/* settings.h - setting variables for Tasmota Copyright (C) 2021 Theo Arends This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _SETTINGS_H_ #define _SETTINGS_H_ const uint8_t PARAM8_SIZE = 18; // Number of param bytes (SetOption) typedef union { // Restricted by MISRA-C Rule 18.4 but so useful... uint32_t data; // Allow bit manipulation using SetOption struct { // SetOption0 .. SetOption31 uint32_t save_state : 1; // bit 0 - SetOption0 - (Settings) Save power state (1) and use after restart uint32_t button_restrict : 1; // bit 1 - SetOption1 - (Button) Control button single press (1) or multipress (0) uint32_t ex_value_units : 1; // bit 2 - SetOption2 - (not used) Add units to JSON status messages - removed 6.6.0.21 uint32_t mqtt_enabled : 1; // bit 3 - SetOption3 - (MQTT) Enable (1) uint32_t mqtt_response : 1; // bit 4 - SetOption4 - (MQTT) Switch between RESULT (0) or COMMAND (1) uint32_t mqtt_power_retain : 1; // bit 5 - CMND_POWERRETAIN uint32_t mqtt_button_retain : 1; // bit 6 - CMND_BUTTONRETAIN uint32_t mqtt_switch_retain : 1; // bit 7 - CMND_SWITCHRETAIN uint32_t temperature_conversion : 1; // bit 8 - SetOption8 - (Temperature) Switch between Celsius (0) or Fahrenheit (1) uint32_t mqtt_sensor_retain : 1; // bit 9 - CMND_SENSORRETAIN uint32_t mqtt_offline : 1; // bit 10 - SetOption10 - (MQTT) Control LWT message format, Offline (1) or none (0) uint32_t button_swap : 1; // bit 11 (v5.1.6) - SetOption11 - (Button) Swap (1) button single and double press functionality uint32_t stop_flash_rotate : 1; // bit 12 (v5.2.0) - SetOption12 - (Settings) Switch between dynamic (0) or fixed (1) slot flash save location uint32_t button_single : 1; // bit 13 (v5.4.0) - SetOption13 - (Button) Support only single press (1) to speed up button press recognition uint32_t interlock : 1; // bit 14 (v5.6.0) - CMND_INTERLOCK - Enable (1) /disable (0) interlock uint32_t pwm_control : 1; // bit 15 (v5.8.1) - SetOption15 - (Light) Switch between commands PWM (1) or COLOR/DIMMER/CT/CHANNEL (0) uint32_t ws_clock_reverse : 1; // bit 16 (v5.8.1) - SetOption16 - (WS2812) Switch between clockwise (0) or counter-clockwise (1) uint32_t decimal_text : 1; // bit 17 (v5.8.1) - SetOption17 - (Light) Switch between decimal (1) or hexadecimal (0) output uint32_t light_signal : 1; // bit 18 (v5.10.0c) - SetOption18 - (Light) Pair light signal (1) with CO2 sensor uint32_t hass_discovery : 1; // bit 19 (v5.11.1a) - SetOption19 - (HAss) Control automatic discovery (1) (See SetOption59) uint32_t not_power_linked : 1; // bit 20 (v5.11.1f) - SetOption20 - (Light) Control power in relation to Dimmer/Color/Ct changes (1) uint32_t no_power_on_check : 1; // bit 21 (v5.11.1i) - SetOption21 - (Energy) Show voltage even if powered off (1) uint32_t mqtt_serial : 1; // bit 22 (v5.12.0f) - CMND_SERIALSEND and CMND_SERIALLOG uint32_t mqtt_serial_raw : 1; // bit 23 (v6.1.1c) - CMND_SERIALSEND3 uint32_t pressure_conversion : 1; // bit 24 (v6.3.0.2) - SetOption24 - (Pressure) switch between hPa (0)or mmHg (1) unit uint32_t knx_enabled : 1; // bit 25 (v5.12.0l) - CMND_KNX_ENABLED uint32_t device_index_enable : 1; // bit 26 (v5.13.1a) - SetOption26 - (MQTT, HAss) Switch between POWER (0) or POWER1 (1) uint32_t knx_enable_enhancement : 1; // bit 27 (v5.14.0a) - CMND_KNX_ENHANCED uint32_t rf_receive_decimal : 1; // bit 28 (v6.0.0a) - SetOption28 - (RF) Receive data format hexadecimal (0) or decimal (1) uint32_t ir_receive_decimal : 1; // bit 29 (v6.0.0a) - SetOption29 - (IR) Receive data format hexadecimal (0) or decimal (1) uint32_t hass_light : 1; // bit 30 (v6.0.0b) - SetOption30 - (HAss) enforce autodiscovery as light (1) uint32_t global_state : 1; // bit 31 (v6.1.0) - SetOption31 - (Wifi, MQTT) Control link led blinking (1) }; } SysBitfield; typedef union { // Restricted by MISRA-C Rule 18.4 but so useful... uint32_t data; // Allow bit manipulation using SetOption struct { // SetOption50 .. SetOption81 uint32_t timers_enable : 1; // bit 0 (v6.1.1b) - CMND_TIMERS uint32_t user_esp8285_enable : 1; // bit 1 (v6.1.1.14) - SetOption51 - (GPIO) Enable ESP8285 user GPIO's (1) uint32_t time_append_timezone : 1; // bit 2 (v6.2.1.2) - SetOption52 - (Time) Append timezone to JSON time (1) uint32_t gui_hostname_ip : 1; // bit 3 (v6.2.1.20) - SetOption53 - (GUI) Show hostname and IP address in GUI main menu (1) uint32_t tuya_apply_o20 : 1; // bit 4 (v6.3.0.4) - SetOption54 - (Tuya) Apply SetOption20 settings to Tuya device (1) uint32_t mdns_enabled : 1; // bit 5 (v6.4.1.4) - SetOption55 - (mDNS) Service on (1) or off (0) uint32_t use_wifi_scan : 1; // bit 6 (v6.3.0.10) - SetOption56 - (Wifi) Scan network at restart for configured AP's (1) or used stored AP (0) uint32_t use_wifi_rescan : 1; // bit 7 (v6.3.0.10) - SetOption57 - (Wifi) Scan network every 44 minutes for configured AP's (1) uint32_t receive_raw : 1; // bit 8 (v6.3.0.11) - SetOption58 - (IR) Add IR Raw data to JSON message (1) uint32_t hass_tele_on_power : 1; // bit 9 (v6.3.0.13) - SetOption59 - (MQTT) Send tele/%topic%/STATE in addition to stat/%topic%/RESULT (1) uint32_t sleep_normal : 1; // bit 10 (v6.3.0.15) - SetOption60 - (Sleep) Enable normal sleep (1) instead of dynamic sleep (0) uint32_t button_switch_force_local : 1;// bit 11 (v6.3.0.16) - SetOption61 - (Button, Switch) Force local operation (1) when button/switch topic is set uint32_t no_hold_retain : 1; // bit 12 (v6.4.1.19) - SetOption62 - (MQTT) Don't use retain flag on HOLD messages (1) uint32_t no_power_feedback : 1; // bit 13 (v6.5.0.9) - SetOption63 - (Power) Don't scan relay power state at restart (1) uint32_t use_underscore : 1; // bit 14 (v6.5.0.12) - SetOption64 - (JSON) Enable "_" (1) instead of "-" (0) as sensor index separator uint32_t fast_power_cycle_disable : 1; // bit 15 (v6.6.0.20) - SetOption65 - (QPC) Disable (1) fast power cycle detection for device reset uint32_t tuya_serial_mqtt_publish : 1; // bit 16 (v6.6.0.21) - SetOption66 - (Tuya) Enable (1) TuyaMcuReceived messages over Mqtt uint32_t buzzer_enable : 1; // bit 17 (v6.6.0.1) - SetOption67 - (Buzzer) Enable (1) buzzer when available uint32_t pwm_multi_channels : 1; // bit 18 (v6.6.0.3) - SetOption68 - (Light) Enable multi-channels PWM (1) instead of Color PWM (0) uint32_t ex_tuya_dimmer_min_limit : 1; // bit 19 (v6.6.0.5) - SetOption69 - (not used) Limits Tuya dimmers to minimum of 10% (25) when enabled uint32_t energy_weekend : 1; // bit 20 (v6.6.0.8) - CMND_TARIFF uint32_t dds2382_model : 1; // bit 21 (v6.6.0.14) - SetOption71 - (DDS2382) Select different Modbus registers (1) for Active Energy (#6531) uint32_t hardware_energy_total : 1; // bit 22 (v6.6.0.15) - SetOption72 - (Energy) Enable (1) hardware energy total counter as reference (#6561) uint32_t mqtt_buttons : 1; // bit 23 (v8.2.0.3) - SetOption73 - (Button) Detach buttons from relays (1) and enable MQTT action state for multipress uint32_t ds18x20_internal_pullup : 1; // bit 24 (v7.0.0.1) - SetOption74 - (DS18x20) Enable internal pullup (1) for single DS18x20 sensor uint32_t grouptopic_mode : 1; // bit 25 (v7.0.0.1) - SetOption75 - (MQTT) GroupTopic replaces %topic% (0) or fixed topic cmnd/grouptopic (1) uint32_t bootcount_update : 1; // bit 26 (v7.0.0.4) - SetOption76 - (Deepsleep) Enable incrementing bootcount (1) when deepsleep is enabled uint32_t slider_dimmer_stay_on : 1; // bit 27 (v7.0.0.6) - SetOption77 - (Light) Do not power off (1) if slider moved to far left uint32_t ex_compatibility_check : 1; // bit 28 (v7.1.2.6) - SetOption78 - (not used) Disable OTA compatibility check uint32_t counter_reset_on_tele : 1; // bit 29 (v8.1.0.1) - SetOption79 - (Counter) Enable resetting of counters (1) after telemetry was sent uint32_t shutter_mode : 1; // bit 30 (v6.6.0.14) - SetOption80 - (Shutter) Enable shutter support (1) uint32_t pcf8574_ports_inverted : 1; // bit 31 (v6.6.0.14) - SetOption81 - (PCF8574) Invert all ports on PCF8574 devices (1) }; } SysBitfield3; typedef union { // Restricted by MISRA-C Rule 18.4 but so useful... uint32_t data; // Allow bit manipulation using SetOption struct { // SetOption82 .. SetOption113 uint32_t alexa_ct_range : 1; // bit 0 (v8.1.0.2) - SetOption82 - (Alexa) Reduced CT range for Alexa (1) uint32_t zigbee_use_names : 1; // bit 1 (v8.1.0.4) - SetOption83 - (Zigbee) Use FriendlyNames (1) instead of ShortAddresses (0) when possible uint32_t awsiot_shadow : 1; // bit 2 (v8.1.0.5) - SetOption84 - (AWS IoT) publish MQTT state to a device shadow (1) uint32_t device_groups_enabled : 1; // bit 3 (v8.1.0.9) - SetOption85 - (DevGroups) Enable Device Groups (1) uint32_t led_timeout : 1; // bit 4 (v8.1.0.9) - SetOption86 - (PWM Dimmer) Turn brightness LED's off (1) 5 seconds after last change uint32_t powered_off_led : 1; // bit 5 (v8.1.0.9) - SetOption87 - (PWM Dimmer) Turn red LED on (1) when powered off uint32_t multiple_device_groups : 1; // bit 6 (v8.1.0.9) - SetOption88 - (DevGroups) Enable relays in separate device groups/PWM Dimmer Buttons control remote devices (1) uint32_t zigbee_distinct_topics : 1; // bit 7 (v8.1.0.10) - SetOption89 - (MQTT, Zigbee) Distinct MQTT topics per device for Zigbee (1) (#7835) uint32_t only_json_message : 1; // bit 8 (v8.2.0.3) - SetOption90 - (MQTT) Disable non-json MQTT response (1) uint32_t fade_at_startup : 1; // bit 9 (v8.2.0.3) - SetOption91 - (Light) Enable light fading at start/power on (1) uint32_t pwm_ct_mode : 1; // bit 10 (v8.2.0.4) - SetOption92 - (Light) Set PWM Mode from regular PWM (0) to ColorTemp (1) control (Xiaomi Philips ...) uint32_t compress_rules_cpu : 1; // bit 11 (v8.2.0.6) - SetOption93 - (Compress) Keep uncompressed rules in memory to avoid CPU load of uncompressing at each tick (1) uint32_t max6675 : 1; // bit 12 (v8.3.1.2) - SetOption94 - (MAXxxx) Implement simpler MAX6675 protocol (1) instead of MAX31855 (0) uint32_t network_wifi : 1; // bit 13 (v8.3.1.3) - CMND_WIFI uint32_t network_ethernet : 1; // bit 14 (v8.3.1.3) - CMND_ETHERNET uint32_t tuyamcu_baudrate : 1; // bit 15 (v8.3.1.6) - SetOption97 - (Tuya) Set Baud rate for TuyaMCU serial communication to 9600 (0) or 115200 (1) uint32_t rotary_uses_rules : 1; // bit 16 (v8.3.1.6) - SetOption98 - (Rotary) Use rules (1) instead of light control (0) uint32_t zerocross_dimmer : 1; // bit 17 (v8.3.1.4) - SetOption99 - (PWM Dimmer) Enable zerocross dimmer (1) uint32_t remove_zbreceived : 1; // bit 18 (v8.3.1.7) - SetOption100 - (Zigbee) Remove ZbReceived form JSON message (1) uint32_t zb_index_ep : 1; // bit 19 (v8.3.1.7) - SetOption101 - (Zigbee) Add the source endpoint as suffix to attributes, ex `Power3` (1) instead of `Power` (0) if sent from endpoint 3 uint32_t teleinfo_baudrate : 1; // bit 20 (v8.4.0.1) - SetOption102 - (Teleinfo) Set Baud rate for Teleinfo communication to 1200 (0) or 9600 (1) uint32_t mqtt_tls : 1; // bit 21 (v8.4.0.1) - SetOption103 - (MQTT TLS) Enable TLS mode (1) (requires TLS version) uint32_t mqtt_no_retain : 1; // bit 22 (v8.4.0.1) - SetOption104 - (MQTT) No Retain (1) - disable all MQTT retained messages, some brokers don't support it: AWS IoT, Losant uint32_t white_blend_mode : 1; // bit 23 (v8.4.0.1) - SetOption105 - (Light) White Blend Mode (1) - used to be `RGBWWTable` last value `0`, now deprecated in favor of this option uint32_t virtual_ct : 1; // bit 24 (v8.4.0.1) - SetOption106 - (Light) Virtual CT (1) - Creates a virtual White ColorTemp for RGBW lights uint32_t virtual_ct_cw : 1; // bit 25 (v8.4.0.1) - SetOption107 - (Light) Virtual CT Channel (1) - signals whether the hardware white is cold CW (true) or warm WW (false) uint32_t teleinfo_rawdata : 1; // bit 26 (v8.4.0.2) - SetOption108 - (Teleinfo) Enable Teleinfo + Tasmota Energy device (0) or Teleinfo raw data only (1) uint32_t alexa_gen_1 : 1; // bit 27 (v8.4.0.3) - SetOption109 - (Alexa) Gen1 mode (1) - if you only have Echo Dot 2nd gen devices uint32_t zb_disable_autobind : 1; // bit 28 (v8.5.0.1) - SetOption110 - (Zigbee) Disable auto-config (1) when pairing new devices uint32_t buzzer_freq_mode : 1; // bit 29 (v8.5.0.1) - SetOption111 - (Buzzer) Use frequency output (1) for buzzer pin instead of on/off signal (0) uint32_t zb_topic_fname : 1; // bit 30 (v8.5.0.1) - SetOption112 - (Zigbee) Use friendly name in