/*
support_esp.ino - ESP specific code for Tasmota
Copyright (C) 2021 Theo Arends / Jörg Schüler-Maroldt
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
/*********************************************************************************************\
* ESP8266 and ESP32 specific code
*
* At the end the common Tasmota calls are provided
\*********************************************************************************************/
/*********************************************************************************************\
* ESP8266 Support
\*********************************************************************************************/
#ifdef ESP8266
extern "C" {
extern struct rst_info resetInfo;
}
/*********************************************************************************************\
* Core overrides executed by core
\*********************************************************************************************/
// Add below line to tasmota_globals.h
// extern "C" void resetPins();
//
// This function overrules __resetPins() which is executed by core init() as initPins() in core_esp8266_wiring.cpp
//
// 20221229 - (v12.3.1.2) Enabled with additional check to execute on power on only to fix relay clicks on power on
// 20200321 - (v8.2.0.1) Disable core functionality to fix relay clicks on restart after OTA - make function return without setting pinMode
void resetPins() {
if ((resetInfo.reason == REASON_DEFAULT_RST) || (resetInfo.reason == REASON_EXT_SYS_RST)) {
// Only perform at power on
for (int i = 0; i <= 5; ++i) {
pinMode(i, INPUT);
}
// pins 6-11 are used for the SPI flash interface ESP8266
for (int i = 12; i <= 16; ++i) {
pinMode(i, INPUT);
}
}
}
/*********************************************************************************************\
* Hardware related
\*********************************************************************************************/
void HwWdtDisable(void) {
*((volatile uint32_t*) 0x60000900) &= ~(1); // Hardware WDT OFF
}
void HwWdtEnable(void) {
*((volatile uint32_t*) 0x60000900) |= 1; // Hardware WDT ON
}
void WdtDisable(void) {
ESP.wdtDisable();
HwWdtDisable();
}
void WdtEnable(void) {
HwWdtEnable();
ESP.wdtEnable(0);
}
/*********************************************************************************************\
* ESP8266 specifics
\*********************************************************************************************/
uint32_t ESP_ResetInfoReason(void) {
return resetInfo.reason;
}
String ESP_getResetReason(void) {
return ESP.getResetReason();
}
uint32_t ESP_getChipId(void) {
return ESP.getChipId();
}
uint32_t ESP_getFreeSketchSpace(void) {
return ESP.getFreeSketchSpace();
}
uint32_t ESP_getSketchSize(void) {
return ESP.getSketchSize();
}
uint32_t ESP_getFreeHeap(void) {
return ESP.getFreeHeap();
}
uint32_t ESP_getFlashChipId(void) {
return ESP.getFlashChipId();
}
uint32_t ESP_getFlashChipRealSize(void) {
return ESP.getFlashChipRealSize();
}
uint32_t ESP_getFlashChipSize(void) {
return ESP.getFlashChipSize();
}
void ESP_Restart(void) {
// ESP.restart(); // This results in exception 3 on restarts on core 2.3.0
ESP.reset();
}
uint32_t FlashWriteStartSector(void) {
return (ESP.getSketchSize() / SPI_FLASH_SEC_SIZE) + 2; // Stay on the safe side
}
uint32_t FlashWriteMaxSector(void) {
return (((uint32_t)&_FS_start - 0x40200000) / SPI_FLASH_SEC_SIZE) - 2;
}
uint8_t* FlashDirectAccess(void) {
return (uint8_t*)(0x40200000 + (FlashWriteStartSector() * SPI_FLASH_SEC_SIZE));
}
void *special_malloc(uint32_t size) {
return malloc(size);
}
void *special_realloc(void *ptr, size_t size) {
return realloc(ptr, size);
}
void *special_calloc(size_t num, size_t size) {
return calloc(num, size);
}
String GetDeviceHardware(void) {
/*
ESP8266 SoCs
- 32-bit MCU & 2.4 GHz Wi-Fi
- High-performance 160 MHz single-core CPU
- +19.5 dBm output power ensures a good physical range
- Sleep current is less than 20 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include UART, GPIO, I2C, I2S, SDIO, PWM, ADC and SPI
*/
// esptool.py get_efuses
uint32_t efuse0 = *(uint32_t*)(0x3FF00050);
// uint32_t efuse1 = *(uint32_t*)(0x3FF00054);
uint32_t efuse2 = *(uint32_t*)(0x3FF00058);
uint32_t efuse3 = *(uint32_t*)(0x3FF0005C);
bool r0_4 = efuse0 & (1 << 4); // ESP8285
bool r2_16 = efuse2 & (1 << 16); // ESP8285
if (r0_4 || r2_16) { // ESP8285
// 1M 2M 2M 4M flash size
// r0_4 1 1 0 0
bool r3_25 = efuse3 & (1 << 25); // flash matrix 0 0 1 1
bool r3_26 = efuse3 & (1 << 26); // flash matrix 0 1 0 1
bool r3_27 = efuse3 & (1 << 27); // flash matrix 0 0 0 0
uint32_t pkg_version = 0;
