# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. **Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz) 8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. This release will be supported from ESP32/Arduino library Core version **2.0.7**. Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.7 have been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface. ## Initial installation Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/). ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**. - **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota-4M.bin** = The Tasmota version with most drivers and filesystem for 4M+ flash. - **tasmota-AD.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash. - **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. - **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota/release-12.4.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32, ESP32-C3, ESP32-S2 and ESP32-S3 based The following binary downloads have been compiled with ESP32/Arduino library core version **2.0.7**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota32xy.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 and 4M+ flash. - **tasmota32xycdc.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 with serial over embedded USB CDC only and 4M+ flash. - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. - **tasmota32-AD.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. - **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash. - **tasmota32-nspanel.bin** = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support. - **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash. - **tasmota32-zbbridgepro.bin** - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - https://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from - https://ota.tasmota.com/tasmota32/release-12.4.0 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin`` ## Additional information [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v12.4.0.4 ### Added - Command ``SwitchMode0`` to show or set all SwitchModes - Support for multiple MCP23008/MCP23017/MCP23S17 as switch/button/relay if enabled with `#define USE_MCP23XXX_DRV` - Support for multiple PCF8574 as switch/button/relay if enabled with `#define USE_PCF8574` and `#define USE_PCF8574_MODE2` - NTP time request from gateway [#17984](https://github.com/arendst/Tasmota/issues/17984) - Extended Tariff command for forced tariff [#18080](https://github.com/arendst/Tasmota/issues/18080) - Zigbee send Tuya 'magic spell' to unlock devices when pairing [#18144](https://github.com/arendst/Tasmota/issues/18144) - Berry support for Tensorflow Lite (TFL) by Christiaan Baars [#18119](https://github.com/arendst/Tasmota/issues/18119) - Berry `webclient` features - Display TM1650 commands like TM1637 [#18109](https://github.com/arendst/Tasmota/issues/18109) - Support for PMSA003I Air Quality Sensor by Jean-Pierre Deschamps [#18214](https://github.com/arendst/Tasmota/issues/18214) - Support for DingTian virtual switch/button/relay [#18223](https://github.com/arendst/Tasmota/issues/18223) - Matter support simple Relay on Apple Homekit by Stephan Hadinger [#18239](https://github.com/arendst/Tasmota/issues/18239) - VSC Pio menu bar extensions by @Jason2866 [#18233](https://github.com/arendst/Tasmota/issues/18233) ### Breaking Changed - Shelly Pro 4PM using standard MCP23xxx driver and needs one time Auto-Configuration ### Changed - ESP32 Framework (Core) from v2.0.6 to v2.0.7 - ESP32 LVGL library from v8.3.3 to v8.3.5 (no functional change) - LibTeleinfo from v1.1.3 to v1.1.5 [#18050](https://github.com/arendst/Tasmota/issues/18050) - Increase number of (virtual)relays and (virtual)buttons to 32 - ADC Range oversample from 2 to 32 [#17975](https://github.com/arendst/Tasmota/issues/17975) - Move #define OTA_URL from user_config.h to board files for better inital support [#18008](https://github.com/arendst/Tasmota/issues/18008) - Removed absolute url from filesystem [#18148](https://github.com/arendst/Tasmota/issues/18148) ### Fixed - TuyaMcu v1 sequence fix [#17625](https://github.com/arendst/Tasmota/issues/17625) - SEN5X floats and units [#17961](https://github.com/arendst/Tasmota/issues/17961) - Energytotals cannot be set to negative values [#17965](https://github.com/arendst/Tasmota/issues/17965) - SR04 driver single pin ultrasonic sensor detection [#17966](https://github.com/arendst/Tasmota/issues/17966) - IR panasonic protocol regression from v12.0.2.4 [#18013](https://github.com/arendst/Tasmota/issues/18013) - EnergyTotal divided twice during minimal upgrade step regression from v12.3.1.3 [#18024](https://github.com/arendst/Tasmota/issues/18024) - TuyaMcu v1 timer integer overflow [#18048](https://github.com/arendst/Tasmota/issues/18048) - PZEM energy monitor stabilize period on larger configs [#18103](https://github.com/arendst/Tasmota/issues/18103) - Rule topic comparison [#18144](https://github.com/arendst/Tasmota/issues/18144) - Refactor energy monitoring reducing stack usage and solve inherent exceptions and watchdogs [#18164](https://github.com/arendst/Tasmota/issues/18164) - ESP32 energy period shows kWh value instead of Wh regression from v12.3.1.5 [#15856](https://github.com/arendst/Tasmota/issues/15856)