/* xdrv_01_webserver.ino - webserver for Tasmota Copyright (C) 2020 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifdef USE_WEBSERVER /*********************************************************************************************\ * Web server and WiFi Manager * * Enables configuration and reconfiguration of WiFi credentials using a Captive Portal * Based on source by AlexT (https://github.com/tzapu) \*********************************************************************************************/ #define XDRV_01 1 #ifndef WIFI_SOFT_AP_CHANNEL #define WIFI_SOFT_AP_CHANNEL 1 // Soft Access Point Channel number between 1 and 11 as used by WifiManager web GUI #endif const uint16_t CHUNKED_BUFFER_SIZE = (MESSZ / 2) - 100; // Chunk buffer size (should be smaller than half mqtt_data size = MESSZ) const uint16_t HTTP_REFRESH_TIME = 2345; // milliseconds const uint16_t HTTP_RESTART_RECONNECT_TIME = 9000; // milliseconds - Allow time for restart and wifi reconnect const uint16_t HTTP_OTA_RESTART_RECONNECT_TIME = 20000; // milliseconds - Allow time for uploading binary, unzip/write to final destination and wifi reconnect #include #include #ifdef USE_RF_FLASH uint8_t *efm8bb1_update = nullptr; #endif // USE_RF_FLASH enum UploadTypes { UPL_TASMOTA, UPL_SETTINGS, UPL_EFM8BB1, UPL_TASMOTACLIENT, UPL_EFR32 }; #ifdef USE_UNISHOX_COMPRESSION #ifdef USE_JAVASCRIPT_ES6 // insert D_HTML_LANGUAGE later const size_t HTTP_HEADER1_SIZE = 377; const char HTTP_HEADER1_COMPRESSED[] PROGMEM = "\x3D\x0F\xE1\x10\x98\x1D\x19\x0C\x64\x85\x50\xD0\x8F\xC3\xD0\x55\x0D\x09\x05\x7C" "\x3C\x7C\x3F\xB2\xEC\xD7\xE6\x86\x7D\x78\xFE\xCB\xB3\x5F\x9A\x1A\x0C\x2B\xF7\x8F" "\x87\xB0\xF6\x1F\x87\xA0\xA7\x62\x1F\x87\xA0\xD7\x56\x83\x15\x7F\xF3\xA3\xE1\xF6" "\x2E\x8C\x1D\x67\x3E\x7D\x90\x21\x52\xEB\x1A\xCF\x87\xB0\xCF\x58\xF8\xCC\xFD\x1E" "\xC4\x1E\x75\x3E\xA3\xE1\xEC\x1F\xD1\x28\x51\xF0\x46\x67\xA1\xB3\xAC\x7F\x44\xA1" "\x47\x56\xF6\xD6\xD8\x47\x5F\x83\xB0\x99\xF0\xE4\x3A\x88\x5F\x9F\xCE\xBF\x07\x61" "\x58\xE0\x99\xF3\xB0\xF6\x1D\x87\xE1\xE9\x5B\x41\x33\xF0\xFA\xF2\x3A\xD1\xF5\xE3" "\xD0\xEC\x04\x19\x67\xA7\x83\xFE\x8C\xA3\xF0\xCE\xFE\x8D\x87\xCE\x16\x10\x47\x50" "\x54\x75\x56\x1D\x54\x30\xEA\x18\x19\xF0\xFB\x3E\xCF\x0C\x71\xF3\xC7\xC3\xF0\x4C" "\x0C\x58\xD7\xD4\x74\x1E\x74\x4C\x26\x35\xF5\x10\xE3\x22\xD1\x0E\xEF\x8E\xF1\xE0" "\xD5\xE0\x48\xBA\x6A\x16\xFE\x64\x5E\x61\x30\xEB\x3E\x77\x7C\x77\x8F\x1E\x18\x7C" "\xD3\xE1\xF8\xC7\x1D\xDD\x3B\xC7\x4A\x32\x18\xCF\x87\x74\x11\xA4\x1F\x0F\x87\xDD" "\x33\x65\x1F\x67\x68\xFB\x19\x7E\xF0\xFE\x7C\x43\xEC\xF3\x04\x19\xC7\x78\xF0\x3E" "\x11\xF0\xC1\xF0\xFC\x1F\xDE\x13\x07\xCE\x96\x20\x84\xCC\xDF\x51\x05\xBE\xA7\xCF" "\xE7\x74\xFB\x0B\x2C\x43\xEC\xEA\x30\x77\x8F\x06"; #define HTTP_HEADER1 Decompress(HTTP_HEADER1_COMPRESSED,HTTP_HEADER1_SIZE).c_str() #else const size_t HTTP_HEADER1_SIZE = 431; const char HTTP_HEADER1_COMPRESSED[] PROGMEM = "\x3D\x0F\xE1\x10\x98\x1D\x19\x0C\x64\x85\x50\xD0\x8F\xC3\xD0\x55\x0D\x09\x05\x7C" "\x3C\x7C\x3F\xB2\xEC\xD7\xE6\x86\x7D\x78\xFE\xCB\xB3\x5F\x9A\x1A\x0C\x2B\xF7\x8F" "\x87\xB0\xF6\x1F\x87\xA0\xA7\x62\x1F\x87\xA0\xD7\x56\x83\x15\x7F\xF3\xA3\xE1\xF6" "\x2E\x8C\x1D\x67\x3E\x7D\x90\x21\x52\xEB\x1A\xCF\x87\xB0\xCF\x58\xF8\xCC\xFD\x1E" "\xC4\x1E\x75\x3E\xA3\xE1\xEC\x1F\xD1\x28\x51\xF0\x46\x67\xA1\xB3\xAC\x7F\x44\xA1" "\x47\x56\xF6\xD6\xD8\x47\x5F\x83\xB0\x99\xF0\xE4\x3A\x88\x5F\x9F\xCE\xBF\x07\x61" "\x58\xE0\x99\xF3\xB0\xF6\x1D\x87\xE1\xE9\x5B\x41\x33\xF0\xFA\xF2\x3A\xD1\xF5\xE3" "\xD0\xEC\x04\x19\x67\xA7\x83\xFE\x8C\xA3\xF0\xCE\xFE\x8D\x87\xCE\x16\x10\x47\x50" "\x54\x75\x56\x1D\x54\x30\xEA\x18\x19\xF0\xFB\x3E\xCF\x06\x05\xF0\x75\xB9\xC9\x8E" "\x3B\xBE\x3B\xC7\xB7\xEE\x85\xFF\x90\x98\x18\xB1\xAF\xA8\xE8\x3C\xE8\x98\x4C\x6B" "\xEA\x21\xC6\x45\xA2\x1D\xDF\x1D\xE3\xC1\xEE\x04\x4C\x38\xD5\xE0\x4F\xC3\x8D\x42" "\xDF\xCC\x8B\xCC\x26\x1D\x67\xC1\x27\x0D\xF0\xC3\xBB\xA7\x78\xF6\xB1\xC7\x77\x4E" "\xF1\xD2\x8C\x86\x33\xE1\xDD\x04\x69\x07\xC3\xE1\xF7\x4C\xD9\x47\xD9\xDA\x3E\xC6" "\x5F\xBC\x3F\x9F\x10\xFB\x3C\xC1\x06\x70\x23\xE3\xE3\xE1\x1D\xD3\x07\x78\xF6\x8F" "\xEF\x09\x83\xE7\x4B\x10\x42\x66\x6F\xA8\x82\xDF\x53\xE7\xF3\xBA\x7D\x85\x96\x21" "\xF6\x75\x18\x3B\xC7\x83\xDC"; #define HTTP_HEADER1 Decompress(HTTP_HEADER1_COMPRESSED,HTTP_HEADER1_SIZE).c_str() #endif // USE_JAVASCRIPT_ES6 #else const char HTTP_HEADER1[] PROGMEM = "" "" "" "" "%s - %s" ""; #endif //USE_UNISHOX_COMPRESSION #ifdef USE_UNISHOX_COMPRESSION const size_t HTTP_HEAD_STYLE1_SIZE = 591; const char HTTP_HEAD_STYLE1_COMPRESSED[] PROGMEM = "\x3D\x3D\x46\x41\x33\xF0\x4D\x33\x3A\x8C\x6B\x08\x4F\x3A\x3A\xB7\x86\x0B\xA3\xAB" "\xCC\x26\x1D\x1E\xD1\x96\x20\x9B\xC3\xC7\x99\xCD\x21\x86\xC3\xC1\x8C\xEA\x3A\xFD" "\xA6\xD6\x79\x9C\x84\xC6\x9E\x0F\x70\x21\xE1\xA7\xB4\x75\x86\x68\x3D\xFC\x17\xC2" "\x1E\x67\x91\xF4\x71\xF1\x1B\x0F\x07\xB8\x61\xED\x1B\x7F\x1E\xDE\x3C\xCE\x33\xA6" "\x93\x1A\x8E\x33\xC1\xEE\x2D\xE1\x82\xE8\xF6\x8F\xE8\x94\x28\xF3\x39\x1B\x3E\x8F" "\xA3\xC1\x0E\xC3\x61\xD7\xED\x36\xEF\x0F\x1E\x63\xB3\xE2\x3F\x9D\x63\xB0\xD8\x78" "\x3A\xC7\xD8\xE3\x4D\xA3\xAC\x14\xAD\x0D\xC3\x68\x29\x57\x04\xCD\x84\x3C\x0B\x3E" "\x08\x7B\x6E\xF0\xC1\x74\x7B\xD4\x64\x31\x9F\x03\x14\xC3\x34\x1D\x86\xC3\xDF\x04" "\x1E\x11\x41\x06\x8F\xEC\x4D\xC3\xDF\x04\x3D\xF1\x8D\x3C\x02\x0F\x03\x87\x5F\xF4" "\x78\x55\x1E\x67\x38\x86\x1B\x0F\x06\x6F\xF5\xA1\xD8\x47\x5D\x85\xA3\xDC\x79\x9D" "\x67\x21\x0C\x04\x9C\xCF\xF7\xC3\xCC\x10\xF1\xE3\x89\x1F\x47\xD1\xE0\xF7\x10\x21" "\x71\x3E\x09\x1C\x28\x82\xC7\x2A\x01\x54\xCD\x95\x7F\x76\x7B\x7E\xFD\xA6\xD6\x79" "\x82\x1E\xA0\x78\x04\x2C\xC8\xE7\xCF\xA3\xE8\xF0\x42\x9E\x8F\x0A\xA3\xCC\xE5\xCF" "\x90\xC3\x61\xE0\x11\xF8\xFA\xC3\x37\xF3\x01\x60\xF9\xE7\x62\xEB\x01\x6B\x45\x1D" "\x82\x19\x1E\xDA\x66\xCA\x04\x2E\x0A\x83\x7D\x4F\xE0\x83\xC9\xE9\x8B\x1B\xA1\x19" "\x1E\x66\x6F\xE2\x5F\x59\xD5\xEB\xEF\x1D\x7E\x7F\xD3\x2A\x01\x9B\x98\x1E\xEA\x10" "\x11\x39\x7D\x38\xC8\x61\xB0\xF0\x7B\x8D"; #define HTTP_HEAD_STYLE1 Decompress(HTTP_HEAD_STYLE1_COMPRESSED,HTTP_HEAD_STYLE1_SIZE).c_str() #else const char HTTP_HEAD_STYLE1[] PROGMEM = "" "" "" "
" // COLOR_TEXT #ifdef FIRMWARE_MINIMAL "

" D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "

" // COLOR_TEXT_WARNING #endif "
" // COLOR_TITLE #ifdef LANGUAGE_MODULE_NAME "

" D_MODULE " %s

" #else "

%s " D_MODULE "

" #endif "

%s

"; const char HTTP_MSG_SLIDER_GRADIENT[] PROGMEM = "
" "" "
"; const char HTTP_MSG_SLIDER_SHUTTER[] PROGMEM = "
" D_CLOSE "" D_OPEN "
" "
"; const char HTTP_MSG_RSTRT[] PROGMEM = "
" D_DEVICE_WILL_RESTART "

"; const char HTTP_FORM_LOGIN[] PROGMEM = "
" "
" "

" D_USER "

" "

" D_PASSWORD "

" "
" "" "
"; const char HTTP_FORM_TEMPLATE[] PROGMEM = "
 " D_TEMPLATE_PARAMETERS " " "
"; const char HTTP_FORM_TEMPLATE_FLAG[] PROGMEM = "

" // Keep close so do not use
"
 " D_TEMPLATE_FLAGS " 

" // "
" "

"; const char HTTP_FORM_MODULE[] PROGMEM = "
 " D_MODULE_PARAMETERS " " "" "

" D_MODULE_TYPE " (%s)

" "
"; const char HTTP_FORM_WIFI[] PROGMEM = "
 " D_WIFI_PARAMETERS " " "" "

" D_AP1_SSID " (" STA_SSID1 ")

" // Need \" instead of ' to be able to use ' in text (#8489) "


" "

" D_AP2_SSID " (" STA_SSID2 ")

" "


" "

" D_HOSTNAME " (%s)

" "

" D_CORS_DOMAIN "

"; const char HTTP_FORM_LOG1[] PROGMEM = "
 " D_LOGGING_PARAMETERS " " ""; const char HTTP_FORM_LOG2[] PROGMEM = "

" D_SYSLOG_HOST " (" SYS_LOG_HOST ")

" "

" D_SYSLOG_PORT " (" STR(SYS_LOG_PORT) ")

" "

" D_TELEMETRY_PERIOD " (" STR(TELE_PERIOD) ")

"; const char HTTP_FORM_OTHER[] PROGMEM = "
 " D_OTHER_PARAMETERS " " "" "

" "
 " D_TEMPLATE " " "

" // We need ' apostrophe here as the template contains " quotation mark "

" "
" "
" "

" "
" "
" "
" "

" "
"; const char HTTP_FORM_END[] PROGMEM = "
" "" "
"; const char HTTP_FORM_RST[] PROGMEM = "
" "
 " D_RESTORE_CONFIGURATION " "; const char HTTP_FORM_UPG[] PROGMEM = "
" "
 " D_UPGRADE_BY_WEBSERVER " " "
" "
" D_OTA_URL "

" "
" "


" "
 " D_UPGRADE_BY_FILE_UPLOAD " "; const char HTTP_FORM_RST_UPG[] PROGMEM = "
" "

" "
" "
" "
" ""; const char HTTP_FORM_CMND[] PROGMEM = "


