/*
sonoff.ino - Sonoff-Tasmota firmware for iTead Sonoff, Wemos and NodeMCU hardware
Copyright (C) 2018 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
/*====================================================
Prerequisites:
- Change libraries/PubSubClient/src/PubSubClient.h
#define MQTT_MAX_PACKET_SIZE 1000
- Select IDE Tools - Flash Mode: "DOUT"
- Select IDE Tools - Flash Size: "1M (no SPIFFS)"
====================================================*/
#define VERSION 0x050D0101 // 5.13.1a
// Location specific includes
#include // Arduino_Esp8266 version information (ARDUINO_ESP8266_RELEASE and ARDUINO_ESP8266_RELEASE_2_3_0)
#include "sonoff.h" // Enumeration used in user_config.h
#include "user_config.h" // Fixed user configurable options
#ifdef USE_CONFIG_OVERRIDE
#include "user_config_override.h" // Configuration overrides for user_config.h
#endif
#include "sonoff_post.h" // Configuration overrides for all previous includes
#include "i18n.h" // Language support configured by user_config.h
#include "sonoff_template.h" // Hardware configuration
#ifdef ARDUINO_ESP8266_RELEASE_2_4_0
#include "lwip/init.h"
#if LWIP_VERSION_MAJOR != 1
#error Please use stable lwIP v1.4
#endif
#endif
// Libraries
#include // RTC, Energy, OSWatch
#include // MQTT, Ota, WifiManager
#include // MQTT, Ota
#include // Ota
#include // Webserver, Updater
#include // WemoHue, IRremote, Domoticz
#ifdef USE_WEBSERVER
#include // WifiManager, Webserver
#include // WifiManager
#endif // USE_WEBSERVER
#ifdef USE_ARDUINO_OTA
#include // Arduino OTA
#ifndef USE_DISCOVERY
#define USE_DISCOVERY
#endif
#endif // USE_ARDUINO_OTA
#ifdef USE_DISCOVERY
#include // MQTT, Webserver, Arduino OTA
#endif // USE_DISCOVERY
#ifdef USE_I2C
#include // I2C support library
#endif // USE_I2C
#ifdef USE_SPI
#include // SPI support, TFT
#endif // USE_SPI
// Structs
#include "settings.h"
enum TasmotaCommands {
CMND_BACKLOG, CMND_DELAY, CMND_POWER, CMND_STATUS, CMND_STATE, CMND_POWERONSTATE, CMND_PULSETIME,
CMND_BLINKTIME, CMND_BLINKCOUNT, CMND_SENSOR, CMND_SAVEDATA, CMND_SETOPTION, CMND_TEMPERATURE_RESOLUTION, CMND_HUMIDITY_RESOLUTION,
CMND_PRESSURE_RESOLUTION, CMND_POWER_RESOLUTION, CMND_VOLTAGE_RESOLUTION, CMND_CURRENT_RESOLUTION, CMND_ENERGY_RESOLUTION, CMND_MODULE, CMND_MODULES,
CMND_GPIO, CMND_GPIOS, CMND_PWM, CMND_PWMFREQUENCY, CMND_PWMRANGE, CMND_COUNTER, CMND_COUNTERTYPE,
CMND_COUNTERDEBOUNCE, CMND_SLEEP, CMND_UPGRADE, CMND_UPLOAD, CMND_OTAURL, CMND_SERIALLOG, CMND_SYSLOG,
CMND_LOGHOST, CMND_LOGPORT, CMND_IPADDRESS, CMND_NTPSERVER, CMND_AP, CMND_SSID, CMND_PASSWORD, CMND_HOSTNAME,
CMND_WIFICONFIG, CMND_FRIENDLYNAME, CMND_SWITCHMODE, CMND_WEBSERVER, CMND_WEBPASSWORD, CMND_WEBLOG, CMND_EMULATION,
CMND_TELEPERIOD, CMND_RESTART, CMND_RESET, CMND_TIMEZONE, CMND_ALTITUDE, CMND_LEDPOWER, CMND_LEDSTATE,
CMND_I2CSCAN, CMND_SERIALSEND, CMND_BAUDRATE, CMND_SERIALDELIMITER };
const char kTasmotaCommands[] PROGMEM =
D_CMND_BACKLOG "|" D_CMND_DELAY "|" D_CMND_POWER "|" D_CMND_STATUS "|" D_CMND_STATE "|" D_CMND_POWERONSTATE "|" D_CMND_PULSETIME "|"
D_CMND_BLINKTIME "|" D_CMND_BLINKCOUNT "|" D_CMND_SENSOR "|" D_CMND_SAVEDATA "|" D_CMND_SETOPTION "|" D_CMND_TEMPERATURE_RESOLUTION "|" D_CMND_HUMIDITY_RESOLUTION "|"
D_CMND_PRESSURE_RESOLUTION "|" D_CMND_POWER_RESOLUTION "|" D_CMND_VOLTAGE_RESOLUTION "|" D_CMND_CURRENT_RESOLUTION "|" D_CMND_ENERGY_RESOLUTION "|" D_CMND_MODULE "|" D_CMND_MODULES "|"
D_CMND_GPIO "|" D_CMND_GPIOS "|" D_CMND_PWM "|" D_CMND_PWMFREQUENCY "|" D_CMND_PWMRANGE "|" D_CMND_COUNTER "|" D_CMND_COUNTERTYPE "|"
D_CMND_COUNTERDEBOUNCE "|" D_CMND_SLEEP "|" D_CMND_UPGRADE "|" D_CMND_UPLOAD "|" D_CMND_OTAURL "|" D_CMND_SERIALLOG "|" D_CMND_SYSLOG "|"
D_CMND_LOGHOST "|" D_CMND_LOGPORT "|" D_CMND_IPADDRESS "|" D_CMND_NTPSERVER "|" D_CMND_AP "|" D_CMND_SSID "|" D_CMND_PASSWORD "|" D_CMND_HOSTNAME "|"
D_CMND_WIFICONFIG "|" D_CMND_FRIENDLYNAME "|" D_CMND_SWITCHMODE "|" D_CMND_WEBSERVER "|" D_CMND_WEBPASSWORD "|" D_CMND_WEBLOG "|" D_CMND_EMULATION "|"
D_CMND_TELEPERIOD "|" D_CMND_RESTART "|" D_CMND_RESET "|" D_CMND_TIMEZONE "|" D_CMND_ALTITUDE "|" D_CMND_LEDPOWER "|" D_CMND_LEDSTATE "|"
D_CMND_I2CSCAN "|" D_CMND_SERIALSEND "|" D_CMND_BAUDRATE "|" D_CMND_SERIALDELIMITER;
const char kOptionOff[] PROGMEM = "OFF|" D_OFF "|" D_FALSE "|" D_STOP "|" D_CELSIUS ;
const char kOptionOn[] PROGMEM = "ON|" D_ON "|" D_TRUE "|" D_START "|" D_FAHRENHEIT "|" D_USER ;
const char kOptionToggle[] PROGMEM = "TOGGLE|" D_TOGGLE "|" D_ADMIN ;
const char kOptionBlink[] PROGMEM = "BLINK|" D_BLINK ;
const char kOptionBlinkOff[] PROGMEM = "BLINKOFF|" D_BLINKOFF ;
// Global variables
int baudrate = APP_BAUDRATE; // Serial interface baud rate
SerialConfig serial_config = SERIAL_8N1; // Serial interface configuration 8 data bits, No parity, 1 stop bit
byte serial_in_byte; // Received byte
unsigned long serial_polling_window = 0; // Serial polling window
int serial_in_byte_counter = 0; // Index in receive buffer
byte dual_hex_code = 0; // Sonoff dual input flag
uint16_t dual_button_code = 0; // Sonoff dual received code
int16_t save_data_counter; // Counter and flag for config save to Flash
uint8_t fallback_topic_flag = 0; // Use Topic or FallbackTopic
unsigned long state_loop_timer = 0; // State loop timer
int state = 0; // State per second flag
int ota_state_flag = 0; // OTA state flag
int ota_result = 0; // OTA result
byte ota_retry_counter = OTA_ATTEMPTS; // OTA retry counter
char *ota_url; // OTA url string
int restart_flag = 0; // Sonoff restart flag
int wifi_state_flag = WIFI_RESTART; // Wifi state flag
uint32_t uptime = 0; // Counting every second until 4294967295 = 130 year
boolean latest_uptime_flag = true; // Signal latest uptime
int tele_period = 0; // Tele period timer
byte web_log_index = 1; // Index in Web log buffer (should never be 0)
byte reset_web_log_flag = 0; // Reset web console log
byte devices_present = 0; // Max number of devices supported
int status_update_timer = 0; // Refresh initial status
uint16_t pulse_timer[MAX_PULSETIMERS] = { 0 }; // Power off timer
uint16_t blink_timer = 0; // Power cycle timer
uint16_t blink_counter = 0; // Number of blink cycles
power_t blink_power; // Blink power state
power_t blink_mask = 0; // Blink relay active mask
power_t blink_powersave; // Blink start power save state
uint16_t mqtt_cmnd_publish = 0; // ignore flag for publish command
power_t latching_power = 0; // Power state at latching start
uint8_t latching_relay_pulse = 0; // Latching relay pulse timer
uint8_t backlog_index = 0; // Command backlog index
uint8_t backlog_pointer = 0; // Command backlog pointer
uint8_t backlog_mutex = 0; // Command backlog pending
uint16_t backlog_delay = 0; // Command backlog delay
uint8_t interlock_mutex = 0; // Interlock power command pending
#ifdef USE_MQTT_TLS
WiFiClientSecure EspClient; // Wifi Secure Client
#else
WiFiClient EspClient; // Wifi Client
#endif
WiFiUDP PortUdp; // UDP Syslog and Alexa
power_t power = 0; // Current copy of Settings.power
byte syslog_level; // Current copy of Settings.syslog_level
uint16_t syslog_timer = 0; // Timer to re-enable syslog_level
byte seriallog_level; // Current copy of Settings.seriallog_level
uint16_t seriallog_timer = 0; // Timer to disable Seriallog
uint8_t sleep; // Current copy of Settings.sleep
uint8_t stop_flash_rotate = 0; // Allow flash configuration rotation
int blinks = 201; // Number of LED blinks
uint8_t blinkstate = 0; // LED state
uint8_t blockgpio0 = 4; // Block GPIO0 for 4 seconds after poweron to workaround Wemos D1 RTS circuit
uint8_t lastbutton[MAX_KEYS] = { NOT_PRESSED, NOT_PRESSED, NOT_PRESSED, NOT_PRESSED }; // Last button states
uint16_t holdbutton[MAX_KEYS] = { 0 }; // Timer for button hold
uint8_t multiwindow[MAX_KEYS] = { 0 }; // Max time between button presses to record press count
uint8_t multipress[MAX_KEYS] = { 0 }; // Number of button presses within multiwindow
uint8_t lastwallswitch[MAX_SWITCHES]; // Last wall switch states
uint8_t holdwallswitch[MAX_SWITCHES] = { 0 }; // Timer for wallswitch push button hold
mytmplt my_module; // Active copy of Module name and GPIOs
uint8_t pin[GPIO_MAX]; // Possible pin configurations
power_t rel_inverted = 0; // Relay inverted flag (1 = (0 = On, 1 = Off))
uint8_t led_inverted = 0; // LED inverted flag (1 = (0 = On, 1 = Off))
uint8_t pwm_inverted = 0; // PWM inverted flag (1 = inverted)
uint8_t dht_flg = 0; // DHT configured
uint8_t energy_flg = 1; // Energy monitor configured
uint8_t i2c_flg = 0; // I2C configured
uint8_t spi_flg = 0; // SPI configured
uint8_t light_type = 0; // Light types
bool pwm_present = false; // Any PWM channel configured with SetOption15 0
boolean mdns_begun = false;
unsigned long features = 0UL;
char my_version[33]; // Composed version string
char my_hostname[33]; // Composed Wifi hostname
char mqtt_client[33]; // Composed MQTT Clientname
char mqtt_topic[33]; // Composed MQTT topic
char serial_in_buffer[INPUT_BUFFER_SIZE]; // Receive buffer
char mqtt_data[MESSZ]; // MQTT publish buffer and web page ajax buffer
char log_data[LOGSZ]; // Logging
char web_log[WEB_LOG_SIZE] = {'\0'}; // Web log buffer
String backlog[MAX_BACKLOG]; // Command backlog
/********************************************************************************************/
char* Format(char* output, const char* input, int size)
{
char *token;
uint8_t digits = 0;
if (strstr(input, "%")) {
strlcpy(output, input, size);
token = strtok(output, "%");
if (strstr(input, "%") == input) {
output[0] = '\0';
} else {
token = strtok(NULL, "");
}
if (token != NULL) {
digits = atoi(token);
if (digits) {
if (strchr(token, 'd')) {
snprintf_P(output, size, PSTR("%s%c0%dd"), output, '%', digits);
snprintf_P(output, size, output, ESP.getChipId() & 0x1fff); // %04d - short chip ID in dec, like in hostname
} else {
snprintf_P(output, size, PSTR("%s%c0%dX"), output, '%', digits);
snprintf_P(output, size, output, ESP.getChipId()); // %06X - full chip ID in hex
}
} else {
if (strchr(token, 'd')) {
snprintf_P(output, size, PSTR("%s%d"), output, ESP.getChipId()); // %d - full chip ID in dec
digits = 8;
}
}
}
}
if (!digits) strlcpy(output, input, size);
return output;
}
char* GetOtaUrl(char *otaurl, size_t otaurl_size)
