/* tasmota_template_ESP32.h - template settings for Tasmota Copyright (C) 2020 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _TASMOTA_TEMPLATE_ESP32_H_ #define _TASMOTA_TEMPLATE_ESP32_H_ #ifdef ESP32 // Hardware has no ESP32 #undef USE_TUYA_DIMMER #undef USE_PWM_DIMMER #undef USE_EXS_DIMMER #undef USE_ARMTRONIX_DIMMERS #undef USE_SONOFF_RF #undef USE_SONOFF_SC #undef USE_SONOFF_IFAN #undef USE_SONOFF_L1 #undef USE_SONOFF_D1 #undef USE_RF_FLASH // Not ported (yet) #undef USE_DISCOVERY #undef USE_ADC_VCC // Needs to be ported #undef USE_DEEPSLEEP #undef USE_MY92X1 #undef USE_TUYA_MCU #undef USE_PS_16_DZ enum UserSelectablePins { GPIO_NONE, // Not used GPIO_KEY1, // 4 x Button usually connected to GPIO0 GPIO_KEY1_NP, GPIO_KEY1_INV, GPIO_KEY1_INV_NP, GPIO_SWT1, // 8 x User connected external switches GPIO_SWT1_NP, GPIO_REL1, // 8 x Relays GPIO_REL1_INV, GPIO_LED1, // 4 x Leds GPIO_LED1_INV, GPIO_CNTR1, // 4 x Counter GPIO_CNTR1_NP, GPIO_PWM1, // 5 x PWM GPIO_PWM1_INV, GPIO_BUZZER, // Buzzer GPIO_BUZZER_INV, // Inverted buzzer GPIO_LEDLNK, // Link led GPIO_LEDLNK_INV, // Inverted link led GPIO_I2C_SCL, // I2C SCL GPIO_I2C_SDA, // I2C SDA GPIO_SPI_MISO, // SPI MISO GPIO_SPI_MOSI, // SPI MOSI GPIO_SPI_CLK, // SPI Clk GPIO_SPI_CS, // SPI Chip Select GPIO_SPI_DC, // SPI Data Direction GPIO_SSPI_MISO, // Software SPI Master Input Slave Output GPIO_SSPI_MOSI, // Software SPI Master Output Slave Input GPIO_SSPI_SCLK, // Software SPI Serial Clock GPIO_SSPI_CS, // Software SPI Chip Select GPIO_SSPI_DC, // Software SPI Data or Command GPIO_BACKLIGHT, // Display backlight control GPIO_OLED_RESET, // OLED Display Reset GPIO_IRSEND, // IR remote GPIO_IRRECV, // IR receiver GPIO_RFSEND, // RF transmitter GPIO_RFRECV, // RF receiver GPIO_DHT11, // DHT11 GPIO_DHT22, // DHT21, DHT22, AM2301, AM2302, AM2321 GPIO_SI7021, // iTead SI7021 GPIO_DHT11_OUT, // Pseudo Single wire DHT11, DHT21, DHT22, AM2301, AM2302, AM2321 GPIO_DSB, // Single wire DS18B20 or DS18S20 GPIO_DSB_OUT, // Pseudo Single wire DS18B20 or DS18S20 GPIO_WS2812, // WS2812 Led string GPIO_MHZ_TXD, // MH-Z19 Serial interface GPIO_MHZ_RXD, // MH-Z19 Serial interface GPIO_PZEM0XX_TX, // PZEM0XX Serial interface GPIO_PZEM004_RX, // PZEM004T Serial interface GPIO_PZEM016_RX, // PZEM-014,016 Serial Modbus interface GPIO_PZEM017_RX, // PZEM-003,017 Serial Modbus interface GPIO_SAIR_TX, // SenseAir Serial interface GPIO_SAIR_RX, // SenseAir Serial interface GPIO_PMS5003_TX, // Plantower PMS5003 Serial interface GPIO_PMS5003_RX, // Plantower PMS5003 Serial interface GPIO_SDS0X1_TX, // Nova Fitness SDS011 Serial interface GPIO_SDS0X1_RX, // Nova Fitness SDS011 Serial interface GPIO_SBR_TX, // Serial Bridge Serial interface GPIO_SBR_RX, // Serial Bridge Serial interface GPIO_SR04_TRIG, // SR04 Trigger/TX pin GPIO_SR04_ECHO, // SR04 Echo/RX pin GPIO_SDM120_TX, // SDM120 Serial interface GPIO_SDM120_RX, // SDM120 Serial interface GPIO_SDM630_TX, // SDM630 Serial interface GPIO_SDM630_RX, // SDM630 Serial interface GPIO_TM16CLK, // TM1638 Clock GPIO_TM16DIO, // TM1638 Data I/O GPIO_TM16STB, // TM1638 Strobe GPIO_MP3_DFR562, // RB-DFR-562, DFPlayer Mini MP3 Player GPIO_HX711_SCK, // HX711 Load Cell clock GPIO_HX711_DAT, // HX711 Load Cell