11) { zb_channel = 11; } if (zb_channel > 26) { zb_channel = 26; } // if network key is zero, we generate a truly random key with a hardware generator from ESP if ((0 == zb_precfgkey_l) && (0 == zb_precfgkey_h)) { AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE D_ZIGBEE_GENERATE_KEY)); zb_precfgkey_l = (uint64_t)HwRandom() << 32 | HwRandom(); zb_precfgkey_h = (uint64_t)HwRandom() << 32 | HwRandom(); } // Check if a parameter was changed after all if ( (zb_channel != Settings.zb_channel) || (zb_pan_id != Settings.zb_pan_id) || (zb_ext_panid != Settings.zb_ext_panid) || (zb_precfgkey_l != Settings.zb_precfgkey_l) || (zb_precfgkey_h != Settings.zb_precfgkey_h) || (zb_txradio_dbm != Settings.zb_txradio_dbm) ) { Settings.zb_channel = zb_channel; Settings.zb_pan_id = zb_pan_id; Settings.zb_ext_panid = zb_ext_panid; Settings.zb_precfgkey_l = zb_precfgkey_l; Settings.zb_precfgkey_h = zb_precfgkey_h; Settings.zb_txradio_dbm = zb_txradio_dbm; TasmotaGlobal.restart_flag = 2; // save and reboot } } // display the current or new configuration // {"ZbConfig":{"Channel":11,"PanID":"0x1A63","ExtPanID":"0xCCCCCCCCCCCCCCCC","KeyL":"0x0F0D0B0907050301L","KeyH":"0x0D0C0A0806040200L"}} Response_P(PSTR("{\"" D_PRFX_ZB D_JSON_ZIGBEE_CONFIG "\":{" "\"Channel\":%d" ",\"PanID\":\"0x%04X\"" ",\"ExtPanID\":\"0x%_X\"" ",\"KeyL\":\"0x%_X\"" ",\"KeyH\":\"0x%_X\"" ",\"TxRadio\":%d" "}}"), zb_channel, zb_pan_id, &zb_ext_panid, &zb_precfgkey_l, &zb_precfgkey_h, zb_txradio_dbm); } /*********************************************************************************************\ * Presentation \*********************************************************************************************/ const char ZB_WEB_U[] PROGMEM = // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ // index 0 //=ZB_WEB_CSS "{t}" // Terminate current two column table and open new table "" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ // index 1 // Visual indicator for PermitJoin Active //=ZB_WEB_PERMITJOIN_ACTIVE "

[ %s ]

" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ // index 2 // Start of vis.js box //=ZB_WEB_VIS_JS_BEFORE "" "
Unable to load vis.js
" "" // "

" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ // index 4 // Auto-refresh //=ZB_WEB_AUTO_REFRESH "" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ // index 5 // Auto-refresh //=ZB_WEB_MAP_REFRESH "

" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ // index 6 // Style //=ZB_WEB_STATUS_LINE "" "%s" // name "%s" // sbatt (Battery Indicator) "