{
if (strstr(Settings.ota_url, "%04d") != NULL) { // OTA url contains placeholder for chip ID
snprintf(otaurl, otaurl_size, Settings.ota_url, ESP.getChipId() & 0x1fff);
}
else if (strstr(Settings.ota_url, "%d") != NULL) { // OTA url contains placeholder for chip ID
snprintf_P(otaurl, otaurl_size, Settings.ota_url, ESP.getChipId());
}
else {
snprintf(otaurl, otaurl_size, Settings.ota_url);
}
return otaurl;
}
void GetTopic_P(char *stopic, byte prefix, char *topic, const char* subtopic)
{
/* prefix 0 = Cmnd
prefix 1 = Stat
prefix 2 = Tele
*/
char romram[CMDSZ];
String fulltopic;
snprintf_P(romram, sizeof(romram), subtopic);
if (fallback_topic_flag) {
fulltopic = FPSTR(kPrefixes[prefix]);
fulltopic += F("/");
fulltopic += mqtt_client;
} else {
fulltopic = Settings.mqtt_fulltopic;
if ((0 == prefix) && (-1 == fulltopic.indexOf(F(MQTT_TOKEN_PREFIX)))) {
fulltopic += F("/" MQTT_TOKEN_PREFIX); // Need prefix for commands to handle mqtt topic loops
}
for (byte i = 0; i < 3; i++) {
if ('\0' == Settings.mqtt_prefix[i][0]) {
snprintf_P(Settings.mqtt_prefix[i], sizeof(Settings.mqtt_prefix[i]), kPrefixes[i]);
}
}
fulltopic.replace(F(MQTT_TOKEN_PREFIX), Settings.mqtt_prefix[prefix]);
fulltopic.replace(F(MQTT_TOKEN_TOPIC), topic);
}
fulltopic.replace(F("#"), "");
fulltopic.replace(F("//"), "/");
if (!fulltopic.endsWith("/")) fulltopic += "/";
snprintf_P(stopic, TOPSZ, PSTR("%s%s"), fulltopic.c_str(), romram);
}
char* GetStateText(byte state)
{
if (state > 3) state = 1;
return Settings.state_text[state];
}
/********************************************************************************************/
void SetLatchingRelay(power_t power, uint8_t state)
{
power &= 1;
if (2 == state) { // Reset relay
state = 0;
latching_power = power;
latching_relay_pulse = 0;
}
else if (state && !latching_relay_pulse) { // Set port power to On
latching_power = power;
latching_relay_pulse = 2; // max 200mS (initiated by stateloop())
}
if (pin[GPIO_REL1 +latching_power] < 99) {
digitalWrite(pin[GPIO_REL1 +latching_power], bitRead(rel_inverted, latching_power) ? !state : state);
}
}
void SetDevicePower(power_t rpower)
{
uint8_t state;
if (POWER_ALL_ALWAYS_ON == Settings.poweronstate) { // All on and stay on
power = (1 << devices_present) -1;
rpower = power;
}
if (Settings.flag.interlock) { // Allow only one or no relay set
power_t mask = 1;
uint8_t count = 0;
for (byte i = 0; i < devices_present; i++) {
if (rpower & mask) count++;
mask <<= 1;
}
if (count > 1) {
power = 0;
rpower = 0;
}
}
XdrvSetPower(rpower);
if ((SONOFF_DUAL == Settings.module) || (CH4 == Settings.module)) {
Serial.write(0xA0);
Serial.write(0x04);
Serial.write(rpower &0xFF);
Serial.write(0xA1);
Serial.write('\n');
Serial.flush();
}
else if (EXS_RELAY == Settings.module) {
SetLatchingRelay(rpower, 1);
}
else {
for (byte i = 0; i < devices_present; i++) {
state = rpower &1;
if ((i < MAX_RELAYS) && (pin[GPIO_REL1 +i] < 99)) {
digitalWrite(pin[GPIO_REL1 +i], bitRead(rel_inverted, i) ? !state : state);
}
rpower >>= 1;
}
}
}
void SetLedPower(uint8_t state)
{
if (state) state = 1;
digitalWrite(pin[GPIO_LED1], (bitRead(led_inverted, 0)) ? !state : state);
}
/********************************************************************************************/
void MqttDataHandler(char* topic, byte* data, unsigned int data_len)
{
char *str;
if (!strcmp(Settings.mqtt_prefix[0],Settings.mqtt_prefix[1])) {
str = strstr(topic,Settings.mqtt_prefix[0]);
if ((str == topic) && mqtt_cmnd_publish) {
if (mqtt_cmnd_publish > 8) {
mqtt_cmnd_publish -= 8;
} else {
mqtt_cmnd_publish = 0;
}
return;
}
}
char topicBuf[TOPSZ];
char dataBuf[data_len+1];
char command [CMDSZ];
char stemp1[TOPSZ];
char *p;
char *type = NULL;
byte ptype = 0;
byte jsflg = 0;
byte lines = 1;
uint8_t grpflg = 0;
uint16_t i = 0;
uint16_t index;
uint32_t address;
strncpy(topicBuf, topic, sizeof(topicBuf));
for (i = 0; i < data_len; i++) {
if (!isspace(data[i])) break;
}
data_len -= i;
memcpy(dataBuf, data +i, sizeof(dataBuf));
dataBuf[sizeof(dataBuf)-1] = 0;
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_RESULT D_RECEIVED_TOPIC " %s, " D_DATA_SIZE " %d, " D_DATA " %s"),
topicBuf, data_len, dataBuf);
AddLog(LOG_LEVEL_DEBUG_MORE);
// if (LOG_LEVEL_DEBUG_MORE <= seriallog_level) Serial.println(dataBuf);
if (XdrvMqttData(topicBuf, sizeof(topicBuf), dataBuf, sizeof(dataBuf))) return;
grpflg = (strstr(topicBuf, Settings.mqtt_grptopic) != NULL);
fallback_topic_flag = (strstr(topicBuf, mqtt_client) != NULL);
type = strrchr(topicBuf, '/') +1; // Last part of received topic is always the command (type)
index = 1;
if (type != NULL) {
for (i = 0; i < strlen(type); i++) {
type[i] = toupper(type[i]);
}
while (isdigit(type[i-1])) {
i--;
}
if (i < strlen(type)) index = atoi(type +i);
type[i] = '\0';
}
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_RESULT D_GROUP " %d, " D_INDEX " %d, " D_COMMAND " %s, " D_DATA " %s"),
grpflg, index, type, dataBuf);
AddLog(LOG_LEVEL_DEBUG);
if (type != NULL) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_COMMAND "\":\"" D_JSON_ERROR "\"}"));
if (Settings.ledstate &0x02) blinks++;
if (!strcmp(dataBuf,"?")) data_len = 0;
int16_t payload = -99; // No payload
uint16_t payload16 = 0;
long payload32 = strtol(dataBuf, &p, 10);
if (p != dataBuf) {
payload = (int16_t) payload32; // -32766 - 32767
payload16 = (uint16_t) payload32; // 0 - 65535
} else {
payload32 = 0;
}
backlog_delay = MIN_BACKLOG_DELAY; // Reset backlog delay
if ((GetCommandCode(command, sizeof(command), dataBuf, kOptionOff) >= 0) || !strcasecmp(dataBuf, Settings.state_text[0])) {
payload = 0;
}
if ((GetCommandCode(command, sizeof(command), dataBuf, kOptionOn) >= 0) || !strcasecmp(dataBuf, Settings.state_text[1])) {
payload = 1;
}
if ((GetCommandCode(command, sizeof(command), dataBuf, kOptionToggle) >= 0) || !strcasecmp(dataBuf, Settings.state_text[2])) {
payload = 2;
}
if (GetCommandCode(command, sizeof(command), dataBuf, kOptionBlink) >= 0) {
payload = 3;
}
if (GetCommandCode(command, sizeof(command), dataBuf, kOptionBlinkOff) >= 0) {
payload = 4;
}
// snprintf_P(log_data, sizeof(log_data), PSTR("RSLT: Payload %d, Payload16 %d"), payload, payload16);
// AddLog(LOG_LEVEL_DEBUG);
int command_code = GetCommandCode(command, sizeof(command), type, kTasmotaCommands);
if (CMND_BACKLOG == command_code) {
if (data_len) {
uint8_t bl_pointer = (!backlog_pointer) ? MAX_BACKLOG -1 : backlog_pointer;
bl_pointer--;
char *blcommand = strtok(dataBuf, ";");
while ((blcommand != NULL) && (backlog_index != bl_pointer)) {
backlog[backlog_index] = String(blcommand);
backlog_index++;
if (backlog_index >= MAX_BACKLOG) backlog_index = 0;
blcommand = strtok(NULL, ";");
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_APPENDED);
} else {
uint8_t blflag = (backlog_pointer == backlog_index);
backlog_pointer = backlog_index;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, blflag ? D_JSON_EMPTY : D_JSON_ABORTED);
}
}
else if (CMND_DELAY == command_code) {
if ((payload >= MIN_BACKLOG_DELAY) && (payload <= 3600)) backlog_delay = payload;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, backlog_delay);
}
else if ((CMND_POWER == command_code) && (index > 0) && (index <= devices_present)) {
if ((payload < 0) || (payload > 4)) payload = 9;
ExecuteCommandPower(index, payload);
fallback_topic_flag = 0;
return;
}
else if (CMND_STATUS == command_code) {
if ((payload < 0) || (payload > MAX_STATUS)) payload = 99;
PublishStatus(payload);
fallback_topic_flag = 0;
return;
}
else if (CMND_STATE == command_code) {
mqtt_data[0] = '\0';
MqttShowState();
}
else if ((CMND_POWERONSTATE == command_code) && (Settings.module != MOTOR)) {
/* 0 = Keep relays off after power on
* 1 = Turn relays on after power on, if PulseTime set wait for PulseTime seconds, and turn relays off
* 2 = Toggle relays after power on
* 3 = Set relays to last saved state after power on
* 4 = Turn relays on and disable any relay control (used for Sonoff Pow to always measure power)
* 5 = Keep relays off after power on, if PulseTime set wait for PulseTime seconds, and turn relays on
*/
if ((payload >= POWER_ALL_OFF) && (payload <= POWER_ALL_OFF_PULSETIME_ON)) {
Settings.poweronstate = payload;
if (POWER_ALL_ALWAYS_ON == Settings.poweronstate) {
for (byte i = 1; i <= devices_present; i++) {
ExecuteCommandPower(i, POWER_ON);
}
}
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.poweronstate);
}
else if ((CMND_PULSETIME == command_code) && (index > 0) && (index <= MAX_PULSETIMERS)) {
if (data_len > 0) {
Settings.pulse_timer[index -1] = payload16; // 0 - 65535
pulse_timer[index -1] = 0;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_NVALUE_ACTIVE_NVALUE, command, index, Settings.pulse_timer[index -1], pulse_timer[index -1]);
}
else if (CMND_BLINKTIME == command_code) {
if ((payload > 2) && (payload <= 3600)) {
Settings.blinktime = payload;
if (blink_timer) blink_timer = Settings.blinktime;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.blinktime);
}
else if (CMND_BLINKCOUNT == command_code) {
if (data_len > 0) {
Settings.blinkcount = payload16; // 0 - 65535
if (blink_counter) blink_counter = Settings.blinkcount *2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.blinkcount);
}
else if (CMND_SAVEDATA == command_code) {
if ((payload >= 0) && (payload <= 3600)) {
Settings.save_data = payload;
save_data_counter = Settings.save_data;
}
SettingsSaveAll();
if (Settings.save_data > 1) {
snprintf_P(stemp1, sizeof(stemp1), PSTR(D_JSON_EVERY " %d " D_UNIT_SECOND), Settings.save_data);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, (Settings.save_data > 1) ? stemp1 : GetStateText(Settings.save_data));
}
else if (CMND_SENSOR == command_code) {
XdrvMailbox.index = index;
XdrvMailbox.data_len = data_len;
XdrvMailbox.payload16 = payload16;
XdrvMailbox.payload = payload;
XdrvMailbox.grpflg = grpflg;
XdrvMailbox.topic = command;
XdrvMailbox.data = dataBuf;
XsnsCall(FUNC_COMMAND);
// if (!XsnsCall(FUNC_COMMAND)) type = NULL;
}
else if ((CMND_SETOPTION == command_code) && ((index <= 21) || ((index > 31) && (index <= P_MAX_PARAM8 + 31)))) {
if (index <= 31) {
ptype = 0; // SetOption0 .. 31
} else {
ptype = 1; // SetOption32 ..
