# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release-6.7.1/) 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. Support of Core versions before 2.7.1 has been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface only. Support for **WPS** and **SmartConfig** has been removed. ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**. - **tasmota.bin** = The Tasmota version with most drivers. **RECOMMENDED RELEASE BINARY** - **tasmota-BG.bin** to **tasmota-TW.bin** = The Tasmota version in different languages. - **tasmota-lite.bin** = The Lite version without most drivers and sensors. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version. - **tasmota-minimal.bin** = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version **should NOT be used for initial installation**. Above binaries are also available as gzipped version allowing faster uploads. The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota/release. The links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32 based The following binary downloads have been compiled with ESP32/Arduino library core version **1.0.6**. - **tasmota32.bin** = The Tasmota version with most drivers. **RECOMMENDED RELEASE BINARY** - **tasmota32-BG.bin** to **tasmota32-TW.bin** = The Tasmota version in different languages. - **tasmota32-lite.bin** = The Lite version without most drivers and sensors. - **tasmota32-knx.bin** = The Knx version without some features but adds KNX support. - **tasmota32-sensors.bin** = The Sensors version adds more useful sensors. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support. - **tasmota32-webcam.bin** = The Webcam version adds webcam support. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support. - **tasmota32-odroidgo.bin** = The Odroid-Go version is specifically tailored to Odroid_go hardware. - **tasmota32-core2.bin** = The Core2 version is specifically tailored to M5Stack Core2 hardware. The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota32/release. The links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin`` [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v9.3.1.4 ### Added - Command ``Sensor80 1 <0..7>`` to control MFRC522 RFID antenna gain from 18dB (0) to 48dB (7) [#11073](https://github.com/arendst/Tasmota/issues/11073) - Command ``SerialBuffer 256..520`` to change hardware serial receive buffer size from default (256) to max local buffer size (520) [#11448](https://github.com/arendst/Tasmota/issues/11448) - Command ``SetOption126 1`` to enable DS18x20 arithmetic mean over teleperiod for JSON temperature based on [#11472](https://github.com/arendst/Tasmota/issues/11472) - Command ``Backlog0`` to allow execution of following commands without delay - Command ``TuyaTempSetRes 0..3`` to control Tuya Temperature Set Resolution [#11781](https://github.com/arendst/Tasmota/issues/11781) - Commands ``MqttKeepAlive 1..100`` to set Mqtt Keep Alive timer (default 30) and ``MqttTimeout 1..100`` to set Mqtt Socket Timeout (default 4) [#5341](https://github.com/arendst/Tasmota/issues/5341) - Commands ``DisplayType`` to select sub-modules where implemented and ``DisplayInvert`` to select inverted display where implemented - Support for SML VBUS [#11125](https://github.com/arendst/Tasmota/issues/11125) - Support for NEC and OPTOMA LCD/DLP Projector serial power control by Jan Bubík [#11145](https://github.com/arendst/Tasmota/issues/11145) - Support for XPT2046 touch screen digitizer on ILI9341 display by nonix [#11159](https://github.com/arendst/Tasmota/issues/11159) - Support for zigbee lumi.sensor_wleak [#11200](https://github.com/arendst/Tasmota/issues/11200) - Support for dummy energy monitor using user values set by commands ``VoltageSet``, ``CurrentSet``, ``PowerSet`` and ``FrequencySet``. Enable by selecting any GPIO as ``Option A2`` [#10640](https://github.com/arendst/Tasmota/issues/10640) - Support for CSE7761 energy monitor as used in ESP32 based Sonoff Dual R3 Pow [#10793](https://github.com/arendst/Tasmota/issues/10793) - Support for Frequency monitoring and zero-cross detection on CSE7761 (Sonoff Dual R3) - Support for TM1638 seven segment display by Ajith Vasudevan [#11031](https://github.com/arendst/Tasmota/issues/11031) - Support for MAX7219 seven segment display by Ajith Vasudevan [#11387](https://github.com/arendst/Tasmota/issues/11387) - Support for MPU6886 