" // slqi "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ //=ZB_WEB_BATTERY "" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ //=ZB_WEB_LAST_SEEN "🕗%02d%c" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ //=ZB_WEB_COLOR_RGB " #%02X%02X%02X" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ //=ZB_WEB_LINE_START "┆" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ //=ZB_WEB_LIGHT_CT " ⚪ %dK" "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ //=ZB_WEB_END_STATUS "
" // Close LQI "%s{e}" // dhm (Last Seen) "\0" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++ //=ZB_WEB_LINE_END "{t}

" "\0" ; // end of list // Use the tool at https://tasmota.hadinger.fr/util and choose "Compress Strings template with Unishox" // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ // ++++++++++++++++++++ DO NOT EDIT BELOW ++++++++++++++++++++ // ++++++++++++++++++++vvvvvvvvvvvvvvvvvvv++++++++++++++++++++ enum { ZB_WEB_CSS=0, ZB_WEB_PERMITJOIN_ACTIVE=507, ZB_WEB_VIS_JS_BEFORE=561, ZB_WEB_VIS_JS_AFTER=1034, ZB_WEB_AUTO_REFRESH=1098, ZB_WEB_MAP_REFRESH=1164, ZB_WEB_STATUS_LINE=1230, ZB_WEB_BATTERY=1338, ZB_WEB_LAST_SEEN=1388, ZB_WEB_COLOR_RGB=1436, ZB_WEB_LINE_START=1496, ZB_WEB_LIGHT_CT=1536, ZB_WEB_END_STATUS=1591, ZB_WEB_LINE_END=1608, }; // Compressed from 1627 to 1118, -31.3% const char ZB_WEB[] PROGMEM = "\x00\x66\x3D\x0E\xCA\xB1\xC1\x33\xF0\xF6\xD1\xEE\x3D\x3D\x46\x41\x33\xF0\xE8\x6D" "\xA1\x15\x08\x79\xF6\x51\xDD\x3C\xCC\x6F\xFD\x47\x58\x62\xB4\x21\x0E\xF1\xED\x1F" "\xD1\x28\x51\xE6\x72\x99\x0C\x36\x1E\x0C\x67\x51\xD7\xED\x36\xB3\xCC\xE7\x99\xF4" "\x7D\x1E\xE2\x04\x3C\x40\x2B\x04\x3C\x28\x10\xB0\x93\x99\xA4\x30\xD8\x08\x36\x8E" "\x83\xA8\xF6\x8D\xBF\x8F\x6F\x1D\x7F\xD1\xE1\x54\x79\x9C\x8C\x86\x1B\x0F\x07\xB8" "\xE8\x2A\x2B\xBE\x7B\x42\xDE\x67\x58\xA7\xA3\xC2\xA8\xF3\x39\x4C\x86\x1B\x0F\x71" "\xD0\x71\xB0\xF6\x82\x14\xC3\x93\x08\x61\xB0\xF0\x08\x39\x49\xC9\x84\x30\xD8\x78" "\x13\x7C\x30\x2B\x32\x3C\xF7\x82\xDE\x67\x58\xE0\xB0\x33\x43\xC0\xEC\xF8\x8F\xE7" "\x99\xC8\x43\x0D\x8B\xD8\x16\x88\x83\x17\xFF\xBE\xA2\x0F\x02\xCF\x9E\x07\x58\x66" "\x83\xDF\xC1\x7C\x21\xD6\x1E\x05\x9F\x3C\xCC\xEF\xE7\x74\xEB\x3A\xC3\x08\xEA\x3C" "\x8C\x18\x30\x77\x8F\x71\xD3\xDA\x7B\x41\x2B\x33\x30\x13\x36\x1E\x2C\x2D\x1E\xE3" "\xAF\x69\x8D\xF1\xE6\x60\x26\x6C\x3A\xDF\x08\x78\x04\x3D\xCC\xE6\x90\xC3\x61\xE0" "\x65\x88\x26\xF0\xF1\xE6\x71\x9E\xE3\xA1\x7B\x56\x82\x17\x0A\x07\x2C\x86\x1B\x0F" "\x2A\x01\x93\xC2\x30\xC3\x60\x21\x6F\xC7\x5F\xEC\x4D\x17\xE3\xCC\xE5\x90\xC3\x60" "\x26\xEE\x47\x91\xF4\x71\xF1\x1B\x0F\x71\xD3\xDA\x8E\x83\x8E\x32\x04\x3E\x16\xCE" "\x56\x9F\x47\xD1\x02\x15\x03\x90\x81\x0E\x81\xCD\x64\x08\x94\x0E\x51\x02\x1D\x03" "\x9E\x20\x45\xC1\x0E\x59\x02\x27\x12\xE7\x1B\x3E\x8F\xA3\xDC\x74\x2C\x39\x6C\xF6" "\x96\x0C\xB0\xF6\x8C\x8F\x33\xA1\xCB