" "
" "
" // "
" ""; const char HTTP_TABLE100[] PROGMEM = "
"; const char HTTP_COUNTER[] PROGMEM = "
"; const char HTTP_END[] PROGMEM = "" "" "" ""; const char HTTP_DEVICE_CONTROL[] PROGMEM = ""; // ?o is related to WebGetArg("o", tmp, sizeof(tmp)); const char HTTP_DEVICE_STATE[] PROGMEM = ""; // {c} = %'>
0) && (source < SRC_MAX)) { char stemp1[20]; AddLog_P2(LOG_LEVEL_DEBUG, PSTR("SRC: %s from %s"), GetTextIndexed(stemp1, sizeof(stemp1), source, kCommandSource), Webserver->client().remoteIP().toString().c_str()); } } void ExecuteWebCommand(char* svalue, uint32_t source) { ShowWebSource(source); last_source = source; ExecuteCommand(svalue, SRC_IGNORE); } // replace the series of `Webserver->on()` with a table in PROGMEM typedef struct WebServerDispatch_t { char uri[3]; // the prefix "/" is added automatically uint8_t method; void (*handler)(void); } WebServerDispatch_t; const WebServerDispatch_t WebServerDispatch[] PROGMEM = { { "", HTTP_ANY, HandleRoot }, { "up", HTTP_ANY, HandleUpgradeFirmware }, { "u1", HTTP_ANY, HandleUpgradeFirmwareStart }, // OTA { "u2", HTTP_OPTIONS, HandlePreflightRequest }, { "u3", HTTP_ANY, HandleUploadDone }, { "cs", HTTP_GET, HandleConsole }, { "cs", HTTP_OPTIONS, HandlePreflightRequest }, { "cm", HTTP_ANY, HandleHttpCommand }, #ifndef FIRMWARE_MINIMAL { "cn", HTTP_ANY, HandleConfiguration }, { "md", HTTP_ANY, HandleModuleConfiguration }, { "wi", HTTP_ANY, HandleWifiConfiguration }, { "lg", HTTP_ANY, HandleLoggingConfiguration }, { "tp", HTTP_ANY, HandleTemplateConfiguration }, { "co", HTTP_ANY, HandleOtherConfiguration }, { "dl", HTTP_ANY, HandleBackupConfiguration }, { "rs", HTTP_ANY, HandleRestoreConfiguration }, { "rt", HTTP_ANY, HandleResetConfiguration }, { "in", HTTP_ANY, HandleInformation }, #endif // Not FIRMWARE_MINIMAL }; void WebServer_on(const char * prefix, void (*func)(void), uint8_t method = HTTP_ANY) { Webserver->on((const __FlashStringHelper *) prefix, (HTTPMethod) method, func); } void StartWebserver(int type, IPAddress ipweb) { if (!Settings.web_refresh) { Settings.web_refresh = HTTP_REFRESH_TIME; } if (!Web.state) { if (!Webserver) { Webserver = new ESP8266WebServer((HTTP_MANAGER == type || HTTP_MANAGER_RESET_ONLY == type) ? 80 : WEB_PORT); // call `Webserver->on()` on each entry for (uint32_t i=0; ionNotFound(HandleNotFound); Webserver->on("/u2", HTTP_POST, HandleUploadDone, HandleUploadLoop); // this call requires 2 functions so we keep a direct call #ifndef FIRMWARE_MINIMAL XdrvCall(FUNC_WEB_ADD_HANDLER); XsnsCall(FUNC_WEB_ADD_HANDLER); #endif // Not FIRMWARE_MINIMAL } Web.reset_web_log_flag = false; Webserver->begin(); // Web server start } if (Web.state != type) { #if LWIP_IPV6 String ipv6_addr = WifiGetIPv6(); if (ipv6_addr!="") { AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_HTTP D_WEBSERVER_ACTIVE_ON " %s%s " D_WITH_IP_ADDRESS " %s and IPv6 global address %s "), NetworkHostname(), (Mdns.begun) ? ".local" : "", ipweb.toString().c_str(), ipv6_addr.c_str()); } else { AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_HTTP D_WEBSERVER_ACTIVE_ON " %s%s " D_WITH_IP_ADDRESS " %s"), NetworkHostname(), (Mdns.begun) ? ".local" : "", ipweb.toString().c_str()); } #else AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_HTTP D_WEBSERVER_ACTIVE_ON " %s%s " D_WITH_IP_ADDRESS " %s"), NetworkHostname(), (Mdns.begun) ? ".local" : "", ipweb.toString().c_str()); #endif // LWIP_IPV6 = 1 rules_flag.http_init = 1; } if (type) { Web.state = type; } } void StopWebserver(void) { if (Web.state) { Webserver->close(); Web.state = HTTP_OFF; AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_HTTP D_WEBSERVER_STOPPED)); } } void WifiManagerBegin(bool reset_only) { // setup AP if (!global_state.wifi_down) { // WiFi.mode(WIFI_AP_STA); WifiSetMode(WIFI_AP_STA); AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION)); } else { // WiFi.mode(WIFI_AP); WifiSetMode(WIFI_AP); AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_WIFIMANAGER_SET_ACCESSPOINT)); } StopWebserver(); DnsServer = new DNSServer(); int channel = WIFI_SOFT_AP_CHANNEL; if ((channel < 1) || (channel > 13)) { channel = 1; } // bool softAP(const char* ssid, const char* passphrase = NULL, int channel = 1, int ssid_hidden = 0, int max_connection = 4); WiFi.softAP(my_hostname, WIFI_AP_PASSPHRASE, channel, 0, 1); delay(500); // Without delay I've seen the IP address blank /* Setup the DNS server redirecting all the domains to the apIP */ DnsServer->setErrorReplyCode(DNSReplyCode::NoError); DnsServer->start(DNS_PORT, "*", WiFi.softAPIP()); StartWebserver((reset_only ? HTTP_MANAGER_RESET_ONLY : HTTP_MANAGER), WiFi.softAPIP()); } void PollDnsWebserver(void) { if (DnsServer) { DnsServer->processNextRequest(); } if (Webserver) { Webserver->handleClient(); } } /*********************************************************************************************/ bool WebAuthenticate(void) { if (strlen(SettingsText(SET_WEBPWD)) && (HTTP_MANAGER_RESET_ONLY != Web.state)) { return Webserver->authenticate(WEB_USERNAME, SettingsText(SET_WEBPWD)); } else { return true; } } bool HttpCheckPriviledgedAccess(bool autorequestauth = true) { if (HTTP_USER == Web.state) { HandleRoot(); return false; } if (autorequestauth && !WebAuthenticate()) { Webserver->requestAuthentication(); return false; } return true; } void HttpHeaderCors(void) { if (strlen(SettingsText(SET_CORS))) { Webserver->sendHeader(F("Access-Control-Allow-Origin"), SettingsText(SET_CORS)); } } void WSHeaderSend(void) { Webserver->sendHeader(F("Cache-Control"), F("no-cache, no-store, must-revalidate")); Webserver->sendHeader(F("Pragma"), F("no-cache")); Webserver->sendHeader(F("Expires"), F("-1")); HttpHeaderCors(); } /********************************************************************************************** * HTTP Content Page handler **********************************************************************************************/ void WSSend(int code, int ctype, const String& content) { char ct[25]; // strlen("application/octet-stream") +1 = Longest Content type string Webserver->send(code, GetTextIndexed(ct, sizeof(ct), ctype, kContentTypes), content); } /********************************************************************************************** * HTTP Content Chunk handler **********************************************************************************************/ void WSContentBegin(int code, int ctype) { Webserver->client().flush(); WSHeaderSend(); Webserver->setContentLength(CONTENT_LENGTH_UNKNOWN); WSSend(code, ctype, ""); // Signal start of chunked content Web.chunk_buffer = ""; } void _WSContentSend(const String& content) // Low level sendContent for all core versions { size_t len = content.length(); Webserver->sendContent(content); #ifdef USE_DEBUG_DRIVER ShowFreeMem(PSTR("WSContentSend")); #endif DEBUG_CORE_LOG(PSTR("WEB: Chunk size %d/%d"), len, sizeof(mqtt_data)); } void WSContentFlush(void) { if (Web.chunk_buffer.length() > 0) { _WSContentSend(Web.chunk_buffer); // Flush chunk buffer Web.chunk_buffer = ""; } } void _WSContentSendBuffer(void) { int len = strlen(mqtt_data); if (0 == len) { // No content return; } else if (len == sizeof(mqtt_data)) { AddLog_P(LOG_LEVEL_INFO, PSTR("HTP: Content too large")); } else if (len < CHUNKED_BUFFER_SIZE) { // Append chunk buffer with small content Web.chunk_buffer += mqtt_data; len = Web.chunk_buffer.length(); } if (len >= CHUNKED_BUFFER_SIZE) { // Either content or chunk buffer is oversize WSContentFlush(); // Send chunk buffer before possible content oversize } if (strlen(mqtt_data) >= CHUNKED_BUFFER_SIZE) { // Content is oversize _WSContentSend(mqtt_data); // Send content } } void WSContentSend_P(const char* formatP, ...) // Content send snprintf_P char data { // This uses char strings. Be aware of sending %% if % is needed va_list arg; va_start(arg, formatP); int len = vsnprintf_P(mqtt_data, sizeof(mqtt_data), formatP, arg); va_end(arg); #ifdef DEBUG_TASMOTA_CORE if (len > (sizeof(mqtt_data) -1)) { mqtt_data[33] = '\0'; DEBUG_CORE_LOG(PSTR("ERROR: WSContentSend_P size %d > mqtt_data size %d. Start of data [%s...]"), len, sizeof(mqtt_data), mqtt_data); } #endif _WSContentSendBuffer(); } void WSContentSend_PD(const char* formatP, ...) // Content send snprintf_P char data checked for decimal separator { // This uses char strings. Be aware of sending %% if % is needed va_list arg; va_start(arg, formatP); int len = vsnprintf_P(mqtt_data, sizeof(mqtt_data), formatP, arg); va_end(arg); #ifdef DEBUG_TASMOTA_CORE if (len > (sizeof(mqtt_data) -1)) { mqtt_data[33] = '\0'; DEBUG_CORE_LOG(PSTR("ERROR: WSContentSend_PD size %d > mqtt_data size %d. Start of data [%s...]"), len, sizeof(mqtt_data), mqtt_data); } #endif if (D_DECIMAL_SEPARATOR[0] != '.') { for (uint32_t i = 0; i < len; i++) { if ('.' == mqtt_data[i]) { mqtt_data[i] = D_DECIMAL_SEPARATOR[0]; } } } _WSContentSendBuffer(); } void WSContentStart_P(const char* title, bool auth) { if (auth && strlen(SettingsText(SET_WEBPWD)) && !Webserver->authenticate(WEB_USERNAME, SettingsText(SET_WEBPWD))) { return Webserver->requestAuthentication(); } WSContentBegin(200, CT_HTML); if (title != nullptr) { #ifdef USE_UNISHOX_COMPRESSION WSContentSend_P(HTTP_HEADER1, D_HTML_LANGUAGE, SettingsText(SET_DEVICENAME), title); #else WSContentSend_P(HTTP_HEADER1, SettingsText(SET_DEVICENAME), title); #endif //USE_UNISHOX_COMPRESSION } } void WSContentStart_P(const char* title) { WSContentStart_P(title, true); } void WSContentSendStyle_P(const char* formatP, ...) { if (WifiIsInManagerMode()) { if (WifiConfigCounter()) { WSContentSend_P(HTTP_SCRIPT_COUNTER); } } WSContentSend_P(HTTP_HEAD_LAST_SCRIPT); WSContentSend_P(HTTP_HEAD_STYLE1, WebColor(COL_FORM), WebColor(COL_INPUT), WebColor(COL_INPUT_TEXT), WebColor(COL_INPUT), WebColor(COL_INPUT_TEXT), WebColor(COL_CONSOLE), WebColor(COL_CONSOLE_TEXT), WebColor(COL_BACKGROUND)); WSContentSend_P(HTTP_HEAD_STYLE2, WebColor(COL_BUTTON), WebColor(COL_BUTTON_TEXT), WebColor(COL_BUTTON_HOVER), WebColor(COL_BUTTON_RESET), WebColor(COL_BUTTON_RESET_HOVER), WebColor(COL_BUTTON_SAVE), WebColor(COL_BUTTON_SAVE_HOVER), WebColor(COL_BUTTON)); #ifdef USE_ZIGBEE WSContentSend_P(HTTP_HEAD_STYLE_ZIGBEE); #endif // USE_ZIGBEE if (formatP != nullptr) { // This uses char strings. Be aware of sending %% if % is needed va_list arg; va_start(arg, formatP); int len = vsnprintf_P(mqtt_data, sizeof(mqtt_data), formatP, arg); va_end(arg); #ifdef DEBUG_TASMOTA_CORE if (len > (sizeof(mqtt_data) -1)) { mqtt_data[33] = '\0'; DEBUG_CORE_LOG(PSTR("ERROR: WSContentSendStyle_P size %d > mqtt_data size %d. Start of data [%s...]"), len, sizeof(mqtt_data), mqtt_data); } #endif _WSContentSendBuffer(); } WSContentSend_P(HTTP_HEAD_STYLE3, WebColor(COL_TEXT), #ifdef FIRMWARE_MINIMAL WebColor(COL_TEXT_WARNING), #endif WebColor(COL_TITLE), ModuleName().c_str(), SettingsText(SET_DEVICENAME)); if (Settings.flag3.gui_hostname_ip) { // SetOption53 - Show hostanme and IP address in GUI main menu bool lip = (static_cast(WiFi.localIP()) != 0); bool sip = (static_cast(WiFi.softAPIP()) != 0); WSContentSend_P(PSTR("

%s%s (%s%s%s)

"), // tasmota.local (192.168.2.12, 192.168.4.1) NetworkHostname(), (Mdns.begun) ? ".local" : "", (lip) ? WiFi.localIP().toString().c_str() : "", (lip && sip) ? ", " : "", (sip) ? WiFi.softAPIP().toString().c_str() : ""); } WSContentSend_P(PSTR("
")); } void WSContentSendStyle(void) { WSContentSendStyle_P(nullptr); } void WSContentButton(uint32_t title_index) { char action[4]; char title[100]; // Large to accomodate UTF-16 as used by Russian if (title_index <= BUTTON_RESET_CONFIGURATION) { char confirm[100]; WSContentSend_P(PSTR("

"), GetTextIndexed(action, sizeof(action), title_index, kButtonAction), GetTextIndexed(confirm, sizeof(confirm), title_index, kButtonConfirm), (!title_index) ? "rst" : "non", GetTextIndexed(title, sizeof(title), title_index, kButtonTitle)); } else { WSContentSend_P(PSTR("