if (!r3_27) {
if (r0_4 && !r3_25) {
pkg_version = (r3_26) ? 2 : 1;
}
else if (!r0_4 && r3_25) {
pkg_version = (r3_26) ? 4 : 2;
}
}
bool max_temp = efuse0 & (1 << 5); // Max flash temperature (0 = 85C, 1 = 105C)
switch (pkg_version) {
case 1:
if (max_temp) { return F("ESP8285H08"); } // 1M flash
else { return F("ESP8285N08"); }
case 2:
if (max_temp) { return F("ESP8285H16"); } // 2M flash
else { return F("ESP8285N16"); }
case 4:
if (max_temp) { return F("ESP8285H32"); } // 4M flash
else { return F("ESP8285N32"); }
}
return F("ESP8285");
}
return F("ESP8266EX");
}
String GetDeviceHardwareRevision(void) {
// No known revisions for ESP8266/85
return GetDeviceHardware();
}
String GetCodeCores(void) {
return F("");
}
#endif
/*********************************************************************************************\
* ESP32 Support
\*********************************************************************************************/
#ifdef ESP32
#include "bootloader_flash.h"
#include "soc/soc.h"
#include "soc/spi_reg.h"
// ESP32_ARCH contains the name of the architecture (used by autoconf)
#if CONFIG_IDF_TARGET_ESP32
#ifdef CORE32SOLO1
#define ESP32_ARCH "esp32solo1"
#else
#define ESP32_ARCH "esp32"
#endif
#elif CONFIG_IDF_TARGET_ESP32S2
#define ESP32_ARCH "esp32s2"
#elif CONFIG_IDF_TARGET_ESP32S3
#define ESP32_ARCH "esp32s3"
#elif CONFIG_IDF_TARGET_ESP32C3
#define ESP32_ARCH "esp32c3"
#else
#define ESP32_ARCH ""
#endif
// Handle 20k of NVM
#include
// See libraries\ESP32\examples\ResetReason.ino
#if ESP_IDF_VERSION_MAJOR > 3 // IDF 4+
#if CONFIG_IDF_TARGET_ESP32 // ESP32/PICO-D4
#include "esp32/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32S2 // ESP32-S2
#include "esp32s2/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32S3 // ESP32-S3
#include "esp32s3/rom/rtc.h"
#elif CONFIG_IDF_TARGET_ESP32C3 // ESP32-C3
#include "esp32c3/rom/rtc.h"
#else
#error Target CONFIG_IDF_TARGET is not supported
#endif
#else // ESP32 Before IDF 4.0
#include "rom/rtc.h"
#endif
// Set the Stacksize for Arduino core. Default is 8192, some builds may need a bigger one
size_t getArduinoLoopTaskStackSize(void) {
return SET_ESP32_STACK_SIZE;
}
#include
bool NvmLoad(const char *sNvsName, const char *sName, void *pSettings, unsigned nSettingsLen) {
nvs_handle_t handle;
esp_err_t result = nvs_open(sNvsName, NVS_READONLY, &handle);
if (result != ESP_OK) {
AddLog(LOG_LEVEL_DEBUG, PSTR("NVS: Error %d"), result);
return false;
}
size_t size = nSettingsLen;
nvs_get_blob(handle, sName, pSettings, &size);
nvs_close(handle);
return true;
}
void NvmSave(const char *sNvsName, const char *sName, const void *pSettings, unsigned nSettingsLen) {
#ifdef USE_WEBCAM
WcInterrupt(0); // Stop stream if active to fix TG1WDT_SYS_RESET
#endif
nvs_handle_t handle;
esp_err_t result = nvs_open(sNvsName, NVS_READWRITE, &handle);
if (result != ESP_OK) {
AddLog(LOG_LEVEL_DEBUG, PSTR("NVS: Error %d"), result);
} else {
nvs_set_blob(handle, sName, pSettings, nSettingsLen);
nvs_commit(handle);
nvs_close(handle);
}
#ifdef USE_WEBCAM
WcInterrupt(1);
#endif
}
int32_t NvmErase(const char *sNvsName) {
nvs_handle_t handle;
int32_t result = nvs_open(sNvsName, NVS_READWRITE, &handle);
if (ESP_OK == result) { result = nvs_erase_all(handle); }
if (ESP_OK == result) { result = nvs_commit(handle); }
nvs_close(handle);
return result;
}
void SettingsErase(uint8_t type) {
// SDK and Tasmota data is held in default NVS partition
// Tasmota data is held also in file /.settings on default filesystem
// cal_data - SDK PHY calibration data as documented in esp_phy_init.h
// qpc - Tasmota Quick Power Cycle state
// main - Tasmota Settings data
int32_t r1, r2, r3 = 0;
switch (type) {
case 0: // Reset 2 = Erase all flash from program end to end of physical flash
case 2: // Reset 5, 6 = Erase all flash from program end to end of physical flash excluding filesystem
// nvs_flash_erase(); // Erase RTC, PHY, sta.mac, ap.sndchan, ap.mac, Tasmota etc.
r1 = NvmErase("qpc");
r2 = NvmErase("main");
#ifdef USE_UFILESYS
r3 = TfsDeleteFile(TASM_FILE_SETTINGS);
#endif
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_ERASE " Tasmota data (%d,%d,%d)"), r1, r2, r3);
break;
case 1: // Reset 3 = SDK parameter area
case 4: // WIFI_FORCE_RF_CAL_ERASE = SDK parameter area
r1 = esp_phy_erase_cal_data_in_nvs();
// r1 = NvmErase("cal_data");
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_ERASE " PHY data (%d)"), r1);
break;
case 3: // QPC Reached = QPC, Tasmota and SDK parameter area (0x0F3xxx - 0x0FFFFF)
// nvs_flash_erase(); // Erase RTC, PHY, sta.mac, ap.sndchan, ap.mac, Tasmota etc.