index = index -32;
}
if (payload >= 0) {
if (0 == ptype) { // SetOption0 .. 31
if (payload <= 1) {
switch (index) {
case 3: // mqtt
case 15: // pwm_control
restart_flag = 2;
case 0: // save_state
case 1: // button_restrict
case 2: // value_units
case 4: // mqtt_response
case 8: // temperature_conversion
case 10: // mqtt_offline
case 11: // button_swap
case 12: // stop_flash_rotate
case 13: // button_single
case 14: // interlock
case 16: // ws_clock_reverse
case 17: // decimal_text
case 18: // light_signal
case 19: // hass_discovery
case 20: // not_power_linked
case 21: // no_power_on_check
// case 22: // mqtt_serial - use commands SerialSend and SerialLog
// case 23: // rules_enabled - use command Rule
bitWrite(Settings.flag.data, index, payload);
}
if (12 == index) { // stop_flash_rotate
stop_flash_rotate = payload;
SettingsSave(2);
}
#ifdef USE_HOME_ASSISTANT
if (19 == index) { // hass_discovery
HAssDiscovery(1);
}
#endif // USE_HOME_ASSISTANT
}
}
else { // SetOption32 ..
switch (index) {
case P_HOLD_TIME:
if ((payload >= 1) && (payload <= 250)) {
Settings.param[P_HOLD_TIME] = payload;
}
break;
case P_MAX_POWER_RETRY:
if ((payload >= 1) && (payload <= 250)) {
Settings.param[P_MAX_POWER_RETRY] = payload;
}
break;
}
}
}
if (ptype) snprintf_P(stemp1, sizeof(stemp1), PSTR("%d"), Settings.param[index]);
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, (ptype) ? index +32 : index, (ptype) ? stemp1 : GetStateText(bitRead(Settings.flag.data, index)));
}
else if (CMND_TEMPERATURE_RESOLUTION == command_code) {
if ((payload >= 0) && (payload <= 3)) {
Settings.flag2.temperature_resolution = payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.temperature_resolution);
}
else if (CMND_HUMIDITY_RESOLUTION == command_code) {
if ((payload >= 0) && (payload <= 3)) {
Settings.flag2.humidity_resolution = payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.humidity_resolution);
}
else if (CMND_PRESSURE_RESOLUTION == command_code) {
if ((payload >= 0) && (payload <= 3)) {
Settings.flag2.pressure_resolution = payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.pressure_resolution);
}
else if (CMND_POWER_RESOLUTION == command_code) {
if ((payload >= 0) && (payload <= 3)) {
Settings.flag2.wattage_resolution = payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.wattage_resolution);
}
else if (CMND_VOLTAGE_RESOLUTION == command_code) {
if ((payload >= 0) && (payload <= 3)) {
Settings.flag2.voltage_resolution = payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.voltage_resolution);
}
else if (CMND_CURRENT_RESOLUTION == command_code) {
if ((payload >= 0) && (payload <= 3)) {
Settings.flag2.current_resolution = payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.current_resolution);
}
else if (CMND_ENERGY_RESOLUTION == command_code) {
if ((payload >= 0) && (payload <= 5)) {
Settings.flag2.energy_resolution = payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.energy_resolution);
}
else if (CMND_MODULE == command_code) {
if ((payload > 0) && (payload <= MAXMODULE)) {
payload--;
Settings.last_module = Settings.module;
Settings.module = payload;
if (Settings.last_module != payload) {
for (byte i = 0; i < MAX_GPIO_PIN; i++) {
Settings.my_gp.io[i] = 0;
}
}
restart_flag = 2;
}
snprintf_P(stemp1, sizeof(stemp1), kModules[Settings.module].name);
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_SVALUE, command, Settings.module +1, stemp1);
}
else if (CMND_MODULES == command_code) {
for (byte i = 0; i < MAXMODULE; i++) {
if (!jsflg) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_MODULES "%d\":["), lines);
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,"), mqtt_data);
}
jsflg = 1;
snprintf_P(stemp1, sizeof(stemp1), kModules[i].name);
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s\"%d (%s)\""), mqtt_data, i +1, stemp1);
if ((strlen(mqtt_data) > (LOGSZ - TOPSZ)) || (i == MAXMODULE -1)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s]}"), mqtt_data);
MqttPublishPrefixTopic_P(RESULT_OR_STAT, type);
jsflg = 0;
lines++;
}
}
mqtt_data[0] = '\0';
}
else if ((CMND_GPIO == command_code) && (index < MAX_GPIO_PIN)) {
mytmplt cmodule;
memcpy_P(&cmodule, &kModules[Settings.module], sizeof(cmodule));
if ((GPIO_USER == cmodule.gp.io[index]) && (payload >= 0) && (payload < GPIO_SENSOR_END)) {
for (byte i = 0; i < MAX_GPIO_PIN; i++) {
if ((GPIO_USER == cmodule.gp.io[i]) && (Settings.my_gp.io[i] == payload)) {
Settings.my_gp.io[i] = 0;
}
}
Settings.my_gp.io[index] = payload;
restart_flag = 2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{"));
byte jsflg = 0;
for (byte i = 0; i < MAX_GPIO_PIN; i++) {
if (GPIO_USER == cmodule.gp.io[i]) {
if (jsflg) snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,"), mqtt_data);
jsflg = 1;
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s\"" D_CMND_GPIO "%d\":\"%d (%s)\""),
mqtt_data, i, Settings.my_gp.io[i], GetTextIndexed(stemp1, sizeof(stemp1), Settings.my_gp.io[i], kSensorNames));
}
}
if (jsflg) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_NOT_SUPPORTED);
}
}
else if (CMND_GPIOS == command_code) {
for (byte i = 0; i < GPIO_SENSOR_END; i++) {
if (!jsflg) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_GPIOS "%d\":["), lines);
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,"), mqtt_data);
}
jsflg = 1;
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s\"%d (%s)\""), mqtt_data, i, GetTextIndexed(stemp1, sizeof(stemp1), i, kSensorNames));
if ((strlen(mqtt_data) > (LOGSZ - TOPSZ)) || (i == GPIO_SENSOR_END -1)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s]}"), mqtt_data);
MqttPublishPrefixTopic_P(RESULT_OR_STAT, type);
jsflg = 0;
lines++;
}
}
mqtt_data[0] = '\0';
}
else if ((CMND_PWM == command_code) && pwm_present && (index > 0) && (index <= MAX_PWMS)) {
if ((payload >= 0) && (payload <= Settings.pwm_range) && (pin[GPIO_PWM1 + index -1] < 99)) {
Settings.pwm_value[index -1] = payload;
analogWrite(pin[GPIO_PWM1 + index -1], bitRead(pwm_inverted, index -1) ? Settings.pwm_range - payload : payload);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{"));
MqttShowPWMState(); // Render the PWM status to MQTT
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
}
else if (CMND_PWMFREQUENCY == command_code) {
if ((1 == payload) || ((payload >= 100) && (payload <= 4000))) {
Settings.pwm_frequency = (1 == payload) ? PWM_FREQ : payload;
analogWriteFreq(Settings.pwm_frequency); // Default is 1000 (core_esp8266_wiring_pwm.c)
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.pwm_frequency);
}
else if (CMND_PWMRANGE == command_code) {
if ((1 == payload) || ((payload > 254) && (payload < 1024))) {
Settings.pwm_range = (1 == payload) ? PWM_RANGE : payload;
for (byte i = 0; i < MAX_PWMS; i++) {
if (Settings.pwm_value[i] > Settings.pwm_range) {
Settings.pwm_value[i] = Settings.pwm_range;
}
}
analogWriteRange(Settings.pwm_range); // Default is 1023 (Arduino.h)
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.pwm_range);
}
else if ((CMND_COUNTER == command_code) && (index > 0) && (index <= MAX_COUNTERS)) {
if ((data_len > 0) && (pin[GPIO_CNTR1 + index -1] < 99)) {
RtcSettings.pulse_counter[index -1] = payload16;
Settings.pulse_counter[index -1] = payload16;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_LVALUE, command, index, RtcSettings.pulse_counter[index -1]);
}
else if ((CMND_COUNTERTYPE == command_code) && (index > 0) && (index <= MAX_COUNTERS)) {
if ((payload >= 0) && (payload <= 1) && (pin[GPIO_CNTR1 + index -1] < 99)) {
bitWrite(Settings.pulse_counter_type, index -1, payload &1);
RtcSettings.pulse_counter[index -1] = 0;
Settings.pulse_counter[index -1] = 0;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_NVALUE, command, index, bitRead(Settings.pulse_counter_type, index -1));
}
else if (CMND_COUNTERDEBOUNCE == command_code) {
if ((data_len > 0) && (payload16 < 32001)) {
Settings.pulse_counter_debounce = payload16;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.pulse_counter_debounce);
}
else if (CMND_SLEEP == command_code) {
if ((payload >= 0) && (payload < 251)) {
if ((!Settings.sleep && payload) || (Settings.sleep && !payload)) restart_flag = 2;
Settings.sleep = payload;
sleep = payload;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_UNIT_NVALUE_UNIT, command, sleep, (Settings.flag.value_units) ? " " D_UNIT_MILLISECOND : "", Settings.sleep, (Settings.flag.value_units) ? " " D_UNIT_MILLISECOND : "");
}
else if ((CMND_UPGRADE == command_code) || (CMND_UPLOAD == command_code)) {
// Check if the payload is numerically 1, and had no trailing chars.
// e.g. "1foo" or "1.2.3" could fool us.
// Check if the version we have been asked to upgrade to is higher than our current version.
// We also need at least 3 chars to make a valid version number string.