"), GetTextIndexed(action, sizeof(action), title_index, kButtonAction), GetTextIndexed(title, sizeof(title), title_index, kButtonTitle)); } } void WSContentSpaceButton(uint32_t title_index) { WSContentSend_P(PSTR("
")); // 5px padding WSContentButton(title_index); } void WSContentSend_THD(const char *types, float f_temperature, float f_humidity) { char parameter[FLOATSZ]; dtostrfd(f_temperature, Settings.flag2.temperature_resolution, parameter); WSContentSend_PD(HTTP_SNS_TEMP, types, parameter, TempUnit()); dtostrfd(f_humidity, Settings.flag2.humidity_resolution, parameter); WSContentSend_PD(HTTP_SNS_HUM, types, parameter); dtostrfd(CalcTempHumToDew(f_temperature, f_humidity), Settings.flag2.temperature_resolution, parameter); WSContentSend_PD(HTTP_SNS_DEW, types, parameter, TempUnit()); } void WSContentEnd(void) { WSContentFlush(); // Flush chunk buffer _WSContentSend(""); // Signal end of chunked content Webserver->client().stop(); } void WSContentStop(void) { if (WifiIsInManagerMode()) { if (WifiConfigCounter()) { WSContentSend_P(HTTP_COUNTER); } } WSContentSend_P(HTTP_END, my_version); WSContentEnd(); } /*********************************************************************************************/ void WebRestart(uint32_t type) { // type 0 = restart // type 1 = restart after config change // type 2 = restart after config change with possible ip address change too AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_RESTART); bool reset_only = (HTTP_MANAGER_RESET_ONLY == Web.state); WSContentStart_P((type) ? S_SAVE_CONFIGURATION : S_RESTART, !reset_only); WSContentSend_P(HTTP_SCRIPT_RELOAD_TIME, HTTP_RESTART_RECONNECT_TIME); WSContentSendStyle(); if (type) { WSContentSend_P(PSTR("
" D_CONFIGURATION_SAVED "
")); if (2 == type) { WSContentSend_P(PSTR("
" D_TRYING_TO_CONNECT "
")); } WSContentSend_P(PSTR("
")); } WSContentSend_P(HTTP_MSG_RSTRT); if (HTTP_MANAGER == Web.state || reset_only) { Web.state = HTTP_ADMIN; } else { WSContentSpaceButton(BUTTON_MAIN); } WSContentStop(); ShowWebSource(SRC_WEBGUI); restart_flag = 2; } /*********************************************************************************************/ void HandleWifiLogin(void) { WSContentStart_P(S_CONFIGURE_WIFI, false); // false means show page no matter if the client has or has not credentials WSContentSendStyle(); WSContentSend_P(HTTP_FORM_LOGIN); if (HTTP_MANAGER_RESET_ONLY == Web.state) { WSContentSpaceButton(BUTTON_RESTART); #ifndef FIRMWARE_MINIMAL WSContentSpaceButton(BUTTON_RESET_CONFIGURATION); #endif // FIRMWARE_MINIMAL } WSContentStop(); } #ifdef USE_LIGHT void WebSliderColdWarm(void) { WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Cold Warm "a", // a - Unique HTML id "#eff", "#f81", // 6500k in RGB (White) to 2500k in RGB (Warm Yellow) 1, // sl1 153, 500, // Range color temperature LightGetColorTemp(), 't', 0); // t0 - Value id releated to lc("t0", value) and WebGetArg("t0", tmp, sizeof(tmp)); } #endif // USE_LIGHT void HandleRoot(void) { if (CaptivePortal()) { return; } // If captive portal redirect instead of displaying the page. if (Webserver->hasArg("rst")) { WebRestart(0); return; } if (WifiIsInManagerMode()) { #ifndef FIRMWARE_MINIMAL if (strlen(SettingsText(SET_WEBPWD)) && !(Webserver->hasArg("USER1")) && !(Webserver->hasArg("PASS1")) && HTTP_MANAGER_RESET_ONLY != Web.state) { HandleWifiLogin(); } else { if (!strlen(SettingsText(SET_WEBPWD)) || (((Webserver->arg("USER1") == WEB_USERNAME ) && (Webserver->arg("PASS1") == SettingsText(SET_WEBPWD) )) || HTTP_MANAGER_RESET_ONLY == Web.state)) { HandleWifiConfiguration(); } else { // wrong user and pass HandleWifiLogin(); } } #endif // Not FIRMWARE_MINIMAL return; } if (HandleRootStatusRefresh()) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_MAIN_MENU); char stemp[33]; WSContentStart_P(S_MAIN_MENU); #ifdef USE_SCRIPT_WEB_DISPLAY WSContentSend_P(HTTP_SCRIPT_ROOT, Settings.web_refresh, Settings.web_refresh); #else WSContentSend_P(HTTP_SCRIPT_ROOT, Settings.web_refresh); #endif WSContentSend_P(HTTP_SCRIPT_ROOT_PART2); WSContentSendStyle(); WSContentSend_P(PSTR("
")); if (devices_present) { #ifdef USE_LIGHT if (light_type) { uint8_t light_subtype = light_type &7; if (!Settings.flag3.pwm_multi_channels) { // SetOption68 0 - Enable multi-channels PWM instead of Color PWM bool split_white = ((LST_RGBW <= light_subtype) && (devices_present > 1)); // Only on RGBW or RGBCW and SetOption37 128 if ((LST_COLDWARM == light_subtype) || ((LST_RGBCW == light_subtype) && !split_white)) { WebSliderColdWarm(); } if (light_subtype > 2) { // No W or CW uint16_t hue; uint8_t sat; LightGetHSB(&hue, &sat, nullptr); WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Hue "b", // b - Unique HTML id "#800", PSTR("#f00 5%,#ff0 20%,#0f0 35%,#0ff 50%,#00f 65%,#f0f 80%,#f00 95%,#800"), // Hue colors 2, // sl2 - Unique range HTML id - Used as source for Saturation end color 1, 359, // Range valid Hue hue, 'h', 0); // h0 - Value id uint8_t dcolor = changeUIntScale(Settings.light_dimmer, 0, 100, 0, 255); char scolor[8]; snprintf_P(scolor, sizeof(scolor), PSTR("#%02X%02X%02X"), dcolor, dcolor, dcolor); // Saturation start color from Black to White uint8_t red, green, blue; LightHsToRgb(hue, 255, &red, &green, &blue); snprintf_P(stemp, sizeof(stemp), PSTR("#%02X%02X%02X"), red, green, blue); // Saturation end color WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Saturation "s", // s - Unique HTML id related to eb('s').style.background='linear-gradient(to right,rgb('+sl+'%%,'+sl+'%%,'+sl+'%%),hsl('+eb('sl2').value+',100%%,50%%))'; scolor, stemp, // Brightness to max current color 3, // sl3 - Unique range HTML id - Not used 0, 100, // Range 0 to 100% changeUIntScale(sat, 0, 255, 0, 100), 'n', 0); // n0 - Value id } WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Brightness - Black to White "c", // c - Unique HTML id "#000", "#fff", // Black to White 4, // sl4 - Unique range HTML id - Used as source for Saturation begin color Settings.flag3.slider_dimmer_stay_on, 100, // Range 0/1 to 100% (SetOption77 - Do not power off if slider moved to far left) Settings.light_dimmer, 'd', 0); // d0 - Value id is related to lc("d0", value) and WebGetArg("d0", tmp, sizeof(tmp)); if (split_white) { // SetOption37 128 if (LST_RGBCW == light_subtype) { WebSliderColdWarm(); } WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // White brightness - Black to White "f", // f - Unique HTML id "#000", "#fff", // Black to White 5, // sl5 - Unique range HTML id - Not used Settings.flag3.slider_dimmer_stay_on, 100, // Range 0/1 to 100% (SetOption77 - Do not power off if slider moved to far left) LightGetDimmer(2), 'w', 0); // w0 - Value id is related to lc("w0", value) and WebGetArg("w0", tmp, sizeof(tmp)); } } else { // Settings.flag3.pwm_multi_channels - SetOption68 1 - Enable multi-channels PWM instead of Color PWM uint32_t pwm_channels = light_subtype > LST_MAX ? LST_MAX : light_subtype; stemp[0] = 'e'; stemp[1] = '0'; stemp[2] = '\0'; // d0 for (uint32_t i = 0; i < pwm_channels; i++) { stemp[1]++; // e1 to e5 - Make unique ids WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Channel brightness - Black to White stemp, // e1 to e5 - Unique HTML id "#000", "#fff", // Black to White i+1, // sl1 to sl5 - Unique range HTML id - Not used 1, 100, // Range 1 to 100% changeUIntScale(Settings.light_color[i], 0, 255, 0, 100), 'e', i+1); // e1 to e5 - Value id } } // Settings.flag3.pwm_multi_channels } #endif // USE_LIGHT #ifdef USE_SHUTTER if (Settings.flag3.shutter_mode) { // SetOption80 - Enable shutter support for (uint32_t i = 0; i < shutters_present; i++) { WSContentSend_P(HTTP_MSG_SLIDER_SHUTTER, Settings.shutter_position[i], i+1); } } #endif // USE_SHUTTER WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("")); #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { WSContentSend_P(HTTP_DEVICE_CONTROL, 36, 1, (strlen(SettingsText(SET_BUTTON1))) ? SettingsText(SET_BUTTON1) : D_BUTTON_TOGGLE, ""); for (uint32_t i = 0; i < MaxFanspeed(); i++) { snprintf_P(stemp, sizeof(stemp), PSTR("%d"), i); WSContentSend_P(HTTP_DEVICE_CONTROL, 16, i +2, (strlen(SettingsText(SET_BUTTON2 + i))) ? SettingsText(SET_BUTTON2 + i) : stemp, ""); } } else { #endif // USE_SONOFF_IFAN for (uint32_t idx = 1; idx <= devices_present; idx++) { bool set_button = ((idx <= MAX_BUTTON_TEXT) && strlen(SettingsText(SET_BUTTON1 + idx -1))); #ifdef USE_SHUTTER int32_t ShutterWebButton; if (ShutterWebButton = IsShutterWebButton(idx)) { WSContentSend_P(HTTP_DEVICE_CONTROL, 100 / devices_present, idx, (set_button) ? SettingsText(SET_BUTTON1 + idx -1) : ((Settings.shutter_options[abs(ShutterWebButton)-1] & 2) /* is locked */ ? "-" : ((Settings.shutter_options[abs(ShutterWebButton)-1] & 8) /* invert web buttons */ ? ((ShutterWebButton>0) ? "▼" : "▲") : ((ShutterWebButton>0) ? "▲" : "▼"))), ""); continue; } #endif // USE_SHUTTER snprintf_P(stemp, sizeof(stemp), PSTR(" %d"), idx); WSContentSend_P(HTTP_DEVICE_CONTROL, 100 / devices_present, idx, (set_button) ? SettingsText(SET_BUTTON1 + idx -1) : (devices_present < 5) ? D_BUTTON_TOGGLE : "", (set_button) ? "" : (devices_present > 1) ? stemp : ""); } #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN WSContentSend_P(PSTR("
%s
")); } #ifdef USE_TUYA_MCU if (IsModuleTuya()) { uint8_t modeset = 0; if (AsModuleTuyaMS()) { WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("
")); snprintf_P(stemp, sizeof(stemp), PSTR("" D_JSON_IRHVAC_MODE "")); WSContentSend_P(HTTP_DEVICE_CONTROL, 26, devices_present + 1, (strlen(SettingsText(SET_BUTTON1 + devices_present))) ? SettingsText(SET_BUTTON1 + devices_present) : stemp, ""); WSContentSend_P(PSTR("")); modeset = 1; } if (IsTuyaFanCtrl()) { uint8_t device = devices_present + modeset; WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("
")); for (uint32_t i = device + 1; i <= (TuyaFanSpeeds() + device) + 1; i++) { snprintf_P(stemp, sizeof(stemp), PSTR("%d"), i - (device + 1)); WSContentSend_P(HTTP_DEVICE_CONTROL, 16, i, (strlen(SettingsText(SET_BUTTON1 + i))) ? SettingsText(SET_BUTTON1 + i) : stemp, ""); } WSContentSend_P(PSTR("")); } } #endif // USE_TUYA_MCU #ifdef USE_SONOFF_RF if (SONOFF_BRIDGE == my_module_type) { WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("")); uint32_t idx = 0; for (uint32_t i = 0; i < 4; i++) { if (idx > 0) { WSContentSend_P(PSTR("")); } for (uint32_t j = 0; j < 4; j++) { idx++; snprintf_P(stemp, sizeof(stemp), PSTR("%d"), idx); WSContentSend_P(PSTR(""), idx, // &k is related to WebGetArg("k", tmp, sizeof(tmp)); (strlen(SettingsText(SET_BUTTON1 + idx -1))) ? SettingsText(SET_BUTTON1 + idx -1) : stemp); } } WSContentSend_P(PSTR("")); } #endif // USE_SONOFF_RF #ifndef FIRMWARE_MINIMAL XdrvCall(FUNC_WEB_ADD_MAIN_BUTTON); XsnsCall(FUNC_WEB_ADD_MAIN_BUTTON); #endif // Not FIRMWARE_MINIMAL if (HTTP_ADMIN == Web.state) { #ifdef FIRMWARE_MINIMAL WSContentSpaceButton(BUTTON_FIRMWARE_UPGRADE); #else WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentButton(BUTTON_INFORMATION); WSContentButton(BUTTON_FIRMWARE_UPGRADE); #endif // Not FIRMWARE_MINIMAL WSContentButton(BUTTON_CONSOLE); WSContentButton(BUTTON_RESTART); } WSContentStop(); } bool HandleRootStatusRefresh(void) { if (!WebAuthenticate()) { Webserver->requestAuthentication(); return true; } if (!Webserver->hasArg("m")) { // Status refresh requested return false; } #ifdef USE_SCRIPT_WEB_DISPLAY Script_Check_HTML_Setvars(); #endif char tmp[8]; // WebGetArg numbers only char svalue[32]; // Command and number parameter char webindex[5]; // WebGetArg name WebGetArg("o", tmp, sizeof(tmp)); // 1 - 16 Device number for button Toggle or Fanspeed if (strlen(tmp)) { ShowWebSource(SRC_WEBGUI); uint32_t device = atoi(tmp); #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { if (device < 2) { ExecuteCommandPower(1, POWER_TOGGLE, SRC_IGNORE); } else { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_FANSPEED " %d"), device -2); ExecuteCommand(svalue, SRC_WEBGUI); } } else { #endif // USE_SONOFF_IFAN #ifdef USE_TUYA_MCU if (IsModuleTuya()) { uint8_t FuncIdx = 0; if (device <= devices_present) { ExecuteCommandPower(device, POWER_TOGGLE, SRC_IGNORE); } else { if (AsModuleTuyaMS() && device == devices_present + 1) { uint8_t dpId = TuyaGetDpId(TUYA_MCU_FUNC_MODESET); snprintf_P(svalue, sizeof(svalue), PSTR("Tuyasend4 %d,%d"), dpId, !TuyaModeSet()); ExecuteCommand(svalue, SRC_WEBGUI); } if (IsTuyaFanCtrl()) { uint8_t dpId = 0; for (uint32_t i = 0; i <= 3; i++) { // Tuya Function FAN3 to FAN6 if (TuyaGetDpId(TUYA_MCU_FUNC_FAN3 + i) != 0) { dpId = TuyaGetDpId(TUYA_MCU_FUNC_FAN3 + i); } } if ((AsModuleTuyaMS() && device != devices_present + 1) || !AsModuleTuyaMS()) { if (AsModuleTuyaMS()) {FuncIdx = 1;} snprintf_P(svalue, sizeof(svalue), PSTR("Tuyasend2 %d,%d"), dpId, (device - (devices_present + FuncIdx) - 1)); ExecuteCommand(svalue, SRC_WEBGUI); } } } } else { #endif // USE_TUYA_MCU #ifdef USE_SHUTTER int32_t ShutterWebButton; if (ShutterWebButton = IsShutterWebButton(device)) { snprintf_P(svalue, sizeof(svalue), PSTR("ShutterPosition%d %s"), abs(ShutterWebButton), (ShutterWebButton>0) ? PSTR(D_CMND_SHUTTER_STOPOPEN) : PSTR(D_CMND_SHUTTER_STOPCLOSE)); ExecuteWebCommand(svalue, SRC_WEBGUI); } else { #endif // USE_SHUTTER ExecuteCommandPower(device, POWER_TOGGLE, SRC_IGNORE); #ifdef USE_SHUTTER } #endif // USE_SHUTTER #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN #ifdef USE_TUYA_MCU } #endif // USE_TUYA_MCU } #ifdef USE_LIGHT WebGetArg("d0", tmp, sizeof(tmp)); // 0 - 100 Dimmer value if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_DIMMER " %s"), tmp); ExecuteWebCommand(svalue, SRC_WEBGUI); } WebGetArg("w0", tmp, sizeof(tmp)); // 0 - 100 White value if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_WHITE " %s"), tmp); ExecuteWebCommand(svalue, SRC_WEBGUI); } uint32_t light_device = LightDevice(); // Channel number offset uint32_t pwm_channels = (light_type & 7) > LST_MAX ? LST_MAX : (light_type & 7); for (uint32_t j = 0; j < pwm_channels; j++) { snprintf_P(webindex, sizeof(webindex), PSTR("e%d"), j +1); WebGetArg(webindex, tmp, sizeof(tmp)); // 0 - 100 percent if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_CHANNEL "%d %s"), j +light_device, tmp); ExecuteWebCommand(svalue, SRC_WEBGUI); } } WebGetArg("t0", tmp, sizeof(tmp)); // 153 - 500 Color temperature if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_COLORTEMPERATURE " %s"), tmp); ExecuteWebCommand(svalue, SRC_WEBGUI); } WebGetArg("h0", tmp, sizeof(tmp)); // 0 - 359 Hue value if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_HSBCOLOR "1 %s"), tmp); ExecuteWebCommand(svalue, SRC_WEBGUI); } WebGetArg("n0", tmp, sizeof(tmp)); // 0 - 99 Saturation value if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_HSBCOLOR "2 %s"), tmp); ExecuteWebCommand(svalue, SRC_WEBGUI); } #endif // USE_LIGHT #ifdef USE_SHUTTER for (uint32_t j = 1; j <= shutters_present; j++) { snprintf_P(webindex, sizeof(webindex), PSTR("u%d"), j); WebGetArg(webindex, tmp, sizeof(tmp)); // 0 - 100 percent if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR("ShutterPosition%d %s"), j, tmp); ExecuteWebCommand(svalue, SRC_WEBGUI); } } #endif // USE_SHUTTER #ifdef USE_SONOFF_RF WebGetArg("k", tmp, sizeof(tmp)); // 1 - 16 Pre defined RF keys if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_RFKEY "%s"), tmp); ExecuteWebCommand(svalue, SRC_WEBGUI); } #endif // USE_SONOFF_RF WSContentBegin(200, CT_HTML); WSContentSend_P(PSTR("{t}")); XsnsCall(FUNC_WEB_SENSOR); XdrvCall(FUNC_WEB_SENSOR); WSContentSend_P(PSTR("")); if (devices_present) { WSContentSend_P(PSTR("{t}")); uint32_t fsize = (devices_present < 5) ? 70 - (devices_present * 8) : 32; #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { WSContentSend_P(HTTP_DEVICE_STATE, 36, (bitRead(power, 0)) ? "bold" : "normal", 54, GetStateText(bitRead(power, 0))); uint32_t fanspeed = GetFanspeed(); snprintf_P(svalue, sizeof(svalue), PSTR("%d"), fanspeed); WSContentSend_P(HTTP_DEVICE_STATE, 64, (fanspeed) ? "bold" : "normal", 54, (fanspeed) ? svalue : GetStateText(0)); } else { #endif // USE_SONOFF_IFAN for (uint32_t idx = 1; idx <= devices_present; idx++) { snprintf_P(svalue, sizeof(svalue), PSTR("%d"), bitRead(power, idx -1)); WSContentSend_P(HTTP_DEVICE_STATE, 100 / devices_present, (bitRead(power, idx -1)) ? "bold" : "normal", fsize, (devices_present < 5) ? GetStateText(bitRead(power, idx -1)) : svalue); } #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN WSContentSend_P(PSTR("")); } #ifdef USE_TUYA_MCU if (IsModuleTuya()) { uint32_t fanspeed = TuyaFanState(); uint32_t modeset = TuyaModeSet(); if (IsTuyaFanCtrl() && !AsModuleTuyaMS()) { WSContentSend_P(PSTR("