on primary or secondary I2C bus - Support for multiple CCS811 sensors with baseline control (USE_CCS811_V2) by clanganke [#10858](https://github.com/arendst/Tasmota/issues/10858) - Allow MCP230xx pinmode from output to input [#11104](https://github.com/arendst/Tasmota/issues/11104) - Berry improvements [#11163](https://github.com/arendst/Tasmota/issues/11163) - Extent compile time SetOptions support [#11204](https://github.com/arendst/Tasmota/issues/11204) - Tasmota discovery as alternative to Home Assistant discovery using define ``USE_TASMOTA_DISCOVERY`` - Optional GUI file editor enabled with define ``GUI_EDIT_FILE`` by barbudor [#11668](https://github.com/arendst/Tasmota/issues/11668) - Initial support for universal display driver UDisplay by Gerhard Mutz. Enable by selecting any GPIO as ``Option A3`` [#11665](https://github.com/arendst/Tasmota/issues/11665) - ESP32 Extent BLE [#11212](https://github.com/arendst/Tasmota/issues/11212) - ESP32 support for WS2812 hardware driver via RMT or I2S - ESP32 support for secondary I2C controller - ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only - ESP32 support for LVGL 7.11 with Berry binding by Stephan Hadinger [#11789](https://github.com/arendst/Tasmota/issues/11789) ### Breaking Changed - ESP32 partition layout changed to accomodate more file space on most and more code space on core2 and odroid-go [#11746](https://github.com/arendst/Tasmota/issues/11746) ### Changed - TasmotaSerial library from v3.2.0 to v3.3.0 - PubSubClient library from EspEasy v2.7.12 to Tasmota v2.8.12 - IRremoteESP8266 library from v2.7.15 to v2.7.16 - ESP32 core library from v1.0.5-rc6 to v1.0.6 - TuyaMcu dimmer timeout [#11121](https://github.com/arendst/Tasmota/issues/11121) - Rename epaper 42 commands [#11222](https://github.com/arendst/Tasmota/issues/11222) - DeepSleep announcement topic [#11223](https://github.com/arendst/Tasmota/issues/11223) - Limit number of relay/button columns in GUI to 8 [#11546](https://github.com/arendst/Tasmota/issues/11546) - ADC range result from int to float using command ``FreqRes`` for decimal resolution selection [#11545](https://github.com/arendst/Tasmota/issues/11545) - Removed overtemp detection on external energy monitoring devices [#11628](https://github.com/arendst/Tasmota/issues/11628) - Redesigned initial GUI wifi configuration by Adrian Scillato [#11693](https://github.com/arendst/Tasmota/issues/11693) - Redesigned GUI by moving non-configuration buttons from ``Configuration`` to new submenu ``Consoles`` - In tasmota-sensors.bin enabled support for VL53L0X and disabled TSL2561 [#11711](https://github.com/arendst/Tasmota/issues/11711) - Add HLW8012/BL0937 average pulse calculation by Alex Lovett [#11722](https://github.com/arendst/Tasmota/issues/11722) ### Fixed - PN532 on ESP32 Serial flush both Tx and Rx buffers [#10910](https://github.com/arendst/Tasmota/issues/10910) - Light scheme related color changes [#11041](https://github.com/arendst/Tasmota/issues/11041) - Refactor acceleration function for shutter stepper and servo [#11088](https://github.com/arendst/Tasmota/issues/11088) - LM75AD detection on different addresses [#11096](https://github.com/arendst/Tasmota/issues/11096) - Timer loop when console is scrolled up regression from v9.3.0 [#11108](https://github.com/arendst/Tasmota/issues/11108) - Display exception when no file system is present [#11125](https://github.com/arendst/Tasmota/issues/11125) - Scripter and SML fixes [#11150](https://github.com/arendst/Tasmota/issues/11150) - Zigbee exception when bad frame is received [#11192](https://github.com/arendst/Tasmota/issues/11192) - ESP32 flash script for Odroid and Core2 [#11227](https://github.com/arendst/Tasmota/issues/11227) - ESP32 WS2812 bitbang support [#11248](https://github.com/arendst/Tasmota/issues/11248) - DS18x20 driver timing issue [#11270](https://github.com/arendst/Tasmota/issues/11270) - Alexa discovery in hue emulation [#11415](https://github.com/arendst/Tasmota/issues/11415) - HC-SR04 on ESP32 release serial interface if not used [#11507](https://github.com/arendst/Tasmota/issues/11507) - Alexa discovery for ZBBridge [#11576](https://github.com/arendst/Tasmota/issues/11576) - Telegram chat id incorrect size [#11660](https://github.com/arendst/Tasmota/issues/11660) - KNX energy yesterday [#11718](https://github.com/arendst/Tasmota/issues/11718)