/* xdrv_01_webserver.ino - webserver for Tasmota Copyright (C) 2021 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifdef USE_WEBSERVER /*********************************************************************************************\ * Web server and WiFi Manager * * Enables configuration and reconfiguration of WiFi credentials using a Captive Portal * Based on source by AlexT (https://github.com/tzapu) \*********************************************************************************************/ #define XDRV_01 1 // Enable below demo feature only if defines USE_UNISHOX_COMPRESSION and USE_SCRIPT_WEB_DISPLAY are disabled //#define USE_WEB_SSE #ifndef WIFI_SOFT_AP_CHANNEL #define WIFI_SOFT_AP_CHANNEL 1 // Soft Access Point Channel number between 1 and 11 as used by WifiManager web GUI #endif #ifndef MAX_WIFI_NETWORKS_TO_SHOW #define MAX_WIFI_NETWORKS_TO_SHOW 3 // Maximum number of Wifi Networks to show in the Wifi Configuration Menu BEFORE clicking on Show More Networks. #endif #ifndef RESTART_AFTER_INITIAL_WIFI_CONFIG #define RESTART_AFTER_INITIAL_WIFI_CONFIG true // Restart Tasmota after initial Wifi Config of a blank device #endif // If disabled, Tasmota will keep both the wifi AP and the wifi connection to the router // but only until next restart. #ifndef AFTER_INITIAL_WIFI_CONFIG_GO_TO_NEW_IP // If RESTART_AFTER_INITIAL_WIFI_CONFIG and AFTER_INITIAL_WIFI_CONFIG_GO_TO_NEW_IP are true, #define AFTER_INITIAL_WIFI_CONFIG_GO_TO_NEW_IP true // the user will be redirected to the new IP of Tasmota (in the new Network). #endif // If the first is true, but this is false, the device will restart but the user will see // a window telling that the WiFi Configuration was Ok and that the window can be closed. const uint16_t CHUNKED_BUFFER_SIZE = (MESSZ / 2) - 100; // Chunk buffer size (should be smaller than half mqtt_data size = MESSZ) const uint16_t HTTP_REFRESH_TIME = 2345; // milliseconds const uint16_t HTTP_RESTART_RECONNECT_TIME = 10000; // milliseconds - Allow time for restart and wifi reconnect #ifdef ESP8266 const uint16_t HTTP_OTA_RESTART_RECONNECT_TIME = 24000; // milliseconds - Allow time for uploading binary, unzip/write to final destination and wifi reconnect #endif // ESP8266 #ifdef ESP32 const uint16_t HTTP_OTA_RESTART_RECONNECT_TIME = 10000; // milliseconds - Allow time for restart and wifi reconnect #endif // ESP32 #include #include enum UploadTypes { UPL_TASMOTA, UPL_SETTINGS, UPL_EFM8BB1, UPL_TASMOTACLIENT, UPL_EFR32, UPL_SHD, UPL_CCL, UPL_UFSFILE }; #ifdef USE_UNISHOX_COMPRESSION #ifdef USE_JAVASCRIPT_ES6 #include "./html_compressed/HTTP_HEADER1_ES6.h" #else #include "./html_compressed/HTTP_HEADER1_NOES6.h" #endif #else #ifdef USE_JAVASCRIPT_ES6 #include "./html_uncompressed/HTTP_HEADER1_ES6.h" #else #include "./html_uncompressed/HTTP_HEADER1_NOES6.h" #endif #endif const char HTTP_SCRIPT_COUNTER[] PROGMEM = "var cn=180;" // seconds "function u(){" "if(cn>=0){" "eb('t').innerHTML='" D_RESTART_IN " '+cn+' " D_SECONDS "';" "cn--;" "setTimeout(u,1000);" "}" "}" "wl(u);"; #ifdef USE_UNISHOX_COMPRESSION #ifdef USE_SCRIPT_WEB_DISPLAY #include "./html_compressed/HTTP_SCRIPT_ROOT_WEB_DISPLAY.h" #else #include "./html_compressed/HTTP_SCRIPT_ROOT_NO_WEB_DISPLAY.h" #endif #include "./html_compressed/HTTP_SCRIPT_ROOT_PART2.h" #else #ifdef USE_SCRIPT_WEB_DISPLAY #include "./html_uncompressed/HTTP_SCRIPT_ROOT_WEB_DISPLAY.h" #else #ifdef USE_WEB_SSE #include "./html_uncompressed/HTTP_SCRIPT_ROOT_SSE_NO_WEB_DISPLAY.h" #else #include "./html_uncompressed/HTTP_SCRIPT_ROOT_NO_WEB_DISPLAY.h" #endif // USE_WEB_SSE #endif #include "./html_uncompressed/HTTP_SCRIPT_ROOT_PART2.h" #endif const char HTTP_SCRIPT_WIFI[] PROGMEM = "function c(l){" "eb('s1').value=l.innerText||l.textContent;" "eb('p1').focus();" "}"; const char HTTP_SCRIPT_HIDE[] PROGMEM = "function hidBtns() {" "eb('butmo').style.display='none';" "eb('butmod').style.display='none';" "eb('but0').style.display='block';" "eb('but1').style.display='block';" "eb('but13').style.display='block';" "eb('but0d').style.display='block';" "eb('but13d').style.display='block';" "}"; const char HTTP_SCRIPT_RELOAD_TIME[] PROGMEM = "setTimeout(function(){location.href='.';},%d);"; #ifdef USE_UNISHOX_COMPRESSION #include "./html_compressed/HTTP_SCRIPT_CONSOL.h" #else #include "./html_uncompressed/HTTP_SCRIPT_CONSOL.h" #endif const char HTTP_MODULE_TEMPLATE_REPLACE_INDEX[] PROGMEM = "}2%d'>%s (%d)}3"; // }2 and }3 are used in below os.replace const char HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX[] PROGMEM = "}2%d'>%s}3"; // }2 and }3 are used in below os.replace #ifdef USE_UNISHOX_COMPRESSION #include "./html_compressed/HTTP_SCRIPT_MODULE_TEMPLATE.h" #include "./html_compressed/HTTP_SCRIPT_TEMPLATE.h" #else #include "./html_uncompressed/HTTP_SCRIPT_MODULE_TEMPLATE.h" #include "./html_uncompressed/HTTP_SCRIPT_TEMPLATE.h" #endif const char HTTP_SCRIPT_TEMPLATE2[] PROGMEM = "j=0;" "for(i=0;i<" STR(MAX_USER_PINS) ";i++){" // Supports 13 GPIOs "if(6==i){j=9;}" "if(8==i){j=12;}" "sk(g[i],j);" // Set GPIO "j++;" "}"; const char HTTP_SCRIPT_TEMPLATE3[] PROGMEM = "\";" "sk(g[13]," STR(ADC0_PIN) ");"; // Set ADC0 const char HTTP_SCRIPT_TEMPLATE4[] PROGMEM = "g=o.shift();" // FLAG "for(i=0;i<" STR(GPIO_FLAG_USED) ";i++){" "p=(g>>i)&1;" "eb('c'+i).checked=p;" // Set FLAG checkboxes "}" "if(" STR(USER_MODULE) "==c){" "g=o.shift();" "eb('g99').value=g;" // Set BASE for initial select "}" "}" "function st(t){" "c=t;" // Needed for initial BASE select "var a='tp?t='+t;" "ld(a,x1);" // ?t related to WebGetArg("t", stemp, sizeof(stemp)); "}" "function sl(){" "os=\""; // }2'0'>Sonoff Basic (1)}3... const char HTTP_SCRIPT_TEMPLATE5[] PROGMEM = "\";" "sk(" STR(WEMOS_MODULE) ",99);" // 17 = WEMOS "st(" STR(USER_MODULE) ");" "}" "wl(sl);"; const char HTTP_SCRIPT_INFO_BEGIN[] PROGMEM = "function i(){" "var s,o=\""; const char HTTP_SCRIPT_INFO_END[] PROGMEM = "\";" // "}1" and "}2" means do not use "}x" in Information text "s=o.replace(/}1/g,\"\").replace(/}2/g,\"\");" "eb('i').innerHTML=s;" "}" "wl(i);"; #ifdef USE_UNISHOX_COMPRESSION #include "./html_compressed/HTTP_HEAD_LAST_SCRIPT.h" #include "./html_compressed/HTTP_HEAD_STYLE1.h" #include "./html_compressed/HTTP_HEAD_STYLE2.h" #else #include "./html_uncompressed/HTTP_HEAD_LAST_SCRIPT.h" #include "./html_uncompressed/HTTP_HEAD_STYLE1.h" #include "./html_uncompressed/HTTP_HEAD_STYLE2.h" #endif #ifdef USE_ZIGBEE // Styles used for Zigbee Web UI // Battery icon from https://css.gg/battery // #ifdef USE_UNISHOX_COMPRESSION #include "./html_compressed/HTTP_HEAD_STYLE_ZIGBEE.h" #else #include "./html_uncompressed/HTTP_HEAD_STYLE_ZIGBEE.h" #endif #endif // USE_ZIGBEE const char HTTP_HEAD_STYLE_SSI[] PROGMEM = // Signal Strength Indicator ".si{display:inline-flex;align-items:flex-end;height:15px;padding:0}" ".si i{width:3px;margin-right:1px;border-radius:3px;background-color:#%06x}" ".si .b0{height:25%%}.si .b1{height:50%%}.si .b2{height:75%%}.si .b3{height:100%%}.o30{opacity:.3}"; const char HTTP_HEAD_STYLE3[] PROGMEM = "" "" "" "
" // COLOR_TEXT #ifdef FIRMWARE_MINIMAL "

" D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "

" // COLOR_TEXT_WARNING #endif "
" // COLOR_TITLE /* #ifdef LANGUAGE_MODULE_NAME "

" D_MODULE " %s

" #else "

%s " D_MODULE "

" #endif */ "

%s

" // Module name "

%s

"; // Device name const char HTTP_MSG_SLIDER_GRADIENT[] PROGMEM = "
" "" "
"; const char HTTP_MSG_SLIDER_SHUTTER[] PROGMEM = "
" D_CLOSE "" D_OPEN "
" "
"; const char HTTP_MSG_RSTRT[] PROGMEM = "
" D_DEVICE_WILL_RESTART "

"; const char HTTP_FORM_LOGIN[] PROGMEM = "
" "
" "

" D_USER "

" "

" D_PASSWORD "

" "
" "" "
"; const char HTTP_FORM_TEMPLATE[] PROGMEM = "
 " D_TEMPLATE_PARAMETERS " " "
"; const char HTTP_FORM_TEMPLATE_FLAG[] PROGMEM = "

" // Keep close so do not use
"
 " D_TEMPLATE_FLAGS " 

" // "
" "

"; const char HTTP_FORM_MODULE[] PROGMEM = "
 " D_MODULE_PARAMETERS " " "" "

" D_MODULE_TYPE " (%s)

" "
"; const char HTTP_FORM_WIFI_PART1[] PROGMEM = "
 " D_WIFI_PARAMETERS " " "" "

" D_AP1_SSID "%s

" // Need \" instead of ' to be able to use ' in text (#8489) "


" "

" D_AP2_SSID " (" STA_SSID2 ")

" "


" "

" D_HOSTNAME " (%s)

" "

" D_CORS_DOMAIN "

"; const char HTTP_FORM_LOG1[] PROGMEM = "
 " D_LOGGING_PARAMETERS " " ""; const char HTTP_FORM_LOG2[] PROGMEM = "

" D_SYSLOG_HOST " (" SYS_LOG_HOST ")

" "

" D_SYSLOG_PORT " (" STR(SYS_LOG_PORT) ")

" "

" D_TELEMETRY_PERIOD " (" STR(TELE_PERIOD) ")

"; const char HTTP_FORM_OTHER[] PROGMEM = "
 " D_OTHER_PARAMETERS " " "" "

" "
 " D_TEMPLATE " " "

" // We need ' apostrophe here as the template contains " quotation mark "

" "
" "
" "

" "
" "
" "
" "

" "
"; const char HTTP_FORM_END[] PROGMEM = "
" "" "
"; const char HTTP_FORM_RST[] PROGMEM = "
" "
 " D_RESTORE_CONFIGURATION " "; const char HTTP_FORM_UPG[] PROGMEM = "
" "
 " D_UPGRADE_BY_WEBSERVER " " "
" "
" D_OTA_URL "

" "
" "


" "
 " D_UPGRADE_BY_FILE_UPLOAD " "; const char HTTP_FORM_RST_UPG[] PROGMEM = "
" "

" "
" "
" "
" ""; const char HTTP_FORM_CMND[] PROGMEM = "