" D_JSON_IRHVAC_FANSPEED ": %d
"), fanspeed); } else if (!IsTuyaFanCtrl() && AsModuleTuyaMS()) { WSContentSend_P(PSTR("
" D_JSON_IRHVAC_MODE ": %d
"), modeset); } else if (IsTuyaFanCtrl() && AsModuleTuyaMS()) { WSContentSend_P(PSTR("
" D_JSON_IRHVAC_MODE ": %d - " D_JSON_IRHVAC_FANSPEED ": %d
"), modeset, fanspeed); } } #endif // USE_TUYA_MCU WSContentEnd(); return true; } #ifdef USE_SHUTTER int32_t IsShutterWebButton(uint32_t idx) { /* 0: Not a shutter, 1..4: shutter up idx, -1..-4: shutter down idx */ int32_t ShutterWebButton = 0; if (Settings.flag3.shutter_mode) { // SetOption80 - Enable shutter support for (uint32_t i = 0; i < MAX_SHUTTERS; i++) { if (Settings.shutter_startrelay[i] && ((Settings.shutter_startrelay[i] == idx) || (Settings.shutter_startrelay[i] == (idx-1)))) { ShutterWebButton = (Settings.shutter_startrelay[i] == idx) ? (i+1): (-1-i); break; } } } return ShutterWebButton; } #endif // USE_SHUTTER /*-------------------------------------------------------------------------------------------*/ #ifndef FIRMWARE_MINIMAL void HandleConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURATION); WSContentStart_P(S_CONFIGURATION); WSContentSendStyle(); WSContentButton(BUTTON_MODULE); WSContentButton(BUTTON_WIFI); XdrvCall(FUNC_WEB_ADD_BUTTON); XsnsCall(FUNC_WEB_ADD_BUTTON); WSContentButton(BUTTON_LOGGING); WSContentButton(BUTTON_OTHER); WSContentButton(BUTTON_TEMPLATE); WSContentSpaceButton(BUTTON_RESET_CONFIGURATION); WSContentButton(BUTTON_BACKUP); WSContentButton(BUTTON_RESTORE); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); } /*-------------------------------------------------------------------------------------------*/ void WSContentSendNiceLists(uint32_t option) { char stemp[30]; // Template number and Sensor name for (uint32_t i = 0; i < ARRAY_SIZE(kGpioNiceList); i++) { // GPIO: }2'0'>None (0)}3}2'17'>Button1 (17)}3... if (option && (1 == i)) { WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX, AGPIO(GPIO_USER), D_SENSOR_USER); // }2'255'>User}3 } uint32_t ridx = pgm_read_word(kGpioNiceList + i) & 0xFFE0; uint32_t midx = BGPIO(ridx); WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX, ridx, GetTextIndexed(stemp, sizeof(stemp), midx, kSensorNames)); } WSContentSend_P(PSTR("\";")); WSContentSend_P(PSTR("hs=[")); uint32_t midx; bool first_done = false; for (uint32_t i = 0; i < ARRAY_SIZE(kGpioNiceList); i++) { // hs=[36,68,100,132,168,200,232,264,292,324,356,388,421,453]; midx = pgm_read_word(kGpioNiceList + i); if (midx & 0x001F) { if (first_done) { WSContentSend_P(PSTR(",")); } WSContentSend_P(PSTR("%d"), midx); first_done = true; } } #ifdef ESP8266 #ifdef USE_ADC for (uint32_t i = 0; i < ARRAY_SIZE(kAdcNiceList); i++) { // hs=[36,68,100,132,168,200,232,264,292,324,356,388,421,453]; midx = pgm_read_word(kAdcNiceList + i); if (midx & 0x001F) { if (first_done) { WSContentSend_P(PSTR(",")); } WSContentSend_P(PSTR("%d"), midx); first_done = true; } } #endif // USE_ADC #endif // ESP8266 WSContentSend_P(PSTR("];")); } #ifdef ESP8266 #ifdef USE_ADC void WSContentSendAdcNiceList(uint32_t option) { char stemp[30]; // Template number and Sensor name WSContentSend_P(PSTR("os=\"")); for (uint32_t i = 0; i < ARRAY_SIZE(kAdcNiceList); i++) { // GPIO: }2'0'>None}3}2'17'>Analog}3... if (option && (1 == i)) { WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX, AGPIO(GPIO_USER), D_SENSOR_USER); // }2'15'>User}3 } uint32_t ridx = pgm_read_word(kAdcNiceList + i) & 0xFFE0; uint32_t midx = BGPIO(ridx); WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX, ridx, GetTextIndexed(stemp, sizeof(stemp), midx, kSensorNames)); } } #endif // USE_ADC #endif // ESP8266 /*-------------------------------------------------------------------------------------------*/ void HandleTemplateConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } if (Webserver->hasArg("save")) { TemplateSaveSettings(); WebRestart(1); return; } char stemp[30]; // Template number and Sensor name WebGetArg("t", stemp, sizeof(stemp)); // 0 - 69 Template number if (strlen(stemp)) { uint32_t module = atoi(stemp); uint32_t module_save = Settings.module; Settings.module = module; myio cmodule; ModuleGpios(&cmodule); gpio_flag flag = ModuleFlag(); Settings.module = module_save; WSContentBegin(200, CT_PLAIN); WSContentSend_P(PSTR("%s}1"), AnyModuleName(module).c_str()); // NAME: Generic for (uint32_t i = 0; i < ARRAY_SIZE(cmodule.io); i++) { // 17,148,29,149,7,255,255,255,138,255,139,255,255 if (!FlashPin(i)) { WSContentSend_P(PSTR("%s%d"), (i>0)?",":"", cmodule.io[i]); } } WSContentSend_P(PSTR("}1%d}1%d"), flag, Settings.user_template_base); // FLAG: 1 BASE: 17 WSContentEnd(); return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_TEMPLATE); WSContentStart_P(S_CONFIGURE_TEMPLATE); WSContentSend_P(HTTP_SCRIPT_MODULE_TEMPLATE); WSContentSend_P(HTTP_SCRIPT_TEMPLATE); WSContentSendNiceLists(1); WSContentSend_P(HTTP_SCRIPT_TEMPLATE2); #ifdef ESP8266 #ifdef USE_ADC WSContentSendAdcNiceList(1); WSContentSend_P(HTTP_SCRIPT_TEMPLATE3); #endif // USE_ADC #endif // ESP8266 WSContentSend_P(HTTP_SCRIPT_TEMPLATE4); for (uint32_t i = 0; i < sizeof(kModuleNiceList); i++) { // "}2'%d'>%s (%d)}3" - "}2'0'>Sonoff Basic (1)}3" uint32_t midx = pgm_read_byte(kModuleNiceList + i); WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_INDEX, midx, AnyModuleName(midx).c_str(), midx +1); } WSContentSend_P(HTTP_SCRIPT_TEMPLATE5); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_TEMPLATE); WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("" D_TEMPLATE_NAME "" "" D_BASE_TYPE "" "" "
")); WSContentSend_P(HTTP_TABLE100); for (uint32_t i = 0; i < MAX_GPIO_PIN; i++) { if (!FlashPin(i)) { WSContentSend_P(PSTR("" D_GPIO "%d"), ((9==i)||(10==i)) ? WebColor(COL_TEXT_WARNING) : WebColor(COL_TEXT), i, (0==i) ? " style='width:150px'" : "", i, i); WSContentSend_P(PSTR(""), i); } } WSContentSend_P(PSTR("")); gpio_flag flag = ModuleFlag(); if (flag.data) { WSContentSend_P(HTTP_FORM_TEMPLATE_FLAG); } WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } uint16_t WebGetGpioArg(uint32_t i) { char webindex[5]; // WebGetArg name snprintf_P(webindex, sizeof(webindex), PSTR("g%d"), i); char tmp[8]; // WebGetArg numbers only WebGetArg(webindex, tmp, sizeof(tmp)); // GPIO uint32_t gpio = (!strlen(tmp)) ? 0 : atoi(tmp); char webindex2[5]; // WebGetArg name snprintf_P(webindex2, sizeof(webindex2), PSTR("h%d"), i); char tmp2[8]; // WebGetArg numbers only WebGetArg(webindex2, tmp2, sizeof(tmp2)); uint32_t value2 = (!strlen(tmp2)) ? 0 : atoi(tmp2) -1; gpio += value2; return gpio; } void TemplateSaveSettings(void) { char tmp[TOPSZ]; // WebGetArg NAME and GPIO/BASE/FLAG byte value char svalue[300]; // Template command string WebGetArg("s1", tmp, sizeof(tmp)); // NAME snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_TEMPLATE " {\"" D_JSON_NAME "\":\"%s\",\"" D_JSON_GPIO "\":["), tmp); uint32_t j = 0; for (uint32_t i = 0; i < ARRAY_SIZE(Settings.user_template.gp.io); i++) { if (6 == i) { j = 9; } if (8 == i) { j = 12; } snprintf_P(svalue, sizeof(svalue), PSTR("%s%s%d"), svalue, (i>0)?",":"", WebGetGpioArg(j)); j++; } uint32_t flag = 0; char webindex[5]; // WebGetArg name for (uint32_t i = 0; i < GPIO_FLAG_USED; i++) { snprintf_P(webindex, sizeof(webindex), PSTR("c%d"), i); uint32_t state = Webserver->hasArg(webindex) << i; // FLAG flag += state; } WebGetArg("g99", tmp, sizeof(tmp)); // BASE uint32_t base = atoi(tmp) +1; snprintf_P(svalue, sizeof(svalue), PSTR("%s],\"" D_JSON_FLAG "\":%d,\"" D_JSON_BASE "\":%d}"), svalue, flag, base); ExecuteWebCommand(svalue, SRC_WEBGUI); } /*-------------------------------------------------------------------------------------------*/ void HandleModuleConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } if (Webserver->hasArg("save")) { ModuleSaveSettings(); WebRestart(1); return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_MODULE); char stemp[30]; // Sensor name uint32_t midx; myio cmodule; ModuleGpios(&cmodule); WSContentStart_P(S_CONFIGURE_MODULE); WSContentSend_P(HTTP_SCRIPT_MODULE_TEMPLATE); WSContentSend_P(PSTR("function sl(){os=\"")); uint32_t vidx = 0; for (uint32_t i = 0; i <= sizeof(kModuleNiceList); i++) { // "}2'%d'>%s (%d)}3" - "}2'255'>UserTemplate (0)}3" - "}2'0'>Sonoff Basic (1)}3" if (0 == i) { midx = USER_MODULE; vidx = 0; } else { midx = pgm_read_byte(kModuleNiceList + i -1); vidx = midx +1; } WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_INDEX, midx, AnyModuleName(midx).c_str(), vidx); } WSContentSend_P(PSTR("\";sk(%d,99);os=\""), Settings.module); WSContentSendNiceLists(0); for (uint32_t i = 0; i < ARRAY_SIZE(cmodule.io); i++) { if (ValidGPIO(i, cmodule.io[i])) { WSContentSend_P(PSTR("sk(%d,%d);"), my_module.io[i], i); // g0 - g17 } } #ifdef ESP8266 #ifdef USE_ADC WSContentSendAdcNiceList(0); WSContentSend_P(PSTR("\";sk(%d," STR(ADC0_PIN) ");"), Settings.my_gp.io[(sizeof(myio) / 2) -1]); #endif // USE_ADC #endif // ESP8266 WSContentSend_P(PSTR("}wl(sl);")); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_MODULE, AnyModuleName(MODULE).c_str()); for (uint32_t i = 0; i < ARRAY_SIZE(cmodule.io); i++) { if (ValidGPIO(i, cmodule.io[i])) { snprintf_P(stemp, 3, PINS_WEMOS +i*2); WSContentSend_P(PSTR("%s " D_GPIO "%d"), (WEMOS==my_module_type)?stemp:"", i, i, i); WSContentSend_P(PSTR(""), i); } } WSContentSend_P(PSTR("")); WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } void ModuleSaveSettings(void) { char tmp[8]; // WebGetArg numbers only WebGetArg("g99", tmp, sizeof(tmp)); uint32_t new_module = (!strlen(tmp)) ? MODULE : atoi(tmp); Settings.last_module = Settings.module; Settings.module = new_module; SetModuleType(); myio cmodule; ModuleGpios(&cmodule); String gpios = ""; for (uint32_t i = 0; i < ARRAY_SIZE(cmodule.io); i++) { if (Settings.last_module != new_module) { Settings.my_gp.io[i] = GPIO_NONE; } else { if (ValidGPIO(i, cmodule.io[i])) { Settings.my_gp.io[i] = WebGetGpioArg(i); gpios += F(", " D_GPIO ); gpios += String(i); gpios += F(" "); gpios += String(Settings.my_gp.io[i]); } } } AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_MODULE "%s " D_CMND_MODULE "%s"), ModuleName().c_str(), gpios.c_str()); } /*-------------------------------------------------------------------------------------------*/ const char kUnescapeCode[] = "&><\"\'\\"; const char kEscapeCode[] PROGMEM = "&|>|<|"|'|\"; String HtmlEscape(const String unescaped) { char escaped[10]; size_t ulen = unescaped.length(); String result = ""; for (size_t i = 0; i < ulen; i++) { char c = unescaped[i]; char *p = strchr(kUnescapeCode, c); if (p != nullptr) { result += GetTextIndexed(escaped, sizeof(escaped), p - kUnescapeCode, kEscapeCode); } else { result += c; } } return result; } // Indexed by enum wl_enc_type in file wl_definitions.h starting from -1 const char kEncryptionType[] PROGMEM = "|||" D_WPA_PSK "||" D_WPA2_PSK "|" D_WEP "||" D_NONE "|" D_AUTO; void HandleWifiConfiguration(void) { if (!HttpCheckPriviledgedAccess(!WifiIsInManagerMode())) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_WIFI); if (Webserver->hasArg("save") && HTTP_MANAGER_RESET_ONLY != Web.state) { WifiSaveSettings(); WebRestart(2); return; } WSContentStart_P(S_CONFIGURE_WIFI, !WifiIsInManagerMode()); WSContentSend_P(HTTP_SCRIPT_WIFI); WSContentSendStyle(); if (HTTP_MANAGER_RESET_ONLY != Web.state) { if (Webserver->hasArg("scan")) { #ifdef USE_EMULATION UdpDisconnect(); #endif // USE_EMULATION int n = WiFi.scanNetworks(); AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_SCAN_DONE)); if (0 == n) { AddLog_P(LOG_LEVEL_DEBUG, S_LOG_WIFI, S_NO_NETWORKS_FOUND); WSContentSend_P(S_NO_NETWORKS_FOUND); WSContentSend_P(PSTR(". " D_REFRESH_TO_SCAN_AGAIN ".")); } else { //sort networks int indices[n]; for (uint32_t i = 0; i < n; i++) { indices[i] = i; } // RSSI SORT for (uint32_t i = 0; i < n; i++) { for (uint32_t j = i + 1; j < n; j++) { if (WiFi.RSSI(indices[j]) > WiFi.RSSI(indices[i])) { std::swap(indices[i], indices[j]); } } } // remove duplicates ( must be RSSI sorted ) String cssid; for (uint32_t i = 0; i < n; i++) { if (-1 == indices[i]) { continue; } cssid = WiFi.SSID(indices[i]); uint32_t cschn = WiFi.channel(indices[i]); for (uint32_t j = i + 1; j < n; j++) { if ((cssid == WiFi.SSID(indices[j])) && (cschn == WiFi.channel(indices[j]))) { DEBUG_CORE_LOG(PSTR(D_LOG_WIFI D_DUPLICATE_ACCESSPOINT " %s"), WiFi.SSID(indices[j]).c_str()); indices[j] = -1; // set dup aps to index -1 } } } //display networks in page for (uint32_t i = 0; i < n; i++) { if (-1 == indices[i]) { continue; } // skip dups int32_t rssi = WiFi.RSSI(indices[i]); DEBUG_CORE_LOG(PSTR(D_LOG_WIFI D_SSID " %s, " D_BSSID " %s, " D_CHANNEL " %d, " D_RSSI " %d"), WiFi.SSID(indices[i]).c_str(), WiFi.BSSIDstr(indices[i]).c_str(), WiFi.channel(indices[i]), rssi); int quality = WifiGetRssiAsQuality(rssi); int auth = WiFi.encryptionType(indices[i]); char encryption[20]; WSContentSend_P(PSTR("
%s (%d) %s %d%% (%d dBm)
"), HtmlEscape(WiFi.SSID(indices[i])).c_str(), WiFi.channel(indices[i]), GetTextIndexed(encryption, sizeof(encryption), auth +1, kEncryptionType), quality, rssi ); delay(0); } WSContentSend_P(PSTR("
")); } } else { WSContentSend_P(PSTR("
")); } // As WIFI_HOSTNAME may contain %s-%04d it cannot be part of HTTP_FORM_WIFI where it will exception WSContentSend_P(HTTP_FORM_WIFI, SettingsText(SET_STASSID1), SettingsText(SET_STASSID2), WIFI_HOSTNAME, WIFI_HOSTNAME, SettingsText(SET_HOSTNAME), SettingsText(SET_CORS)); WSContentSend_P(HTTP_FORM_END); } if (WifiIsInManagerMode()) { #ifndef FIRMWARE_MINIMAL WSContentSpaceButton(BUTTON_RESTORE); WSContentButton(BUTTON_RESET_CONFIGURATION); #endif // FIRMWARE_MINIMAL WSContentSpaceButton(BUTTON_RESTART); } else { WSContentSpaceButton(BUTTON_CONFIGURATION); } WSContentStop(); } void WifiSaveSettings(void) { char tmp[TOPSZ]; // Max length is currently 150 WebGetArg("h", tmp, sizeof(tmp)); SettingsUpdateText(SET_HOSTNAME, (!strlen(tmp)) ? WIFI_HOSTNAME : tmp); if (strstr(SettingsText(SET_HOSTNAME), "%") != nullptr) { SettingsUpdateText(SET_HOSTNAME, WIFI_HOSTNAME); } WebGetArg("c", tmp, sizeof(tmp)); SettingsUpdateText(SET_CORS, (!strlen(tmp)) ? CORS_DOMAIN : tmp); WebGetArg("s1", tmp, sizeof(tmp)); SettingsUpdateText(SET_STASSID1, (!strlen(tmp)) ? STA_SSID1 : tmp); WebGetArg("s2", tmp, sizeof(tmp)); SettingsUpdateText(SET_STASSID2, (!strlen(tmp)) ? STA_SSID2 : tmp); WebGetArg("p1", tmp, sizeof(tmp)); SettingsUpdateText(SET_STAPWD1, (!strlen(tmp)) ? "" : (strlen(tmp) < 5) ? SettingsText(SET_STAPWD1) : tmp); WebGetArg("p2", tmp, sizeof(tmp)); SettingsUpdateText(SET_STAPWD2, (!strlen(tmp)) ? "" : (strlen(tmp) < 5) ? SettingsText(SET_STAPWD2) : tmp); AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_CMND_HOSTNAME " %s, " D_CMND_SSID "1 %s, " D_CMND_SSID "2 %s, " D_CMND_CORS " %s"), SettingsText(SET_HOSTNAME), SettingsText(SET_STASSID1), SettingsText(SET_STASSID2), SettingsText(SET_CORS)); } /*-------------------------------------------------------------------------------------------*/ void HandleLoggingConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_LOGGING); if (Webserver->hasArg("save")) { LoggingSaveSettings(); HandleConfiguration(); return; } WSContentStart_P(S_CONFIGURE_LOGGING); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_LOG1); char stemp1[45]; char stemp2[32]; uint8_t dlevel[4] = { LOG_LEVEL_INFO, LOG_LEVEL_INFO, LOG_LEVEL_NONE, LOG_LEVEL_NONE }; for (uint32_t idx = 0; idx < 4; idx++) { if ((2==idx) && !Settings.flag.mqtt_enabled) { continue; } // SetOption3 - Enable MQTT uint32_t llevel = (0==idx)?Settings.seriallog_level:(1==idx)?Settings.weblog_level:(2==idx)?Settings.mqttlog_level:Settings.syslog_level; WSContentSend_P(PSTR("