data GPIO_TX2X_TXD_BLACK, // TX20/TX23 Transmission Pin GPIO_TUYA_TX, // Tuya Serial interface GPIO_TUYA_RX, // Tuya Serial interface GPIO_MGC3130_XFER, // MGC3130 Transfer GPIO_MGC3130_RESET, // MGC3130 Reset GPIO_RF_SENSOR, // Rf receiver with sensor decoding GPIO_AZ_TXD, // AZ-Instrument 7798 Serial interface GPIO_AZ_RXD, // AZ-Instrument 7798 Serial interface GPIO_MAX31855CS, // MAX31855 Serial interface GPIO_MAX31855CLK, // MAX31855 Serial interface GPIO_MAX31855DO, // MAX31855 Serial interface GPIO_NRG_SEL, // HLW8012/HLJ-01 Sel output (1 = Voltage) GPIO_NRG_SEL_INV, // HLW8012/HLJ-01 Sel output (0 = Voltage) GPIO_NRG_CF1, // HLW8012/HLJ-01 CF1 voltage / current GPIO_HLW_CF, // HLW8012 CF power GPIO_HJL_CF, // HJL-01/BL0937 CF power GPIO_MCP39F5_TX, // MCP39F501 Serial interface (Shelly2) GPIO_MCP39F5_RX, // MCP39F501 Serial interface (Shelly2) GPIO_MCP39F5_RST, // MCP39F501 Reset (Shelly2) GPIO_PN532_TXD, // PN532 NFC Serial Tx GPIO_PN532_RXD, // PN532 NFC Serial Rx GPIO_SM16716_CLK, // SM16716 CLOCK GPIO_SM16716_DAT, // SM16716 DATA GPIO_SM16716_SEL, // SM16716 SELECT GPIO_DI, // my92x1 PWM input GPIO_DCKI, // my92x1 CLK input GPIO_CSE7766_TX, // CSE7766 Serial interface (S31 and Pow R2) - Not used anymore 20200121 GPIO_CSE7766_RX, // CSE7766 Serial interface (S31 and Pow R2) GPIO_ARIRFRCV, // AriLux RF Receive input GPIO_TXD, // Serial interface GPIO_RXD, // Serial interface GPIO_ROT1A, // Rotary switch1 A Pin GPIO_ROT1B, // Rotary switch1 B Pin GPIO_ROT2A, // Rotary switch2 A Pin GPIO_ROT2B, // Rotary switch2 B Pin GPIO_HRE_CLOCK, // Clock/Power line for HR-E Water Meter GPIO_HRE_DATA, // Data line for HR-E Water Meter GPIO_ADE7953_IRQ, // ADE7953 IRQ GPIO_ARIRFSEL, // Arilux RF Receive input selected GPIO_SOLAXX1_TX, // Solax Inverter tx pin GPIO_SOLAXX1_RX, // Solax Inverter rx pin GPIO_ZIGBEE_TX, // Zigbee Serial interface GPIO_ZIGBEE_RX, // Zigbee Serial interface GPIO_RDM6300_RX, // RDM6300 RX GPIO_IBEACON_TX, // HM17 IBEACON TX GPIO_IBEACON_RX, // HM17 IBEACON RX GPIO_A4988_DIR, // A4988 direction pin GPIO_A4988_STP, // A4988 step pin GPIO_A4988_ENA, // A4988 enabled pin GPIO_A4988_MS1, // A4988 microstep pin1 GPIO_A4988_MS2, // A4988 microstep pin2 GPIO_A4988_MS3, // A4988 microstep pin3 GPIO_DDS2382_TX, // DDS2382 Serial interface GPIO_DDS2382_RX, // DDS2382 Serial interface GPIO_DDSU666_TX, // DDSU666 Serial interface GPIO_DDSU666_RX, // DDSU666 Serial interface GPIO_SM2135_CLK, // SM2135 Clk GPIO_SM2135_DAT, // SM2135 Dat GPIO_DEEPSLEEP, // Kill switch for deepsleep GPIO_EXS_ENABLE, // EXS MCU Enable GPIO_TASMOTASLAVE_TXD, // Slave TX GPIO_TASMOTASLAVE_RXD, // Slave RX GPIO_TASMOTASLAVE_RST, // Slave Reset Pin GPIO_TASMOTASLAVE_RST_INV, // Slave Reset Inverted GPIO_HPMA_RX, // Honeywell HPMA115S0 Serial interface GPIO_HPMA_TX, // Honeywell HPMA115S0 Serial interface GPIO_GPS_RX, // GPS serial interface GPIO_GPS_TX, // GPS serial interface GPIO_HM10_RX, // HM10-BLE-Mijia-bridge serial interface GPIO_HM10_TX, // HM10-BLE-Mijia-bridge serial interface GPIO_LE01MR_RX, // F&F LE-01MR energy meter GPIO_LE01MR_TX, // F&F LE-01MR energy meter GPIO_CC1101_GDO0, // CC1101 pin for RX GPIO_CC1101_GDO2, // CC1101 pin for RX GPIO_HRXL_RX, // Data from MaxBotix HRXL