zigbee topic (1) (use with SetOption89) uint32_t rotary_poweron_dimlow : 1; // bit 31 (v9.0.0.2) - SetOption113 - (Rotary) Set dimmer low on rotary dial after power off (1) }; } SysBitfield4; typedef union { // Restricted by MISRA-C Rule 18.4 but so useful... uint32_t data; // Allow bit manipulation using SetOption struct { // SetOption114 .. SetOption145 uint32_t mqtt_switches : 1; // bit 0 (v9.0.0.3) - SetOption114 - (Switch) Detach Switches from relays and enable MQTT action state for all the SwitchModes (1) uint32_t mi32_enable : 1; // bit 1 (v9.1.0.1) - SetOption115 - (ESP32 BLE) Enable ESP32 MI32 BLE (1) uint32_t zb_disable_autoquery : 1; // bit 2 (v9.1.0.1) - SetOption116 - (Zigbee) Disable auto-query of zigbee lights and devices (1) uint32_t fade_fixed_duration : 1; // bit 3 (v9.1.0.2) - SetOption117 - (Light) run fading at fixed duration instead of fixed slew rate uint32_t zb_received_as_subtopic : 1; // bit 4 (v9.2.0.3) - SetOption118 - (Zigbee) Move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default uint32_t zb_omit_json_addr : 1; // bit 5 (v9.2.0.3) - SetOption119 - (Zigbee) Remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic uint32_t zb_topic_endpoint : 1; // bit 6 (v9.2.0.4) - SetOption120 - (Zigbee) Append endpoint number to topic if device dependent (use with SetOption89) uint32_t mqtt_state_retain : 1; // bit 7 (v9.3.0.1) - CMND_STATERETAIN uint32_t mqtt_info_retain : 1; // bit 8 (v9.3.0.1) - CMND_INFORETAIN uint32_t spare09 : 1; // bit 9 uint32_t spare10 : 1; // bit 10 uint32_t spare11 : 1; // bit 11 uint32_t spare12 : 1; // bit 12 uint32_t spare13 : 1; // bit 13 uint32_t spare14 : 1; // bit 14 uint32_t spare15 : 1; // bit 15 uint32_t spare16 : 1; // bit 16 uint32_t spare17 : 1; // bit 17 uint32_t spare18 : 1; // bit 18 uint32_t spare19 : 1; // bit 19 uint32_t spare20 : 1; // bit 20 uint32_t spare21 : 1; // bit 21 uint32_t spare22 : 1; // bit 22 uint32_t spare23 : 1; // bit 23 uint32_t spare24 : 1; // bit 24 uint32_t spare25 : 1; // bit 25 uint32_t spare26 : 1; // bit 26 uint32_t spare27 : 1; // bit 27 uint32_t spare28 : 1; // bit 28 uint32_t spare29 : 1; // bit 29 uint32_t spare30 : 1; // bit 30 uint32_t spare31 : 1; // bit 31 }; } SysBitfield5; typedef union { uint32_t data; // Allow bit manipulation struct { uint32_t spare00 : 1; uint32_t speed_conversion : 3; // (v8.1.0.10) - Tx2x sensor uint32_t time_format : 2; // (v6.6.0.9) - CMND_TIME uint32_t calc_resolution : 3; uint32_t weight_resolution : 2; uint32_t frequency_resolution : 2; uint32_t axis_resolution : 2; uint32_t current_resolution : 2; uint32_t voltage_resolution : 2; uint32_t wattage_resolution : 2; uint32_t emulation : 2; uint32_t energy_resolution : 3; uint32_t pressure_resolution : 2; uint32_t humidity_resolution : 2; uint32_t temperature_resolution : 2; }; } SysBitfield2; typedef union { uint16_t data; struct { uint16_t hemis : 1; // bit 0 = 0=Northern, 1=Southern Hemisphere (=Opposite DST/STD) uint16_t week : 3; // bits 1 - 3 = 0=Last week of the month, 1=First, 2=Second, 3=Third, 4=Fourth uint16_t month : 4; // bits 4 - 7 = 1=Jan, 2=Feb, ... 12=Dec uint16_t dow : 3; // bits 8 - 10 = day of week, 1=Sun, 2=Mon, ... 7=Sat uint16_t hour : 5; // bits 11 - 15 = 0-23 }; } TimeRule; typedef union { uint32_t data; struct { uint32_t time : 11; // bits 0 - 10 = minutes in a day uint32_t window : 4; // bits 11 - 14 = minutes random window uint32_t repeat : 1; // bit 15 uint32_t days : 7; // bits 16 - 22 = week day mask uint32_t device : 4; // bits 23 - 26 = 16 devices uint32_t power : 2; // bits 27 - 28 = 4 power states - Off, On, Toggle, Blink or Rule uint32_t mode : 2; // bits 29 - 30 = timer modes - 0 = Scheduler, 1 = Sunrise, 2 = Sunset uint32_t arm : 1; // bit 31 }; } Timer; typedef union { // Restricted by MISRA-C Rule 18.4 but so useful... uint32_t data; struct { uint32_t stream : 1; uint32_t mirror : 1; uint32_t flip : 1; uint32_t rtsp : 1; uint32_t spare4 : 1; uint32_t spare5 : 1; uint32_t spare6 : 1; uint32_t spare7 : 1; uint32_t spare8 : 1; uint32_t spare9 : 1; uint32_t spare10 : 