# RELEASE NOTES ## Migration Information **This version removes support for direct migration from versions before v8.1.0 (Doris)** See [migration path](https://tasmota.github.io/docs/Upgrading#migration-path) for instructions how to migrate to a major version. **Do not upgrade from minimal to minimal version. It will most likely fail at some point and will require flashing via serial.** If you do have to use minimal versions, always OTA to a full version of the same release before applying next minimal version. Pay attention to the following version breaks due to dynamic settings updates: 1. Migrate to **Sonoff-Tasmota 3.9.x** 2. Migrate to **Sonoff-Tasmota 4.x** 3. Migrate to **Sonoff-Tasmota 5.14** (http://ota.tasmota.com/tasmota/release_5.14.0/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 4. Migrate to **Sonoff-Tasmota 6.7.1** (http://ota.tasmota.com/tasmota/release_6.7.1/sonoff.bin) - NOTICE underscore as a dash is not supported in older versions 5. Migrate to **Tasmota 7.2.0** (http://ota.tasmota.com/tasmota/release-7.2.0/tasmota.bin) --- Major change in parameter storage layout --- 6. Migrate to **Tasmota 8.5.1** (http://ota.tasmota.com/tasmota/release-8.5.1/tasmota.bin) --- Major change in internal GPIO function representation --- 7. Migrate to **Tasmota 9.1** (http://ota.tasmota.com/tasmota/release-9.1.0/tasmota.bin.gz) 8. Upgrade to **latest release** (http://ota.tasmota.com/tasmota/release/tasmota.bin.gz) While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release **v9.1.0 Imogen** the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing **v9.1.0**. ## Supported Core versions This release will be supported from ESP8266/Arduino library Core version **2.7.4.9** due to reported security and stability issues on previous Core version. This will also support gzipped binaries. This release will be supported from ESP32/Arduino library Core version **2.0.14**. Support of ESP8266 Core versions before 2.7.4.9 and ESP32 Core versions before 2.0.14 have been removed. ## Support of TLS In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read [full documentation](https://tasmota.github.io/docs/AWS-IoT) ## Initial configuration tools For initial configuration this release supports Webserver based **WifiManager** or **Serial** based command interface. ## Initial installation Easy initial installation of Tasmota can be performed using the [Tasmota WebInstaller](https://tasmota.github.io/install/). ## Provided Binary Downloads ### ESP8266 or ESP8285 based The following binary downloads have been compiled with ESP8266/Arduino library core version **2.7.4.9**. - **tasmota.bin** = The Tasmota version with most drivers for 1M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota-4M.bin** = The Tasmota version with most drivers and filesystem for 4M+ flash. - **tasmota-AD.bin** to **tasmota-VN.bin** = The Tasmota version in different languages for 1M+ flash. - **tasmota-lite.bin** = The Lite version without most drivers and sensors for 1M+ flash. - **tasmota-knx.bin** = The Knx version without some features but adds KNX support for 1M+ flash. - **tasmota-sensors.bin** = The Sensors version adds more useful sensors for 1M+ flash. - **tasmota-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash. - **tasmota-display.bin** = The Display version without Energy Monitoring but adds display support for 1M+ flash. - **tasmota-zbbridge.bin** = The dedicated Sonoff Zigbee Bridge version for 2M+ flash. - **tasmota-zigbee.bin** = The dedicated cc25xx Zigbee Bridge version for 4M+ flash. Above binaries are also available as gzipped version allowing faster uploads. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - http://ota.tasmota.com/tasmota/release Historical binaries can be downloaded from - http://ota.tasmota.com/tasmota/release-13.1.0 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz`` ### ESP32, ESP32-C3, ESP32-S2 and ESP32-S3 based The following binary downloads have been compiled with ESP32/Arduino library core version **2.0.14**. - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. **RECOMMENDED RELEASE BINARY** - **tasmota32xy.