sonar range sensor GPIO_ELECTRIQ_MOODL_TX, // ElectriQ iQ-wifiMOODL Serial TX GPIO_AS3935, ADC0_INPUT, // Analog input ADC0_TEMP, // Thermistor ADC0_LIGHT, // Light sensor ADC0_BUTTON, // Button ADC0_BUTTON_INV, ADC0_RANGE, // Range ADC0_CT_POWER, // Current // webcam interface GPIO_WEBCAM_PWDN_GPIO_NUM, GPIO_WEBCAM_RESET_GPIO_NUM, GPIO_WEBCAM_XCLK_GPIO_NUM, GPIO_WEBCAM_SIOD_GPIO_NUM, GPIO_WEBCAM_SIOC_GPIO_NUM, GPIO_WEBCAM_Y9_GPIO_NUM, GPIO_WEBCAM_Y8_GPIO_NUM, GPIO_WEBCAM_Y7_GPIO_NUM, GPIO_WEBCAM_Y6_GPIO_NUM, GPIO_WEBCAM_Y5_GPIO_NUM, GPIO_WEBCAM_Y4_GPIO_NUM, GPIO_WEBCAM_Y3_GPIO_NUM, GPIO_WEBCAM_Y2_GPIO_NUM, GPIO_WEBCAM_VSYNC_GPIO_NUM, GPIO_WEBCAM_HREF_GPIO_NUM, GPIO_WEBCAM_PCLK_GPIO_NUM, GPIO_WEBCAM_PSCLK_GPIO_NUM, GPIO_WEBCAM_HSD1_GPIO_NUM, GPIO_WEBCAM_HSD2_GPIO_NUM, GPIO_WEBCAM_HSD3_GPIO_NUM, GPIO_WEBCAM_PSRCS_GPIO_NUM, GPIO_SENSOR_END }; enum ProgramSelectablePins { // GPIO_FIX_START = 254, GPIO_FIX_START = 2046, GPIO_USER, // User configurable needs to be 2047 GPIO_MAX }; // Text in webpage Module Parameters and commands GPIOS and GPIO const char kSensorNames[] PROGMEM = D_SENSOR_NONE "|" D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "n|" D_SENSOR_BUTTON "i|" D_SENSOR_BUTTON "in|" D_SENSOR_SWITCH "|" D_SENSOR_SWITCH "n|" D_SENSOR_RELAY "|" D_SENSOR_RELAY "i|" D_SENSOR_LED "|" D_SENSOR_LED "i|" D_SENSOR_COUNTER "|" D_SENSOR_COUNTER "n|" D_SENSOR_PWM "|" D_SENSOR_PWM "i|" D_SENSOR_BUZZER "|" D_SENSOR_BUZZER "i|" D_SENSOR_LED_LINK "|" D_SENSOR_LED_LINK "i|" D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|" D_SENSOR_SPI_MISO "|" D_SENSOR_SPI_MOSI "|" D_SENSOR_SPI_CLK "|" D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|" D_SENSOR_SSPI_MISO "|" D_SENSOR_SSPI_MOSI "|" D_SENSOR_SSPI_SCLK "|" D_SENSOR_SSPI_CS "|" D_SENSOR_SSPI_DC "|" D_SENSOR_BACKLIGHT "|" D_SENSOR_OLED_RESET "|" D_SENSOR_IRSEND "|" D_SENSOR_IRRECV "|" D_SENSOR_RFSEND "|" D_SENSOR_RFRECV "|" D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|" D_SENSOR_DHT11 "o|" D_SENSOR_DS18X20 "|" D_SENSOR_DS18X20 "o|" D_SENSOR_WS2812 "|" D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|" D_SENSOR_PZEM0XX_TX "|" D_SENSOR_PZEM004_RX "|" D_SENSOR_PZEM016_RX "|" D_SENSOR_PZEM017_RX "|" D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|" D_SENSOR_PMS5003_TX "|" D_SENSOR_PMS5003_RX "|" D_SENSOR_SDS0X1_TX "|" D_SENSOR_SDS0X1_RX "|" D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|" D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|" D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|" D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX "|" D_SENSOR_TM1638_CLK "|" D_SENSOR_TM1638_DIO "|" D_SENSOR_TM1638_STB "|" D_SENSOR_DFR562 "|" D_SENSOR_HX711_SCK "|" D_SENSOR_HX711_DAT "|" D_SENSOR_TX2X_TX "|" D_SENSOR_TUYA_TX "|" D_SENSOR_TUYA_RX "|" D_SENSOR_MGC3130_XFER "|" D_SENSOR_MGC3130_RESET "|" D_SENSOR_RF_SENSOR "|" D_SENSOR_AZ_TX "|" D_SENSOR_AZ_RX "|" D_SENSOR_MAX31855_CS "|" D_SENSOR_MAX31855_CLK "|" D_SENSOR_MAX31855_DO "|" D_SENSOR_NRG_SEL "|" D_SENSOR_NRG_SEL "i|" D_SENSOR_NRG_CF1 "|" D_SENSOR_HLW_CF "|" D_SENSOR_HJL_CF "|" D_SENSOR_MCP39F5_TX "|" D_SENSOR_MCP39F5_RX "|" D_SENSOR_MCP39F5_RST "|" D_SENSOR_PN532_TX "|" D_SENSOR_PN532_RX "|" D_SENSOR_SM16716_CLK "|" D_SENSOR_SM16716_DAT "|" D_SENSOR_SM16716_POWER "|" D_SENSOR_MY92X1_DI "|" D_SENSOR_MY92X1_DCKI "|" D_SENSOR_CSE7766_TX "|" D_SENSOR_CSE7766_RX "|" D_SENSOR_ARIRFRCV "|" D_SENSOR_TXD "|" D_SENSOR_RXD "|" D_SENSOR_ROTARY "1a|" D_SENSOR_ROTARY "1b|" D_SENSOR_ROTARY "2a|" D_SENSOR_ROTARY "2b|" D_SENSOR_HRE_CLOCK "|" D_SENSOR_HRE_DATA "|" D_SENSOR_ADE7953_IRQ "|" D_SENSOR_ARIRFSEL "|" D_SENSOR_SOLAXX1_TX "|" D_SENSOR_SOLAXX1_RX "|" D_SENSOR_ZIGBEE_TXD "|" D_SENSOR_ZIGBEE_RXD "|" D_SENSOR_RDM6300_RX "|" D_SENSOR_IBEACON_TX "|" D_SENSOR_IBEACON_RX "|" D_SENSOR_A4988_DIR "|" D_SENSOR_A4988_STP "|" D_SENSOR_A4988_ENA "|" D_SENSOR_A4988_MS1 "|" D_SENSOR_A4988_MS2 "|" D_SENSOR_A4988_MS3 "|" D_SENSOR_DDS2382_TX "|" D_SENSOR_DDS2382_RX "|" D_SENSOR_DDSU666_TX "|" D_SENSOR_DDSU666_RX "|" D_SENSOR_SM2135_CLK "|" D_SENSOR_SM2135_DAT "|" D_SENSOR_DEEPSLEEP "|" D_SENSOR_EXS_ENABLE "|" D_SENSOR_SLAVE_TX "|" D_SENSOR_SLAVE_RX "|" D_SENSOR_SLAVE_RESET "|" D_SENSOR_SLAVE_RESET "i|" D_SENSOR_HPMA_RX "|" D_SENSOR_HPMA_TX "|" D_SENSOR_GPS_RX "|" D_SENSOR_GPS_TX "|" D_SENSOR_HM10_RX "|" D_SENSOR_HM10_TX "|" D_SENSOR_LE01MR_RX "|" D_SENSOR_LE01MR_TX "|" D_SENSOR_CC1101_GDO0 "|" D_SENSOR_CC1101_GDO2 "|" D_SENSOR_HRXL_RX "|" D_SENSOR_ELECTRIQ_MOODL "|" D_SENSOR_AS3935 "|" D_ANALOG_INPUT "|" D_TEMPERATURE "|" D_LIGHT "|" D_SENSOR_BUTTON "|" D_SENSOR_BUTTON "i|" D_RANGE "|" D_CT_POWER "|" D_GPIO_WEBCAM_PWDN_GPIO_NUM "|" D_GPIO_WEBCAM_RESET_GPIO_NUM "|" D_GPIO_WEBCAM_XCLK_GPIO_NUM "|" D_GPIO_WEBCAM_SIOD_GPIO_NUM "|" D_GPIO_WEBCAM_SIOC_GPIO_NUM "|" D_GPIO_WEBCAM_Y9_GPIO_NUM "|" D_GPIO_WEBCAM_Y8_GPIO_NUM "|" D_GPIO_WEBCAM_Y7_GPIO_NUM "|" D_GPIO_WEBCAM_Y6_GPIO_NUM "|" D_GPIO_WEBCAM_Y5_GPIO_NUM "|" D_GPIO_WEBCAM_Y4_GPIO_NUM "|" D_GPIO_WEBCAM_Y3_GPIO_NUM "|" D_GPIO_WEBCAM_Y2_GPIO_NUM "|" D_GPIO_WEBCAM_VSYNC_GPIO_NUM "|" D_GPIO_WEBCAM_HREF_GPIO_NUM "|" D_GPIO_WEBCAM_PCLK_GPIO_NUM "|" D_GPIO_WEBCAM_PSCLK_GPIO_NUM "|" D_GPIO_WEBCAM_HSD1_GPIO_NUM "|" D_GPIO_WEBCAM_HSD2_GPIO_NUM "|" D_GPIO_WEBCAM_HSD3_GPIO_NUM "|" D_GPIO_WEBCAM_PSRCS_GPIO_NUM ; const char kSensorNamesFixed[] PROGMEM = D_SENSOR_USER; const uint16_t kGpioNiceList[] PROGMEM = { GPIO_NONE, // Not used AGPIO(GPIO_KEY1) + MAX_KEYS, // Buttons AGPIO(GPIO_KEY1_NP) + MAX_KEYS, AGPIO(GPIO_KEY1_INV) + MAX_KEYS, AGPIO(GPIO_KEY1_INV_NP) + MAX_KEYS, AGPIO(GPIO_SWT1) + MAX_SWITCHES, // User connected external switches AGPIO(GPIO_SWT1_NP) + MAX_SWITCHES, AGPIO(GPIO_REL1) + MAX_RELAYS, // Relays AGPIO(GPIO_REL1_INV) + MAX_RELAYS, AGPIO(GPIO_LED1) + MAX_LEDS, // Leds AGPIO(GPIO_LED1_INV) + MAX_LEDS, #ifdef USE_COUNTER AGPIO(GPIO_CNTR1) + MAX_COUNTERS, // Counters AGPIO(GPIO_CNTR1_NP) + MAX_COUNTERS, #endif AGPIO(GPIO_PWM1) + MAX_PWMS, // RGB Red or C Cold White AGPIO(GPIO_PWM1_INV) + MAX_PWMS, #ifdef USE_BUZZER AGPIO(GPIO_BUZZER), // Buzzer AGPIO(GPIO_BUZZER_INV), // Inverted buzzer #endif AGPIO(GPIO_LEDLNK), // Link led AGPIO(GPIO_LEDLNK_INV), // Inverted link led #ifdef USE_I2C AGPIO(GPIO_I2C_SCL), // I2C SCL AGPIO(GPIO_I2C_SDA), // I2C SDA #endif #ifdef USE_SPI AGPIO(GPIO_SPI_MISO), // SPI MISO AGPIO(GPIO_SPI_MOSI), // SPI MOSI AGPIO(GPIO_SPI_CLK), // SPI Clk AGPIO(GPIO_SPI_CS), // SPI Chip Select AGPIO(GPIO_SPI_DC), // SPI Data Direction AGPIO(GPIO_SSPI_MISO), // Software