%s (%s)

")); } WSContentSend_P(HTTP_FORM_LOG2, SettingsText(SET_SYSLOG_HOST), Settings.syslog_port, Settings.tele_period); WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } void LoggingSaveSettings(void) { char tmp[TOPSZ]; // Max length is currently 33 WebGetArg("l0", tmp, sizeof(tmp)); SetSeriallog((!strlen(tmp)) ? SERIAL_LOG_LEVEL : atoi(tmp)); WebGetArg("l1", tmp, sizeof(tmp)); Settings.weblog_level = (!strlen(tmp)) ? WEB_LOG_LEVEL : atoi(tmp); WebGetArg("l2", tmp, sizeof(tmp)); Settings.mqttlog_level = (!strlen(tmp)) ? MQTT_LOG_LEVEL : atoi(tmp); WebGetArg("l3", tmp, sizeof(tmp)); SetSyslog((!strlen(tmp)) ? SYS_LOG_LEVEL : atoi(tmp)); WebGetArg("lh", tmp, sizeof(tmp)); SettingsUpdateText(SET_SYSLOG_HOST, (!strlen(tmp)) ? SYS_LOG_HOST : tmp); WebGetArg("lp", tmp, sizeof(tmp)); Settings.syslog_port = (!strlen(tmp)) ? SYS_LOG_PORT : atoi(tmp); WebGetArg("lt", tmp, sizeof(tmp)); Settings.tele_period = (!strlen(tmp)) ? TELE_PERIOD : atoi(tmp); if ((Settings.tele_period > 0) && (Settings.tele_period < 10)) { Settings.tele_period = 10; // Do not allow periods < 10 seconds } AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_LOG D_CMND_SERIALLOG " %d, " D_CMND_WEBLOG " %d, " D_CMND_MQTTLOG " %d, " D_CMND_SYSLOG " %d, " D_CMND_LOGHOST " %s, " D_CMND_LOGPORT " %d, " D_CMND_TELEPERIOD " %d"), Settings.seriallog_level, Settings.weblog_level, Settings.mqttlog_level, Settings.syslog_level, SettingsText(SET_SYSLOG_HOST), Settings.syslog_port, Settings.tele_period); } /*-------------------------------------------------------------------------------------------*/ void HandleOtherConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONFIGURE_OTHER); if (Webserver->hasArg("save")) { OtherSaveSettings(); WebRestart(1); return; } WSContentStart_P(S_CONFIGURE_OTHER); WSContentSendStyle(); TemplateJson(); char stemp[strlen(mqtt_data) +1]; strlcpy(stemp, mqtt_data, sizeof(stemp)); // Get JSON template WSContentSend_P(HTTP_FORM_OTHER, stemp, (USER_MODULE == Settings.module) ? " checked disabled" : "", (Settings.flag.mqtt_enabled) ? " checked" : "", // SetOption3 - Enable MQTT SettingsText(SET_FRIENDLYNAME1), SettingsText(SET_DEVICENAME)); uint32_t maxfn = (devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : (!devices_present) ? 1 : devices_present; #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { maxfn = 1; } #endif // USE_SONOFF_IFAN for (uint32_t i = 0; i < maxfn; i++) { snprintf_P(stemp, sizeof(stemp), PSTR("%d"), i +1); WSContentSend_P(PSTR("" D_FRIENDLY_NAME " %d (" FRIENDLY_NAME "%s)

"), i +1, (i) ? stemp : "", i, (i) ? stemp : "", SettingsText(SET_FRIENDLYNAME1 + i)); } #ifdef USE_EMULATION #if defined(USE_EMULATION_WEMO) || defined(USE_EMULATION_HUE) WSContentSend_P(PSTR("

 " D_EMULATION " 

")); // Keep close to Friendlynames so do not use
for (uint32_t i = 0; i < EMUL_MAX; i++) { #ifndef USE_EMULATION_WEMO if (i == EMUL_WEMO) { i++; } #endif #ifndef USE_EMULATION_HUE if (i == EMUL_HUE) { i++; } #endif if (i < EMUL_MAX) { WSContentSend_P(PSTR("%s %s
"), // Different id only used for labels i, i, (i == Settings.flag2.emulation) ? " checked" : "", GetTextIndexed(stemp, sizeof(stemp), i, kEmulationOptions), (i == EMUL_NONE) ? "" : (i == EMUL_WEMO) ? D_SINGLE_DEVICE : D_MULTI_DEVICE); } } WSContentSend_P(PSTR("

