/**
 *  @filename   :   epd2in9.h
 *  @brief      :   Header file for e-paper display library epd2in9.cpp
 *  @author     :   Yehui from Waveshare
 *
 *  Copyright (C) Waveshare     September 5 2017
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documnetation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to  whom the Software is
 * furished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 */

#ifndef EPD2IN9_H
#define EPD2IN9_H

#include "epdpaint.h"


#define DISPLAY_INIT_MODE 0
#define DISPLAY_INIT_PARTIAL 1
#define DISPLAY_INIT_FULL 2

// Display resolution
#define EPD_WIDTH       128
#define EPD_HEIGHT      296
//#define EPD_WIDTH       296
//#define EPD_HEIGHT      128

// EPD2IN9 commands
#define DRIVER_OUTPUT_CONTROL                       0x01
#define BOOSTER_SOFT_START_CONTROL                  0x0C
#define GATE_SCAN_START_POSITION                    0x0F
#define DEEP_SLEEP_MODE                             0x10
#define DATA_ENTRY_MODE_SETTING                     0x11
#define SW_RESET                                    0x12
#define TEMPERATURE_SENSOR_CONTROL                  0x1A
#define MASTER_ACTIVATION                           0x20
#define DISPLAY_UPDATE_CONTROL_1                    0x21
#define DISPLAY_UPDATE_CONTROL_2                    0x22
#define WRITE_RAM                                   0x24
#define WRITE_VCOM_REGISTER                         0x2C
#define WRITE_LUT_REGISTER                          0x32
#define SET_DUMMY_LINE_PERIOD                       0x3A
#define SET_GATE_TIME                               0x3B
#define BORDER_WAVEFORM_CONTROL                     0x3C
#define SET_RAM_X_ADDRESS_START_END_POSITION        0x44
#define SET_RAM_Y_ADDRESS_START_END_POSITION        0x45
#define SET_RAM_X_ADDRESS_COUNTER                   0x4E
#define SET_RAM_Y_ADDRESS_COUNTER                   0x4F
#define TERMINATE_FRAME_READ_WRITE                  0xFF

extern const unsigned char lut_full_update[];
extern const unsigned char lut_partial_update[];

class Epd : public Paint  {
public:
    Epd(int16_t width, int16_t height);
    int16_t width;
    int16_t height;

//    Epd();
//    ~Epd();
    int  Init(const unsigned char* lut);
    void Init(int8_t p);
    void SendCommand(unsigned char command);
    void SendData(unsigned char data);
    void WaitUntilIdle(void);
    void Reset(void);
    void SetFrameMemory(
        const unsigned char* image_buffer,
        uint16_t x,
        uint16_t y,
        uint16_t image_width,
        uint16_t image_height
    );
    void SetFrameMemory(const unsigned char* image_buffer);
    void ClearFrameMemory(unsigned char color);
    void DisplayFrame(void);
    void Sleep(void);
    void fastSPIwrite(uint8_t d,uint8_t dc);

    void DisplayOnff(int8_t on);
    void DisplayInit(int8_t p,int8_t size,int8_t rot,int8_t font);
    void Begin(int16_t cs,int16_t mosi,int16_t sclk, int16_t rst = -1, int16_t busy = -1);

    void Updateframe();

private:
    unsigned int reset_pin;
    unsigned int dc_pin;
    const unsigned char* lut;
    unsigned int cs_pin;
    signed int rst_pin;
    signed int busy_pin;
    unsigned int mosi_pin;
    unsigned int sclk_pin;
    unsigned char mode;
    uint8_t iniz = 0;
    void delay_busy(uint32_t wait);
    void SetLut(const unsigned char* lut);
    void SetMemoryArea(int x_start, int y_start, int x_end, int y_end);
    void SetMemoryPointer(int x, int y);
    void SetLut_by_host(const unsigned char* lut);
    void SetFrameMemory_Partial(const unsigned char* image_buffer,int x,int y,int image_width,int image_height);
    void DisplayFrame_Partial(void);
    //void fastSPIwrite(uint8_t d,uint8_t dc);
};

#endif /* EPD2IN9_H */

/* END OF FILE */