" "
" "
" // "
" ""; const char HTTP_TABLE100[] PROGMEM = "
"; const char HTTP_COUNTER[] PROGMEM = "
"; const char HTTP_END[] PROGMEM = "" "" "" ""; const char HTTP_DEVICE_CONTROL[] PROGMEM = ""; // ?o is related to WebGetArg("o", tmp, sizeof(tmp)); const char HTTP_DEVICE_STATE[] PROGMEM = ""; enum ButtonTitle { BUTTON_RESTART, BUTTON_RESET_CONFIGURATION, BUTTON_MAIN, BUTTON_CONFIGURATION, BUTTON_INFORMATION, BUTTON_FIRMWARE_UPGRADE, BUTTON_MANAGEMENT, BUTTON_MODULE, BUTTON_WIFI, BUTTON_LOGGING, BUTTON_OTHER, BUTTON_TEMPLATE, BUTTON_BACKUP, BUTTON_RESTORE, BUTTON_CONSOLE }; const char kButtonTitle[] PROGMEM = D_RESTART "|" D_RESET_CONFIGURATION "|" D_MAIN_MENU "|" D_CONFIGURATION "|" D_INFORMATION "|" D_FIRMWARE_UPGRADE "|" D_MANAGEMENT "|" D_CONFIGURE_MODULE "|" D_CONFIGURE_WIFI"|" D_CONFIGURE_LOGGING "|" D_CONFIGURE_OTHER "|" D_CONFIGURE_TEMPLATE "|" D_BACKUP_CONFIGURATION "|" D_RESTORE_CONFIGURATION "|" D_CONSOLE; const char kButtonAction[] PROGMEM = ".|rt|" ".|cn|in|up|mn|" "md|wi|lg|co|tp|dl|rs|" "cs"; const char kButtonConfirm[] PROGMEM = D_CONFIRM_RESTART "|" D_CONFIRM_RESET_CONFIGURATION; enum CTypes { CT_HTML, CT_PLAIN, CT_XML, CT_STREAM, CT_APP_JSON, CT_APP_STREAM }; const char kContentTypes[] PROGMEM = "text/html|text/plain|text/xml|text/event-stream|application/json|application/octet-stream"; const char kLoggingOptions[] PROGMEM = D_SERIAL_LOG_LEVEL "|" D_WEB_LOG_LEVEL "|" D_MQTT_LOG_LEVEL "|" D_SYS_LOG_LEVEL; const char kLoggingLevels[] PROGMEM = D_NONE "|" D_ERROR "|" D_INFO "|" D_DEBUG "|" D_MORE_DEBUG; const char kEmulationOptions[] PROGMEM = D_NONE "|" D_BELKIN_WEMO "|" D_HUE_BRIDGE; const char kUploadErrors[] PROGMEM = D_UPLOAD_ERR_1 "|" D_UPLOAD_ERR_2 "|" D_UPLOAD_ERR_3 "|" D_UPLOAD_ERR_4 "|" D_UPLOAD_ERR_5 "|" D_UPLOAD_ERR_6 "|" D_UPLOAD_ERR_7 "|" D_UPLOAD_ERR_8 "|" D_UPLOAD_ERR_9; const uint16_t DNS_PORT = 53; enum HttpOptions {HTTP_OFF, HTTP_USER, HTTP_ADMIN, HTTP_MANAGER, HTTP_MANAGER_RESET_ONLY}; enum WifiTestOptions {WIFI_NOT_TESTING, WIFI_TESTING, WIFI_TEST_FINISHED_SUCCESSFUL, WIFI_TEST_FINISHED_BAD}; DNSServer *DnsServer; ESP8266WebServer *Webserver; struct WEB { String chunk_buffer = ""; // Could be max 2 * CHUNKED_BUFFER_SIZE uint16_t upload_error = 0; uint8_t state = HTTP_OFF; uint8_t upload_file_type; uint8_t config_block_count = 0; uint8_t config_xor_on = 0; uint8_t config_xor_on_set = CONFIG_FILE_XOR; bool upload_services_stopped = false; bool reset_web_log_flag = false; // Reset web console log bool initial_config = false; uint8_t wifiTest = WIFI_NOT_TESTING; uint8_t wifi_test_counter = 0; uint16_t save_data_counter = 0; uint8_t old_wificonfig = WIFI_MANAGER; } Web; // Helper function to avoid code duplication (saves 4k Flash) // arg can be in PROGMEM static void WebGetArg(const char* arg, char* out, size_t max) { String s = Webserver->arg((const __FlashStringHelper *)arg); strlcpy(out, s.c_str(), max); // out[max-1] = '\0'; // Ensure terminating NUL } static bool WifiIsInManagerMode(){ return (HTTP_MANAGER == Web.state || HTTP_MANAGER_RESET_ONLY == Web.state); } void ShowWebSource(uint32_t source) { if ((source > 0) && (source < SRC_MAX)) { char stemp1[20]; AddLog(LOG_LEVEL_DEBUG, PSTR("SRC: %s from %_I"), GetTextIndexed(stemp1, sizeof(stemp1), source, kCommandSource), (uint32_t)Webserver->client().remoteIP()); } } void ExecuteWebCommand(char* svalue, uint32_t source) { ShowWebSource(source); TasmotaGlobal.last_source = source; ExecuteCommand(svalue, SRC_IGNORE); } void ExecuteWebCommand(char* svalue) { ExecuteWebCommand(svalue, SRC_WEBGUI); } // replace the series of `Webserver->on()` with a table in PROGMEM typedef struct WebServerDispatch_t { char uri[3]; // the prefix "/" is added automatically uint8_t method; void (*handler)(void); } WebServerDispatch_t; const WebServerDispatch_t WebServerDispatch[] PROGMEM = { { "", HTTP_ANY, HandleRoot }, { "up", HTTP_ANY, HandleUpgradeFirmware }, { "u1", HTTP_ANY, HandleUpgradeFirmwareStart }, // OTA { "u2", HTTP_OPTIONS, HandlePreflightRequest }, { "u3", HTTP_ANY, HandleUploadDone }, { "mn", HTTP_GET, HandleManagement }, { "cs", HTTP_GET, HandleConsole }, { "cs", HTTP_OPTIONS, HandlePreflightRequest }, { "cm", HTTP_ANY, HandleHttpCommand }, #ifndef FIRMWARE_MINIMAL { "cn", HTTP_ANY, HandleConfiguration }, { "md", HTTP_ANY, HandleModuleConfiguration }, { "wi", HTTP_ANY, HandleWifiConfiguration }, { "lg", HTTP_ANY, HandleLoggingConfiguration }, { "tp", HTTP_ANY, HandleTemplateConfiguration }, { "co", HTTP_ANY, HandleOtherConfiguration }, { "dl", HTTP_ANY, HandleBackupConfiguration }, { "rs", HTTP_ANY, HandleRestoreConfiguration }, { "rt", HTTP_ANY, HandleResetConfiguration }, { "in", HTTP_ANY, HandleInformation }, #endif // Not FIRMWARE_MINIMAL }; void WebServer_on(const char * prefix, void (*func)(void), uint8_t method = HTTP_ANY) { #ifdef ESP8266 Webserver->on((const __FlashStringHelper *) prefix, (HTTPMethod) method, func); #endif // ESP8266 #ifdef ESP32 Webserver->on(prefix, (HTTPMethod) method, func); #endif // ESP32 } void StartWebserver(int type, IPAddress ipweb) { if (!Settings.web_refresh) { Settings.web_refresh = HTTP_REFRESH_TIME; } if (!Web.state) { if (!Webserver) { Webserver = new ESP8266WebServer((HTTP_MANAGER == type || HTTP_MANAGER_RESET_ONLY == type) ? 80 : WEB_PORT); // call `Webserver->on()` on each entry for (uint32_t i=0; ionNotFound(HandleNotFound); // Webserver->on(F("/u2"), HTTP_POST, HandleUploadDone, HandleUploadLoop); // this call requires 2 functions so we keep a direct call Webserver->on("/u2", HTTP_POST, HandleUploadDone, HandleUploadLoop); // this call requires 2 functions so we keep a direct call #ifndef FIRMWARE_MINIMAL XdrvCall(FUNC_WEB_ADD_HANDLER); XsnsCall(FUNC_WEB_ADD_HANDLER); #endif // Not FIRMWARE_MINIMAL } Web.reset_web_log_flag = false; Webserver->begin(); // Web server start } if (Web.state != type) { #if LWIP_IPV6 String ipv6_addr = WifiGetIPv6(); if (ipv6_addr!="") { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_HTTP D_WEBSERVER_ACTIVE_ON " %s%s " D_WITH_IP_ADDRESS " %_I and IPv6 global address %s "), NetworkHostname(), (Mdns.begun) ? PSTR(".local") : "", (uint32_t)ipweb, ipv6_addr.c_str()); } else { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_HTTP D_WEBSERVER_ACTIVE_ON " %s%s " D_WITH_IP_ADDRESS " %_I"), NetworkHostname(), (Mdns.begun) ? PSTR(".local") : "", (uint32_t)ipweb); } #else AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_HTTP D_WEBSERVER_ACTIVE_ON " %s%s " D_WITH_IP_ADDRESS " %_I"), NetworkHostname(), (Mdns.begun) ? PSTR(".local") : "", (uint32_t)ipweb); #endif // LWIP_IPV6 = 1 TasmotaGlobal.rules_flag.http_init = 1; Web.state = type; } } void StopWebserver(void) { if (Web.state) { Webserver->close(); Web.state = HTTP_OFF; AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_HTTP D_WEBSERVER_STOPPED)); } } void WifiManagerBegin(bool reset_only) { // setup AP if (!Web.initial_config) { AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_WCFG_2_WIFIMANAGER " " D_ACTIVE_FOR_3_MINUTES)); } if (!TasmotaGlobal.global_state.wifi_down) { // WiFi.mode(WIFI_AP_STA); WifiSetMode(WIFI_AP_STA); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION)); } else { // WiFi.mode(WIFI_AP); WifiSetMode(WIFI_AP); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_WIFIMANAGER_SET_ACCESSPOINT)); } //StopWebserver(); DnsServer = new DNSServer(); int channel = WIFI_SOFT_AP_CHANNEL; if ((channel < 1) || (channel > 13)) { channel = 1; } // bool softAP(const char* ssid, const char* passphrase = NULL, int channel = 1, int ssid_hidden = 0, int max_connection = 4); WiFi.softAP(TasmotaGlobal.hostname, WIFI_AP_PASSPHRASE, channel, 0, 1); delay(500); // Without delay I've seen the IP address blank /* Setup the DNS server redirecting all the domains to the apIP */ DnsServer->setErrorReplyCode(DNSReplyCode::NoError); DnsServer->start(DNS_PORT, "*", WiFi.softAPIP()); StartWebserver((reset_only ? HTTP_MANAGER_RESET_ONLY : HTTP_MANAGER), WiFi.softAPIP()); } void PollDnsWebserver(void) { if (DnsServer) { DnsServer->processNextRequest(); } if (Webserver) { Webserver->handleClient(); } } /*********************************************************************************************/ bool WebAuthenticate(void) { if (strlen(SettingsText(SET_WEBPWD)) && (HTTP_MANAGER_RESET_ONLY != Web.state)) { return Webserver->authenticate(WEB_USERNAME, SettingsText(SET_WEBPWD)); } else { return true; } } bool HttpCheckPriviledgedAccess(bool autorequestauth = true) { if (HTTP_USER == Web.state) { HandleRoot(); return false; } if (autorequestauth && !WebAuthenticate()) { Webserver->requestAuthentication(); return false; } return true; } void HttpHeaderCors(void) { if (strlen(SettingsText(SET_CORS))) { Webserver->sendHeader(F("Access-Control-Allow-Origin"), SettingsText(SET_CORS)); } } void WSHeaderSend(void) { char server[32]; snprintf_P(server, sizeof(server), PSTR("Tasmota/%s (%s)"), TasmotaGlobal.version, GetDeviceHardware().c_str()); Webserver->sendHeader(F("Server"), server); Webserver->sendHeader(F("Cache-Control"), F("no-cache, no-store, must-revalidate")); Webserver->sendHeader(F("Pragma"), F("no-cache")); Webserver->sendHeader(F("Expires"), F("-1")); HttpHeaderCors(); } /********************************************************************************************** * HTTP Content Page handler **********************************************************************************************/ void WSSend(int code, int ctype, const String& content) { char ct[25]; // strlen("application/octet-stream") +1 = Longest Content type string Webserver->send(code, GetTextIndexed(ct, sizeof(ct), ctype, kContentTypes), content); } /********************************************************************************************** * HTTP Content Chunk handler **********************************************************************************************/ void WSContentBegin(int code, int ctype) { Webserver->client().flush(); WSHeaderSend(); Webserver->setContentLength(CONTENT_LENGTH_UNKNOWN); WSSend(code, ctype, ""); // Signal start of chunked content Web.chunk_buffer = ""; } void _WSContentSend(const String& content) // Low level sendContent for all core versions { size_t len = content.length(); Webserver->sendContent(content); #ifdef USE_DEBUG_DRIVER ShowFreeMem(PSTR("WSContentSend")); #endif DEBUG_CORE_LOG(PSTR("WEB: Chunk size %d/%d"), len, sizeof(TasmotaGlobal.mqtt_data)); } void WSContentFlush(void) { if (Web.chunk_buffer.length() > 0) { _WSContentSend(Web.chunk_buffer); // Flush chunk buffer Web.chunk_buffer = ""; } } void _WSContentSendBuffer(void) { int len = strlen(TasmotaGlobal.mqtt_data); if (0 == len) { // No content return; } else if (len == sizeof(TasmotaGlobal.mqtt_data)) { AddLog(LOG_LEVEL_INFO, PSTR("HTP: Content too large")); } else if (len < CHUNKED_BUFFER_SIZE) { // Append chunk buffer with small content Web.chunk_buffer += TasmotaGlobal.mqtt_data; len = Web.chunk_buffer.length(); } if (len >= CHUNKED_BUFFER_SIZE) { // Either content or chunk buffer is oversize WSContentFlush(); // Send chunk buffer before possible content oversize } if (strlen(TasmotaGlobal.mqtt_data) >= CHUNKED_BUFFER_SIZE) { // Content is oversize _WSContentSend(TasmotaGlobal.mqtt_data); // Send content } } void WSContentSend_P(const char* formatP, ...) // Content send snprintf_P char data { // This uses char strings. Be aware of sending %% if % is needed va_list arg; va_start(arg, formatP); int len = ext_vsnprintf_P(TasmotaGlobal.mqtt_data, sizeof(TasmotaGlobal.mqtt_data), formatP, arg); va_end(arg); #ifdef DEBUG_TASMOTA_CORE if (len > (sizeof(TasmotaGlobal.mqtt_data) -1)) { TasmotaGlobal.mqtt_data[33] = '\0'; DEBUG_CORE_LOG(PSTR("ERROR: WSContentSend_P size %d > mqtt_data size %d. Start of data [%s...]"), len, sizeof(TasmotaGlobal.mqtt_data), TasmotaGlobal.mqtt_data); } #endif _WSContentSendBuffer(); } void WSContentSend_PD(const char* formatP, ...) // Content send snprintf_P char data checked for decimal separator { // This uses char strings. Be aware of sending %% if % is needed va_list arg; va_start(arg, formatP); int len = ext_vsnprintf_P(TasmotaGlobal.mqtt_data, sizeof(TasmotaGlobal.mqtt_data), formatP, arg); va_end(arg); #ifdef DEBUG_TASMOTA_CORE if (len > (sizeof(TasmotaGlobal.mqtt_data) -1)) { TasmotaGlobal.mqtt_data[33] = '\0'; DEBUG_CORE_LOG(PSTR("ERROR: WSContentSend_PD size %d > mqtt_data size %d. Start of data [%s...]"), len, sizeof(TasmotaGlobal.mqtt_data), TasmotaGlobal.mqtt_data); } #endif if (D_DECIMAL_SEPARATOR[0] != '.') { for (uint32_t i = 0; i < len; i++) { if ('.' == TasmotaGlobal.mqtt_data[i]) { TasmotaGlobal.mqtt_data[i] = D_DECIMAL_SEPARATOR[0]; } } } _WSContentSendBuffer(); } void WSContentStart_P(const char* title, bool auth) { if (auth && !WebAuthenticate()) { return Webserver->requestAuthentication(); } WSContentBegin(200, CT_HTML); if (title != nullptr) { WSContentSend_P(HTTP_HEADER1, PSTR(D_HTML_LANGUAGE), SettingsText(SET_DEVICENAME), title); } } void WSContentStart_P(const char* title) { WSContentStart_P(title, true); } void WSContentSendStyle_P(const char* formatP, ...) { if ( WifiIsInManagerMode() && (!Web.initial_config) ) { if (WifiConfigCounter()) { WSContentSend_P(HTTP_SCRIPT_COUNTER); } } WSContentSend_P(HTTP_HEAD_LAST_SCRIPT); WSContentSend_P(HTTP_HEAD_STYLE1, WebColor(COL_FORM), WebColor(COL_INPUT), WebColor(COL_INPUT_TEXT), WebColor(COL_INPUT), WebColor(COL_INPUT_TEXT), WebColor(COL_CONSOLE), WebColor(COL_CONSOLE_TEXT), WebColor(COL_BACKGROUND)); WSContentSend_P(HTTP_HEAD_STYLE2, WebColor(COL_BUTTON), WebColor(COL_BUTTON_TEXT), WebColor(COL_BUTTON_HOVER), WebColor(COL_BUTTON_RESET), WebColor(COL_BUTTON_RESET_HOVER), WebColor(COL_BUTTON_SAVE), WebColor(COL_BUTTON_SAVE_HOVER), WebColor(COL_BUTTON)); #ifdef USE_ZIGBEE WSContentSend_P(HTTP_HEAD_STYLE_ZIGBEE); #endif // USE_ZIGBEE if (formatP != nullptr) { // This uses char strings. Be aware of sending %% if % is needed va_list arg; va_start(arg, formatP); int len = ext_vsnprintf_P(TasmotaGlobal.mqtt_data, sizeof(TasmotaGlobal.mqtt_data), formatP, arg); va_end(arg); #ifdef DEBUG_TASMOTA_CORE if (len > (sizeof(TasmotaGlobal.mqtt_data) -1)) { TasmotaGlobal.mqtt_data[33] = '\0'; DEBUG_CORE_LOG(PSTR("ERROR: WSContentSendStyle_P size %d > mqtt_data size %d. Start of data [%s...]"), len, sizeof(TasmotaGlobal.mqtt_data), TasmotaGlobal.mqtt_data); } #endif _WSContentSendBuffer(); } WSContentSend_P(HTTP_HEAD_STYLE3, WebColor(COL_TEXT), #ifdef FIRMWARE_MINIMAL WebColor(COL_TEXT_WARNING), #endif WebColor(COL_TITLE), (Web.initial_config) ? "" : ModuleName().c_str(), SettingsText(SET_DEVICENAME)); // SetOption53 - Show hostname and IP address in GUI main menu #if (RESTART_AFTER_INITIAL_WIFI_CONFIG) if (Settings.flag3.gui_hostname_ip) { #else if ( Settings.flag3.gui_hostname_ip || ( (WiFi.getMode() == WIFI_AP_STA) && (!Web.initial_config) ) ) { #endif bool lip = (static_cast(WiFi.localIP()) != 0); bool sip = (static_cast(WiFi.softAPIP()) != 0); WSContentSend_P(PSTR("

%s%s (%s%s%s)

"), // tasmota.local (192.168.2.12, 192.168.4.1) NetworkHostname(), (Mdns.begun) ? PSTR(".local") : "", (lip) ? WiFi.localIP().toString().c_str() : "", (lip && sip) ? ", " : "", (sip) ? WiFi.softAPIP().toString().c_str() : ""); } WSContentSend_P(PSTR("")); } void WSContentSendStyle(void) { WSContentSendStyle_P(nullptr); } void WSContentTextCenterStart(uint32_t color) { WSContentSend_P(PSTR("
"), color); } void WSContentButton(uint32_t title_index, bool show=true) { char action[4]; char title[100]; // Large to accomodate UTF-16 as used by Russian WSContentSend_P(PSTR("

"), GetTextIndexed(confirm, sizeof(confirm), title_index, kButtonConfirm), (!title_index) ? PSTR("rst") : PSTR("non"), GetTextIndexed(title, sizeof(title), title_index, kButtonTitle)); } else { WSContentSend_P(PSTR(">

"), GetTextIndexed(title, sizeof(title), title_index, kButtonTitle)); } } void WSContentSpaceButton(uint32_t title_index, bool show=true) { WSContentSend_P(PSTR("
"),title_index, show ? "block":"none"); // 5px padding WSContentButton(title_index, show); } void WSContentSend_Temp(const char *types, float f_temperature) { WSContentSend_PD(HTTP_SNS_F_TEMP, types, Settings.flag2.temperature_resolution, &f_temperature, TempUnit()); } void WSContentSend_Voltage(const char *types, float f_voltage) { WSContentSend_PD(HTTP_SNS_F_VOLTAGE, types, Settings.flag2.voltage_resolution, &f_voltage); } void WSContentSend_CurrentMA(const char *types, float f_current) { WSContentSend_PD(HTTP_SNS_F_CURRENT_MA, types, Settings.flag2.current_resolution, &f_current); } void WSContentSend_THD(const char *types, float f_temperature, float f_humidity) { WSContentSend_Temp(types, f_temperature); char parameter[FLOATSZ]; dtostrfd(f_humidity, Settings.flag2.humidity_resolution, parameter); WSContentSend_PD(HTTP_SNS_HUM, types, parameter); dtostrfd(CalcTempHumToDew(f_temperature, f_humidity), Settings.flag2.temperature_resolution, parameter); WSContentSend_PD(HTTP_SNS_DEW, types, parameter, TempUnit()); } void WSContentEnd(void) { WSContentFlush(); // Flush chunk buffer _WSContentSend(""); // Signal end of chunked content Webserver->client().stop(); } void WSContentStop(void) { if ( WifiIsInManagerMode() && (!Web.initial_config) ) { if (WifiConfigCounter()) { WSContentSend_P(HTTP_COUNTER); } } WSContentSend_P(HTTP_END, TasmotaGlobal.version); WSContentEnd(); } /*********************************************************************************************/ void WebRestart(uint32_t type) { // type 0 = restart // type 1 = restart after config change // type 2 = Checking WiFi Connection - no restart, only refresh page. // type 3 = restart after WiFi Connection Test Successful bool reset_only = (HTTP_MANAGER_RESET_ONLY == Web.state); WSContentStart_P((type) ? PSTR(D_SAVE_CONFIGURATION) : PSTR(D_RESTART), !reset_only); #if ((RESTART_AFTER_INITIAL_WIFI_CONFIG) && (AFTER_INITIAL_WIFI_CONFIG_GO_TO_NEW_IP)) // In case of type 3 (New network has been configured) go to the new device's IP in the new Network if (3 == type) { WSContentSend_P("setTimeout(function(){location.href='http://%_I';},%d);", (uint32_t)WiFi.localIP(), HTTP_RESTART_RECONNECT_TIME ); } else { WSContentSend_P(HTTP_SCRIPT_RELOAD_TIME, HTTP_RESTART_RECONNECT_TIME); } #else // In case of type 3 (New network has been configured) do not refresh the page. Just halt. // The IP of the device while was in AP mode, won't be the new IP of the newly configured Network. if (!(3 == type)) { WSContentSend_P(HTTP_SCRIPT_RELOAD_TIME, HTTP_RESTART_RECONNECT_TIME); } #endif WSContentSendStyle(); if (type) { if (!(3 == type)) { WSContentSend_P(PSTR("
%s