r1 = NvmErase("qpc");
r2 = NvmErase("main");
// r3 = esp_phy_erase_cal_data_in_nvs();
// r3 = NvmErase("cal_data");
// AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_ERASE " Tasmota (%d,%d) and PHY data (%d)"), r1, r2, r3);
#ifdef USE_UFILESYS
r3 = TfsDeleteFile(TASM_FILE_SETTINGS);
#endif
AddLog(LOG_LEVEL_DEBUG, PSTR(D_LOG_APPLICATION D_ERASE " Tasmota data (%d,%d,%d)"), r1, r2, r3);
break;
}
}
uint32_t SettingsRead(void *data, size_t size) {
#ifdef USE_UFILESYS
if (TfsLoadFile(TASM_FILE_SETTINGS, (uint8_t*)data, size)) {
return 2;
}
#endif
if (NvmLoad("main", "Settings", data, size)) {
return 1;
};
return 0;
}
void SettingsWrite(const void *pSettings, unsigned nSettingsLen) {
#ifdef USE_UFILESYS
TfsSaveFile(TASM_FILE_SETTINGS, (const uint8_t*)pSettings, nSettingsLen);
#endif
NvmSave("main", "Settings", pSettings, nSettingsLen);
}
void QPCRead(void *pSettings, unsigned nSettingsLen) {
NvmLoad("qpc", "pcreg", pSettings, nSettingsLen);
}
void QPCWrite(const void *pSettings, unsigned nSettingsLen) {
NvmSave("qpc", "pcreg", pSettings, nSettingsLen);
}
bool OtaFactoryRead(void) {
uint32_t pOtaLoader;
NvmLoad("otal", "otal", &pOtaLoader, sizeof(pOtaLoader));
return pOtaLoader;
}
void OtaFactoryWrite(bool value) {
uint32_t pOtaLoader = value;
NvmSave("otal", "otal", &pOtaLoader, sizeof(pOtaLoader));
}
void NvsInfo(void) {
nvs_stats_t nvs_stats;
nvs_get_stats(NULL, &nvs_stats);
AddLog(LOG_LEVEL_INFO, PSTR("NVS: Used %d/%d entries, NameSpaces %d"),
nvs_stats.used_entries, nvs_stats.total_entries, nvs_stats.namespace_count);
}
//
// Flash memory mapping
//
// See Esp.cpp
#include "Esp.h"
#include "esp_spi_flash.h"
#include
#include
#include
#include
extern "C" {
#include "esp_ota_ops.h"
#include "esp_image_format.h"
}
#include "esp_system.h"
#if ESP_IDF_VERSION_MAJOR > 3 // IDF 4+
#if CONFIG_IDF_TARGET_ESP32 // ESP32/PICO-D4
#include "esp32/rom/spi_flash.h"
#define ESP_FLASH_IMAGE_BASE 0x1000 // Flash offset containing magic flash size and spi mode
#elif CONFIG_IDF_TARGET_ESP32S2 // ESP32-S2
#include "esp32s2/rom/spi_flash.h"
#define ESP_FLASH_IMAGE_BASE 0x1000 // Flash offset containing magic flash size and spi mode
#elif CONFIG_IDF_TARGET_ESP32S3 // ESP32-S3
#include "esp32s3/rom/spi_flash.h"
#define ESP_FLASH_IMAGE_BASE 0x0000 // Esp32s3 is located at 0x0000
#elif CONFIG_IDF_TARGET_ESP32C3 // ESP32-C3
#include "esp32c3/rom/spi_flash.h"
#define ESP_FLASH_IMAGE_BASE 0x0000 // Esp32c3 is located at 0x0000
#else
#error Target CONFIG_IDF_TARGET is not supported
#endif
#else // ESP32 Before IDF 4.0
#include "rom/spi_flash.h"
#define ESP_FLASH_IMAGE_BASE 0x1000
#endif
uint32_t EspProgramSize(const char *label) {
const esp_partition_t *part = esp_partition_find_first(ESP_PARTITION_TYPE_APP, ESP_PARTITION_SUBTYPE_ANY, label);
if (!part) {
return 0;
}
const esp_partition_pos_t part_pos = {
.offset = part->address,
.size = part->size,
};
esp_image_metadata_t data;
data.start_addr = part_pos.offset;
esp_image_verify(ESP_IMAGE_VERIFY, &part_pos, &data);
return data.image_len;
}
bool EspSingleOtaPartition(void) {
return (1 == esp_ota_get_app_partition_count());
}
uint32_t EspRunningFactoryPartition(void) {
const esp_partition_t *cur_part = esp_ota_get_running_partition();
// return (cur_part->type == 0 && cur_part->subtype == 0);
if (cur_part->type == 0 && cur_part->subtype == 0) {
return cur_part->size;
}
return 0;
}
void EspPrepRestartToSafeBoot(void) {
const esp_partition_t *otadata_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_OTA, NULL);
if (otadata_partition) {
esp_partition_erase_range(otadata_partition, 0, SPI_FLASH_SEC_SIZE * 2);
}
}
bool EspPrepSwitchPartition(uint32_t state) {
bool valid = EspSingleOtaPartition();
if (valid) {
bool running_factory = EspRunningFactoryPartition();
switch (state) {
case 0: // Off = safeboot
if (!running_factory) {
EspPrepRestartToSafeBoot();
} else {
valid = false;
}
break;
case 1: // On = ota0
if (running_factory) {
const esp_partition_t* partition = esp_ota_get_next_update_partition(nullptr);
esp_ota_set_boot_partition(partition);
} else {
valid = false;
}
break;
case 2: // Toggle
if (!running_factory) {
EspPrepRestartToSafeBoot();
} else {
const esp_partition_t* partition = esp_ota_get_next_update_partition(nullptr);
esp_ota_set_boot_partition(partition);
}
}
}
return valid;
}
uint32_t EspFlashBaseAddress(void) {
if (EspSingleOtaPartition()) { // Only one partition so start at end of sketch
const esp_partition_t *running = esp_ota_get_running_partition();
if (!running) { return 0; }
return running->address + ESP_getSketchSize();
} else { // Select other partition
const esp_partition_t* partition = esp_ota_get_next_update_partition(nullptr);
if (!partition) { return 0; }
return partition->address; // For tasmota 0x00010000 or 0x00200000
}
}
uint32_t EspFlashBaseEndAddress(void) {
const esp_partition_t* partition = (EspSingleOtaPartition()) ? esp_ota_get_running_partition() : esp_ota_get_next_update_partition(nullptr);
