/* sv-SE.h - localization for Swedish - Svenska for Tasmota Copyright (C) 2021 Gunnar Norin This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #ifndef _LANGUAGE_SV_SE_H_ #define _LANGUAGE_SV_SE_H_ /*************************** ATTENTION *******************************\ * * Due to memory constraints only UTF-8 is supported. * To save code space keep text as short as possible. * Time and Date provided by SDK can not be localized (yet). * Use online command StateText to translate ON, OFF, HOLD and TOGGLE. * Use online command Prefix to translate cmnd, stat and tele. * * Updated until v6.2.1.11 \*********************************************************************/ //#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English) // https://www.science.co.il/language/Locale-codes.php #define LANGUAGE_LCID 1053 // HTML (ISO 639-1) Language Code #define D_HTML_LANGUAGE "sv" // "2017-03-07T11:08:02" - ISO8601:2004 #define D_YEAR_MONTH_SEPARATOR "-" #define D_MONTH_DAY_SEPARATOR "-" #define D_DATE_TIME_SEPARATOR "T" #define D_HOUR_MINUTE_SEPARATOR ":" #define D_MINUTE_SECOND_SEPARATOR ":" #define D_DAY3LIST "SönMånTisOnsTorFreLör" #define D_MONTH3LIST "JanFebMarAprMajJunJulAugSepOktNovDec" // Non JSON decimal separator #define D_DECIMAL_SEPARATOR "," // Common #define D_ADMIN "Admin" #define D_AIR_QUALITY "Luftkvalitet" #define D_AP "AP" // Access Point #define D_AS "som" #define D_AUTO "AUTO" #define D_BATT "Batt" // Short for Battery #define D_BLINK "Blinka" #define D_BLINKOFF "BlinkaAv" #define D_BOOT_COUNT "Uppstartsräknare" #define D_BRIGHTLIGHT "Ljust" #define D_BSSID "BSSId" #define D_BUTTON "Knapp" #define D_BY "av" // Written by me #define D_BYTES "Bytes" #define D_CELSIUS "Celsius" #define D_CHANNEL "Kanal" #define D_CO2 "Koldioxid" #define D_CODE "kod" // Button code #define D_COLDLIGHT "Kallt" #define D_COMMAND "Kommando" #define D_CONNECTED "Ansluten" #define D_CORS_DOMAIN "CORS Domain" #define D_COUNT "Räkna" #define D_COUNTER "Räknare" #define D_CT_POWER "CT Power" #define D_CURRENT "Ström" // As in Voltage and Current #define D_DATA "Data" #define D_DARKLIGHT "Mörkt" #define D_DEBUG "Debug" #define D_DEWPOINT "Dew point" #define D_DISABLED "Inaktiverad" #define D_DISTANCE "Distans" #define D_DNS_SERVER "DNS-server" #define D_DO "Disolved Oxygen" #define D_DONE "Gjort" #define D_DST_TIME "DST" #define D_EC "EC" #define D_ECO2 "eCO₂" #define D_EMULATION "Emulation" #define D_ENABLED "Aktiverad" #define D_ERASE "Ta bort" #define D_ERROR "Fel" #define D_FAHRENHEIT "Fahrenheit" #define D_FAILED "Misslyckades" #define D_FALLBACK "Reserv" #define D_FALLBACK_TOPIC "Reservämne" #define D_FALSE "Falskt" #define D_FILE "Fil" #define D_FLOW_RATE "Flow rate" #define D_FREE_MEMORY "Ledigt minne" #define D_PSR_MAX_MEMORY "PS-RAM Memory" #define D_PSR_FREE_MEMORY "PS-RAM free Memory" #define D_FREQUENCY "Frekvens" #define D_GAS "Gas" #define D_GATEWAY "Gateway" #define D_GROUP "Grupp" #define D_HOST "Värd" #define D_HOSTNAME "Värdnamn" #define D_HUMIDITY "Fuktighet" #define D_ILLUMINANCE "Belysnings" #define D_IMMEDIATE "Omedelbar" // Button immediate #define D_INDEX "Index" #define D_INFO "Info" #define D_INFRARED "Infraröd" #define D_INITIALIZED "Initialiserad" #define D_IP_ADDRESS "IP-adress" #define D_LIGHT "Ljus" #define D_LWT "LWT" #define D_LQI "LQI" // Zigbee Link Quality Index #define D_MODULE "Modul" #define D_MOISTURE "Moisture" #define D_MQTT "MQTT" #define D_MULTI_PRESS "fler tryck" #define D_NOISE "Oväsen" #define D_NONE "Ingen" #define D_O2 "Oxygen" #define D_OFF "Av" #define D_OFFLINE "Off-line" #define D_OK "Ok" #define D_ON "På" #define D_ONLINE "Ansluten" #define D_ORP "ORP" #define D_PASSWORD "Lösenord" #define D_PH "pH" #define D_PORT "Port" #define D_POWER_FACTOR "Spänningsfaktor" #define D_POWERUSAGE "Spänning" #define D_POWERUSAGE_ACTIVE "Aktiv spänning" #define D_POWERUSAGE_APPARENT "Skenbar spänning" #define D_POWERUSAGE_REACTIVE "Responsiv spänning" #define D_PRESSURE "Tryck" #define D_PRESSUREATSEALEVEL "Havstryck" #define D_PROGRAM_FLASH_SIZE "Program-flashstorlek" #define D_PROGRAM_SIZE "Programstorlek" #define D_PROJECT "Projekt" #define D_RAIN "Regn" #define D_RANGE "Range" #define D_RECEIVED "Mottagen" #define D_RESTART "Omstart" #define D_RESTARTING "Startar om" #define D_RESTART_REASON "Omstartsorsak" #define D_RESTORE "återställ" #define D_RETAINED "bevarad" #define D_RULE "Regel" #define D_SAVE "Spara" #define D_SENSOR "Sensor" #define D_SSID "SSId" #define D_START "Starta" #define D_STD_TIME "STD" #define D_STOP "Stoppa" #define D_SUBNET_MASK "Nätmask" #define D_SUBSCRIBE_TO "Prenumera på" #define D_UNSUBSCRIBE_FROM "Unsubscribe from" #define D_SUCCESSFUL "Lyckat" #define D_SUNRISE "Soluppgång" #define D_SUNSET "Solnedgång" #define D_TEMPERATURE "Temperatur" #define D_TO "till" #define D_TOGGLE "Växla" #define D_TOPIC "Ämne" #define D_TOTAL_USAGE "Total Usage" #define D_TRANSMIT "Sänd" #define D_TRUE "Sant" #define D_TVOC "TVOC" #define D_UPGRADE "uppgradera" #define D_UPLOAD "Ladda upp" #define D_UPTIME "Upptid" #define D_USER "Användare" #define D_UTC_TIME "UTC" #define D_UV_INDEX "UV Index" #define D_UV_INDEX_1 "Låg" #define D_UV_INDEX_2 "Med" #define D_UV_INDEX_3 "Hög" #define D_UV_INDEX_4 "Farligt" #define D_UV_INDEX_5 "Skadligt" #define D_UV_INDEX_6 "Extremt" #define D_UV_INDEX_7 "UO" // Out of Range #define D_UV_LEVEL "UV nivå" #define D_UV_POWER "UV kraft" #define D_VERSION "Version" #define D_VOLTAGE "Volttal" #define D_VOLUME "Volume" #define D_WEIGHT "Vikt" #define D_WARMLIGHT "Varm" #define D_WEB_SERVER "Webbserver" // tasmota.ino #define D_WARNING_MINIMAL_VERSION "VARNING Denna version supporterar inte beständiga inställningar" #define D_LEVEL_10 "nivå 1-0" #define D_LEVEL_01 "nivå 0-1" #define D_SERIAL_LOGGING_DISABLED "Seriell loggning inaktiverad" #define D_SYSLOG_LOGGING_REENABLED "Syslog återaktiverad" #define D_SET_BAUDRATE_TO "Ange Baudrate till" #define D_RECEIVED_TOPIC "Mottaget ämne" #define D_DATA_SIZE "Datastorlek" #define D_ANALOG_INPUT "Analog" // support.ino #define D_OSWATCH "osWatch" #define D_BLOCKED_LOOP "Blockerad loop" #define D_WPS_FAILED_WITH_STATUS "WPS-konfigurering MISSLYCKADES med status" #define D_ACTIVE_FOR_3_MINUTES "aktiv för 3 minuter" #define D_FAILED_TO_START "misslyckades att starta" #define D_PATCH_ISSUE_2186 "Laga problem 2186" #define D_CONNECTING_TO_AP "Ansluter till AP" #define D_IN_MODE "i läge" #define D_CONNECT_FAILED_NO_IP_ADDRESS "Anslutning misslyckades mottog ingen IP-adress" #define D_CONNECT_FAILED_AP_NOT_REACHED "Anslutning misslyckades, kunde inte nå AP" #define D_CONNECT_FAILED_WRONG_PASSWORD "Anslutning misslyckades" #define D_CONNECT_FAILED_AP_TIMEOUT "Anslutning misslyckadess med AP, timeout" #define D_ATTEMPTING_CONNECTION "Försöker ansluta..." #define D_CHECKING_CONNECTION "Kontrollerar anslutning..." #define D_QUERY_DONE "Fråga utförd. MQTT-tjänster hittades" #define D_MQTT_SERVICE_FOUND "MQTT-tjänst hittades på" #define D_FOUND_AT "hittades vid" #define D_SYSLOG_HOST_NOT_FOUND "Syslog-värd hittades inte" // settings.ino #define D_SAVED_TO_FLASH_AT "Sparade till flash vid" #define D_LOADED_FROM_FLASH_AT "Laddade från flash vid" #define D_USE_DEFAULTS "Använd standard" #define D_ERASED_SECTOR "Rensade sektor" // xdrv_02_webserver.ino #define D_NOSCRIPT "För att använda Tasmota, aktivera JavaScript" #define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMAL firmware
var god uppgradera" #define D_WEBSERVER_ACTIVE_ON "Webbserver aktiv på" #define D_WITH_IP_ADDRESS "med IP-adress" #define D_WEBSERVER_STOPPED "Webbserver stoppad" #define D_FILE_NOT_FOUND "Filen hittades inte" #define D_REDIRECTED "Omdirigerad till fångstportal" #define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifihanterare ange accesspunkt och behåll station" #define D_WIFIMANAGER_SET_ACCESSPOINT "Wifihanterare ange accesspunkt" #define D_TRYING_TO_CONNECT "Försöker att ansluta enheten till nätverk" #define D_RESTART_IN "Omstart om" #define D_SECONDS "sekunder" #define D_DEVICE_WILL_RESTART "Enheten kommer att starta om inom ett antal sekunder" #define D_BUTTON_TOGGLE "Växla" #define D_CONFIGURATION "Konfigurering" #define D_INFORMATION "Information" #define D_FIRMWARE_UPGRADE "Uppgradera firmware" #define D_CONSOLE "Konsol" #define D_CONFIRM_RESTART "Bekräfta omstart" #define D_CONFIGURE_MODULE "Konfigurera modul" #define D_CONFIGURE_WIFI "Konfigurera WiFi" #define D_CONFIGURE_MQTT "Konfigurera MQTT" #define D_CONFIGURE_DOMOTICZ "Konfigurera Domoticz" #define D_CONFIGURE_LOGGING "Konfigurera loggning" #define D_CONFIGURE_OTHER "Konfigurera annat" #define D_CONFIRM_RESET_CONFIGURATION "Bekräfta nollställning av konfiguration" #define D_RESET_CONFIGURATION "Nollställ konfiguration" #define D_BACKUP_CONFIGURATION "Säkerhetskopiera konfiguration" #define D_RESTORE_CONFIGURATION "Återställ konfiguration" #define D_MAIN_MENU "Huvudmeny" #define D_MODULE_PARAMETERS "Modulparameterar" #define