\x3D\xC7\xA1\xD8\x40\x83\xCA\x24\xE1\x7C\xF4" "\x18\x7E\x1E\x83\x8F\xC3\xDE\x47\xA7\x86\x5F\x2F\x51\x90\x4C\xF8\x7D\x82\x16\xCE" "\x71\xFD\x9E\x0F\xB3\xF0\xFA\x2F\x1E\x87\x67\x86\x5F\x1F\x88\xF7\xCF\x43\xB0\x71" "\xF8\x7A\x1D\x83\x0F\xC9\xC2\xF9\xE9\xE0\xFF\xA3\x29\x51\x90\xC6\x7C\x3D\x94\xCD" "\x94\x76\x1A\xEC\xCE\xC1\x06\x91\xEC\x5E\xF8\x67\xC3\xD8\x2A\x2B\xA8\x67\x8F\x33" "\xB0\xEC\x17\xC3\x0D\x07\x8E\x81\xE0\xD3\xB0\xCF\x7C\x75\xF3\xA1\xFC\xF9\xA1\xD9" "\xEA\xBE\x12\xC2\xCE\x67\x60\xB1\xA2\x02\x3D\x73\xA0\xDD\xE3\xA1\xAF\xC7\xB0\xFC" "\x3D\x0E\xC0\x41\xCB\x0F\xC3\xD0\x4D\x33\x5A\x21\xF0\xF6\x0D\x32\x04\x2C\x2A\x01" "\xF6\x02\x17\x2A\x01\xC7\xB0\x13\x78\x9C\x30\x60\xC1\xE0\x10\xF8\x1C\x38\xD9\x02" "\x17\x32\x27\x3E\xD9\x0C\x36\x02\x1F\x22\x47\x31\xB2\x04\x4E\x3A\x01\x1B\x98\xA0" "\xB4\x78\x55\x0F\x7E\xCC\x8F\x1F\x7E\xD3\x6B\x3C\xC7\x65\x0A\x3C\x1E\xC3\xF0\x85" "\xF5\x8E\x09\xAA\xC4\x16\x58\x88\xCF\x7C\x74\x35\xF8\xF4\x3B\x04\xD3\x33\xF0\x16" "\x78\x63\x3F\x0C\xEF\xE8\x3C\xEA\xBD\xE7\xF3\xE0\x98\x18\xB1\xAF\xA8\xE8\x3C\xE8" "\x98\x4C\x6B\xEA\x21\xC6\x45\xA2\x1D\xD0\x46\xE0\xC8\xEF\x1E\x0C\xEF\xEB\x06\x56" "\xE7\x78\xF8\x7B\x47\xBF\x82\xC6\x78\xF3\x3D\xB8\x79\x9E\xDF\x0A\xB1\x8C\xF3\x3D" "\x81\xEF\xC3\x09\x9E\xC3\xA8\x10\x78\x3D\x3D\x87\x90\x87\x37\x4F\x61\xEE\x3A\x8B" "\xE0\x89\x70\x76\x1B\x01\x16\xC9\x81\xC7\x3C\x7B\x0F\x71\xD4\x4C\x11\x2C\xB0\x82" "\xD1\x9E\x04\x6C\x6A\xC4\x30\x7B\x0F\x71\xEE\x3D\xC7\x83\x3B\xFA\x12\xEA\xCF\x87" "\xB6\x70\xBE\x08\x32\x41\x0B\x6C\x3E\x73\x1F\x46\x7B\xE3\xA1\x70\x20\xCC\x3B\xA0" "\x89\xC1\x49\xD4\x25\xD5\x9D\x40\x85\xC0\x29\xDE\x3C\x02\x27\x20\xC0\x87\xCB\xA9" "\xF9\xE7\x45\x5A\x35\xE0\xBA\x3B\xA6\x05\xF0\x75\xB9\xC7\x74\xEF\x1E\xD0\xB0\x3B" "\xAD\xCE\x3A\x7D\x85\x96\x21\xDD\x3B\xC7\x83\xDC\x75\x1C\x89\x32\x04\x8C\x78\x61" "\xF8\x7A\x1D\x83\x0F\xC3\xD0\xC6\x7C\x6A\xB0\xEB\x73\x8F\x87\xD9\xB4\x77\xCF\xB4" "\x35\xD0\xAC\x10\xF8\x7D\x8F\x3A\x3E\xCF\xC3\xD0\x70\xBA\xAC\xE3\xF0\xFA\xF1\xE8" "\x76\x02\x14\x73\xD0\xEC\x31\x9F\x1A\x7E\x4E\x17\xCF\x4A\xFA\x0C\x2B\xF7\x8F\x87" "\xD9\xB6\x84\x42\xAB\xE7\xD9\xF8\x7A\x50\x87\xE1\xE8\x39\x56\xD0\x4C\xF8\x7D\x9C" "\x64\x6C\x3E\x8E\x3C\x22\x36\x23\xEB\xC8\xEB\x47\xD7\x81\x07\xA0\x7E\x38\xFC\x3D" "\x0E\xCA\x10\xFC\x3D\x28\x43\xF0\xFA\xF0\x22\x47\x3D\x04\xD3\x30\x43\xC4\x88\x22" "\x35\x16\xA3\xEB\xC7\xD8\x21\xE7\x1E\xD3\xEC\xFC\x9C\x2F\x9E\x9A\x08\x52\xCF\x60" "\xEA\x3D\x80\x85\x82\x9E\xC3\xE8\x43\xE8\xFA\x04\x4E\x7F\x8E\xB3\xAC\x70\x47\x99" "\xF4\x20\xC3\x61\xEC\x3F\x0F\x43\xB3\x4F\xC9\xC2\xF9\xE9\x42\x02\x1D\x70\x44\xE8" "\xA7\x1C\xA2\x36\x1F\x47\x1D\x11\xB0\xFA\x38\xE8\x8D\x87\xB0\xFC\x3F\x47\x91\xB0" "\xE4\x22\x30\x73\x77\xC7\x83\xE9\xD1\