/*
  xsns_08_htu21.ino - HTU21 temperature and humidity sensor support for Sonoff-Tasmota

  Copyright (C) 2019  Heiko Krupp and Theo Arends

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifdef USE_I2C
#ifdef USE_HTU
/*********************************************************************************************\
 * HTU21 - Temperature and Humidy
 *
 * Source: Heiko Krupp
 *
 * I2C Address: 0x40
\*********************************************************************************************/

#define XSNS_08             8

#define HTU21_ADDR          0x40

#define SI7013_CHIPID       0x0D
#define SI7020_CHIPID       0x14
#define SI7021_CHIPID       0x15
#define HTU21_CHIPID        0x32

#define HTU21_READTEMP      0xE3
#define HTU21_READHUM       0xE5
#define HTU21_WRITEREG      0xE6
#define HTU21_READREG       0xE7
#define HTU21_RESET         0xFE
#define HTU21_HEATER_WRITE  0x51
#define HTU21_HEATER_READ   0x11
#define HTU21_SERIAL2_READ1 0xFC    /* Read 3rd two Serial bytes */
#define HTU21_SERIAL2_READ2 0xC9    /* Read 4th two Serial bytes */

#define HTU21_HEATER_ON     0x04
#define HTU21_HEATER_OFF    0xFB

#define HTU21_RES_RH12_T14  0x00  // Default
#define HTU21_RES_RH8_T12   0x01
#define HTU21_RES_RH10_T13  0x80
#define HTU21_RES_RH11_T11  0x81

#define HTU21_CRC8_POLYNOM  0x13100

const char kHtuTypes[] PROGMEM = "HTU21|SI7013|SI7020|SI7021|T/RH?";

uint8_t htu_address;
uint8_t htu_type = 0;
uint8_t htu_delay_temp;
uint8_t htu_delay_humidity = 50;
uint8_t htu_valid = 0;
float htu_temperature = 0;
float htu_humidity = 0;
char htu_types[7];

uint8_t HtuCheckCrc8(uint16_t data)
{
  for (uint8_t bit = 0; bit < 16; bit++) {
    if (data & 0x8000) {
      data =  (data << 1) ^ HTU21_CRC8_POLYNOM;
    } else {
      data <<= 1;
    }
  }
  return data >>= 8;
}

uint8_t HtuReadDeviceId(void)
{
  uint16_t deviceID = 0;
  uint8_t checksum = 0;

  Wire.beginTransmission(HTU21_ADDR);
  Wire.write(HTU21_SERIAL2_READ1);
  Wire.write(HTU21_SERIAL2_READ2);
  Wire.endTransmission();

  Wire.requestFrom(HTU21_ADDR, 3);
  deviceID  = Wire.read() << 8;
  deviceID |= Wire.read();
  checksum  = Wire.read();
  if (HtuCheckCrc8(deviceID) == checksum) {
    deviceID = deviceID >> 8;
  } else {
    deviceID = 0;
  }
  return (uint8_t)deviceID;
}

void HtuSetResolution(uint8_t resolution)
{
  uint8_t current = I2cRead8(HTU21_ADDR, HTU21_READREG);
  current &= 0x7E;          // Replace current resolution bits with 0
  current |= resolution;    // Add new resolution bits to register
  I2cWrite8(HTU21_ADDR, HTU21_WRITEREG, current);
}

void HtuReset(void)
{
  Wire.beginTransmission(HTU21_ADDR);
  Wire.write(HTU21_RESET);
  Wire.endTransmission();
  delay(15);                // Reset takes 15ms
}

void HtuHeater(uint8_t heater)
{
  uint8_t current = I2cRead8(HTU21_ADDR, HTU21_READREG);

  switch(heater)
  {
    case HTU21_HEATER_ON  : current |= heater;
                            break;
    case HTU21_HEATER_OFF : current &= heater;
                            break;
    default               : current &= heater;
                            break;
  }
  I2cWrite8(HTU21_ADDR, HTU21_WRITEREG, current);
}

void HtuInit(void)
{
  HtuReset();
  HtuHeater(HTU21_HEATER_OFF);
  HtuSetResolution(HTU21_RES_RH12_T14);
}

bool HtuRead(void)
{
  uint8_t  checksum = 0;
  uint16_t sensorval = 0;

  if (htu_valid) { htu_valid--; }

  Wire.beginTransmission(HTU21_ADDR);
  Wire.write(HTU21_READTEMP);
  if (Wire.endTransmission() != 0) { return false; }           // In case of error
  delay(htu_delay_temp);                                       // Sensor time at max resolution