SPI Master Input Slave Output AGPIO(GPIO_SSPI_MOSI), // Software SPI Master Output Slave Input AGPIO(GPIO_SSPI_SCLK), // Software SPI Serial Clock AGPIO(GPIO_SSPI_CS), // Software SPI Chip Select AGPIO(GPIO_SSPI_DC), // Software SPI Data or Command #endif #ifdef USE_DISPLAY AGPIO(GPIO_BACKLIGHT), // Display backlight control AGPIO(GPIO_OLED_RESET), // OLED Display Reset #endif AGPIO(GPIO_TXD), // Serial interface AGPIO(GPIO_RXD), // Serial interface #ifdef USE_DHT AGPIO(GPIO_DHT11), // DHT11 AGPIO(GPIO_DHT22), // DHT21, DHT22, AM2301, AM2302, AM2321 AGPIO(GPIO_SI7021), // iTead SI7021 AGPIO(GPIO_DHT11_OUT), // Pseudo Single wire DHT11, DHT21, DHT22, AM2301, AM2302, AM2321 #endif #ifdef USE_DS18x20 AGPIO(GPIO_DSB), // Single wire DS18B20 or DS18S20 AGPIO(GPIO_DSB_OUT), // Pseudo Single wire DS18B20 or DS18S20 #endif // Light #ifdef USE_LIGHT #ifdef USE_WS2812 AGPIO(GPIO_WS2812), // WS2812 Led string #endif #ifdef USE_ARILUX_RF AGPIO(GPIO_ARIRFRCV), // AriLux RF Receive input AGPIO(GPIO_ARIRFSEL), // Arilux RF Receive input selected #endif #ifdef USE_MY92X1 AGPIO(GPIO_DI), // my92x1 PWM input AGPIO(GPIO_DCKI), // my92x1 CLK input #endif // USE_MY92X1 #ifdef USE_SM16716 AGPIO(GPIO_SM16716_CLK), // SM16716 CLOCK AGPIO(GPIO_SM16716_DAT), // SM16716 DATA AGPIO(GPIO_SM16716_SEL), // SM16716 SELECT #endif // USE_SM16716 #ifdef USE_SM2135 AGPIO(GPIO_SM2135_CLK), // SM2135 CLOCK AGPIO(GPIO_SM2135_DAT), // SM2135 DATA #endif // USE_SM2135 #ifdef USE_TUYA_MCU AGPIO(GPIO_TUYA_TX), // Tuya Serial interface AGPIO(GPIO_TUYA_RX), // Tuya Serial interface #endif #ifdef USE_EXS_DIMMER AGPIO(GPIO_EXS_ENABLE), // EXS MCU Enable #endif #ifdef USE_ELECTRIQ_MOODL AGPIO(GPIO_ELECTRIQ_MOODL_TX), #endif #endif // USE_LIGHT #if defined(USE_IR_REMOTE) || defined(USE_IR_REMOTE_FULL) AGPIO(GPIO_IRSEND), // IR remote #if defined(USE_IR_RECEIVE) || defined(USE_IR_REMOTE_FULL) AGPIO(GPIO_IRRECV), // IR receiver #endif #endif #ifdef USE_RC_SWITCH AGPIO(GPIO_RFSEND), // RF transmitter AGPIO(GPIO_RFRECV), // RF receiver #endif #ifdef USE_RF_SENSOR AGPIO(GPIO_RF_SENSOR), // Rf receiver with sensor decoding #endif #ifdef USE_SR04 AGPIO(GPIO_SR04_TRIG), // SR04 Tri/TXgger pin AGPIO(GPIO_SR04_ECHO), // SR04 Ech/RXo pin #endif #ifdef USE_TM1638 AGPIO(GPIO_TM16CLK), // TM1638 Clock AGPIO(GPIO_TM16DIO), // TM1638 Data I/O AGPIO(GPIO_TM16STB), // TM1638 Strobe #endif #ifdef USE_HX711 AGPIO(GPIO_HX711_SCK), // HX711 Load Cell clock AGPIO(GPIO_HX711_DAT), // HX711 Load Cell data #endif // Energy sensors #ifdef USE_ENERGY_SENSOR #ifdef USE_HLW8012 AGPIO(GPIO_NRG_SEL), // HLW8012/HLJ-01 Sel output (1 = Voltage) AGPIO(GPIO_NRG_SEL_INV), // HLW8012/HLJ-01 Sel output (0 = Voltage) AGPIO(GPIO_NRG_CF1), // HLW8012/HLJ-01 CF1 voltage / current AGPIO(GPIO_HLW_CF), // HLW8012 CF power AGPIO(GPIO_HJL_CF), // HJL-01/BL0937 CF power #endif #if defined(USE_I2C) && defined(USE_ADE7953) AGPIO(GPIO_ADE7953_IRQ), // ADE7953 IRQ #endif #ifdef USE_CSE7766 AGPIO(GPIO_CSE7766_TX), // CSE7766 Serial interface (S31 and Pow R2) AGPIO(GPIO_CSE7766_RX), // CSE7766 Serial interface (S31 and Pow R2) #endif #ifdef USE_MCP39F501 AGPIO(GPIO_MCP39F5_TX), // MCP39F501 Serial interface (Shelly2) AGPIO(GPIO_MCP39F5_RX), // MCP39F501 Serial interface (Shelly2) AGPIO(GPIO_MCP39F5_RST), // MCP39F501 Reset (Shelly2) #endif #if defined(USE_PZEM004T) || defined(USE_PZEM_AC) || defined(USE_PZEM_DC) AGPIO(GPIO_PZEM0XX_TX), // PZEM0XX Serial interface #endif #ifdef USE_PZEM004T AGPIO(GPIO_PZEM004_RX), // PZEM004T Serial interface #endif #ifdef USE_PZEM_AC AGPIO(GPIO_PZEM016_RX), // PZEM-014,016 Serial Modbus interface #endif #ifdef USE_PZEM_DC AGPIO(GPIO_PZEM017_RX), // PZEM-003,017 Serial Modbus interface #endif #ifdef USE_SDM120 AGPIO(GPIO_SDM120_TX), // SDM120 Serial interface AGPIO(GPIO_SDM120_RX), // SDM120 Serial interface #endif #ifdef USE_SDM630 AGPIO(GPIO_SDM630_TX), // SDM630 Serial interface AGPIO(GPIO_SDM630_RX), // SDM630 Serial interface #endif #ifdef USE_DDS2382 AGPIO(GPIO_DDS2382_TX), // DDS2382 Serial interface AGPIO(GPIO_DDS2382_RX), // DDS2382 Serial interface #endif #ifdef USE_DDSU666 AGPIO(GPIO_DDSU666_TX), // DDSU666 Serial interface AGPIO(GPIO_DDSU666_RX), // DDSU666 Serial interface #endif // USE_DDSU666 #ifdef USE_SOLAX_X1 AGPIO(GPIO_SOLAXX1_TX), // Solax Inverter tx pin AGPIO(GPIO_SOLAXX1_RX), // Solax Inverter rx pin #endif // USE_SOLAX_X1 #ifdef USE_LE01MR AGPIO(GPIO_LE01MR_RX), // F7F LE-01MR energy meter rx pin AGPIO(GPIO_LE01MR_TX), // F7F LE-01MR energy meter tx pin #endif // IFDEF:USE_LE01MR #endif // USE_ENERGY_SENSOR // Serial #ifdef USE_SERIAL_BRIDGE AGPIO(GPIO_SBR_TX), // Serial Bridge Serial interface AGPIO(GPIO_SBR_RX), // Serial Bridge Serial interface #endif #ifdef USE_ZIGBEE AGPIO(GPIO_ZIGBEE_TX), // Zigbee Serial interface AGPIO(GPIO_ZIGBEE_RX), // Zigbee Serial interface #endif #ifdef USE_MHZ19 AGPIO(GPIO_MHZ_TXD), // MH-Z19 Serial interface AGPIO(GPIO_MHZ_RXD), // MH-Z19 Serial interface #endif #ifdef USE_SENSEAIR AGPIO(GPIO_SAIR_TX), // SenseAir Serial interface AGPIO(GPIO_SAIR_RX), // SenseAir Serial interface #endif #ifdef USE_NOVA_SDS AGPIO(GPIO_SDS0X1_TX), // Nova Fitness SDS011 Serial interface AGPIO(GPIO_SDS0X1_RX), // Nova Fitness SDS011 Serial interface #endif #ifdef USE_HPMA AGPIO(GPIO_HPMA_TX), // Honeywell HPMA115S0 Serial interface AGPIO(GPIO_HPMA_RX), // Honeywell HPMA115S0 Serial interface #endif #ifdef USE_PMS5003 AGPIO(GPIO_PMS5003_TX), // Plantower PMS5003 Serial interface AGPIO(GPIO_PMS5003_RX), // Plantower PMS5003 Serial interface #endif #if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR) AGPIO(GPIO_TX2X_TXD_BLACK), // TX20/TX23 Transmission Pin #endif #ifdef USE_MP3_PLAYER AGPIO(GPIO_MP3_DFR562), // RB-DFR-562, DFPlayer Mini MP3 Player Serial interface #endif #ifdef USE_AZ7798 AGPIO(GPIO_AZ_TXD), // AZ-Instrument 7798 CO2 datalogger Serial interface AGPIO(GPIO_AZ_RXD), // AZ-Instrument 7798 CO2 datalogger Serial interface #endif #ifdef USE_PN532_HSU AGPIO(GPIO_PN532_TXD), // PN532 HSU Tx AGPIO(GPIO_PN532_RXD), // PN532 HSU Rx #endif #ifdef USE_TASMOTA_SLAVE AGPIO(GPIO_TASMOTASLAVE_TXD), // Tasmota Slave TX AGPIO(GPIO_TASMOTASLAVE_RXD), // Tasmota Slave RX AGPIO(GPIO_TASMOTASLAVE_RST), // Tasmota Slave Reset AGPIO(GPIO_TASMOTASLAVE_RST_INV), // Tasmota Slave Reset Inverted #endif #ifdef USE_RDM6300 AGPIO(GPIO_RDM6300_RX), #endif #ifdef USE_IBEACON AGPIO(GPIO_IBEACON_RX), AGPIO(GPIO_IBEACON_TX), #endif #ifdef USE_GPS AGPIO(GPIO_GPS_RX), // GPS serial