x08\x7D\x07\x38\x5F\x40\x8D\x9F\x9B\x01\x1B" "\x32\x0C\x23\xCC\xF2\x3E\x8E\x3A\x22\x36\x1F\x47\x1D\x11\x1B\x0F\xA3\x8E\x88\x8D" "\x80\x83\x9D\x82\x44\xF0\x47\xE1\x98\x10\xF8\x62\x41\xE0\x5E\x19\x7C\x7C\x3D\x87" "\x30\xF6\x1F\x87\xE8\xF2\x59\xEF\x9E\x0A\x70\xBE\x08\x5D\x15\xA0\x42\xE0\x6C\x83" "\x2A\x2B\x47\xD0\x87\xB0\xFC\x3D\x3C\x36\xC2\x08\xFC\x3F\x47\x91\xC5\xF5\xF3\xC1" "\xDC\x3D\x0E\xC2\x04\x19\x87\xD0\x84\x68\x08\x5D\x16\xC9\xC2\xF8\x21\x74\x18\x4E" "\xCA\x10\xFC\x3E\xBC\x7B\x59\xEE\x9C\x2F\x82\x3F\x4E\x90\x10\x79\x23\x9C\x2F\x9B"; // ++++++++++++++++++++^^^^^^^^^^^^^^^^^^^++++++++++++++++++++ // ++++++++++++++++++++ DO NOT EDIT ABOVE ++++++++++++++++++++ // +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ // comparator function used to sort Zigbee devices by alphabetical order (if friendlyname) // then by shortaddr if they don't have friendlyname int device_cmp(uint8_t a, uint8_t b) { const Z_Device &dev_a = zigbee_devices.devicesAt(a); const Z_Device &dev_b = zigbee_devices.devicesAt(b); const char * fn_a = dev_a.friendlyName; const char * fn_b = dev_b.friendlyName; if (fn_a && fn_b) { return strcasecmp(fn_a, fn_b); } else if (!fn_a && !fn_b) { return (int32_t)dev_a.shortaddr - (int32_t)dev_b.shortaddr; } else { if (fn_a) return -1; else return 1; } } // Convert seconds to a string representing days, hours or minutes present in the n-value. // The string will contain the most coarse time only, rounded down (61m == 01h, 01h37m == 01h). // Inputs: // - seconds: uint32_t representing some number of seconds // Outputs: // - char for unit (d for day, h for hour, m for minute) // - the hex color to be used to display the text // uint32_t convert_seconds_to_dhm(uint32_t seconds, char *unit, uint8_t *color){ static uint32_t conversions[3] = {24 * 3600, 3600, 60}; static char units[3] = { 'd', 'h', 'm'}; // day, hour, minute uint8_t color_text_8 = WebColor(COL_TEXT) & 0xFF; // color of text on 8 bits uint8_t color_back_8 = WebColor(COL_BACKGROUND) & 0xFF; // color of background on 8 bits uint8_t colors[3] = { (uint8_t) changeUIntScale(6, 0, 16, color_back_8, color_text_8), // 6/16 of text (uint8_t) changeUIntScale(10, 0, 16, color_back_8, color_text_8), // 10/16 of text color color_text_8}; for(int i = 0; i < 3; ++i) { *color = colors[i]; *unit = units[i]; if (seconds > conversions[i]) { // always pass even if 00m return seconds / conversions[i]; } } return 0; } const char HTTP_BTN_ZB_BUTTONS[] PROGMEM = "" "

" "