  Wire.requestFrom(HTU21_ADDR, 3);
  if (3 == Wire.available()) {
    sensorval = Wire.read() << 8;                              // MSB
    sensorval |= Wire.read();                                  // LSB
    checksum = Wire.read();
  }
  if (HtuCheckCrc8(sensorval) != checksum) { return false; }   // Checksum mismatch

  htu_temperature = ConvertTemp(0.002681 * (float)sensorval - 46.85);

  Wire.beginTransmission(HTU21_ADDR);
  Wire.write(HTU21_READHUM);
  if (Wire.endTransmission() != 0) { return false; }           // In case of error
  delay(htu_delay_humidity);                                   // Sensor time at max resolution

  Wire.requestFrom(HTU21_ADDR, 3);
  if (3 <= Wire.available()) {
    sensorval = Wire.read() << 8;                              // MSB
    sensorval |= Wire.read();                                  // LSB
    checksum = Wire.read();
  }
  if (HtuCheckCrc8(sensorval) != checksum) { return false; }   // Checksum mismatch

  sensorval ^= 0x02;                                           // clear status bits
  htu_humidity = 0.001907 * (float)sensorval - 6;
  if (htu_humidity > 100) { htu_humidity = 100.0; }
  if (htu_humidity < 0) { htu_humidity = 0.01; }

  if ((0.00 == htu_humidity) && (0.00 == htu_temperature)) {
    htu_humidity = 0.0;
  }
  if ((htu_temperature > 0.00) && (htu_temperature < 80.00)) {
    htu_humidity = (-0.15) * (25 - htu_temperature) + htu_humidity;
  }
  ConvertHumidity(htu_humidity);  // Set global humidity

  htu_valid = SENSOR_MAX_MISS;
  return true;
}

/********************************************************************************************/

void HtuDetect(void)
{
  if (htu_type) { return; }

  htu_address = HTU21_ADDR;
  htu_type = HtuReadDeviceId();
  if (htu_type) {
    uint8_t index = 0;
    HtuInit();
    switch (htu_type) {
      case HTU21_CHIPID:
        htu_delay_temp = 50;
        htu_delay_humidity = 16;
        break;
      case SI7021_CHIPID:
        index++;  // 3
      case SI7020_CHIPID:
        index++;  // 2
      case SI7013_CHIPID:
        index++;  // 1
        htu_delay_temp = 12;
        htu_delay_humidity = 23;
        break;
      default:
        index = 4;
        htu_delay_temp = 50;
        htu_delay_humidity = 23;
    }
    GetTextIndexed(htu_types, sizeof(htu_types), index, kHtuTypes);
    AddLog_P2(LOG_LEVEL_DEBUG, S_LOG_I2C_FOUND_AT, htu_types, htu_address);
  }
}

void HtuEverySecond(void)
{
  if (92 == (uptime %100)) {
    // 1mS
    HtuDetect();
  }
  else if (uptime &1) {
    // HTU21: 68mS, SI70xx: 37mS
    if (htu_type) {
      if (!HtuRead()) {
        AddLogMissed(htu_types, htu_valid);
//        if (!htu_valid) { htu_type = 0; }
      }
    }
  }
}

void HtuShow(bool json)
{
  if (htu_valid) {
    char temperature[33];
    dtostrfd(htu_temperature, Settings.flag2.temperature_resolution, temperature);
    char humidity[33];
    dtostrfd(htu_humidity, Settings.flag2.humidity_resolution, humidity);

    if (json) {
      ResponseAppend_P(JSON_SNS_TEMPHUM, htu_types, temperature, humidity);
#ifdef USE_DOMOTICZ
      if (0 == tele_period) {
        DomoticzTempHumSensor(temperature, humidity);
      }
#endif  // USE_DOMOTICZ
#ifdef USE_KNX
      if (0 == tele_period) {
        KnxSensor(KNX_TEMPERATURE, htu_temperature);
        KnxSensor(KNX_HUMIDITY, htu_humidity);
      }
#endif  // USE_KNX
#ifdef USE_WEBSERVER
    } else {
      WSContentSend_PD(HTTP_SNS_TEMP, htu_types, temperature, TempUnit());
      WSContentSend_PD(HTTP_SNS_HUM, htu_types, humidity);
#endif  // USE_WEBSERVER
    }
  }
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xsns08(uint8_t function)
{
  bool result = false;

  if (i2c_flg) {
    switch (function) {
      case FUNC_INIT:
        HtuDetect();
        break;
      case FUNC_EVERY_SECOND:
        HtuEverySecond();
        break;
      case FUNC_JSON_APPEND:
        HtuShow(1);
        break;
#ifdef USE_WEBSERVER
      case FUNC_WEB_SENSOR:
        HtuShow(0);
        break;
#endif  // USE_WEBSERVER
    }
  }
  return result;
}

#endif  // USE_HTU
#endif  // USE_I2C