"), (type==2) ? PSTR(D_TRYING_TO_CONNECT) : PSTR(D_CONFIGURATION_SAVED) ); } else { #if (AFTER_INITIAL_WIFI_CONFIG_GO_TO_NEW_IP) WSContentTextCenterStart(WebColor(COL_TEXT_SUCCESS)); WSContentSend_P(PSTR(D_SUCCESSFUL_WIFI_CONNECTION "

" D_REDIRECTING_TO_NEW_IP "

")); #else WSContentTextCenterStart(WebColor(COL_TEXT_SUCCESS)); WSContentSend_P(PSTR(D_SUCCESSFUL_WIFI_CONNECTION "

" D_NOW_YOU_CAN_CLOSE_THIS_WINDOW "

")); #endif } } if (type<2) { WSContentSend_P(HTTP_MSG_RSTRT); if (HTTP_MANAGER == Web.state || reset_only) { Web.state = HTTP_ADMIN; } else { WSContentSpaceButton(BUTTON_MAIN); } } WSContentStop(); if (!(2 == type)) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_RESTART)); ShowWebSource(SRC_WEBGUI); TasmotaGlobal.restart_flag = 2; } } /*********************************************************************************************/ void HandleWifiLogin(void) { WSContentStart_P(PSTR(D_CONFIGURE_WIFI), false); // false means show page no matter if the client has or has not credentials WSContentSendStyle(); WSContentSend_P(HTTP_FORM_LOGIN); if (HTTP_MANAGER_RESET_ONLY == Web.state) { WSContentSpaceButton(BUTTON_RESTART); #ifndef FIRMWARE_MINIMAL WSContentSpaceButton(BUTTON_RESET_CONFIGURATION); #endif // FIRMWARE_MINIMAL } WSContentStop(); } uint32_t WebUseManagementSubmenu(void) { static uint32_t management_count = 0; if (!management_count) { XdrvMailbox.index = 1; XdrvCall(FUNC_WEB_ADD_CONSOLE_BUTTON); XsnsCall(FUNC_WEB_ADD_CONSOLE_BUTTON); XdrvCall(FUNC_WEB_ADD_MANAGEMENT_BUTTON); management_count = XdrvMailbox.index; } return management_count -1; } uint32_t WebDeviceColumns(void) { const uint32_t max_columns = 8; uint32_t rows = TasmotaGlobal.devices_present / max_columns; if (TasmotaGlobal.devices_present % max_columns) { rows++; } uint32_t cols = TasmotaGlobal.devices_present / rows; if (TasmotaGlobal.devices_present % rows) { cols++; } return cols; } #ifdef USE_LIGHT void WebSliderColdWarm(void) { WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Cold Warm PSTR("a"), // a - Unique HTML id PSTR("#eff"), PSTR("#f81"), // 6500k in RGB (White) to 2500k in RGB (Warm Yellow) 1, // sl1 153, 500, // Range color temperature LightGetColorTemp(), 't', 0); // t0 - Value id releated to lc("t0", value) and WebGetArg("t0", tmp, sizeof(tmp)); } #endif // USE_LIGHT void HandleRoot(void) { if (CaptivePortal()) { return; } // If captive portal redirect instead of displaying the page. if (Webserver->hasArg(F("rst"))) { WebRestart(0); return; } if (WifiIsInManagerMode()) { #ifndef FIRMWARE_MINIMAL if (strlen(SettingsText(SET_WEBPWD)) && !(Webserver->hasArg(F("USER1"))) && !(Webserver->hasArg(F("PASS1"))) && HTTP_MANAGER_RESET_ONLY != Web.state) { HandleWifiLogin(); } else { if (!strlen(SettingsText(SET_WEBPWD)) || (((Webserver->arg(F("USER1")) == WEB_USERNAME ) && (Webserver->arg(F("PASS1")) == SettingsText(SET_WEBPWD) )) || HTTP_MANAGER_RESET_ONLY == Web.state)) { if (!Web.initial_config) { Web.initial_config = !strlen(SettingsText(SET_STASSID1)); if (Web.initial_config) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP "Blank Device - Initial Configuration")); } } HandleWifiConfiguration(); } else { // wrong user and pass HandleWifiLogin(); } } #endif // Not FIRMWARE_MINIMAL return; } if (HandleRootStatusRefresh()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_MAIN_MENU)); char stemp[33]; WSContentStart_P(PSTR(D_MAIN_MENU)); #ifdef USE_SCRIPT_WEB_DISPLAY WSContentSend_P(HTTP_SCRIPT_ROOT, Settings.web_refresh, Settings.web_refresh); #else WSContentSend_P(HTTP_SCRIPT_ROOT, Settings.web_refresh); #endif WSContentSend_P(HTTP_SCRIPT_ROOT_PART2); WSContentSendStyle(); WSContentSend_P(PSTR("
")); if (TasmotaGlobal.devices_present) { #ifdef USE_LIGHT if (TasmotaGlobal.light_type) { uint8_t light_subtype = TasmotaGlobal.light_type &7; if (!Settings.flag3.pwm_multi_channels) { // SetOption68 0 - Enable multi-channels PWM instead of Color PWM bool split_white = ((LST_RGBW <= light_subtype) && (TasmotaGlobal.devices_present > 1)); // Only on RGBW or RGBCW and SetOption37 128 if ((LST_COLDWARM == light_subtype) || ((LST_RGBCW == light_subtype) && !split_white)) { WebSliderColdWarm(); } if (light_subtype > 2) { // No W or CW uint16_t hue; uint8_t sat; LightGetHSB(&hue, &sat, nullptr); WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Hue PSTR("b"), // b - Unique HTML id PSTR("#800"), PSTR("#f00 5%,#ff0 20%,#0f0 35%,#0ff 50%,#00f 65%,#f0f 80%,#f00 95%,#800"), // Hue colors 2, // sl2 - Unique range HTML id - Used as source for Saturation end color 1, 359, // Range valid Hue hue, 'h', 0); // h0 - Value id uint8_t dcolor = changeUIntScale(Settings.light_dimmer, 0, 100, 0, 255); char scolor[8]; snprintf_P(scolor, sizeof(scolor), PSTR("#%02X%02X%02X"), dcolor, dcolor, dcolor); // Saturation start color from Black to White uint8_t red, green, blue; HsToRgb(hue, 255, &red, &green, &blue); snprintf_P(stemp, sizeof(stemp), PSTR("#%02X%02X%02X"), red, green, blue); // Saturation end color WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Saturation PSTR("s"), // s - Unique HTML id related to eb('s').style.background='linear-gradient(to right,rgb('+sl+'%%,'+sl+'%%,'+sl+'%%),hsl('+eb('sl2').value+',100%%,50%%))'; scolor, stemp, // Brightness to max current color 3, // sl3 - Unique range HTML id - Not used 0, 100, // Range 0 to 100% changeUIntScale(sat, 0, 255, 0, 100), 'n', 0); // n0 - Value id } WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Brightness - Black to White PSTR("c"), // c - Unique HTML id PSTR("#000"), PSTR("#fff"), // Black to White 4, // sl4 - Unique range HTML id - Used as source for Saturation begin color Settings.flag3.slider_dimmer_stay_on, 100, // Range 0/1 to 100% (SetOption77 - Do not power off if slider moved to far left) Settings.light_dimmer, 'd', 0); // d0 - Value id is related to lc("d0", value) and WebGetArg("d0", tmp, sizeof(tmp)); if (split_white) { // SetOption37 128 if (LST_RGBCW == light_subtype) { WebSliderColdWarm(); } WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // White brightness - Black to White PSTR("f"), // f - Unique HTML id PSTR("#000"), PSTR("#fff"), // Black to White 5, // sl5 - Unique range HTML id - Not used Settings.flag3.slider_dimmer_stay_on, 100, // Range 0/1 to 100% (SetOption77 - Do not power off if slider moved to far left) LightGetDimmer(2), 'w', 0); // w0 - Value id is related to lc("w0", value) and WebGetArg("w0", tmp, sizeof(tmp)); } } else { // Settings.flag3.pwm_multi_channels - SetOption68 1 - Enable multi-channels PWM instead of Color PWM uint32_t pwm_channels = light_subtype > LST_MAX ? LST_MAX : light_subtype; stemp[0] = 'e'; stemp[1] = '0'; stemp[2] = '\0'; // d0 for (uint32_t i = 0; i < pwm_channels; i++) { stemp[1]++; // e1 to e5 - Make unique ids WSContentSend_P(HTTP_MSG_SLIDER_GRADIENT, // Channel brightness - Black to White stemp, // e1 to e5 - Unique HTML id PSTR("#000"), PSTR("#fff"), // Black to White i+1, // sl1 to sl5 - Unique range HTML id - Not used 1, 100, // Range 1 to 100% changeUIntScale(Settings.light_color[i], 0, 255, 0, 100), 'e', i+1); // e1 to e5 - Value id } } // Settings.flag3.pwm_multi_channels } #endif // USE_LIGHT #ifdef USE_SHUTTER if (Settings.flag3.shutter_mode) { // SetOption80 - Enable shutter support for (uint32_t i = 0; i < TasmotaGlobal.shutters_present; i++) { WSContentSend_P(HTTP_MSG_SLIDER_SHUTTER, Settings.shutter_position[i], i+1); } } #endif // USE_SHUTTER WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("
")); #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { WSContentSend_P(HTTP_DEVICE_CONTROL, 36, 1, (strlen(SettingsText(SET_BUTTON1))) ? SettingsText(SET_BUTTON1) : PSTR(D_BUTTON_TOGGLE), ""); for (uint32_t i = 0; i < MaxFanspeed(); i++) { snprintf_P(stemp, sizeof(stemp), PSTR("%d"), i); WSContentSend_P(HTTP_DEVICE_CONTROL, 16, i +2, (strlen(SettingsText(SET_BUTTON2 + i))) ? SettingsText(SET_BUTTON2 + i) : stemp, ""); } } else { #endif // USE_SONOFF_IFAN uint32_t cols = WebDeviceColumns(); for (uint32_t idx = 1; idx <= TasmotaGlobal.devices_present; idx++) { bool set_button = ((idx <= MAX_BUTTON_TEXT) && strlen(SettingsText(SET_BUTTON1 + idx -1))); #ifdef USE_SHUTTER int32_t ShutterWebButton; if (ShutterWebButton = IsShutterWebButton(idx)) { WSContentSend_P(HTTP_DEVICE_CONTROL, 100 / cols, idx, (set_button) ? SettingsText(SET_BUTTON1 + idx -1) : ((Settings.shutter_options[abs(ShutterWebButton)-1] & 2) /* is locked */ ? "-" : ((Settings.shutter_options[abs(ShutterWebButton)-1] & 8) /* invert web buttons */ ? ((ShutterWebButton>0) ? "▼" : "▲") : ((ShutterWebButton>0) ? "▲" : "▼"))), ""); } else { #endif // USE_SHUTTER snprintf_P(stemp, sizeof(stemp), PSTR(" %d"), idx); WSContentSend_P(HTTP_DEVICE_CONTROL, 100 / cols, idx, (set_button) ? SettingsText(SET_BUTTON1 + idx -1) : (cols < 5) ? PSTR(D_BUTTON_TOGGLE) : "", (set_button) ? "" : (TasmotaGlobal.devices_present > 1) ? stemp : ""); #ifdef USE_SHUTTER } #endif // USE_SHUTTER if (0 == idx % cols) { WSContentSend_P(PSTR("")); } } #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN WSContentSend_P(PSTR("
%s
")); } #ifdef USE_TUYA_MCU if (IsModuleTuya()) { if (AsModuleTuyaMS()) { WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("
")); snprintf_P(stemp, sizeof(stemp), PSTR("" D_JSON_IRHVAC_MODE "")); WSContentSend_P(HTTP_DEVICE_CONTROL, 26, TasmotaGlobal.devices_present + 1, (strlen(SettingsText(SET_BUTTON1 + TasmotaGlobal.devices_present))) ? SettingsText(SET_BUTTON1 + TasmotaGlobal.devices_present) : stemp, ""); WSContentSend_P(PSTR("")); } } #endif // USE_TUYA_MCU #ifdef USE_SONOFF_RF if (SONOFF_BRIDGE == TasmotaGlobal.module_type) { WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("")); uint32_t idx = 0; for (uint32_t i = 0; i < 4; i++) { if (idx > 0) { WSContentSend_P(PSTR("")); } for (uint32_t j = 0; j < 4; j++) { idx++; snprintf_P(stemp, sizeof(stemp), PSTR("%d"), idx); WSContentSend_P(PSTR(""), idx, // &k is related to WebGetArg("k", tmp, sizeof(tmp)); (strlen(SettingsText(SET_BUTTON1 + idx -1))) ? SettingsText(SET_BUTTON1 + idx -1) : stemp); } } WSContentSend_P(PSTR("")); } #endif // USE_SONOFF_RF #ifndef FIRMWARE_MINIMAL XdrvCall(FUNC_WEB_ADD_MAIN_BUTTON); XsnsCall(FUNC_WEB_ADD_MAIN_BUTTON); #endif // Not FIRMWARE_MINIMAL if (HTTP_ADMIN == Web.state) { #ifdef FIRMWARE_MINIMAL WSContentSpaceButton(BUTTON_FIRMWARE_UPGRADE); WSContentButton(BUTTON_CONSOLE); #else WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentButton(BUTTON_INFORMATION); WSContentButton(BUTTON_FIRMWARE_UPGRADE); if (!WebUseManagementSubmenu()) { WSContentButton(BUTTON_CONSOLE); } else { WSContentButton(BUTTON_MANAGEMENT); } #endif // Not FIRMWARE_MINIMAL WSContentButton(BUTTON_RESTART); } WSContentStop(); } bool HandleRootStatusRefresh(void) { if (!WebAuthenticate()) { Webserver->requestAuthentication(); return true; } if (!Webserver->hasArg("m")) { // Status refresh requested return false; } #ifdef USE_SCRIPT_WEB_DISPLAY Script_Check_HTML_Setvars(); #endif char tmp[8]; // WebGetArg numbers only char svalue[32]; // Command and number parameter char webindex[5]; // WebGetArg name WebGetArg(PSTR("o"), tmp, sizeof(tmp)); // 1 - 16 Device number for button Toggle or Fanspeed if (strlen(tmp)) { ShowWebSource(SRC_WEBGUI); uint32_t device = atoi(tmp); #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { if (device < 2) { ExecuteCommandPower(1, POWER_TOGGLE, SRC_IGNORE); } else { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_FANSPEED " %d"), device -2); ExecuteCommand(svalue, SRC_WEBGUI); } } else { #endif // USE_SONOFF_IFAN #ifdef USE_TUYA_MCU if (IsModuleTuya()) { if (device <= TasmotaGlobal.devices_present) { ExecuteCommandPower(device, POWER_TOGGLE, SRC_IGNORE); } else { if (AsModuleTuyaMS() && device == TasmotaGlobal.devices_present + 1) { uint8_t dpId = TuyaGetDpId(TUYA_MCU_FUNC_MODESET); snprintf_P(svalue, sizeof(svalue), PSTR("Tuyasend4 %d,%d"), dpId, !TuyaModeSet()); ExecuteCommand(svalue, SRC_WEBGUI); } } } else { #endif // USE_TUYA_MCU #ifdef USE_SHUTTER int32_t ShutterWebButton; if (ShutterWebButton = IsShutterWebButton(device)) { snprintf_P(svalue, sizeof(svalue), PSTR("ShutterPosition%d %s"), abs(ShutterWebButton), (ShutterWebButton>0) ? PSTR(D_CMND_SHUTTER_STOPOPEN) : PSTR(D_CMND_SHUTTER_STOPCLOSE)); ExecuteWebCommand(svalue); } else { #endif // USE_SHUTTER ExecuteCommandPower(device, POWER_TOGGLE, SRC_IGNORE); #ifdef USE_SHUTTER } #endif // USE_SHUTTER #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN #ifdef USE_TUYA_MCU } #endif // USE_TUYA_MCU } #ifdef USE_LIGHT WebGetArg(PSTR("d0"), tmp, sizeof(tmp)); // 0 - 100 Dimmer value if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_DIMMER " %s"), tmp); ExecuteWebCommand(svalue); } WebGetArg(PSTR("w0"), tmp, sizeof(tmp)); // 0 - 100 White value if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_WHITE " %s"), tmp); ExecuteWebCommand(svalue); } uint32_t light_device = LightDevice(); // Channel number offset uint32_t pwm_channels = (TasmotaGlobal.light_type & 7) > LST_MAX ? LST_MAX : (TasmotaGlobal.light_type & 7); for (uint32_t j = 0; j < pwm_channels; j++) { snprintf_P(webindex, sizeof(webindex), PSTR("e%d"), j +1); WebGetArg(webindex, tmp, sizeof(tmp)); // 0 - 100 percent if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_CHANNEL "%d %s"), j +light_device, tmp); ExecuteWebCommand(svalue); } } WebGetArg(PSTR("t0"), tmp, sizeof(tmp)); // 153 - 500 Color temperature if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_COLORTEMPERATURE " %s"), tmp); ExecuteWebCommand(svalue); } WebGetArg(PSTR("h0"), tmp, sizeof(tmp)); // 0 - 359 Hue value if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_HSBCOLOR "1 %s"), tmp); ExecuteWebCommand(svalue); } WebGetArg(PSTR("n0"), tmp, sizeof(tmp)); // 0 - 99 Saturation value if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_HSBCOLOR "2 %s"), tmp); ExecuteWebCommand(svalue); } #endif // USE_LIGHT #ifdef USE_SHUTTER for (uint32_t j = 1; j <= TasmotaGlobal.shutters_present; j++) { snprintf_P(webindex, sizeof(webindex), PSTR("u%d"), j); WebGetArg(webindex, tmp, sizeof(tmp)); // 0 - 100 percent if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR("ShutterPosition%d %s"), j, tmp); ExecuteWebCommand(svalue); } } #endif // USE_SHUTTER #ifdef USE_SONOFF_RF WebGetArg(PSTR("k"), tmp, sizeof(tmp)); // 1 - 16 Pre defined RF keys if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR(D_CMND_RFKEY "%s"), tmp); ExecuteWebCommand(svalue); } #endif // USE_SONOFF_RF #ifdef USE_ZIGBEE WebGetArg(PSTR("zbj"), tmp, sizeof(tmp)); if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR("ZbPermitJoin")); ExecuteWebCommand(svalue); } WebGetArg(PSTR("zbr"), tmp, sizeof(tmp)); if (strlen(tmp)) { snprintf_P(svalue, sizeof(svalue), PSTR("ZbMap")); ExecuteWebCommand(svalue); } #endif // USE_ZIGBEE #ifdef USE_WEB_SSE WSContentBegin(200, CT_STREAM); WSContentSend_P(PSTR("data: ")); #else WSContentBegin(200, CT_HTML); #endif // USE_WEB_SSE WSContentSend_P(PSTR("{t}")); XsnsCall(FUNC_WEB_SENSOR); XdrvCall(FUNC_WEB_SENSOR); WSContentSend_P(PSTR("")); if (TasmotaGlobal.devices_present) { WSContentSend_P(PSTR("{t}")); #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { WSContentSend_P(HTTP_DEVICE_STATE, 36, (bitRead(TasmotaGlobal.power, 0)) ? PSTR("bold") : PSTR("normal"), 54, GetStateText(bitRead(TasmotaGlobal.power, 0))); uint32_t fanspeed = GetFanspeed(); snprintf_P(svalue, sizeof(svalue), PSTR("%d"), fanspeed); WSContentSend_P(HTTP_DEVICE_STATE, 64, (fanspeed) ? PSTR("bold") : PSTR("normal"), 54, (fanspeed) ? svalue : GetStateText(0)); } else { #endif // USE_SONOFF_IFAN uint32_t cols = WebDeviceColumns(); uint32_t fontsize = (cols < 5) ? 