/* xnrg_03_pzem004t.ino - PZEM004T energy sensor support for Tasmota Copyright (C) 2019 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifdef USE_ENERGY_SENSOR #ifdef USE_PZEM004T /*********************************************************************************************\ * PZEM-004T V1 and V2 - Energy * * Source: Victor Ferrer https://github.com/vicfergar/Sonoff-MQTT-OTA-Arduino * Based on: PZEM004T library https://github.com/olehs/PZEM004T * * Hardware Serial will be selected if GPIO1 = [62 PZEM0XX Tx] and GPIO3 = [63 PZEM004 Rx] \*********************************************************************************************/ #define XNRG_03 3 const uint32_t PZEM_STABILIZE = 30; // Number of seconds to stabilize configuration #include TasmotaSerial *PzemSerial = nullptr; #define PZEM_VOLTAGE (uint8_t)0xB0 #define RESP_VOLTAGE (uint8_t)0xA0 #define PZEM_CURRENT (uint8_t)0xB1 #define RESP_CURRENT (uint8_t)0xA1 #define PZEM_POWER (uint8_t)0xB2 #define RESP_POWER (uint8_t)0xA2 #define PZEM_ENERGY (uint8_t)0xB3 #define RESP_ENERGY (uint8_t)0xA3 #define PZEM_SET_ADDRESS (uint8_t)0xB4 #define RESP_SET_ADDRESS (uint8_t)0xA4 #define PZEM_POWER_ALARM (uint8_t)0xB5 #define RESP_POWER_ALARM (uint8_t)0xA5 #define PZEM_DEFAULT_READ_TIMEOUT 500 /*********************************************************************************************/ struct PZEM { float energy = 0; float last_energy = 0; uint8_t send_retry = 0; uint8_t read_state = 0; // Set address uint8_t phase = 0; uint8_t address = 0; } Pzem; struct PZEMCommand { uint8_t command; uint8_t addr[4]; uint8_t data; uint8_t crc; }; uint8_t PzemCrc(uint8_t *data) { uint16_t crc = 0; for (uint32_t i = 0; i < sizeof(PZEMCommand) -1; i++) { crc += *data++; } return (uint8_t)(crc & 0xFF); } void PzemSend(uint8_t cmd) { PZEMCommand pzem; pzem.command = cmd; pzem.addr[0] = 192; // Address 192.168.1.1 for Tasmota legacy reason pzem.addr[1] = 168; pzem.addr[2] = 1; pzem.addr[3] = ((PZEM_SET_ADDRESS == cmd) && Pzem.address) ? Pzem.address : 1 + Pzem.phase; pzem.data = 0; uint8_t *bytes = (uint8_t*)&pzem; pzem.crc = PzemCrc(bytes); PzemSerial->flush(); PzemSerial->write(bytes, sizeof(pzem)); Pzem.address = 0; } bool PzemReceiveReady(void) { return PzemSerial->available() >= (int)sizeof(PZEMCommand); } bool PzemRecieve(uint8_t resp, float *data) { // 0 1 2 3 4 5 6 // A4 00 00 00 00 00 A4 - Set address // A0 00 D4 07 00 00 7B - Voltage (212.7V) // A1 00 00 0A 00 00 AB - Current (0.1A) // A1 00 00 00 00 00 A1 - No current // A2 00 16 00 00 00 B8 - Power (22W) // A2 08 98 00 00 00 42 - Power (2200W) // A2 00 00 00 00 00 A2 - No power // A3 00 08 A4 00 00 4F - Energy (2.212kWh) // A3 01 86 9F 00 00 C9 - Energy (99.999kWh) uint8_t buffer[sizeof(PZEMCommand)] = { 0 }; unsigned long start = millis(); uint8_t len = 0; while ((len < sizeof(PZEMCommand)) && (millis() - start < PZEM_DEFAULT_READ_TIMEOUT)) { if (PzemSerial->available() > 0) { uint8_t c = (uint8_t)PzemSerial->read(); if (!len && ((c & 0xF8) != 0xA0)) { // 10100xxx continue; // fix skewed data } buffer[len++] = c; } } AddLogBuffer(LOG_LEVEL_DEBUG_MORE, buffer, len); if (len != sizeof(PZEMCommand)) { // AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DEBUG "Pzem comms timeout")); return false; } if (buffer[6] != PzemCrc(buffer)) { // AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DEBUG "Pzem crc error")); return false; } if (buffer[0] != resp) { // AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_DEBUG "Pzem bad response")); return false; } switch (resp) { case RESP_VOLTAGE: *data = (float)(buffer[1] << 8) + buffer[2] + (buffer[3] / 