D_MODULE_TYPE "Modultyp" #define D_PULLUP_ENABLE "Ingen knapp/brytare pull-up" #define D_ADC "ADC" #define D_GPIO "GPIO" #define D_SERIAL_IN "Seriell in" #define D_SERIAL_OUT "Seriell ut" #define D_WIFI_PARAMETERS "Wifi-parameterar" #define D_SCAN_FOR_WIFI_NETWORKS "Skanna efter wifi-nätverk" #define D_SCAN_DONE "Skanning slutförd" #define D_NO_NETWORKS_FOUND "Inga nätverk hittades" #define D_REFRESH_TO_SCAN_AGAIN "Uppdatera för att skanna igen" #define D_DUPLICATE_ACCESSPOINT "Dubblett accesspunkt" #define D_SKIPPING_LOW_QUALITY "Hoppa över pga dålig kvalitet" #define D_RSSI "RSSI" #define D_WEP "WEP" #define D_WPA_PSK "WPA PSK" #define D_WPA2_PSK "WPA2 PSK" #define D_AP1_SSID "AP1 SSId" #define D_AP1_PASSWORD "AP1 lösenord" #define D_AP2_SSID "AP2 SSId" #define D_AP2_PASSWORD "AP2 lösenord" #define D_MQTT_PARAMETERS "MQTT-parameterar" #define D_CLIENT "Klient" #define D_FULL_TOPIC "Fullt ämne" #define D_LOGGING_PARAMETERS "Loggningsparametrar" #define D_SERIAL_LOG_LEVEL "Seriell loggnivå" #define D_MQTT_LOG_LEVEL "Mqtt log level" #define D_WEB_LOG_LEVEL "Webb loggnivå" #define D_SYS_LOG_LEVEL "Syslog-nivå" #define D_MORE_DEBUG "Mer debugging" #define D_SYSLOG_HOST "Syslog-värd" #define D_SYSLOG_PORT "Syslog-port" #define D_TELEMETRY_PERIOD "Telemetriperiod" #define D_OTHER_PARAMETERS "Andra parametrar" #define D_TEMPLATE "Template" #define D_ACTIVATE "Activate" #define D_DEVICE_NAME "Device Name" #define D_WEB_ADMIN_PASSWORD "Webbadmin-lösenord" #define D_MQTT_ENABLE "MQTT aktivera" #define D_MQTT_TLS_ENABLE "MQTT TLS" #define D_FRIENDLY_NAME "Läsbart namn" #define D_BELKIN_WEMO "Belkin WeMo" #define D_HUE_BRIDGE "Hue Bridge" #define D_SINGLE_DEVICE "soloenhet" #define D_MULTI_DEVICE "multienhet" #define D_CONFIGURE_TEMPLATE "Configure Template" #define D_TEMPLATE_PARAMETERS "Template parameters" #define D_TEMPLATE_NAME "Name" #define D_BASE_TYPE "Based on" #define D_TEMPLATE_FLAGS "Options" #define D_SAVE_CONFIGURATION "Spara konfiguration" #define D_CONFIGURATION_SAVED "Konfiguration sparad" #define D_CONFIGURATION_RESET "Konfiguration nollställd" #define D_PROGRAM_VERSION "Programversion" #define D_BUILD_DATE_AND_TIME "Kompilerings datum & tid" #define D_CORE_AND_SDK_VERSION "Core/SDK version" #define D_FLASH_WRITE_COUNT "Flash-skrivningsräknare" #define D_MAC_ADDRESS "MAC-adress" #define D_MQTT_HOST "MQTT-värd" #define D_MQTT_PORT "MQTT-port" #define D_MQTT_CLIENT "MQTT-klient" #define D_MQTT_USER "MQTT-användare" #define D_MQTT_TOPIC "MQTT-ämne" #define D_MQTT_GROUP_TOPIC "MQTT gruppämne" #define D_MQTT_FULL_TOPIC "MQTT fullt ämne" #define D_MQTT_NO_RETAIN "MQTT No Retain" #define D_MDNS_DISCOVERY "mDNS upptäckning" #define D_MDNS_ADVERTISE "mDNS annonsering" #define D_ESP_CHIP_ID "ESP Chip Id" #define D_FLASH_CHIP_ID "Flash Chip Id" #define D_FLASH_CHIP_SIZE "Flash-storlek" #define D_FREE_PROGRAM_SPACE "Ledigt programutrymme" #define D_UPGRADE_BY_WEBSERVER "Uppgradering via webbserver" #define D_OTA_URL "OTA Url" #define D_START_UPGRADE "Starta uppdatering" #define D_UPGRADE_BY_FILE_UPLOAD "Uppgradering via filuppladdning" #define D_UPLOAD_STARTED "Uppladdning startad" #define D_UPGRADE_STARTED "Uppgradeing startad" #define D_UPLOAD_DONE "Uppladdning klar" #define D_UPLOAD_TRANSFER "Upload transfer" #define D_TRANSFER_STARTED "Transfer started" #define D_UPLOAD_ERR_1 "Ingen fil vald" #define D_UPLOAD_ERR_2 "Inte tillräckligt med ledigt utrymme" #define D_UPLOAD_ERR_3 "Invalid file signature" #define D_UPLOAD_ERR_4 "Programmets flashstorlek är större än den verkliga flashstorleken" #define D_UPLOAD_ERR_5 "Uppladdningbuffert stämmer inte överens" #define D_UPLOAD_ERR_6 "Uppladdning misslyckad. Aktivera loggning 3" #define D_UPLOAD_ERR_7 "Uppladdning avbruten" #define D_UPLOAD_ERR_8 "Ogiltig fil" #define D_UPLOAD_ERR_9 "För stor fil" #define D_UPLOAD_ERR_10 "Misslyckades initera RF chip" #define D_UPLOAD_ERR_11 "Misslyckades rensa RF chip" #define D_UPLOAD_ERR_12 "Misslyckades skriva till RF chip" #define D_UPLOAD_ERR_13 "Misslyckades avkoda RF firmware" #define D_UPLOAD_ERR_14 "Not compatible" #define D_UPLOAD_ERROR_CODE "Uppladdningsfelkod" #define D_ENTER_COMMAND "Ange kommando" #define D_ENABLE_WEBLOG_FOR_RESPONSE "Aktivera webblogg 2 om svar förväntas" #define D_NEED_USER_AND_PASSWORD "Behöver user=&password=" // xdrv_01_mqtt.ino #define D_FINGERPRINT "Verifierar TLS fingeravtryck..." #define D_TLS_CONNECT_FAILED_TO "TLS-anslutning misslyckades" #define D_RETRY_IN "Försöker igen om" #define D_VERIFIED "Verifierad med fingeravtryck" #define D_INSECURE "Osäker anslutning pga ogiltigt fingeravtryck" #define D_CONNECT_FAILED_TO "Anslutning misslyckades" // xplg_wemohue.ino #define D_MULTICAST_DISABLED "Multicast inaktiverad" #define D_MULTICAST_REJOINED "Multicast (åter)anslöt" #define D_MULTICAST_JOIN_FAILED "Multicast anslutning misslyckades" #define D_FAILED_TO_SEND_RESPONSE "Misslyckades skicka svar" #define D_WEMO "WeMo" #define D_WEMO_BASIC_EVENT "WeMo standardhändelse" #define D_WEMO_EVENT_SERVICE "WeMo händelsetjänst" #define D_WEMO_META_SERVICE "WeMo metatjänst" #define D_WEMO_SETUP "WeMo installation" #define D_RESPONSE_SENT "Svar skickat" #define D_HUE "Hue" #define D_HUE_BRIDGE_SETUP "Hue installation" #define D_HUE_API_NOT_IMPLEMENTED "Hue API inte implementerat" #define D_HUE_API "Hue API" #define D_HUE_POST_ARGS "Hue POST args" #define D_3_RESPONSE_PACKETS_SENT "3 svarspaket skickade" // xdrv_07_domoticz.ino #define D_DOMOTICZ_PARAMETERS "Domoticz parametetrar" #define D_DOMOTICZ_IDX "Idx" #define D_DOMOTICZ_KEY_IDX "Nyckel idx" #define D_DOMOTICZ_SWITCH_IDX "Switch idx" #define D_DOMOTICZ_SENSOR_IDX "Sensor idx" #define D_DOMOTICZ_TEMP "Temp" #define D_DOMOTICZ_TEMP_HUM "Temp,Fuk" #define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Fuk,Baro" #define D_DOMOTICZ_POWER_ENERGY "Spänning,Energi" #define D_DOMOTICZ_ILLUMINANCE "Belysningsstyrka" #define D_DOMOTICZ_COUNT "Antal/PM1" #define D_DOMOTICZ_VOLTAGE "Volt/PM2.5" #define D_DOMOTICZ_CURRENT "Ström/PM10" #define D_DOMOTICZ_AIRQUALITY "Luftkvalitet" #define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter" #define D_DOMOTICZ_UPDATE_TIMER "Uppdatera timer" // xdrv_09_timers.ino #define D_CONFIGURE_TIMER "Konfigurera timer" #define D_TIMER_PARAMETERS "Timerparametrar" #define D_TIMER_ENABLE "Aktivera timer" #define D_TIMER_ARM "Aktivera" #define D_TIMER_TIME "Tid" #define D_TIMER_DAYS "Dagar" #define D_TIMER_REPEAT "Repetera" #define D_TIMER_OUTPUT "Utgång" #define D_TIMER_ACTION "Åtgärd" // xdrv_10_knx.ino #define D_CONFIGURE_KNX "Konfigurera KNX" #define D_KNX_PARAMETERS "KNX Parametrar" #define D_KNX_GENERAL_CONFIG "Allmänt" #define D_KNX_PHYSICAL_ADDRESS "Fysisk adress" #define D_KNX_PHYSICAL_ADDRESS_NOTE "( Måste vara unik på KNX-nätverket )" #define D_KNX_ENABLE "Aktivera KNX" #define D_KNX_GROUP_ADDRESS_TO_WRITE "Data att skicka till gruppadresser" #define D_ADD "Lägg till" #define D_DELETE "Ta bort" #define D_REPLY "Svara" #define D_KNX_GROUP_ADDRESS_TO_READ "Gruppadresser att ta emot data från" #define D_RECEIVED_FROM "Mottagen från" #define D_KNX_COMMAND_WRITE "Skriv" #define D_KNX_COMMAND_READ "Läs" #define D_KNX_COMMAND_OTHER "Andra" #define D_SENT_TO "skickad till" #define D_KNX_WARNING "Gruppadressen ( 0 / 0 / 0 ) är reserverad och kan inte användas." #define D_KNX_ENHANCEMENT "Kommuniceringsförbättring" #define D_KNX_TX_SLOT "KNX TX" #define D_KNX_RX_SLOT "KNX RX" #define D_KNX_TX_SCENE "KNX SCENE TX" #define D_KNX_RX_SCENE "KNX SCENE RX" // xdrv_23_zigbee #define D_ZIGBEE_PERMITJOIN_ACTIVE "Devices allowed to join" #define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee Mapping" #define D_ZIGBEE_NOT_STARTED "Zigbee not started" #define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "Mapping in progress (%d s. remaining)" #define D_ZIGBEE_MAPPING_NOT_PRESENT "No mapping" #define D_ZIGBEE_MAP_REFRESH "Zigbee Map Refresh" #define D_ZIGBEE_MAP "Zigbee Map" #define D_ZIGBEE_PERMITJOIN "Zigbee Permit Join" #define D_ZIGBEE_GENERATE_KEY "generating random Zigbee network key" #define D_ZIGBEE_UNKNOWN_DEVICE "Unknown device" #define D_ZIGBEE_UNKNOWN_ATTRIBUTE "Unknown attribute" #define D_ZIGBEE_INVALID_PARAM "Invalid parameter" #define D_ZIGBEE_MISSING_PARAM "Missing parameters" #define D_ZIGBEE_UNKNWON_ATTRIBUTE "Unknown attribute name (ignored): %s" #define D_ZIGBEE_TOO_MANY_CLUSTERS "No more than one cluster id per command" #define D_ZIGBEE_WRONG_DELIMITER "Wrong delimiter for payload" #define D_ZIGBEE_UNRECOGNIZED_COMMAND "Unrecognized zigbee command: %s" #define D_ZIGBEE_TOO_MANY_COMMANDS "Only 1 command allowed (%d)" #define D_ZIGBEE_NO_ATTRIBUTE "No attribute in list" #define D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE "Unsupported attribute type" #define D_ZIGBEE_JSON_REQUIRED "Config requires JSON objects" #define D_ZIGBEE_RESET_1_OR_2 "1 or 2 to reset" #define D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS "ZBBridge EEPROM