if (((1 == data_len) && (1 == payload)) || ((data_len >= 3) && NewerVersion(dataBuf))) {
ota_state_flag = 3;
// snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_VERSION " %s " D_JSON_FROM " %s\"}", command, my_version, Settings.ota_url);
snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_VERSION " %s " D_JSON_FROM " %s\"}", command, my_version, GetOtaUrl(stemp1, sizeof(stemp1)));
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), "{\"%s\":\"" D_JSON_ONE_OR_GT "\"}", command, my_version);
}
}
else if (CMND_OTAURL == command_code) {
if ((data_len > 0) && (data_len < sizeof(Settings.ota_url)))
strlcpy(Settings.ota_url, (1 == payload) ? OTA_URL : dataBuf, sizeof(Settings.ota_url));
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, Settings.ota_url);
}
else if (CMND_BAUDRATE == command_code) {
if (payload32 > 0) {
payload32 /= 1200; // Make it a valid baudrate
baudrate = (1 == payload) ? APP_BAUDRATE : payload32 * 1200;
SetSerialBaudrate(baudrate);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.baudrate * 1200);
}
else if ((CMND_SERIALSEND == command_code) && (index > 0) && (index <= 3)) {
SetSeriallog(LOG_LEVEL_NONE);
Settings.flag.mqtt_serial = 1;
if (data_len > 0) {
if (1 == index) {
Serial.printf("%s\n", dataBuf);
}
else if (2 == index) {
Serial.printf("%s", dataBuf);
}
else if (3 == index) {
uint16_t dat_len = data_len;
Serial.printf("%s", Unescape(dataBuf, &dat_len));
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_DONE);
}
}
else if (CMND_SERIALDELIMITER == command_code) {
if ((data_len > 0) && (payload < 256)) {
if (payload > 0) {
Settings.serial_delimiter = payload;
} else {
uint16_t dat_len = data_len;
Unescape(dataBuf, &dat_len);
Settings.serial_delimiter = dataBuf[0];
}
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.serial_delimiter);
}
else if (CMND_SERIALLOG == command_code) {
if ((payload >= LOG_LEVEL_NONE) && (payload <= LOG_LEVEL_ALL)) {
Settings.flag.mqtt_serial = 0;
SetSeriallog(payload);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_ACTIVE_NVALUE, command, Settings.seriallog_level, seriallog_level);
}
else if (CMND_SYSLOG == command_code) {
if ((payload >= LOG_LEVEL_NONE) && (payload <= LOG_LEVEL_ALL)) {
Settings.syslog_level = payload;
syslog_level = (Settings.flag2.emulation) ? 0 : payload;
syslog_timer = 0;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_ACTIVE_NVALUE, command, Settings.syslog_level, syslog_level);
}
else if (CMND_LOGHOST == command_code) {
if ((data_len > 0) && (data_len < sizeof(Settings.syslog_host))) {
strlcpy(Settings.syslog_host, (1 == payload) ? SYS_LOG_HOST : dataBuf, sizeof(Settings.syslog_host));
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, Settings.syslog_host);
}
else if (CMND_LOGPORT == command_code) {
if (payload16 > 0) Settings.syslog_port = (1 == payload16) ? SYS_LOG_PORT : payload16;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.syslog_port);
}
else if ((CMND_IPADDRESS == command_code) && (index > 0) && (index <= 4)) {
if (ParseIp(&address, dataBuf)) {
Settings.ip_address[index -1] = address;
// restart_flag = 2;
}
snprintf_P(stemp1, sizeof(stemp1), PSTR(" (%s)"), WiFi.localIP().toString().c_str());
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE_SVALUE, command, index, IPAddress(Settings.ip_address[index -1]).toString().c_str(), (1 == index) ? stemp1:"");
}
else if ((CMND_NTPSERVER == command_code) && (index > 0) && (index <= 3)) {
if ((data_len > 0) && (data_len < sizeof(Settings.ntp_server[0]))) {
strlcpy(Settings.ntp_server[index -1], (!strcmp(dataBuf,"0")) ? "" : (1 == payload) ? (1==index)?NTP_SERVER1:(2==index)?NTP_SERVER2:NTP_SERVER3 : dataBuf, sizeof(Settings.ntp_server[0]));
for (i = 0; i < strlen(Settings.ntp_server[index -1]); i++) {
if (Settings.ntp_server[index -1][i] == ',') Settings.ntp_server[index -1][i] = '.';
}
restart_flag = 2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, Settings.ntp_server[index -1]);
}
else if (CMND_AP == command_code) {
if ((payload >= 0) && (payload <= 2)) {
switch (payload) {
case 0: // Toggle
Settings.sta_active ^= 1;
break;
case 1: // AP1
case 2: // AP2
Settings.sta_active = payload -1;
}
restart_flag = 2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_SVALUE, command, Settings.sta_active +1, Settings.sta_ssid[Settings.sta_active]);
}
else if ((CMND_SSID == command_code) && (index > 0) && (index <= 2)) {
if ((data_len > 0) && (data_len < sizeof(Settings.sta_ssid[0]))) {
strlcpy(Settings.sta_ssid[index -1], (1 == payload) ? (1 == index) ? STA_SSID1 : STA_SSID2 : dataBuf, sizeof(Settings.sta_ssid[0]));
Settings.sta_active = index -1;
restart_flag = 2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, Settings.sta_ssid[index -1]);
}
else if ((CMND_PASSWORD == command_code) && (index > 0) && (index <= 2)) {
if ((data_len > 0) && (data_len < sizeof(Settings.sta_pwd[0]))) {
strlcpy(Settings.sta_pwd[index -1], (1 == payload) ? (1 == index) ? STA_PASS1 : STA_PASS2 : dataBuf, sizeof(Settings.sta_pwd[0]));
Settings.sta_active = index -1;
restart_flag = 2;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, Settings.sta_pwd[index -1]);
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_ASTERIX, command, index);
}
}
else if ((CMND_HOSTNAME == command_code) && !grpflg) {
if ((data_len > 0) && (data_len < sizeof(Settings.hostname))) {
strlcpy(Settings.hostname, (1 == payload) ? WIFI_HOSTNAME : dataBuf, sizeof(Settings.hostname));
if (strstr(Settings.hostname,"%")) {
strlcpy(Settings.hostname, WIFI_HOSTNAME, sizeof(Settings.hostname));
}
restart_flag = 2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, Settings.hostname);
}
else if (CMND_WIFICONFIG == command_code) {
if ((payload >= WIFI_RESTART) && (payload < MAX_WIFI_OPTION)) {
Settings.sta_config = payload;
wifi_state_flag = Settings.sta_config;
snprintf_P(stemp1, sizeof(stemp1), kWifiConfig[Settings.sta_config]);
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_WIFICONFIG "\":\"%s " D_JSON_SELECTED "\"}"), stemp1);
if (WifiState() != WIFI_RESTART) {
// snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s after restart"), mqtt_data);
restart_flag = 2;
}
} else {
snprintf_P(stemp1, sizeof(stemp1), kWifiConfig[Settings.sta_config]);
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_SVALUE, command, Settings.sta_config, stemp1);
}
}
else if ((CMND_FRIENDLYNAME == command_code) && (index > 0) && (index <= 4)) {
if ((data_len > 0) && (data_len < sizeof(Settings.friendlyname[0]))) {
if (1 == index) {
snprintf_P(stemp1, sizeof(stemp1), PSTR(FRIENDLY_NAME));
} else {
snprintf_P(stemp1, sizeof(stemp1), PSTR(FRIENDLY_NAME "%d"), index);
}
strlcpy(Settings.friendlyname[index -1], (1 == payload) ? stemp1 : dataBuf, sizeof(Settings.friendlyname[index -1]));
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_SVALUE, command, index, Settings.friendlyname[index -1]);
}
else if ((CMND_SWITCHMODE == command_code) && (index > 0) && (index <= MAX_SWITCHES)) {
if ((payload >= 0) && (payload < MAX_SWITCH_OPTION)) Settings.switchmode[index -1] = payload;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_INDEX_NVALUE, command, index, Settings.switchmode[index-1]);
}
#ifdef USE_WEBSERVER
else if (CMND_WEBSERVER == command_code) {
if ((payload >= 0) && (payload <= 2)) Settings.webserver = payload;
if (Settings.webserver) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_WEBSERVER "\":\"" D_JSON_ACTIVE_FOR " %s " D_JSON_ON_DEVICE " %s " D_JSON_WITH_IP_ADDRESS " %s\"}"),
(2 == Settings.webserver) ? D_ADMIN : D_USER, my_hostname, WiFi.localIP().toString().c_str());
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, GetStateText(0));
}
}
else if (CMND_WEBPASSWORD == command_code) {
if ((data_len > 0) && (data_len < sizeof(Settings.web_password))) {
strlcpy(Settings.web_password, (!strcmp(dataBuf,"0")) ? "" : (1 == payload) ? WEB_PASSWORD : dataBuf, sizeof(Settings.web_password));
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, Settings.web_password);
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_ASTERIX, command);
}
}
else if (CMND_WEBLOG == command_code) {
if ((payload >= LOG_LEVEL_NONE) && (payload <= LOG_LEVEL_ALL)) Settings.weblog_level = payload;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.weblog_level);
}
#ifdef USE_EMULATION
else if (CMND_EMULATION == command_code) {
if ((payload >= EMUL_NONE) && (payload < EMUL_MAX)) {
Settings.flag2.emulation = payload;
restart_flag = 2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.flag2.emulation);
}
#endif // USE_EMULATION
#endif // USE_WEBSERVER
else if (CMND_TELEPERIOD == command_code) {
if ((payload >= 0) && (payload < 3601)) {
Settings.tele_period = (1 == payload) ? TELE_PERIOD : payload;
if ((Settings.tele_period > 0) && (Settings.tele_period < 10)) Settings.tele_period = 10; // Do not allow periods < 10 seconds
tele_period = Settings.tele_period;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE_UNIT, command, Settings.tele_period, (Settings.flag.value_units) ? " " D_UNIT_SECOND : "");
}
else if (CMND_RESTART == command_code) {
switch (payload) {
case 1:
restart_flag = 2;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_RESTARTING);
break;
case 99:
AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_APPLICATION D_RESTARTING));
ESP.restart();
break;
default:
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_ONE_TO_RESTART);
}
}
else if (CMND_RESET == command_code) {
switch (payload) {
case 1:
restart_flag = 211;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command , D_JSON_RESET_AND_RESTARTING);
break;
case 2:
case 3:
restart_flag = 210 + payload;
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_RESET "\":\"" D_JSON_ERASE ", " D_JSON_RESET_AND_RESTARTING "\"}"));
break;
default:
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, D_JSON_ONE_TO_RESET);
}
}
else if (CMND_TIMEZONE == command_code) {
if ((data_len > 0) && (((payload >= -13) && (payload <= 14)) || (99 == payload))) Settings.timezone = payload;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.timezone);
}
else if (CMND_ALTITUDE == command_code) {
if ((data_len > 0) && ((payload >= -30000) && (payload <= 30000))) Settings.altitude = payload;
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.altitude);
}
else if (CMND_LEDPOWER == command_code) {
if ((payload >= 0) && (payload <= 2)) {
Settings.ledstate &= 8;
switch (payload) {
case 0: // Off
case 1: // On
Settings.ledstate = payload << 3;
break;
case 2: // Toggle
Settings.ledstate ^= 8;
break;
}
blinks = 0;
SetLedPower(Settings.ledstate &8);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_SVALUE, command, GetStateText(bitRead(Settings.ledstate, 3)));
}
else if (CMND_LEDSTATE == command_code) {
if ((payload >= 0) && (payload < MAX_LED_OPTION)) {
Settings.ledstate = payload;
if (!Settings.ledstate) SetLedPower(0);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), S_JSON_COMMAND_NVALUE, command, Settings.ledstate);
}
#ifdef USE_I2C
else if ((CMND_I2CSCAN == command_code) && i2c_flg) {
I2cScan(mqtt_data, sizeof(mqtt_data));
}
#endif // USE_I2C
else if (XdrvCommand(grpflg, type, index, dataBuf, data_len, payload, payload16)) {
// Serviced
}
else {
type = NULL;
}
}
if (type == NULL) {
blinks = 201;
snprintf_P(topicBuf, sizeof(topicBuf), PSTR(D_JSON_COMMAND));
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_COMMAND "\":\"" D_JSON_UNKNOWN "\"}"));
type = (char*)topicBuf;
}
if (mqtt_data[0] != '\0') MqttPublishPrefixTopic_P(RESULT_OR_STAT, type);
fallback_topic_flag = 0;
}
/********************************************************************************************/
boolean SendKey(byte key, byte device, byte state)
{
// key 0 = button_topic
// key 1 = switch_topic
// state 0 = off
// state 1 = on
// state 2 = toggle
