Class for handling detailed Haier ACYRW02 A/C messages. More...

#include <ir_Haier.h>

Collaboration diagram for IRHaierACYRW02:

Public Member Functions
	IRHaierACYRW02 (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	send (const uint16_t repeat=kHaierAcYrw02DefaultRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	setButton (const uint8_t button)
	Set the Button/Command setting of the A/C. More...

uint8_t	getButton (void) const
	Get the Button/Command setting of the A/C. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp (void) const
	Get the current temperature setting. More...

void	setFan (const uint8_t speed)
	Set the speed of the fan. More...

uint8_t	getFan (void) const
	Get the current fan speed setting. More...

uint8_t	getMode (void) const
	Get the operating mode setting of the A/C. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

bool	getPower (void) const
	Get the value of the current power setting. More...

void	setPower (const bool on)
	Change the power setting. More...

void	on (void)
	Change the power setting to On. More...

void	off (void)
	Change the power setting to Off. More...

bool	getSleep (void) const
	Get the Sleep setting of the A/C. More...

void	setSleep (const bool on)
	Set the Sleep setting of the A/C. More...

bool	getHealth (void) const
	Get the Health (filter) setting of the A/C. More...

void	setHealth (const bool on)
	Set the Health (filter) setting of the A/C. More...

uint8_t	getTurbo (void) const
	Get the Turbo setting of the A/C. More...

void	setTurbo (const uint8_t speed)
	Set the Turbo setting of the A/C. More...

uint8_t	getSwing (void) const
	Get the Vertical Swing position setting of the A/C. More...

void	setSwing (const uint8_t pos)
	Set the Vertical Swing mode of the A/C. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t new_code[])
	Set the internal state from a valid code for this protocol. More...

stdAc::state_t	toCommon (void) const
	Convert the current internal state into its stdAc::state_t equivalent. More...

String	toString (void) const
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static bool	validChecksum (uint8_t state[], const uint16_t length=kHaierACYRW02StateLength)
	Verify the checksum is valid for a given state. More...

static uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

static uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

static uint8_t	convertSwingV (const stdAc::swingv_t position)
	Convert a stdAc::swingv_t enum into it's native setting. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivalent. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivalent. More...

static stdAc::swingv_t	toCommonSwingV (const uint8_t pos)
	Convert a stdAc::swingv_t enum into it's native setting. More...

Private Member Functions
void	stateReset (void)
	Reset the internal state to a fixed known good state. More...

void	checksum (void)
	Calculate and set the checksum values for the internal state. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

HaierYRW02Protocol	_

Detailed Description

Class for handling detailed Haier ACYRW02 A/C messages.

Constructor & Destructor Documentation

◆ IRHaierACYRW02()

IRHaierACYRW02::IRHaierACYRW02	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRHaierACYRW02::begin ( void )

Set up hardware to be able to send a message.

◆ calibrate()

int8_t IRHaierACYRW02::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRHaierACYRW02::checksum ( void )

private

Calculate and set the checksum values for the internal state.

◆ convertFan()

uint8_t IRHaierACYRW02::convertFan ( const stdAc::fanspeed_t speed )

static

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRHaierACYRW02::convertMode ( const stdAc::opmode_t mode )

static

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertSwingV()

uint8_t IRHaierACYRW02::convertSwingV ( const stdAc::swingv_t position )

static

Convert a stdAc::swingv_t enum into it's native setting.

Parameters

[in] position The enum to be converted.

Returns: The native equivalent of the enum.

◆ getButton()

uint8_t IRHaierACYRW02::getButton ( void ) const

Get the Button/Command setting of the A/C.

Returns: The value of the button/command that was pressed.

◆ getFan()

uint8_t IRHaierACYRW02::getFan ( void ) const

Get the current fan speed setting.

Returns: The current fan speed.