10.0); // 65535.x V break; case RESP_CURRENT: *data = (float)(buffer[1] << 8) + buffer[2] + (buffer[3] / 100.0); // 65535.xx A break; case RESP_POWER: *data = (float)(buffer[1] << 8) + buffer[2]; // 65535 W break; case RESP_ENERGY: *data = (float)((uint32_t)buffer[1] << 16) + ((uint16_t)buffer[2] << 8) + buffer[3]; // 16777215 Wh break; } return true; } /*********************************************************************************************/ const uint8_t pzem_commands[] { PZEM_SET_ADDRESS, PZEM_VOLTAGE, PZEM_CURRENT, PZEM_POWER, PZEM_ENERGY }; const uint8_t pzem_responses[] { RESP_SET_ADDRESS, RESP_VOLTAGE, RESP_CURRENT, RESP_POWER, RESP_ENERGY }; void PzemEvery250ms(void) { bool data_ready = PzemReceiveReady(); if (data_ready) { float value = 0; if (PzemRecieve(pzem_responses[Pzem.read_state], &value)) { Energy.data_valid[Pzem.phase] = 0; switch (Pzem.read_state) { case 1: // Voltage as 230.2V Energy.voltage[Pzem.phase] = value; break; case 2: // Current as 17.32A Energy.current[Pzem.phase] = value; break; case 3: // Power as 20W Energy.active_power[Pzem.phase] = value; break; case 4: // Total energy as 99999Wh Pzem.energy += value; if (Pzem.phase == Energy.phase_count -1) { if (Pzem.energy > Pzem.last_energy) { // Handle missed phase if (uptime > PZEM_STABILIZE) { EnergyUpdateTotal(Pzem.energy, false); } Pzem.last_energy = Pzem.energy; } Pzem.energy = 0; } break; } Pzem.read_state++; if (5 == Pzem.read_state) { Pzem.read_state = 1; } // AddLog_P2(LOG_LEVEL_DEBUG, PSTR("PZM: Retry %d"), 5 - Pzem.send_retry); } } if (0 == Pzem.send_retry || data_ready) { if (1 == Pzem.read_state) { if (0 == Pzem.phase) { Pzem.phase = Energy.phase_count -1; } else { Pzem.phase--; } // AddLog_P2(LOG_LEVEL_DEBUG, PSTR("PZM: Probing address %d, Max phases %d"), Pzem.phase +1, Energy.phase_count); } if (Pzem.address) { Pzem.read_state = 0; // Set address } Pzem.send_retry = 5; PzemSend(pzem_commands[Pzem.read_state]); } else { Pzem.send_retry--; if ((Energy.phase_count > 1) && (0 == Pzem.send_retry) && (uptime < PZEM_STABILIZE)) { Energy.phase_count--; // Decrement phases if no response after retry within 30 seconds after restart } } } void PzemSnsInit(void) { // Software serial init needs to be done here as earlier (serial) interrupts may lead to Exceptions PzemSerial = new TasmotaSerial(pin[GPIO_PZEM004_RX], pin[GPIO_PZEM0XX_TX], 1); if (PzemSerial->begin(9600)) { if (PzemSerial->hardwareSerial()) { ClaimSerial(); } Energy.phase_count = 3; // Start off with three phases Pzem.phase = 0; Pzem.read_state = 1; } else { energy_flg = ENERGY_NONE; } } void PzemDrvInit(void) { if ((pin[GPIO_PZEM004_RX] < 99) && (pin[GPIO_PZEM0XX_TX] < 99)) { // Any device with a Pzem004T energy_flg = XNRG_03; } } bool PzemCommand(void) { bool serviced = true; if (CMND_MODULEADDRESS == Energy.command_code) { if ((XdrvMailbox.payload > 0) && (XdrvMailbox.payload < 4)) { Pzem.address = XdrvMailbox.payload; // Valid addresses are 1, 2 and 3 } } else serviced = false; // Unknown command return serviced; } /*********************************************************************************************\ * Interface \*********************************************************************************************/ bool Xnrg03(uint8_t function) { bool result = false; switch (function) { case FUNC_EVERY_250_MSECOND: if (PzemSerial && (uptime > 4)) { PzemEvery250ms(); } break; case FUNC_COMMAND: result = PzemCommand(); break; case FUNC_INIT: PzemSnsInit(); break; case FUNC_PRE_INIT: PzemDrvInit(); break; } return result; } #endif // USE_PZEM004T #endif // USE_ENERGY_SENSOR