// state 3 = hold
// state 9 = clear retain flag
char stopic[TOPSZ];
char scommand[CMDSZ];
char key_topic[sizeof(Settings.button_topic)];
boolean result = false;
char *tmp = (key) ? Settings.switch_topic : Settings.button_topic;
Format(key_topic, tmp, sizeof(key_topic));
if (Settings.flag.mqtt_enabled && MqttIsConnected() && (strlen(key_topic) != 0) && strcmp(key_topic, "0")) {
if (!key && (device > devices_present)) device = 1;
GetTopic_P(stopic, CMND, key_topic, GetPowerDevice(scommand, device, sizeof(scommand), key));
if (9 == state) {
mqtt_data[0] = '\0';
} else {
if ((!strcmp(mqtt_topic, key_topic) || !strcmp(Settings.mqtt_grptopic, key_topic)) && (2 == state)) {
state = ~(power >> (device -1)) &1;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), GetStateText(state));
}
#ifdef USE_DOMOTICZ
if (!(DomoticzSendKey(key, device, state, strlen(mqtt_data)))) {
MqttPublishDirect(stopic, (key) ? Settings.flag.mqtt_switch_retain : Settings.flag.mqtt_button_retain);
}
#else
MqttPublishDirect(stopic, (key) ? Settings.flag.mqtt_switch_retain : Settings.flag.mqtt_button_retain);
#endif // USE_DOMOTICZ
result = true;
#ifdef USE_RULES
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"%s%d\":{\"State\":%d}}"), (key) ? "Switch" : "Button", device, state);
result = RulesProcess();
#endif // USE_RULES
}
#ifdef USE_KNX
KnxSendButtonPower(key, device, state);
#endif // USE_KNX
return result;
}
void ExecuteCommandPower(byte device, byte state)
{
// device = Relay number 1 and up
// state 0 = Relay Off
// state 1 = Relay On (turn off after Settings.pulse_timer * 100 mSec if enabled)
// state 2 = Toggle relay
// state 3 = Blink relay
// state 4 = Stop blinking relay
// state 6 = Relay Off and no publishPowerState
// state 7 = Relay On and no publishPowerState
// state 9 = Show power state
uint8_t publish_power = 1;
if ((POWER_OFF_NO_STATE == state) || (POWER_ON_NO_STATE == state)) {
state &= 1;
publish_power = 0;
}
if ((device < 1) || (device > devices_present)) device = 1;
if (device <= MAX_PULSETIMERS) pulse_timer[(device -1)] = 0;
power_t mask = 1 << (device -1);
if (state <= POWER_TOGGLE) {
if ((blink_mask & mask)) {
blink_mask &= (POWER_MASK ^ mask); // Clear device mask
MqttPublishPowerBlinkState(device);
}
if (Settings.flag.interlock && !interlock_mutex) { // Clear all but masked relay
interlock_mutex = 1;
for (byte i = 0; i < devices_present; i++) {
power_t imask = 1 << i;
if ((power & imask) && (mask != imask)) ExecuteCommandPower(i +1, POWER_OFF);
}
interlock_mutex = 0;
}
switch (state) {
case POWER_OFF: {
power &= (POWER_MASK ^ mask);
break; }
case POWER_ON:
power |= mask;
break;
case POWER_TOGGLE:
power ^= mask;
}
SetDevicePower(power);
#ifdef USE_DOMOTICZ
DomoticzUpdatePowerState(device);
#endif // USE_DOMOTICZ
#ifdef USE_KNX
KnxUpdatePowerState(device, power);
#endif // USE_KNX
if (device <= MAX_PULSETIMERS) {
// pulse_timer[(device -1)] = (power & mask) ? Settings.pulse_timer[(device -1)] : 0;
pulse_timer[(device -1)] = (((POWER_ALL_OFF_PULSETIME_ON == Settings.poweronstate) ? ~power : power) & mask) ? Settings.pulse_timer[(device -1)] : 0;
}
}
else if (POWER_BLINK == state) {
if (!(blink_mask & mask)) {
blink_powersave = (blink_powersave & (POWER_MASK ^ mask)) | (power & mask); // Save state
blink_power = (power >> (device -1))&1; // Prep to Toggle
}
blink_timer = 1;
blink_counter = ((!Settings.blinkcount) ? 64000 : (Settings.blinkcount *2)) +1;
blink_mask |= mask; // Set device mask
MqttPublishPowerBlinkState(device);
return;
}
else if (POWER_BLINK_STOP == state) {
byte flag = (blink_mask & mask);
blink_mask &= (POWER_MASK ^ mask); // Clear device mask
MqttPublishPowerBlinkState(device);
if (flag) ExecuteCommandPower(device, (blink_powersave >> (device -1))&1); // Restore state
return;
}
if (publish_power) MqttPublishPowerState(device);
}
void StopAllPowerBlink()
{
power_t mask;
for (byte i = 1; i <= devices_present; i++) {
mask = 1 << (i -1);
if (blink_mask & mask) {
blink_mask &= (POWER_MASK ^ mask); // Clear device mask
MqttPublishPowerBlinkState(i);
ExecuteCommandPower(i, (blink_powersave >> (i -1))&1); // Restore state
}
}
}
void ExecuteCommand(char *cmnd)
{
char stopic[CMDSZ];
char svalue[INPUT_BUFFER_SIZE];
char *start;
char *token;
token = strtok(cmnd, " ");
if (token != NULL) {
start = strrchr(token, '/'); // Skip possible cmnd/sonoff/ preamble
if (start) token = start +1;
}
snprintf_P(stopic, sizeof(stopic), PSTR("/%s"), (token == NULL) ? "" : token);
token = strtok(NULL, "");
// snprintf_P(svalue, sizeof(svalue), (token == NULL) ? "" : token); // Fails with command FullTopic home/%prefix%/%topic% as it processes %p of %prefix%
strlcpy(svalue, (token == NULL) ? "" : token, sizeof(svalue)); // Fixed 5.8.0b
MqttDataHandler(stopic, (byte*)svalue, strlen(svalue));
}
void PublishStatus(uint8_t payload)
{
uint8_t option = 1;
char stemp[MAX_FRIENDLYNAMES * (sizeof(Settings.friendlyname[0]) +4)];
// Workaround MQTT - TCP/IP stack queueing when SUB_PREFIX = PUB_PREFIX
if (!strcmp(Settings.mqtt_prefix[0],Settings.mqtt_prefix[1]) && (!payload)) option++;
if ((!Settings.flag.mqtt_enabled) && (6 == payload)) payload = 99;
if (!energy_flg && (9 == payload)) payload = 99;
if ((0 == payload) || (99 == payload)) {
uint8_t maxfn = (devices_present > MAX_FRIENDLYNAMES) ? MAX_FRIENDLYNAMES : (!devices_present) ? 1 : devices_present;
stemp[0] = '\0';
for (byte i = 0; i < maxfn; i++) {
snprintf_P(stemp, sizeof(stemp), PSTR("%s%s\"%s\"" ), stemp, (i > 0 ? "," : ""), Settings.friendlyname[i]);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS "\":{\"" D_CMND_MODULE "\":%d,\"" D_CMND_FRIENDLYNAME "\":[%s],\"" D_CMND_TOPIC "\":\"%s\",\"" D_CMND_BUTTONTOPIC "\":\"%s\",\"" D_CMND_POWER "\":%d,\"" D_CMND_POWERONSTATE "\":%d,\"" D_CMND_LEDSTATE "\":%d,\"" D_CMND_SAVEDATA "\":%d,\"" D_JSON_SAVESTATE "\":%d,\"" D_CMND_BUTTONRETAIN "\":%d,\"" D_CMND_POWERRETAIN "\":%d}}"),
Settings.module +1, stemp, mqtt_topic, Settings.button_topic, power, Settings.poweronstate, Settings.ledstate, Settings.save_data, Settings.flag.save_state, Settings.flag.mqtt_button_retain, Settings.flag.mqtt_power_retain);
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS));
}
if ((0 == payload) || (1 == payload)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS1_PARAMETER "\":{\"" D_JSON_BAUDRATE "\":%d,\"" D_CMND_GROUPTOPIC "\":\"%s\",\"" D_CMND_OTAURL "\":\"%s\",\"" D_JSON_RESTARTREASON "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\",\"" D_JSON_STARTUPUTC "\":\"%s\",\"" D_CMND_SLEEP "\":%d,\"" D_JSON_BOOTCOUNT "\":%d,\"" D_JSON_SAVECOUNT "\":%d,\"" D_JSON_SAVEADDRESS "\":\"%X\"}}"),
baudrate, Settings.mqtt_grptopic, Settings.ota_url, GetResetReason().c_str(), GetDateAndTime(DT_UPTIME).c_str(), GetDateAndTime(DT_RESTART).c_str(), Settings.sleep, Settings.bootcount, Settings.save_flag, GetSettingsAddress());
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "1"));
}
if ((0 == payload) || (2 == payload)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS2_FIRMWARE "\":{\"" D_JSON_VERSION "\":\"%s\",\"" D_JSON_BUILDDATETIME "\":\"%s\",\"" D_JSON_BOOTVERSION "\":%d,\"" D_JSON_COREVERSION "\":\"" ARDUINO_ESP8266_RELEASE "\",\"" D_JSON_SDKVERSION "\":\"%s\"}}"),
my_version, GetBuildDateAndTime().c_str(), ESP.getBootVersion(), ESP.getSdkVersion());
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "2"));
}
if ((0 == payload) || (3 == payload)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS3_LOGGING "\":{\"" D_CMND_SERIALLOG "\":%d,\"" D_CMND_WEBLOG "\":%d,\"" D_CMND_SYSLOG "\":%d,\"" D_CMND_LOGHOST "\":\"%s\",\"" D_CMND_LOGPORT "\":%d,\"" D_CMND_SSID "\":[\"%s\",\"%s\"],\"" D_CMND_TELEPERIOD "\":%d,\"" D_CMND_SETOPTION "\":[\"%08X\",\"%08X\"]}}"),
Settings.seriallog_level, Settings.weblog_level, Settings.syslog_level, Settings.syslog_host, Settings.syslog_port, Settings.sta_ssid[0], Settings.sta_ssid[1], Settings.tele_period, Settings.flag.data, Settings.flag2.data);
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "3"));
}
if ((0 == payload) || (4 == payload)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS4_MEMORY "\":{\"" D_JSON_PROGRAMSIZE "\":%d,\"" D_JSON_FREEMEMORY "\":%d,\"" D_JSON_HEAPSIZE "\":%d,\"" D_JSON_PROGRAMFLASHSIZE "\":%d,\"" D_JSON_FLASHSIZE "\":%d,\"" D_JSON_FLASHMODE "\":%d}}"),
ESP.getSketchSize()/1024, ESP.getFreeSketchSpace()/1024, ESP.getFreeHeap()/1024, ESP.getFlashChipSize()/1024, ESP.getFlashChipRealSize()/1024, ESP.getFlashChipMode());
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "4"));
}
if ((0 == payload) || (5 == payload)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS5_NETWORK "\":{\"" D_CMND_HOSTNAME "\":\"%s\",\"" D_CMND_IPADDRESS "\":\"%s\",\"" D_JSON_GATEWAY "\":\"%s\",\"" D_JSON_SUBNETMASK "\":\"%s\",\"" D_JSON_DNSSERVER "\":\"%s\",\"" D_JSON_MAC "\":\"%s\",\"" D_CMND_WEBSERVER "\":%d,\"" D_CMND_WIFICONFIG "\":%d}}"),
my_hostname, WiFi.localIP().toString().c_str(), IPAddress(Settings.ip_address[1]).toString().c_str(), IPAddress(Settings.ip_address[2]).toString().c_str(), IPAddress(Settings.ip_address[3]).toString().c_str(),
WiFi.macAddress().c_str(), Settings.webserver, Settings.sta_config);
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "5"));
}
if (((0 == payload) || (6 == payload)) && Settings.flag.mqtt_enabled) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS6_MQTT "\":{\"" D_CMND_MQTTHOST "\":\"%s\",\"" D_CMND_MQTTPORT "\":%d,\"" D_CMND_MQTTCLIENT D_JSON_MASK "\":\"%s\",\"" D_CMND_MQTTCLIENT "\":\"%s\",\"" D_CMND_MQTTUSER "\":\"%s\",\"MqttType\":%d,\"MAX_PACKET_SIZE\":%d,\"KEEPALIVE\":%d}}"),
Settings.mqtt_host, Settings.mqtt_port, Settings.mqtt_client, mqtt_client, Settings.mqtt_user, MqttLibraryType(), MQTT_MAX_PACKET_SIZE, MQTT_KEEPALIVE);
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "6"));
}
if ((0 == payload) || (7 == payload)) {
#if defined(USE_TIMERS) && defined(USE_SUNRISE)
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS7_TIME "\":{\"" D_JSON_UTC_TIME "\":\"%s\",\"" D_JSON_LOCAL_TIME "\":\"%s\",\"" D_JSON_STARTDST "\":\"%s\",\"" D_JSON_ENDDST "\":\"%s\",\"" D_CMND_TIMEZONE "\":%d,\"" D_JSON_SUNRISE "\":\"%s\",\"" D_JSON_SUNSET "\":\"%s\"}}"),
GetTime(0).c_str(), GetTime(1).c_str(), GetTime(2).c_str(), GetTime(3).c_str(), Settings.timezone, GetSun(0).c_str(), GetSun(1).c_str());
#else
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS7_TIME "\":{\"" D_JSON_UTC_TIME "\":\"%s\",\"" D_JSON_LOCAL_TIME "\":\"%s\",\"" D_JSON_STARTDST "\":\"%s\",\"" D_JSON_ENDDST "\":\"%s\",\"" D_CMND_TIMEZONE "\":%d}}"),
GetTime(0).c_str(), GetTime(1).c_str(), GetTime(2).c_str(), GetTime(3).c_str(), Settings.timezone);
#endif // USE_TIMERS and USE_SUNRISE
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "7"));
}
if (energy_flg) {
if ((0 == payload) || (9 == payload)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS9_MARGIN "\":{\"" D_CMND_POWERDELTA "\":%d,\"" D_CMND_POWERLOW "\":%d,\"" D_CMND_POWERHIGH "\":%d,\"" D_CMND_VOLTAGELOW "\":%d,\"" D_CMND_VOLTAGEHIGH "\":%d,\"" D_CMND_CURRENTLOW "\":%d,\"" D_CMND_CURRENTHIGH "\":%d}}"),
Settings.energy_power_delta, Settings.energy_min_power, Settings.energy_max_power, Settings.energy_min_voltage, Settings.energy_max_voltage, Settings.energy_min_current, Settings.energy_max_current);
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "9"));
}
}
if ((0 == payload) || (8 == payload) || (10 == payload)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS10_SENSOR "\":"));
MqttShowSensor();
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
if (8 == payload) {
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "8"));
} else {
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "10"));
}
}
if ((0 == payload) || (11 == payload)) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_STATUS D_STATUS11_STATUS "\":"));
