Class for handling detailed Hitachi 104-bit A/C messages. More...

#include <ir_Hitachi.h>

Collaboration diagram for IRHitachiAc1:

Public Member Functions
	IRHitachiAc1 (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the internal state to a fixed known good state. More...

void	send (const uint16_t repeat=kHitachiAcDefaultRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	on (void)
	Change the power setting to On. More...

void	off (void)
	Change the power setting to Off. More...

void	setModel (const hitachi_ac1_remote_model_t model)
	Set the model of the A/C to emulate. More...

hitachi_ac1_remote_model_t	getModel (void) const
	Get/Detect the model of the A/C. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void) const
	Get the value of the current power setting. More...

void	setPowerToggle (const bool on)
	Change the power toggle setting. More...

bool	getPowerToggle (void) const
	Get the value of the current power toggle setting. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp (void) const
	Get the current temperature setting. More...

void	setFan (const uint8_t speed, const bool force=false)
	Set the speed of the fan. More...

uint8_t	getFan (void) const
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void) const
	Get the operating mode setting of the A/C. More...

void	setSwingToggle (const bool toggle)
	Set the Swing toggle setting of the A/C. More...

bool	getSwingToggle (void) const
	Get the Swing Toggle setting of the A/C. More...

void	setSwingV (const bool on)
	Set the Vertical Swing setting of the A/C. More...

bool	getSwingV (void) const
	Get the Vertical Swing setting of the A/C. More...

void	setSwingH (const bool on)
	Set the Horizontal Swing setting of the A/C. More...

bool	getSwingH (void) const
	Get the Horizontal Swing setting of the A/C. More...

void	setSleep (const uint8_t mode)
	Set the Sleep setting of the A/C. More...

uint8_t	getSleep (void) const
	Get the Sleep setting of the A/C. More...

void	setOnTimer (const uint16_t mins)
	Set the On Timer time. More...

uint16_t	getOnTimer (void) const
	Get the On Timer vtime of the A/C. More...

void	setOffTimer (const uint16_t mins)
	Set the Off Timer time. More...

uint16_t	getOffTimer (void) const
	Get the Off Timer vtime of the A/C. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t new_code[], const uint16_t length=kHitachiAc1StateLength)
	Set the internal state from a valid code for this protocol. More...

stdAc::state_t	toCommon (void) const
	Convert the current internal state into its stdAc::state_t equivalent. More...

String	toString (void) const
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static bool	validChecksum (const uint8_t state[], const uint16_t length=kHitachiAc1StateLength)
	Verify the checksum is valid for a given state. More...

static uint8_t	calcChecksum (const uint8_t state[], const uint16_t length=kHitachiAc1StateLength)
	Calculate the checksum for a given state. More...

static uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

static uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivalent. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivalent. More...

Private Member Functions
void	checksum (const uint16_t length=kHitachiAc1StateLength)
	Calculate and set the checksum values for the internal state. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

Hitachi1Protocol	_

Detailed Description

Class for handling detailed Hitachi 104-bit A/C messages.

See also: https://github.com/crankyoldgit/IRremoteESP8266/issues/1056

Constructor & Destructor Documentation

◆ IRHitachiAc1()

IRHitachiAc1::IRHitachiAc1	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRHitachiAc1::begin ( void )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRHitachiAc1::calcChecksum	(	const uint8_t	state[],
		const uint16_t	length = `kHitachiAc1StateLength`
	)

static

Calculate the checksum for a given state.

Parameters

[in]	state	The value to calc the checksum of.
[in]	length	The size/length of the state.

Returns: The calculated checksum value.

◆ calibrate()

int8_t IRHitachiAc1::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRHitachiAc1::checksum ( const uint16_t length = kHitachiAc1StateLength )

private

Calculate and set the checksum values for the internal state.

Parameters

[in] length The size/length of the state.

◆ convertFan()

uint8_t IRHitachiAc1::convertFan ( const stdAc::fanspeed_t speed )

static

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRHitachiAc1::convertMode ( const stdAc::opmode_t mode )

static

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivalent of the enum.

◆ getFan()

uint8_t IRHitachiAc1::getFan ( void ) const

Get the current fan speed setting.

Returns: The current fan speed.

◆ getMode()

uint8_t IRHitachiAc1::getMode ( void ) const

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getModel()

hitachi_ac1_remote_model_t IRHitachiAc1::getModel ( void ) const

Get/Detect the model of the A/C.

Returns: The enum of the compatible model.

◆ getOffTimer()

uint16_t IRHitachiAc1::getOffTimer ( void ) const

Get the Off Timer vtime of the A/C.

Returns: Nr of minutes the timer is set to.

◆ getOnTimer()

uint16_t IRHitachiAc1::getOnTimer ( void ) const

Get the On Timer vtime of the A/C.

Returns: Nr of minutes the timer is set to.