70 - (cols * 8) : 32; for (uint32_t idx = 1; idx <= TasmotaGlobal.devices_present; idx++) { snprintf_P(svalue, sizeof(svalue), PSTR("%d"), bitRead(TasmotaGlobal.power, idx -1)); WSContentSend_P(HTTP_DEVICE_STATE, 100 / cols, (bitRead(TasmotaGlobal.power, idx -1)) ? PSTR("bold") : PSTR("normal"), fontsize, (cols < 5) ? GetStateText(bitRead(TasmotaGlobal.power, idx -1)) : svalue); if (0 == idx % cols) { WSContentSend_P(PSTR("")); } } #ifdef USE_SONOFF_IFAN } #endif // USE_SONOFF_IFAN WSContentSend_P(PSTR("")); } WSContentSend_P(PSTR("\n\n")); // Prep for SSE WSContentEnd(); return true; } #ifdef USE_SHUTTER int32_t IsShutterWebButton(uint32_t idx) { /* 0: Not a shutter, 1..4: shutter up idx, -1..-4: shutter down idx */ int32_t ShutterWebButton = 0; if (Settings.flag3.shutter_mode) { // SetOption80 - Enable shutter support for (uint32_t i = 0; i < MAX_SHUTTERS; i++) { if (Settings.shutter_startrelay[i] && ((Settings.shutter_startrelay[i] == idx) || (Settings.shutter_startrelay[i] == (idx-1)))) { ShutterWebButton = (Settings.shutter_startrelay[i] == idx) ? (i+1): (-1-i); break; } } } return ShutterWebButton; } #endif // USE_SHUTTER /*-------------------------------------------------------------------------------------------*/ #ifndef FIRMWARE_MINIMAL void HandleConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURATION)); WSContentStart_P(PSTR(D_CONFIGURATION)); WSContentSendStyle(); WSContentButton(BUTTON_MODULE); WSContentButton(BUTTON_WIFI); XdrvCall(FUNC_WEB_ADD_BUTTON); XsnsCall(FUNC_WEB_ADD_BUTTON); WSContentButton(BUTTON_LOGGING); WSContentButton(BUTTON_OTHER); WSContentButton(BUTTON_TEMPLATE); WSContentSpaceButton(BUTTON_RESET_CONFIGURATION); WSContentButton(BUTTON_BACKUP); WSContentButton(BUTTON_RESTORE); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); } /*-------------------------------------------------------------------------------------------*/ void WSContentSendNiceLists(uint32_t option) { char stemp[30]; // Template number and Sensor name for (uint32_t i = 0; i < nitems(kGpioNiceList); i++) { // GPIO: }2'0'>None (0)}3}2'17'>Button1 (17)}3... if (option && (1 == i)) { WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX, AGPIO(GPIO_USER), PSTR(D_SENSOR_USER)); // }2'255'>User}3 } uint32_t ridx = pgm_read_word(kGpioNiceList + i) & 0xFFE0; uint32_t midx = BGPIO(ridx); WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX, ridx, GetTextIndexed(stemp, sizeof(stemp), midx, kSensorNames)); } WSContentSend_P(PSTR("\";")); WSContentSend_P(PSTR("hs=[")); uint32_t midx; bool first_done = false; for (uint32_t i = 0; i < nitems(kGpioNiceList); i++) { // hs=[36,68,100,132,168,200,232,264,292,324,356,388,421,453]; midx = pgm_read_word(kGpioNiceList + i); if (midx & 0x001F) { if (first_done) { WSContentSend_P(PSTR(",")); } WSContentSend_P(PSTR("%d"), midx); first_done = true; } } #ifdef ESP8266 #ifdef USE_ADC for (uint32_t i = 0; i < nitems(kAdcNiceList); i++) { // hs=[36,68,100,132,168,200,232,264,292,324,356,388,421,453]; midx = pgm_read_word(kAdcNiceList + i); if (midx & 0x001F) { if (first_done) { WSContentSend_P(PSTR(",")); } WSContentSend_P(PSTR("%d"), midx); first_done = true; } } #endif // USE_ADC #endif // ESP8266 WSContentSend_P(PSTR("];")); } #ifdef ESP8266 #ifdef USE_ADC void WSContentSendAdcNiceList(uint32_t option) { char stemp[30]; // Template number and Sensor name WSContentSend_P(PSTR("os=\"")); for (uint32_t i = 0; i < nitems(kAdcNiceList); i++) { // GPIO: }2'0'>None}3}2'17'>Analog}3... if (option && (1 == i)) { WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX, AGPIO(GPIO_USER), PSTR(D_SENSOR_USER)); // }2'15'>User}3 } uint32_t ridx = pgm_read_word(kAdcNiceList + i) & 0xFFE0; uint32_t midx = BGPIO(ridx); WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_NO_INDEX, ridx, GetTextIndexed(stemp, sizeof(stemp), midx, kSensorNames)); } } #endif // USE_ADC #endif // ESP8266 /*-------------------------------------------------------------------------------------------*/ void HandleTemplateConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } if (Webserver->hasArg(F("save"))) { TemplateSaveSettings(); WebRestart(1); return; } char stemp[30]; // Template number and Sensor name WebGetArg(PSTR("t"), stemp, sizeof(stemp)); // 0 - 69 Template number if (strlen(stemp)) { uint32_t module = atoi(stemp); uint32_t module_save = Settings.module; Settings.module = module; myio template_gp; TemplateGpios(&template_gp); gpio_flag flag = ModuleFlag(); Settings.module = module_save; WSContentBegin(200, CT_PLAIN); WSContentSend_P(PSTR("%s}1"), AnyModuleName(module).c_str()); // NAME: Generic for (uint32_t i = 0; i < nitems(template_gp.io); i++) { // 17,148,29,149,7,255,255,255,138,255,139,255,255 if (!FlashPin(i)) { WSContentSend_P(PSTR("%s%d"), (i>0)?",":"", template_gp.io[i]); } } WSContentSend_P(PSTR("}1%d}1%d"), flag, Settings.user_template_base); // FLAG: 1 BASE: 17 WSContentEnd(); return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURE_TEMPLATE)); WSContentStart_P(PSTR(D_CONFIGURE_TEMPLATE)); WSContentSend_P(HTTP_SCRIPT_MODULE_TEMPLATE); WSContentSend_P(HTTP_SCRIPT_TEMPLATE); WSContentSendNiceLists(1); WSContentSend_P(HTTP_SCRIPT_TEMPLATE2); #ifdef ESP8266 #ifdef USE_ADC WSContentSendAdcNiceList(1); WSContentSend_P(HTTP_SCRIPT_TEMPLATE3); #endif // USE_ADC #endif // ESP8266 WSContentSend_P(HTTP_SCRIPT_TEMPLATE4); for (uint32_t i = 0; i < sizeof(kModuleNiceList); i++) { // "}2'%d'>%s (%d)}3" - "}2'0'>Sonoff Basic (1)}3" uint32_t midx = pgm_read_byte(kModuleNiceList + i); WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_INDEX, midx, AnyModuleName(midx).c_str(), midx +1); } WSContentSend_P(HTTP_SCRIPT_TEMPLATE5); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_TEMPLATE); WSContentSend_P(HTTP_TABLE100); WSContentSend_P(PSTR("" D_TEMPLATE_NAME "" "" D_BASE_TYPE "" "" "
")); WSContentSend_P(HTTP_TABLE100); for (uint32_t i = 0; i < MAX_GPIO_PIN; i++) { if (!FlashPin(i)) { WSContentSend_P(PSTR("" D_GPIO "%d"), ((9==i)||(10==i)) ? WebColor(COL_TEXT_WARNING) : WebColor(COL_TEXT), i, (0==i) ? PSTR(" style='width:146px'") : "", i, i); WSContentSend_P(PSTR(""), i); } } WSContentSend_P(PSTR("")); gpio_flag flag = ModuleFlag(); if (flag.data) { WSContentSend_P(HTTP_FORM_TEMPLATE_FLAG); } WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } uint16_t WebGetGpioArg(uint32_t i) { char webindex[5]; // WebGetArg name snprintf_P(webindex, sizeof(webindex), PSTR("g%d"), i); char tmp[8]; // WebGetArg numbers only WebGetArg(webindex, tmp, sizeof(tmp)); // GPIO uint32_t gpio = (!strlen(tmp)) ? 0 : atoi(tmp); char webindex2[5]; // WebGetArg name snprintf_P(webindex2, sizeof(webindex2), PSTR("h%d"), i); char tmp2[8]; // WebGetArg numbers only WebGetArg(webindex2, tmp2, sizeof(tmp2)); uint32_t value2 = (!strlen(tmp2)) ? 0 : atoi(tmp2) -1; gpio += value2; return gpio; } void TemplateSaveSettings(void) { char tmp[TOPSZ]; // WebGetArg NAME and GPIO/BASE/FLAG byte value char command[300]; // Template command string WebGetArg(PSTR("s1"), tmp, sizeof(tmp)); // NAME snprintf_P(command, sizeof(command), PSTR(D_CMND_TEMPLATE " {\"" D_JSON_NAME "\":\"%s\",\"" D_JSON_GPIO "\":["), tmp); uint32_t j = 0; for (uint32_t i = 0; i < nitems(Settings.user_template.gp.io); i++) { if (6 == i) { j = 9; } if (8 == i) { j = 12; } snprintf_P(command, sizeof(command), PSTR("%s%s%d"), command, (i>0)?",":"", WebGetGpioArg(j)); j++; } uint32_t flag = 0; char webindex[5]; // WebGetArg name for (uint32_t i = 0; i < GPIO_FLAG_USED; i++) { snprintf_P(webindex, sizeof(webindex), PSTR("c%d"), i); uint32_t state = Webserver->hasArg(webindex) << i; // FLAG flag += state; } WebGetArg(PSTR("g99"), tmp, sizeof(tmp)); // BASE uint32_t base = atoi(tmp) +1; snprintf_P(command, sizeof(command), PSTR("%s],\"" D_JSON_FLAG "\":%d,\"" D_JSON_BASE "\":%d}"), command, flag, base); ExecuteWebCommand(command); } /*-------------------------------------------------------------------------------------------*/ void HandleModuleConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } if (Webserver->hasArg(F("save"))) { ModuleSaveSettings(); WebRestart(1); return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURE_MODULE)); char stemp[30]; // Sensor name uint32_t midx; myio template_gp; TemplateGpios(&template_gp); WSContentStart_P(PSTR(D_CONFIGURE_MODULE)); WSContentSend_P(HTTP_SCRIPT_MODULE_TEMPLATE); WSContentSend_P(PSTR("function sl(){os=\"")); uint32_t vidx = 0; for (uint32_t i = 0; i <= sizeof(kModuleNiceList); i++) { // "}2'%d'>%s (%d)}3" - "}2'255'>UserTemplate (0)}3" - "}2'0'>Sonoff Basic (1)}3" if (0 == i) { midx = USER_MODULE; vidx = 0; } else { midx = pgm_read_byte(kModuleNiceList + i -1); vidx = midx +1; } WSContentSend_P(HTTP_MODULE_TEMPLATE_REPLACE_INDEX, midx, AnyModuleName(midx).c_str(), vidx); } WSContentSend_P(PSTR("\";sk(%d,99);os=\""), Settings.module); WSContentSendNiceLists(0); for (uint32_t i = 0; i < nitems(template_gp.io); i++) { if (ValidGPIO(i, template_gp.io[i])) { WSContentSend_P(PSTR("sk(%d,%d);"), TasmotaGlobal.my_module.io[i], i); // g0 - g17 } } #ifdef ESP8266 #ifdef USE_ADC WSContentSendAdcNiceList(0); WSContentSend_P(PSTR("\";sk(%d," STR(ADC0_PIN) ");"), Settings.my_gp.io[(sizeof(myio) / 2) -1]); #endif // USE_ADC #endif // ESP8266 WSContentSend_P(PSTR("}wl(sl);")); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_MODULE, AnyModuleName(MODULE).c_str()); for (uint32_t i = 0; i < nitems(template_gp.io); i++) { if (ValidGPIO(i, template_gp.io[i])) { snprintf_P(stemp, 3, PINS_WEMOS +i*2); WSContentSend_P(PSTR("%s " D_GPIO "%d"), (WEMOS==TasmotaGlobal.module_type)?stemp:"", i, i, i); WSContentSend_P(PSTR(""), i); } } WSContentSend_P(PSTR("")); WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } void ModuleSaveSettings(void) { char tmp[8]; // WebGetArg numbers only WebGetArg(PSTR("g99"), tmp, sizeof(tmp)); // Module uint32_t new_module = (!strlen(tmp)) ? MODULE : atoi(tmp); Settings.last_module = Settings.module; Settings.module = new_module; SetModuleType(); myio template_gp; TemplateGpios(&template_gp); for (uint32_t i = 0; i < nitems(template_gp.io); i++) { if (Settings.last_module != new_module) { Settings.my_gp.io[i] = GPIO_NONE; } else { if (ValidGPIO(i, template_gp.io[i])) { Settings.my_gp.io[i] = WebGetGpioArg(i); // Gpio } } } char command[32]; snprintf_P(command, sizeof(command), PSTR(D_CMND_BACKLOG "0 " D_CMND_MODULE ";" D_CMND_GPIO)); ExecuteWebCommand(command); } /*-------------------------------------------------------------------------------------------*/ const char kUnescapeCode[] = "&><\"\'\\"; const char kEscapeCode[] PROGMEM = "&|>|<|"|'|\"; String HtmlEscape(const String unescaped) { char escaped[10]; size_t ulen = unescaped.length(); String result = ""; for (size_t i = 0; i < ulen; i++) { char c = unescaped[i]; char *p = strchr(kUnescapeCode, c); if (p != nullptr) { result += GetTextIndexed(escaped, sizeof(escaped), p - kUnescapeCode, kEscapeCode); } else { result += c; } } return result; } void HandleWifiConfiguration(void) { char tmp[TOPSZ]; // Max length is currently 150 if (!HttpCheckPriviledgedAccess(!WifiIsInManagerMode())) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURE_WIFI)); if (Webserver->hasArg(F("save")) && HTTP_MANAGER_RESET_ONLY != Web.state) { if ( WifiIsInManagerMode() ) { // Test WIFI Connection to Router // As Tasmota is in this case in AP mode, a STA connection can be established too at the same time Web.wifi_test_counter = 9; // seconds to test user's proposed AP Web.wifiTest = WIFI_TESTING; Web.save_data_counter = TasmotaGlobal.save_data_counter; TasmotaGlobal.save_data_counter = 0; // Stop auto saving data - Updating Settings Settings.save_data = 0; Web.old_wificonfig = TasmotaGlobal.wifi_state_flag; Settings.sta_config = WIFI_MANAGER; TasmotaGlobal.wifi_state_flag = Settings.sta_config; TasmotaGlobal.sleep = 0; // Disable sleep TasmotaGlobal.restart_flag = 0; // No restart TasmotaGlobal.ota_state_flag = 0; // No OTA // TasmotaGlobal.blinks = 0; // Disable blinks initiated by WifiManager WebGetArg(PSTR("s1"), tmp, sizeof(tmp)); // SSID1 SettingsUpdateText(SET_STASSID1, tmp); WebGetArg(PSTR("p1"), tmp, sizeof(tmp)); // PASSWORD1 SettingsUpdateText(SET_STAPWD1, tmp); AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_CONNECTING_TO_AP " %s " D_AS " %s ..."), SettingsText(SET_STASSID1), TasmotaGlobal.hostname); WiFi.begin(SettingsText(SET_STASSID1), SettingsText(SET_STAPWD1)); WebRestart(2); } else { // STATION MODE or MIXED // Save the config and restart WifiSaveSettings(); WebRestart(1); } return; } if ( WIFI_TEST_FINISHED_SUCCESSFUL == Web.wifiTest ) { Web.wifiTest = WIFI_NOT_TESTING; #if (RESTART_AFTER_INITIAL_WIFI_CONFIG) WebRestart(3); #else HandleRoot(); #endif } WSContentStart_P(PSTR(D_CONFIGURE_WIFI), !WifiIsInManagerMode()); WSContentSend_P(HTTP_SCRIPT_WIFI); if (WifiIsInManagerMode()) { WSContentSend_P(HTTP_SCRIPT_HIDE); } if (WIFI_TESTING == Web.wifiTest) { WSContentSend_P(HTTP_SCRIPT_RELOAD_TIME, HTTP_RESTART_RECONNECT_TIME); } #ifdef USE_ENHANCED_GUI_WIFI_SCAN WSContentSendStyle_P(HTTP_HEAD_STYLE_SSI, WebColor(COL_TEXT)); #else WSContentSendStyle(); #endif // USE_ENHANCED_GUI_WIFI_SCAN bool limitScannedNetworks = true; if (HTTP_MANAGER_RESET_ONLY != Web.state) { if (WIFI_TESTING == Web.wifiTest) { limitScannedNetworks = false; } else { if (Webserver->hasArg(F("scan"))) { limitScannedNetworks = false; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI "Scanning...")); #ifdef USE_EMULATION UdpDisconnect(); #endif // USE_EMULATION int n = WiFi.scanNetworks(); AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_SCAN_DONE)); if (0 == n) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_NO_NETWORKS_FOUND)); WSContentSend_P(PSTR(D_NO_NETWORKS_FOUND)); limitScannedNetworks = false; // in order to show D_SCAN_FOR_WIFI_NETWORKS } else { //sort networks int indices[n]; for (uint32_t i = 0; i < n; i++) { indices[i] = i; } // RSSI SORT for (uint32_t i = 0; i < n; i++) { for (uint32_t j = i + 1; j < n; j++) { if (WiFi.RSSI(indices[j]) > WiFi.RSSI(indices[i])) { std::swap(indices[i], indices[j]); } } } uint32_t networksToShow = n; if ((limitScannedNetworks) && (networksToShow > MAX_WIFI_NETWORKS_TO_SHOW)) { networksToShow = MAX_WIFI_NETWORKS_TO_SHOW; } if (WifiIsInManagerMode()) { WSContentTextCenterStart(WebColor(COL_TEXT)); WSContentSend_P(PSTR(D_SELECT_YOUR_WIFI_NETWORK "