MqttShowState();
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
MqttPublishPrefixTopic_P(option, PSTR(D_CMND_STATUS "11"));
}
}
void MqttShowPWMState()
{
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s\"" D_CMND_PWM "\":{"), mqtt_data);
bool first = true;
for (byte i = 0; i < MAX_PWMS; i++) {
if (pin[GPIO_PWM1 + i] < 99) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s%s\"" D_CMND_PWM "%d\":%d"), mqtt_data, first ? "" : ",", i+1, Settings.pwm_value[i]);
first = false;
}
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
}
void MqttShowState()
{
char stemp1[33];
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s{\"" D_JSON_TIME "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\""), mqtt_data, GetDateAndTime(DT_LOCAL).c_str(), GetDateAndTime(DT_UPTIME).c_str());
#ifdef USE_ADC_VCC
dtostrfd((double)ESP.getVcc()/1000, 3, stemp1);
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"" D_JSON_VCC "\":%s"), mqtt_data, stemp1);
#endif
for (byte i = 0; i < devices_present; i++) {
if (i == light_device -1) {
LightState(1);
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"%s\":\"%s\""), mqtt_data, GetPowerDevice(stemp1, i +1, sizeof(stemp1)), GetStateText(bitRead(power, i)));
}
}
if (pwm_present) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,"), mqtt_data);
MqttShowPWMState();
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"" D_JSON_WIFI "\":{\"" D_JSON_AP "\":%d,\"" D_JSON_SSID "\":\"%s\",\"" D_JSON_RSSI "\":%d,\"" D_JSON_APMAC_ADDRESS "\":\"%s\"}}"),
mqtt_data, Settings.sta_active +1, Settings.sta_ssid[Settings.sta_active], WifiGetRssiAsQuality(WiFi.RSSI()), WiFi.BSSIDstr().c_str());
}
boolean MqttShowSensor()
{
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s{\"" D_JSON_TIME "\":\"%s\""), mqtt_data, GetDateAndTime(DT_LOCAL).c_str());
int json_data_start = strlen(mqtt_data);
for (byte i = 0; i < MAX_SWITCHES; i++) {
if (pin[GPIO_SWT1 +i] < 99) {
boolean swm = ((FOLLOW_INV == Settings.switchmode[i]) || (PUSHBUTTON_INV == Settings.switchmode[i]) || (PUSHBUTTONHOLD_INV == Settings.switchmode[i]));
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"" D_JSON_SWITCH "%d\":\"%s\""), mqtt_data, i +1, GetStateText(swm ^ lastwallswitch[i]));
}
}
XsnsCall(FUNC_JSON_APPEND);
boolean json_data_available = (strlen(mqtt_data) - json_data_start);
if (strstr_P(mqtt_data, PSTR(D_JSON_TEMPERATURE))) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"" D_JSON_TEMPERATURE_UNIT "\":\"%c\""), mqtt_data, TempUnit());
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}"), mqtt_data);
if (json_data_available) XdrvCall(FUNC_SHOW_SENSOR);
return json_data_available;
}
/********************************************************************************************/
void PerformEverySecond()
{
uptime++;
if (blockgpio0) blockgpio0--;
for (byte i = 0; i < MAX_PULSETIMERS; i++) {
if (pulse_timer[i] > 111) pulse_timer[i]--;
}
if (seriallog_timer) {
seriallog_timer--;
if (!seriallog_timer) {
if (seriallog_level) {
AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_APPLICATION D_SERIAL_LOGGING_DISABLED));
}
seriallog_level = 0;
}
}
if (syslog_timer) { // Restore syslog level
syslog_timer--;
if (!syslog_timer) {
syslog_level = (Settings.flag2.emulation) ? 0 : Settings.syslog_level;
if (Settings.syslog_level) {
AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_APPLICATION D_SYSLOG_LOGGING_REENABLED)); // Might trigger disable again (on purpose)
}
}
}
if (status_update_timer) {
status_update_timer--;
if (!status_update_timer) {
for (byte i = 1; i <= devices_present; i++) {
MqttPublishPowerState(i);
}
}
}
if (Settings.tele_period) {
tele_period++;
if (tele_period == Settings.tele_period -1) {
XsnsCall(FUNC_PREP_BEFORE_TELEPERIOD);
}
if (tele_period >= Settings.tele_period) {
tele_period = 0;
mqtt_data[0] = '\0';
MqttShowState();
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_STATE), MQTT_TELE_RETAIN);
mqtt_data[0] = '\0';
if (MqttShowSensor()) {
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_SENSOR), Settings.flag.mqtt_sensor_retain);
#ifdef USE_RULES
RulesTeleperiod(); // Allow rule based HA messages
#endif // USE_RULES
}
}
}
XdrvCall(FUNC_EVERY_SECOND);
XsnsCall(FUNC_EVERY_SECOND);
if ((2 == RtcTime.minute) && latest_uptime_flag) {
latest_uptime_flag = false;
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_TIME "\":\"%s\",\"" D_JSON_UPTIME "\":\"%s\"}"), GetDateAndTime(DT_LOCAL).c_str(), GetDateAndTime(DT_UPTIME).c_str());
MqttPublishPrefixTopic_P(TELE, PSTR(D_RSLT_UPTIME));
}
if ((3 == RtcTime.minute) && !latest_uptime_flag) latest_uptime_flag = true;
}
/*********************************************************************************************\
* Button handler with single press only or multi-press and hold on all buttons
\*********************************************************************************************/
void ButtonHandler()
{
uint8_t button = NOT_PRESSED;
uint8_t button_present = 0;
uint8_t hold_time_extent = IMMINENT_RESET_FACTOR; // Extent hold time factor in case of iminnent Reset command
char scmnd[20];
uint8_t maxdev = (devices_present > MAX_KEYS) ? MAX_KEYS : devices_present;
for (byte button_index = 0; button_index < maxdev; button_index++) {
button = NOT_PRESSED;
button_present = 0;
if (!button_index && ((SONOFF_DUAL == Settings.module) || (CH4 == Settings.module))) {
button_present = 1;
if (dual_button_code) {
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_BUTTON " " D_CODE " %04X"), dual_button_code);
AddLog(LOG_LEVEL_DEBUG);
button = PRESSED;
if (0xF500 == dual_button_code) { // Button hold
holdbutton[button_index] = (Settings.param[P_HOLD_TIME] * (STATES / 10)) -1;
hold_time_extent = 1;
}
dual_button_code = 0;
}
} else {
if ((pin[GPIO_KEY1 +button_index] < 99) && !blockgpio0) {
button_present = 1;
button = digitalRead(pin[GPIO_KEY1 +button_index]);
}
}
if (button_present) {
if (SONOFF_4CHPRO == Settings.module) {
if (holdbutton[button_index]) holdbutton[button_index]--;
boolean button_pressed = false;
if ((PRESSED == button) && (NOT_PRESSED == lastbutton[button_index])) {
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_LEVEL_10), button_index +1);
AddLog(LOG_LEVEL_DEBUG);
holdbutton[button_index] = STATES;
button_pressed = true;
}
if ((NOT_PRESSED == button) && (PRESSED == lastbutton[button_index])) {
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_LEVEL_01), button_index +1);
AddLog(LOG_LEVEL_DEBUG);
if (!holdbutton[button_index]) button_pressed = true; // Do not allow within 1 second
}
if (button_pressed) {
if (!SendKey(0, button_index +1, POWER_TOGGLE)) { // Execute Toggle command via MQTT if ButtonTopic is set
ExecuteCommandPower(button_index +1, POWER_TOGGLE); // Execute Toggle command internally
}
}
} else {
if ((PRESSED == button) && (NOT_PRESSED == lastbutton[button_index])) {
if (Settings.flag.button_single) { // Allow only single button press for immediate action
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_IMMEDIATE), button_index +1);
AddLog(LOG_LEVEL_DEBUG);
if (!SendKey(0, button_index +1, POWER_TOGGLE)) { // Execute Toggle command via MQTT if ButtonTopic is set
ExecuteCommandPower(button_index +1, POWER_TOGGLE); // Execute Toggle command internally
}
} else {
multipress[button_index] = (multiwindow[button_index]) ? multipress[button_index] +1 : 1;
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_MULTI_PRESS " %d"), button_index +1, multipress[button_index]);
AddLog(LOG_LEVEL_DEBUG);
multiwindow[button_index] = STATES /2; // 0.5 second multi press window
}
blinks = 201;
}
if (NOT_PRESSED == button) {
holdbutton[button_index] = 0;
} else {
holdbutton[button_index]++;
if (Settings.flag.button_single) { // Allow only single button press for immediate action
if (holdbutton[button_index] == Settings.param[P_HOLD_TIME] * (STATES / 10) * hold_time_extent) { // Button held for factor times longer
// Settings.flag.button_single = 0;
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_SETOPTION "13 0")); // Disable single press only
ExecuteCommand(scmnd);
}
} else {
if (Settings.flag.button_restrict) { // Button restriction
if (holdbutton[button_index] == Settings.param[P_HOLD_TIME] * (STATES / 10)) { // Button hold
multipress[button_index] = 0;
SendKey(0, button_index +1, 3); // Execute Hold command via MQTT if ButtonTopic is set
}
} else {
if (holdbutton[button_index] == (Settings.param[P_HOLD_TIME] * (STATES / 10)) * hold_time_extent) { // Button held for factor times longer
multipress[button_index] = 0;
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_RESET " 1"));
ExecuteCommand(scmnd);
}
}
}
}
if (!Settings.flag.button_single) { // Allow multi-press
if (multiwindow[button_index]) {
multiwindow[button_index]--;
} else {
if (!restart_flag && !holdbutton[button_index] && (multipress[button_index] > 0) && (multipress[button_index] < MAX_BUTTON_COMMANDS +3)) {
boolean single_press = false;
if (multipress[button_index] < 3) { // Single or Double press
if ((SONOFF_DUAL_R2 == Settings.module) || (SONOFF_DUAL == Settings.module) || (CH4 == Settings.module)) {
single_press = true;
} else {
single_press = (Settings.flag.button_swap +1 == multipress[button_index]);
multipress[button_index] = 1;
}
}
if (single_press && SendKey(0, button_index + multipress[button_index], POWER_TOGGLE)) { // Execute Toggle command via MQTT if ButtonTopic is set
// Success
} else {
if (multipress[button_index] < 3) { // Single or Double press
if (WifiState()) { // WPSconfig, Smartconfig or Wifimanager active
restart_flag = 1;
} else {
ExecuteCommandPower(button_index + multipress[button_index], POWER_TOGGLE); // Execute Toggle command internally
}
} else { // 3 - 7 press
if (!Settings.flag.button_restrict) {
snprintf_P(scmnd, sizeof(scmnd), kCommands[multipress[button_index] -3]);
ExecuteCommand(scmnd);
}
}
}
multipress[button_index] = 0;
}
}
}
}
}
lastbutton[button_index] = button;
}
}
/*********************************************************************************************\
* Switch handler
\*********************************************************************************************/
void SwitchHandler()
{
uint8_t button = NOT_PRESSED;
uint8_t switchflag;
for (byte i = 0; i < MAX_SWITCHES; i++) {
if (pin[GPIO_SWT1 +i] < 99) {
if (holdwallswitch[i]) {
holdwallswitch[i]--;
if (0 == holdwallswitch[i]) {
SendKey(1, i +1, 3); // Execute command via MQTT
}
}
button = digitalRead(pin[GPIO_SWT1 +i]);
if (button != lastwallswitch[i]) {
switchflag = 3;
switch (Settings.switchmode[i]) {
case TOGGLE:
switchflag = 2; // Toggle
break;
case FOLLOW:
switchflag = button &1; // Follow wall switch state
break;
case FOLLOW_INV:
switchflag = ~button &1; // Follow inverted wall switch state
break;
case PUSHBUTTON:
if ((PRESSED == button) && (NOT_PRESSED == lastwallswitch[i])) {
switchflag = 2; // Toggle with pushbutton to Gnd
}
break;
case PUSHBUTTON_INV:
if ((NOT_PRESSED == button) && (PRESSED == lastwallswitch[i])) {
switchflag = 2; // Toggle with releasing pushbutton from Gnd
}
break;
case PUSHBUTTON_TOGGLE:
if (button != lastwallswitch[i]) {
switchflag = 2; // Toggle with any pushbutton change
}
break;
case PUSHBUTTONHOLD:
if ((PRESSED == button) && (NOT_PRESSED == lastwallswitch[i])) {
holdwallswitch[i] = Settings.param[P_HOLD_TIME] * (STATES / 10);
}
if ((NOT_PRESSED == button) && (PRESSED == lastwallswitch[i]) && (holdwallswitch[i])) {
holdwallswitch[i] = 0;
switchflag = 2; // Toggle with pushbutton to Gnd
}
break;
case PUSHBUTTONHOLD_INV:
if ((NOT_PRESSED == button) && (PRESSED == lastwallswitch[i])) {
holdwallswitch[i] = Settings.param[P_HOLD_TIME] * (STATES / 10);
}
if ((PRESSED == button) && (NOT_PRESSED == lastwallswitch[i]) && (holdwallswitch[i])) {
holdwallswitch[i] = 0;