"; void ZigbeeShow(bool json) { if (json) { return; #ifdef USE_WEBSERVER } else { UnishoxStrings msg(ZB_WEB); uint32_t zigbee_num = zigbee_devices.devicesSize(); if (zigbee_num > 0) { if (zigbee_num > 255) { zigbee_num = 255; } WSContentSend_P(msg[ZB_WEB_CSS], WebColor(COL_TEXT)); // WSContentSend_compressed(ZB_WEB, 0); // sort elements by name, then by id uint8_t sorted_idx[zigbee_num]; for (uint32_t i = 0; i < zigbee_num; i++) { sorted_idx[i] = i; } // insertion sort for (uint32_t i = 1; i < zigbee_num; i++) { uint8_t key = sorted_idx[i]; uint8_t j = i; while ((j > 0) && (device_cmp(sorted_idx[j - 1], key) > 0)) { sorted_idx[j] = sorted_idx[j - 1]; j--; } sorted_idx[j] = key; } uint32_t now = Rtc.utc_time; for (uint32_t i = 0; i < zigbee_num; i++) { const Z_Device &device = zigbee_devices.devicesAt(sorted_idx[i]); uint16_t shortaddr = device.shortaddr; char *name = (char*) device.friendlyName; char sdevice[33]; if (nullptr == name) { snprintf_P(sdevice, sizeof(sdevice), PSTR(D_DEVICE " 0x%04X"), shortaddr); name = sdevice; } char sbatt[64]; snprintf_P(sbatt, sizeof(sbatt), PSTR(" ")); if (device.validBatteryPercent()) { snprintf_P(sbatt, sizeof(sbatt), msg[ZB_WEB_BATTERY], device.batterypercent, changeUIntScale(device.batterypercent, 0, 100, 0, 14) ); } uint32_t num_bars = 0; char slqi[4]; slqi[0] = '-'; slqi[1] = '\0'; if (device.validLqi()){ num_bars = changeUIntScale(device.lqi, 0, 254, 0, 4); snprintf_P(slqi, sizeof(slqi), PSTR("%d"), device.lqi); } WSContentSend_PD(msg[ZB_WEB_STATUS_LINE], shortaddr, device.modelId ? EscapeHTMLString(device.modelId).c_str() : "", device.manufacturerId ? EscapeHTMLString(device.manufacturerId).c_str() : "", EscapeHTMLString(name).c_str(), sbatt, slqi); if(device.validLqi()) { for(uint32_t j = 0; j < 4; ++j) { WSContentSend_PD(PSTR(""), j, (num_bars < j) ? PSTR(" o30") : PSTR("")); } } char dhm[48]; snprintf_P(dhm, sizeof(dhm), PSTR(" ")); if (device.validLastSeen()) { char unit; uint8_t color; uint16_t val = convert_seconds_to_dhm(now - device.last_seen, &unit, &color); if (val < 100) { snprintf_P(dhm, sizeof(dhm), msg[ZB_WEB_LAST_SEEN], color, color, color, val, unit); } } WSContentSend_PD(msg[ZB_WEB_END_STATUS], dhm ); // Sensors const Z_Data_Thermo & thermo = device.data.find(); if (&thermo != nullptr) { bool validTemp = thermo.validTemperature(); bool validTempTarget = thermo.validTempTarget(); bool validThSetpoint = thermo.validThSetpoint(); bool validHumidity = thermo.validHumidity(); bool validPressure = thermo.validPressure(); if (validTemp || validTempTarget || validThSetpoint || validHumidity || validPressure) { WSContentSend_P(msg[ZB_WEB_LINE_START]); if (validTemp) { char buf[12]; dtostrf(thermo.getTemperature() / 100.0f, 3, 1, buf); WSContentSend_PD(PSTR(" ☀️ %s°C"), buf); } if (validTempTarget) { char buf[12]; dtostrf(thermo.getTempTarget() / 100.0f, 