1; uint32_t spare11 : 1; uint32_t spare12 : 1; uint32_t spare13 : 1; uint32_t spare14 : 1; uint32_t spare15 : 1; uint32_t spare16 : 1; uint32_t spare17 : 1; uint32_t spare18 : 1; uint32_t contrast : 3; uint32_t brightness : 3; uint32_t saturation : 3; uint32_t resolution : 4; }; } WebCamCfg; typedef union { uint16_t data; struct { uint16_t pinmode : 3; // Pin mode (1 through 6) uint16_t pullup : 1; // Enable internal weak pull-up resistor uint16_t saved_state : 1; // Save output state, if used. uint16_t int_report_mode : 2; // Interrupt reporting mode 0 = immediate telemetry & event, 1 = immediate event only, 2 = immediate telemetry only uint16_t int_report_defer : 4; // Number of interrupts to ignore until reporting (default 0, max 15) uint16_t int_count_en : 1; // Enable interrupt counter for this pin uint16_t int_retain_flag : 1; // Report if interrupt occured for pin in next teleperiod uint16_t spare13 : 1; uint16_t spare14 : 1; uint16_t spare15 : 1; }; } Mcp230xxCfg; typedef union { uint8_t data; struct { uint8_t spare0 : 1; uint8_t spare1 : 1; uint8_t bh1750_2_resolution : 2; uint8_t bh1750_1_resolution : 2; // Sensor10 1,2,3 uint8_t hx711_json_weight_change : 1; // Sensor34 8,x - Enable JSON message on weight change uint8_t mhz19b_abc_disable : 1; // Disable ABC (Automatic Baseline Correction for MHZ19(B) (0 = Enabled (default), 1 = Disabled with Sensor15 command) }; } SensorCfg1; typedef union { uint8_t data; struct { uint8_t pwm_count : 3; // Number of PWMs to use for light uint8_t spare3 : 1; uint8_t spare4 : 1; uint8_t spare5 : 1; uint8_t spare6 : 1; uint8_t spare7 : 1; }; } PWMDimmerCfg; typedef union { uint8_t data; struct { uint8_t nf_autotune : 1; // Autotune the NF Noise Level uint8_t dist_autotune : 1; // Autotune Disturber on/off uint8_t nf_autotune_both : 1; // Autotune over both Areas: INDOORS/OUDOORS uint8_t mqtt_only_Light_Event : 1; // mqtt only if lightning Irq uint8_t suppress_irq_no_Event : 1; // suppress mqtt "IRQ with no Event". (Chip Bug) uint8_t spare5 : 1; uint8_t spare6 : 1; uint8_t spare7 : 1; }; } As3935IntCfg; typedef union { uint16_t data; struct { uint16_t nf_autotune_time : 4; // NF Noise Autotune Time uint16_t dist_autotune_time : 4; // Disturber Autotune Time uint16_t nf_autotune_min : 4; // Min Stages uint16_t spare3 : 4; }; } As3935Param; typedef struct { uint32_t usage1_kWhtotal; uint32_t usage2_kWhtotal; uint32_t return1_kWhtotal; uint32_t return2_kWhtotal; uint32_t last_return_kWhtotal; uint32_t last_usage_kWhtotal; } EnergyUsage; typedef struct { uint8_t fnid = 0; uint8_t dpid = 0; } TuyaFnidDpidMap; typedef union { uint8_t data; struct { uint8_t ilimode : 3; uint8_t Invert : 1; uint8_t spare2 : 1; uint8_t spare3 : 1; uint8_t spare4 : 1; uint8_t spare5 : 1; }; } DisplayOptions; const uint32_t settings_text_size = 699; // Settings.text_pool[size] = Settings.display_model (2D2) - Settings.text_pool (017) const uint8_t MAX_TUYA_FUNCTIONS = 16; struct { uint16_t cfg_holder; // 000 v6 header uint16_t cfg_size; // 002 unsigned long save_flag; // 004 unsigned long version; // 008 uint16_t bootcount; // 00C uint16_t cfg_crc; // 00E SysBitfield flag; // 010 int16_t save_data; // 014 int8_t timezone; // 016 // Start of char array storing all parameter strings ******** char text_pool[138]; // 017 Size is settings_text_size char ex_sta_ssid[2][33]; // 0A1 char ex_sta_pwd[2][65]; // 0E3 uint8_t text_pool_165[132]; // 165 char ex_mqtt_host[33]; // 1E9 uint8_t text_pool_20A[35]; // 20A char ex_mqtt_user[33]; // 22D char ex_mqtt_pwd[33]; // 24E char ex_mqtt_topic[33]; // 26F uint8_t text_pool_290[66]; // 290 // End of single char array of 698 chars max **************** uint8_t display_model; // 2D2 uint8_t display_mode; // 2D3 uint8_t display_refresh; // 2D4 uint8_t display_rows; // 2D5 uint8_t display_cols[2]; // 2D6 uint8_t display_address[8]; // 2D8 uint8_t display_dimmer; // 2E0 uint8_t display_size; // 2E1 TimeRule tflag[2]; // 2E2 uint16_t pwm_frequency; // 2E6 power_t power; // 2E8 uint16_t pwm_value[MAX_PWMS]; // 2EC int16_t altitude; // 2F6 uint16_t