found at address" #define D_ZIGBEE_RANDOMIZING_ZBCONFIG "Randomizing Zigbee parameters, please check with 'ZbConfig'" // xdrv_03_energy.ino #define D_ENERGY_TODAY "Energi idag" #define D_ENERGY_YESTERDAY "Energi igår" #define D_ENERGY_TOTAL "Energi totalt" // xdrv_27_shutter.ino #define D_OPEN "Open" #define D_CLOSE "Close" #define D_DOMOTICZ_SHUTTER "Shutter" // xdrv_28_pcf8574.ino #define D_CONFIGURE_PCF8574 "Configure PCF8574" #define D_PCF8574_PARAMETERS "PCF8574 parameters" #define D_INVERT_PORTS "Invert Ports" #define D_DEVICE "Device" #define D_DEVICE_INPUT "Input" #define D_DEVICE_OUTPUT "Output" // xsns_05_ds18b20.ino #define D_SENSOR_BUSY "Sensor upptagen" #define D_SENSOR_CRC_ERROR "Sensor CRC-fel" #define D_SENSORS_FOUND "Sensorer hittades" // xsns_06_dht.ino #define D_TIMEOUT_WAITING_FOR "Timeout under väntan" #define D_START_SIGNAL_LOW "startsignal låg" #define D_START_SIGNAL_HIGH "startsignal hög" #define D_PULSE "puls" #define D_CHECKSUM_FAILURE "Fel kontrollsumma" // xsns_07_sht1x.ino #define D_SENSOR_DID_NOT_ACK_COMMAND "Sensor besvarade inte med ACK kommando" #define D_SHT1X_FOUND "SHT1X hittades" // xsns_18_pms5003.ino #define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter #define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter #define D_PARTICALS_BEYOND "Partiklar" // xsns_27_apds9960.ino #define D_GESTURE "Gesture" #define D_COLOR_RED "Red" #define D_COLOR_GREEN "Green" #define D_COLOR_BLUE "Blue" #define D_CCT "CCT" #define D_PROXIMITY "Proximity" // xsns_32_mpu6050.ino #define D_AX_AXIS "Accel. X-Axel" #define D_AY_AXIS "Accel. Y-Axel" #define D_AZ_AXIS "Accel. Z-Axel" #define D_GX_AXIS "Gyro X-Axel" #define D_GY_AXIS "Gyro Y-Axel" #define D_GZ_AXIS "Gyro Z-Axel" // xsns_34_hx711.ino #define D_HX_CAL_REMOVE "Ta bort vikter" #define D_HX_CAL_REFERENCE "Ladda referensvikt" #define D_HX_CAL_DONE "Kalibrerad" #define D_HX_CAL_FAIL "Kalibrering misslyckad" #define D_RESET_HX711 "Återställ våg" #define D_CONFIGURE_HX711 "Konfigurera våg" #define D_HX711_PARAMETERS "Vågparametrar" #define D_ITEM_WEIGHT "Objektsvikt" #define D_REFERENCE_WEIGHT "Referensvikt" #define D_CALIBRATE "Kalibrera" #define D_CALIBRATION "Kalibrering" //xsns_35_tx20.ino #define D_TX20_WIND_DIRECTION "Vindriktning" #define D_TX20_WIND_SPEED "Vindstyrka" #define D_TX20_WIND_SPEED_MIN "Vindstyrka min" #define D_TX20_WIND_SPEED_MAX "Vindstyrka max" #define D_TX20_NORTH "N" #define D_TX20_EAST "Ö" #define D_TX20_SOUTH "S" #define D_TX20_WEST "V" // xsns_53_sml.ino #define D_TPWRIN "Energy Total-In" #define D_TPWROUT "Energy Total-Out" #define D_TPWRCURR "Active Power-In/Out" #define D_TPWRCURR1 "Active Power-In p1" #define D_TPWRCURR2 "Active Power-In p2" #define D_TPWRCURR3 "Active Power-In p3" #define D_Strom_L1 "Current L1" #define D_Strom_L2 "Current L2" #define D_Strom_L3 "Current L3" #define D_Spannung_L1 "Voltage L1" #define D_Spannung_L2 "Voltage L2" #define D_Spannung_L3 "Voltage L3" #define D_METERNR "Meter_number" #define D_METERSID "Service ID" #define D_GasIN "Counter" #define D_H2oIN "Counter" #define D_StL1L2L3 "Current L1+L2+L3" #define D_SpL1L2L3 "Voltage L1+L2+L3/3" // tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box #define D_SENSOR_NONE "Ingen" #define D_SENSOR_USER "User" #define D_SENSOR_OPTION "Option" #define D_SENSOR_DHT11 "DHT11" #define D_SENSOR_AM2301 "AM2301" #define D_SENSOR_SI7021 "SI7021" #define D_SENSOR_DS18X20 "DS18x20" #define D_SENSOR_I2C_SCL "I2C SCL" #define D_SENSOR_I2C_SDA "I2C SDA" #define D_SENSOR_WS2812 "WS2812" #define D_SENSOR_DFR562 "MP3-spelare" #define D_SENSOR_IRSEND "IRsend" #define D_SENSOR_SWITCH "Omkopplare" // Suffix "1" #define D_SENSOR_BUTTON "Knapp" // Suffix "1" #define D_SENSOR_RELAY "Relä" // Suffix "1i" #define D_SENSOR_LED "Led" // Suffix "1i" #define D_SENSOR_LED_LINK "LedLink" // Suffix "i" #define D_SENSOR_PWM "PWM" // Suffix "1" #define D_SENSOR_COUNTER "Räknare" // Suffix "1" #define D_SENSOR_IRRECV "IRrecv" #define D_SENSOR_MHZ_RX "MHZ Rx" #define D_SENSOR_MHZ_TX "MHZ Tx" #define D_SENSOR_PZEM004_RX "PZEM004 Rx" #define D_SENSOR_PZEM016_RX "PZEM016 Rx" #define D_SENSOR_PZEM017_RX "PZEM017 Rx" #define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx" #define D_SENSOR_SAIR_RX "SAir Rx" #define D_SENSOR_SAIR_TX "SAir Tx" #define D_SENSOR_SPI_CS "SPI CS" #define D_SENSOR_SPI_DC "SPI DC" #define D_SENSOR_SPI_MISO "SPI MISO" #define D_SENSOR_SPI_MOSI "SPI MOSI" #define D_SENSOR_SPI_CLK "SPI CLK" #define