")); } #ifdef USE_ENHANCED_GUI_WIFI_SCAN //display networks in page bool skipduplicated; int ssid_showed = 0; for (uint32_t i = 0; i < networksToShow; i++) { if (indices[i] < n) { int32_t rssi = WiFi.RSSI(indices[i]); String ssid = WiFi.SSID(indices[i]); DEBUG_CORE_LOG(PSTR(D_LOG_WIFI D_SSID " %s, " D_BSSID " %s, " D_CHANNEL " %d, " D_RSSI " %d"), ssid.c_str(), WiFi.BSSIDstr(indices[i]).c_str(), WiFi.channel(indices[i]), rssi); String ssid_copy = ssid; if (!ssid_copy.length()) { ssid_copy = F("no_name"); } // Print SSID if (!limitScannedNetworks) { WSContentSend_P(PSTR("
%s
"), HtmlEscape(ssid_copy).c_str()); } skipduplicated = false; String nextSSID = ""; // Handle all APs with the same SSID for (uint32_t j = 0; j < n; j++) { if ((indices[j] < n) && ((nextSSID = WiFi.SSID(indices[j])) == ssid)) { if (!skipduplicated) { // Update RSSI / quality rssi = WiFi.RSSI(indices[j]); uint32_t rssi_as_quality = WifiGetRssiAsQuality(rssi); uint32_t num_bars = changeUIntScale(rssi_as_quality, 0, 100, 0, 4); WSContentSend_P(PSTR("
"), rssi, rssi_as_quality); if (limitScannedNetworks) { // Print SSID and item WSContentSend_P(PSTR("%s
"), HtmlEscape(ssid_copy).c_str()); ssid_showed++; skipduplicated = true; // For the simplified page, just show 1 SSID if there are many Networks with the same } else { // Print item WSContentSend_P(PSTR("%s(%d)
"), WiFi.BSSIDstr(indices[j]).c_str(), WiFi.channel(indices[j]) ); } // Print signal strength indicator for (uint32_t k = 0; k < 4; ++k) { WSContentSend_P(PSTR(""), k, (num_bars < k) ? PSTR(" o30") : PSTR("")); } WSContentSend_P(PSTR("
")); } else { if (ssid_showed <= networksToShow ) { networksToShow++; } } indices[j] = n; } delay(0); } if (!limitScannedNetworks) { WSContentSend_P(PSTR("
")); } } } #else // No USE_ENHANCED_GUI_WIFI_SCAN // remove duplicates ( must be RSSI sorted ) for (uint32_t i = 0; i < n; i++) { if (-1 == indices[i]) { continue; } String cssid = WiFi.SSID(indices[i]); uint32_t cschn = WiFi.channel(indices[i]); for (uint32_t j = i + 1; j < n; j++) { if ((cssid == WiFi.SSID(indices[j])) && (cschn == WiFi.channel(indices[j]))) { DEBUG_CORE_LOG(PSTR(D_LOG_WIFI D_DUPLICATE_ACCESSPOINT " %s"), WiFi.SSID(indices[j]).c_str()); indices[j] = -1; // set dup aps to index -1 } } } //display networks in page for (uint32_t i = 0; i < networksToShow; i++) { if (-1 == indices[i]) { continue; } // skip dups int32_t rssi = WiFi.RSSI(indices[i]); DEBUG_CORE_LOG(PSTR(D_LOG_WIFI D_SSID " %s, " D_BSSID " %s, " D_CHANNEL " %d, " D_RSSI " %d"), WiFi.SSID(indices[i]).c_str(), WiFi.BSSIDstr(indices[i]).c_str(), WiFi.channel(indices[i]), rssi); int quality = WifiGetRssiAsQuality(rssi); String ssid_copy = WiFi.SSID(indices[i]); if (!ssid_copy.length()) { ssid_copy = F("no_name"); } WSContentSend_P(PSTR("
%s (%d) %d%% (%d dBm)
"), HtmlEscape(ssid_copy).c_str(), WiFi.channel(indices[i]), quality, rssi ); delay(0); } #endif // USE_ENHANCED_GUI_WIFI_SCAN WSContentSend_P(PSTR("
")); } } WSContentSend_P(PSTR("
"), (limitScannedNetworks) ? PSTR(D_SHOW_MORE_WIFI_NETWORKS) : PSTR(D_SCAN_FOR_WIFI_NETWORKS)); WSContentSend_P(HTTP_FORM_WIFI_PART1, (WifiIsInManagerMode()) ? "" : PSTR(" (" STA_SSID1 ")"), SettingsText(SET_STASSID1)); if (WifiIsInManagerMode()) { // As WIFI_HOSTNAME may contain %s-%04d it cannot be part of HTTP_FORM_WIFI where it will exception WSContentSend_P(PSTR(">

")); } else { WSContentSend_P(HTTP_FORM_WIFI_PART2, SettingsText(SET_STASSID2), WIFI_HOSTNAME, WIFI_HOSTNAME, SettingsText(SET_HOSTNAME), SettingsText(SET_CORS)); } WSContentSend_P(HTTP_FORM_END); } if (WifiIsInManagerMode()) { #ifndef FIRMWARE_MINIMAL WSContentTextCenterStart(WebColor(COL_TEXT_WARNING)); WSContentSend_P(PSTR("

")); if (WIFI_TESTING == Web.wifiTest) { WSContentSend_P(PSTR(D_TRYING_TO_CONNECT "
%s

"), SettingsText(SET_STASSID1)); } else if (WIFI_TEST_FINISHED_BAD == Web.wifiTest) { WSContentSend_P(PSTR(D_CONNECT_FAILED_TO " %s
" D_CHECK_CREDENTIALS "
"), SettingsText(SET_STASSID1)); } // More Options Button WSContentSend_P(PSTR("

"), (WIFI_TEST_FINISHED_BAD == Web.wifiTest) ? "none" : Web.initial_config ? "block" : "none", Web.initial_config ? "block" : "none" ); WSContentSpaceButton(BUTTON_RESTORE, !Web.initial_config); WSContentButton(BUTTON_RESET_CONFIGURATION, !Web.initial_config); #endif // FIRMWARE_MINIMAL WSContentSpaceButton(BUTTON_RESTART, !Web.initial_config); } else { WSContentSpaceButton(BUTTON_CONFIGURATION); } WSContentStop(); } void WifiSaveSettings(void) { char tmp1[TOPSZ]; WebGetArg(PSTR("h"), tmp1, sizeof(tmp1)); // Host name char tmp2[TOPSZ]; WebGetArg(PSTR("c"), tmp2, sizeof(tmp2)); // Cors domain char tmp3[TOPSZ]; WebGetArg(PSTR("s1"), tmp3, sizeof(tmp3)); // Ssid1 char tmp4[TOPSZ]; WebGetArg(PSTR("s2"), tmp4, sizeof(tmp4)); // Ssid2 char tmp5[TOPSZ]; WebGetArg(PSTR("p1"), tmp5, sizeof(tmp5)); // Password1 char tmp6[TOPSZ]; WebGetArg(PSTR("p2"), tmp6, sizeof(tmp6)); // Password2 char command[300]; snprintf_P(command, sizeof(command), PSTR(D_CMND_BACKLOG "0 " D_CMND_HOSTNAME " %s;" D_CMND_CORS " %s;" D_CMND_SSID "1 %s;" D_CMND_SSID "2 %s;" D_CMND_PASSWORD "3 %s;" D_CMND_PASSWORD "4 %s"), (!strlen(tmp1)) ? "1" : tmp1, (!strlen(tmp2)) ? "1" : tmp2, (!strlen(tmp3)) ? "1" : tmp3, (!strlen(tmp4)) ? "1" : tmp4, (!strlen(tmp5)) ? "\"" : (strlen(tmp5) < 5) ? "" : tmp5, (!strlen(tmp6)) ? "\"" : (strlen(tmp6) < 5) ? "" : tmp6); ExecuteWebCommand(command); } /*-------------------------------------------------------------------------------------------*/ void HandleLoggingConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURE_LOGGING)); if (Webserver->hasArg("save")) { LoggingSaveSettings(); HandleConfiguration(); return; } WSContentStart_P(PSTR(D_CONFIGURE_LOGGING)); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_LOG1); char stemp1[45]; char stemp2[32]; uint8_t dlevel[4] = { LOG_LEVEL_INFO, LOG_LEVEL_INFO, LOG_LEVEL_NONE, LOG_LEVEL_NONE }; for (uint32_t idx = 0; idx < 4; idx++) { if ((2==idx) && !Settings.flag.mqtt_enabled) { continue; } // SetOption3 - Enable MQTT uint32_t llevel = (0==idx)?Settings.seriallog_level:(1==idx)?Settings.weblog_level:(2==idx)?Settings.mqttlog_level:Settings.syslog_level; WSContentSend_P(PSTR("

%s (%s)

")); } WSContentSend_P(HTTP_FORM_LOG2, SettingsText(SET_SYSLOG_HOST), Settings.syslog_port, Settings.tele_period); WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } void LoggingSaveSettings(void) { char tmp1[CMDSZ]; WebGetArg(PSTR("l0"), tmp1, sizeof(tmp1)); // Serial log level char tmp2[CMDSZ]; WebGetArg(PSTR("l1"), tmp2, sizeof(tmp2)); // Web log level char tmp3[CMDSZ]; WebGetArg(PSTR("l2"), tmp3, sizeof(tmp3)); // Mqtt log level char tmp4[CMDSZ]; WebGetArg(PSTR("l3"), tmp4, sizeof(tmp4)); // Syslog level char tmp5[TOPSZ]; WebGetArg(PSTR("lh"), tmp5, sizeof(tmp5)); // Syslog host name char tmp6[CMDSZ]; WebGetArg(PSTR("lp"), tmp6, sizeof(tmp6)); // Syslog port number char tmp7[CMDSZ]; WebGetArg(PSTR("lt"), tmp7, sizeof(tmp7)); // Teleperiod char command[200]; snprintf_P(command, sizeof(command), PSTR(D_CMND_BACKLOG "0 " D_CMND_SERIALLOG " %s;" D_CMND_WEBLOG " %s;" D_CMND_MQTTLOG " %s;" D_CMND_SYSLOG " %s;" D_CMND_LOGHOST " %s;" D_CMND_LOGPORT " %s;" D_CMND_TELEPERIOD " %s"), (!strlen(tmp1)) ? STR(SERIAL_LOG_LEVEL) : tmp1, (!strlen(tmp2)) ? STR(WEB_LOG_LEVEL) : tmp2, (!strlen(tmp3)) ? STR(MQTT_LOG_LEVEL) : tmp3, (!strlen(tmp4)) ? STR(SYS_LOG_LEVEL) : tmp4, (!strlen(tmp5)) ? SYS_LOG_HOST : tmp5, (!strlen(tmp6)) ? STR(SYS_LOG_PORT) : tmp6, (!strlen(tmp7)) ? STR(TELE_PERIOD) : tmp7); ExecuteWebCommand(command); } /*-------------------------------------------------------------------------------------------*/ void HandleOtherConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURE_OTHER)); if (Webserver->hasArg(F("save"))) { OtherSaveSettings(); WebRestart(1); return; } WSContentStart_P(PSTR(D_CONFIGURE_OTHER)); WSContentSendStyle(); TemplateJson(); char stemp[strlen(TasmotaGlobal.mqtt_data) +1]; strlcpy(stemp, TasmotaGlobal.mqtt_data, sizeof(stemp)); // Get JSON template WSContentSend_P(HTTP_FORM_OTHER, stemp, (USER_MODULE == Settings.module) ? PSTR(" checked disabled") : "", (Settings.flag.mqtt_enabled) ? PSTR(" checked") : "", // SetOption3 - Enable MQTT SettingsText(SET_FRIENDLYNAME1), SettingsText(SET_DEVICENAME)); uint32_t maxfn = (TasmotaGlobal.devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : (!TasmotaGlobal.devices_present) ? 1 : TasmotaGlobal.devices_present; #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { maxfn = 1; } #endif // USE_SONOFF_IFAN for (uint32_t i = 0; i < maxfn; i++) { snprintf_P(stemp, sizeof(stemp), PSTR("%d"), i +1); WSContentSend_P(PSTR("" D_FRIENDLY_NAME " %d (" FRIENDLY_NAME "%s)

"), i +1, (i) ? stemp : "", i, (i) ? stemp : "", SettingsText(SET_FRIENDLYNAME1 + i)); } #ifdef USE_EMULATION #if defined(USE_EMULATION_WEMO) || defined(USE_EMULATION_HUE) WSContentSend_P(PSTR("

 " D_EMULATION " 

")); // Keep close to Friendlynames so do not use
for (uint32_t i = 0; i < EMUL_MAX; i++) { #ifndef USE_EMULATION_WEMO if (i == EMUL_WEMO) { i++; } #endif #ifndef USE_EMULATION_HUE if (i == EMUL_HUE) { i++; } #endif if (i < EMUL_MAX) { WSContentSend_P(PSTR("%s %s
"), // Different id only used for labels i, i, (i == Settings.flag2.emulation) ? PSTR(" checked") : "", GetTextIndexed(stemp, sizeof(stemp), i, kEmulationOptions), (i == EMUL_NONE) ? "" : (i == EMUL_WEMO) ? PSTR(D_SINGLE_DEVICE) : PSTR(D_MULTI_DEVICE)); } } WSContentSend_P(PSTR("