◆ getPower()

bool IRHitachiAc1::getPower ( void ) const

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getPowerToggle()

bool IRHitachiAc1::getPowerToggle ( void ) const

Get the value of the current power toggle setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRHitachiAc1::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSleep()

uint8_t IRHitachiAc1::getSleep ( void ) const

Get the Sleep setting of the A/C.

Returns: The currently configured sleep mode.

Note: Sleep modes only available in Auto & Cool modes, otherwise it's off.

◆ getSwingH()

bool IRHitachiAc1::getSwingH ( void ) const

Get the Horizontal Swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwingToggle()

bool IRHitachiAc1::getSwingToggle ( void ) const

Get the Swing Toggle setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwingV()

bool IRHitachiAc1::getSwingV ( void ) const

Get the Vertical Swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRHitachiAc1::getTemp ( void ) const

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ off()

void IRHitachiAc1::off ( void )

Change the power setting to Off.

◆ on()

void IRHitachiAc1::on ( void )

Change the power setting to On.

◆ send()

void IRHitachiAc1::send ( const uint16_t repeat = kHitachiAcDefaultRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setFan()

void IRHitachiAc1::setFan	(	const uint8_t	speed,
		const bool	force = `false`
	)

Set the speed of the fan.

Parameters

[in]	speed	The desired setting.
[in]	force	Deprecated

◆ setMode()

void IRHitachiAc1::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setModel()

void IRHitachiAc1::setModel ( const hitachi_ac1_remote_model_t model )

Set the model of the A/C to emulate.

Parameters

[in] model The enum of the appropriate model.

◆ setOffTimer()

void IRHitachiAc1::setOffTimer ( const uint16_t mins )

Set the Off Timer time.

Parameters

[in] mins The time expressed in total number of minutes.

◆ setOnTimer()

void IRHitachiAc1::setOnTimer ( const uint16_t mins )

Set the On Timer time.

Parameters

[in] mins The time expressed in total number of minutes.

◆ setPower()

void IRHitachiAc1::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setPowerToggle()

void IRHitachiAc1::setPowerToggle ( const bool on )

Change the power toggle setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRHitachiAc1::setRaw	(	const uint8_t	new_code[],
		const uint16_t	length = `kHitachiAc1StateLength`
	)

Set the internal state from a valid code for this protocol.

Parameters

[in]	new_code	A valid code for this protocol.
[in]	length	The length of the new_code array.

◆ setSleep()

void IRHitachiAc1::setSleep ( const uint8_t mode )

Set the Sleep setting of the A/C.

Parameters

[in] mode The mode of sleep to set the A/C to.

Note: Sleep modes only available in Auto & Cool modes, otherwise it's off.

◆ setSwingH()

void IRHitachiAc1::setSwingH ( const bool on )

Set the Horizontal Swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwingToggle()

void IRHitachiAc1::setSwingToggle ( const bool toggle )

Set the Swing toggle setting of the A/C.

Parameters

[in] toggle true, the setting is on. false, the setting is off.

◆ setSwingV()

void IRHitachiAc1::setSwingV ( const bool on )

Set the Vertical Swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRHitachiAc1::setTemp ( const uint8_t celsius )

Set the temperature.

Parameters

[in] celsius The temperature in degrees celsius.

◆ stateReset()

void IRHitachiAc1::stateReset ( void )

Reset the internal state to a fixed known good state.

◆ toCommon()

stdAc::state_t IRHitachiAc1::toCommon ( void ) const

Convert the current internal state into its stdAc::state_t equivalent.

Returns: The stdAc equivalent of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRHitachiAc1::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRHitachiAc1::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivalent.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toString()

String IRHitachiAc1::toString ( void ) const

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRHitachiAc1::validChecksum	(	const uint8_t	state[],
		const uint16_t	length = `kHitachiAc1StateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length of the state array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _

Hitachi1Protocol IRHitachiAc1::_

private

◆ _irsend

IRsend IRHitachiAc1::_irsend

private

Instance of the IR send class.

The documentation for this class was generated from the following files:

src/ir_Hitachi.h
src/ir_Hitachi.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRHitachiAc1()

Member Function Documentation

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ getFan()

◆ getMode()

◆ getModel()

◆ getOffTimer()

◆ getOnTimer()

◆ getPower()

◆ getPowerToggle()

◆ getRaw()

◆ getSleep()

◆ getSwingH()

◆ getSwingToggle()

◆ getSwingV()

◆ getTemp()

◆ off()

◆ on()

◆ send()

◆ setFan()

◆ setMode()

◆ setModel()

◆ setOffTimer()

◆ setOnTimer()

◆ setPower()

◆ setPowerToggle()

◆ setRaw()

◆ setSleep()

◆ setSwingH()

◆ setSwingToggle()

◆ setSwingV()

◆ setTemp()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _

◆ _irsend