switchflag = 2; // Toggle with pushbutton to Gnd
}
break;
}
if (switchflag < 3) {
if (!SendKey(1, i +1, switchflag)) { // Execute command via MQTT
ExecuteCommandPower(i +1, switchflag); // Execute command internally (if i < devices_present)
}
}
lastwallswitch[i] = button;
}
}
}
}
/*********************************************************************************************\
* State loop
\*********************************************************************************************/
void StateLoop()
{
power_t power_now;
state_loop_timer = millis() + (1000 / STATES);
state++;
/*-------------------------------------------------------------------------------------------*\
* Every second
\*-------------------------------------------------------------------------------------------*/
if (STATES == state) {
state = 0;
PerformEverySecond();
}
/*-------------------------------------------------------------------------------------------*\
* Every 0.1 second
\*-------------------------------------------------------------------------------------------*/
if (!(state % (STATES/10))) {
if (mqtt_cmnd_publish) mqtt_cmnd_publish--; // Clean up
if (latching_relay_pulse) {
latching_relay_pulse--;
if (!latching_relay_pulse) SetLatchingRelay(0, 0);
}
for (byte i = 0; i < MAX_PULSETIMERS; i++) {
if ((pulse_timer[i] > 0) && (pulse_timer[i] < 112)) {
pulse_timer[i]--;
if (!pulse_timer[i]) {
// ExecuteCommandPower(i +1, POWER_OFF);
ExecuteCommandPower(i +1, (POWER_ALL_OFF_PULSETIME_ON == Settings.poweronstate) ? POWER_ON : POWER_OFF);
}
}
}
if (blink_mask) {
blink_timer--;
if (!blink_timer) {
blink_timer = Settings.blinktime;
blink_counter--;
if (!blink_counter) {
StopAllPowerBlink();
} else {
blink_power ^= 1;
power_now = (power & (POWER_MASK ^ blink_mask)) | ((blink_power) ? blink_mask : 0);
SetDevicePower(power_now);
}
}
}
// Backlog
if (backlog_delay) backlog_delay--;
if ((backlog_pointer != backlog_index) && !backlog_delay && !backlog_mutex) {
backlog_mutex = 1;
ExecuteCommand((char*)backlog[backlog_pointer].c_str());
backlog_mutex = 0;
backlog_pointer++;
if (backlog_pointer >= MAX_BACKLOG) backlog_pointer = 0;
}
}
/*-------------------------------------------------------------------------------------------*\
* Every 0.05 second
\*-------------------------------------------------------------------------------------------*/
ButtonHandler();
SwitchHandler();
XdrvCall(FUNC_EVERY_50_MSECOND);
XsnsCall(FUNC_EVERY_50_MSECOND);
/*-------------------------------------------------------------------------------------------*\
* Every 0.2 second
\*-------------------------------------------------------------------------------------------*/
if (!(state % ((STATES/10)*2))) {
if (blinks || restart_flag || ota_state_flag) {
if (restart_flag || ota_state_flag) {
blinkstate = 1; // Stay lit
} else {
blinkstate ^= 1; // Blink
}
if ((!(Settings.ledstate &0x08)) && ((Settings.ledstate &0x06) || (blinks > 200) || (blinkstate))) {
SetLedPower(blinkstate);
}
if (!blinkstate) {
blinks--;
if (200 == blinks) blinks = 0;
}
} else {
if (Settings.ledstate &1) {
boolean tstate = power;
if ((SONOFF_TOUCH == Settings.module) || (SONOFF_T11 == Settings.module) || (SONOFF_T12 == Settings.module) || (SONOFF_T13 == Settings.module)) {
tstate = (!power) ? 1 : 0;
}
SetLedPower(tstate);
}
}
}
/*-------------------------------------------------------------------------------------------*\
* Every second at 0.2 second interval
\*-------------------------------------------------------------------------------------------*/
switch (state) {
case (STATES/10)*2:
if (ota_state_flag && (backlog_pointer == backlog_index)) {
ota_state_flag--;
if (2 == ota_state_flag) {
ota_url = Settings.ota_url;
RtcSettings.ota_loader = 0; // Try requested image first
ota_retry_counter = OTA_ATTEMPTS;
ESPhttpUpdate.rebootOnUpdate(false);
SettingsSave(1); // Free flash for OTA update
}
if (ota_state_flag <= 0) {
#ifdef USE_WEBSERVER
if (Settings.webserver) StopWebserver();
#endif // USE_WEBSERVER
#ifdef USE_ARILUX_RF
AriluxRfDisable(); // Prevent restart exception on Arilux Interrupt routine
#endif // USE_ARILUX_RF
ota_state_flag = 92;
ota_result = 0;
ota_retry_counter--;
if (ota_retry_counter) {
strlcpy(mqtt_data, GetOtaUrl(log_data, sizeof(log_data)), sizeof(mqtt_data));
#ifndef BE_MINIMAL
if (RtcSettings.ota_loader) {
char *pch = strrchr(mqtt_data, '-'); // Change from filename-DE.bin into filename-minimal.bin
char *ech = strrchr(mqtt_data, '.'); // Change from filename.bin into filename-minimal.bin
if (!pch) pch = ech;
if (pch) {
mqtt_data[pch - mqtt_data] = '\0';
char *ech = strrchr(Settings.ota_url, '.'); // Change from filename.bin into filename-minimal.bin
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s-" D_JSON_MINIMAL "%s"), mqtt_data, ech); // Minimal filename must be filename-minimal
}
}
#endif // BE_MINIMAL
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_UPLOAD "%s"), mqtt_data);
AddLog(LOG_LEVEL_DEBUG);
ota_result = (HTTP_UPDATE_FAILED != ESPhttpUpdate.update(mqtt_data));
if (!ota_result) {
#ifndef BE_MINIMAL
int ota_error = ESPhttpUpdate.getLastError();
// snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_UPLOAD "Ota error %d"), ota_error);
// AddLog(LOG_LEVEL_DEBUG);
if ((HTTP_UE_TOO_LESS_SPACE == ota_error) || (HTTP_UE_BIN_FOR_WRONG_FLASH == ota_error)) {
RtcSettings.ota_loader = 1; // Try minimal image next
}
#endif // BE_MINIMAL
ota_state_flag = 2; // Upgrade failed - retry
}
}
}
if (90 == ota_state_flag) { // Allow MQTT to reconnect
ota_state_flag = 0;
if (ota_result) {
SetFlashModeDout(); // Force DOUT for both ESP8266 and ESP8285
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR(D_JSON_SUCCESSFUL ". " D_JSON_RESTARTING));
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR(D_JSON_FAILED " %s"), ESPhttpUpdate.getLastErrorString().c_str());
}
restart_flag = 2; // Restart anyway to keep memory clean webserver
MqttPublishPrefixTopic_P(STAT, PSTR(D_CMND_UPGRADE));
}
}
break;
case (STATES/10)*4:
if (MidnightNow()) CounterSaveState();
if (save_data_counter && (backlog_pointer == backlog_index)) {
save_data_counter--;
if (save_data_counter <= 0) {
if (Settings.flag.save_state) {
power_t mask = POWER_MASK;
for (byte i = 0; i < MAX_PULSETIMERS; i++) {
if ((Settings.pulse_timer[i] > 0) && (Settings.pulse_timer[i] < 30)) { // 3 seconds
mask &= ~(1 << i);
}
}
if (!((Settings.power &mask) == (power &mask))) {
Settings.power = power;
}
} else {
Settings.power = 0;
}
SettingsSave(0);
save_data_counter = Settings.save_data;
}
}
if (restart_flag && (backlog_pointer == backlog_index)) {
if (213 == restart_flag) {
SettingsSdkErase(); // Erase flash SDK parameters
restart_flag = 2;
} else if (212 == restart_flag) {
SettingsErase(0); // Erase all flash from program end to end of physical flash
restart_flag = 211;
}
if (211 == restart_flag) {
SettingsDefault();
restart_flag = 2;
}
SettingsSaveAll();
restart_flag--;
if (restart_flag <= 0) {
AddLog_P(LOG_LEVEL_INFO, PSTR(D_LOG_APPLICATION D_RESTARTING));
ESP.restart();
}
}
break;
case (STATES/10)*6:
WifiCheck(wifi_state_flag);
wifi_state_flag = WIFI_RESTART;
break;
case (STATES/10)*8:
if (WL_CONNECTED == WiFi.status()) MqttCheck();
break;
}
}
#ifdef USE_ARDUINO_OTA
/*********************************************************************************************\
* Allow updating via the Arduino OTA-protocol.
*
* - Once started disables current wifi clients and udp
* - Perform restart when done to re-init wifi clients
\*********************************************************************************************/
bool arduino_ota_triggered = false;
uint16_t arduino_ota_progress_dot_count = 0;
void ArduinoOTAInit()
{
ArduinoOTA.setPort(8266);
ArduinoOTA.setHostname(Settings.hostname);
if (Settings.web_password[0] !=0) ArduinoOTA.setPassword(Settings.web_password);
ArduinoOTA.onStart([]()
{
SettingsSave(1); // Free flash for OTA update
#ifdef USE_WEBSERVER
if (Settings.webserver) StopWebserver();
#endif // USE_WEBSERVER
#ifdef USE_ARILUX_RF
AriluxRfDisable(); // Prevent restart exception on Arilux Interrupt routine
#endif // USE_ARILUX_RF
if (Settings.flag.mqtt_enabled) MqttDisconnect();
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_UPLOAD "Arduino OTA " D_UPLOAD_STARTED));
AddLog(LOG_LEVEL_INFO);
arduino_ota_triggered = true;
arduino_ota_progress_dot_count = 0;
delay(100); // Allow time for message xfer
});
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total)
{
if ((LOG_LEVEL_DEBUG <= seriallog_level)) {
arduino_ota_progress_dot_count++;
Serial.printf(".");
if (!(arduino_ota_progress_dot_count % 80)) Serial.println();
}
});
ArduinoOTA.onError([](ota_error_t error)
{
/*
From ArduinoOTA.h:
typedef enum { OTA_AUTH_ERROR, OTA_BEGIN_ERROR, OTA_CONNECT_ERROR, OTA_RECEIVE_ERROR, OTA_END_ERROR } ota_error_t;
*/
char error_str[100];
if ((LOG_LEVEL_DEBUG <= seriallog_level) && arduino_ota_progress_dot_count) Serial.println();
switch (error) {
case OTA_BEGIN_ERROR: strncpy_P(error_str, PSTR(D_UPLOAD_ERR_2), sizeof(error_str)); break;
case OTA_RECEIVE_ERROR: strncpy_P(error_str, PSTR(D_UPLOAD_ERR_5), sizeof(error_str)); break;
case OTA_END_ERROR: strncpy_P(error_str, PSTR(D_UPLOAD_ERR_7), sizeof(error_str)); break;
default:
snprintf_P(error_str, sizeof(error_str), PSTR(D_UPLOAD_ERROR_CODE " %d"), error);
}
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_UPLOAD "Arduino OTA %s. " D_RESTARTING), error_str);
AddLog(LOG_LEVEL_INFO);
delay(100); // Allow time for message xfer
ESP.restart();
});
ArduinoOTA.onEnd([]()
{
if ((LOG_LEVEL_DEBUG <= seriallog_level)) Serial.println();
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_UPLOAD "Arduino OTA " D_SUCCESSFUL ". " D_RESTARTING));
AddLog(LOG_LEVEL_INFO);
delay(100); // Allow time for message xfer
ESP.restart();
});
ArduinoOTA.begin();
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_UPLOAD "Arduino OTA " D_ENABLED " " D_PORT " 8266"));
AddLog(LOG_LEVEL_INFO);
}
#endif // USE_ARDUINO_OTA
/********************************************************************************************/
void SerialInput()
{
while (Serial.available()) {
yield();
serial_in_byte = Serial.read();
/*-------------------------------------------------------------------------------------------*\
* Sonoff dual and ch4 19200 baud serial interface
\*-------------------------------------------------------------------------------------------*/
if ((SONOFF_DUAL == Settings.module) || (CH4 == Settings.module)) {
if (dual_hex_code) {
dual_hex_code--;
if (dual_hex_code) {
dual_button_code = (dual_button_code << 8) | serial_in_byte;
serial_in_byte = 0;
} else {
if (serial_in_byte != 0xA1) {
dual_button_code = 0; // 0xA1 - End of Sonoff dual button code
}
}
}
if (0xA0 == serial_in_byte) { // 0xA0 - Start of Sonoff dual button code
serial_in_byte = 0;
dual_button_code = 0;
dual_hex_code = 3;
}
}
/*-------------------------------------------------------------------------------------------*\
* Sonoff bridge 19200 baud serial interface
\*-------------------------------------------------------------------------------------------*/
if (SONOFF_BRIDGE == Settings.module) {
if (SonoffBridgeSerialInput()) {
serial_in_byte_counter = 0;
Serial.flush();
return;
}
}
/*-------------------------------------------------------------------------------------------*\
* Sonoff S31 and Sonoff Pow R2 4800 baud serial interface
\*-------------------------------------------------------------------------------------------*/
if ((SONOFF_S31 == Settings.module) || (SONOFF_POW_R2 == Settings.module)) {
if (CseSerialInput()) {
serial_in_byte_counter = 0;
Serial.flush();
return;
}
}
/*-------------------------------------------------------------------------------------------*/
if (serial_in_byte > 127) { // binary data...