if (!partition) { return 0; }
return partition->address + partition->size; // For tasmota 0x00200000 or 0x003F0000
}
uint8_t* EspFlashMmap(uint32_t address) {
static spi_flash_mmap_handle_t handle = 0;
if (handle) {
spi_flash_munmap(handle);
handle = 0;
}
const uint8_t* data;
int32_t err = spi_flash_mmap(address, 5 * SPI_FLASH_MMU_PAGE_SIZE, SPI_FLASH_MMAP_DATA, (const void **)&data, &handle);
/*
AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: Spi_flash_map %d"), err);
spi_flash_mmap_dump();
*/
return (uint8_t*)data;
}
/*
int32_t EspPartitionMmap(uint32_t action) {
static spi_flash_mmap_handle_t handle;
int32_t err = 0;
if (1 == action) {
const esp_partition_t *partition = esp_ota_get_running_partition();
// const esp_partition_t* partition = esp_ota_get_next_update_partition(nullptr);
if (!partition) { return 0; }
err = esp_partition_mmap(partition, 0, 4 * SPI_FLASH_MMU_PAGE_SIZE, SPI_FLASH_MMAP_DATA, (const void **)&TasmotaGlobal_mmap_data, &handle);
AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: Partition start 0x%08X, Partition end 0x%08X, Mmap data 0x%08X"), partition->address, partition->size, TasmotaGlobal_mmap_data);
} else {
spi_flash_munmap(handle);
handle = 0;
}
return err;
}
*/
//
// ESP32 specific
//
#include "soc/soc.h"
#include "soc/rtc_cntl_reg.h"
void DisableBrownout(void) {
// https://github.com/espressif/arduino-esp32/issues/863#issuecomment-347179737
WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); // Disable brownout detector
}
//
// ESP32 Alternatives
//
String ESP32GetResetReason(uint32_t cpu_no) {
// tools\sdk\include\esp32\rom\rtc.h
// tools\sdk\esp32\include\esp_rom\include\esp32c3\rom\rtc.h
// tools\sdk\esp32\include\esp_rom\include\esp32s2\rom\rtc.h
switch (rtc_get_reset_reason(cpu_no)) { // ESP32 ESP32-S / ESP32-C
case 1 : return F("Vbat power on reset"); // 1 POWERON_RESET POWERON_RESET
case 3 : return F("Software reset digital core"); // 3 SW_RESET RTC_SW_SYS_RESET
case 4 : return F("Legacy watch dog reset digital core"); // 4 OWDT_RESET -
case 5 : return F("Deep Sleep reset digital core"); // 5 DEEPSLEEP_RESET DEEPSLEEP_RESET
case 6 : return F("Reset by SLC module, reset digital core"); // 6 SDIO_RESET
case 7 : return F("Timer Group0 Watch dog reset digital core"); // 7 TG0WDT_SYS_RESET
case 8 : return F("Timer Group1 Watch dog reset digital core"); // 8 TG1WDT_SYS_RESET
case 9 : return F("RTC Watch dog Reset digital core"); // 9 RTCWDT_SYS_RESET
case 10 : return F("Instrusion tested to reset CPU"); // 10 INTRUSION_RESET
case 11 : return F("Time Group0 reset CPU"); // 11 TGWDT_CPU_RESET TG0WDT_CPU_RESET
case 12 : return F("Software reset CPU"); // 12 SW_CPU_RESET RTC_SW_CPU_RESET
case 13 : return F("RTC Watch dog Reset CPU"); // 13 RTCWDT_CPU_RESET
case 14 : return F("or APP CPU, reseted by PRO CPU"); // 14 EXT_CPU_RESET -
case 15 : return F("Reset when the vdd voltage is not stable"); // 15 RTCWDT_BROWN_OUT_RESET
case 16 : return F("RTC Watch dog reset digital core and rtc module"); // 16 RTCWDT_RTC_RESET
case 17 : return F("Time Group1 reset CPU"); // 17 - TG1WDT_CPU_RESET
case 18 : return F("Super watchdog reset digital core and rtc module"); // 18 - SUPER_WDT_RESET
case 19 : return F("Glitch reset digital core and rtc module"); // 19 - GLITCH_RTC_RESET
case 20 : return F("Efuse reset digital core"); // 20 EFUSE_RESET
case 21 : return F("Usb uart reset digital core"); // 21 USB_UART_CHIP_RESET
case 22 : return F("Usb jtag reset digital core"); // 22 USB_JTAG_CHIP_RESET
case 23 : return F("Power glitch reset digital core and rtc module"); // 23 POWER_GLITCH_RESET
}
return F("No meaning"); // 0 and undefined
}
String ESP_getResetReason(void) {
return ESP32GetResetReason(0); // CPU 0
}
uint32_t ESP_ResetInfoReason(void) {
RESET_REASON reason = rtc_get_reset_reason(0);
if (1 == reason) { return REASON_DEFAULT_RST; } // POWERON_RESET
if (12 == reason) { return REASON_SOFT_RESTART; } // SW_CPU_RESET / RTC_SW_CPU_RESET
if (5 == reason) { return REASON_DEEP_SLEEP_AWAKE; } // DEEPSLEEP_RESET
if (3 == reason) { return REASON_EXT_SYS_RST; } // SW_RESET / RTC_SW_SYS_RESET
return -1; //no "official error code", but should work with the current code base
}
uint32_t ESP_getChipId(void) {
uint32_t id = 0;
for (uint32_t i = 0; i < 17; i = i +8) {
id |= ((ESP.getEfuseMac() >> (40 - i)) & 0xff) << i;
}
return id;
}
uint32_t ESP_getFlashChipMagicSize(void)
{
esp_image_header_t fhdr;
if(ESP.flashRead(ESP_FLASH_IMAGE_BASE, (uint32_t*)&fhdr, sizeof(esp_image_header_t)) && fhdr.magic != ESP_IMAGE_HEADER_MAGIC) {
return 0;
}
return ESP_magicFlashChipSize(fhdr.spi_size);
}
uint32_t ESP_magicFlashChipSize(uint8_t byte)
{
switch(byte & 0x0F) {
case 0x0: // 8 MBit (1MB)
return 1048576;
case 0x1: // 16 MBit (2MB)
return 2097152;
case 0x2: // 32 MBit (4MB)
return 4194304;
case 0x3: // 64 MBit (8MB)
return 8388608;
case 0x4: // 128 MBit (16MB)
return 16777216;
default: // fail?