tele_period; // 2F8 uint8_t display_rotate; // 2FA uint8_t ledstate; // 2FB uint8_t param[PARAM8_SIZE]; // 2FC SetOption32 .. SetOption49 int16_t toffset[2]; // 30E uint8_t display_font; // 312 DisplayOptions display_options; // 313 uint8_t free_314[43]; // 314 uint8_t tuyamcu_topic; // 33F Manage tuyaSend topic. ex_energy_power_delta on 6.6.0.20, replaced on 8.5.0.1 uint16_t domoticz_update_timer; // 340 uint16_t pwm_range; // 342 unsigned long domoticz_relay_idx[MAX_DOMOTICZ_IDX]; // 344 unsigned long domoticz_key_idx[MAX_DOMOTICZ_IDX]; // 354 unsigned long energy_power_calibration; // 364 unsigned long energy_voltage_calibration; // 368 unsigned long energy_current_calibration; // 36C unsigned long energy_kWhtoday; // 370 unsigned long energy_kWhyesterday; // 374 uint16_t energy_kWhdoy; // 378 uint16_t energy_min_power; // 37A uint16_t energy_max_power; // 37C uint16_t energy_min_voltage; // 37E uint16_t energy_max_voltage; // 380 uint16_t energy_min_current; // 382 uint16_t energy_max_current; // 384 uint16_t energy_max_power_limit; // 386 MaxPowerLimit uint16_t energy_max_power_limit_hold; // 388 MaxPowerLimitHold uint16_t energy_max_power_limit_window; // 38A MaxPowerLimitWindow uint16_t energy_max_power_safe_limit; // 38C MaxSafePowerLimit uint16_t energy_max_power_safe_limit_hold; // 38E MaxSafePowerLimitHold uint16_t energy_max_power_safe_limit_window; // 390 MaxSafePowerLimitWindow uint16_t energy_max_energy; // 392 MaxEnergy uint16_t energy_max_energy_start; // 394 MaxEnergyStart uint16_t mqtt_retry; // 396 uint8_t poweronstate; // 398 uint8_t last_module; // 399 uint16_t blinktime; // 39A uint16_t blinkcount; // 39C uint16_t light_rotation; // 39E SysBitfield3 flag3; // 3A0 uint8_t ex_switchmode[8]; // 3A4 - Free since 9.2.0.6 myio my_gp; // 3AC 2 x 18 bytes (ESP8266) / 2 x 40 bytes (ESP32) #ifdef ESP8266 uint16_t gpio16_converted; // 3D0 uint8_t free_esp8266_3D2[42]; // 3D2 #endif mytmplt user_template; // 3FC 2 x 15 bytes (ESP8266) / 2 x 37 bytes (ESP32) #ifdef ESP8266 uint8_t free_esp8266_41A[55]; // 41A #endif // ESP8266 #ifdef ESP32 uint8_t eth_type; // 446 uint8_t eth_clk_mode; // 447 uint8_t free_esp32_448[4]; // 448 WebCamCfg webcam_config; // 44C uint8_t eth_address; // 450 #endif // ESP32 char serial_delimiter; // 451 uint8_t seriallog_level; // 452 uint8_t sleep; // 453 uint16_t domoticz_switch_idx[MAX_DOMOTICZ_IDX]; // 454 uint16_t domoticz_sensor_idx[MAX_DOMOTICZ_SNS_IDX]; // 45C uint8_t module; // 474 uint8_t ws_color[4][3]; // 475 uint8_t ws_width[3]; // 481 #ifdef ESP8266 myio8 ex_my_gp8; // 484 17 bytes (ESP8266) - Free since 9.0.0.1 #endif // ESP8266 #ifdef ESP32 uint8_t free_esp32_484[17]; // 484 #endif // ESP32 uint8_t ex_my_adc0; // 495 Free since 9.0.0.1 uint16_t light_pixels; // 496 uint8_t light_color[5]; // 498 uint8_t light_correction; // 49D uint8_t light_dimmer; // 49E uint8_t rule_enabled; // 49F uint8_t rule_once; // 4A0 Bit 6+7 used by xdrv_10_scripter uint8_t light_fade; // 4A1 uint8_t light_speed; // 4A2 uint8_t light_scheme; // 4A3 uint8_t light_width; // 4A4 uint8_t knx_GA_registered; // 4A5 Number of Group Address to read uint16_t light_wakeup; // 4A6 uint8_t knx_CB_registered; // 4A8 Number of Group Address to write uint8_t switchmode[MAX_SWITCHES_SET]; // 4A9 uint8_t free_4c5[5]; // 4C5 uint8_t ex_interlock[4]; // 4CA MAX_INTERLOCKS = MAX_RELAYS / 2 (Legacy) uint8_t free_4ce[2]; // 4CE power_t interlock[MAX_INTERLOCKS_SET]; // 4D0 MAX_INTERLOCKS = MAX_RELAYS / 2 uint8_t free_508[41]; // 508 uint8_t ina219_mode; // 531 uint16_t pulse_timer[MAX_PULSETIMERS]; // 532 uint16_t button_debounce; // 542 uint32_t ipv4_address[4]; // 544 unsigned long energy_kWhtotal; // 554 uint8_t free_558[100]; // 558 SysBitfield2 flag2; // 5BC unsigned long pulse_counter[MAX_COUNTERS]; // 5C0 uint16_t pulse_counter_type; // 5D0 uint16_t pulse_counter_debounce; // 5D2 uint8_t rf_code[17][9]; // 5D4 uint8_t timezone_minutes; // 66D uint16_t switch_debounce; // 66E Timer timer[MAX_TIMERS]; // 670 int latitude; // 6B0 int longitude; // 6B4 uint16_t knx_physsical_addr; // 