D_SENSOR_BACKLIGHT "Backlight" #define D_SENSOR_PMS5003_TX "PMS5003 Tx" #define D_SENSOR_PMS5003_RX "PMS5003 Rx" #define D_SENSOR_SDS0X1_RX "SDS0X1 Rx" #define D_SENSOR_SDS0X1_TX "SDS0X1 Tx" #define D_SENSOR_HPMA_RX "HPMA Rx" #define D_SENSOR_HPMA_TX "HPMA Tx" #define D_SENSOR_SBR_RX "SerBr Rx" #define D_SENSOR_SBR_TX "SerBr Tx" #define D_SENSOR_SR04_TRIG "SR04 Tri/TX" #define D_SENSOR_SR04_ECHO "SR04 Ech/RX" #define D_SENSOR_SDM120_TX "SDMx20 Tx" #define D_SENSOR_SDM120_RX "SDMx20 Rx" #define D_SENSOR_SDM630_TX "SDM630 Tx" #define D_SENSOR_SDM630_RX "SDM630 Rx" #define D_SENSOR_WE517_TX "WE517 Tx" #define D_SENSOR_WE517_RX "WE517 Rx" #define D_SENSOR_TM1638_CLK "TM16 CLK" #define D_SENSOR_TM1638_DIO "TM16 DIO" #define D_SENSOR_TM1638_STB "TM16 STB" #define D_SENSOR_HX711_SCK "HX711 SCK" #define D_SENSOR_HX711_DAT "HX711 DAT" #define D_SENSOR_FTC532 "FTC532" #define D_SENSOR_TX2X_TX "TX2x" #define D_SENSOR_RFSEND "RFSend" #define D_SENSOR_RFRECV "RFrecv" #define D_SENSOR_TUYA_TX "Tuya Tx" #define D_SENSOR_TUYA_RX "Tuya Rx" #define D_SENSOR_MGC3130_XFER "MGC3130 Xfr" #define D_SENSOR_MGC3130_RESET "MGC3130 Rst" #define D_SENSOR_SSPI_MISO "SSPI MISO" #define D_SENSOR_SSPI_MOSI "SSPI MOSI" #define D_SENSOR_SSPI_SCLK "SSPI SCLK" #define D_SENSOR_SSPI_CS "SSPI CS" #define D_SENSOR_SSPI_DC "SSPI DC" #define D_SENSOR_RF_SENSOR "RF Sensor" #define D_SENSOR_AZ_RX "AZ Rx" #define D_SENSOR_AZ_TX "AZ Tx" #define D_SENSOR_MAX31855_CS "MX31855 CS" #define D_SENSOR_MAX31855_CLK "MX31855 CLK" #define D_SENSOR_MAX31855_DO "MX31855 DO" #define D_SENSOR_MAX31865_CS "MX31865 CS" #define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i" #define D_SENSOR_NRG_CF1 "HLWBL CF1" #define D_SENSOR_HLW_CF "HLW8012 CF" #define D_SENSOR_HJL_CF "BL0937 CF" #define D_SENSOR_MCP39F5_TX "MCP39F5 Tx" #define D_SENSOR_MCP39F5_RX "MCP39F5 Rx" #define D_SENSOR_MCP39F5_RST "MCP39F5 Rst" #define D_SENSOR_CSE7766_TX "CSE7766 Tx" #define D_SENSOR_CSE7766_RX "CSE7766 Rx" #define D_SENSOR_PN532_TX "PN532 Tx" #define D_SENSOR_PN532_RX "PN532 Rx" #define D_SENSOR_SM16716_CLK "SM16716 CLK" #define D_SENSOR_SM16716_DAT "SM16716 DAT" #define D_SENSOR_SM16716_POWER "SM16716 PWR" #define D_SENSOR_P9813_CLK "P9813 Clk" #define D_SENSOR_P9813_DAT "P9813 Dat" #define D_SENSOR_MY92X1_DI "MY92x1 DI" #define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI" #define D_SENSOR_ARIRFRCV "ALux IrRcv" #define D_SENSOR_ARIRFSEL "ALux IrSel" #define D_SENSOR_TXD "Serial Tx" #define D_SENSOR_RXD "Serial Rx" #define D_SENSOR_ROTARY "Rotary" // Suffix "1A" #define D_SENSOR_HRE_CLOCK "HRE Clock" #define D_SENSOR_HRE_DATA "HRE Data" #define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ" #define D_SENSOR_BUZZER "Buzzer" #define D_SENSOR_OLED_RESET "OLED Reset" #define D_SENSOR_ZIGBEE_TXD "Zigbee Tx" #define D_SENSOR_ZIGBEE_RXD "Zigbee Rx" #define D_SENSOR_ZIGBEE_RST "Zigbee Rst" #define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx" #define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx" #define D_SENSOR_IBEACON_TX "iBeacon TX" #define D_SENSOR_IBEACON_RX "iBeacon RX" #define D_SENSOR_RDM6300_RX "RDM6300 RX" #define D_SENSOR_CC1101_CS "CC1101 CS" #define D_SENSOR_A4988_DIR "A4988 DIR" #define D_SENSOR_A4988_STP "A4988 STP" #define D_SENSOR_A4988_ENA "A4988 ENA" #define D_SENSOR_A4988_MS1 "A4988 MS1" #define D_SENSOR_OUTPUT_HI "Output Hi" #define D_SENSOR_OUTPUT_LO "Output Lo" #define D_SENSOR_AS608_TX "AS608 Tx" #define D_SENSOR_AS608_RX "AS608 Rx" #define D_SENSOR_DDS2382_TX "DDS238-2 Tx" #define D_SENSOR_DDS2382_RX "DDS238-2 Rx" #define D_SENSOR_DDSU666_TX "DDSU666 Tx" #define D_SENSOR_DDSU666_RX "DDSU666 Rx" #define D_SENSOR_SM2135_CLK "SM2135 Clk" #define D_SENSOR_SM2135_DAT "SM2135 Dat" #define D_SENSOR_DEEPSLEEP "DeepSleep" #define D_SENSOR_EXS_ENABLE "EXS Enable" #define D_SENSOR_CLIENT_TX "Client TX" #define D_SENSOR_CLIENT_RX "Client RX" #define D_SENSOR_CLIENT_RESET "Client RST" #define D_SENSOR_GPS_RX "GPS RX" #define D_SENSOR_GPS_TX "GPS TX" #define D_SENSOR_HM10_RX "HM10 RX" #define D_SENSOR_HM10_TX "HM10 TX" #define D_SENSOR_LE01MR_RX "LE-01MR Rx" #define D_SENSOR_LE01MR_TX "LE-01MR Tx" #define D_SENSOR_BL0940_RX "BL0940 Rx" #define D_SENSOR_CC1101_GDO0 "CC1101 GDO0" #define D_SENSOR_CC1101_GDO2 "CC1101 GDO2" #define D_SENSOR_HRXL_RX "HRXL Rx" #define D_SENSOR_DYP_RX "DYP Rx" #define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx" #define D_SENSOR_AS3935 "AS3935" #define D_SENSOR_WINDMETER_SPEED "WindMeter