return 0;
}
}
uint32_t ESP_getSketchSize(void) {
static uint32_t sketchsize = 0;
if (!sketchsize) {
sketchsize = ESP.getSketchSize(); // This takes almost 2 seconds on an ESP32
}
return sketchsize;
}
uint32_t ESP_getFreeSketchSpace(void) {
if (EspSingleOtaPartition()) {
uint32_t size = EspRunningFactoryPartition();
if (!size) {
size = ESP.getFreeSketchSpace();
}
return size - ESP_getSketchSize();
}
return ESP.getFreeSketchSpace();
}
uint32_t ESP_getFreeHeap(void) {
// ESP_getFreeHeap() returns also IRAM which we don't use
return heap_caps_get_free_size(MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT);
}
uint32_t ESP_getMaxAllocHeap(void) {
// arduino returns IRAM but we want only DRAM
#ifdef USE_GT911 // GT911 IRQ crashes with heap_caps_get_largest_free_block
return ESP_getFreeHeap();
#endif
uint32_t free_block_size = heap_caps_get_largest_free_block(MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT);
if (free_block_size > 100) { free_block_size -= 100; }
return free_block_size;
}
int32_t ESP_getHeapFragmentation(void) {
int32_t free_maxmem = 100 - (int32_t)(ESP_getMaxAllocHeap() * 100 / ESP_getFreeHeap());
if (free_maxmem < 0) { free_maxmem = 0; }
return free_maxmem;
}
void ESP_Restart(void) {
ESP.restart();
}
uint32_t FlashWriteStartSector(void) {
// Needs to be on SPI_FLASH_MMU_PAGE_SIZE (= 0x10000) alignment for mmap usage
uint32_t aligned_address = ((EspFlashBaseAddress() + (2 * SPI_FLASH_MMU_PAGE_SIZE)) / SPI_FLASH_MMU_PAGE_SIZE) * SPI_FLASH_MMU_PAGE_SIZE;
return aligned_address / SPI_FLASH_SEC_SIZE;
}
uint32_t FlashWriteMaxSector(void) {
// Needs to be on SPI_FLASH_MMU_PAGE_SIZE (= 0x10000) alignment for mmap usage
uint32_t aligned_end_address = (EspFlashBaseEndAddress() / SPI_FLASH_MMU_PAGE_SIZE) * SPI_FLASH_MMU_PAGE_SIZE;
return aligned_end_address / SPI_FLASH_SEC_SIZE;
}
uint8_t* FlashDirectAccess(void) {
uint32_t address = FlashWriteStartSector() * SPI_FLASH_SEC_SIZE;
uint8_t* data = EspFlashMmap(address);
/*
uint8_t buf[32];
memcpy(buf, data, sizeof(buf));
AddLog(LOG_LEVEL_DEBUG, PSTR("DBG: Flash start address 0x%08X, Mmap address 0x%08X, Data %*_H"), address, data, sizeof(buf), (uint8_t*)&buf);
*/
return data;
}
extern "C" {
bool esp_spiram_is_initialized(void);
}
// this function is a replacement for `psramFound()`.
// `psramFound()` can return true even if no PSRAM is actually installed
// This new version also checks `esp_spiram_is_initialized` to know if the PSRAM is initialized
bool FoundPSRAM(void) {
#if CONFIG_IDF_TARGET_ESP32C3
return psramFound();
#else
return psramFound() && esp_spiram_is_initialized();
#endif
}
// new function to check whether PSRAM is present and supported (i.e. required pacthes are present)
bool UsePSRAM(void) {
static bool can_use_psram = CanUsePSRAM();
return FoundPSRAM() && can_use_psram;
}
void *special_malloc(uint32_t size) {
if (UsePSRAM()) {
return heap_caps_malloc(size, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
} else {
return malloc(size);
}
}
void *special_realloc(void *ptr, size_t size) {
if (UsePSRAM()) {
return heap_caps_realloc(ptr, size, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
} else {
return realloc(ptr, size);
}
}
void *special_calloc(size_t num, size_t size) {
if (UsePSRAM()) {
return heap_caps_calloc(num, size, MALLOC_CAP_SPIRAM | MALLOC_CAP_8BIT);
} else {
return calloc(num, size);
}
}
// Variants for IRAM heap, which need all accesses to be 32 bits aligned
void *special_malloc32(uint32_t size) {
return heap_caps_malloc(size, MALLOC_CAP_32BIT);
}
float CpuTemperature(void) {
return (float)temperatureRead(); // In Celsius
}
/*
#ifdef __cplusplus
extern "C" {
#endif
uint8_t temprature_sens_read();
#ifdef __cplusplus
}
#endif
#ifdef CONFIG_IDF_TARGET_ESP32
uint8_t temprature_sens_read();
float CpuTemperature(void) {
uint8_t t = temprature_sens_read();
AddLog(LOG_LEVEL_DEBUG, PSTR("TMP: value %d"), t);
return (t - 32) / 1.8;
}
#else
float CpuTemperature(void) {
// Currently (20210801) repeated calls to temperatureRead() on ESP32C3 and ESP32S2 result in IDF error messages
static float t = NAN;
if (isnan(t)) {
t = (float)temperatureRead(); // In Celsius
}
return t;
}
#endif
*/
/*
#if CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/esp_efuse.h"
#elif CONFIG_IDF_TARGET_ESP32S3
#include "esp32s3/esp_efuse.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/esp_efuse.h"
#endif
*/
// #include "esp_chip_info.h"
String GetDeviceHardware(void) {
// https://www.espressif.com/en/products/socs
/*
Source: esp-idf esp_system.h and esptool
typedef enum {
CHIP_ESP32 = 1, //!< ESP32
CHIP_ESP32S2 = 2, //!< ESP32-S2
CHIP_ESP32S3 = 9, //!< ESP32-S3
CHIP_ESP32C3 = 5, //!< ESP32-C3
CHIP_ESP32H2 = 6, //!< ESP32-H2
CHIP_ESP32C2 = 12, //!< ESP32-C2
} esp_chip_model_t;
// Chip feature flags, used in esp_chip_info_t
#define CHIP_FEATURE_EMB_FLASH BIT(0) //!< Chip has embedded flash memory