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 and 4M+ flash. - **tasmota32xycdc.bin** = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3/S2/S3 with serial over embedded USB CDC only and 4M+ flash. - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash. - **tasmota32-AD.bin** to **tasmota32-VN.bin** = The Tasmota version in different languages for 4M+ flash. - **tasmota32-bluetooth.bin** = The Bluetooth version adds BLE support for 4M+ flash. - **tasmota32-display.bin** = The Display version without Energy Monitoring but adds display support for 4M+ flash. - **tasmota32-ir.bin** = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash. - **tasmota32-lvgl.bin** = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash. - **tasmota32-nspanel.bin** = The Sonoff NSPanel Smart Scene Wall Switch version with HASPmota display support. - **tasmota32-webcam.bin** = The Webcam version adds webcam support for 4M+ flash. - **tasmota32-zbbridgepro.bin** - The Sonoff Zigbee Bridge Pro version with CC2652P firmware load support. Latest released binaries can be downloaded from - https://github.com/arendst/Tasmota-firmware/tree/main/release-firmware - https://ota.tasmota.com/tasmota32/release Historical binaries can be downloaded from - https://ota.tasmota.com/tasmota32/release-13.1.0 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin`` ## Additional information [List](MODULES.md) of embedded modules. [Complete list](BUILDS.md) of available feature and sensors. ## Changelog v13.1.0.4 ### Added - Experimental support for ESP32-C2 and ESP32-C6 using Arduino core v3 - Commands to allow setting of timeprop parameters [#19310](https://github.com/arendst/Tasmota/issues/19310) - Command ``Mi32Name`` [#19619](https://github.com/arendst/Tasmota/issues/19619) - Variables ``%power<1..28>%`` and ``%switch<1..28>%`` to rules [#19331](https://github.com/arendst/Tasmota/issues/19331) - Support different baudrates on BL0942 - Support for Shelly PlusPMMini, Plus1Mini and Plus1PMMini - Support for HDMI CEC protocol [#19434](https://github.com/arendst/Tasmota/issues/19434) - Support for ENS16x (air quality) and ENS210 (temp & RH) sensors [#19479](https://github.com/arendst/Tasmota/issues/19479) - Support for HC8 CO2 sensor [#19714](https://github.com/arendst/Tasmota/issues/19714) - Support for non-persistent ``WebButton17`` to ``WebButton32`` [#19580](https://github.com/arendst/Tasmota/issues/19580) - ESP32 commands ``Ds18Rescan`` and ``Ds18RetryRead`` [#19700](https://github.com/arendst/Tasmota/issues/19700) - ESP32 support for influxdb access using https [#19582](https://github.com/arendst/Tasmota/issues/19582) - Berry read and write Counters [#19558](https://github.com/arendst/Tasmota/issues/19558) - Matter support for Virtual Devices controllable via Rules or Berry [#19520](https://github.com/arendst/Tasmota/issues/19520) ### Breaking Changed - `Sendmail` upgraded to ESP-Mail-Client v3.4.9 from v1.2.0, using BearSSL instead of MbedTLS [#19460](https://github.com/arendst/Tasmota/issues/19460) - Removed support for Homekit in favour of Matter [#19738](https://github.com/arendst/Tasmota/issues/19738) ### Changed - ESP32 Framework (Arduino Core) from v2.0.11 to v2.0.14 - ESP32 LVGL library from v8.3.8 to v8.3.10 (no functional change) - Display invert setting after tasmota start in uDisplay driver [#19337](https://github.com/arendst/Tasmota/issues/19337) - Consolidate SGP40 and SGP41 into SGP4x driver [#19560](https://github.com/arendst/Tasmota/issues/19560) - MAX31855/MAX6675 sensors driver support up to 6 [#19329](https://github.com/arendst/Tasmota/issues/19329) - ESP32 LittleFS updated to version with grow option [#19635](https://github.com/arendst/Tasmota/issues/19635) - ESP32 I2S audio preparation for Arduino Core v3 [#19637](https://github.com/arendst/Tasmota/issues/19637) - ESP32 analog from `analogRead()` to calibrated `analogReadMilliVolts()` [#19732](https://github.com/arendst/Tasmota/issues/19732) ### Fixed - Shutter invert [#19341](https://github.com/arendst/Tasmota/issues/19341) and [#19374](https://github.com/arendst/Tasmota/issues/19374) - Teleinfo power [#19381](https://github.com/arendst/Tasmota/issues/19381) - Exception 3 in IRHVAC [#19389](https://github.com/arendst/Tasmota/issues/19389) - PCF8574 mode 1 with base relays exception 3/28 regression from v12.4.0.4 [#19408](https://github.com/arendst/Tasmota/issues/19408) - ESP32 DS18x20 driver support extended over GPIO33 - ESP32 Support for IPv6 link-local zones for esp-idf 5.1 (necessary for Matter) - ESP32 Shutter migration [#19454](https://github.com/arendst/Tasmota/issues/19454) - ESP32 Shutter multi press button events [#19465](https://github.com/arendst/Tasmota/issues/19465) - ESP32 Shutter button quad press [#19589](https://github.com/arendst/Tasmota/issues/19589) - ESP32 shutter frequency [#19717](https://github.com/arendst/Tasmota/issues/19717) - ESP32 Arduino Core v2 wifi client flush [#19642](https://github.com/arendst/Tasmota/issues/19642) - ESP32 Partition Wizard grow filesystem support [#19645](https://github.com/arendst/Tasmota/issues/19645) - ESP32C3 relay click on restart - Matter support for Virtual Devices controllable via Rules or Berry [#19520](https://github.com/arendst/Tasmota/issues/19520) ### Removed