6B8 (address_t is a uint16_t) uint16_t knx_GA_addr[MAX_KNX_GA]; // 6BA (address_t is a uint16_t) x KNX_max_GA uint16_t knx_CB_addr[MAX_KNX_CB]; // 6CE (address_t is a uint16_t) x KNX_max_CB uint8_t knx_GA_param[MAX_KNX_GA]; // 6E2 Type of Input (relay changed, button pressed, sensor read <-teleperiod) uint8_t knx_CB_param[MAX_KNX_CB]; // 6EC Type of Output (set relay, toggle relay, reply sensor value) Mcp230xxCfg mcp230xx_config[16]; // 6F6 uint8_t mcp230xx_int_prio; // 716 SensorCfg1 SensorBits1; // 717 On/Off settings used by Sensor Commands uint16_t mcp230xx_int_timer; // 718 uint8_t rgbwwTable[5]; // 71A uint8_t user_template_base; // 71F char user_template_name[15]; // 720 15 bytes - Backward compatibility since v8.2.0.3 #ifdef ESP8266 mytmplt8285 ex_user_template8; // 72F 14 bytes (ESP8266) - Free since 9.0.0.1 #endif // ESP8266 #ifdef ESP32 uint8_t free_esp32_72f[14]; // 72F #endif // ESP32 uint8_t novasds_startingoffset; // 73D uint8_t web_color[18][3]; // 73E uint16_t display_width; // 774 uint16_t display_height; // 776 uint16_t baudrate; // 778 uint16_t sbaudrate; // 77A EnergyUsage energy_usage; // 77C uint32_t ex_adc_param1; // 794 Free since 9.0.0.1 uint32_t ex_adc_param2; // 798 Free since 9.0.0.1 int ex_adc_param3; // 79C Free since 9.0.0.1 uint32_t monitors; // 7A0 uint32_t sensors[3]; // 7A4 Normal WebSensor, Debug SetSensor uint32_t displays; // 7B0 uint32_t energy_kWhtotal_time; // 7B4 unsigned long weight_item; // 7B8 Weight of one item in gram * 10 uint16_t ledmask; // 7BC uint16_t weight_max; // 7BE Total max weight in kilogram unsigned long weight_reference; // 7C0 Reference weight in gram unsigned long weight_calibration; // 7C4 unsigned long energy_frequency_calibration; // 7C8 Also used by HX711 to save last weight uint16_t web_refresh; // 7CC char script_pram[5][10]; // 7CE char rules[MAX_RULE_SETS][MAX_RULE_SIZE]; // 800 Uses 512 bytes in v5.12.0m, 3 x 512 bytes in v5.14.0b TuyaFnidDpidMap tuya_fnid_map[MAX_TUYA_FUNCTIONS]; // E00 32 bytes uint16_t ina226_r_shunt[4]; // E20 uint16_t ina226_i_fs[4]; // E28 uint16_t tariff[4][2]; // E30 uint16_t shutter_opentime[MAX_SHUTTERS]; // E40 uint16_t shutter_closetime[MAX_SHUTTERS]; // E48 int16_t shuttercoeff[5][MAX_SHUTTERS]; // E50 uint8_t shutter_options[MAX_SHUTTERS]; // E78 uint8_t shutter_set50percent[MAX_SHUTTERS]; // E7C uint8_t shutter_position[MAX_SHUTTERS]; // E80 uint8_t shutter_startrelay[MAX_SHUTTERS]; // E84 uint8_t pcf8574_config[MAX_PCF8574]; // E88 uint8_t ot_hot_water_setpoint; // E8C uint8_t ot_boiler_setpoint; // E8D uint8_t ot_flags; // E8E uint8_t ledpwm_mask; // E8F uint16_t dimmer_hw_min; // E90 uint16_t dimmer_hw_max; // E92 uint32_t deepsleep; // E94 uint16_t hass_new_discovery; // E98 ex2_energy_power_delta on 8.4.0.3, replaced on 8.5.0.1 uint8_t shutter_motordelay[MAX_SHUTTERS]; // E9A int8_t temp_comp; // E9E uint8_t weight_change; // E9F uint8_t web_color2[2][3]; // EA0 Needs to be on integer / 3 distance from web_color uint8_t free_ea6[33]; // EA6 uint8_t sta_config; // EC7 uint8_t sta_active; // EC8 uint8_t rule_stop; // EC9 uint16_t syslog_port; // ECA uint8_t syslog_level; // ECC uint8_t webserver; // ECD uint8_t weblog_level; // ECE uint8_t mqtt_fingerprint[2][20]; // ECF uint8_t ex_adc_param_type; // EF7 Free since 9.0.0.1 SysBitfield4 flag4; // EF8 uint16_t mqtt_port; // EFC uint8_t serial_config; // EFE uint8_t wifi_output_power; // EFF uint8_t shutter_accuracy; // F00 uint8_t mqttlog_level; // F01 uint8_t sps30_inuse_hours; // F02 uint8_t hotplug_scan; // F03 uint8_t bri_power_on; // F04 PWMDimmerCfg pwm_dimmer_cfg; // F05 uint8_t bri_preset_low; // F06 uint8_t bri_preset_high; // F07 int8_t hum_comp; // F08 uint8_t wifi_channel; // F09 uint8_t wifi_bssid[6]; // F0A uint8_t as3935_sensor_cfg[5]; // F10 As3935IntCfg as3935_functions; // F15 As3935Param as3935_parameter; // F16 uint64_t zb_ext_panid; // F18 uint64_t zb_precfgkey_l; // F20 uint64_t zb_precfgkey_h; // F28 uint16_t zb_pan_id; // F30 uint8_t zb_channel; // F32 int8_t zb_txradio_dbm; // F33 uint16_t