◆ getHealth()

bool IRHaierACYRW02::getHealth ( void ) const

Get the Health (filter) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRHaierACYRW02::getMode ( void ) const

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getPower()

bool IRHaierACYRW02::getPower ( void ) const

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRHaierACYRW02::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSleep()

bool IRHaierACYRW02::getSleep ( void ) const

Get the Sleep setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwing()

uint8_t IRHaierACYRW02::getSwing ( void ) const

Get the Vertical Swing position setting of the A/C.

Returns: The native position/mode.

◆ getTemp()

uint8_t IRHaierACYRW02::getTemp ( void ) const

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTurbo()

uint8_t IRHaierACYRW02::getTurbo ( void ) const

Get the Turbo setting of the A/C.

Returns: The current turbo speed setting.

◆ off()

void IRHaierACYRW02::off ( void )

Change the power setting to Off.

◆ on()

void IRHaierACYRW02::on ( void )

Change the power setting to On.

◆ send()

void IRHaierACYRW02::send ( const uint16_t repeat = kHaierAcYrw02DefaultRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setButton()

void IRHaierACYRW02::setButton ( const uint8_t button )

Set the Button/Command setting of the A/C.

Parameters

[in] button The value of the button/command that was pressed.

◆ setFan()

void IRHaierACYRW02::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired setting.

◆ setHealth()

void IRHaierACYRW02::setHealth ( const bool on )

Set the Health (filter) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRHaierACYRW02::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setPower()

void IRHaierACYRW02::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRHaierACYRW02::setRaw ( const uint8_t new_code[] )

Set the internal state from a valid code for this protocol.

Parameters

[in] new_code A valid code for this protocol.

◆ setSleep()

void IRHaierACYRW02::setSleep ( const bool on )

Set the Sleep setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwing()

void IRHaierACYRW02::setSwing ( const uint8_t pos )

Set the Vertical Swing mode of the A/C.

Parameters

[in] pos The position/mode to set the vanes to.

◆ setTemp()

void IRHaierACYRW02::setTemp ( const uint8_t celsius )

Set the temperature.

Parameters

[in] celsius The temperature in degrees celsius.

◆ setTurbo()

void IRHaierACYRW02::setTurbo ( const uint8_t speed )

Set the Turbo setting of the A/C.

Parameters

[in] speed The desired turbo speed setting.

Note: Valid speeds are kHaierAcYrw02TurboOff, kHaierAcYrw02TurboLow, & kHaierAcYrw02TurboHigh.

◆ stateReset()

void IRHaierACYRW02::stateReset ( void )

private

Reset the internal state to a fixed known good state.

◆ toCommon()

stdAc::state_t IRHaierACYRW02::toCommon ( void ) const

Convert the current internal state into its stdAc::state_t equivalent.

Returns: The stdAc equivalent of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRHaierACYRW02::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRHaierACYRW02::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivalent.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonSwingV()

stdAc::swingv_t IRHaierACYRW02::toCommonSwingV ( const uint8_t pos )

static

Convert a stdAc::swingv_t enum into it's native setting.

Parameters

[in] pos The enum to be converted.

Returns: The native equivalent of the enum.

◆ toString()

String IRHaierACYRW02::toString ( void ) const

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRHaierACYRW02::validChecksum	(	uint8_t	state[],
		const uint16_t	length = `kHaierACYRW02StateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length of the state array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _

HaierYRW02Protocol IRHaierACYRW02::_

private

◆ _irsend

IRsend IRHaierACYRW02::_irsend

private

Instance of the IR send class.

The documentation for this class was generated from the following files:

src/ir_Haier.h
src/ir_Haier.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRHaierACYRW02()

Member Function Documentation

◆ begin()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ convertSwingV()

◆ getButton()

◆ getFan()

◆ getHealth()

◆ getMode()

◆ getPower()

◆ getRaw()

◆ getSleep()

◆ getSwing()

◆ getTemp()

◆ getTurbo()

◆ off()

◆ on()

◆ send()

◆ setButton()

◆ setFan()

◆ setHealth()

◆ setMode()

◆ setPower()

◆ setRaw()

◆ setSleep()

◆ setSwing()

◆ setTemp()

◆ setTurbo()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toCommonSwingV()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _

◆ _irsend