#define CHIP_FEATURE_WIFI_BGN BIT(1) //!< Chip has 2.4GHz WiFi
#define CHIP_FEATURE_BLE BIT(4) //!< Chip has Bluetooth LE
#define CHIP_FEATURE_BT BIT(5) //!< Chip has Bluetooth Classic
#define CHIP_FEATURE_IEEE802154 BIT(6) //!< Chip has IEEE 802.15.4
#define CHIP_FEATURE_EMB_PSRAM BIT(7) //!< Chip has embedded psram
// The structure represents information about the chip
typedef struct {
esp_chip_model_t model; //!< chip model, one of esp_chip_model_t
uint32_t features; //!< bit mask of CHIP_FEATURE_x feature flags
uint8_t cores; //!< number of CPU cores
uint8_t revision; //!< chip revision number
} esp_chip_info_t;
*/
esp_chip_info_t chip_info;
esp_chip_info(&chip_info);
uint32_t chip_model = chip_info.model;
uint32_t chip_revision = chip_info.revision;
// uint32_t chip_revision = ESP.getChipRevision();
bool rev3 = (3 == chip_revision);
// bool single_core = (1 == ESP.getChipCores());
bool single_core = (1 == chip_info.cores);
if (chip_model < 2) { // ESP32
/*
ESP32 Series
- 32-bit MCU & 2.4 GHz Wi-Fi & Bluetooth/Bluetooth LE
- Two or one CPU core(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
- +19.5 dBm output power ensures a good physical range
- Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK) and AVRCP (CT)
- Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
- Bluetooth Low Energy (Bluetooth LE) connects to smart phones, broadcasting low-energy beacons for easy detection
- Sleep current is less than 5 μA, making it suitable for battery-powered and wearable-electronics applications
- Peripherals include capacitive touch sensors, Hall sensor, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
*/
#ifdef CONFIG_IDF_TARGET_ESP32
/* esptool:
def get_pkg_version(self):
word3 = self.read_efuse(3)
pkg_version = (word3 >> 9) & 0x07
pkg_version += ((word3 >> 2) & 0x1) << 3
return pkg_version
*/
uint32_t chip_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_PKG);
uint32_t pkg_version = chip_ver & 0x7;
// AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("HDW: ESP32 Model %d, Revision %d, Core %d, Package %d"), chip_info.model, chip_revision, chip_info.cores, chip_ver);
switch (pkg_version) {
case 0:
if (single_core) { return F("ESP32-S0WDQ6"); } // Max 240MHz, Single core, QFN 6*6
else if (rev3) { return F("ESP32-D0WDQ6-V3"); } // Max 240MHz, Dual core, QFN 6*6
else { return F("ESP32-D0WDQ6"); } // Max 240MHz, Dual core, QFN 6*6
case 1:
if (single_core) { return F("ESP32-S0WD"); } // Max 160MHz, Single core, QFN 5*5, ESP32-SOLO-1, ESP32-DevKitC
else if (rev3) { return F("ESP32-D0WD-V3"); } // Max 240MHz, Dual core, QFN 5*5, ESP32-WROOM-32E, ESP32_WROVER-E, ESP32-DevKitC
else { return F("ESP32-D0WD"); } // Max 240MHz, Dual core, QFN 5*5, ESP32-WROOM-32D, ESP32_WROVER-B, ESP32-DevKitC
case 2: return F("ESP32-D2WD"); // Max 160MHz, Dual core, QFN 5*5, 2MB embedded flash
case 3:
if (single_core) { return F("ESP32-S0WD-OEM"); } // Max 160MHz, Single core, QFN 5*5, Xiaomi Yeelight
else { return F("ESP32-D0WD-OEM"); } // Max 240MHz, Dual core, QFN 5*5
case 4:
if (single_core) { return F("ESP32-U4WDH-S"); } // Max 160MHz, Single core, QFN 5*5, 4MB embedded flash, ESP32-MINI-1, ESP32-DevKitM-1
else { return F("ESP32-U4WDH-D"); } // Max 240MHz, Dual core, QFN 5*5, 4MB embedded flash
case 5:
if (rev3) { return F("ESP32-PICO-V3"); } // Max 240MHz, Dual core, LGA 7*7, ESP32-PICO-V3-ZERO, ESP32-PICO-V3-ZERO-DevKit
else { return F("ESP32-PICO-D4"); } // Max 240MHz, Dual core, LGA 7*7, 4MB embedded flash, ESP32-PICO-KIT
case 6: return F("ESP32-PICO-V3-02"); // Max 240MHz, Dual core, LGA 7*7, 8MB embedded flash, 2MB embedded PSRAM, ESP32-PICO-MINI-02, ESP32-PICO-DevKitM-2
case 7: return F("ESP32-D0WDR2-V3"); // Max 240MHz, Dual core, QFN 5*5, ESP32-WROOM-32E, ESP32_WROVER-E, ESP32-DevKitC
}
#endif // CONFIG_IDF_TARGET_ESP32
return F("ESP32");
}
else if (2 == chip_model) { // ESP32-S2
/*
ESP32-S2 Series
- 32-bit MCU & 2.4 GHz Wi-Fi
- High-performance 240 MHz single-core CPU
- Ultra-low-power performance: fine-grained clock gating, dynamic voltage and frequency scaling
- Security features: eFuse、flash encryption, secure boot, signature verification, integrated AES, SHA and RSA algorithms
- Peripherals include 43 GPIOs, 1 full-speed USB OTG interface, SPI, I2S, UART, I2C, LED PWM, LCD interface, camera interface, ADC, DAC, touch sensor, temperature sensor
- Availability of common cloud connectivity agents and common product features shortens the time to market
*/
#ifdef CONFIG_IDF_TARGET_ESP32S2
/* esptool:
def get_flash_version(self):
num_word = 3
block1_addr = self.EFUSE_BASE + 0x044
word3 = self.read_reg(block1_addr + (4 * num_word))
pkg_version = (word3 >> 21) & 0x0F
return pkg_version
def get_psram_version(self):
num_word = 3
block1_addr = self.EFUSE_BASE + 0x044
word3 = self.read_reg(block1_addr + (4 * num_word))