")); #endif // USE_EMULATION_WEMO || USE_EMULATION_HUE #endif // USE_EMULATION WSContentSend_P(HTTP_FORM_END); WSContentSpaceButton(BUTTON_CONFIGURATION); WSContentStop(); } void OtherSaveSettings(void) { char tmp1[400]; // Needs to hold complete ESP32 template of minimal 230 chars WebGetArg(PSTR("dn"), tmp1, sizeof(tmp1)); // Device name char tmp2[TOPSZ]; WebGetArg(PSTR("wp"), tmp2, sizeof(tmp2)); // Web password char command[600]; snprintf_P(command, sizeof(command), PSTR(D_CMND_BACKLOG "0 " D_CMND_WEBPASSWORD "2 %s;" D_CMND_SO "3 %d;" D_CMND_DEVICENAME " %s"), (!strlen(tmp2)) ? "\"" : (strlen(tmp2) < 5) ? "" : tmp2, Webserver->hasArg(F("b1")), // SetOption3 - Enable MQTT (!strlen(tmp1)) ? "\"" : tmp1); char webindex[5]; for (uint32_t i = 0; i < MAX_FRIENDLYNAMES; i++) { snprintf_P(webindex, sizeof(webindex), PSTR("a%d"), i); WebGetArg(webindex, tmp1, sizeof(tmp1)); // Friendly name 1 to 8 snprintf_P(command, sizeof(command), PSTR("%s;" D_CMND_FN"%d %s"), command, i +1, (!strlen(tmp1)) ? "\"" : tmp1); } #ifdef USE_EMULATION #if defined(USE_EMULATION_WEMO) || defined(USE_EMULATION_HUE) WebGetArg(PSTR("b2"), tmp1, sizeof(tmp1)); // Emulation snprintf_P(command, sizeof(command), PSTR("%s;" D_CMND_EMULATION " %s"), command, (!strlen(tmp1)) ? "0" : tmp1); #endif // USE_EMULATION_WEMO || USE_EMULATION_HUE #endif // USE_EMULATION WebGetArg(PSTR("t1"), tmp1, sizeof(tmp1)); // Template if (strlen(tmp1)) { // {"NAME":"12345678901234","GPIO":[255,255,255,255,255,255,255,255,255,255,255,255,255],"FLAG":255,"BASE":255,"CMND":"SO123 1;SO99 0"} snprintf_P(command, sizeof(command), PSTR("%s;%s" D_CMND_TEMPLATE " %s"), command, (Webserver->hasArg(F("t2"))) ? PSTR(D_CMND_MODULE " 0;") : "", tmp1); } ExecuteWebCommand(command); } /*-------------------------------------------------------------------------------------------*/ void HandleBackupConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_BACKUP_CONFIGURATION)); if (!SettingsBufferAlloc()) { return; } WiFiClient myClient = Webserver->client(); Webserver->setContentLength(sizeof(Settings)); char attachment[TOPSZ]; // char friendlyname[TOPSZ]; // snprintf_P(attachment, sizeof(attachment), PSTR("attachment; filename=Config_%s_%s.dmp"), NoAlNumToUnderscore(friendlyname, SettingsText(SET_FRIENDLYNAME1)), TasmotaGlobal.version); char hostname[sizeof(TasmotaGlobal.hostname)]; snprintf_P(attachment, sizeof(attachment), PSTR("attachment; filename=Config_%s_%s.dmp"), NoAlNumToUnderscore(hostname, TasmotaGlobal.hostname), TasmotaGlobal.version); Webserver->sendHeader(F("Content-Disposition"), attachment); WSSend(200, CT_APP_STREAM, ""); uint32_t cfg_crc32 = Settings.cfg_crc32; Settings.cfg_crc32 = GetSettingsCrc32(); // Calculate crc (again) as it might be wrong when savedata = 0 (#3918) memcpy(settings_buffer, &Settings, sizeof(Settings)); if (Web.config_xor_on_set) { for (uint32_t i = 2; i < sizeof(Settings); i++) { settings_buffer[i] ^= (Web.config_xor_on_set +i); } } myClient.write((const char*)settings_buffer, sizeof(Settings)); SettingsBufferFree(); Settings.cfg_crc32 = cfg_crc32; // Restore crc in case savedata = 0 to make sure settings will be noted as changed } /*-------------------------------------------------------------------------------------------*/ void HandleResetConfiguration(void) { if (!HttpCheckPriviledgedAccess(!WifiIsInManagerMode())) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_RESET_CONFIGURATION)); WSContentStart_P(PSTR(D_RESET_CONFIGURATION), !WifiIsInManagerMode()); WSContentSendStyle(); WSContentSend_P(PSTR("
" D_CONFIGURATION_RESET "
")); WSContentSend_P(HTTP_MSG_RSTRT); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); char command[CMDSZ]; snprintf_P(command, sizeof(command), PSTR(D_CMND_RESET " 1")); ExecuteWebCommand(command); } void HandleRestoreConfiguration(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_RESTORE_CONFIGURATION)); WSContentStart_P(PSTR(D_RESTORE_CONFIGURATION)); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_RST); WSContentSend_P(HTTP_FORM_RST_UPG, PSTR(D_RESTORE)); if (WifiIsInManagerMode()) { WSContentSpaceButton(BUTTON_MAIN); } else { WSContentSpaceButton(BUTTON_CONFIGURATION); } WSContentStop(); Web.upload_file_type = UPL_SETTINGS; } /*-------------------------------------------------------------------------------------------*/ void HandleInformation(void) { if (!HttpCheckPriviledgedAccess()) { return; } float freemem = ((float)ESP_getFreeHeap()) / 1024; AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_INFORMATION)); char stopic[TOPSZ]; WSContentStart_P(PSTR(D_INFORMATION)); // Save 1k of code space replacing table html with javascript replace codes // }1 = // }2 = WSContentSend_P(HTTP_SCRIPT_INFO_BEGIN); WSContentSend_P(PSTR("
")); WSContentSend_P(PSTR(D_PROGRAM_VERSION "}2%s%s"), TasmotaGlobal.version, TasmotaGlobal.image_name); WSContentSend_P(PSTR("}1" D_BUILD_DATE_AND_TIME "}2%s"), GetBuildDateAndTime().c_str()); WSContentSend_P(PSTR("}1" D_CORE_AND_SDK_VERSION "}2" ARDUINO_CORE_RELEASE "/%s"), ESP.getSdkVersion()); WSContentSend_P(PSTR("}1" D_UPTIME "}2%s"), GetUptime().c_str()); #ifdef ESP8266 WSContentSend_P(PSTR("}1" D_FLASH_WRITE_COUNT "}2%d at 0x%X"), Settings.save_flag, GetSettingsAddress()); #endif // ESP8266 #ifdef ESP32 WSContentSend_P(PSTR("}1" D_FLASH_WRITE_COUNT "}2%d"), Settings.save_flag); #endif // ESP32 WSContentSend_P(PSTR("}1" D_BOOT_COUNT "}2%d"), Settings.bootcount); WSContentSend_P(PSTR("}1" D_RESTART_REASON "}2%s"), GetResetReason().c_str()); uint32_t maxfn = (TasmotaGlobal.devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : TasmotaGlobal.devices_present; #ifdef USE_SONOFF_IFAN if (IsModuleIfan()) { maxfn = 1; } #endif // USE_SONOFF_IFAN for (uint32_t i = 0; i < maxfn; i++) { WSContentSend_P(PSTR("}1" D_FRIENDLY_NAME " %d}2%s"), i +1, SettingsText(SET_FRIENDLYNAME1 +i)); } WSContentSend_P(PSTR("}1}2 ")); // Empty line #ifdef ESP32 #ifdef USE_ETHERNET if (static_cast(EthernetLocalIP()) != 0) { WSContentSend_P(PSTR("}1" D_HOSTNAME "}2%s%s"), EthernetHostname(), (Mdns.begun) ? PSTR(".local") : ""); WSContentSend_P(PSTR("}1" D_MAC_ADDRESS "}2%s"), EthernetMacAddress().c_str()); WSContentSend_P(PSTR("}1" D_IP_ADDRESS " (eth)}2%_I"), (uint32_t)EthernetLocalIP()); WSContentSend_P(PSTR("}1
}2
")); } #endif #endif if (Settings.flag4.network_wifi) { int32_t rssi = WiFi.RSSI(); WSContentSend_P(PSTR("}1" D_AP "%d " D_SSID " (" D_RSSI ")}2%s (%d%%, %d dBm)"), Settings.sta_active +1, HtmlEscape(SettingsText(SET_STASSID1 + Settings.sta_active)).c_str(), WifiGetRssiAsQuality(rssi), rssi); WSContentSend_P(PSTR("}1" D_HOSTNAME "}2%s%s"), TasmotaGlobal.hostname, (Mdns.begun) ? PSTR(".local") : ""); #if LWIP_IPV6 String ipv6_addr = WifiGetIPv6(); if (ipv6_addr != "") { WSContentSend_P(PSTR("}1 IPv6 Address }2%s"), ipv6_addr.c_str()); } #endif if (static_cast(WiFi.localIP()) != 0) { WSContentSend_P(PSTR("}1" D_MAC_ADDRESS "}2%s"), WiFi.macAddress().c_str()); WSContentSend_P(PSTR("}1" D_IP_ADDRESS " (wifi)}2%_I"), (uint32_t)WiFi.localIP()); WSContentSend_P(PSTR("}1
}2
")); } } if (!TasmotaGlobal.global_state.network_down) { WSContentSend_P(PSTR("}1" D_GATEWAY "}2%_I"), Settings.ipv4_address[1]); WSContentSend_P(PSTR("}1" D_SUBNET_MASK "}2%_I"), Settings.ipv4_address[2]); WSContentSend_P(PSTR("}1" D_DNS_SERVER "}2%_I"), Settings.ipv4_address[3]); } if ((WiFi.getMode() >= WIFI_AP) && (static_cast(WiFi.softAPIP()) != 0)) { WSContentSend_P(PSTR("}1
}2
")); WSContentSend_P(PSTR("}1" D_MAC_ADDRESS "}2%s"), WiFi.softAPmacAddress().c_str()); WSContentSend_P(PSTR("}1" D_IP_ADDRESS " (AP)}2%_I"), (uint32_t)WiFi.softAPIP()); WSContentSend_P(PSTR("}1" D_GATEWAY "}2%_I"), (uint32_t)WiFi.softAPIP()); } WSContentSend_P(PSTR("}1}2 ")); // Empty line if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT WSContentSend_P(PSTR("}1" D_MQTT_HOST "}2%s"), SettingsText(SET_MQTT_HOST)); WSContentSend_P(PSTR("}1" D_MQTT_PORT "}2%d"), Settings.mqtt_port); #ifdef USE_MQTT_TLS WSContentSend_P(PSTR("}1" D_MQTT_TLS_ENABLE "}2%s"), Settings.flag4.mqtt_tls ? PSTR(D_ENABLED) : PSTR(D_DISABLED)); #endif // USE_MQTT_TLS WSContentSend_P(PSTR("}1" D_MQTT_USER "}2%s"), SettingsText(SET_MQTT_USER)); WSContentSend_P(PSTR("}1" D_MQTT_CLIENT "}2%s"), TasmotaGlobal.mqtt_client); WSContentSend_P(PSTR("}1" D_MQTT_TOPIC "}2%s"), SettingsText(SET_MQTT_TOPIC)); uint32_t real_index = SET_MQTT_GRP_TOPIC; for (uint32_t i = 0; i < MAX_GROUP_TOPICS; i++) { if (1 == i) { real_index = SET_MQTT_GRP_TOPIC2 -1; } if (strlen(SettingsText(real_index +i))) { WSContentSend_P(PSTR("}1" D_MQTT_GROUP_TOPIC " %d}2%s"), 1 +i, GetGroupTopic_P(stopic, "", real_index +i)); } } WSContentSend_P(PSTR("}1" D_MQTT_FULL_TOPIC "}2%s"), GetTopic_P(stopic, CMND, TasmotaGlobal.mqtt_topic, "")); WSContentSend_P(PSTR("}1" D_MQTT " " D_FALLBACK_TOPIC "}2%s"), GetFallbackTopic_P(stopic, "")); WSContentSend_P(PSTR("}1" D_MQTT_NO_RETAIN "}2%s"), Settings.flag4.mqtt_no_retain ? PSTR(D_ENABLED) : PSTR(D_DISABLED)); } else { WSContentSend_P(PSTR("}1" D_MQTT "}2" D_DISABLED)); } #if defined(USE_EMULATION) || defined(USE_DISCOVERY) WSContentSend_P(PSTR("}1}2 ")); // Empty line #endif // USE_EMULATION or USE_DISCOVERY #ifdef USE_EMULATION WSContentSend_P(PSTR("}1" D_EMULATION "}2%s"), GetTextIndexed(stopic, sizeof(stopic), Settings.flag2.emulation, kEmulationOptions)); #endif // USE_EMULATION #ifdef USE_DISCOVERY WSContentSend_P(PSTR("}1" D_MDNS_DISCOVERY "}2%s"), (Settings.flag3.mdns_enabled) ? D_ENABLED : D_DISABLED); // SetOption55 - Control mDNS service if (Settings.flag3.mdns_enabled) { // SetOption55 - Control mDNS service #ifdef WEBSERVER_ADVERTISE WSContentSend_P(PSTR("}1" D_MDNS_ADVERTISE "}2" D_WEB_SERVER)); #else WSContentSend_P(PSTR("}1" D_MDNS_ADVERTISE "}2" D_DISABLED)); #endif // WEBSERVER_ADVERTISE } #endif // USE_DISCOVERY WSContentSend_P(PSTR("}1}2 ")); // Empty line WSContentSend_P(PSTR("}1" D_ESP_CHIP_ID "}2%d (%s)"), ESP_getChipId(), GetDeviceHardware().c_str()); #ifdef ESP8266 WSContentSend_P(PSTR("}1" D_FLASH_CHIP_ID "}20x%06X"), ESP.getFlashChipId()); #endif WSContentSend_P(PSTR("}1" D_FLASH_CHIP_SIZE "}2%d kB"), ESP.getFlashChipRealSize() / 1024); WSContentSend_P(PSTR("}1" D_PROGRAM_FLASH_SIZE "}2%d kB"), ESP.getFlashChipSize() / 1024); WSContentSend_P(PSTR("}1" D_PROGRAM_SIZE "}2%d kB"), ESP_getSketchSize() / 1024); WSContentSend_P(PSTR("}1" D_FREE_PROGRAM_SPACE "}2%d kB"), ESP.getFreeSketchSpace() / 1024); #ifdef ESP32 int32_t freeMaxMem = 100 - (int32_t)(ESP_getMaxAllocHeap() * 100 / ESP_getFreeHeap()); WSContentSend_PD(PSTR("}1" D_FREE_MEMORY "}2%1_f kB (" D_FRAGMENTATION " %d%%)"), &freemem, freeMaxMem); if (psramFound()) { WSContentSend_P(PSTR("}1" D_PSR_MAX_MEMORY "}2%d kB"), ESP.getPsramSize() / 1024); WSContentSend_P(PSTR("}1" D_PSR_FREE_MEMORY "}2%d kB"), ESP.getFreePsram() / 1024); } #else // ESP32 WSContentSend_PD(PSTR("}1" D_FREE_MEMORY "}2%1_f kB"), &freemem); #endif // ESP32 WSContentSend_P(PSTR("
")); WSContentSend_P(HTTP_SCRIPT_INFO_END); WSContentSendStyle(); // WSContentSend_P(PSTR("
 Information ")); WSContentSend_P(PSTR("" "
")); // WSContentSend_P(PSTR("
")); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); } #endif // Not FIRMWARE_MINIMAL /*-------------------------------------------------------------------------------------------*/ #if defined(USE_ZIGBEE_EZSP) || defined(USE_TASMOTA_CLIENT) || defined(SHELLY_FW_UPGRADE) || defined(USE_RF_FLASH) || defined(USE_CCLOADER) #define USE_WEB_FW_UPGRADE #endif #ifdef USE_WEB_FW_UPGRADE struct { size_t spi_hex_size; size_t spi_sector_counter; size_t spi_sector_cursor; bool active; bool ready; } BUpload; void BUploadInit(uint32_t file_type) { Web.upload_file_type = file_type; BUpload.spi_hex_size = 0; BUpload.spi_sector_counter = FlashWriteStartSector(); BUpload.spi_sector_cursor = 0; BUpload.active = true; BUpload.ready = false; } uint32_t BUploadWriteBuffer(uint8_t *buf, size_t size) { if (0 == BUpload.spi_sector_cursor) { // Starting a new sector write so we need to erase it first if (!ESP.flashEraseSector(BUpload.spi_sector_counter)) { return 7; // Upload aborted - flash failed } } BUpload.spi_sector_cursor++; if (!ESP.flashWrite((BUpload.spi_sector_counter * SPI_FLASH_SEC_SIZE) + ((BUpload.spi_sector_cursor -1) * HTTP_UPLOAD_BUFLEN), (uint32_t*)buf, size)) { return 7; // Upload aborted - flash failed } BUpload.spi_hex_size += size; if (2 == BUpload.spi_sector_cursor) { // The web upload sends 2048 bytes at a time so keep track of the cursor position to reset it for the next flash sector erase BUpload.spi_sector_cursor = 0; BUpload.spi_sector_counter++; if (BUpload.spi_sector_counter > FlashWriteMaxSector()) { return 9; // File too large - Not enough free space } } return 0; } #endif // USE_WEB_FW_UPGRADE void HandleUpgradeFirmware(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_FIRMWARE_UPGRADE)); WSContentStart_P(PSTR(D_FIRMWARE_UPGRADE)); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_UPG, SettingsText(SET_OTAURL)); WSContentSend_P(HTTP_FORM_RST_UPG, PSTR(D_UPGRADE)); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); Web.upload_file_type = UPL_TASMOTA; } void HandleUpgradeFirmwareStart(void) { if (!HttpCheckPriviledgedAccess()) { return; } char command[TOPSZ + 10]; // OtaUrl AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_UPGRADE_STARTED)); WifiConfigCounter(); char otaurl[TOPSZ]; WebGetArg(PSTR("o"), otaurl, sizeof(otaurl)); if (strlen(otaurl)) { snprintf_P(command, sizeof(command), PSTR(D_CMND_OTAURL " %s"), otaurl); ExecuteWebCommand(command); } WSContentStart_P(PSTR(D_INFORMATION)); WSContentSend_P(HTTP_SCRIPT_RELOAD_TIME, HTTP_OTA_RESTART_RECONNECT_TIME); WSContentSendStyle(); WSContentSend_P(PSTR("
" D_UPGRADE_STARTED " ...
")); WSContentSend_P(HTTP_MSG_RSTRT); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); snprintf_P(command, sizeof(command), PSTR(D_CMND_UPGRADE " 1")); ExecuteWebCommand(command); } void HandleUploadDone(void) { if (!HttpCheckPriviledgedAccess()) { return; } #if defined(USE_ZIGBEE_EZSP) if ((UPL_EFR32 == Web.upload_file_type) && !Web.upload_error && BUpload.ready) { BUpload.ready = false; // Make sure not to follow thru again // GUI xmodem ZigbeeUploadStep1Done(FlashWriteStartSector(), BUpload.spi_hex_size); HandleZigbeeXfer(); return; } #endif // USE_ZIGBEE_EZSP AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_UPLOAD_DONE)); WifiConfigCounter(); UploadServices(1); WSContentStart_P(PSTR(D_INFORMATION)); if (!Web.upload_error) { WSContentSend_P(HTTP_SCRIPT_RELOAD_TIME, (UPL_TASMOTA == Web.upload_file_type) ? HTTP_OTA_RESTART_RECONNECT_TIME : HTTP_RESTART_RECONNECT_TIME); // Refesh main web ui after OTA upgrade } WSContentSendStyle(); WSContentSend_P(PSTR("
" D_UPLOAD " " D_FAILED "