")); #endif // USE_EMULATION_WEMO || USE_EMULATION_HUE #endif // USE_EMULATION WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } void OtherSaveSettings(void) { char tmp[300]; // Needs to hold complete ESP32 template of minimal 230 chars char webindex[5]; char friendlyname[TOPSZ]; char message[LOGSZ]; WebGetArg("dn", tmp, sizeof(tmp)); SettingsUpdateText(SET_DEVICENAME, (!strlen(tmp)) ? "" : (!strcmp(tmp,"1")) ? SettingsText(SET_FRIENDLYNAME1) : tmp); WebGetArg("wp", tmp, sizeof(tmp)); SettingsUpdateText(SET_WEBPWD, (!strlen(tmp)) ? "" : (strchr(tmp,'*')) ? SettingsText(SET_WEBPWD) : tmp); Settings.flag.mqtt_enabled = Webserver->hasArg("b1"); // SetOption3 - Enable MQTT #ifdef USE_EMULATION UdpDisconnect(); #if defined(USE_EMULATION_WEMO) || defined(USE_EMULATION_HUE) WebGetArg("b2", tmp, sizeof(tmp)); Settings.flag2.emulation = (!strlen(tmp)) ? 0 : atoi(tmp); #endif // USE_EMULATION_WEMO || USE_EMULATION_HUE #endif // USE_EMULATION snprintf_P(message, sizeof(message), PSTR(D_LOG_OTHER D_MQTT_ENABLE " %s, " D_CMND_EMULATION " %d, " D_CMND_DEVICENAME " %s, " D_CMND_FRIENDLYNAME), GetStateText(Settings.flag.mqtt_enabled), Settings.flag2.emulation, SettingsText(SET_DEVICENAME)); for (uint32_t i = 0; i < MAX_FRIENDLYNAMES; i++) { snprintf_P(webindex, sizeof(webindex), PSTR("a%d"), i); WebGetArg(webindex, tmp, sizeof(tmp)); snprintf_P(friendlyname, sizeof(friendlyname), PSTR(FRIENDLY_NAME"%d"), i +1); SettingsUpdateText(SET_FRIENDLYNAME1 +i, (!strlen(tmp)) ? (i) ? friendlyname : FRIENDLY_NAME : tmp); snprintf_P(message, sizeof(message), PSTR("%s%s %s"), message, (i) ? "," : "", SettingsText(SET_FRIENDLYNAME1 +i)); } AddLog_P(LOG_LEVEL_INFO, message); WebGetArg("t1", tmp, sizeof(tmp)); if (strlen(tmp)) { // {"NAME":"12345678901234","GPIO":[255,255,255,255,255,255,255,255,255,255,255,255,255],"FLAG":255,"BASE":255} snprintf_P(message, sizeof(message), PSTR(D_CMND_BACKLOG " " D_CMND_TEMPLATE " %s%s"), tmp, (Webserver->hasArg("t2")) ? "; " D_CMND_MODULE " 0" : ""); ExecuteWebCommand(message, SRC_WEBGUI); } } /*-------------------------------------------------------------------------------------------*/ void HandleBackupConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_BACKUP_CONFIGURATION)); if (!SettingsBufferAlloc()) { return; } WiFiClient myClient = Webserver->client(); Webserver->setContentLength(sizeof(Settings)); char attachment[TOPSZ]; // char friendlyname[TOPSZ]; // snprintf_P(attachment, sizeof(attachment), PSTR("attachment; filename=Config_%s_%s.dmp"), NoAlNumToUnderscore(friendlyname, SettingsText(SET_FRIENDLYNAME1)), my_version); char hostname[sizeof(my_hostname)]; snprintf_P(attachment, sizeof(attachment), PSTR("attachment; filename=Config_%s_%s.dmp"), NoAlNumToUnderscore(hostname, my_hostname), my_version); Webserver->sendHeader(F("Content-Disposition"), attachment); WSSend(200, CT_STREAM, ""); uint32_t cfg_crc32 = Settings.cfg_crc32; Settings.cfg_crc32 = GetSettingsCrc32(); // Calculate crc (again) as it might be wrong when savedata = 0 (#3918) memcpy(settings_buffer, &Settings, sizeof(Settings)); if (Web.config_xor_on_set) { for (uint32_t i = 2; i < sizeof(Settings); i++) { settings_buffer[i] ^= (Web.config_xor_on_set +i); } } myClient.write((const char*)settings_buffer, sizeof(Settings)); SettingsBufferFree(); Settings.cfg_crc32 = cfg_crc32; // Restore crc in case savedata = 0 to make sure settings will be noted as changed } /*-------------------------------------------------------------------------------------------*/ void HandleResetConfiguration(void) { if (!HttpCheckPriviledgedAccess(!WifiIsInManagerMode())) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_RESET_CONFIGURATION); WSContentStart_P(S_RESET_CONFIGURATION, !WifiIsInManagerMode()); WSContentSendStyle(); WSContentSend_P(PSTR("
" D_CONFIGURATION_RESET "
")); WSContentSend_P(HTTP_MSG_RSTRT); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); char command[CMDSZ]; snprintf_P(command, sizeof(command), PSTR(D_CMND_RESET " 1")); ExecuteWebCommand(command, SRC_WEBGUI); } void HandleRestoreConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_RESTORE_CONFIGURATION); WSContentStart_P(S_RESTORE_CONFIGURATION); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_RST); WSContentSend_P(HTTP_FORM_RST_UPG, D_RESTORE); if (WifiIsInManagerMode()) { WSContentSpaceButton(BUTTON_MAIN); } else { WSContentSpaceButton(BUTTON_CONFIGURATION); } WSContentStop(); Web.upload_error = 0; Web.upload_file_type = UPL_SETTINGS; } /*-------------------------------------------------------------------------------------------*/ void HandleInformation(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_INFORMATION); char stopic[TOPSZ]; int freeMem = ESP_getFreeHeap(); WSContentStart_P(S_INFORMATION); // Save 1k of code space replacing table html with javascript replace codes // }1 = // }2 = WSContentSend_P(HTTP_SCRIPT_INFO_BEGIN); WSContentSend_P(PSTR("
")); WSContentSend_P(PSTR(D_PROGRAM_VERSION "}2%s%s"), my_version, my_image); WSContentSend_P(PSTR("}1" D_BUILD_DATE_AND_TIME "}2%s"), GetBuildDateAndTime().c_str()); WSContentSend_P(PSTR("}1" D_CORE_AND_SDK_VERSION "}2" ARDUINO_CORE_RELEASE "/%s"), ESP.getSdkVersion()); WSContentSend_P(PSTR("}1" D_UPTIME "}2%s"), GetUptime().c_str()); #ifdef ESP8266 WSContentSend_P(PSTR("}1" D_FLASH_WRITE_COUNT "}2%d at 0x%X"), Settings.save_flag, GetSettingsAddress()); #else WSContentSend_P(PSTR("}1" D_FLASH_WRITE_COUNT "}2%d"), Settings.save_flag); #endif WSContentSend_P(PSTR("}1" D_BOOT_COUNT "}2%d"), Settings.bootcount); WSContentSend_P(PSTR("}1" D_RESTART_REASON "}2%s"), GetResetReason().c_str()); uint32_t maxfn = (devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : devices_present; #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { maxfn = 1; } #endif // USE_SONOFF_IFAN for (uint32_t i = 0; i < maxfn; i++) { WSContentSend_P(PSTR("}1" D_FRIENDLY_NAME " %d}2%s"), i +1, SettingsText(SET_FRIENDLYNAME1 +i)); } WSContentSend_P(PSTR("}1}2 ")); // Empty line #ifdef ESP32 #ifdef USE_ETHERNET if (static_cast(EthernetLocalIP()) != 0) { WSContentSend_P(PSTR("}1" D_HOSTNAME "}2%s%s"), EthernetHostname(), (Mdns.begun) ? ".local" : ""); WSContentSend_P(PSTR("}1" D_MAC_ADDRESS "}2%s"), EthernetMacAddress().c_str()); WSContentSend_P(PSTR("}1" D_IP_ADDRESS " (eth)}2%s"), EthernetLocalIP().toString().c_str()); WSContentSend_P(PSTR("}1
}2
")); } #endif #endif if (Settings.flag4.network_wifi) { int32_t rssi = WiFi.RSSI(); WSContentSend_P(PSTR("}1" D_AP "%d " D_SSID " (" D_RSSI ")}2%s (%d%%, %d dBm)"), Settings.sta_active +1, HtmlEscape(SettingsText(SET_STASSID1 + Settings.sta_active)).c_str(), WifiGetRssiAsQuality(rssi), rssi); WSContentSend_P(PSTR("}1" D_HOSTNAME "}2%s%s"), my_hostname, (Mdns.begun) ? ".local" : ""); #if LWIP_IPV6 String ipv6_addr = WifiGetIPv6(); if (ipv6_addr != "") { WSContentSend_P(PSTR("}1 IPv6 Address }2%s"), ipv6_addr.c_str()); } #endif if (static_cast(WiFi.localIP()) != 0) { WSContentSend_P(PSTR("}1" D_MAC_ADDRESS "}2%s"), WiFi.macAddress().c_str()); WSContentSend_P(PSTR("}1" D_IP_ADDRESS " (wifi)}2%s"), WiFi.localIP().toString().c_str()); WSContentSend_P(PSTR("}1
}2
")); } } if (!global_state.network_down) { WSContentSend_P(PSTR("}1" D_GATEWAY "}2%s"), IPAddress(Settings.ip_address[1]).toString().c_str()); WSContentSend_P(PSTR("}1" D_SUBNET_MASK "}2%s"), IPAddress(Settings.ip_address[2]).toString().c_str()); WSContentSend_P(PSTR("}1" D_DNS_SERVER "}2%s"), IPAddress(Settings.ip_address[3]).toString().c_str()); } if ((WiFi.getMode() >= WIFI_AP) && (static_cast(WiFi.softAPIP()) != 0)) { WSContentSend_P(PSTR("}1
}2
")); WSContentSend_P(PSTR("}1" D_MAC_ADDRESS "}2%s"), WiFi.softAPmacAddress().c_str()); WSContentSend_P(PSTR("}1" D_IP_ADDRESS " (AP)}2%s"), WiFi.softAPIP().toString().c_str()); WSContentSend_P(PSTR("}1" D_GATEWAY "}2%s"), WiFi.softAPIP().toString().c_str()); } WSContentSend_P(PSTR("}1}2 ")); // Empty line if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT WSContentSend_P(PSTR("}1" D_MQTT_HOST "}2%s"), SettingsText(SET_MQTT_HOST)); WSContentSend_P(PSTR("}1" D_MQTT_PORT "}2%d"), Settings.mqtt_port); #ifdef USE_MQTT_TLS WSContentSend_P(PSTR("}1" D_MQTT_TLS_ENABLE "}2%s"), Settings.flag4.mqtt_tls ? PSTR(D_ENABLED) : PSTR(D_DISABLED)); #endif // USE_MQTT_TLS WSContentSend_P(PSTR("}1" D_MQTT_USER "}2%s"), SettingsText(SET_MQTT_USER)); WSContentSend_P(PSTR("}1" D_MQTT_CLIENT "}2%s"), mqtt_client); WSContentSend_P(PSTR("}1" D_MQTT_TOPIC "}2%s"), SettingsText(SET_MQTT_TOPIC)); uint32_t real_index = SET_MQTT_GRP_TOPIC; for (uint32_t i = 0; i < MAX_GROUP_TOPICS; i++) { if (1 == i) { real_index = SET_MQTT_GRP_TOPIC2 -1; } if (strlen(SettingsText(real_index +i))) { WSContentSend_P(PSTR("}1" D_MQTT_GROUP_TOPIC " %d}2%s"), 1 +i, GetGroupTopic_P(stopic, "", real_index +i)); } } WSContentSend_P(PSTR("}1" D_MQTT_FULL_TOPIC "}2%s"), GetTopic_P(stopic, CMND, mqtt_topic, "")); WSContentSend_P(PSTR("}1" D_MQTT " " D_FALLBACK_TOPIC "}2%s"), GetFallbackTopic_P(stopic, "")); WSContentSend_P(PSTR("}1" D_MQTT_NO_RETAIN "}2%s"), Settings.flag4.mqtt_no_retain ? PSTR(D_ENABLED) : PSTR(D_DISABLED)); } else { WSContentSend_P(PSTR("}1" D_MQTT "}2" D_DISABLED)); } WSContentSend_P(PSTR("}1}2 ")); // Empty line #ifdef USE_EMULATION WSContentSend_P(PSTR("}1" D_EMULATION "}2%s"), GetTextIndexed(stopic, sizeof(stopic), Settings.flag2.emulation, kEmulationOptions)); #else WSContentSend_P(PSTR("}1" D_EMULATION "}2" D_DISABLED)); #endif // USE_EMULATION #ifdef USE_DISCOVERY WSContentSend_P(PSTR("}1" D_MDNS_DISCOVERY "}2%s"), (Settings.flag3.mdns_enabled) ? D_ENABLED : D_DISABLED); // SetOption55 - Control mDNS service if (Settings.flag3.mdns_enabled) { // SetOption55 - Control mDNS service #ifdef WEBSERVER_ADVERTISE WSContentSend_P(PSTR("}1" D_MDNS_ADVERTISE "}2" D_WEB_SERVER)); #else WSContentSend_P(PSTR("}1" D_MDNS_ADVERTISE "}2" D_DISABLED)); #endif // WEBSERVER_ADVERTISE } #else WSContentSend_P(PSTR("}1" D_MDNS_DISCOVERY "}2" D_DISABLED)); #endif // USE_DISCOVERY WSContentSend_P(PSTR("}1}2 ")); // Empty line WSContentSend_P(PSTR("}1" D_ESP_CHIP_ID "}2%d"), ESP_getChipId()); #ifdef ESP8266 WSContentSend_P(PSTR("}1" D_FLASH_CHIP_ID "}20x%06X"), ESP.getFlashChipId()); #endif WSContentSend_P(PSTR("}1" D_FLASH_CHIP_SIZE "}2%dkB"), ESP.getFlashChipRealSize() / 1024); WSContentSend_P(PSTR("}1" D_PROGRAM_FLASH_SIZE "}2%dkB"), ESP.getFlashChipSize() / 1024); WSContentSend_P(PSTR("}1" D_PROGRAM_SIZE "}2%dkB"), ESP_getSketchSize() / 1024); WSContentSend_P(PSTR("}1" D_FREE_PROGRAM_SPACE "}2%dkB"), ESP.getFreeSketchSpace() / 1024); WSContentSend_P(PSTR("}1" D_FREE_MEMORY "}2%dkB"), freeMem / 1024); #ifdef ESP32 if (psramFound()) { WSContentSend_P(PSTR("}1" D_PSR_MAX_MEMORY "}2%dkB"), ESP.getPsramSize() / 1024); WSContentSend_P(PSTR("}1" D_PSR_FREE_MEMORY "}2%dkB"), ESP.getFreePsram() / 1024); } #endif WSContentSend_P(PSTR("
")); WSContentSend_P(HTTP_SCRIPT_INFO_END); WSContentSendStyle(); // WSContentSend_P(PSTR("
 Information ")); WSContentSend_P(PSTR("" "
")); // WSContentSend_P(PSTR("
")); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); } #endif // Not FIRMWARE_MINIMAL /*-------------------------------------------------------------------------------------------*/ void HandleUpgradeFirmware(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_FIRMWARE_UPGRADE); WSContentStart_P(S_FIRMWARE_UPGRADE); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_UPG, SettingsText(SET_OTAURL)); WSContentSend_P(HTTP_FORM_RST_UPG, D_UPGRADE); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); Web.upload_error = 0; Web.upload_file_type = UPL_TASMOTA; } void HandleUpgradeFirmwareStart(void) { if (!HttpCheckPriviledgedAccess()) { return; } char command[TOPSZ + 10]; // OtaUrl AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_UPGRADE_STARTED)); WifiConfigCounter(); char otaurl[TOPSZ]; WebGetArg("o", otaurl, sizeof(otaurl)); if (strlen(otaurl)) { snprintf_P(command, sizeof(command), PSTR(D_CMND_OTAURL " %s"), otaurl); ExecuteWebCommand(command, SRC_WEBGUI); } WSContentStart_P(S_INFORMATION); WSContentSend_P(HTTP_SCRIPT_RELOAD_TIME, HTTP_OTA_RESTART_RECONNECT_TIME); WSContentSendStyle(); WSContentSend_P(PSTR("
" D_UPGRADE_STARTED " ...
")); WSContentSend_P(HTTP_MSG_RSTRT); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); snprintf_P(command, sizeof(command), PSTR(D_CMND_UPGRADE " 1")); ExecuteWebCommand(command, SRC_WEBGUI); } void HandleUploadDone(void) { if (!HttpCheckPriviledgedAccess()) { return; } #if defined(USE_ZIGBEE) && defined(USE_ZIGBEE_EZSP) if (!Web.upload_error) { // GUI xmodem if (ZigbeeUploadOtaReady()) { HandleZigbeeXfer(); return; } } #endif AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_UPLOAD_DONE)); char error[100]; WifiConfigCounter(); restart_flag = 0; MqttRetryCounter(0); #ifdef USE_COUNTER CounterInterruptDisable(false); #endif // USE_COUNTER WSContentStart_P(S_INFORMATION); if (!Web.upload_error) { uint32_t javascript_settimeout = HTTP_OTA_RESTART_RECONNECT_TIME; #if defined(USE_ZIGBEE) && defined(USE_ZIGBEE_EZSP) if (ZigbeeUploadFinish()) { javascript_settimeout = 10000; // Refesh main web ui after transfer upgrade } #endif WSContentSend_P(HTTP_SCRIPT_RELOAD_TIME, javascript_settimeout); // Refesh main web ui after OTA upgrade } WSContentSendStyle(); WSContentSend_P(PSTR("
" D_UPLOAD " " D_FAILED "