pkg_version = (word3 >> 28) & 0x0F
return pkg_version
*/
uint32_t chip_ver = REG_GET_FIELD(EFUSE_RD_MAC_SPI_SYS_3_REG, EFUSE_FLASH_VERSION);
uint32_t psram_ver = REG_GET_FIELD(EFUSE_RD_MAC_SPI_SYS_3_REG, EFUSE_PSRAM_VERSION);
uint32_t pkg_version = (chip_ver & 0xF) + ((psram_ver & 0xF) * 100);
// AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("HDW: ESP32 Model %d, Revision %d, Core %d, Package %d"), chip_info.model, chip_revision, chip_info.cores, chip_ver);
switch (pkg_version) {
case 0: return F("ESP32-S2"); // Max 240MHz, Single core, QFN 7*7, ESP32-S2-WROOM, ESP32-S2-WROVER, ESP32-S2-Saola-1, ESP32-S2-Kaluga-1
case 1: return F("ESP32-S2FH2"); // Max 240MHz, Single core, QFN 7*7, 2MB embedded flash, ESP32-S2-MINI-1, ESP32-S2-DevKitM-1
case 2: return F("ESP32-S2FH4"); // Max 240MHz, Single core, QFN 7*7, 4MB embedded flash
case 3: return F("ESP32-S2FN4R2"); // Max 240MHz, Single core, QFN 7*7, 4MB embedded flash, 2MB embedded PSRAM, , ESP32-S2-MINI-1U, ESP32-S2-DevKitM-1U
case 100: return F("ESP32-S2R2");
case 102: return F("ESP32-S2FNR2"); // Max 240MHz, Single core, QFN 7*7, 4MB embedded flash, 2MB embedded PSRAM, , Lolin S2 mini
}
#endif // CONFIG_IDF_TARGET_ESP32S2
return F("ESP32-S2");
}
else if (4 == chip_model) { // ESP32-S3(beta2)
return F("ESP32-S3");
}
else if (5 == chip_model) { // ESP32-C3 = ESP8685
/*
ESP32-C3 Series
- 32-bit RISC-V MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
- 32-bit RISC-V single-core processor with a four-stage pipeline that operates at up to 160 MHz
- State-of-the-art power and RF performance
- 400 KB of SRAM and 384 KB of ROM on the chip, and SPI, Dual SPI, Quad SPI, and QPI interfaces that allow connection to flash
- Reliable security features ensured by RSA-3072-based secure boot, AES-128-XTS-based flash encryption, the innovative digital signature and the HMAC peripheral, hardware acceleration support for cryptographic algorithms
- Rich set of peripheral interfaces and GPIOs, ideal for various scenarios and complex applications
*/
#ifdef CONFIG_IDF_TARGET_ESP32C3
/* esptool:
def get_pkg_version(self):
num_word = 3
block1_addr = self.EFUSE_BASE + 0x044
word3 = self.read_reg(block1_addr + (4 * num_word))
pkg_version = (word3 >> 21) & 0x0F
return pkg_version
*/
uint32_t chip_ver = REG_GET_FIELD(EFUSE_RD_MAC_SPI_SYS_3_REG, EFUSE_PKG_VERSION);
uint32_t pkg_version = chip_ver & 0x7;
// uint32_t pkg_version = esp_efuse_get_pkg_ver();
// AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("HDW: ESP32 Model %d, Revision %d, Core %d, Package %d"), chip_info.model, chip_revision, chip_info.cores, chip_ver);
switch (pkg_version) {
case 0: return F("ESP32-C3"); // Max 160MHz, Single core, QFN 5*5, ESP32-C3-WROOM-02, ESP32-C3-DevKitC-02
case 1: return F("ESP32-C3FH4"); // Max 160MHz, Single core, QFN 5*5, 4MB embedded flash, ESP32-C3-MINI-1, ESP32-C3-DevKitM-1
}
#endif // CONFIG_IDF_TARGET_ESP32C3
return F("ESP32-C3");
}
else if (6 == chip_model) { // ESP32-S3(beta3)
return F("ESP32-S3");
}
else if (7 == chip_model) { // ESP32-C6(beta)
#ifdef CONFIG_IDF_TARGET_ESP32C6
/* esptool:
def get_pkg_version(self):
num_word = 3
block1_addr = self.EFUSE_BASE + 0x044
word3 = self.read_reg(block1_addr + (4 * num_word))
pkg_version = (word3 >> 21) & 0x0F
return pkg_version
*/
uint32_t chip_ver = REG_GET_FIELD(EFUSE_RD_MAC_SPI_SYS_3_REG, EFUSE_PKG_VERSION);
uint32_t pkg_version = chip_ver & 0x7;
// uint32_t pkg_version = esp_efuse_get_pkg_ver();
// AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("HDW: ESP32 Model %d, Revision %d, Core %d, Package %d"), chip_info.model, chip_revision, chip_info.cores, chip_ver);
switch (pkg_version) {
case 0: return F("ESP32-C6");
}
#endif // CONFIG_IDF_TARGET_ESP32C6
return F("ESP32-C6");
}
else if (9 == chip_model) { // ESP32-S3
/*
ESP32-S3 Series
- 32-bit MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
- Xtensa® 32-bit LX7 dual-core processor that operates at up to 240 MHz
- 512 KB of SRAM and 384 KB of ROM on the chip, and SPI, Dual SPI, Quad SPI, Octal SPI, QPI, and OPI interfaces that allow connection to flash and external RAM
- Additional support for vector instructions in the MCU, which provides acceleration for neural network computing and signal processing workloads
- Peripherals include 45 programmable GPIOs, SPI, I2S, I2C, PWM, RMT, ADC and UART, SD/MMC host and TWAITM
- Reliable security features ensured by RSA-based secure boot, AES-XTS-based flash encryption, the innovative digital signature and the HMAC peripheral, “World Controller”
*/
#ifdef CONFIG_IDF_TARGET_ESP32S3
// no variants for now
#endif // CONFIG_IDF_TARGET_ESP32S3
return F("ESP32-S3"); // Max 240MHz, Dual core, QFN 7*7, ESP32-S3-WROOM-1, ESP32-S3-DevKitC-1
}
else if (10 == chip_model) { // ESP32-H2(beta1)
#ifdef CONFIG_IDF_TARGET_ESP32H2
/* esptool:
def get_pkg_version(self):