interface AGPIO(GPIO_GPS_TX), // GPS serial interface #endif #ifdef USE_HM10 AGPIO(GPIO_HM10_RX), // GPS serial interface AGPIO(GPIO_HM10_TX), // GPS serial interface #endif #ifdef USE_MGC3130 AGPIO(GPIO_MGC3130_XFER), AGPIO(GPIO_MGC3130_RESET), #endif #ifdef USE_MAX31855 AGPIO(GPIO_MAX31855CS), // MAX31855 Serial interface AGPIO(GPIO_MAX31855CLK), // MAX31855 Serial interface AGPIO(GPIO_MAX31855DO), // MAX31855 Serial interface #endif #ifdef ROTARY_V1 AGPIO(GPIO_ROT1A), // Rotary switch1 A Pin AGPIO(GPIO_ROT1B), // Rotary switch1 B Pin AGPIO(GPIO_ROT2A), // Rotary switch2 A Pin AGPIO(GPIO_ROT2B), // Rotary switch2 B Pin #endif #ifdef USE_HRE AGPIO(GPIO_HRE_CLOCK), AGPIO(GPIO_HRE_DATA), #endif #ifdef USE_A4988_STEPPER AGPIO(GPIO_A4988_DIR), // A4988 direction pin AGPIO(GPIO_A4988_STP), // A4988 step pin // folowing are not mandatory AGPIO(GPIO_A4988_ENA), // A4988 enabled pin AGPIO(GPIO_A4988_MS1), // A4988 microstep pin1 AGPIO(GPIO_A4988_MS2), // A4988 microstep pin2 AGPIO(GPIO_A4988_MS3), // A4988 microstep pin3 #endif #ifdef USE_DEEPSLEEP AGPIO(GPIO_DEEPSLEEP), #endif #ifdef USE_KEELOQ AGPIO(GPIO_CC1101_GDO0), // CC1101 pin for RX AGPIO(GPIO_CC1101_GDO2), // CC1101 pin for RX #endif #ifdef USE_HRXL AGPIO(GPIO_HRXL_RX), #endif #ifdef USE_AS3935 AGPIO(GPIO_AS3935), #endif /* #ifndef USE_ADC_VCC AGPIO(ADC0_INPUT), // Analog input AGPIO(ADC0_TEMP), // Thermistor AGPIO(ADC0_LIGHT), // Light sensor AGPIO(ADC0_BUTTON), // Button AGPIO(ADC0_BUTTON_INV), AGPIO(ADC0_RANGE), // Range AGPIO(ADC0_CT_POWER), // Current #endif */ #if defined(ESP32) && defined(USE_WEBCAM) AGPIO(GPIO_WEBCAM_PWDN_GPIO_NUM), AGPIO(GPIO_WEBCAM_RESET_GPIO_NUM), AGPIO(GPIO_WEBCAM_XCLK_GPIO_NUM), AGPIO(GPIO_WEBCAM_SIOD_GPIO_NUM), AGPIO(GPIO_WEBCAM_SIOC_GPIO_NUM), AGPIO(GPIO_WEBCAM_Y9_GPIO_NUM), AGPIO(GPIO_WEBCAM_Y8_GPIO_NUM), AGPIO(GPIO_WEBCAM_Y7_GPIO_NUM), AGPIO(GPIO_WEBCAM_Y6_GPIO_NUM), AGPIO(GPIO_WEBCAM_Y5_GPIO_NUM), AGPIO(GPIO_WEBCAM_Y4_GPIO_NUM), AGPIO(GPIO_WEBCAM_Y3_GPIO_NUM), AGPIO(GPIO_WEBCAM_Y2_GPIO_NUM), AGPIO(GPIO_WEBCAM_VSYNC_GPIO_NUM), AGPIO(GPIO_WEBCAM_HREF_GPIO_NUM), AGPIO(GPIO_WEBCAM_PCLK_GPIO_NUM), AGPIO(GPIO_WEBCAM_PSCLK_GPIO_NUM), AGPIO(GPIO_WEBCAM_HSD1_GPIO_NUM), AGPIO(GPIO_WEBCAM_HSD2_GPIO_NUM), AGPIO(GPIO_WEBCAM_HSD3_GPIO_NUM), AGPIO(GPIO_WEBCAM_PSRCS_GPIO_NUM), #endif }; //******************************************************************************************** #define MAX_GPIO_PIN 40 // Number of supported GPIO #define MIN_FLASH_PINS 4 // Number of flash chip pins unusable for configuration (GPIO6, 7, 8 and 11) #define MAX_USER_PINS 36 // MAX_GPIO_PIN - MIN_FLASH_PINS #define WEMOS_MODULE 0 // Wemos module // 0 1 2 3 4 5 6 7 8 9101112131415161718192021222324252627282930313233343536373839 const char PINS_WEMOS[] PROGMEM = "IOTXIORXIOIOflashcFLFLolIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOIOA6A7A0IoIoA3"; //******************************************************************************************** typedef struct MYIO { uint16_t io[MAX_GPIO_PIN]; } myio; // 40 * 2 = 80 bytes typedef struct MYCFGIO { uint16_t io[MAX_USER_PINS]; } mycfgio; // 36 * 2 = 72 bytes #define GPIO_FLAG_USED 0 // Currently no flags used typedef union { uint16_t data; struct { uint16_t spare00 : 