"), WebColor(COL_TEXT_WARNING)); char error[100]; if (Web.upload_error < 10) { GetTextIndexed(error, sizeof(error), Web.upload_error -1, kUploadErrors); } else { snprintf_P(error, sizeof(error), PSTR(D_UPLOAD_ERROR_CODE " %d"), Web.upload_error); } WSContentSend_P(error); DEBUG_CORE_LOG(PSTR("UPL: %s"), error); TasmotaGlobal.stop_flash_rotate = Settings.flag.stop_flash_rotate; // SetOption12 - Switch between dynamic or fixed slot flash save location Web.upload_error = 0; } else { WSContentSend_P(PSTR("%06x'>" D_SUCCESSFUL "
"), WebColor(COL_TEXT_SUCCESS)); TasmotaGlobal.restart_flag = 2; // Always restart to re-enable disabled features during update WSContentSend_P(HTTP_MSG_RSTRT); ShowWebSource(SRC_WEBGUI); } SettingsBufferFree(); WSContentSend_P(PSTR("

")); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); } #ifdef USE_BLE_ESP32 // declare the fn int ExtStopBLE(); #endif void UploadServices(uint32_t start_service) { if (Web.upload_services_stopped != start_service) { return; } Web.upload_services_stopped = !start_service; if (start_service) { // AddLog(LOG_LEVEL_DEBUG, PSTR("UPL: Services enabled")); /* MqttRetryCounter(0); */ #ifdef USE_ARILUX_RF AriluxRfInit(); #endif // USE_ARILUX_RF #ifdef USE_COUNTER CounterInterruptDisable(false); #endif // USE_COUNTER #ifdef USE_EMULATION UdpConnect(); #endif // USE_EMULATION } else { // AddLog(LOG_LEVEL_DEBUG, PSTR("UPL: Services disabled")); #ifdef USE_BLE_ESP32 ExtStopBLE(); #endif #ifdef USE_EMULATION UdpDisconnect(); #endif // USE_EMULATION #ifdef USE_COUNTER CounterInterruptDisable(true); // Prevent OTA failures on 100Hz counter interrupts #endif // USE_COUNTER #ifdef USE_ARILUX_RF AriluxRfDisable(); // Prevent restart exception on Arilux Interrupt routine #endif // USE_ARILUX_RF /* MqttRetryCounter(60); if (Settings.flag.mqtt_enabled) { // SetOption3 - Enable MQTT MqttDisconnect(); } */ } } void HandleUploadLoop(void) { // Based on ESP8266HTTPUpdateServer.cpp uses ESP8266WebServer Parsing.cpp and Cores Updater.cpp (Update) static uint32_t upload_size; static bool upload_error_signalled; if (HTTP_USER == Web.state) { return; } if (Web.upload_error) { if (!upload_error_signalled) { if (UPL_TASMOTA == Web.upload_file_type) { Update.end(); } UploadServices(1); // AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_UPLOAD "Upload error %d"), Web.upload_error); upload_error_signalled = true; } return; } HTTPUpload& upload = Webserver->upload(); // ***** Step1: Start upload file if (UPLOAD_FILE_START == upload.status) { Web.upload_error = 0; upload_error_signalled = false; upload_size = 0; UploadServices(0); if (0 == upload.filename.c_str()[0]) { Web.upload_error = 1; // No file selected return; } SettingsSave(1); // Free flash for upload AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_UPLOAD D_FILE " %s"), upload.filename.c_str()); if (UPL_SETTINGS == Web.upload_file_type) { if (!SettingsBufferAlloc()) { Web.upload_error = 2; // Not enough space return; } } #ifdef USE_UFILESYS else if (UPL_UFSFILE == Web.upload_file_type) { if (!UfsUploadFileOpen(upload.filename.c_str())) { Web.upload_error = 2; return; } } #endif // USE_UFILESYS } // ***** Step2: Write upload file else if (UPLOAD_FILE_WRITE == upload.status) { if (0 == upload.totalSize) { // First block received if (UPL_SETTINGS == Web.upload_file_type) { Web.config_block_count = 0; } #ifdef USE_WEB_FW_UPGRADE #ifdef USE_RF_FLASH else if ((SONOFF_BRIDGE == TasmotaGlobal.module_type) && (':' == upload.buf[0])) { // Check if this is a RF bridge FW file BUploadInit(UPL_EFM8BB1); } #endif // USE_RF_FLASH #ifdef USE_TASMOTA_CLIENT else if (TasmotaClient_Available() && (':' == upload.buf[0])) { // Check if this is a ARDUINO CLIENT hex file BUploadInit(UPL_TASMOTACLIENT); } #endif // USE_TASMOTA_CLIENT #ifdef SHELLY_FW_UPGRADE else if (ShdPresent() && (0x00 == upload.buf[0]) && ((0x10 == upload.buf[1]) || (0x20 == upload.buf[1]))) { BUploadInit(UPL_SHD); } #endif // SHELLY_FW_UPGRADE #ifdef USE_CCLOADER else if (CCLChipFound() && 0x02 == upload.buf[0]) { // the 0x02 is only an assumption!! BUploadInit(UPL_CCL); } #endif // USE_CCLOADER #ifdef USE_ZIGBEE_EZSP #ifdef ESP8266 else if ((SONOFF_ZB_BRIDGE == TasmotaGlobal.module_type) && (0xEB == upload.buf[0])) { // Check if this is a Zigbee bridge FW file #endif // ESP8266 #ifdef ESP32 else if (PinUsed(GPIO_ZIGBEE_RX) && PinUsed(GPIO_ZIGBEE_TX) && (0xEB == upload.buf[0])) { // Check if this is a Zigbee bridge FW file #endif // ESP32 // Read complete file into ESP8266 flash // Current files are about 200k Web.upload_error = ZigbeeUploadStep1Init(); // 1 if (Web.upload_error != 0) { return; } BUploadInit(UPL_EFR32); } #endif // USE_ZIGBEE_EZSP #endif // USE_WEB_FW_UPGRADE else if (UPL_TASMOTA == Web.upload_file_type) { if ((upload.buf[0] != 0xE9) && (upload.buf[0] != 0x1F)) { // 0x1F is gzipped 0xE9 Web.upload_error = 3; // Invalid file signature - Magic byte is not 0xE9 return; } if (0xE9 == upload.buf[0]) { uint32_t bin_flash_size = ESP.magicFlashChipSize((upload.buf[3] & 0xf0) >> 4); if (bin_flash_size > ESP.getFlashChipRealSize()) { Web.upload_error = 4; // Program flash size is larger than real flash size return; } // upload.buf[2] = 3; // Force DOUT - ESP8285 } uint32_t maxSketchSpace = (ESP.getFreeSketchSpace() - 0x1000) & 0xFFFFF000; if (!Update.begin(maxSketchSpace)) { //start with max available size Web.upload_error = 2; // Not enough space return; } } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_UPLOAD "File type %d"), Web.upload_file_type); } // First block received if (UPL_SETTINGS == Web.upload_file_type) { if (upload.currentSize > (sizeof(Settings) - (Web.config_block_count * HTTP_UPLOAD_BUFLEN))) { Web.upload_error = 9; // File too large return; } memcpy(settings_buffer + (Web.config_block_count * HTTP_UPLOAD_BUFLEN), upload.buf, upload.currentSize); Web.config_block_count++; } #ifdef USE_UFILESYS else if (UPL_UFSFILE == Web.upload_file_type) { if (!UfsUploadFileWrite(upload.buf, upload.currentSize)) { Web.upload_error = 9; // File too large return; } } #endif // USE_UFILESYS #ifdef USE_WEB_FW_UPGRADE else if (BUpload.active) { // Write a block // AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: Size %d"), upload.currentSize); // AddLogBuffer(LOG_LEVEL_DEBUG, upload.buf, 32); Web.upload_error = BUploadWriteBuffer(upload.buf, upload.currentSize); if (Web.upload_error != 0) { return; } } #endif // USE_WEB_FW_UPGRADE else if (Update.write(upload.buf, upload.currentSize) != upload.currentSize) { Web.upload_error = 5; // Upload buffer miscompare return; } if (upload.totalSize && !(upload.totalSize % 102400)) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_UPLOAD "Progress %d kB"), upload.totalSize / 1024); } } // ***** Step3: Finish upload file else if (UPLOAD_FILE_END == upload.status) { UploadServices(1); if (UPL_SETTINGS == Web.upload_file_type) { if (Web.config_xor_on_set) { for (uint32_t i = 2; i < sizeof(Settings); i++) { settings_buffer[i] ^= (Web.config_xor_on_set +i); } } bool valid_settings = false; unsigned long buffer_version = settings_buffer[11] << 24 | settings_buffer[10] << 16 | settings_buffer[9] << 8 | settings_buffer[8]; if (buffer_version > 0x06000000) { uint32_t buffer_size = settings_buffer[3] << 8 | settings_buffer[2]; if (buffer_version > 0x0606000A) { uint32_t buffer_crc32 = settings_buffer[4095] << 24 | settings_buffer[4094] << 16 | settings_buffer[4093] << 8 | settings_buffer[4092]; valid_settings = (GetCfgCrc32(settings_buffer, buffer_size -4) == buffer_crc32); } else { uint16_t buffer_crc16 = settings_buffer[15] << 8 | settings_buffer[14]; valid_settings = (GetCfgCrc16(settings_buffer, buffer_size) == buffer_crc16); } } else { valid_settings = (settings_buffer[0] == CONFIG_FILE_SIGN); } if (valid_settings) { #ifdef ESP8266 valid_settings = (0 == settings_buffer[0xF36]); // Settings.config_version #endif // ESP8266 #ifdef ESP32 valid_settings = (1 == settings_buffer[0xF36]); // Settings.config_version #endif // ESP32 } if (valid_settings) { SettingsDefaultSet2(); memcpy((char*)&Settings +16, settings_buffer +16, sizeof(Settings) -16); Settings.version = buffer_version; // Restore version and auto upgrade after restart SettingsBufferFree(); } else { Web.upload_error = 8; // File invalid return; } } #ifdef USE_UFILESYS else if (UPL_UFSFILE == Web.upload_file_type) { UfsUploadFileClose(); } #endif // USE_UFILESYS #ifdef USE_WEB_FW_UPGRADE else if (BUpload.active) { // Done writing the data to SPI flash BUpload.active = false; AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_UPLOAD "Transfer %u bytes"), upload.totalSize); uint8_t* data = FlashDirectAccess(); // uint32_t* values = (uint32_t*)(data); // Only 4-byte access allowed // AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_UPLOAD "Head 0x%08X"), values[0]); uint32_t error = 0; #ifdef USE_RF_FLASH if (UPL_EFM8BB1 == Web.upload_file_type) { error = SnfBrUpdateFirmware(data, BUpload.spi_hex_size); } #endif // USE_RF_FLASH #ifdef USE_TASMOTA_CLIENT if (UPL_TASMOTACLIENT == Web.upload_file_type) { error = TasmotaClient_Flash(data, BUpload.spi_hex_size); } #endif // USE_TASMOTA_CLIENT #ifdef SHELLY_FW_UPGRADE if (UPL_SHD == Web.upload_file_type) { error = ShdFlash(data, BUpload.spi_hex_size); } #endif // SHELLY_FW_UPGRADE #ifdef USE_CCLOADER if (UPL_CCL == Web.upload_file_type) { error = CLLFlashFirmware(data, BUpload.spi_hex_size); } #endif // SHELLY_FW_UPGRADE #ifdef USE_ZIGBEE_EZSP if (UPL_EFR32 == Web.upload_file_type) { BUpload.ready = true; // So we know on upload success page if it needs to flash hex or do a normal restart } #endif // USE_ZIGBEE_EZSP if (error != 0) { // AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_UPLOAD "Transfer error %d"), error); Web.upload_error = error + (100 * Web.upload_file_type); // Add offset to discriminate transfer errors return; } } #endif // USE_WEB_FW_UPGRADE else if (!Update.end(true)) { // true to set the size to the current progress Web.upload_error = 6; // Upload failed. Enable logging 3 return; } AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_UPLOAD D_SUCCESSFUL " %u bytes"), upload.totalSize); } // ***** Step4: Abort upload file else { UploadServices(1); Web.upload_error = 7; // Upload aborted if (UPL_TASMOTA == Web.upload_file_type) { Update.end(); } } // do actually wait a little to allow ESP32 tasks to tick // fixes task timeout in ESP32Solo1 style unicore code. delay(10); OsWatchLoop(); // Scheduler(); // Feed OsWatch timer to prevent restart on long uploads } /*-------------------------------------------------------------------------------------------*/ void HandlePreflightRequest(void) { HttpHeaderCors(); Webserver->sendHeader(F("Access-Control-Allow-Methods"), F("GET, POST")); Webserver->sendHeader(F("Access-Control-Allow-Headers"), F("authorization")); WSSend(200, CT_HTML, ""); } /*-------------------------------------------------------------------------------------------*/ void HandleHttpCommand(void) { if (!HttpCheckPriviledgedAccess(false)) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_COMMAND)); if (!WebAuthenticate()) { // Prefer authorization via HTTP header (Basic auth), if it fails, use legacy method via GET parameters char tmp1[33]; WebGetArg(PSTR("user"), tmp1, sizeof(tmp1)); char tmp2[strlen(SettingsText(SET_WEBPWD)) + 2]; // Need space for an entered password longer than set password WebGetArg(PSTR("password"), tmp2, sizeof(tmp2)); if (!(!strcmp(tmp1, WEB_USERNAME) && !strcmp(tmp2, SettingsText(SET_WEBPWD)))) { WSContentBegin(401, CT_APP_JSON); WSContentSend_P(PSTR("{\"" D_RSLT_WARNING "\":\"" D_NEED_USER_AND_PASSWORD "\"}")); WSContentEnd(); return; } } WSContentBegin(200, CT_APP_JSON); String svalue = Webserver->arg(F("cmnd")); if (svalue.length() && (svalue.length() < MQTT_MAX_PACKET_SIZE)) { uint32_t curridx = TasmotaGlobal.log_buffer_pointer; TasmotaGlobal.templog_level = LOG_LEVEL_INFO; ExecuteWebCommand((char*)svalue.c_str(), SRC_WEBCOMMAND); WSContentSend_P(PSTR("{")); bool cflg = false; uint32_t index = curridx; char* line; size_t len; while (GetLog(TasmotaGlobal.templog_level, &index, &line, &len)) { // [14:49:36.123 MQTT: stat/wemos5/RESULT = {"POWER":"OFF"}] > [{"POWER":"OFF"}] char* JSON = (char*)memchr(line, '{', len); if (JSON) { // Is it a JSON message (and not only [15:26:08 MQT: stat/wemos5/POWER = O]) size_t JSONlen = len - (JSON - line); if (JSONlen > sizeof(TasmotaGlobal.mqtt_data)) { JSONlen = sizeof(TasmotaGlobal.mqtt_data); } char stemp[JSONlen]; strlcpy(stemp, JSON +1, JSONlen -2); WSContentSend_P(PSTR("%s%s"), (cflg) ? "," : "", stemp); cflg = true; } } WSContentSend_P(PSTR("}")); TasmotaGlobal.templog_level = 0; } else { WSContentSend_P(PSTR("{\"" D_RSLT_WARNING "\":\"" D_ENTER_COMMAND " cmnd=\"}")); } WSContentEnd(); } /*-------------------------------------------------------------------------------------------*/ void HandleManagement(void) { if (!HttpCheckPriviledgedAccess()) { return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_MANAGEMENT)); WSContentStart_P(PSTR(D_MANAGEMENT)); WSContentSendStyle(); WSContentButton(BUTTON_CONSOLE); XdrvMailbox.index = 0; XdrvCall(FUNC_WEB_ADD_CONSOLE_BUTTON); XsnsCall(FUNC_WEB_ADD_CONSOLE_BUTTON); WSContentSend_P(PSTR("