num_word = 3
block1_addr = self.EFUSE_BASE + 0x044
word3 = self.read_reg(block1_addr + (4 * num_word))
pkg_version = (word3 >> 21) & 0x0F
return pkg_version
*/
uint32_t chip_ver = REG_GET_FIELD(EFUSE_RD_MAC_SPI_SYS_3_REG, EFUSE_PKG_VERSION);
uint32_t pkg_version = chip_ver & 0x7;
// uint32_t pkg_version = esp_efuse_get_pkg_ver();
// AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("HDW: ESP32 Model %d, Revision %d, Core %d, Package %d"), chip_info.model, chip_revision, chip_info.cores, chip_ver);
switch (pkg_version) {
case 0: return F("ESP32-H2");
}
#endif // CONFIG_IDF_TARGET_ESP32H2
return F("ESP32-H2");
}
else if (12 == chip_model) { // ESP32-C2 = ESP8684
/*
ESP32-C2 Series
- 32-bit RISC-V MCU & 2.4 GHz Wi-Fi & Bluetooth 5 (LE)
- 32-bit RISC-V single-core processor that operates at up to 120 MHz
- State-of-the-art power and RF performance
- 576 KB ROM, 272 KB SRAM (16 KB for cache) on the chip
- 14 programmable GPIOs: SPI, UART, I2C, LED PWM controller, General DMA controller (GDMA), SAR ADC, Temperature sensor
*/
return F("ESP32-C2");
}
else if (13 == chip_model) { // ESP32-C6
/*
ESP32-C6 Series
- 32-bit RISC-V MCU & 2.4 GHz Wi-Fi 6 & Bluetooth 5 (LE) & IEEE 802.15.4
- 32-bit RISC-V single-core processor that operates at up to 160 MHz
- State-of-the-art power and RF performance
- 320 KB ROM, 512 KB SRAM, 16 KB Low-power SRAM on the chip, and works with external flash
- 30 (QFN40) or 22 (QFN32) programmable GPIOs, with support for SPI, UART, I2C, I2S, RMT, TWAI and PWM
*/
return F("ESP32-C6");
}
else if (14 == chip_model) { // ESP32-H2(beta2)
return F("ESP32-H2");
}
return F("ESP32");
}
String GetDeviceHardwareRevision(void) {
// ESP32-S2
// ESP32-D0WDQ6 rev.1
// ESP32-C3 rev.2
// ESP32-C3 rev.3
String result = GetDeviceHardware(); // ESP32-C3
esp_chip_info_t chip_info;
esp_chip_info(&chip_info);
char revision[10] = { 0 };
if (chip_info.revision) {
snprintf_P(revision, sizeof(revision), PSTR(" rev.%d"), chip_info.revision);
}
result += revision; // ESP32-C3 rev.3
return result;
}
String GetCodeCores(void) {
#if defined(CORE32SOLO1)
return F("single-core");
#else
return F("");
#endif
}
/*
* ESP32 v1 and v2 needs some special patches to use PSRAM.
* Standard Tasmota 32 do not include those patches.
* If using ESP32 v1, please add: `-mfix-esp32-psram-cache-issue -lc-psram-workaround -lm-psram-workaround`
*
* This function returns true if the chip supports PSRAM natively (v3) or if the
* patches are present.
*/
bool CanUsePSRAM(void) {
if (!FoundPSRAM()) return false;
#ifdef HAS_PSRAM_FIX
return true;
#endif
#ifdef CONFIG_IDF_TARGET_ESP32
esp_chip_info_t chip_info;
esp_chip_info(&chip_info);
if ((CHIP_ESP32 == chip_info.model) && (chip_info.revision < 3)) {
return false;
}
#if ESP_IDF_VERSION_MAJOR < 4
uint32_t chip_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_PKG);
uint32_t pkg_version = chip_ver & 0x7;
if ((CHIP_ESP32 == chip_info.model) && (pkg_version >= 6)) {
return false; // support for embedded PSRAM of ESP32-PICO-V3-02 requires esp-idf 4.4
}
#endif // ESP_IDF_VERSION_MAJOR < 4
#endif // CONFIG_IDF_TARGET_ESP32
return true;
}
#endif // ESP32
/*********************************************************************************************\
* ESP Support
\*********************************************************************************************/
uint32_t ESP_getFreeHeap1024(void) {
return ESP_getFreeHeap() / 1024;
}
/*
float ESP_getFreeHeap1024(void) {
return ((float)ESP_getFreeHeap()) / 1024;
}
*/
const char kFlashModes[] PROGMEM = "QIO|QOUT|DIO|DOUT|Fast|Slow";
/*
typedef enum {
FM_QIO = 0x00,
FM_QOUT = 0x01,
FM_DIO = 0x02,
FM_DOUT = 0x03,
FM_FAST_READ = 0x04,
FM_SLOW_READ = 0x05,
FM_UNKNOWN = 0xff
} FlashMode_t;
*/
String ESP_getFlashChipMode(void) {
uint32_t flash_mode = ESP.getFlashChipMode();
if (flash_mode > 5) { flash_mode = 3; }
char stemp[6];
return GetTextIndexed(stemp, sizeof(stemp), flash_mode, kFlashModes);
}
/*********************************************************************************************\
* High entropy hardware random generator
* Thanks to DigitalAlchemist
\*********************************************************************************************/
// Based on code from https://raw.githubusercontent.com/espressif/esp-idf/master/components/esp32/hw_random.c
uint32_t HwRandom(void) {
#if ESP8266
// https://web.archive.org/web/20160922031242/http://esp8266-re.foogod.com/wiki/Random_Number_Generator
#define _RAND_ADDR 0x3FF20E44UL
#endif // ESP8266
#ifdef ESP32
#define _RAND_ADDR 0x3FF75144UL
#endif // ESP32
static uint32_t last_ccount = 0;
uint32_t ccount;
uint32_t result = 0;
do {
ccount = ESP.getCycleCount();
result ^= *(volatile uint32_t *)_RAND_ADDR;
} while (ccount - last_ccount < 64);
last_ccount = ccount;
return result ^ *(volatile uint32_t *)_RAND_ADDR;
#undef _RAND_ADDR
}