Spd" #define D_SENSOR_TELEINFO_RX "TInfo Rx" #define D_SENSOR_TELEINFO_ENABLE "TInfo EN" #define D_SENSOR_LMT01_PULSE "LMT01 Pulse" #define D_SENSOR_ADC_INPUT "ADC Input" #define D_SENSOR_ADC_TEMP "ADC Temp" #define D_SENSOR_ADC_LIGHT "ADC Light" #define D_SENSOR_ADC_BUTTON "ADC Button" #define D_SENSOR_ADC_RANGE "ADC Range" #define D_SENSOR_ADC_CT_POWER "ADC CT Power" #define D_SENSOR_ADC_JOYSTICK "ADC Joystick" #define D_SENSOR_ADC_PH "ADC pH" #define D_GPIO_WEBCAM_PWDN "CAM_PWDN" #define D_GPIO_WEBCAM_RESET "CAM_RESET" #define D_GPIO_WEBCAM_XCLK "CAM_XCLK" #define D_GPIO_WEBCAM_SIOD "CAM_SIOD" #define D_GPIO_WEBCAM_SIOC "CAM_SIOC" #define D_GPIO_WEBCAM_DATA "CAM_DATA" #define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC" #define D_GPIO_WEBCAM_HREF "CAM_HREF" #define D_GPIO_WEBCAM_PCLK "CAM_PCLK" #define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK" #define D_GPIO_WEBCAM_HSD "CAM_HSD" #define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS" #define D_SENSOR_ETH_PHY_POWER "ETH POWER" #define D_SENSOR_ETH_PHY_MDC "ETH MDC" #define D_SENSOR_ETH_PHY_MDIO "ETH MDIO" #define D_SENSOR_TCP_TXD "TCP Tx" #define D_SENSOR_TCP_RXD "TCP Rx" #define D_SENSOR_IEM3000_TX "iEM3000 TX" #define D_SENSOR_IEM3000_RX "iEM3000 RX" #define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx" #define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx" #define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0" #define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset" #define D_SENSOR_RC522_RST "RC522 Rst" #define D_SENSOR_RC522_CS "RC522 CS" #define D_SENSOR_NRF24_CS "NRF24 CS" #define D_SENSOR_NRF24_DC "NRF24 DC" #define D_SENSOR_ILI9341_CS "ILI9341 CS" #define D_SENSOR_ILI9341_DC "ILI9341 DC" #define D_SENSOR_ILI9488_CS "ILI9488 CS" #define D_SENSOR_EPAPER29_CS "EPaper29 CS" #define D_SENSOR_EPAPER42_CS "EPaper42 CS" #define D_SENSOR_SSD1351_CS "SSD1351 CS" #define D_SENSOR_RA8876_CS "RA8876 CS" #define D_SENSOR_ST7789_CS "ST7789 CS" #define D_SENSOR_ST7789_DC "ST7789 DC" #define D_SENSOR_SSD1331_CS "SSD1331 CS" #define D_SENSOR_SSD1331_DC "SSD1331 DC" #define D_SENSOR_SDCARD_CS "SDCard CS" // Units #define D_UNIT_AMPERE "A" #define D_UNIT_CELSIUS "C" #define D_UNIT_CENTIMETER "cm" #define D_UNIT_DEGREE "°" #define D_UNIT_FAHRENHEIT "F" #define D_UNIT_HERTZ "Hz" #define D_UNIT_HOUR "Tim" #define D_UNIT_GALLONS "gal" #define D_UNIT_GALLONS_PER_MIN "g/m" #define D_UNIT_INCREMENTS "ink" #define D_UNIT_KELVIN "K" #define D_UNIT_KILOMETER "km" #define D_UNIT_KILOGRAM "kg" #define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h" #define D_UNIT_KILOOHM "kΩ" #define D_UNIT_KILOWATTHOUR "kWh" #define D_UNIT_LITERS "L" #define D_UNIT_LITERS_PER_MIN "L/m" #define D_UNIT_LUX "lx" #define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg/m³" #define D_UNIT_MICROMETER "µm" #define D_UNIT_MICROSECOND "µs" #define D_UNIT_MICROSIEMENS_PER_CM "µS/cm" #define D_UNIT_MILLIAMPERE "mA" #define D_UNIT_MILLILITERS "ml" #define D_UNIT_MILLIMETER "mm" #define D_UNIT_MILLIMETER_MERCURY "mmHg" #define D_UNIT_MILLISECOND "ms" #define D_UNIT_MILLIVOLT "mV" #define D_UNIT_MINUTE "Min" #define D_UNIT_PARTS_PER_BILLION "ppb" #define D_UNIT_PARTS_PER_DECILITER "ppd" #define D_UNIT_PARTS_PER_MILLION "ppm" #define D_UNIT_PERCENT "%%" #define D_UNIT_PRESSURE "hPa" #define D_UNIT_SECOND "sek" #define D_UNIT_SECTORS "sektorer" #define D_UNIT_VA "VA" #define D_UNIT_VAR "VAr" #define D_UNIT_VOLT "V" #define D_UNIT_WATT "W" #define D_UNIT_WATTHOUR "Wh" #define D_UNIT_WATT_METER_QUADRAT "W/m²" //SDM220, SDM120, LE01MR #define D_PHASE_ANGLE "Fasvinkel" #define D_IMPORT_ACTIVE "Import aktiv" #define D_EXPORT_ACTIVE "Export aktiv" #define D_IMPORT_REACTIVE "Import reaktiv" #define D_EXPORT_REACTIVE "Export reaktiv" #define D_TOTAL_REACTIVE "Total reaktiv" #define D_UNIT_KWARH "kVArh" #define D_UNIT_ANGLE "Deg" #define D_TOTAL_ACTIVE "Total aktiv" //SOLAXX1 #define D_PV1_VOLTAGE "PV1 Voltage" #define D_PV1_CURRENT "PV1 Current" #define D_PV1_POWER "PV1 Power" #define D_PV2_VOLTAGE "PV2 Voltage" #define D_PV2_CURRENT "PV2 Current" #define D_PV2_POWER "PV2 Power" #define D_SOLAR_POWER "Solar Power" #define D_INVERTER_POWER "Inverter Power" #define D_STATUS "Status" #define D_WAITING "Waiting" #define D_CHECKING "Checking" #define D_WORKING "Working" #define D_FAILURE "Failure" #define D_SOLAX_ERROR_0 "No Error Code" #define D_SOLAX_ERROR_1 "Grid Lost Fault" #define D_SOLAX_ERROR_2 "Grid Voltage