# RELEASE NOTES ## Migration Information See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release-6.7.1/) 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. Support of Core versions before 2.7.1 has been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface only. Support for **WPS** and **SmartConfig** has been removed. ## Provided Binary Downloads The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**. - **tasmota.bin** = The Tasmota version with most drivers. **RECOMMENDED RELEASE BINARY** - **tasmota-BG.bin** to **tasmota-TW.bin** = The Tasmota version in different languages. - **tasmota-lite.bin** = The Lite version without most drivers and sensors. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors. - **tasmota-ir** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version. - **tasmota-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**. The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota/release for ESP8266 or http://ota.tasmota.com/tasmota32/release for ESP32. The links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v9.2.0.3 ### Added - Command ``CTRange`` to specify the visible CT range the bulb is capable of [#10311](https://github.com/arendst/Tasmota/issues/10311) - Command ``RuleTimer0`` to access all RuleTimers at once [#10352](https://github.com/arendst/Tasmota/issues/10352) - Command ``VirtualCT`` to simulate or fine tune CT bulbs with 3,4,5 channels [#10311](https://github.com/arendst/Tasmota/issues/10311) - Command ``SetOption40 0..250`` to disable button functionality if activated for over 0.1 second re-introduced - Command ``SetOption43 1..255`` to control Rotary step (#10407) - Command ``SetOption118 1`` to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default [#10353](https://github.com/arendst/Tasmota/issues/10353) - Command ``SetOption119 1`` to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic [#10355](https://github.com/arendst/Tasmota/issues/10355) - Milliseconds to console output [#10152](https://github.com/arendst/Tasmota/issues/10152) - Gpio ``Option_a1`` enabling PWM2 high impedance if powered off as used by Wyze bulbs [#10196](https://github.com/arendst/Tasmota/issues/10196) - Rotary No Pullup GPIO selection ``Rotary A/B_n`` [#10407](https://github.com/arendst/Tasmota/issues/10407) - BSSID and Signal Strength Indicator to GUI wifi scan result [#10253](https://github.com/arendst/Tasmota/issues/10253) - Support for P9813 RGB Led MOSFET controller [#10104](https://github.com/arendst/Tasmota/issues/10104) - Support for GPIO option selection - Support for FTC532 8-button touch controller by Peter Franck [#10222](https://github.com/arendst/Tasmota/issues/10222) - Support for BS814A-2 8-button touch buttons by Peter Franck [#10447](https://github.com/arendst/Tasmota/issues/10447) - Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck [#10481](https://github.com/arendst/Tasmota/issues/10481) - Support for TOF10120 time of flight sensor by Cyril Pawelko [#10190](https://github.com/arendst/Tasmota/issues/10190) - Support for Afrikaans language translations by Christiaan Heerze - Support for IR inverted leds using ``#define IR_SEND_INVERTED true`` [#10301](https://github.com/arendst/Tasmota/issues/10301) - Support for disabling 38kHz IR modulation using ``#define IR_SEND_USE_MODULATION false`` [#10301](https://github.com/arendst/Tasmota/issues/10301) - Support for SPI display driver for ST7789 TFT by Gerhard Mutz [#9037](https://github.com/arendst/Tasmota/issues/9037) - Support for time proportioned (``#define USE_TIMEPROP``) and optional PID (``#define USE_PID``) relay control [#10412](https://github.com/arendst/Tasmota/issues/10412) - Support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther [#3647](https://github.com/arendst/Tasmota/issues/3647) - Support for SM2135 current selection using GPIO ``SM2135 DAT`` index [#10634](https://github.com/arendst/Tasmota/issues/10634) - Support for Sugar Valley NeoPool Controller by Norbert Richter [#10637](https://github.com/arendst/Tasmota/issues/10637) - Support rotary encoder on Shelly Dimmer [#10407](https://github.com/arendst/Tasmota/issues/10407#issuecomment-756240920) - Support character `#` to be replaced by `space`-character in command ``Publish`` topic [#10258](https://github.com/arendst/Tasmota/issues/10258) - Basic support for ESP32 Odroid Go 16MB binary tasmota32-odroidgo.bin [#8630](https://github.com/arendst/Tasmota/issues/8630) - Basic support for ESP32 M5stack core2 16MB binary tasmota32-core2.bin [#10635](https://github.com/arendst/Tasmota/issues/10635) - Rule trigger string comparisons for EndsWith ``$>``, StartsWith ``$<`` and Contains ``$|`` [#10538](https://github.com/arendst/Tasmota/issues/10538) - SPI display driver SSD1331 Color oled by Jeroen Vermeulen [#10376](https://github.com/arendst/Tasmota/issues/10376) - Compile time option ``USE_MQTT_TLS_DROP_OLD_FINGERPRINT`` to drop old (less secure) TLS fingerprint ### Breaking Changed - ESP32 switch from default SPIFFS to default LittleFS file system loosing current (zigbee) files - Replaced MFRC522 13.56MHz rfid card reader GPIO selection from ``SPI CS`` by ``RC522 CS`` - Replaced NRF24L01 GPIO selection from ``SPI CS`` by ``NRF24 CS`` and ``SPI DC`` by ``NRF24 DC`` - Replaced ILI9341 GPIO selection from ``SPI CS`` by ``ILI9341 CS`` and ``SPI DC`` by ``ILI9341 DC`` - Replaced ST7789 GPIO selection from ``SPI CS`` by ``ST7789 CS`` and ``SPI DC`` by ``ST7789 DC`` - Replaced ILI9488 GPIO selection from ``SPI CS`` by ``ILI9488_CS`` - Replaced EPaper29 GPIO selection from ``SPI CS`` by ``EPaper29 CS`` - Replaced EPaper42 GPIO selection from ``SPI CS`` by ``EPaper42 CS`` - Replaced SSD1351 GPIO selection from ``SPI CS`` by ``SSD1351 CS`` - Replaced RA8876 GPIO selection from ``SPI CS`` by ``RA8876 CS`` ### Changed - Command ``Sleep 0`` removes any sleep from wifi modem except when ESP32 BLE is active - Logging from heap to stack freeing 700 bytes RAM - Disabled ``USE_LIGHT`` light support for ZBBridge saving 17.6kB [#10374](https://github.com/arendst/Tasmota/issues/10374) - Force initial default state ``SetOption57 1`` to scan wifi network every 44 minutes for strongest signal [#10395](https://github.com/arendst/Tasmota/issues/10395) - PubSubClient MQTT_SOCKET_TIMEOUT from 15 to 4 seconds - Domoticz fixed 2 decimals resolution by user selectable ``TempRes``, ``HumRes`` and ``PressRes`` resolutions ### Fixed - Redesign syslog and mqttlog using log buffer [#10164](https://github.com/arendst/Tasmota/issues/10164) - Shutter stop issue [#10170](https://github.com/arendst/Tasmota/issues/10170) - Scripter script_sub_command [#10181](https://github.com/arendst/Tasmota/issues/10181) - Scripter JSON variable above 32 chars [#10193](https://github.com/arendst/Tasmota/issues/10193) - Shelly Dimmer power on state [#10154](https://github.com/arendst/Tasmota/issues/10154) [#10182](https://github.com/arendst/Tasmota/issues/10182) - Wemo emulation for single devices [#10165](https://github.com/arendst/Tasmota/issues/10165) [#10194](https://github.com/arendst/Tasmota/issues/10194) - ESP32 LoadStoreError when using ``#define USER_TEMPLATE`` [#9506](https://github.com/arendst/Tasmota/issues/9506) - Compile error when ``#ifdef USE_IR_RECEIVE`` is disabled regression from 9.1.0.2 - Prometheus memory leak [#10221](https://github.com/arendst/Tasmota/issues/10221)