3, 1, buf); WSContentSend_PD(PSTR(" 🎯 %s°C"), buf); } if (validThSetpoint) { WSContentSend_PD(PSTR(" ⚙️ %d%%"), thermo.getThSetpoint()); } if (validHumidity) { WSContentSend_P(PSTR(" 💧 %d%%"), (uint16_t)(thermo.getHumidity() / 100.0f + 0.5f)); } if (validPressure) { WSContentSend_P(PSTR(" ⛅ %d hPa"), thermo.getPressure()); } WSContentSend_P(PSTR("{e}")); } } // Light, switches and plugs const Z_Data_OnOff & onoff = device.data.find(); bool onoff_display = (&onoff != nullptr) ? onoff.validPower() : false; const Z_Data_Light & light = device.data.find(); bool light_display = (&light != nullptr) ? light.validDimmer() : false; const Z_Data_Plug & plug = device.data.find(); bool plug_voltage = (&plug != nullptr) ? plug.validMainsVoltage() : false; bool plug_power = (&plug != nullptr) ? plug.validMainsPower() : false; if (onoff_display || light_display || plug_voltage || plug_power) { int8_t channels = device.getLightChannels(); if (channels < 0) { channels = 5; } // if number of channel is unknown, display all known attributes WSContentSend_P(msg[ZB_WEB_LINE_START]); if (onoff_display) { WSContentSend_P(PSTR(" %s"), onoff.getPower() ? PSTR(D_ON) : PSTR(D_OFF)); } if (&light != nullptr) { if (light.validDimmer() && (channels >= 1)) { WSContentSend_P(PSTR(" 🔅 %d%%"), changeUIntScale(light.getDimmer(),0,254,0,100)); } if (light.validCT() && ((channels == 2) || (channels == 5))) { uint32_t ct_k = (((1000000 / light.getCT()) + 25) / 50) * 50; WSContentSend_P(msg[ZB_WEB_LIGHT_CT], light.getCT(), ct_k); } if (light.validHue() && light.validSat() && (channels >= 3)) { uint8_t r,g,b; uint8_t sat = changeUIntScale(light.getSat(), 0, 254, 0, 255); // scale to 0..255 HsToRgb(light.getHue(), sat, &r, &g, &b); WSContentSend_P(msg[ZB_WEB_COLOR_RGB], r,g,b,r,g,b); } else if (light.validX() && light.validY() && (channels >= 3)) { uint8_t r,g,b; XyToRgb(light.getX() / 65535.0f, light.getY() / 65535.0f, &r, &g, &b); WSContentSend_P(msg[ZB_WEB_COLOR_RGB], r,g,b,r,g,b); } } if (plug_voltage || plug_power) { WSContentSend_P(PSTR(" ⚡ ")); if (plug_voltage) { WSContentSend_P(PSTR(" %dV"), plug.getMainsVoltage()); } if (plug_power) { WSContentSend_P(PSTR(" %dW"), plug.getMainsPower()); } } WSContentSend_P(PSTR("{e}")); } } WSContentSend_P(msg[ZB_WEB_LINE_END]); // Terminate current multi column table and open new table } if (zigbee.permit_end_time) { // PermitJoin in progress WSContentSend_P(msg[ZB_WEB_PERMITJOIN_ACTIVE], PSTR(D_ZIGBEE_PERMITJOIN_ACTIVE)); } #endif } } // Web handler to refresh the map, the redirect to show map void ZigbeeMapRefresh(void) { if ((!zigbee.init_phase) && (!zigbee.mapping_in_progress)) { ZigbeeMapAllDevices(); } Webserver->sendHeader(F("Location"),F("/zbm")); // Add