# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release-6.7.1/) 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. Support of Core versions before 2.7.1 has been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface only. Support for **WPS** and **SmartConfig** has been removed. ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**. - **tasmota.bin** = The Tasmota version with most drivers. **RECOMMENDED RELEASE BINARY** - **tasmota-BG.bin** to **tasmota-TW.bin** = The Tasmota version in different languages. - **tasmota-lite.bin** = The Lite version without most drivers and sensors. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version. - **tasmota-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**. Above binaries are also available as gzipped version allowing faster uploads. The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota/release. The links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32 based The following binary downloads have been compiled with ESP32/Arduino library core version **1.0.6**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX. **RECOMMENDED RELEASE BINARY** - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32. - **tasmota32-BG.bin** to **tasmota32-TW.bin** = The Tasmota version in different languages. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support. - **tasmota32-webcam.bin** = The Webcam version adds webcam support. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support. - **tasmota32-odroidgo.bin** = The Odroid-Go version is specifically tailored to Odroid_go hardware. - **tasmota32-core2.bin** = The Core2 version is specifically tailored to M5Stack Core2 hardware. The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota32/release. The links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin`` [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v9.4.0.1 ### Added - Command ``Wifi 0/1`` for ESP8266 to turn wifi Off and On. When wifi is Off it is always returned On after a restart except for a wake-up from deepsleep [#11839](https://github.com/arendst/Tasmota/issues/11839) ### Breaking Changed ### Changed - Zigbee refactored storage for device configuration and device last known data [#11838](https://github.com/arendst/Tasmota/issues/11838) ### Fixed - Command ``Power`` should not reset pulsetime [#11805](https://github.com/arendst/Tasmota/issues/11805) - Teleperiod rule handling regression from v9.3.1.2 [#11851](https://github.com/arendst/Tasmota/issues/11851) ### Noted - ESP32 single core **tasmota32solo1.bin** binary can only be uploaded using the GUI as OTA upload will trigger the watchdog timer