")); // 5px padding XdrvCall(FUNC_WEB_ADD_MANAGEMENT_BUTTON); WSContentSpaceButton(BUTTON_MAIN); WSContentStop(); } void HandleConsole(void) { if (!HttpCheckPriviledgedAccess()) { return; } if (Webserver->hasArg(F("c2"))) { // Console refresh requested HandleConsoleRefresh(); return; } AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONSOLE)); WSContentStart_P(PSTR(D_CONSOLE)); WSContentSend_P(HTTP_SCRIPT_CONSOL, Settings.web_refresh); WSContentSendStyle(); WSContentSend_P(HTTP_FORM_CMND); WSContentSpaceButton((WebUseManagementSubmenu()) ? BUTTON_MANAGEMENT : BUTTON_MAIN); WSContentStop(); } void HandleConsoleRefresh(void) { String svalue = Webserver->arg(F("c1")); if (svalue.length() && (svalue.length() < MQTT_MAX_PACKET_SIZE)) { AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_COMMAND "%s"), svalue.c_str()); ExecuteWebCommand((char*)svalue.c_str(), SRC_WEBCONSOLE); } char stmp[8]; WebGetArg(PSTR("c2"), stmp, sizeof(stmp)); uint32_t index = 0; // Initial start, dump all if (strlen(stmp)) { index = atoi(stmp); } WSContentBegin(200, CT_PLAIN); WSContentSend_P(PSTR("%d}1%d}1"), TasmotaGlobal.log_buffer_pointer, Web.reset_web_log_flag); if (!Web.reset_web_log_flag) { index = 0; Web.reset_web_log_flag = true; } bool cflg = (index); char* line; size_t len; while (GetLog(Settings.weblog_level, &index, &line, &len)) { if (len > sizeof(TasmotaGlobal.mqtt_data) -2) { len = sizeof(TasmotaGlobal.mqtt_data); } char stemp[len +1]; strlcpy(stemp, line, len); WSContentSend_P(PSTR("%s%s"), (cflg) ? PSTR("\n") : "", stemp); cflg = true; } WSContentSend_P(PSTR("}1")); WSContentEnd(); } /********************************************************************************************/ void HandleNotFound(void) { // AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP "Not found (%s)"), Webserver->uri().c_str()); if (CaptivePortal()) { return; } // If captive portal redirect instead of displaying the error page. #ifdef USE_EMULATION #ifdef USE_EMULATION_HUE String path = Webserver->uri(); if ((EMUL_HUE == Settings.flag2.emulation) && (path.startsWith(F("/api")))) { HandleHueApi(&path); } else #endif // USE_EMULATION_HUE #endif // USE_EMULATION { WSContentBegin(404, CT_PLAIN); WSContentSend_P(PSTR(D_FILE_NOT_FOUND "\n\nURI: %s\nMethod: %s\nArguments: %d\n"), Webserver->uri().c_str(), (Webserver->method() == HTTP_GET) ? PSTR("GET") : PSTR("POST"), Webserver->args()); for (uint32_t i = 0; i < Webserver->args(); i++) { WSContentSend_P(PSTR(" %s: %s\n"), Webserver->argName(i).c_str(), Webserver->arg(i).c_str()); } WSContentEnd(); } } /* Redirect to captive portal if we got a request for another domain. Return true in that case so the page handler do not try to handle the request again. */ bool CaptivePortal(void) { // Possible hostHeader: connectivitycheck.gstatic.com or 192.168.4.1 if ((WifiIsInManagerMode()) && !ValidIpAddress(Webserver->hostHeader().c_str())) { AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_REDIRECTED)); Webserver->sendHeader(F("Location"), String(F("http://")) + Webserver->client().localIP().toString(), true); WSSend(302, CT_PLAIN, ""); // Empty content inhibits Content-length header so we have to close the socket ourselves. Webserver->client().stop(); // Stop is needed because we sent no content length return true; } return false; } /*********************************************************************************************/ int WebSend(char *buffer) { // [tasmota] POWER1 ON --> Sends http://tasmota/cm?cmnd=POWER1 ON // [192.168.178.86:80,admin:joker] POWER1 ON --> Sends http://hostname:80/cm?user=admin&password=joker&cmnd=POWER1 ON // [tasmota] /any/link/starting/with/a/slash.php?log=123 --> Sends http://tasmota/any/link/starting/with/a/slash.php?log=123 // [tasmota,admin:joker] /any/link/starting/with/a/slash.php?log=123 --> Sends http://tasmota/any/link/starting/with/a/slash.php?log=123 char *host; char *user; char *password; char *command; int status = 1; // Wrong parameters // buffer = | [ 192.168.178.86 : 80 , admin : joker ] POWER1 ON | host = strtok_r(buffer, "]", &command); // host = | [ 192.168.178.86 : 80 , admin : joker |, command = | POWER1 ON | if (host && command) { RemoveSpace(host); // host = |[192.168.178.86:80,admin:joker| host++; // host = |192.168.178.86:80,admin:joker| - Skip [ host = strtok_r(host, ",", &user); // host = |192.168.178.86:80|, user = |admin:joker| String url = F("http://"); // url = |http://| url += host; // url = |http://192.168.178.86:80| command = Trim(command); // command = |POWER1 ON| or |/any/link/starting/with/a/slash.php?log=123| if (command[0] != '/') { url += F("/cm?"); // url = |http://192.168.178.86/cm?| if (user) { user = strtok_r(user, ":", &password); // user = |admin|, password = |joker| if (user && password) { char userpass[200]; snprintf_P(userpass, sizeof(userpass), PSTR("user=%s&password=%s&"), user, password); url += userpass; // url = |http://192.168.178.86/cm?user=admin&password=joker&| } } url += F("cmnd="); // url = |http://192.168.178.86/cm?cmnd=| or |http://192.168.178.86/cm?user=admin&password=joker&cmnd=| } url += command; // url = |http://192.168.178.86/cm?cmnd=POWER1 ON| DEBUG_CORE_LOG(PSTR("WEB: Uri |%s|"), url.c_str()); WiFiClient http_client; HTTPClient http; if (http.begin(http_client, UrlEncode(url))) { // UrlEncode(url) = |http://192.168.178.86/cm?cmnd=POWER1%20ON| int http_code = http.GET(); // Start connection and send HTTP header if (http_code > 0) { // http_code will be negative on error if (http_code == HTTP_CODE_OK || http_code == HTTP_CODE_MOVED_PERMANENTLY) { #ifdef USE_WEBSEND_RESPONSE // Return received data to the user - Adds 900+ bytes to the code const char* read = http.getString().c_str(); // File found at server - may need lot of ram or trigger out of memory! uint32_t j = 0; char text = '.'; while (text != '\0') { text = *read++; if (text > 31) { // Remove control characters like linefeed TasmotaGlobal.mqtt_data[j++] = text; if (j == sizeof(TasmotaGlobal.mqtt_data) -2) { break; } } } TasmotaGlobal.mqtt_data[j] = '\0'; #ifdef USE_SCRIPT extern uint8_t tasm_cmd_activ; // recursive call must be possible in this case tasm_cmd_activ = 0; #endif // USE_SCRIPT MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_STAT, PSTR(D_CMND_WEBSEND)); #endif // USE_WEBSEND_RESPONSE } status = 0; // No error - Done } else { status = 2; // Connection failed } http.end(); // Clean up connection data } else { status = 3; // Host not found or connection error } } return status; } bool JsonWebColor(const char* dataBuf) { // Default (Dark theme) // {"WebColor":["#eaeaea","#252525","#4f4f4f","#000","#ddd","#65c115","#1f1f1f","#ff5661","#008000","#faffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#faffff","#999","#eaeaea"]} // Default pre v7 (Light theme) // {"WebColor":["#000","#fff","#f2f2f2","#000","#fff","#000","#fff","#f00","#008000","#fff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#fff","#999","#000"]} // {"WebColor":["#000000","#ffffff","#f2f2f2","#000000","#ffffff","#000000","#ffffff","#ff0000","#008000","#ffffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#ffffff","#999999","#000000"]} JsonParser parser((char*) dataBuf); JsonParserObject root = parser.getRootObject(); JsonParserArray arr = root[PSTR(D_CMND_WEBCOLOR)].getArray(); if (arr) { // if arr is valid, i.e. json is valid, the key D_CMND_WEBCOLOR was found and the token is an arra uint32_t i = 0; for (auto color : arr) { if (i < COL_LAST) { WebHexCode(i, color.getStr()); } else { break; } i++; } } return true; } const char kWebSendStatus[] PROGMEM = D_JSON_DONE "|" D_JSON_WRONG_PARAMETERS "|" D_JSON_CONNECT_FAILED "|" D_JSON_HOST_NOT_FOUND "|" D_JSON_MEMORY_ERROR; const char kWebCommands[] PROGMEM = "|" // No prefix #ifdef USE_EMULATION D_CMND_EMULATION "|" #endif #if defined(USE_SENDMAIL) || defined(USE_ESP32MAIL) D_CMND_SENDMAIL "|" #endif D_CMND_WEBSERVER "|" D_CMND_WEBPASSWORD "|" D_CMND_WEBLOG "|" D_CMND_WEBREFRESH "|" D_CMND_WEBSEND "|" D_CMND_WEBCOLOR "|" D_CMND_WEBSENSOR "|" D_CMND_WEBBUTTON "|" D_CMND_CORS; void (* const WebCommand[])(void) PROGMEM = { #ifdef USE_EMULATION &CmndEmulation, #endif #if defined(USE_SENDMAIL) || defined(USE_ESP32MAIL) &CmndSendmail, #endif &CmndWebServer, &CmndWebPassword, &CmndWeblog, &CmndWebRefresh, &CmndWebSend, &CmndWebColor, &CmndWebSensor, &CmndWebButton, &CmndCors }; /*********************************************************************************************\ * Commands \*********************************************************************************************/ #ifdef USE_EMULATION void CmndEmulation(void) { #if defined(USE_EMULATION_WEMO) || defined(USE_EMULATION_HUE) #if defined(USE_EMULATION_WEMO) && defined(USE_EMULATION_HUE) if ((XdrvMailbox.payload >= EMUL_NONE) && (XdrvMailbox.payload < EMUL_MAX)) { #else #ifndef USE_EMULATION_WEMO if ((EMUL_NONE == XdrvMailbox.payload) || (EMUL_HUE == XdrvMailbox.payload)) { #endif #ifndef USE_EMULATION_HUE if ((EMUL_NONE == XdrvMailbox.payload) || (EMUL_WEMO == XdrvMailbox.payload)) { #endif #endif Settings.flag2.emulation = XdrvMailbox.payload; TasmotaGlobal.restart_flag = 2; } #endif ResponseCmndNumber(Settings.flag2.emulation); } #endif // USE_EMULATION #if defined(USE_SENDMAIL) || defined(USE_ESP32MAIL) void CmndSendmail(void) { if (XdrvMailbox.data_len > 0) { uint8_t result = SendMail(XdrvMailbox.data); char stemp1[20]; ResponseCmndChar(GetTextIndexed(stemp1, sizeof(stemp1), result, kWebSendStatus)); } } #endif // USE_SENDMAIL void CmndWebServer(void) { if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 2)) { Settings.webserver = XdrvMailbox.payload; } if (Settings.webserver) { Response_P(PSTR("{\"" D_CMND_WEBSERVER "\":\"" D_JSON_ACTIVE_FOR " %s " D_JSON_ON_DEVICE " %s " D_JSON_WITH_IP_ADDRESS " %_I\"}"), (2 == Settings.webserver) ? PSTR(D_ADMIN) : PSTR(D_USER), NetworkHostname(), (uint32_t)NetworkAddress()); } else { ResponseCmndStateText(0); } } void CmndWebPassword(void) { bool show_asterisk = (2 == XdrvMailbox.index); if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_WEBPWD, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? WEB_PASSWORD : XdrvMailbox.data); if (!show_asterisk) { ResponseCmndChar(SettingsText(SET_WEBPWD)); } } else { show_asterisk = true; } if (show_asterisk) { Response_P(S_JSON_COMMAND_ASTERISK, XdrvMailbox.command); } } void CmndWeblog(void) { if ((XdrvMailbox.payload >= LOG_LEVEL_NONE) && (XdrvMailbox.payload <= LOG_LEVEL_DEBUG_MORE)) { Settings.weblog_level = XdrvMailbox.payload; } ResponseCmndNumber(Settings.weblog_level); } void CmndWebRefresh(void) { if ((XdrvMailbox.payload > 999) && (XdrvMailbox.payload <= 65000)) { Settings.web_refresh = XdrvMailbox.payload; } ResponseCmndNumber(Settings.web_refresh); } void CmndWebSend(void) { if (XdrvMailbox.data_len > 0) { uint32_t result = WebSend(XdrvMailbox.data); char stemp1[20]; ResponseCmndChar(GetTextIndexed(stemp1, sizeof(stemp1), result, kWebSendStatus)); } } void CmndWebColor(void) { if (XdrvMailbox.data_len > 0) { if (strchr(XdrvMailbox.data, '{') == nullptr) { // If no JSON it must be parameter if ((XdrvMailbox.data_len > 3) && (XdrvMailbox.index > 0) && (XdrvMailbox.index <= COL_LAST)) { WebHexCode(XdrvMailbox.index -1, XdrvMailbox.data); } else if (0 == XdrvMailbox.payload) { SettingsDefaultWebColor(); } } else { #ifndef FIRMWARE_MINIMAL // if tasmota-minimal, read only and don't parse JSON JsonWebColor(XdrvMailbox.data); #endif // FIRMWARE_MINIMAL } } Response_P(PSTR("{\"" D_CMND_WEBCOLOR "\":[")); for (uint32_t i = 0; i < COL_LAST; i++) { if (i) { ResponseAppend_P(PSTR(",")); } ResponseAppend_P(PSTR("\"#%06x\""), WebColor(i)); } ResponseAppend_P(PSTR("]}")); } void CmndWebSensor(void) { if (XdrvMailbox.index < MAX_XSNS_DRIVERS) { if (XdrvMailbox.payload >= 0) { bitWrite(Settings.sensors[XdrvMailbox.index / 32], XdrvMailbox.index % 32, XdrvMailbox.payload &1); } } Response_P(PSTR("{\"" D_CMND_WEBSENSOR "\":")); XsnsSensorState(); ResponseJsonEnd(); } void CmndWebButton(void) { if ((XdrvMailbox.index > 0) && (XdrvMailbox.index <= MAX_BUTTON_TEXT)) { if (!XdrvMailbox.usridx) { ResponseCmndAll(SET_BUTTON1, MAX_BUTTON_TEXT); } else { if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_BUTTON1 + XdrvMailbox.index -1, ('"' == XdrvMailbox.data[0]) ? "" : XdrvMailbox.data); } ResponseCmndIdxChar(SettingsText(SET_BUTTON1 + XdrvMailbox.index -1)); } } } void CmndCors(void) { if (XdrvMailbox.data_len > 0) { SettingsUpdateText(SET_CORS, (SC_CLEAR == Shortcut()) ? "" : (SC_DEFAULT == Shortcut()) ? CORS_DOMAIN : XdrvMailbox.data); } ResponseCmndChar(SettingsText(SET_CORS)); } /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xdrv01(uint8_t function) { bool result = false; switch (function) { case FUNC_LOOP: PollDnsWebserver(); #ifdef USE_EMULATION if (Settings.flag2.emulation) { PollUdp(); } #endif // USE_EMULATION break; case FUNC_EVERY_SECOND: if (Web.initial_config) { Wifi.config_counter = 200; // Do not restart the device if it has SSId Blank } if (Web.wifi_test_counter) { Web.wifi_test_counter--; AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_WIFI D_TRYING_TO_CONNECT " %s"), SettingsText(SET_STASSID1)); if ( WifiCheck_hasIP(WiFi.localIP()) ) { // Got IP - Connection Established Web.wifi_test_counter = 0; Web.wifiTest = WIFI_TEST_FINISHED_SUCCESSFUL; AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_CMND_SSID "1 %s: " D_CONNECTED " - " D_IP_ADDRESS " %_I"), SettingsText(SET_STASSID1), (uint32_t)WiFi.localIP()); // TasmotaGlobal.blinks = 255; // Signal wifi connection with blinks Settings.sta_config = Web.old_wificonfig; TasmotaGlobal.wifi_state_flag = Settings.sta_config; TasmotaGlobal.save_data_counter = Web.save_data_counter; Settings.save_data = Web.save_data_counter; SettingsSaveAll(); #if (!RESTART_AFTER_INITIAL_WIFI_CONFIG) Web.initial_config = false; Web.state = HTTP_ADMIN; #endif } else if (!Web.wifi_test_counter) { // Test TimeOut Web.wifi_test_counter = 0; Web.wifiTest = WIFI_TEST_FINISHED_BAD; switch (WiFi.status()) { case WL_CONNECTED: AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_CONNECT_FAILED_NO_IP_ADDRESS)); break; case WL_NO_SSID_AVAIL: AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_CONNECT_FAILED_AP_NOT_REACHED)); break; case WL_CONNECT_FAILED: AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_CONNECT_FAILED_WRONG_PASSWORD)); break; default: // WL_IDLE_STATUS and WL_DISCONNECTED AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_WIFI D_CONNECT_FAILED_AP_TIMEOUT)); } int n = WiFi.scanNetworks(); // restart scan } } break; case FUNC_COMMAND: result = DecodeCommand(kWebCommands, WebCommand); break; } return result; } #endif // USE_WEBSERVER