Logo # RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. **Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz) 8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. This release will be supported from ESP32/Arduino library Core version **2.0.2.1**. Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.2 have been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface. ## Initial installation Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/). ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**. - **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota4M.bin** = The Tasmota version with most drivers and filesystem for 4M+ flash. - **tasmota-AF.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash. - **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. - **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota/release-11.1.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32 based The following binary downloads have been compiled with ESP32/Arduino library core version **2.0.3**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota32c3.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3 and 4M+ flash. - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. - **tasmota32-AF.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash. - **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash. - **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - http://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota32/release-11.1.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin`` ## Additional information [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v11.1.0.2 ### Added - Command ``SetOption139 0/1`` to switch between pressure unit "mmHg" (0) or "inHg" (1) when ``SO24 1`` [#15350](https://github.com/arendst/Tasmota/issues/15350) - Command ``SetOption140 0/1`` to switch between MQTT Clean Session (0) or Persistent Session (1) [#15530](https://github.com/arendst/Tasmota/issues/15530) - Command ``EnergyExportActive`` to (p)reset energy export active for supported devices. Currently ADE7880 only [#13515](https://github.com/arendst/Tasmota/issues/13515) - Command ``IfxRp ""|`` adds optional InfluxDb Retention Policy [#15513](https://github.com/arendst/Tasmota/issues/15513) - Support for Sonoff MS01 soil moisture sensor [#15335](https://github.com/arendst/Tasmota/issues/15335) - Support for daisy chaining MAX7219 displays [#15345](https://github.com/arendst/Tasmota/issues/15345) - Sonoff SPM delayed SetPowerOnState [#13447](https://github.com/arendst/Tasmota/issues/13447) - Support for flowrate meters like YF-DN50 and similary [#15474](https://github.com/arendst/Tasmota/issues/15474) - ESP32 Command ``Restart 3`` to switch between SafeBoot and Production ### Breaking Changed ### Changed - Prepare to remove dedicated Home Assistant discovery in favour of Tasmota Discovery and hatasmota - ESP32 Tasmota SafeBoot with changed partition scheme allowing larger binaries ### Fixed - Improv initial or erase device installation failing to provide Configure WiFi option - SCD40 start low power command [#15361](https://github.com/arendst/Tasmota/issues/15361) - BL09xx negative power presentation [#15374](https://github.com/arendst/Tasmota/issues/15374) ### Removed - Arduino IDE support