1; uint16_t spare01 : 1; uint16_t spare02 : 1; uint16_t spare03 : 1; uint16_t spare04 : 1; uint16_t spare05 : 1; uint16_t spare06 : 1; uint16_t spare07 : 1; uint16_t spare08 : 1; uint16_t spare09 : 1; uint16_t spare10 : 1; uint16_t spare11 : 1; uint16_t spare12 : 1; uint16_t spare13 : 1; uint16_t spare14 : 1; uint16_t spare15 : 1; }; } gpio_flag; // 2 bytes typedef struct MYTMPLT { mycfgio gp; // 72 bytes gpio_flag flag; // 2 bytes } mytmplt; // 74 bytes /********************************************************************************************/ // Supported hardware modules enum SupportedModules { WEMOS, ESP32_CAM_AITHINKER, MAXMODULE}; #define USER_MODULE 255 const char kModuleNames[] PROGMEM = "ESP32-DevKit|ESP32 Cam AiThinker"; // Default module settings const uint8_t kModuleNiceList[MAXMODULE] PROGMEM = { WEMOS, ESP32_CAM_AITHINKER }; const mytmplt kModules PROGMEM = { // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32) AGPIO(GPIO_USER), // 0 (I)O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK AGPIO(GPIO_USER), // 1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 AGPIO(GPIO_USER), // 2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0 AGPIO(GPIO_USER), // 3 IO RXD0 GPIO3, U0RXD, CLK_OUT2 AGPIO(GPIO_USER), // 4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER AGPIO(GPIO_USER), // 5 IO GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK // 6 IO GPIO6, Flash CLK // 7 IO GPIO7, Flash D0 // 8 IO GPIO8, Flash D1 AGPIO(GPIO_USER), // 9 IO GPIO9, Flash D2, U1RXD AGPIO(GPIO_USER), // 10 IO GPIO10, Flash D3, U1TXD // 11 IO GPIO11, Flash CMD AGPIO(GPIO_USER), // 12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.) AGPIO(GPIO_USER), // 13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER AGPIO(GPIO_USER), // 14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2 AGPIO(GPIO_USER), // 15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.) AGPIO(GPIO_USER), // 16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT AGPIO(GPIO_USER), // 17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180 AGPIO(GPIO_USER), // 18 IO GPIO18, VSPICLK, HS1_DATA7 AGPIO(GPIO_USER), // 19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0 0, // 20 AGPIO(GPIO_USER), // 21 IO GPIO21, VSPIHD, EMAC_TX_EN AGPIO(GPIO_USER), // 22 IO LED GPIO22, VSPIWP, U0RTS, EMAC_TXD1 AGPIO(GPIO_USER), // 23 IO GPIO23, VSPID, HS1_STROBE 0, // 24 AGPIO(GPIO_USER), // 25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 AGPIO(GPIO_USER), // 26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 AGPIO(GPIO_USER), // 27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV 0, // 28 0, // 29 0, // 30 0, // 31 AGPIO(GPIO_USER), // 32 IO GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9 AGPIO(GPIO_USER), // 33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8 AGPIO(GPIO_USER), // 34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4 AGPIO(GPIO_USER), // 35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5 AGPIO(GPIO_USER), // 36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0 0, // 37 NO PULLUP 0, // 38 NO PULLUP AGPIO(GPIO_USER), // 39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3 0 // Flag }; #endif // ESP32 #endif // _TASMOTA_TEMPLATE_ESP32_H_