a header to respond with a new location for the browser to go to the home page again Webserver->send(302); } // Display a graphical representation of the Zigbee map using vis.js network void ZigbeeShowMap(void) { AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP "Zigbee Mapper")); // if no map, then launch a new mapping if ((!zigbee.init_phase) && (!zigbee.mapping_ready) && (!zigbee.mapping_in_progress)) { ZigbeeMapAllDevices(); } UnishoxStrings msg(ZB_WEB); WSContentStart_P(PSTR(D_ZIGBEE_MAPPING_TITLE)); WSContentSendStyle(); if (zigbee.init_phase) { WSContentSend_P(PSTR(D_ZIGBEE_NOT_STARTED)); } else if (zigbee.mapping_in_progress) { int32_t mapping_remaining = 1 + (zigbee.mapping_end_time - millis()) / 1000; if (mapping_remaining < 0) { mapping_remaining = 0; } WSContentSend_P(PSTR(D_ZIGBEE_MAPPING_IN_PROGRESS_SEC), mapping_remaining); WSContentSend_P(msg[ZB_WEB_AUTO_REFRESH]); } else if (!zigbee.mapping_ready) { WSContentSend_P(PSTR(D_ZIGBEE_MAPPING_NOT_PRESENT)); } else { WSContentSend_P(msg[ZB_WEB_VIS_JS_BEFORE]); zigbee_mapper.dumpInternals(); WSContentSend_P(msg[ZB_WEB_VIS_JS_AFTER]); WSContentSend_P(msg[ZB_WEB_MAP_REFRESH], PSTR(D_ZIGBEE_MAP_REFRESH)); } WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); } /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xdrv23(uint8_t function) { bool result = false; if (zigbee.active) { switch (function) { case FUNC_EVERY_50_MSECOND: if (!zigbee.init_phase) { zigbee_devices.runTimer(); } break; case FUNC_LOOP: #ifdef USE_ZIGBEE_EZSP if (ZigbeeUploadXmodem()) { return false; } #endif if (ZigbeeSerial) { ZigbeeInputLoop(); ZigbeeOutputLoop(); // send any outstanding data ZigbeePermitJoinUpdate(); // timer for permit join } if (zigbee.state_machine) { ZigbeeStateMachine_Run(); } break; #ifdef USE_WEBSERVER case FUNC_WEB_SENSOR: ZigbeeShow(false); break; // GUI xmodem case FUNC_WEB_ADD_HANDLER: #ifdef USE_ZIGBEE_EZSP WebServer_on(PSTR("/" WEB_HANDLE_ZIGBEE_XFER), HandleZigbeeXfer); #endif // USE_ZIGBEE_EZSP WebServer_on(PSTR("/zbm"), ZigbeeShowMap, HTTP_GET); // add web handler for Zigbee map WebServer_on(PSTR("/zbr"), ZigbeeMapRefresh, HTTP_GET); // add web handler for Zigbee map refresh break; case FUNC_WEB_ADD_MAIN_BUTTON: WSContentSend_P(HTTP_BTN_ZB_BUTTONS); break; #endif // USE_WEBSERVER case FUNC_PRE_INIT: ZigbeeInit(); break; case FUNC_COMMAND: result = DecodeCommand(kZbCommands, ZigbeeCommand, kZbSynonyms); break; case FUNC_SAVE_BEFORE_RESTART: #ifdef USE_ZIGBEE_EZSP hibernateAllData(); #endif // USE_ZIGBEE_EZSP restoreDumpAllDevices(); break; } } return result; } #endif // USE_ZIGBEE