pms_wake_interval; // F34 uint8_t config_version; // F36 uint8_t windmeter_pulses_x_rot; // F37 uint16_t windmeter_radius; // F38 uint16_t windmeter_pulse_debounce; // F3A int16_t windmeter_speed_factor; // F3C uint8_t windmeter_tele_pchange; // F3E uint8_t ledpwm_on; // F3F uint8_t ledpwm_off; // F40 uint8_t tcp_baudrate; // F41 uint8_t fallback_module; // F42 uint8_t shutter_mode; // F43 uint16_t energy_power_delta[3]; // F44 uint16_t shutter_pwmrange[2][MAX_SHUTTERS]; // F4A uint8_t dimmer_step; // F5A uint8_t shd_leading_edge; // F5B uint16_t shd_warmup_brightness; // F5C uint8_t shd_warmup_time; // F5E uint8_t free_f5e[72]; // F5E - Decrement if adding new Setting variables just above and below // Only 32 bit boundary variables below uint64_t rf_protocol_mask; // FA8 uint8_t device_group_tie[4]; // FB0 SysBitfield5 flag5; // FB4 uint16_t pulse_counter_debounce_low; // FB8 uint16_t pulse_counter_debounce_high; // FBA uint32_t keeloq_master_msb; // FBC uint32_t keeloq_master_lsb; // FC0 uint32_t keeloq_serial; // FC4 uint32_t keeloq_count; // FC8 uint32_t device_group_share_in; // FCC Bitmask of device group items imported uint32_t device_group_share_out; // FD0 Bitmask of device group items exported uint32_t bootcount_reset_time; // FD4 int ex_adc_param4; // FD8 Free since 9.0.0.1 uint32_t shutter_button[MAX_SHUTTER_KEYS]; // FDC uint32_t i2c_drivers[3]; // FEC I2cDriver uint32_t cfg_timestamp; // FF8 uint32_t cfg_crc32; // FFC } Settings; typedef struct { uint16_t valid; // 280 (RTC memory offset 100 - sizeof(RTCRBT)) uint8_t fast_reboot_count; // 282 uint8_t free_003[1]; // 283 } TRtcReboot; TRtcReboot RtcReboot; #ifdef ESP32 RTC_NOINIT_ATTR TRtcReboot RtcDataReboot; #endif // ESP32 typedef struct { uint16_t valid; // 290 (RTC memory offset 100) uint8_t oswatch_blocked_loop; // 292 uint8_t ota_loader; // 293 unsigned long energy_kWhtoday; // 294 unsigned long energy_kWhtotal; // 298 volatile unsigned long pulse_counter[MAX_COUNTERS]; // 29C - See #9521 why volatile power_t power; // 2AC EnergyUsage energy_usage; // 2B0 unsigned long nextwakeup; // 2C8 uint32_t baudrate; // 2CC uint32_t ultradeepsleep; // 2D0 uint16_t deepsleep_slip; // 2D4 uint8_t free_2d6[22]; // 2D6 // 2EC - 2FF free locations } TRtcSettings; TRtcSettings RtcSettings; #ifdef ESP32 RTC_NOINIT_ATTR TRtcSettings RtcDataSettings; #endif // ESP32 struct TIME_T { uint8_t second; uint8_t minute; uint8_t hour; uint8_t day_of_week; // sunday is day 1 uint8_t day_of_month; uint8_t month; char name_of_month[4]; uint16_t day_of_year; uint16_t year; unsigned long days; unsigned long valid; } RtcTime; struct XDRVMAILBOX { bool grpflg; bool usridx; uint16_t command_code; uint32_t index; uint32_t data_len; int32_t payload; char *topic; char *data; char *command; } XdrvMailbox; #ifdef USE_SHUTTER const uint8_t MAX_RULES_FLAG = 11; // Number of bits used in RulesBitfield (tricky I know...) #else const uint8_t MAX_RULES_FLAG = 9; // Number of bits used in RulesBitfield (tricky I know...) #endif // USE_SHUTTER typedef union { // Restricted by MISRA-C Rule 18.4 but so useful... uint16_t data; // Allow bit manipulation struct { uint16_t system_init : 1; // Changing layout here needs adjustments in xdrv_10_rules.ino too uint16_t system_boot : 1; uint16_t time_init : 1; uint16_t time_set : 1; uint16_t mqtt_connected : 1; uint16_t mqtt_disconnected : 1; uint16_t wifi_connected : 1; uint16_t wifi_disconnected : 1; uint16_t http_init : 1; uint16_t shutter_moved : 1; uint16_t shutter_moving : 1; uint16_t spare11 : 1; uint16_t spare12 : 1; uint16_t spare13 : 1; uint16_t spare14 : 1; uint16_t spare15 : 1; }; } RulesBitfield; typedef union { uint8_t data; struct { uint8_t network_down : 1; uint8_t mqtt_down : 1; uint8_t wifi_down : 1; uint8_t eth_down : 1; uint8_t spare04 : 1; uint8_t spare05 : 1; uint8_t spare06 : 1; uint8_t spare07 : 1; }; } StateBitfield; // See issue https://github.com/esp8266/Arduino/issues/2913 #ifdef ESP8266 #ifdef USE_ADC_VCC ADC_MODE(ADC_VCC); // Set ADC input for Power Supply Voltage usage #endif #endif #endif // _SETTINGS_H_