"), WebColor(COL_TEXT_WARNING)); #ifdef USE_RF_FLASH if (Web.upload_error < 15) { #else if ((Web.upload_error < 10) || (14 == Web.upload_error)) { if (14 == Web.upload_error) { Web.upload_error = 10; } #endif GetTextIndexed(error, sizeof(error), Web.upload_error -1, kUploadErrors); } else { snprintf_P(error, sizeof(error), PSTR(D_UPLOAD_ERROR_CODE " %d"), Web.upload_error); } WSContentSend_P(error); DEBUG_CORE_LOG(PSTR("UPL: %s"), error); stop_flash_rotate = Settings.flag.stop_flash_rotate; // SetOption12 - Switch between dynamic or fixed slot flash save location } else { WSContentSend_P(PSTR("%06x'>" D_SUCCESSFUL "
"), WebColor(COL_TEXT_SUCCESS)); restart_flag = 2; // Always restart to re-enable disabled features during update #ifdef USE_TASMOTA_CLIENT if (TasmotaClient_GetFlagFlashing()) { WSContentSend_P(PSTR("
" D_TRANSFER_STARTED " ...
")); restart_flag = 0; // Hold restart as code still needs to be transferred to Atmega } #endif // USE_TASMOTA_CLIENT if (restart_flag) { WSContentSend_P(HTTP_MSG_RSTRT); ShowWebSource(SRC_WEBGUI); } } SettingsBufferFree(); WSContentSend_P(PSTR("

")); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); #ifdef USE_TASMOTA_CLIENT if (TasmotaClient_GetFlagFlashing()) { TasmotaClient_Flash(); } #endif } void HandleUploadLoop(void) { // Based on ESP8266HTTPUpdateServer.cpp uses ESP8266WebServer Parsing.cpp and Cores Updater.cpp (Update) bool _serialoutput = (LOG_LEVEL_DEBUG <= seriallog_level); if (HTTP_USER == Web.state) { return; } if (Web.upload_error) { if (UPL_TASMOTA == Web.upload_file_type) { Update.end(); } return; } HTTPUpload& upload = Webserver->upload(); // ***** Step1: Start upload file if (UPLOAD_FILE_START == upload.status) { restart_flag = 60; if (0 == upload.filename.c_str()[0]) { Web.upload_error = 1; // No file selected return; } SettingsSave(1); // Free flash for upload AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_UPLOAD D_FILE " %s ..."), upload.filename.c_str()); if (UPL_SETTINGS == Web.upload_file_type) { if (!SettingsBufferAlloc()) { Web.upload_error = 2; // Not enough space return; } } else { MqttRetryCounter(60); #ifdef USE_COUNTER CounterInterruptDisable(true); // Prevent OTA failures on 100Hz counter interrupts #endif // USE_COUNTER #ifdef USE_EMULATION UdpDisconnect(); #endif // USE_EMULATION #ifdef USE_ARILUX_RF AriluxRfDisable(); // Prevent restart exception on Arilux Interrupt routine #endif // USE_ARILUX_RF if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT MqttDisconnect(); } uint32_t maxSketchSpace = (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000; if (!Update.begin(maxSketchSpace)) { //start with max available size // if (_serialoutput) Update.printError(Serial); // if (Update.getError() == UPDATE_ERROR_BOOTSTRAP) { // if (_serialoutput) Serial.println("Device still in UART update mode, perform powercycle"); // } Web.upload_error = 2; // Not enough space return; } } Web.upload_progress_dot_count = 0; } // ***** Step2: Write upload file else if (!Web.upload_error && (UPLOAD_FILE_WRITE == upload.status)) { if (0 == upload.totalSize) { if (UPL_SETTINGS == Web.upload_file_type) { Web.config_block_count = 0; } else { #if defined(USE_ZIGBEE) && defined(USE_ZIGBEE_EZSP) #ifdef ESP8266 if ((SONOFF_ZB_BRIDGE == my_module_type) && (upload.buf[0] == 0xEB)) { // Check if this is a Zigbee bridge FW file #else // ESP32 if (PinUsed(GPIO_ZIGBEE_RX) && PinUsed(GPIO_ZIGBEE_TX) && (upload.buf[0] == 0xEB)) { // Check if this is a Zigbee bridge FW file #endif // ESP8266 or ESP32 Update.end(); // End esp8266 update session Web.upload_file_type = UPL_EFR32; Web.upload_error = ZigbeeUploadInit(); // 15 if (Web.upload_error != 0) { return; } } else #endif // USE_ZIGBEE and USE_ZIGBEE_EZSP #ifdef USE_RF_FLASH if ((SONOFF_BRIDGE == my_module_type) && (upload.buf[0] == ':')) { // Check if this is a RF bridge FW file Update.end(); // End esp8266 update session Web.upload_file_type = UPL_EFM8BB1; Web.upload_error = SnfBrUpdateInit(); // 10, 11 if (Web.upload_error != 0) { return; } } else #endif // USE_RF_FLASH #ifdef USE_TASMOTA_CLIENT if (TasmotaClient_Available() && (upload.buf[0] == ':')) { // Check if this is a ARDUINO CLIENT hex file Update.end(); // End esp8266 update session Web.upload_file_type = UPL_TASMOTACLIENT; Web.upload_error = TasmotaClient_UpdateInit(); // 0 if (Web.upload_error != 0) { return; } } else #endif { if ((upload.buf[0] != 0xE9) && (upload.buf[0] != 0x1F)) { // 0x1F is gzipped 0xE9 Web.upload_error = 3; // Magic byte is not 0xE9 return; } if (0xE9 == upload.buf[0]) { uint32_t bin_flash_size = ESP.magicFlashChipSize((upload.buf[3] & 0xf0) >> 4); if (bin_flash_size > ESP.getFlashChipRealSize()) { Web.upload_error = 4; // Program flash size is larger than real flash size return; } // upload.buf[2] = 3; // Force DOUT - ESP8285 } } AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_UPLOAD "File type %d"), Web.upload_file_type); } } if (UPL_SETTINGS == Web.upload_file_type) { if (!Web.upload_error) { if (upload.currentSize > (sizeof(Settings) - (Web.config_block_count * HTTP_UPLOAD_BUFLEN))) { Web.upload_error = 9; // File too large return; } memcpy(settings_buffer + (Web.config_block_count * HTTP_UPLOAD_BUFLEN), upload.buf, upload.currentSize); Web.config_block_count++; } } #if defined(USE_ZIGBEE) && defined(USE_ZIGBEE_EZSP) else if (UPL_EFR32 == Web.upload_file_type) { // Write buffers to MCU EFR32 if (!ZigbeeUploadWriteBuffer(upload.buf, upload.currentSize)) { Web.upload_error = 9; // File too large return; } } #endif // USE_ZIGBEE and USE_ZIGBEE_EZSP #ifdef USE_RF_FLASH else if (UPL_EFM8BB1 == Web.upload_file_type) { if (efm8bb1_update != nullptr) { // We have carry over data since last write, i. e. a start but not an end ssize_t result = rf_glue_remnant_with_new_data_and_write(efm8bb1_update, upload.buf, upload.currentSize); free(efm8bb1_update); efm8bb1_update = nullptr; if (result != 0) { Web.upload_error = abs(result); // 2 = Not enough space, 8 = File invalid, 12, 13 return; } } ssize_t result = rf_search_and_write(upload.buf, upload.currentSize); if (result < 0) { Web.upload_error = abs(result); // 8, 12, 13 return; } else if (result > 0) { if ((size_t)result > upload.currentSize) { // Offset is larger than the buffer supplied, this should not happen Web.upload_error = 9; // File too large - Failed to decode RF firmware return; } // A remnant has been detected, allocate data for it plus a null termination byte size_t remnant_sz = upload.currentSize - result; efm8bb1_update = (uint8_t *) malloc(remnant_sz + 1); if (efm8bb1_update == nullptr) { Web.upload_error = 2; // Not enough space - Unable to allocate memory to store new RF firmware return; } memcpy(efm8bb1_update, upload.buf + result, remnant_sz); // Add null termination at the end of of remnant buffer efm8bb1_update[remnant_sz] = '\0'; } } #endif // USE_RF_FLASH #ifdef USE_TASMOTA_CLIENT else if (UPL_TASMOTACLIENT == Web.upload_file_type) { TasmotaClient_WriteBuffer(upload.buf, upload.currentSize); } #endif else { // firmware if (!Web.upload_error && (Update.write(upload.buf, upload.currentSize) != upload.currentSize)) { Web.upload_error = 5; // Upload buffer miscompare return; } if (_serialoutput) { Serial.printf("."); Web.upload_progress_dot_count++; if (!(Web.upload_progress_dot_count % 80)) { Serial.println(); } } } } // ***** Step3: Finish upload file else if(!Web.upload_error && (UPLOAD_FILE_END == upload.status)) { if (_serialoutput && (Web.upload_progress_dot_count % 80)) { Serial.println(); } if (UPL_SETTINGS == Web.upload_file_type) { if (Web.config_xor_on_set) { for (uint32_t i = 2; i < sizeof(Settings); i++) { settings_buffer[i] ^= (Web.config_xor_on_set +i); } } bool valid_settings = false; unsigned long buffer_version = settings_buffer[11] << 24 | settings_buffer[10] << 16 | settings_buffer[9] << 8 | settings_buffer[8]; if (buffer_version > 0x06000000) { uint32_t buffer_size = settings_buffer[3] << 8 | settings_buffer[2]; if (buffer_version > 0x0606000A) { uint32_t buffer_crc32 = settings_buffer[4095] << 24 | settings_buffer[4094] << 16 | settings_buffer[4093] << 8 | settings_buffer[4092]; valid_settings = (GetCfgCrc32(settings_buffer, buffer_size -4) == buffer_crc32); } else { uint16_t buffer_crc16 = settings_buffer[15] << 8 | settings_buffer[14]; valid_settings = (GetCfgCrc16(settings_buffer, buffer_size) == buffer_crc16); } } else { valid_settings = (settings_buffer[0] == CONFIG_FILE_SIGN); } if (valid_settings) { #ifdef ESP8266 valid_settings = (0 == settings_buffer[0xF36]); // Settings.config_version #endif // ESP8266 #ifdef ESP32 valid_settings = (1 == settings_buffer[0xF36]); // Settings.config_version #endif // ESP32 } if (valid_settings) { SettingsDefaultSet2(); memcpy((char*)&Settings +16, settings_buffer +16, sizeof(Settings) -16); Settings.version = buffer_version; // Restore version and auto upgrade after restart SettingsBufferFree(); } else { Web.upload_error = 8; // File invalid return; } } #if defined(USE_ZIGBEE) && defined(USE_ZIGBEE_EZSP) else if (UPL_EFR32 == Web.upload_file_type) { // Zigbee FW upload to ESP8266 flash is done ZigbeeUploadDone(); // Signal upload done and ready for delayed upload to MCU EFR32 Web.upload_file_type = UPL_TASMOTA; } #endif #ifdef USE_RF_FLASH else if (UPL_EFM8BB1 == Web.upload_file_type) { // RF FW flash done Web.upload_file_type = UPL_TASMOTA; } #endif // USE_RF_FLASH #ifdef USE_TASMOTA_CLIENT else if (UPL_TASMOTACLIENT == Web.upload_file_type) { // Done writing the hex to SPI flash TasmotaClient_SetFlagFlashing(true); // So we know on upload success page if it needs to flash hex or do a normal restart Web.upload_file_type = UPL_TASMOTA; } #endif else { if (!Update.end(true)) { // true to set the size to the current progress if (_serialoutput) { Update.printError(Serial); } Web.upload_error = 6; // Upload failed. Enable logging 3 return; } if (!VersionCompatible()) { Web.upload_error = 14; // Not compatible return; } } if (!Web.upload_error) { AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_UPLOAD D_SUCCESSFUL " %u bytes"), upload.totalSize); } } // ***** Step4: Abort upload file else if (UPLOAD_FILE_ABORTED == upload.status) { restart_flag = 0; MqttRetryCounter(0); #ifdef USE_COUNTER CounterInterruptDisable(false); #endif // USE_COUNTER Web.upload_error = 7; // Upload aborted if (UPL_TASMOTA == Web.upload_file_type) { Update.end(); } } delay(0); } /*-------------------------------------------------------------------------------------------*/ void HandlePreflightRequest(void) { HttpHeaderCors(); Webserver->sendHeader(F("Access-Control-Allow-Methods"), F("GET, POST")); Webserver->sendHeader(F("Access-Control-Allow-Headers"), F("authorization")); WSSend(200, CT_HTML, ""); } /*-------------------------------------------------------------------------------------------*/ void HandleHttpCommand(void) { if (!HttpCheckPriviledgedAccess(false)) { return; } AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_COMMAND)); if (strlen(SettingsText(SET_WEBPWD))) { char tmp1[33]; WebGetArg("user", tmp1, sizeof(tmp1)); char tmp2[strlen(SettingsText(SET_WEBPWD)) +1]; WebGetArg("password", tmp2, sizeof(tmp2)); if (!(!strcmp(tmp1, WEB_USERNAME) && !strcmp(tmp2, SettingsText(SET_WEBPWD)))) { WSContentBegin(401, CT_JSON); WSContentSend_P(PSTR("{\"" D_RSLT_WARNING "\":\"" D_NEED_USER_AND_PASSWORD "\"}")); WSContentEnd(); return; } } WSContentBegin(200, CT_JSON); uint32_t curridx = web_log_index; String svalue = Webserver->arg("cmnd"); if (svalue.length() && (svalue.length() < MQTT_MAX_PACKET_SIZE)) { ExecuteWebCommand((char*)svalue.c_str(), SRC_WEBCOMMAND); if (web_log_index != curridx) { uint32_t counter = curridx; WSContentSend_P(PSTR("{")); bool cflg = false; do { char* tmp; size_t len; GetLog(counter, &tmp, &len); if (len) { // [14:49:36 MQTT: stat/wemos5/RESULT = {"POWER":"OFF"}] > [{"POWER":"OFF"}] char* JSON = (char*)memchr(tmp, '{', len); if (JSON) { // Is it a JSON message (and not only [15:26:08 MQT: stat/wemos5/POWER = O]) size_t JSONlen = len - (JSON - tmp); if (JSONlen > sizeof(mqtt_data)) { JSONlen = sizeof(mqtt_data); } char stemp[JSONlen]; strlcpy(stemp, JSON +1, JSONlen -2); WSContentSend_P(PSTR("%s%s"), (cflg) ? "," : "", stemp); cflg = true; } } counter++; counter &= 0xFF; if (!counter) counter++; // Skip 0 as it is not allowed } while (counter != web_log_index); WSContentSend_P(PSTR("}")); } else { WSContentSend_P(PSTR("{\"" D_RSLT_WARNING "\":\"" D_ENABLE_WEBLOG_FOR_RESPONSE "\"}")); } } else { WSContentSend_P(PSTR("{\"" D_RSLT_WARNING "\":\"" D_ENTER_COMMAND " cmnd=\"}")); } WSContentEnd(); } /*-------------------------------------------------------------------------------------------*/ void HandleConsole(void) { if (!HttpCheckPriviledgedAccess()) { return; } if (Webserver->hasArg("c2")) { // Console refresh requested HandleConsoleRefresh(); return; } AddLog_P(LOG_LEVEL_DEBUG, S_LOG_HTTP, S_CONSOLE); WSContentStart_P(S_CONSOLE); WSContentSend_P(HTTP_SCRIPT_CONSOL, Settings.web_refresh); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_CMND); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); } void HandleConsoleRefresh(void) { bool cflg = true; uint32_t counter = 0; // Initial start, should never be 0 again String svalue = Webserver->arg("c1"); if (svalue.length() && (svalue.length() < MQTT_MAX_PACKET_SIZE)) { AddLog_P2(LOG_LEVEL_INFO, PSTR(D_LOG_COMMAND "%s"), svalue.c_str()); ExecuteWebCommand((char*)svalue.c_str(), SRC_WEBCONSOLE); } char stmp[8]; WebGetArg("c2", stmp, sizeof(stmp)); if (strlen(stmp)) { counter = atoi(stmp); } WSContentBegin(200, CT_PLAIN); WSContentSend_P(PSTR("%d}1%d}1"), web_log_index, Web.reset_web_log_flag); if (!Web.reset_web_log_flag) { counter = 0; Web.reset_web_log_flag = true; } if (counter != web_log_index) { if (!counter) { counter = web_log_index; cflg = false; } do { char* tmp; size_t len; GetLog(counter, &tmp, &len); if (len) { if (len > sizeof(mqtt_data) -2) { len = sizeof(mqtt_data); } char stemp[len +1]; strlcpy(stemp, tmp, len); WSContentSend_P(PSTR("%s%s"), (cflg) ? "\n" : "", stemp); cflg = true; } counter++; counter &= 0xFF; if (!counter) { counter++; } // Skip log index 0 as it is not allowed } while (counter != web_log_index); } WSContentSend_P(PSTR("}1")); WSContentEnd(); } /********************************************************************************************/ void HandleNotFound(void) { // AddLog_P2(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP "Not found (%s)"), Webserver->uri().c_str()); if (CaptivePortal()) { return; } // If captive portal redirect instead of displaying the error page. #ifdef USE_EMULATION #ifdef USE_EMULATION_HUE String path = Webserver->uri(); if ((EMUL_HUE == Settings.flag2.emulation) && (path.startsWith("/api"))) { HandleHueApi(&path); } else #endif // USE_EMULATION_HUE #endif // USE_EMULATION { WSContentBegin(404, CT_PLAIN); WSContentSend_P(PSTR(D_FILE_NOT_FOUND "\n\nURI: %s\nMethod: %s\nArguments: %d\n"), Webserver->uri().c_str(), (Webserver->method() == HTTP_GET) ? "GET" : "POST", Webserver->args()); for (uint32_t i = 0; i < Webserver->args(); i++) { WSContentSend_P(PSTR(" %s: %s\n"), Webserver->argName(i).c_str(), Webserver->arg(i).c_str()); } WSContentEnd(); } } /* Redirect to captive portal if we got a request for another domain. Return true in that case so the page handler do not try to handle the request again. */ bool CaptivePortal(void) { // Possible hostHeader: connectivitycheck.gstatic.com or 192.168.4.1 if ((WifiIsInManagerMode()) && !ValidIpAddress(Webserver->hostHeader().c_str())) { AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_REDIRECTED)); Webserver->sendHeader(F("Location"), String("http://") + Webserver->client().localIP().toString(), true); WSSend(302, CT_PLAIN, ""); // Empty content inhibits Content-length header so we have to close the socket ourselves. Webserver->client().stop(); // Stop is needed because we sent no content length return true; } return false; } /*********************************************************************************************/ String UrlEncode(const String& text) { const char hex[] = "0123456789ABCDEF"; String encoded = ""; int len = text.length(); int i = 0; while (i < len) { char decodedChar = text.charAt(i++); /* if (('a' <= decodedChar && decodedChar <= 'z') || ('A' <= decodedChar && decodedChar <= 'Z') || ('0' <= decodedChar && decodedChar <= '9') || ('=' == decodedChar)) { encoded += decodedChar; } else { encoded += '%'; encoded += hex[decodedChar >> 4]; encoded += hex[decodedChar & 0xF]; } */ if ((' ' == decodedChar) || ('+' == decodedChar)) { encoded += '%'; encoded += hex[decodedChar >> 4]; encoded += hex[decodedChar & 0xF]; } else { encoded += decodedChar; } } return encoded; } int WebSend(char *buffer) { // [tasmota] POWER1 ON --> Sends http://tasmota/cm?cmnd=POWER1 ON // [192.168.178.86:80,admin:joker] POWER1 ON --> Sends http://hostname:80/cm?user=admin&password=joker&cmnd=POWER1 ON // [tasmota] /any/link/starting/with/a/slash.php?log=123 --> Sends http://tasmota/any/link/starting/with/a/slash.php?log=123 // [tasmota,admin:joker] /any/link/starting/with/a/slash.php?log=123 --> Sends http://tasmota/any/link/starting/with/a/slash.php?log=123 char *host; char *user; char *password; char *command; int status = 1; // Wrong parameters // buffer = | [ 192.168.178.86 : 80 , admin : joker ] POWER1 ON | host = strtok_r(buffer, "]", &command); // host = | [ 192.168.178.86 : 80 , admin : joker |, command = | POWER1 ON | if (host && command) { RemoveSpace(host); // host = |[192.168.178.86:80,admin:joker| host++; // host = |192.168.178.86:80,admin:joker| - Skip [ host = strtok_r(host, ",", &user); // host = |192.168.178.86:80|, user = |admin:joker| String url = F("http://"); // url = |http://| url += host; // url = |http://192.168.178.86:80| command = Trim(command); // command = |POWER1 ON| or |/any/link/starting/with/a/slash.php?log=123| if (command[0] != '/') { url += F("/cm?"); // url = |http://192.168.178.86/cm?| if (user) { user = strtok_r(user, ":", &password); // user = |admin|, password = |joker| if (user && password) { char userpass[200]; snprintf_P(userpass, sizeof(userpass), PSTR("user=%s&password=%s&"), user, password); url += userpass; // url = |http://192.168.178.86/cm?user=admin&password=joker&| } } url += F("cmnd="); // url = |http://192.168.178.86/cm?cmnd=| or |http://192.168.178.86/cm?user=admin&password=joker&cmnd=| } url += command; // url = |http://192.168.178.86/cm?cmnd=POWER1 ON| DEBUG_CORE_LOG(PSTR("WEB: Uri |%s|"), url.c_str()); WiFiClient http_client; HTTPClient http; if (http.begin(http_client, UrlEncode(url))) { // UrlEncode(url) = |http://192.168.178.86/cm?cmnd=POWER1%20ON| int http_code = http.GET(); // Start connection and send HTTP header if (http_code > 0) { // http_code will be negative on error if (http_code == HTTP_CODE_OK || http_code == HTTP_CODE_MOVED_PERMANENTLY) { #ifdef USE_WEBSEND_RESPONSE // Return received data to the user - Adds 900+ bytes to the code const char* read = http.getString().c_str(); // File found at server - may need lot of ram or trigger out of memory! uint32_t j = 0; char text = '.'; while (text != '\0') { text = *read++; if (text > 31) { // Remove control characters like linefeed mqtt_data[j++] = text; if (j == sizeof(mqtt_data) -2) { break; } } } mqtt_data[j] = '\0'; MqttPublishPrefixTopic_P(RESULT_OR_STAT, PSTR(D_CMND_WEBSEND)); #ifdef USE_SCRIPT extern uint8_t tasm_cmd_activ; // recursive call must be possible in this case tasm_cmd_activ=0; XdrvRulesProcess(); #endif // USE_SCRIPT #endif // USE_WEBSEND_RESPONSE } status = 0; // No error - Done } else { status = 2; // Connection failed } http.end(); // Clean up connection data } else { status = 3; // Host not found or connection error } } return status; } bool JsonWebColor(const char* dataBuf) { // Default (Dark theme) // {"WebColor":["#eaeaea","#252525","#4f4f4f","#000","#ddd","#65c115","#1f1f1f","#ff5661","#008000","#faffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#faffff","#999","#eaeaea"]} // Default pre v7 (Light theme) // {"WebColor":["#000","#fff","#f2f2f2","#000","#fff","#000","#fff","#f00","#008000","#fff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#fff","#999","#000"]} // {"WebColor":["#000000","#ffffff","#f2f2f2","#000000","#ffffff","#000000","#ffffff","#ff0000","#008000","#ffffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#ffffff","#999999","#000000"]} JsonParser parser((char*) dataBuf); JsonParserObject root = parser.getRootObject(); JsonParserArray arr = root[PSTR(D_CMND_WEBCOLOR)].getArray(); if (arr) { // if arr is valid, i.e. json is valid, the key D_CMND_WEBCOLOR was found and the token is an arra uint32_t i = 0; for (auto color : arr) { if (i < COL_LAST) { WebHexCode(i, color.getStr()); } else { break; } i++; } } return true; } const char kWebSendStatus[] PROGMEM = D_JSON_DONE "|" D_JSON_WRONG_PARAMETERS "|" D_JSON_CONNECT_FAILED "|" D_JSON_HOST_NOT_FOUND "|" D_JSON_MEMORY_ERROR; const char kWebCommands[] PROGMEM = "|" // No prefix #ifdef USE_EMULATION D_CMND_EMULATION "|" #endif #ifdef USE_SENDMAIL D_CMND_SENDMAIL "|" #endif D_CMND_WEBSERVER "|" D_CMND_WEBPASSWORD "|" D_CMND_WEBLOG "|" D_CMND_WEBREFRESH "|" D_CMND_WEBSEND "|" D_CMND_WEBCOLOR "|" D_CMND_WEBSENSOR "|" D_CMND_WEBBUTTON "|" D_CMND_CORS; void (* const WebCommand[])(void) PROGMEM = { #ifdef USE_EMULATION &CmndEmulation, #endif #ifdef USE_SENDMAIL &CmndSendmail, #endif &CmndWebServer, &CmndWebPassword, &CmndWeblog, &CmndWebRefresh, &CmndWebSend, &CmndWebColor, &CmndWebSensor, &CmndWebButton, &CmndCors }; /*********************************************************************************************\ * Commands \*********************************************************************************************/ #ifdef USE_EMULATION void CmndEmulation(void) { #if defined(USE_EMULATION_WEMO) || defined(USE_EMULATION_HUE) #if defined(USE_EMULATION_WEMO) && defined(USE_EMULATION_HUE) if ((XdrvMailbox.payload >= EMUL_NONE) && (XdrvMailbox.payload < EMUL_MAX)) { #else #ifndef USE_EMULATION_WEMO if ((EMUL_NONE == XdrvMailbox.payload) || (EMUL_HUE == XdrvMailbox.payload)) { #endif #ifndef USE_EMULATION_HUE if ((EMUL_NONE == XdrvMailbox.payload) || (EMUL_WEMO == XdrvMailbox.payload)) { #endif #endif Settings.flag2.emulation = XdrvMailbox.payload; restart_flag = 2; } #endif ResponseCmndNumber(Settings.flag2.emulation); } #endif // USE_EMULATION #ifdef USE_SENDMAIL void CmndSendmail(void) { if (XdrvMailbox.data_len > 0) { uint8_t result = SendMail(XdrvMailbox.data); char stemp1[20]; ResponseCmndChar(GetTextIndexed(stemp1, sizeof(stemp1), result, kWebSendStatus)); } } #endif // USE_SENDMAIL void CmndWebServer(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 2)) { Settings.webserver = XdrvMailbox.payload; } if (Settings.webserver) { Response_P(PSTR("{\"" D_CMND_WEBSERVER "\":\"" D_JSON_ACTIVE_FOR " %s " D_JSON_ON_DEVICE " %s " D_JSON_WITH_IP_ADDRESS " %s\"}"), (2 == Settings.webserver) ? D_ADMIN : D_USER, NetworkHostname(), NetworkAddress().toString().c_str()); } else { ResponseCmndStateText(0); } } void CmndWebPassword(void) { if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_WEBPWD, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? WEB_PASSWORD : XdrvMailbox.data); ResponseCmndChar(SettingsText(SET_WEBPWD)); } else { Response_P(S_JSON_COMMAND_ASTERISK, XdrvMailbox.command); } } void CmndWeblog(void) { if ((XdrvMailbox.payload >= LOG_LEVEL_NONE) && (XdrvMailbox.payload <= LOG_LEVEL_DEBUG_MORE)) { Settings.weblog_level = XdrvMailbox.payload; } ResponseCmndNumber(Settings.weblog_level); } void CmndWebRefresh(void) { if ((XdrvMailbox.payload > 999) && (XdrvMailbox.payload <= 10000)) { Settings.web_refresh = XdrvMailbox.payload; } ResponseCmndNumber(Settings.web_refresh); } void CmndWebSend(void) { if (XdrvMailbox.data_len > 0) { uint32_t result = WebSend(XdrvMailbox.data); char stemp1[20]; ResponseCmndChar(GetTextIndexed(stemp1, sizeof(stemp1), result, kWebSendStatus)); } } void CmndWebColor(void) { if (XdrvMailbox.data_len > 0) { if (strstr(XdrvMailbox.data, "{") == nullptr) { // If no JSON it must be parameter if ((XdrvMailbox.data_len > 3) && (XdrvMailbox.index > 0) && (XdrvMailbox.index <= COL_LAST)) { WebHexCode(XdrvMailbox.index -1, XdrvMailbox.data); } else if (0 == XdrvMailbox.payload) { SettingsDefaultWebColor(); } } else { JsonWebColor(XdrvMailbox.data); } } Response_P(PSTR("{\"" D_CMND_WEBCOLOR "\":[")); for (uint32_t i = 0; i < COL_LAST; i++) { if (i) { ResponseAppend_P(PSTR(",")); } ResponseAppend_P(PSTR("\"#%06x\""), WebColor(i)); } ResponseAppend_P(PSTR("]}")); } void CmndWebSensor(void) { if (XdrvMailbox.index < MAX_XSNS_DRIVERS) { if (XdrvMailbox.payload >= 0) { bitWrite(Settings.sensors[XdrvMailbox.index / 32], XdrvMailbox.index % 32, XdrvMailbox.payload &1); } } Response_P(PSTR("{\"" D_CMND_WEBSENSOR "\":")); XsnsSensorState(); ResponseJsonEnd(); } void CmndWebButton(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_BUTTON_TEXT)) { if (!XdrvMailbox.usridx) { ResponseCmndAll(SET_BUTTON1, MAX_BUTTON_TEXT); } else { if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_BUTTON1 + XdrvMailbox.index -1, ('"' == XdrvMailbox.data[0]) ? "" : XdrvMailbox.data); } ResponseCmndIdxChar(SettingsText(SET_BUTTON1 + XdrvMailbox.index -1)); } } } void CmndCors(void) { if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_CORS, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? WEB_PASSWORD : XdrvMailbox.data); } ResponseCmndChar(SettingsText(SET_CORS)); } /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xdrv01(uint8_t function) { bool result = false; switch (function) { case FUNC_LOOP: PollDnsWebserver(); #ifdef USE_EMULATION if (Settings.flag2.emulation) { PollUdp(); } #endif // USE_EMULATION break; case FUNC_COMMAND: result = DecodeCommand(kWebCommands, WebCommand); break; } return result; } #endif // USE_WEBSERVER