serial_in_byte_counter = 0;
Serial.flush();
return;
}
if (!Settings.flag.mqtt_serial) {
if (isprint(serial_in_byte)) {
if (serial_in_byte_counter < INPUT_BUFFER_SIZE -1) { // add char to string if it still fits
serial_in_buffer[serial_in_byte_counter++] = serial_in_byte;
} else {
serial_in_byte_counter = 0;
}
}
} else {
if (serial_in_byte) {
if ((serial_in_byte_counter < INPUT_BUFFER_SIZE -1) && (serial_in_byte != Settings.serial_delimiter)) { // add char to string if it still fits
serial_in_buffer[serial_in_byte_counter++] = serial_in_byte;
serial_polling_window = millis();
} else {
serial_polling_window = 0;
break;
}
}
}
/*-------------------------------------------------------------------------------------------*\
* Sonoff SC 19200 baud serial interface
\*-------------------------------------------------------------------------------------------*/
if (SONOFF_SC == Settings.module) {
if (serial_in_byte == '\x1B') { // Sonoff SC status from ATMEGA328P
serial_in_buffer[serial_in_byte_counter] = 0; // serial data completed
SonoffScSerialInput(serial_in_buffer);
serial_in_byte_counter = 0;
Serial.flush();
return;
}
}
/*-------------------------------------------------------------------------------------------*/
else if (!Settings.flag.mqtt_serial && (serial_in_byte == '\n')) {
serial_in_buffer[serial_in_byte_counter] = 0; // serial data completed
seriallog_level = (Settings.seriallog_level < LOG_LEVEL_INFO) ? (byte)LOG_LEVEL_INFO : Settings.seriallog_level;
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_COMMAND "%s"), serial_in_buffer);
AddLog(LOG_LEVEL_INFO);
ExecuteCommand(serial_in_buffer);
serial_in_byte_counter = 0;
serial_polling_window = 0;
Serial.flush();
return;
}
}
if (Settings.flag.mqtt_serial && serial_in_byte_counter && (millis() > (serial_polling_window + SERIAL_POLLING))) {
serial_in_buffer[serial_in_byte_counter] = 0; // serial data completed
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_SERIALRECEIVED "\":\"%s\"}"), serial_in_buffer);
MqttPublishPrefixTopic_P(RESULT_OR_TELE, PSTR(D_JSON_SERIALRECEIVED));
serial_in_byte_counter = 0;
}
}
/********************************************************************************************/
void GpioInit()
{
uint8_t mpin;
mytmplt def_module;
if (!Settings.module || (Settings.module >= MAXMODULE)) {
Settings.module = MODULE;
Settings.last_module = MODULE;
}
memcpy_P(&def_module, &kModules[Settings.module], sizeof(def_module));
strlcpy(my_module.name, def_module.name, sizeof(my_module.name));
for (byte i = 0; i < MAX_GPIO_PIN; i++) {
if (Settings.my_gp.io[i] > GPIO_NONE) {
my_module.gp.io[i] = Settings.my_gp.io[i];
}
if ((def_module.gp.io[i] > GPIO_NONE) && (def_module.gp.io[i] < GPIO_USER)) {
my_module.gp.io[i] = def_module.gp.io[i];
}
}
for (byte i = 0; i < GPIO_MAX; i++) {
pin[i] = 99;
}
for (byte i = 0; i < MAX_GPIO_PIN; i++) {
mpin = my_module.gp.io[i];
// snprintf_P(log_data, sizeof(log_data), PSTR("DBG: gpio pin %d, mpin %d"), i, mpin);
// AddLog(LOG_LEVEL_DEBUG);
if (mpin) {
if ((mpin >= GPIO_REL1_INV) && (mpin < (GPIO_REL1_INV + MAX_RELAYS))) {
bitSet(rel_inverted, mpin - GPIO_REL1_INV);
mpin -= (GPIO_REL1_INV - GPIO_REL1);
}
else if ((mpin >= GPIO_LED1_INV) && (mpin < (GPIO_LED1_INV + MAX_LEDS))) {
bitSet(led_inverted, mpin - GPIO_LED1_INV);
mpin -= (GPIO_LED1_INV - GPIO_LED1);
}
else if ((mpin >= GPIO_PWM1_INV) && (mpin < (GPIO_PWM1_INV + MAX_PWMS))) {
bitSet(pwm_inverted, mpin - GPIO_PWM1_INV);
mpin -= (GPIO_PWM1_INV - GPIO_PWM1);
}
#ifdef USE_DHT
else if ((mpin >= GPIO_DHT11) && (mpin <= GPIO_SI7021)) {
if (DhtSetup(i, mpin)) {
dht_flg = 1;
mpin = GPIO_DHT11;
} else {
mpin = 0;
}
}
#endif // USE_DHT
}
if (mpin) pin[mpin] = i;
}
if (2 == pin[GPIO_TXD]) Serial.set_tx(2);
analogWriteRange(Settings.pwm_range); // Default is 1023 (Arduino.h)
analogWriteFreq(Settings.pwm_frequency); // Default is 1000 (core_esp8266_wiring_pwm.c)
#ifdef USE_SPI
spi_flg = ((((pin[GPIO_SPI_CS] < 99) && (pin[GPIO_SPI_CS] > 14)) || (pin[GPIO_SPI_CS] < 12)) || (((pin[GPIO_SPI_DC] < 99) && (pin[GPIO_SPI_DC] > 14)) || (pin[GPIO_SPI_DC] < 12)));
if (spi_flg) {
for (byte i = 0; i < GPIO_MAX; i++) {
if ((pin[i] >= 12) && (pin[i] <=14)) pin[i] = 99;
}
my_module.gp.io[12] = GPIO_SPI_MISO;
pin[GPIO_SPI_MISO] = 12;
my_module.gp.io[13] = GPIO_SPI_MOSI;
pin[GPIO_SPI_MOSI] = 13;
my_module.gp.io[14] = GPIO_SPI_CLK;
pin[GPIO_SPI_CLK] = 14;
}
#endif // USE_SPI
#ifdef USE_I2C
i2c_flg = ((pin[GPIO_I2C_SCL] < 99) && (pin[GPIO_I2C_SDA] < 99));
if (i2c_flg) Wire.begin(pin[GPIO_I2C_SDA], pin[GPIO_I2C_SCL]);
#endif // USE_I2C
devices_present = 1;
light_type = LT_BASIC; // Use basic PWM control if SetOption15 = 0
if (Settings.flag.pwm_control) {
for (byte i = 0; i < MAX_PWMS; i++) {
if (pin[GPIO_PWM1 +i] < 99) light_type++; // Use Dimmer/Color control for all PWM as SetOption15 = 1
}
}
if (SONOFF_BRIDGE == Settings.module) {
Settings.flag.mqtt_serial = 0;
baudrate = 19200;
}
if (SONOFF_DUAL == Settings.module) {
Settings.flag.mqtt_serial = 0;
devices_present = 2;
baudrate = 19200;
}
else if (CH4 == Settings.module) {
Settings.flag.mqtt_serial = 0;
devices_present = 4;
baudrate = 19200;
}
else if (SONOFF_SC == Settings.module) {
Settings.flag.mqtt_serial = 0;
devices_present = 0;
baudrate = 19200;
}
else if (SONOFF_BN == Settings.module) { // PWM Single color led (White)
light_type = LT_PWM1;
}
else if (SONOFF_LED == Settings.module) { // PWM Dual color led (White warm and cold)
light_type = LT_PWM2;
}
else if (AILIGHT == Settings.module) { // RGBW led
light_type = LT_RGBW;
}
else if (SONOFF_B1 == Settings.module) { // RGBWC led
light_type = LT_RGBWC;
}
else {
if (!light_type) devices_present = 0;
for (byte i = 0; i < MAX_RELAYS; i++) {
if (pin[GPIO_REL1 +i] < 99) {
pinMode(pin[GPIO_REL1 +i], OUTPUT);
devices_present++;
}
}
}
for (byte i = 0; i < MAX_KEYS; i++) {
if (pin[GPIO_KEY1 +i] < 99) {
pinMode(pin[GPIO_KEY1 +i], (16 == pin[GPIO_KEY1 +i]) ? INPUT_PULLDOWN_16 : INPUT_PULLUP);
}
}
for (byte i = 0; i < MAX_LEDS; i++) {
if (pin[GPIO_LED1 +i] < 99) {
pinMode(pin[GPIO_LED1 +i], OUTPUT);
digitalWrite(pin[GPIO_LED1 +i], bitRead(led_inverted, i));
}
}
for (byte i = 0; i < MAX_SWITCHES; i++) {
if (pin[GPIO_SWT1 +i] < 99) {
pinMode(pin[GPIO_SWT1 +i], (16 == pin[GPIO_SWT1 +i]) ? INPUT_PULLDOWN_16 :INPUT_PULLUP);
lastwallswitch[i] = digitalRead(pin[GPIO_SWT1 +i]); // set global now so doesn't change the saved power state on first switch check
}
}
#ifdef USE_WS2812
if (!light_type && (pin[GPIO_WS2812] < 99)) { // RGB led
devices_present++;
light_type = LT_WS2812;
}
#endif // USE_WS2812
if (!light_type) {
for (byte i = 0; i < MAX_PWMS; i++) { // Basic PWM control only
if (pin[GPIO_PWM1 +i] < 99) {
pwm_present = true;
pinMode(pin[GPIO_PWM1 +i], OUTPUT);
analogWrite(pin[GPIO_PWM1 +i], bitRead(pwm_inverted, i) ? Settings.pwm_range - Settings.pwm_value[i] : Settings.pwm_value[i]);
}
}
}
if (EXS_RELAY == Settings.module) {
SetLatchingRelay(0,2);
SetLatchingRelay(1,2);
}
SetLedPower(Settings.ledstate &8);
XdrvCall(FUNC_INIT);
}
extern "C" {
extern struct rst_info resetInfo;
}
void setup()
{
byte idx;
Serial.begin(baudrate);
delay(10);
Serial.println();
seriallog_level = LOG_LEVEL_INFO; // Allow specific serial messages until config loaded
snprintf_P(my_version, sizeof(my_version), PSTR("%d.%d.%d"), VERSION >> 24 & 0xff, VERSION >> 16 & 0xff, VERSION >> 8 & 0xff);
if (VERSION & 0x1f) {
idx = strlen(my_version);
my_version[idx] = 96 + (VERSION & 0x1f);
my_version[idx +1] = 0;
}
#ifdef BE_MINIMAL
snprintf_P(my_version, sizeof(my_version), PSTR("%s-" D_JSON_MINIMAL), my_version);
#endif // BE_MINIMAL
SettingsLoad();
SettingsDelta();
OsWatchInit();
baudrate = Settings.baudrate * 1200;
seriallog_level = Settings.seriallog_level;
seriallog_timer = SERIALLOG_TIMER;
#ifndef USE_EMULATION
Settings.flag2.emulation = 0;
#endif // USE_EMULATION
syslog_level = (Settings.flag2.emulation) ? 0 : Settings.syslog_level;
stop_flash_rotate = Settings.flag.stop_flash_rotate;
save_data_counter = Settings.save_data;
sleep = Settings.sleep;
Settings.bootcount++;
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_BOOT_COUNT " %d"), Settings.bootcount);
AddLog(LOG_LEVEL_DEBUG);
GpioInit();
SetSerialBaudrate(baudrate);
Format(mqtt_client, Settings.mqtt_client, sizeof(mqtt_client));
Format(mqtt_topic, Settings.mqtt_topic, sizeof(mqtt_topic));
if (strstr(Settings.hostname, "%")) {
strlcpy(Settings.hostname, WIFI_HOSTNAME, sizeof(Settings.hostname));
snprintf_P(my_hostname, sizeof(my_hostname)-1, Settings.hostname, mqtt_topic, ESP.getChipId() & 0x1FFF);
} else {
snprintf_P(my_hostname, sizeof(my_hostname)-1, Settings.hostname);
}
WifiConnect();
if (MOTOR == Settings.module) Settings.poweronstate = POWER_ALL_ON; // Needs always on else in limbo!
if (POWER_ALL_ALWAYS_ON == Settings.poweronstate) {
SetDevicePower(1);
} else {
if ((resetInfo.reason == REASON_DEFAULT_RST) || (resetInfo.reason == REASON_EXT_SYS_RST)) {
switch (Settings.poweronstate) {
case POWER_ALL_OFF:
case POWER_ALL_OFF_PULSETIME_ON:
power = 0;
SetDevicePower(power);
break;
case POWER_ALL_ON: // All on
power = (1 << devices_present) -1;
SetDevicePower(power);
break;
case POWER_ALL_SAVED_TOGGLE:
power = (Settings.power & ((1 << devices_present) -1)) ^ POWER_MASK;
if (Settings.flag.save_state) {
SetDevicePower(power);
}
break;
case POWER_ALL_SAVED:
power = Settings.power & ((1 << devices_present) -1);
if (Settings.flag.save_state) {
SetDevicePower(power);
}
break;
}
} else {
power = Settings.power & ((1 << devices_present) -1);
if (Settings.flag.save_state) {
SetDevicePower(power);
}
}
}
// Issue #526 and #909
for (byte i = 0; i < devices_present; i++) {
if ((i < MAX_RELAYS) && (pin[GPIO_REL1 +i] < 99)) {
bitWrite(power, i, digitalRead(pin[GPIO_REL1 +i]) ^ bitRead(rel_inverted, i));
}
if ((i < MAX_PULSETIMERS) && (bitRead(power, i) || (POWER_ALL_OFF_PULSETIME_ON == Settings.poweronstate))) {
pulse_timer[i] = Settings.pulse_timer[i];
}
}
blink_powersave = power;
snprintf_P(log_data, sizeof(log_data), PSTR(D_PROJECT " %s %s (" D_CMND_TOPIC " %s, " D_FALLBACK " %s, " D_CMND_GROUPTOPIC " %s) " D_VERSION " %s-" ARDUINO_ESP8266_RELEASE),
PROJECT, Settings.friendlyname[0], mqtt_topic, mqtt_client, Settings.mqtt_grptopic, my_version);
AddLog(LOG_LEVEL_INFO);
#ifdef BE_MINIMAL
snprintf_P(log_data, sizeof(log_data), PSTR(D_WARNING_MINIMAL_VERSION));
AddLog(LOG_LEVEL_INFO);
#endif // BE_MINIMAL
RtcInit();
#ifdef USE_ARDUINO_OTA
ArduinoOTAInit();
#endif // USE_ARDUINO_OTA
XsnsCall(FUNC_INIT);
}
void loop()
{
XdrvCall(FUNC_LOOP);
OsWatchLoop();
#ifdef USE_WEBSERVER
PollDnsWebserver();
#ifdef USE_EMULATION
if (Settings.flag2.emulation) PollUdp();
#endif // USE_EMULATION
#endif // USE_WEBSERVER
if (millis() >= state_loop_timer) StateLoop();
SerialInput();
#ifdef USE_ARDUINO_OTA
ArduinoOTA.handle();
// Once OTA is triggered, only handle that and dont do other stuff. (otherwise it fails)
while (arduino_ota_triggered) ArduinoOTA.handle();
#endif // USE_ARDUINO_OTA
// yield(); // yield == delay(0), delay contains yield, auto yield in loop
delay(sleep); // https://github.com/esp8266/Arduino/issues/2021
}