Fault" #define D_SOLAX_ERROR_3 "Grid Frequency Fault" #define D_SOLAX_ERROR_4 "Pv Voltage Fault" #define D_SOLAX_ERROR_5 "Isolation Fault" #define D_SOLAX_ERROR_6 "Over Temperature Fault" #define D_SOLAX_ERROR_7 "Fan Fault" #define D_SOLAX_ERROR_8 "Other Device Fault" //xdrv_10_scripter.ino #define D_CONFIGURE_SCRIPT "Edit script" #define D_SCRIPT "edit script" #define D_SDCARD_UPLOAD "file upload" #define D_UFSDIR "ufs directory" #define D_UPL_DONE "Done" #define D_SCRIPT_CHARS_LEFT "chars left" #define D_SCRIPT_CHARS_NO_MORE "no more chars" #define D_SCRIPT_DOWNLOAD "Download" #define D_SCRIPT_ENABLE "script enable" #define D_SCRIPT_UPLOAD "Upload" #define D_SCRIPT_UPLOAD_FILES "Upload files" //xdrv_50_filesystem.ino #define D_MANAGE_FILE_SYSTEM "Manage File system" #define D_FS_SIZE "Size" #define D_FS_FREE "Free" //xsns_67_as3935.ino #define D_AS3935_GAIN "gain:" #define D_AS3935_ENERGY "energy:" #define D_AS3935_DISTANCE "distance:" #define D_AS3935_DISTURBER "disturber:" #define D_AS3935_VRMS "µVrms:" #define D_AS3935_APRX "aprx.:" #define D_AS3935_AWAY "away" #define D_AS3935_LIGHT "lightning" #define D_AS3935_OUT "lightning out of range" #define D_AS3935_NOT "distance not determined" #define D_AS3935_ABOVE "lightning overhead" #define D_AS3935_NOISE "noise detected" #define D_AS3935_DISTDET "disturber detected" #define D_AS3935_INTNOEV "Interrupt with no Event!" #define D_AS3935_FLICKER "IRQ flicker!" #define D_AS3935_POWEROFF "Power Off" #define D_AS3935_NOMESS "listening..." #define D_AS3935_ON "On" #define D_AS3935_OFF "Off" #define D_AS3935_INDOORS "Indoors" #define D_AS3935_OUTDOORS "Outdoors" #define D_AS3935_CAL_FAIL "calibration failed" #define D_AS3935_CAL_OK "calibration set to:" //xsns_68_opentherm.ino #define D_SENSOR_BOILER_OT_RX "OpenTherm RX" #define D_SENSOR_BOILER_OT_TX "OpenTherm TX" // xnrg_15_teleinfo Denky (Teleinfo) #define D_CONTRACT "Contract" #define D_POWER_LOAD "Power load" #define D_CURRENT_TARIFF "Current Tariff" #define D_TARIFF "Tariff" #define D_OVERLOAD "ADPS" #define D_MAX_POWER "Max Power" #define D_MAX_CURRENT "Max Current" // xsns_79_as608.ino #define D_FP_ENROLL_PLACEFINGER "Place finger" #define D_FP_ENROLL_REMOVEFINGER "Remove finger" #define D_FP_ENROLL_PLACESAMEFINGER "Place same finger again" #define D_FP_ENROLL_RETRY "Error so retry" #define D_FP_ENROLL_RESTART "Restart" #define D_FP_ENROLL_ERROR "Error" #define D_FP_ENROLL_RESET "Reset" #define D_FP_ENROLL_ACTIVE "Active" #define D_FP_ENROLL_INACTIVE "Inactive" // Indexed by Adafruit_Fingerprint.h defines #define D_FP_PACKETRECIEVEERR "Comms error" // 0x01 Error when receiving data package #define D_FP_NOFINGER "" // 0x02 No finger on the sensor #define D_FP_IMAGEFAIL "Imaging error" // 0x03 Failed to enroll the finger #define D_FP_IMAGEMESS "Image too messy" // 0x06 Failed to generate character file due to overly disorderly fingerprint image #define D_FP_FEATUREFAIL "Fingerprint too small" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image #define D_FP_NOMATCH "No match" // 0x08 Finger doesn't match #define D_FP_NOTFOUND "Did not find a match" // 0x09 Failed to find matching finger #define D_FP_ENROLLMISMATCH "Fingerprint did not match" // 0x0A Failed to combine the character files #define D_FP_BADLOCATION "Bad location" // 0x0B Addressed PageID is beyond the finger library #define D_FP_DBRANGEFAIL "DB range error" // 0x0C Error when reading template from library or invalid template #define D_FP_UPLOADFEATUREFAIL "Upload feature error" // 0x0D Error when uploading template #define D_FP_PACKETRESPONSEFAIL "Packet response error" // 0x0E Module failed to receive the following data packages #define D_FP_UPLOADFAIL "Upload error" // 0x0F Error when uploading image #define D_FP_DELETEFAIL "Delete error" // 0x10 Failed to delete the template #define D_FP_DBCLEARFAIL "DB Clear error" // 0x11 Failed to clear finger library #define D_FP_PASSFAIL "Password error" // 0x13 Find whether the fingerprint passed or failed #define D_FP_INVALIDIMAGE "Image invalid" // 0x15 Failed to generate image because of lac of valid primary image #define D_FP_FLASHERR "Flash write error" // 0x18 Error when writing flash #define D_FP_INVALIDREG "Invalid number" // 0x1A Invalid register number #define D_FP_ADDRCODE "Address code" // 0x20 Address code #define D_FP_PASSVERIFY "Password verified" // 0x21 Verify the fingerprint passed #define D_FP_UNKNOWNERROR "Error" // Any other error #endif // _LANGUAGE_SV_SE_H_